ZH
RU
ES

Test Standard Tolerance

Test Standard Tolerance, Total:311 items.

In the international standard classification, Test Standard Tolerance involves: Elements of buildings, Products of the textile industry, Textile fibres, Quality, Linear and angular measurements, Bottles. Pots. Jars, Iron and steel products, Road vehicle systems, Test conditions and procedures in general, Earthworks. Excavations. Foundation construction. Underground works, Optics and optical measurements, Rotating machinery, Products of non-ferrous metals, Construction industry, Screw threads, Cutting tools, Road engineering, Components for electrical equipment, Passenger cars. Caravans and light trailers, Horology, Technical drawings, Paints and varnishes, Industrial furnaces, Pipeline components and pipelines, Aerospace electric equipment and systems, Earth-moving machinery, Thermodynamics and temperature measurements, Medical equipment, Vocabularies, Testing of metals, Plastics, Characteristics and design of machines, apparatus, equipment, Materials for aerospace construction, Construction materials, Shafts and couplings, Components for aerospace construction, Rubber and plastics products.

CY-CYS, Test Standard Tolerance

CYS 149-1985 CYPRUS STANDARD CONCRETE TESTS - DIMENSIONS, TOLERANCES AND APPLICABILTTY OF TEST SPECMENS

American Society for Testing and Materials (ASTM), Test Standard Tolerance

ASTM E1486-98(2004) Standard Test Method for Determining Floor Tolerances Using Waviness, Wheel Path and Levelness Criteria
ASTM E1486-98(2010) Standard Test Method for Determining Floor Tolerances Using Waviness, Wheel Path and Levelness Criteria
ASTM E1486-14 Standard Test Method for Determining Floor Tolerances Using Waviness, Wheel Path and Levelness Criteria
ASTM E1486-98 Standard Test Method for Determining Floor Tolerances Using Waviness, Wheel Path and Levelness Criteria
ASTM E1486-14(2022) Standard Test Method for Determining Floor Tolerances Using Waviness, Wheel Path and Levelness Criteria
ASTM E1486M-14(2022) Standard Test Method for Determining Floor Tolerances Using Waviness, Wheel Path and Levelness Criteria (Metric)
ASTM E1486M-98(2010) Standard Test Method for Determining Floor Tolerances Using Waviness, Wheel Path and Levelness Criteria [Metric]
ASTM E1486M-14 Standard Test Method for Determining Floor Tolerances Using Waviness, Wheel Path and Levelness Criteria 40;Metric41;
ASTM E1486M-98 Standard Test Method for Determining Floor Tolerances Using Waviness, Wheel Path and Levelness Criteria [Metric]
ASTM E1486M-98(2004) Standard Test Method for Determining Floor Tolerances Using Waviness, Wheel Path and Levelness Criteria [Metric]
ASTM E2164-01(2007) Standard Test Method for Directional Difference Test
ASTM E2164-16 Standard Test Method for Directional Difference Test
ASTM D4543-85(1991)e1 Standard Practices for Preparing Rock Core Specimens and Determining Dimensional and Shape Tolerances
ASTM D4543-01 Standard Practices for Preparing Rock Core Specimens and Determining Dimensional and Shape Tolerances
ASTM D3887-96(2004) Standard Specification for Tolerances for Knitted Fabrics
ASTM D3887-96 Standard Specification for Tolerances for Knitted Fabrics
ASTM D3887-96(2008) Standard Specification for Tolerances for Knitted Fabrics
ASTM E2164-08 Standard Test Method for Directional Difference Test
ASTM D2244-23 Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
ASTM D2244-09a Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
ASTM D2244-93(2000) Standard Test Method for Calculation of Color Differences From Instrumentally Measured Color Coordinates
ASTM D2244-21 Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
ASTM D2244-22 Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
ASTM D2244-15e1 Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
ASTM D2244-07e1 Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
ASTM D2244-09 Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
ASTM D4356-84(1996) Standard Practice for Establishing Consistent Test Method Tolerances
ASTM D2644-02(2007) Standard Tolerances for Yarns Spun on the Woolen System
ASTM D2911-94 Standard Specification for Dimensions and Tolerances for Plastic Bottles
ASTM D2644-81(1996)e1 Standard Tolerances for Yarns Spun on the Woolen System
ASTM D2644-02 Standard Tolerances for Yarns Spun on the Woolen System
ASTM D2644-12 Standard Tolerances for Yarns Spun on the Woolen System
ASTM D2644-12(2018) Standard Tolerances for Yarns Spun on the Woolen System
ASTM D2911/D2911M-16(2023) Standard Specification for Dimensions and Tolerances for Plastic Bottles
ASTM F1053/F1053M-94 Standard Guide for Steel Hull Construction Tolerances [Metric] (Withdrawn 2003)
ASTM D2911-94(2005) Standard Specification for Dimensions and Tolerances for Plastic Bottles
