ZH
RU
ES
How to measure toughness
How to measure toughness, Total:394 items.
In the international standard classification, How to measure toughness involves: Wood, sawlogs and sawn timber, Paint ingredients, Testing of metals, Powder metallurgy, Wood-based panels, Materials for the reinforcement of composites, Plastics, Paints and varnishes, Construction materials, Textile fibres, Sports equipment and facilities, Ceramics, Cutting tools, Conducting materials, Rubber, Non-textile floor coverings, Paper and board, Products of the textile industry, Continuous handling equipment, Accident and disaster control, Glass, Radiation measurements, Pipeline components and pipelines, Welding, brazing and soldering, Non-ferrous metals, Surface treatment and coating, Materials for aerospace construction, Road engineering, Elements of buildings, Products of non-ferrous metals, Processes in the food industry, Rubber and plastics products, Adhesives, Lifting equipment, Test conditions and procedures in general, Reinforced plastics, Mechanical testing, Sacks. Bags, Waxes, bituminous materials and other petroleum products.
CZ-CSN, How to measure toughness
PT-IPQ, How to measure toughness
- NP 148-1958
- NP EN 12256-2000 Plastics piping systems Thermoplastics fittings Test method for mechanical strength or flexibility of fabricated fittings
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, How to measure toughness
- GB/T 1731-1993 Determination of flexibility of films
- GB/T 1748-1979 Method of test for flexibility of putty coatings
- GB/T 4742-1984 Standard test method for lashing toughness of domestic ceramic
- GB/T 23538-2009 Conventional abrasive.Testing method for toughness(Ball mill method)
- GB 4742-1984 Determination method of impact toughness of ceramics for daily use
- GB/T 41694-2022 Security and resilience—Emergency management—Guidelines for monitoring facilities with identified hazards
- GB/T 41932-2022 Plastics—Determination of fracture toughness (GIC and KIC)—Linear elastic fracture mechanics (LEFM) approach
- GB/T 31967.2-2015 Test method for physical property of rare earth permanent magnetic materials.Part 2:Determination of bending strength and fracture toughness
- GB/T 28891-2012 Fibre-reinforced plastic composites.Determination of mode I interlaminar fracture toughness G<下标IC> for unidirectionally reinforced materials
CH-SNV, How to measure toughness
HU-MSZT, How to measure toughness
RU-GOST R, How to measure toughness
- GOST 20571-1975 Modified wood. Method for determination of shock resistance
- GOST 11842-1976 Wood particle boards. Method for determination of resilience
- GOST 16483.4-1973 Wood. Methods for determination of impact bending strength
- GOST 6943.13-1994 Textile glass. Method for determination of stiffness of roving
- GOST 6943.13-1979 Glass textile products. Method of rigidity determination
- GOST 9626-1990 Laminated glued wood. Method for determination of impact viscosity in bending
- GOST 11067-2013 Glass and glass products. Method for determination of mechanical properties. Determination of impact toughness
- GOST R 55657-2013 Modified wood. Methods of plugs strength, hardness and toughness determination
- GOST 473.11-1981 Chemically resistant and heat resistant ceramic ware. The method for determination of resilience
- GOST 11067-1985 Inorganic glass and glass-crystal materials. Method for the determination of impact strength
- GOST 19109-1984 Plastics. Method for determination of Izod impact strength
- GOST R 55400-2013 Reinforced bitumen sheets for waterproofing of bridge decks. Method for determination of flexibility at low temperatures
- GOST 25.506-1985 Design, calculation and strength testing. Methods of mechanical testing of metals. Determination of fracture toughness characteristics under the static loading
- GOST R 56808-2015 Polymer composites. Method for determination interlaminar fracture toughness of unidirectional-reinforced composites
- GOST 33685-2015 Polymer composites. Test method for determination of the interlaminar fracture toughness under shear GIIC
- GOST R 57206-2016 Polymer composites. Test method of determination of the mode II fracture toughness for the calibrated end-loaded split (C-ELS)
- GOST R 55033-2012 Public roads and highways. Geosynthetic for road construction. Test method for determination of flexibility at low temperature
International Organization for Standardization (ISO), How to measure toughness
- ISO 28079:2009 Hardmetals - Palmqvist toughness test
- ISO/TS 28660:2022 Plastics — Determination of J-R curves — Fracture toughness
- ISO 5629:1983 Paper and board; Determination of bending stiffness; Resonance method
- ISO 5629:2017 Paper and board - Determination of bending stiffness - Resonance method
- ISO 12737:2005 Metallic materials - Determination of plane-strain fracture toughness
- ISO 12737:1996 Metallic materials - Determination of the plane-strain fracture toughness
- ISO 12737:2010 Metallic materials — Determination of plane-strain fracture toughness
- ISO 29221:2014 Plastics - Determination of mode I plane-strain crack-arrest toughness
- ISO 15567:1998 Practice for dosimetry in an X-ray (bremsstrahlung) facility for radiation processing
- ISO 11673:2005 Unplasticized poly(vinyl chloride) (PVC-U) pressure pipes - Determination of the fracture toughness properties
- ISO 15653:2018 Metallic materials — Method of test for the determination of quasistatic fracture toughness of welds
- ISO 20267:2017 Thermal spraying - Determination of interfacial toughness of ceramic coatings by indentation
- ISO 12135:2002 Metallic materials - Unified method of test for the determination of quasistatic fracture toughness
- ISO/TS 17958:2013 Paper and board - Determination of fracture toughness - Constant rate of elongation method (1,7 mm/s)
- ISO 12135:2016 Metallic materials - Unified method of test for the determination of quasistatic fracture toughness
- ISO 12135:2021 Metallic materials - Unified method of test for the determination of quasistatic fracture toughness
- ISO 15653:2010 Metallic materials - Method of test for the determination of quasistatic fracture toughness of welds
- ISO 23524:2022 Plastics — Determination of fracture toughness of films and thin sheets — Essential work of fracture (EWF) method
