ZH
RU
ES
compressed natural gas density
compressed natural gas density, Total:496 items.
In the international standard classification, compressed natural gas density involves: Natural gas, Equipment for petroleum and natural gas industries, Fluid storage devices, Commercial vehicles, Road vehicles in general, Diagnostic, maintenance and test equipment, Petroleum, petroleum products and natural gas handling equipment, Internal combustion engines for road vehicles, Rotating machinery, Shipbuilding and marine structures in general, Compressors and pneumatic machines, Wind turbine systems and other alternative sources of energy, Road vehicle systems, Services, Transport, Fuels, Installations in buildings, Construction technology, Analytical chemistry, Equipment for the chemical industry, Iron and steel products, Construction materials.
European Committee for Standardization (CEN), compressed natural gas density
- EN ISO 15970:2014 Natural gas - Measurement of properties - Volumetric properties: density@ pressure@ temperature and compression factor
- EN 13423:2000 Compresses natural gas vehicle operations
- EN 13423:2021 Natural gas vehicles - Requirements for NGV workshops and the management of compressed natural gas (CNG) vehicles
- EN ISO 15403-1:2008 Natural gas - Natural gas for use as a compressed fuel for vehicles - Part 1: Designation of the quality (ISO 15403-1:2006)
- EN ISO 14469:2017 Road vehicles - Compressed natural gas (CNG) refuelling connector
- EN 12583:2014 Gas Infrastructure - Compressor stations - Functional requirements
- prEN 12583-2021 Gas Infrastructure - Compressor stations - Functional requirements
- EN ISO 6976:2016 Natural gas - Calculation of calorific values@ density@ relative density and Wobbe indices from composition
- EN ISO 12213-1:2009 Natural gas - Calculation of compression factor - Part 1: Introduction and guidelines (ISO 12213-1:2006)
- EN ISO 6368:2021 Petroleum, petrochemical and natural gas industries - Dry gas sealing systems for axial, centrifugal, and rotary screw compressors and expanders (ISO 6368:2021)
- EN ISO 10439:2002 Petroleum, chemical and gas service industries - Centrifugal compressors ISO 10439: 2002
- EN ISO 10440-1:2000 Petroleum and Natural Gas Industries - Rotary-Type Positive-Displacement Compressors - Part 1: Process Compressors (Oil-Free) ISO 10440-1:2000
- EN ISO 10440-1:2007 Petroleum, petrochemical and natural gas industries - Rotarytype positive-displacement compressors - Part 1: Process compressors
- EN ISO 12213-2:2005 Natural gas ?Calculation of compression factor ?Part 2: Calculation using molar-composition analysis
- EN ISO 12213-3:2009 Natural gas - Calculation of compression factor - Part 3: Calculation using physical properties (ISO 12213-3:2006)
International Organization for Standardization (ISO), compressed natural gas density
- ISO 15970:2008 Natural gas - Measurement of properties - Volumetric properties: density, pressure, temperature and compression factor
- ISO 15403:2000 Natural gas - Designation of the quality of natural gas for use as a compressed fuel for vehicles
- ISO 15403-1:2006 Natural gas - Natural gas for use as a compressed fuel for vehicles - Part 1: Designation of the quality
- ISO 13707:2000 Petroleum and natural gas industries - Reciprocating compressors
- ISO 14469:2017 Road vehicles - Compressed natural gas (CNG) refuelling connector
- ISO/TR 15403-2:2006 Natural gas - Natural gas for use as a compressed fuel for vehicles - Part 2: Specification of the quality
- ISO 15500-11:2001 Road vehicles - Compressed natural gas (CNG) fuel system components - Part 11: Gas/air mixer
- ISO 15500-11:2015 Road vehicles - Compressed natural gas (CNG) fuel system components - Part 11: Gas/air mixer
- ISO 13631:2002 Petroleum and natural gas industries - Packaged reciprocating gas compressors
- ISO 15500-23:2023 Road vehicles — Compressed natural gas (CNG) fuel system components — Part 23: Gas temperature sensor
- ISO/CD 2615 Analysis of natural gas — Biomethane — Determination of the content of compressor oil
- ISO/DIS 2615:2023 Analysis of natural gas —Biomethane — Determination of the content of compressor oil
- ISO 10440-2:2001 Petroleum and natural gas industries - Rotary-type positive-displacement compressors - Part 2: Packaged air compressors (oil-free)