ASTM D2911-94(2001) Standard Specification for Dimensions and Tolerances for Plastic Bottles
ASTM D2911/D2911M-16 Standard Specification for Dimensions and Tolerances for Plastic Bottles
ASTM D2911-10 Standard Specification for Dimensions and Tolerances for Plastic Bottles
ASTM D2244-02 Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
ASTM D2244-02e1 Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
ASTM D2244-05 Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
ASTM D2497-95 Standard Tolerances for Man-Made Organic-Base Filament Single Yarns
ASTM D2497-01 Standard Tolerances for Man-Made Organic-Base Filament Single Yarns
ASTM D2497-07 Standard Tolerances for Manufactured Organic-Base Filament Single Yarns
ASTM D2497-07(2012) Standard Tolerances for Manufactured Organic-Base Filament Single Yarns
ASTM D2497-07(2018) Standard Tolerances for Manufactured Organic-Base Filament Single Yarns
ASTM D249-89(1996) Standard tolerances for manufactured organic-based filament single yarns
ASTM D2645-07(2012) Standard Tolerances for Yarns Spun on the Cotton or Worsted Systems
ASTM D3134-15(2019) Standard Practice for Establishing Color and Gloss Tolerances
ASTM E2069-06(2018) Standard Test Method for Temperature Calibration on Cooling of Differential Scanning Calorimeters
ASTM E2069-19 Standard Test Method for Temperature Calibration on Cooling of Differential Scanning Calorimeters
ASTM D4543-04 Standard Practices for Preparing Rock Core Specimens and Determining Dimensional and Shape Tolerances
ASTM A1058-12a Standard Test Methods for Mechanical Testing of Steel Productsmdash;Metric
ASTM A1058-12b Standard Test Methods for Mechanical Testing of Steel Productsmdash;Metric
ASTM A1058-12 Standard Test Methods for Mechanical Testing of Steel Productsmdash;Metric
ASTM D6617-17 Standard Practice for Laboratory Bias Detection Using Single Test Result from Standard Material
ASTM D6617-21 Standard Practice for Laboratory Bias Detection Using Single Test Result from Standard Material
ASTM D7133-11 Standard Test Method for Polyurethane Raw Materials: Instrumental Measurement of Tristimulus CIELAB Color and Yellowness Index of Liquids
ASTM E2164-01 Standard Test Method for Directional Difference Test
ASTM F1181-19 Standard Test Method for Measuring Binocular Disparity in Transparent Parts
ASTM D2645-95(2001) Standard Tolerances for Yarns Spun on the Cotton or Worsted Systems
ASTM D2645-95 Standard Tolerances for Yarns Spun on the Cotton or Worsted Systems
ASTM D2645-07(2018) Standard Tolerances for Yarns Spun on the Cotton or Worsted Systems
ASTM E928-03 Standard Test Method for Determination of Purity by Differential Scanning Calorimetry
ASTM F801-96 Standard Test Method for Measuring Optical Angular Deviation of Transparent Parts
ASTM F801-96(2002) Standard Test Method for Measuring Optical Angular Deviation of Transparent Parts
ASTM E1311-89(1999) Standard Test Method for Minimum Detectable Temperature Difference for Thermal Imaging Systems
ASTM E1311-89(2010) Standard Test Method for Minimum Detectable Temperature Difference for Thermal Imaging Systems
ASTM E928-08(2014) Standard Test Method for Purity by Differential Scanning Calorimetry
ASTM F1181-09(2014) Standard Test Method for Measuring Binocular Disparity in Transparent Parts
ASTM F1181-09 Standard Test Method for Measuring Binocular Disparity in Transparent Parts
ASTM F801-16 Standard Test Method for Measuring Optical Angular Deviation of Transparent Parts
ASTM F801-21 Standard Test Method for Measuring Optical Angular Deviation of Transparent Parts
ASTM D6617-00 Standard Practice for Laboratory Bias Detection Using Single Test Result from Standard Material
ASTM D6617-05 Standard Practice for Laboratory Bias Detection Using Single Test Result from Standard Material
ASTM D6617-08 Standard Practice for Laboratory Bias Detection Using Single Test Result from Standard Material
ASTM D2645-07 Standard Tolerances for Yarns Spun on the Cotton or Worsted Systems
ASTM D3917-15a Standard Specification for Dimensional Tolerance of Thermosetting Glass-Reinforced Plastic Pultruded Shapes
ASTM D4695-03(2015) Standard Guide for General Pavement Deflection Measurements
ASTM D4695-03(2020) Standard Guide for General Pavement Deflection Measurements
ASTM F801-96(2008) Standard Test Method for Measuring Optical Angular Deviation of Transparent Parts
ASTM E1347-06 Standard Test Method for Color and Color-Difference Measurement by Tristimulus Colorimetry
ASTM E1347-06(2011) Standard Test Method for Color and Color-Difference Measurement by Tristimulus Colorimetry
ASTM E967-18 Standard Test Method for Temperature Calibration of Differential Scanning Calorimeters and Differential Thermal Analyzers