- ISO 13586:2018 Plastics - Determination of fracture toughness (GIC and KIC) - Linear elastic fracture mechanics (LEFM) approach
- ISO 15562:1998 Practice for dosimetry in electron and bremsstrahlung irradiation facilities for food processing
- ISO 13586:2000 Plastics - Determination of fracture toughness (G<(Index)IC> and K<(Index)IC>) - Linear elastic fracture mechanics (LEFM) approach
- ISO 12135:2002/Cor 1:2008 Metallic materials — Unified method of test for the
determination of quasistatic fracture toughness
TECHNICAL CORRIGENDUM 1
- ISO 26843:2015 Metallic materials - Measurement of fracture toughness at impact loading rates using precracked Charpy-type test pieces
- ISO 17281:2002 Plastics - Determination of fracture toughness (G<(Index)IC> and K<(Index)IC>) at moderately high loading rates (1 m/s)
- ISO 17281:2018 Plastics - Determination of fracture toughness (GIC and KIC) at moderately high loading rates (1 m/s)
IPC - Association Connecting Electronics Industries, How to measure toughness
PL-PKN, How to measure toughness
- PN C04255-1988 Rubber vulcanized Determination of resilience with Schob's method
- PN BN 7102-01-1966 Lignofol and lignostone De?ermination of toughness strength
- PN H04335-1987 Metals Test method for piane — strain fracture toughness
- PN H04336-1988 Metals Test method of fracture toughness by measurement critic value J integral, Jlc
Japanese Industrial Standards Committee (JISC), How to measure toughness
- JIS K 7171:2008 Plastics -- Determination of flexural properties
- JIS K 7171:2016 Plastics -- Determination of flexural properties
- JIS K 7171:1994 Plastics -- Determination of flexural properties
- JIS R 1668:2005 Testing method for fracture toughness of porous fine ceramics
- JIS R 1617:2010 Testing method for fracture toughness of fine ceramics at elevated temperature
- JIS Z 2284:1998 Method of elastic-plastic fracture toughness Jic testing for metallic materials in liquid helium
国家市场监督管理总局、中国国家标准化管理委员会, How to measure toughness
- GB/T 1731-2020 Determination of flexibility of coating and putty films
- GB/T 38338-2019 Test method for fracture toughness of carbon materials
- GB/T 38769-2020 Metallic materials－Measurement of fracture toughness at impact loading rates using precracked Charpy-type test pieces
- GB/T 1927.17-2021 Test methods for physical and mechanical properties of small clear wood specimens—Part 17: Determination of impact bending strength
FI-SFS, How to measure toughness
American Society for Testing and Materials (ASTM), How to measure toughness
- ASTM C711-93(1997) Standard Test Method for Low-Temperature Flexibility and Tenacity of One-Part, Elastomeric, Solvent-Release Type Sealants
- ASTM C711-03(2009) Standard Test Method for Low-Temperature Flexibility and Tenacity of One-Part, Elastomeric, Solvent-Release Type Sealants
- ASTM C711-14 Standard Test Method for Low-Temperature Flexibility and Tenacity of One-Part, Elastomeric, Solvent-Release Type Sealants
- ASTM E1820-18ae1 Standard Test Method for Measurement of Fracture Toughness
- ASTM E1820-20a Standard Test Method for Measurement of Fracture Toughness
- ASTM E1820-18 Standard Test Method for Measurement of Fracture Toughness
- ASTM E1820-06 Standard Test Method for Measurement of Fracture Toughness
- ASTM E1820-01 Standard Test Method for Measurement of Fracture Toughness
- ASTM E1820-05 Standard Test Method for Measurement of Fracture Toughness
- ASTM E1820-05a Standard Test Method for Measurement of Fracture Toughness
- ASTM E1820-16 Standard Test Method for Measurement of Fracture Toughness
- ASTM E1820-20b Standard Test Method for Measurement of Fracture Toughness
- ASTM E1820-20 Standard Test Method for Measurement of Fracture Toughness
- ASTM E1820-18a Standard Test Method for Measurement of Fracture Toughness
- ASTM E1820-22 Standard Test Method for Measurement of Fracture Toughness
- ASTM E1820-15ae1 Standard Test Method for Measurement of Fracture Toughness
- ASTM E1820-20ae1 Standard Test Method for Measurement of Fracture Toughness
- ASTM E1820-99a Standard Test Method for Measurement of Fracture Toughness
- ASTM E1820-20e1 Standard Test Method for Measurement of Fracture Toughness
- ASTM E1820-17a Standard Test Method for Measurement of Fracture Toughness
- ASTM E1820-17 Standard Test Method for Measurement of Fracture Toughness
- ASTM E1820-21 Standard Test Method for Measurement of Fracture Toughness
- ASTM E1820-23 Standard Test Method for Measurement of Fracture Toughness
- ASTM E1820-23a Standard Test Method for Measurement of Fracture Toughness
- ASTM E1820-22e1 Standard Test Method for Measurement of Fracture Toughness
- ASTM E1820-15 Standard Test Method for Measurement of Fracture Toughness
- ASTM E1820-11e1 Standard Test Method for Measurement of Fracture Toughness
- ASTM E1820-11e2 Standard Test Method for Measurement of Fracture Toughness
- ASTM E1820-06e1 Standard Test Method for Measurement of Fracture Toughness
- ASTM E1820-08 Standard Test Method for Measurement of Fracture Toughness
- ASTM E1820-08a Standard Test Method for Measurement of Fracture Toughness
- ASTM E1820-09 Standard Test Method for Measurement of Fracture Toughness
- ASTM E1820-09e1 Standard Test Method for Measurement of Fracture Toughness
- ASTM E1820-11 Standard Test Method for Measurement of Fracture Toughness
- ASTM E1820-13e1 Standard Test Method for Measurement of Fracture Toughness
- ASTM E1820-23b Standard Test Method for Measurement of Fracture Toughness
- ASTM F911-85(1994) Standard Test Method for Flexibility of Running Shoes (Withdrawn 2002)
- ASTM F2031-05 Standard Test Method for Measurement of Arrow Shaft Static Spine (Stiffness)
- ASTM F2031-00 Standard Test Method for Measurement of Arrow Shaft Static Spine (Stiffness)
- ASTM F2031-05(2010) Standard Test Method for Measurement of Arrow Shaft Static Spine (Stiffness)
- ASTM F2031-05(2014) Standard Test Method for Measurement of Arrow Shaft Static Spine (Stiffness)
- ASTM B645-07 Standard Practice for Linear-Elastic Plane-Strain Fracture Toughness Testing of Aluminum Alloys
- ASTM E2818-11 Standard Practice for Determination of Quasistatic Fracture Toughness of Welds
- ASTM C1421-01a Standard Test Methods for Determination of Fracture Toughness of Advanced Ceramics at Ambient Temperatures