- ISO 12213-1:2006 Natural gas - Calculation of compression factor - Part 1: Introduction and guidelines
- ISO 12619-12:2017 Road vehicles — Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blends fuel system components — Part 12: Gas-tight housing and ventilation hoses
- ISO 6368:2021 Petroleum, petrochemical and natural gas industries — Dry gas sealing systems for axial, centrifugal, and rotary screw compressors and expanders
- ISO 10440-1:2007 Petroleum, petrochemical and natural gas industries - Rotary-type positive-displacement compressors - Part 1: Process compressors
- ISO 10440-1:2000 Petroleum and natural gas industries - Rotary-type positive-displacement compressors - Part 1: Process compressors (oil-free)
- ISO 15500-12:2015 Road vehicles - Compressed natural gas (CNG) fuel system components - Part 12: Pressure relief valve (PRV)
- ISO 15500-9:2001 Road vehicles - Compressed natural gas (CNG) fuel system components - Part 9: Pressure regulator
- ISO 15500-12:2001 Road vehicles - Compressed natural gas (CNG) fuel system components - Part 12: Pressure relief valve (PRV)
- ISO 15500-9:2012 Road vehicles - Compressed natural gas (CNG) fuel system components - Part 9: Pressure regulator
- ISO 15500-13:2001 Road vehicles - Compressed natural gas (CNG) fuel system components - Part 13: Pressure relief device (PRD)
- ISO 15500-13:2023 Road vehicles — Compressed natural gas (CNG) fuel system components — Part 13: Pressure relief device (PRD)
- ISO 15500-13:2012 Road vehicles - Compressed natural gas (CNG) fuel system components - Part 13: Pressure relief device (PRD)
- ISO 15501-1:2012 Road vehicles - Compressed natural gas (CNG) fuel systems - Part 1: Safety requirements
- ISO 12213-3:2006 Natural gas - Calculation of compression factor - Part 3: Calculation using physical properties
- ISO 15501-1:2001 Road vehicles - Compressed natural gas (CNG) fuel systems - Part 1: Safety requirements
- ISO 10439-4:2015 "Petroleum, petrochemical and natural gas industries - Axial and centrifugal compressors and expander-compressors - Part 4: Expander-compressors"
- ISO 15500-8:2001 Road vehicles - Compressed natural gas (CNG) fuel system components - Part 8: Pressure indicator
- ISO 15500-8:2015 Road vehicles - Compressed natural gas (CNG) fuel system components - Part 8: Pressure indicator
- ISO 15500-9:2020 Road vehicles — Compressed natural gas (CNG) fuel system components — Part 9: Pressure regulator
- ISO 6976:1995/Cor 1:1997 Natural gas - Calculation of calorific values, density, relative density and Wobbe index from composition; Technical Corrigendum 1
- ISO 6976:1995/Cor 3:1999 Natural gas - Calculation of calorific values, density, relative density and Wobbe index from composition; Technical Corrigendum 3
- ISO 15500-5:2001 Road vehicles - Compressed natural gas (CNG) fuel system components - Part 5: Manual cylinder valve
- ISO 15500-10:2001 Road vehicles - Compressed natural gas (CNG) fuel system components - Part 10: Gas-flow adjuster
- ISO 15500-10:2015 Road vehicles - Compressed natural gas (CNG) fuel system components - Part 10: Gas-flow adjuster
- ISO 15500-5:2020 Road vehicles - Compressed natural gas (CNG) fuel system components - Part 5: Manual cylinder valve
- ISO 15500-5:2012 Road vehicles - Compressed natural gas (CNG) fuel system components - Part 5: Manual cylinder valve
- ISO 15501-2:2016 Road vehicles - Compressed natural gas (CNG) fuel systems - Part 2: Test methods
- ISO 15500-4:2001 Road vehicles - Compressed natural gas (CNG) fuel system components - Part 4: Manual valve
- ISO 15500-19:2001 Road vehicles - Compressed natural gas (CNG) fuel system components - Part 19: Fittings
- ISO 15501-2:2001 Road vehicles - Compressed natural gas (CNG) fuel systems - Part 2: Test methods
- ISO 15501-1:2016/Amd 1:2021 Road vehicles — Compressed natural gas (CNG) fuel systems — Part 1: Safety requirements
- ISO 15500-4:2020 Road vehicles - Compressed natural gas (CNG) fuel system components - Part 4: Manual valve
- ISO 15501-1:2016 Road vehicles - Compressed natural gas (CNG) fuel systems - Part 1: Safety requirements
- ISO 15500-19:2020 Road vehicles — Compressed natural gas (CNG) fuel system components — Part 19: Fittings
- ISO 15500-19:2012 Road vehicles - Compressed natural gas (CNG) fuel system components - Part 19: Fittings
- ISO 15500-4:2012 Road vehicles - Compressed natural gas (CNG) fuel system components - Part 4: Manual valve