HU-MSZT, Test Standard Tolerance

Korean Agency for Technology and Standards (KATS), Test Standard Tolerance

KS K 0044-2011 Standard tolerances for yarn spun on the woolen system
KS K 0046-2012 Standard tolerances for yarns spun on the cotton or worsted systems
KS K 0042-2017 Standard tolerances for knit goods
KS K 0042-1975 Standard tolerances for knit goods
KS K 0046-1976 Standard tolerances for yarns spun on the cotton or worsted systems
KS K 0042-2011 Standard tolerances for knit goods
KS K 0042-2022 Standard specification for tolerances for knitted fabrics
KS K 0044-2022 Standard tolerances for yarn spun on the woolen system
KS K 0044-1986 Standard tolerances for yarn spun on the woolen system
KS K 0040-2019 Standard tolerances for manufactured organic-base man-made filament single yarns
KS K 0040-1975 Standard tolerances for manufactured organic-base man-made filament single yarns
KS A 3254-1969(2001) SIGNIFICANCE TEST OF DIFFERENCE BETWEEN THE POPULATION MEAN AND THE STANDARD (STANDARD DEVIATION UNKNOWN, ONE-SIDED)
KS A 3254-1987 SIGNIFICANCE TEST OF DIFFERENCE BETWEEN THE POPULATION MEAN AND THE STANDARD (STANDARD DEVIATION UNKNOWN, ONE-SIDED)
KS A 3255-1969(2001) SIGNIFICANCE TEST OF DIFFERENCE BETWEEN THE POPULATION MEAN AND THE STANDARD (STANDARD DEVIATION UNKNOWN, TWO-SIDED)
KS A 3255-1987 SIGNIFICANCE TEST OF DIFFERENCE BETWEEN THE POPULATION MEAN AND THE STANDARD (STANDARD DEVIATION UNKNOWN, TWO-SIDED)
KS K 0044-2016 Standard tolerances for yarn spun on the woolen system
KS K 0040-2011 Standard tolerances for manufactured organic-base man-made filament single yarns
KS K 0044-2016(2021) Standard tolerances for yarn spun on the woolen system
KS A 3252-1968(2001) SIGNIFICANCE TEST OF DIFFERENCE BETWEEN THE POPULATION MEAN AND THE STANDARD (STANDARD DEVIATION KNOWN, ONE-SIDED)
KS A 3253-1969(2001) SIGNIFICANCE TEST OF DIFFERENCE BETWEEN THE POPULATION MEAN AND THE STANDARD (STANDARD DEVIATION KNOWN, TWO-SIDED)
KS K 0043-2006 Test method and standard tolerances for wool and wool blend fabrics
KS K 0043-1986 Test method and standard tolerances for wool and wool blend fabrics
KS B 0213-1974 Limits and Tolerances for Unified Coarse Screw Threads
KS B 0216-1974 Limits and Tolerances for Unified Fine Screw Threads
KS K 0045-2007 Standard tolerances for tire cords made from man-made fibers
KS K 0045-1982 Standard tolerances for tire cords made from man-made fibers
KS A 3259-1969(2001) SIGNIFICANCE TEST OF DIFFERENCE BETWEEN THE POPULATION MEANS (STANDARD DEVIATIONS UNKNOWN, TWO-SIDED)
KS K 0046-2017 Standard tolerances for yarns spun on the cotton or worsted systems
KS A 3258-1991(2001) SIGNIFICANCE TEST OF DIFFERENCE BETWEEN THE TWO POPULATION MEANS(STANDARD DEVIATIONS UNKNOWN, ONE-SIDED)
KS B ISO 286-2:2009 ISO system of limits and fits-Part 2:Tables of standard tolerance grades and limit deviations for holes and shafts
KS B ISO 286-2:2014 ISO system of limits and fits-Part 2:Tables of standard tolerance grades and limit deviations for holes and shafts
KS B ISO 286-2:2015 Geometrical product specifications(GPS) — ISO code system fortolerances on linear sizes — Part 2: Tables of standard toleranceclasses and limit deviations for holes and shafts
KS K 0041-2006 Standard tolerances for cotton and cotton man－made fiber blend fabrics
KS A 3256-1969(2001) SIGNIFICANCE TEST OF DIFFERENCE BETWEEN THE POPULATION MEANS (STANDARD DEVIATIONS KNOWN, ONE-SIDED)
KS A 3257-1991(2001) SIGNIFICANCE TEST OF DIFFERENCE BETWEEN THE TWO POPULATION MEANS(STANDARD DEVIATIONS KNOWN, TWO-SIDED)
KS K 0040-2016 Standard tolerances for manufactured organic-base man-made filament single yarns
KS B ISO 286-2:2020 Geometrical product specifications(GPS) — ISO code system for tolerances on linear sizes — Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Test Standard Tolerance