- ASTM E1290-99 Standard Test Method for Crack-Tip Opening Displacement (CTOD) Fracture Toughness Measurement
- ASTM C1421-01b(2007) Standard Test Methods for Determination of Fracture Toughness of Advanced Ceramics at Ambient Temperature
- ASTM C1421-09 Standard Test Methods for Determination of Fracture Toughness of Advanced Ceramics at Ambient Temperature
- ASTM C1421-10 Standard Test Methods for Determination of Fracture Toughness of Advanced Ceramics at Ambient Temperature
- ASTM D7779-20 Standard Test Method for Determination of Fracture Toughness of Graphite at Ambient Temperature
- ASTM E1290-08 Standard Test Method for Crack-Tip Opening Displacement (CTOD) Fracture Toughness Measurement
- ASTM E399-12 Standard Test Method for Linear-Elastic Plane-Strain Fracture Toughness K Ic of Metallic Materials
- ASTM E399-12e1 Standard Test Method for Linear-Elastic Plane-Strain Fracture Toughness KIc of Metallic Materials
- ASTM D7779-11 Standard Test Method for Determination of Fracture Toughness of Graphite at Ambient Temperature
- ASTM F137-08(2018) Standard Test Method for Flexibility of Resilient Flooring Materials with Cylindrical Mandrel Apparatus
- ASTM E1290-02e1 Standard Test Method for Crack-Tip Opening Displacement (CTOD) Fracture Toughness Measurement
- ASTM E1290-02 Standard Test Method for Crack-Tip Opening Displacement (CTOD) Fracture Toughness Measurement
- ASTM C1421-99 Standard Test Methods for Determination of Fracture Toughness of Advanced Ceramics at Ambient Temperatures
- ASTM E1290-07e1 Standard Test Method for Crack-Tip Opening Displacement (CTOD) Fracture Toughness Measurement
- ASTM E1221-12a(2018) Standard Test Method for Determining Plane-Strain Crack-Arrest Fracture Toughness, KIa, of Ferritic Steels
- ASTM D2861-87(1998) Standard Test Methods for Flexible Composites of Copper Foil with Dielectric Film or Treated Fabrics
- ASTM E1221-12A(2018)e1 Standard Test Method for Determining Plane-Strain Crack-Arrest Fracture Toughness, KIa, of Ferritic Steels
- ASTM C1421-15 Standard Test Methods for Determination of Fracture Toughness of Advanced Ceramics at Ambient Temperature
- ASTM C1421-01b Standard Test Methods for Determination of Fracture Toughness of Advanced Ceramics at Ambient Temperature
- ASTM E1221-96 Standard Test Method for Determining Plane-Strain Crack-Arrest Fracture Toughness, KIa, of Ferritic Steels
- ASTM E1221-96(2002) Standard Test Method for Determining Plane-Strain Crack-Arrest Fracture Toughness, KIa, of Ferritic Steels
- ASTM A350/A350M-17 Standard Specification for Carbon and Low-Alloy Steel Forgings, Requiring Notch Toughness Testing for Piping Components
- ASTM A350/A350M-04 Standard Specification for Carbon and Low-Alloy Steel Forgings, Requiring Notch Toughness Testing for Piping Components
- ASTM A350/A350M-04a Standard Specification for Carbon and Low-Alloy Steel Forgings, Requiring Notch Toughness Testing for Piping Components
- ASTM A350/A350M-00b Standard Specification for Carbon and Low-Alloy Steel Forgings, Requiring Notch Toughness Testing for Piping Components
- ASTM A350/A350M-02 Standard Specification for Carbon and Low-Alloy Steel Forgings, Requiring Notch Toughness Testing for Piping Components
- ASTM A350/A350M-02b Standard Specification for Carbon and Low-Alloy Steel Forgings, Requiring Notch Toughness Testing for Piping Components
- ASTM A350/A350M-02a Standard Specification for Carbon and Low-Alloy Steel Forgings, Requiring Notch Toughness Testing for Piping Components
- ASTM A350/A350M-00c Standard Specification for Carbon and Low-Alloy Steel Forgings, Requiring Notch Toughness Testing for Piping Components
- ASTM A350/A350M-97 Standard Specification for Carbon and Low-Alloy Steel Forgings, Requiring Notch Toughness Testing for Piping Components
- ASTM E1221-12 Standard Test Method for Determining Plane-Strain Crack-Arrest Fracture Toughness, KIa, of Ferritic Steels
- ASTM E1922-04(2015) Standard Test Method for Translaminar Fracture Toughness of Laminated and Pultruded Polymer Matrix Composite Materials
- ASTM A350/A350M-18 Standard Specification for Carbon and Low-Alloy Steel Forgings, Requiring Notch Toughness Testing for Piping Components
- ASTM E1221-12a Standard Test Method for Determining Plane-Strain Crack-Arrest Fracture Toughness, KIa, of Ferritic Steels
- ASTM A350/A350M-15 Standard Specification for Carbon and Low-Alloy Steel Forgings, Requiring Notch Toughness Testing for Piping Components
- ASTM F2136-01e1 Standard Test Method for Notched, Constant Ligament-Stress (NCLS) Test to Determine Slow-Crack-Growth Resistance of HDPE Resins or HDPE Corrugated Pipe
- ASTM F2136-08 Standard Test Method for Notched, Constant Ligament-Stress (NCLS) Test to Determine Slow-Crack-Growth Resistance of HDPE Resins or HDPE Corrugated Pipe
- ASTM F2136-18 Standard Test Method for Notched, Constant Ligament-Stress (NCLS) Test to Determine Slow-Crack-Growth Resistance of HDPE Resins or HDPE Corrugated Pipe
- ASTM E1221-06 Standard Test Method for Determining Plane-Strain Crack-Arrest Fracture Toughness, KIa, of Ferritic Steels
- ASTM D7905/D7905M-19 Standard Test Method for Determination of the Mode II Interlaminar Fracture Toughness of Unidirectional Fiber-Reinforced Polymer Matrix Composites
- ASTM D7905/D7905M-19e1 Standard Test Method for Determination of the Mode II Interlaminar Fracture Toughness of Unidirectional Fiber-Reinforced Polymer Matrix Composites
Indonesia Standards, How to measure toughness
SE-SIS, How to measure toughness
- MNC 328-1990 Metallic materials — Testing — Impact toughness — Summary
American National Standards Institute （ANSI), How to measure toughness
- ANSI/ASTM F2031:2005 TEST METHOD FOR MEASUREMENT OF ARROW SHAFT STATIC SPINE STIFFNESS
- ANSI/ASTM D7779:2011 Test Method for Determination of Fracture Toughness of Graphite at Ambient Temperature
- ANSI/ASTM D2861:1998 Test Methods for Flexible Composites of Copper Foil with Dielectric Film or Treated Fabrics
中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, How to measure toughness
Association Francaise de Normalisation, How to measure toughness
- NF ISO 3060:2017 Fibres de coton- Détermination de la ténacité de rupture des faisceaux plats
- NF G07-080:1972 Method for determination of breaking tenacity of flat bundles of cotton fibers.