British Standards Institution (BSI), compressed natural gas density
- BS ISO 15970:2008 Natural gas - Measurement of properties - Volumetric properties: density, pressure, temperature and compression factor
- BS EN ISO 15970:2014 Natural gas. Measurement of properties. Volumetric properties: density, pressure, temperature and compression factor
- BS EN 13423:2000 Compressed natural gas vehicle operations
- BS EN 13423:2021 Natural gas vehicles. Requirements for NGV workshops and the management of compressed natural gas (CNG) vehicles
- BS EN ISO 15403-1:2008 Natural gas - Natural gas for use as a compressed fuel for vehicles - Designation of the quality
- BS ISO 15500-15:2015 Road vehicles. Compressed natural gas (CNG) fuel system components. Gas-tight housing and ventilation hose
- BS ISO 15500-23:2023 Road vehicles. Compressed natural gas (CNG) fuel system components - Gas temperature sensor
- 19/30398769 DC BS EN 13423. Natural gas vehicles. Requirements for NGV workshops and the management of compressed natural gas (CNG) vehicles
- BS EN ISO 12213-1:2009 Natural gas - Calculation of compression factor - Introduction and guidelines
- BS EN ISO 14469:2017 Road vehicles. Compressed natural gas (CNG) refuelling connector
- BS EN ISO 10440-2:2001 Petroleum and natural gas industries. Rotary-type positive-displacement compressors - Packaged air compressors (oil-free)
- BS EN ISO 13631:2002 Petroleum and natural gas industries. Packaged reciprocating gas compressors
- BS EN ISO 12213-3:2009 Natural gas - Calculation of compression factor - Calculation using physical properties
- BS EN ISO 10440-2:2002 Petroleum and natural gas industries. Rotary-type positive-displacement compressors. Packaged air compressors (oil-free)
- BS EN ISO 10440-1:2008 Petroleum, petrochemical and natural gas industries. Rotary-type positive-displacement compressors. Process compressors
- BS EN ISO 10440-1:2007 Petroleum, petrochemical and natural gas industries. Rotary-type positive-displacement compressors - Process compressors
- BS ISO 12619-12:2017 Road vehicles. Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blends fuel system components. Gas-tight housing and ventilation hoses
- BS ISO 15500-13:2012 Road vehicles. Compressed natural gas (CNG) fuel system components. Pressure relief device (PRD)
- BS ISO 15500-12:2015 Road vehicles. Compressed natural gas (CNG) fuel system components. Pressure relief valve (PRV)
- BS ISO 15500-19:2012 Road vehicles. Compressed natural gas (CNG) fuel system components. Fittings
- BS ISO 15501-2:2016 Road vehicles. Compressed natural gas (CNG) fuel systems. Test methods
- BS ISO 15501-1:2016+A1:2021 Road vehicles. Compressed natural gas (CNG) fuel systems - Safety requirements
- BS ISO 15500-19:2020 Road vehicles. Compressed natural gas (CNG) fuel system components - Fittings
- 21/30424927 DC BS EN 12583. Gas Infrastructure. Compressor stations. Functional requirements
- BS ISO 15500-9:2012 Road vehicles. Compressed natural gas (CNG) fuel system components. Pressure regulator
- BS ISO 15500-9:2020 Road vehicles. Compressed natural gas (CNG) fuel system components - Pressure regulator
- BS ISO 15500-8:2015 Road vehicles. Compressed natural gas (CNG) fuel system components. Pressure indicator
- BS ISO 15500-5:2012 Road vehicles. Compressed natural gas (CNG) fuel system components. Manual cylinder valve
- BS ISO 15500-7:2015 Road vehicles. Compressed natural gas (CNG) fuel system components. Gas injector
- BS ISO 15500-5:2020 Road vehicles. Compressed natural gas (CNG) fuel system components. Manual cylinder valve
- BS ISO 15500-11:2015 Road vehicles. Compressed natural gas (CNG) fuel system components. Gas/air mixer
- BS ISO 15501-1:2016 Road vehicles. Compressed natural gas (CNG) fuel systems. Safety requirements
- BS ISO 15501-1:2013 Road vehicles. Compressed natural gas (CNG) fuel systems. Safety requirements
- BS ISO 15500-18:2012 Road vehicles. Compressed natural gas (CNG) fuel system components. Filter
- BS ISO 15500-14:2012 Road vehicles. Compressed natural gas (CNG) fuel system components. Excess flow valve
- BS ISO 15500-4:2012 Road vehicles. Compressed natural gas (CNG) fuel system components. Manual valve
- BS ISO 15500-3:2012 Road vehicles. Compressed natural gas (CNG) fuel system components. Check valve