GB 1800-1979 Tolerance and fitting,generalities,standard tolerances and basic deviations
GB/T 1800.4-1999 Limits and fits Tables of standard tolerance grades and limit deviations for holes and shafts
GB/T 19325-2003 Coated abrasive products--Dimensional tolerances on non-standard conversions
GB/T 1800.3-1998 Limits and fits--Bases--Part 3: Numerical values tables of standard toleranes and fundamental deviations

Professional Standard - Agriculture, Test Standard Tolerance

GB/T 1800-1979 General Tolerance and Fit Standard Tolerance and Basic Deviation

British Standards Institution (BSI), Test Standard Tolerance

BS ISO 17258:2015 Statistical methods. Six Sigma. Basic criteria underlying benchmarking for Six Sigma in organisations
BS EN 15904:2010 Glass packaging. Standard tolerances for flaconnage
BS ISO 9058:2008 Glass containers - Standard tolerances for bottles
BS ISO 12818:2013 Glass packaging. Standard tolerances for flaconnage
BS EN ISO 12818:2015 Glass packaging. Standard tolerances for flaconnage
BS EN 722-1:2004 Leisure accommodation vehicles-Liquid fuel heating systems-Part 1:Caravans and caravan holiday homes
BS EN ISO 286-2:1990 Geometrical product specifications (GPS). ISO code system for tolerances on linear sizes. Tables of standard tolerance classes and limit deviations for holes and shafts
BS 6911-7:1992 Testing earth-moving machinery. Testing of earth-moving machinery. Specification for units of measurement and tolerances
BS EN ISO 286-2:2010 Geometrical product specifications (GPS). ISO code system for tolerances on linear sizes. Tables of standard tolerance classes and limit deviations for holes and shafts
BS EN 62358:2004 Ferrite cores - Standard inductance factor (AL) and its tolerance
BS EN 3145:2002 Round bars, hot rolled in steel - Normal tolerances - Diameter 6 mm D 250 mm - Dimensions
BS 5686:1986 Specification for straight-sided splines for cylindrical shafts: metric nominal dimensions, tolerances and gauging requirements
BS 7007-3:1988 Abrasive products. Specification for dimensional tolerances on non-standard coated abrasive products

Japanese Industrial Standards Committee (JISC), Test Standard Tolerance

JIS B 0401-2:1998 ISO system of limits and fits -- Part 2: Tables of standard tolerance grades and limit deviations for holes and shafts
JIS B 0401-2:2016 Geometrical product specifications (GPS) -- ISO code system for tolerances on linear sizes -- Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts
JIS Z 9052:1963 Interval estimation of the difference between two population means (standard deviations known)
JIS Z 9053:1963 Interval estimation of the difference between two population means (standard deviations unknown)

BR-ABNT, Test Standard Tolerance

Association Francaise de Normalisation, Test Standard Tolerance

NF H35-213:2011 Glass packaging - Standard tolerances for flaconnage.
NF H35-213*NF EN ISO 12818:2015 Glass packaging - Standard tolerances for flaconnage
NF EN ISO 12818:2015 Emballages en verre - Tolérances standard pour flaconnage
NF E75-079:1987 COATED ABRASIVE PRODUCTS. DIMENSIONAL TOLERANCES ON NON-STANDARD CONVERSIONS.
NF P97-401:1977 Lighting columns. Dimensions and tolerances.
NF EN 4434:2006 Série aérospatiale - Conducteurs à tolérances réduites en cuivre ou alliage de cuivre pour câbles électriques - Norme de produit (tolérances normales et réduites)
NF C93-374:2004 Ferrite cores - Standard inductance factor (AL) and its tolerance.
NF A49-218:1979 Steel pipes. Seamless pipes for furnaces. Austenitic stainless steels. Dimensions (with normal or reduced tolerances). Technical delivery conditions.
NF EN ISO 286-2:2010 Spécification géométrique des produits (GPS) - Système de codification ISO pour les tolérances sur les tailles linéaires - Partie 2 : tableaux des classes de tolérance normalisés et des écarts limites des alésages et des arbres
NF L22-024:1967 List of standards for aircraft fasteners. ISO threads to ISO tolerances.