- NF A03-180:2006 Metallic materials - Determination of plane-strain fracture toughness.
- NF EN ISO 17235:2016 Cuir - Essais physiques et mécaniques - Détermination de la souplesse
- NF G07-307:1987 Textiles - Essais des fibres - Détermination de la ténacité de rupture des faisceaux de fibres de laine.
- NF EN 15813:2011 Revêtements bitumineux épais modifiés aux polymères pour imperméabilisation - Détermination de la souplesse à basse température
- NF EN 3102:2014 Série aérospatiale - Produits d'étanchéité - Methodes d'essai - Détermination de la flexibilité à basse température
- NF EN 1735:1997 Supports textiles revêtus de caoutchouc ou de plastique - Détermination de la souplesse
- NF A89-217*NF EN ISO 15653:2018 Metallic materials - Method of test for the determination of quasistatic fracture toughness of welds
- NF EN ISO 15653:2018 Matériaux métalliques - Méthode d'essai pour la détermination de la ténacité quasi statique à la rupture des soudures
- NF A89-217:2010 Metallic materials - Method of test for the determination of quasistatic fracture toughness of welds.
- NF L17-099*NF EN 3102:2014 Aerospace series - Sealants - Test methods - Determination of low-temperature flexibility
- NF T54-110:1971 Plastics. Thin sheets. Determination of pliability limit temperature.(looped test piece impact test).
- NF EN 12964:2001 Adhésifs pour cuir et matériaux pour articles chaussants - Adhésifs à haute ténacité - Contrôle de la résistance à la chaleur des joints à une température élevée
- NF EN ISO 18756:2005 Céramiques techniques - Détermination de la ténacité à la rupture des céramiques monolithiques à température ambiante par fissuration superficielle en flexion
- NF EN 12703:2016 Adhésifs pour papier et carton, emballage et produits sanitaires jetables - Détermination de la flexibilité à basse température ou de la température de fissuration à froid
- NF T76-315:2012 Adhesives for paper and board, packaging and disposable sanitary products - Determination of low temperature flexibility or cold crack temperature.
- NF T76-315*NF EN 12703:2016 Adhesives for paper and board, packaging and disposable sanitary products - Determination of low temperature flexibility or cold crack temperature
- NF L17-924*NF EN 4504:2017 Aerospace series - Non-metallic materials, Textiles - Test method - Determination of flexibility of narrow fabrics
- NF EN 4504:2017 Série aérospatiale - Matériaux non-métalliques, textiles - Méthode d'essai - Détermination de la flexibilité des tissus étroits
- XP T66-078*XP CEN/TS 15963:2014 Bitumen and bituminous binders - Determination of the fracture toughness temperature by a three point bending test on a notched specimen
- NF EN ISO 24370:2023 Céramiques techniques - Méthode d'essai de ténacité à la rupture des céramiques monolithiques à température ambiante sur éprouvette entaillée en chevron
- NF L17-025*NF EN 6033:2016 Aerospace series - Carbon fibre reinforced plastics - Test method - Determination of interlaminar fracture toughness energy - Mode I GIC
- NF EN ISO 23146:2016 Céramiques techniques - Méthodes d'essai pour la détermination de la ténacité à la rupture des céramiques monolithiques - Méthode sur éprouvette à entaille en V sur une seule face (Méthode SEVNB)
- NF L17-026*NF EN 6034:2016 Aerospace series - Carbon fibre reinforced plastics - Test method - Determination of interlaminar fracture toughness energy - Mode II - GIIC
- NF EN 6034:2016 Série aérospatiale - Matières plastiques renforcées de fibres de carbone - Méthode d'essai - Détermination de l'énergie de ténacité en rupture interlaminaire - Mode II - GIIC
- NF EN 6033:2016 Série aérospatiale - Matières plastiques renforcées de fibres de carbone - Méthode d'essai - Détermination de l'énergie de ténacité en rupture interlaminaire - Mode I - GIC
British Standards Institution (BSI), How to measure toughness
- PD ISO/TS 28660:2022 Plastics. Determination of J-R curves. Fracture toughness
- BS 6729:1987 Method for determination of the dynamic fracture toughness of metallic materials
- BS EN ISO 12737:2005 Metallic materials - Determination of plane-strain fracture toughness
- BS EN ISO 12737:2011 Metallic materials. Determination of plane-strain fracture toughness
- BS EN ISO 12737:2006 Metallic materials. Determination of plane-strain fracture toughness
- BS EN ISO 12737:2010 Metallic materials. Determination of plane-strain fracture toughness
- BS ISO 29221:2014 Plastics. Determination of mode I plane-strain crack-arrest toughness
- BS CWA 17793:2021 Test method for determination of the essential work of fracture of thin ductile metallic sheets
- PD ISO/TR 21704:2017 Toughness of round steel link chains. Test with sub-size specimens
- BS ISO 20267:2017 Thermal spraying. Determination of interfacial toughness of ceramic coatings by indentation
- PD ISO/TS 17958:2013 Paper and board. Determination of fracture toughness. Constant rate of elongation method (1,7 mm/s)
- BS ISO 12135:2021 Metallic materials. Unified method of test for the determination of quasistatic fracture toughness
- BS EN ISO 15653:2010 Metallic materials - Method of test for the determination of quasistatic fracture toughness of welds
- BS EN 3102:2013 Aerospace series. Sealants. Test methods. Determination of low-temperature flexibility
- BS 7448-3:2005 Fracture mechanics toughness tests - Part 3.Method for determination of fracture toughness of metallic materials at rates of increase in stress intensity factor greater than 3.0 MPa m0.5 s-1
- BS ISO 20064:2019 Metallic materials. Steel. Method of test for the determination of brittle crack arrest toughness, Kca
- BS ISO 17281:2002 Plastics - Determination of fracture toughness (Gic and Kic) at moderately high loading rates (1 m/s)
- 17/30290146 DC BS ISO 18485. Peel test for the determination of interlaminar fracture toughness of flexible packaging laminates