European Committee for Standardization (CEN), Test Standard Tolerance

EN 15904:2010 Glass packaging - Standard tolerances for flaconnage
EN ISO 12818:2015 Glass packaging - Standard tolerances for flaconnage

Society of Automotive Engineers (SAE), Test Standard Tolerance

SAE J1058-1999 Standard Sheet Steel Thickness and Tolerances
SAE MAM2204A-1994 TOLERANCES, METRIC Aluminum Alloy Standard Structural Shapes
SAE MAM2204-1983 TOLERANCES, METRIC Aluminum Alloy Standard Structural Shapes
SAE MAM2204B-1994 TOLERANCES, METRIC Aluminum Alloy Standard Structural Shapes
SAE AMS2204G-1994 TOLERANCES Aluminum Alloy Standard Structural Shapes
SAE AMS2204E-1983 TOLERANCES Aluminum Alloy Standard Structural Shapes
SAE AMS2204D-1973 TOLERANCES Aluminum Alloy Standard Structural Shapes
SAE AMS2204F-2011 TOLERANCES Aluminum Alloy Standard Structural Shapes
SAE AMS2204C-1966 TOLERANCES Aluminum Rolled or Extruded Standard Structural Shapes
SAE AMS2204A-1960 TOLERANCES Aluminum Rolled or Extruded Standard Structural Shapes
SAE AMS2204-1960 TOLERANCES Aluminum Rolled or Extruded Standard Structural Shapes
SAE TS86-3-2004 TS86 Procurement Test Requirements for Pin, Shear, Headed, Close Tolerance, Metric
SAE J1015-1991 Ton Kilometer per Hour Test Procedure, Standard;

PL-PKN, Test Standard Tolerance

PN M02155-1989 Round screw threads Tolerances for gauges
PN M02141-1986 Height and deph limit gauges Tolerances
PN M02158-1990 Trapezoidal multi - start screw threads Tolerances for gauges

SAE - SAE International, Test Standard Tolerance

SAE J1058-1991 Sheet Steel Thickness and Profile@ Recommended Practice
SAE J1058-1976 Sheet Steel Thickness and Profile
SAE J1058-2015 Sheet Steel Thickness and Profile
SAE MAM2204B-1989 Tolerances@ Metric Aluminum Alloy Standard Structural Shapes
SAE MAM2204C-1996 Tolerances@ Metric Aluminum Alloy Standard Structural Shapes
SAE AMS2204H-1996 Tolerances Aluminum Alloy Standard Structural Shapes
SAE AMS2204G-1989 Tolerances Aluminum Alloy Standard Structural Shapes
SAE AMS2204B-1964 TOLERANCES Aluminum Rolled or Extruded Standard Structural Shapes

RO-ASRO, Test Standard Tolerance

STAS 6725-1968

CU-NC, Test Standard Tolerance

NC 16-13-1984 Basic Interchangeability Standards. Bevel and Hypoíd Gear Transmissions. Tolerances
NC 16-46-1981 Interchangeability Basic Standards. Metric Thread. Clearance Fit. Tolerances
NC 16-14-1984 Interchangeability Basic Standards. Cylindrical Bndless Transmisslons. Tolerances
NC 16-17-1981 Interchangeabi lity Basic Standars. Surface Form and Position Toleranees. Terms and Basic Definitions
NC 16-57-1988 Basic Interchangeability Standards. Inclined Keys. Dimensions, Adjustments and Tolerances
NC 16-59-1988 Basic Interchangeability Standards. Segmented Keys. Dimensions, Adjustments and Tolerances
NC 16-58-1988 Basic Interchangeability Standards. Tangential Keys. Dimensions, Adjustments and Tolerances
NC 16-77-1984 Interchangeability Basic Standards. Positional Tolerancos of Hole Gaometrical Shafts for Fixing Elements

International Organization for Standardization (ISO), Test Standard Tolerance

ISO 9058:2008 Glass containers - Standard tolerances for bottles
ISO 12818:2013 Glass packaging - Standard tolerances for flaconnage
ISO 3443-3:1987 Tolerances for building; Part 3 : Procedures for selecting target size and predicting fit

SE-SIS, Test Standard Tolerance

SIS SMS 1357-1950
SIS SMS 1486-1950
SIS SS 2090-1990 ISO system of limits and fits — Standard tolerances
SIS SMS 1338-1950
SIS SMS 1488-1950
SIS SS 13 11 11-1983 Concrete testing - Test specimens - Shape, dimensions and tolerances
SIS SMS 1344-1950
SIS SMS 1487-1950
SIS SMS 1941-1972 Tolerances for hexagon socket head cap screws Unified screw threads
SIS SMS 1346-1950
SIS SMS 1341-1950
SIS SMS 1356-1950
SIS SMS 1345-1950
SIS SMS 1337-1950
SIS SMS 1489-1950
SIS SMS 1340-1950
SIS SMS 1343-1950
SIS SMS 1339-1950
SIS SMS 1342-1950
SIS SMS 1491-1950
SIS SMS 1347-1950
SIS SMS 1492-1950
SIS SMS 1493-1950

Professional Standard - Machinery, Test Standard Tolerance

JB/T 8995.1-1999 Tolerances and fits for large-size of large electrical machines and hydraulic turbines.General standard tolerances and fundamental deviations
JB/T 10590-2006 Coated abrasive products-Dimensional tolerances on non-standard conversions
JB/T 10744-2007 Coated abrasive products.Dimensional tolerances on non-standard conversions

Professional Standard - Light Industry, Test Standard Tolerance

QB/T 2267-1996 Tolerance and fit dimensions for timing instruments to 18mm insert standard tolerance values for intermediate tolerance classes
QB/T 2267-2015 Limits and fits for timekeeping instruments.Standard tolerance value of inserted middle tolerance grade for nominal size up to 18 mm

国家市场监督管理总局、中国国家标准化管理委员会, Test Standard Tolerance

GB/T 37851-2019 Glass containers—Standard tolerances for flaconnage
GB/T 1800.2-2020 Geometrical product specifications (GPS)—ISO code system for tolerances on linear sizes—Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts

Danish Standards Foundation, Test Standard Tolerance

DS/EN 15904:2011 Glass packaging - Standard tolerances for flaconnage
DS/ISO 9058:2008 Glass containers - Standard tolerances for bottles
DS/EN 4434:2006 Aerospace series - Copper or copper alloy lightweight conductors for electrical cables - Product standard (Normal and tight tolerances)
DS/EN ISO 286-2:2010 Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts
DS/EN ISO 286-2/AC:2013 Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts
DS/EN 20286-2:1993 ISO system of limits and fits. Part 2: Tables of standard tolerance grades and limit deviations for holes and shafts
DS 2370-3:1996 Measuring equipment - Limit gauges - Part 3: Plug gauges and spherical plug gauges for ISO-tolerances for 1-500 mm nominal size - Manufacturing tolerances and allowed deviations

Lithuanian Standards Office , Test Standard Tolerance

LST EN 15904-2011 Glass packaging - Standard tolerances for flaconnage
LST EN ISO 12818:2015 Glass packaging - Standard tolerances for flaconnage (ISO 12818:2013)
LST EN 4434-2006 Aerospace series - Copper or copper alloy lightweight conductors for electrical cables - Product standard (Normal and tight tolerances)
LST EN 62358-2004 Ferrite cores. Standard inductance factor (AL) and its tolerance (IEC 62358:2004)
LST EN ISO 286-2:2010 Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts (ISO 286-2:2010)

American National Standards Institute （ANSI), Test Standard Tolerance

ANSI H35.2-2013 Standard Dimensional Tolerances for Aluminum Mill Products
ANSI H35.2M-2013 Standard Dimensional Tolerances for Aluminum Mill Products
ANSI Z80.20-2004 Ophthalmics: Contact Lenses - Standard Terminology, Tolerances, Measurements and Physicochemical Properties
ANSI Z80.20-2010 Contact Lenses - Standard Terminology, Tolerances Measurements and Physiochemical Properties
BS ISO 8062-4:2023 Tracked Changes. Geometrical product specifications (GPS). Dimensional and geometrical tolerances for moulded parts Rules and general tolerances for castings using profile tolerancing in a general datum system (British Standard)
ANSI/ASTM D6617:2021 Standard Practice for Laboratory Bias Detection Using Single Test Result from Standard Material