- BS ISO 23524:2022 Plastics. Determination of fracture toughness of films and thin sheets. Essential work of fracture (EWF) method
- 15/30293838 DC BS ISO 12135. Metallic materials. Unified method of test for the determination of quasistatic fracture toughness
- 20/30394397 DC BS ISO 12135. Metallic materials. Unified method of test for the determination of quasistatic fracture toughness
- BS 2782-3 Method 365A:1976 Methods of testing plastics - Mechanical properties - Determination of softness number of flexible plastics materials
- BS 903-A13:1990 Physical testing of rubber - Method for determination of stiffness at low temperature (Gehman test)
- BS EN ISO 15653:2018 Tracked Changes. Metallic materials. Method of test for the determination of quasistatic fracture toughness of welds
- 22/30389141 DC BS ISO 23524. Plastics. Determination of fracture toughness of films and thin sheets: the essential work of fracture (EWF) method
- BS EN 12703:2012 Adhesives for paper and board, packaging and disposable sanitary products. Determination of low temperature flexibility or cold crack temperature
- BS EN 12703:2016 Adhesives for paper and board, packaging and disposable sanitary products. Determination of low temperature flexibility or cold crack temperature
- BS ISO 13586:2000 Plastics - Determination of fracture toughness (Gic and Kic) - Linear elastic fracture mechanics (LEFM) approach
- BS ISO 13586:2018 Plastics. Determination of fracture toughness (GIC and KIC). Linear elastic fracture mechanics (LEFM) approach
- BS ISO 15567:1998 Practice for dosimetry in an X-ray (bremsstrahlung) facility for radiation processing
- BS 8571:2014 Method of test for determination of fracture toughness in metallic materials using single edge notched tension (SENT) specimens
- BS ISO 15567:1999 Practice for dosimetry in an X-ray (bremsstrahlung) facility for radiation processing
- BS ISO 26843:2015 Metallic materials. Measurement of fracture toughness at impact loading rates using precracked Charpy-type test pieces
- BS EN ISO 10619-1:2018 Tracked Changes. Rubber and plastics hoses and tubing. Measurement of flexibility and stiffness. Bending tests at ambient temperature
- BS ISO 15024:2002 Fibre-reinforced plastic composites. Determination of mode I interlaminar fracture toughness, $iGic, for unidirectionally reinforced materials
- BS 7448-1:1991 Fracture mechanics toughness tests - Method for determination of KIc, critical CTOD and critical J values of metallic materials
- BS ISO 15562:1999 Practice for dosimetry in electron and bremsstrahlung irradiation facilities for food processing
- BS DD CEN/TS 14425-3:2003 Advanced technical ceramics - Test methods for determination of fracture toughness of monolithic ceramics - Part 3:Chevron notched beam (CNB) method
- BS DD CEN/TS 14425-3:2004 Advanced technical ceramics - Test methods for determination of fracture toughness of monolithic ceramics - Chevron notched beam (CNB) method
- BS ISO 15562:1998 Practice for dosimetry in electron and bremsstrahlung irradiation facilities for food processing
- BS ISO 15024:2023 Fibre-reinforced plastic composites. Determination of mode I interlaminar fracture toughness, GIC, for unidirectionally reinforced materials
- BS DD CEN/TS 14425-1:2003 Advanced technical ceramics - Test methods for determination of fracture toughness of monolithic ceramics - Guide to test method selection
- DD CEN/TS 14425-1:2003 Advanced technical ceramics - Test methods for determination of fracture toughness of monolithic ceramics - Guide to test method selection
- BS EN ISO 10619-2:2021 Tracked Changes. Rubber and plastics hoses and tubing. Measurement of flexibility and stiffness. Bending tests at sub-ambient temperatures
- BS PD CEN/TS 15963:2014 Bitumen and bituminous binders. Determination of the fracture toughness temperature by a three point bending test on a notched specimen
- BS DD CEN/TS 15963:2010 Bitumen and bituminous binders - Determination of the fracture toughness temperature by a three point bending test on a notched specimen
- BS DD CEN/TS 14425-5:2004 Advanced technical ceramics-Test methods for determination of fracture toughness of monolithic ceramics-Part 5:Single-edge vee-notch beam (SEVNB) method
- BS DD CEN/TS 14425-5:2005 Advanced technical ceramics. Test methods for determination of fracture toughness of monolithic ceramics. Single-edge vee-notch beam (SEVNB) method
- BS 8571:2018 Tracked Changes. Method of test for determination of fracture toughness in metallic materials using single edge notched tension (SENT) specimens
- DD CEN/TS 14425-5:2004 Advanced technical ceramics. Test methods for determination of fracture toughness of monolithic ceramics. Single-edge vee-notch beam (SEVNB) method
Korean Agency for Technology and Standards (KATS), How to measure toughness
- KS L 1600-2010(2020) Testing methods for fracture toughness of high performance ceramics
- KS M ISO 4662:2020 Rubber, vulcanized or thermoplastic — Determination of rebound resilience
- KS L 6520-1988(1998) TESTING METHOD FOR TOUGHNESS OF ARTIFICIAL ABRASIVES (BALL MILL TEST)
- KS L 6520-1986 TESTING METHOD FOR TOUGHNESS OF ARTIFICIAL ABRASIVES (BALL MILL TEST)
- KS K ISO 24344-2010(2020) Resilient floor coverings－Determination of flexibility and deflection
- KS M ISO 5629:2007 Paper and board-Determination of bending stiffness-Resonance method
- KS K 0539-2006 Determination of flexural stiffness of fabrics：Flexometer method
- KS M ISO 5629:2017 Paper and board－Determination of bending stiffness－Resonance method
- KS B ISO 12737:2002 Metallic materials-Determination of plane-strain fracture toughness
- KS B ISO 12737:2015 Metallic materials－Determination of plane－strain fracture toughness
- KS L 1608-1994 Testing method for fracture toughness of fine ceramics at elevated temperature
- KS L 1608-2014 Testing method for fracture toughness of fines ceramics at elevated temperature
- KS M ISO 13586-2012(2022) Plastics－Determination of fracture toughness(GIC and KIC)－Linear elastic fracture mechanics(LEFM) approach
- KS M ISO 11673:2005 Unplasticized polyvinylchloride(PVC-U) pressure pipes-Determination of the fracture toughness properties
- KS M ISO 5979-2009(2019) Rubber or plastics coated fabrics－Determination of flexibility－Flat loop method
- KS M ISO 13586:2012 Plastics－Determination of fracture toughness(GIC and KIC)－Linear elastic fracture mechanics(LEFM) approach
- KS M ISO 13586-2012(2017) Plastics－Determination of fracture toughness(GIC and KIC)－Linear elastic fracture mechanics(LEFM) approach
- KS M ISO 17958:2014 Paper and board — Determination of fracture toughness — Constant rate of elongation method(1.7 mm/s)
- KS M ISO 11673-2005(2020) Unplasticized polyvinylchloride(PVC－U) pressure pipes－Determination of the fracture toughness properties
- KS D ISO 12135:2005 Metallic materials-Unified method of test for the determination of quasistatic fracture toughness
- KS D ISO 12135-2005(2010) Metallic materials－Unified method of test for the determination of quasistatic fracture toughness
- KS D ISO 12135:2013 Metallic materials－Unified method of test for the determination of quasistatic fracture toughness
- KS M ISO 13968:2008 Plastics piping and ducting systems-Thermoplastics pipes-Determination of ring flexibility
- KS M ISO 13968:2015 Plastics piping and ducting systems — Thermoplastics pipes — Determination of ring flexibility
- KS M ISO 17281-2007(2017) Plastics－Determination of fracture toughness (GIC and KIC) at moderately high loading rates(1 m/s)
- KS M ISO 17281-2007(2022) Plastics－Determination of fracture toughness (GIC and KIC) at moderately high loading rates(1 m/s)
- KS M ISO TS 17958:2020 Paper and board — Determination of fracture toughness —Constant rate of elongation method(1.7 mm/s)
- KS M ISO 13586:2007 Plastics--Determination of fracture toughness (GIC and KIC)--Linear elastic fracture mechanics(LEFM) approach
- KS M ISO 17281:2007 Plastics－Determination of fracture toughness (GIC and KIC) at moderately high loading rates(1 m/s)
KR-KS, How to measure toughness
- KS M ISO 4662-2020 Rubber, vulcanized or thermoplastic — Determination of rebound resilience
- KS M ISO TS 17958-2020 Paper and board — Determination of fracture toughness —Constant rate of elongation method(1.7 mm/s)
German Institute for Standardization, How to measure toughness
- DIN EN ISO 703:2017-06 Conveyor belts - Transverse flexibility (troughability) - Test method (ISO 703:2017); German version EN ISO 703:2017
- DIN EN ISO 24344:2012-04 Resilient floor coverings - Determination of flexibility and deflection (ISO 24344:2008); German version EN ISO 24344:2012
- DIN EN ISO 12737:2005 Metallic materials - Determination of plane-strain fracture toughness (ISO 12737:2005); English version of DIN EN ISO 12737
- DIN EN 1735:1997-02 Rubber- or plastics coated fabrics - Determination of flexibility; German version EN 1735:1996
- DIN EN 1735:1997 Rubber- or plastics coated fabrics - Determination of flexibility; German version EN 1735:1996
- DIN EN 15813:2011-06 Polymer modified bituminous thick coatings for waterproofing - Determination of flexibility at low temperatures; German version EN 15813:2011
- DIN EN ISO 13968:2009-01 Plastics piping and ducting systems - Thermoplastics pipes - Determination of ring flexibility (ISO 13968:2008); German version EN ISO 13968:2008
- DIN EN ISO 15653:2018-06 Metallic materials - Method of test for the determination of quasistatic fracture toughness of welds (ISO 15653:2018); German version EN ISO 15653:2018
- DIN EN ISO 15653:2018 Metallic materials - Method of test for the determination of quasistatic fracture toughness of welds (ISO 15653:2018)
- DIN EN 15813:2011 Polymer modified bituminous thick coatings for waterproofing - Determination of flexibility at low temperatures; German version EN 15813:2011
- DIN EN ISO 12737:2011 Metallic materials - Determination of plane-strain fracture toughness (ISO 12737:2010); German version EN ISO 12737:2010
- DIN EN ISO 15653:2010 Metallic materials - Method of test for the determination of quasistatic fracture toughness of welds (ISO 15653:2010); German version EN ISO 15653:2010
- DIN EN 6033:2016 Aerospace series - Carbon fibre reinforced plastics - Test method - Determination of interlaminar fracture toughness energy - Mode I - GIC; German and English version EN 6033:2015
- DIN EN 3102:2013 Aerospace series - Sealants - Test methods - Determination of low-temperature flexibility; German and English version EN 3102:2013
- DIN EN 3102:2013-05 Aerospace series - Sealants - Test methods - Determination of low-temperature flexibility; German and English version EN 3102:2013
- DIN EN 6033:2016-02 Aerospace series - Carbon fibre reinforced plastics - Test method - Determination of interlaminar fracture toughness energy - Mode I - GIC; German and English version EN 6033:2015
- DIN EN 12703:2016-10 Adhesives for paper and board, packaging and disposable sanitary products - Determination of low temperature flexibility or cold crack temperature; German version EN 12703:2016
National Metrological Technical Specifications of the People's Republic of China, How to measure toughness
Professional Standard - Forestry, How to measure toughness
- LY/T 1407-1999 Laminated wood plastics.Compreg Determination of impact resistance parallel to glueline
European Committee for Standardization (CEN), How to measure toughness
- EN 12503-7:2001 Sports mats - Part 7: Determination of static stiffness
- EN ISO 12737:1999 Metallic Materials - Determination of Plane-Strain Fracture Toughness