German Institute for Standardization, Test Standard Tolerance

DIN EN ISO 12818:2015-08 Glass packaging - Standard tolerances for flaconnage (ISO 12818:2013); German version EN ISO 12818:2015
DIN 7172:1991-04 Tolerances and limit deviations for sizes above 3150 mm up to 10000 mm; principles, standard tolerances and limit deviations
DIN 7172:1991 Tolerances and limit deviations for sizes above 3150 mm up to 10000 mm; principles, standard tolerances and limit deviations
DIN ISO 286-2:1990 ISO system of limits and fits; tables of standard tolerance grades and limit deviations for holes and shafts; identical with ISO 286-2:1988
DIN EN 15904:2011 Glass packaging - Standard tolerances for flaconnage; German version EN 15904:2010
DIN EN ISO 286-2:2019-09 Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts (ISO 286-2:2010 + Cor 1:2013); German version EN ISO 286-2:2010 + AC:2013
DIN EN ISO 1127:1997 Stainless steel tubes - Dimensions, tolerances and conventional masses per unit length (ISO 1127:1992); German version EN ISO 1127:1996

RU-GOST R, Test Standard Tolerance

GOST R ISO 9058-2010 Glass containers. Bottles. Standard tolerances of nominal dimensions
GOST ISO 9058-2013 Glass containers. Bottles. Standard tolerances from nominal dimensions
GOST 34038-2016 Glass packaging. Flacons. Standard tolerances from nominal dimensions
GOST 8908-1981 Basic norms of interchangeability. Standart angles and angle telerances

Professional Standard - Military and Civilian Products, Test Standard Tolerance

WJ 1266-1981 Dimensional tolerance of plastic parts (limited standard)

FI-SFS, Test Standard Tolerance

TH-TISI, Test Standard Tolerance

TIS 377-1981 Standard for tolerances for bolts, screws, nuts and studs
TIS 210.8-1986 Standard for mechanical drawings.part 8: geometrical tolerancing: datums and datum.systems

United States Navy, Test Standard Tolerance

NAVY DOD-R-23679 F-1986 REAGENTS, STANDARD, WATER TEST CHEMICALS (METRIC)

KR-KS, Test Standard Tolerance

KS K 0046-2017(2022) Standard tolerances for yarns spun on the cotton or worsted systems
KS B ISO 286-2-2020 Geometrical product specifications(GPS) — ISO code system for tolerances on linear sizes — Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts

CZ-CSN, Test Standard Tolerance

CSN 01 4203 Za-1990
CSN 33 0128-1984 Standard frequencies in tho range of 0,1 to 10000 Hz and their tolerances .
CSN 34 0033-1966 Standard frequencies in the range of 0,1 to 10 000 Hz and their tolerances
CSN ISO 1920:1994 Concrete tests-Dimensions,tolerances and applicability of test specimens
CSN 42 6710-1978 Cold-drawn seamless tubes with normal tolerances of steel grade 11-16. Dimensions

ANSI - American National Standards Institute, Test Standard Tolerance

Z80.20-2004 Ophthalmics – Contact Lenses – Standard Terminology@ Tolerances@ Measurements and Physicochemical Properties (VC)
Z80.20-2016 For Ophthalmics Contact Lenses – Standard Terminology@ Tolerances@ Measurements and Physicochemical Properties (VC)
Z80.20-2010 For Ophthalmics Contact Lenses – Standard Terminology@ Tolerances@ Measurements and Physicochemical Properties (VC)
Z80.20-1998 Ophthalmics-Contact Lenses-Standard Terminology@ Tolerances@ Measurements and Physicochemical Properties (VC)

ACI - American Concrete Institute, Test Standard Tolerance

ACI 117-1990 Standard Specification for Tolerances for Concrete Construction and Materials
ACI 117/117R-1990 Standard Specification for Tolerances for Concrete Construction and Materials
ACI 117R-1990 Commentary on Standard Specifications for Tolerances for Concrete Construction and Materials

The Aluminum Association, Test Standard Tolerance

AA H35.2-2013 American National Standard Dimensional Tolerances for Aluminum Mill Products

ISUZU - Isuzu Motors Ltd., Test Standard Tolerance

ISC-A140-2001 Standard Dimensions and Tolerance of Steel Materials; Best Copy Available
ISC-A140-1992 Standard Dimensions and Tolerances of Steel Materials (Japanese/English Version)

International Electrotechnical Commission (IEC), Test Standard Tolerance

IEC 62358:2012 Ferrite cores - Standard inductance factor for gapped cores and its tolerance
IEC 62358:2004 Ferrite cores - Standard inductance factor (A<(Index)L>) and its tolerance