- EN 15813:2011 Polymer modified bituminous thick coatings for waterproofing - Determination of flexibility at low temperatures
- EN 3102:2013 Aerospace series - Sealants - Test methods - Determination of low-temperature flexibility
- EN ISO 15653:2010 Metallic materials - Method of test for the determination of quasistatic fracture toughness of welds (ISO 15653:2010)
- EN 12310-1:1999 Flexible sheets for waterproofing - Part 1: Bitumen sheets for roof waterproofing - Determination of resistance to tearing (nail shank)
- EN 12316-1:1999 Flexible sheets for waterproofing - Part 1: Bitumen sheets for roof waterproofing - Determination of peel resistance of joints
- EN 12317-1:1999 Flexible sheets for waterproofing - Part 1: Bitumen sheets for roof waterproofing - Determination of shear resistance of joints
- EN 13111:2001 Flexible Sheets for Waterproofing - Underlays for Discontinuous Roofing and Walls - Determination of Resistance to Water Penetration
- EN 12310-2:2000 Flexible sheets for waterproofing - Determination of resistance to tearing - Part 2: Plastic and rubber sheets for roof waterproofing
- EN 1850-1:1999 Flexible sheets for waterproofing - Determination of visible defects - Part 1: Bitumen sheets for roof waterproofing
- EN 12317-2:2000 Flexible Sheets for Waterproofing - Determination of Shear Resistance of Joints - Part 2: Plastic and Rubber Sheets for Roof Waterproofing
- EN 12317-2:2010 Flexible sheets for waterproofing - Determination of shear resistance of joints - Part 2: Plastic and rubber sheets for roof waterproofing
- EN 12703:1999 Adhesives for Paper and Board, Packaging and Disposable Sanitary Products - Determination of Low Temperature Flexibility or Cold Crack Temp
- EN 6033:2015 Aerospace series - Carbon fibre reinforced plastics - Test method - Determination of interlaminar fracture toughness energy - Mode I - GIC
- EN 6034:2015 Aerospace series - Carbon fibre reinforced plastics - Test method - Determination of interlaminar fracture toughness energy - Mode II - GIIC
- EN 1850-2:2001 Flexible sheets for waterproofing - Determination of visible defects - Part 2: Plastic and rubber sheets for roof waterproofing
- EN 1849-1:1999 Flexible sheets for waterproofing - Determination of thickness and mass per unit area - Part 1: Bitumen sheets for roof waterproofing
- EN 843-7:2010 Advanced technical ceramics - Mechanical properties of monolithic ceramics at room temperature - Part 7: C-ring tests
- EN 12703:2016 Adhesives for paper and board@ packaging and disposable sanitary products - Determination of low temperature flexibility or cold crack temperature
- PD CEN/TS 15963:2014 Bitumen and bituminous binders - Determination of the fracture toughness temperature by a three point bending test on a notched specimen
Society of Automotive Engineers (SAE), How to measure toughness
- SAE ARP1704-1981 SHORT-BAR FRACTURE TOUGHNESS OF METALLIC MATERIALS Determination of
- SAE ARP1704A-1981 Short-Bar Fracture Toughness of Metallic Materials, Determination Of
SAE - SAE International, How to measure toughness
- SAE ARP1704A-1993 SHORT-BAR FRACTURE TOUGHNESS OF METALLIC MATERIALS@ DETERMINATION OF
Danish Standards Foundation, How to measure toughness
- DS/EN ISO 24344:2012 Resilient floor coverings - Determination of flexibility and deflection
- DS/EN 1735:1997 Rubber- or plastics-coated fabrics - Determination of flexibility
- DS/EN ISO 13968:2008 Plastics piping and ducting systems - Thermoplastics pipes - Determination of ring flexibility
- DS/EN ISO 15653:2010 Metallic materials - Method of test for the determination of quasistatic fracture toughness of welds
- DS/EN 1109:2013 Flexible sheets for waterproofing - Bitumen sheets for roof waterproofing - Determination of flexibility at low temperature
- DS/EN 4504:2013 Aerospace series - Non-metallic materials, Textiles - Test method - Determination of flexibility of narrow fabrics
- DS/CEN/TS 15963:2010 Bitumen and bituminous binders - Determination of the fracture toughness temperature by a three point bending test on a notched specimen
- DS/EN 14425-3:2010 Advanced technical ceramics - Test methods for determination of fracture toughness of monolithic ceramics - Part 3: Chevron notched beam (CNB) method
IN-BIS, How to measure toughness
Lithuanian Standards Office , How to measure toughness
- LST EN ISO 703:2007 Conveyor belts - Transverse flexibility (troughability) - Test method (ISO 703:2007)
- LST EN 1735-2000 Rubber- or plastics coated fabrics - Determination of flexibility
- LST EN ISO 24344:2012 Resilient floor coverings - Determination of flexibility and deflection (ISO 24344:2008)
- LST EN 1109-2001 Flexible sheets for waterproofing - Bitumen sheets for roof waterproofing - Determination of flexibility at low temperature
- LST EN ISO 13968:2009 Plastics piping and ducting systems - Thermoplastics pipes - Determination of ring flexibility (ISO 13968:2008)
- LST EN 1109-2013 Flexible sheets for waterproofing - Bitumen sheets for roof waterproofing - Determination of flexibility at low temperature
- LST EN ISO 15653:2010 Metallic materials - Method of test for the determination of quasistatic fracture toughness of welds (ISO 15653:2010)
- LST EN 14425-3-2010 Advanced technical ceramics - Test methods for determination of fracture toughness of monolithic ceramics - Part 3: Chevron notched beam (CNB) method
RO-ASRO, How to measure toughness
- STAS 8916-1971 SAFETY RUBBER FOOT WEAR Determination of the flexiblily and lightness
- STAS 6483/6-1978 BAST FIBRES Determination of flax and hemp bundle flexibility
ES-AENOR, How to measure toughness
CEN - European Committee for Standardization, How to measure toughness
- EN ISO 12737:2010 Metallic materials - Determination of plane-strain fracture toughness