AENOR, Test Standard Tolerance

UNE-EN ISO 12818:2015 Glass packaging - Standard tolerances for flaconnage (ISO 12818:2013)
UNE-EN ISO 286-2:2011 Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts (ISO 286-2:2010)

Aerospace Industries Association, Test Standard Tolerance

AIA NAS 335-2000 Screw, Shear, 100 Degree Standard Flush Head, Close Tolerance, 95 KSI Fsu ,Close Tolerance, 95 KSI Fsu FSC 5305; REV 14

Taiwan Provincial Standard of the People's Republic of China, Test Standard Tolerance

CNS 3-14-1994 Engineering Drawing (Geometrical Tolerancing - Datums and Datum - Systems)
CNS 3.14-1994 Engineering Drawing (Geometrical Tolerancing - Datums and Datum - Systems)

Professional Standard - Aviation, Test Standard Tolerance

HB 5647-1981 Labeling, tolerance and smoothness of blade profile (Trial)

Acoustical Society of America (ASA), Test Standard Tolerance

ASA B4a-1925 TOLERANCES,ALLOWANCES AND GAGES FOR METAL FITS

CENELEC - European Committee for Electrotechnical Standardization, Test Standard Tolerance

EN 62358:2004 Ferrite cores Standard inductance factor (AL) and its tolerance

Standard Association of Australia （SAA）, Test Standard Tolerance

AS 1654.2:1995 ISO system of limits and fits - Tables of standard tolerance grades and limit deviations for holes and shafts
AS 1257:1973/Amdt 1:1979

VN-TCVN, Test Standard Tolerance

TCVN 2245-1999 ISO system of limits and fits.Tables of standard tolerance grades and limit deviations for holes and shafts

AT-ON, Test Standard Tolerance

ONORM ISO 286 Teil.2:1990 ISO System oflimits andfits; tables of Standard tolerance grades and limit deviations for holes and shafts

KE-KEBS, Test Standard Tolerance

KS 06-49-1977 KENYA STANDARD ON TOLERANCED DIMENSIONS - CONVERSION FROM INCHES INTO MILLIMETRES AND VICE VERSA

Aerospace Industries Association/ANSI Aerospace Standards, Test Standard Tolerance

AIA/NAS NAS333-340-2012 SCREW, SHEAR, 100?STANDARD FLUSH HEAD, CLOSE TOLERANCE, 95 KSI Fsu Rev 15
AIA/NAS NAS333-340-2013 SCREW, SHEAR, 100?STANDARD FLUSH HEAD, CLOSE TOLERANCE, 95 KSI Fsu Rev.16

未注明发布机构, Test Standard Tolerance

BS EN ISO 286-2:2010(2013) Geometrical product specifications (GPS) — ISO code system for tolerances on linear sizes Part 2 : Tables of standard tolerance classes and limit deviations for holes and shafts

European Association of Aerospace Industries, Test Standard Tolerance

AECMA PREN 3145-1995 Aerospace Series Round Bars with Normal Tolerances Hot Formed, in Steel Diameter 6 mm Less Than or Equal to D Less Than or Equal to 250 mm Dimensions Edition P 1

ZA-SANS, Test Standard Tolerance

SANS 5860:2006 Concrete tests - Dimensions, tolerances and uses of cast test specimens

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, Test Standard Tolerance

PREN 4434-2003 Aerospace Series Copper or Copper Alloy Lightweight Conductors for Electrical Cables Product Standard (Normal and tight tolerances) (Edition P 2)

U.S. Military Regulations and Norms, Test Standard Tolerance

ARMY MIL-HDBK-682 VALID NOTICE 1-2004 TOLERANCING, DIMENSIONING, AND GAGING TECHNIQUES FOR THE DESIGN OF INSPECTION EQUIPMENT
ARMY MIL-HDBK-682-1991 TOLERANCING, DIMENSIONING, AND GAGING TECHNIQUES FOR THE DESIGN OF INSPECTION EQUIPMENT

Indonesia Standards, Test Standard Tolerance

SNI 19-2308-1991 Statistical interpretation of data - Determination of a statistical tolerance interval

NZ-SNZ, Test Standard Tolerance

AS/NZS 4533:1998 Coated Abrasive Products - Dimensional Tolerances on Non-Standard Conversions (ISO 8366: 1987)

NL-NEN, Test Standard Tolerance

NEN-ISO 286-2:1989 ISO-passingstelsel. Deel 2: Tabellen met standaardtolerantiekwaliteiten en grensmaatafwijkingen voor gaten en assen