- EN ISO 12737:2005 Metallic materials - Determination of plane-strain fracture toughness
- EN ISO 15653:2018 Metallic materials - Method of test for the determination of quasistatic fracture toughness of welds
AENOR, How to measure toughness
- UNE-EN 1735:1997 Rubber- or plastics coated fabrics - Determination of flexibility
- UNE-EN ISO 24344:2012 Resilient floor coverings - Determination of flexibility and deflection (ISO 24344:2008)
- UNE-EN 1109:2013 Flexible sheets for waterproofing - Bitumen sheets for roof waterproofing - Determination of flexibility at low temperature
- UNE-EN ISO 13968:2009 Plastics piping and ducting systems - Thermoplastics pipes - Determination of ring flexibility (ISO 13968:2008)
- UNE-EN ISO 15653:2011 Metallic materials - Method of test for the determination of quasistatic fracture toughness of welds (ISO 15653:2010)
未注明发布机构, How to measure toughness
- DIN EN ISO 12737:1999 Metallic materials – Determination of plane-strain fracture toughness
- BS EN 1446:1996 Plastics piping and ducting systems - Thermoplastics pipes - Determination of ring flexibility
- BS 7448-3:2005(2007) Fracture mechanics toughness tests — Part 3 : Method for determination of fracture toughness of metallic materials at rates of increase in stress intensity factor greater than 3.0 MPa · m0.5 sp1
- BS 7448-1:1991(2002) Fracture mechanics toughness tests — Part 1 : Method for determination of KIc, critical CTOD and critical J values of metallic materials
- BS PD CEN TS 15963:2014 Bitumen and bituminous binders — Determination of the fracture toughness temperature by a three point bending test on a notched specimen
AR-IRAM, How to measure toughness
Professional Standard - Machinery, How to measure toughness
- JB/T 10646-2006 Super abrasive Determination of thermal impact toughness of diamond
- JB/T 10987-2010 Superabrasive-Determination of toughness index of synthetic diamond
- JB/T 12616-2016 Inspection methods of fracture toughness for hardmetals tool base material
- JB/T 6571-1993 Method for measuring impact ductility of man-made diamond and borazon
WRC - Welding Research Council, How to measure toughness
- BULLETIN 266-1981 WELDABILITY AND FRACTURE TOUGHNESS OF 5% NI STEEL – PART 1: WELD SIMULATION TESTING ; WELDABILITY AND FRACTURE TOUGHNESS OF 5% NI STEEL – PART 2: WIDE PLATE TESTING
- BULLETIN 279-1982 WELDABILITY AND FRACTURE TOUGHNESS OF QUENCHED AND TEMPERED 9% NICKEL STEEL: PART I – WELD SIMULATION TESTING; AND PART II – WIDE PLATE TESTING
The Aluminum Association, How to measure toughness
- AA T-5-1987 Position on Fracture Toughness Requirements and Quality Control Testing
ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, How to measure toughness
- PREN 3102-1996 Aerospace Series Sealants Test Methods Determination of Low-Temperature Flexibility
- PREN 4504-1999 Aerospace Series Textiles Test Method Determination of Flexibility of Narrow Fabrics
- PREN 4504-2001 Aerospace Series Non-Metallic Materials Textiles Test Method Determination of Flexibility of Narrow Fabrics (Edition P 1)
CU-NC, How to measure toughness
- NC 40-155-1988 Textile Industry. Determination of Tensile-Breaking Strength and Toughness of Threads in Hanks. Testing Method
YU-JUS, How to measure toughness
- JUS Z.M3.036-1989 Packing. Sacks made from thermoplastic flexible film. Description and method of measurement
- JUS C.A4.084-1995 Mechanical testing of metals - Methods of tests for plane strain fracture toughness (K IC)
- JUS G.S2.637-1985 Plastics. Testing of industrial laminates. Wedging test for industrial laminated sheets
IT-UNI, How to measure toughness
ES-UNE, How to measure toughness
- UNE-EN ISO 15653:2018 Metallic materials - Method of test for the determination of quasistatic fracture toughness of welds (ISO 15653:2018)
- UNE-EN 3102:2013 Aerospace series - Sealants - Test methods - Determination of low-temperature flexibility (Endorsed by AENOR in April of 2013.)
- UNE-EN 12703:2017 Adhesives for paper and board, packaging and disposable sanitary products - Determination of low temperature flexibility or cold crack temperature
- UNE-EN 4504:2013 Aerospace series - Non-metallic materials, Textiles - Test method - Determination of flexibility of narrow fabrics
- UNE-EN 6033:2015 Aerospace series - Carbon fibre reinforced plastics - Test method - Determination of interlaminar fracture toughness energy - Mode I - GIC (Endorsed by AENOR in January of 2016.)
- UNE-EN 6034:2015 Aerospace series - Carbon fibre reinforced plastics - Test method - Determination of interlaminar fracture toughness energy - Mode II - GIIC (Endorsed by AENOR in January of 2016.)
American Welding Society (AWS), How to measure toughness
- WRC 279:1982 Part 1: Weldability and Fracture Toughness of Quenched and Tempered 9% Nickel Steel: Weld Simulation Testing
- WRC 266:1981 Part 1: Weldability and Fracture Toughness of 5% Ni Steel-Part 1: Weld Simulation Testing
VN-TCVN, How to measure toughness
- TCVN 7427-1-2014 Leather - Determination of water resistance of flexible leather .Part 1:Repeated linear compression (penetrometer)
TR-TSE, How to measure toughness
- TS 1005-1971 PLASTICS DETERMINATION OF THE IZOD IMPACT RESISTANCE OF RIGID PLASTICS (IZOD IMPACT FLEXURAL TESTS)
- TS 1004-1971 PLASTICS DETERMINATlON OF THE CHARPY IMPACT RESISTANCE OF RIGID PLASTICS (CHARPY IMPACT FLEXURAL TEST)
The American Road & Transportation Builders Association, How to measure toughness
- AASHTO T 393-2021 Standard Method of Test for Determining the Fracture Potential of Asphalt Mixtures Using the Illinois Flexibility Index Test (I-FIT)
American Society of Mechanical Engineers (ASME), How to measure toughness
PK-PSQCA, How to measure toughness
- PS 595-1983 PAKISTAN STANDARD METHOD FOR DETERMINA-TION OF BREAKING LOAD, ELONGATION AT BREAK AND TENACITY OF JUTE YARNS. (1st Revision)