- BS EN ISO 12213-2:2009 Natural gas - Calculation of compression factor - Calculation using molar-composition analysis
- BS ISO 15500-14:2020 Road vehicles. Compressed natural gas (CNG) fuel system components - Excess flow valve
- BS ISO 15500-3:2020 Road vehicles. Compressed natural gas (CNG) fuel system components - Check valve
- BS ISO 15500-18:2020 Road vehicles. Compressed natural gas (CNG) fuel system components - Filter
- BS ISO 15500-6:2020 Road vehicles. Compressed natural gas (CNG) fuel system components - Automatic valve
- BS EN 12583:2022 Tracked Changes. Gas Infrastructure. Compressor stations. Functional requirements
- BS ISO 15500-4:2020 Road vehicles. Compressed natural gas (CNG) fuel system components. Manual valve
- BS ISO 12619-9:2017 Road vehicles. Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blends fuel system components. Pressure relief valve (PRV)
- BS ISO 12213-3:1998 Natural gas - Calculation of compression factors - Calculation using measured physical properties
- BS ISO 15500-17:2012 Road vehicles. Compressed natural gas (CNG) fuel system components. Flexible fuel line
- BS ISO 15500-6:2012 Road vehicles. Compressed natural gas (CNG) fuel system components. Automatic valve
- BS ISO 15500-10:2015 Road vehicles. Compressed natural gas (CNG) fuel system components. Gas-flow adjuster
- BS EN ISO 6976:2016 Tracked Changes. Natural gas. Calculation of calorific values, density, relative density and Wobbe indices from composition
- BS ISO 12619-8:2017 Road vehicles. Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blends fuel system components. Pressure indicator
- BS ISO 12619-10:2017 Road vehicles. Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blends fuel system components. Pressure relief device (PRD)
- 22/30424815 DC BS ISO 15500-23. Road vehicles. Compressed natural gas (CNG) fuel system components - Part 23. Gas temperature sensor
- BS ISO 12619-3:2014+A1:2016 Road vehicles. Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blend fuel system components. Pressure regulator
- BS ISO 12619-15:2017 Road vehicles. Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blends fuel system components. Filter
- BS ISO 12619-16:2017 Road vehicles. Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blends fuel system components. Fittings
- BS ISO 21266-2:2018 Road vehicles. Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blends fuel systems - Test methods
- BS ISO 21266-1:2018 Road vehicles. Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blends fuel systems - Safety requirements
- BS ISO 12619-3:2014 Road vehicles. Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blend fuel system components. Pressure regulator
- BS ISO 12619-11:2017 Road vehicles. Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blends fuel system components. Excess flow valve
- BS ISO 12619-6:2017 Road vehicles. Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blend fuel system components. Automatic valve
- BS ISO 15500-13:2023 Tracked Changes. Road vehicles. Compressed natural gas (CNG) fuel system components. Pressure relief device (PRD)
- BS ISO 14469-3:2006 Road vehicles - Compressed natural gas (CNG) refuelling connector - 25 MPa (250 bar) connector
Korean Agency for Technology and Standards (KATS), compressed natural gas density
- KS I ISO 15970:2010 Natural gas-Measurement of properties-Volumetric properties: density, pressure, temperature and compression factor
- KS I ISO 15970-2010(2021) Natural gas－Measurement of properties－Volumetric properties: density, pressure, temperature and compression factor
- KS I ISO 15970-2010(2016) Natural gas－Measurement of properties－Volumetric properties: density, pressure, temperature and compression factor
- KS I ISO 15403:2008 Natural gas－Designation of the quality of natural gas for use as a compressed fuel for vehicles
- KS I ISO 15403-2-2010(2016) Natural gas－Natural gas for use as a compressed fuel for vehicles－Part 2：Specification of the quality
- KS I ISO 15403-1-2010(2016) Natural gas－Natural gas for use as a compressed fuel for vehicles－Part 1：Designation of the quality
- KS I ISO 15403-1:2010 Natural gas-Natural gas for use as a compressed fuel for vehicles-Part 1:Designation of the quality
- KS I ISO 15403-2-2010(2021) Natural gas－Natural gas for use as a compressed fuel for vehicles－Part 2：Specification of the quality
- KS I ISO 15403-1-2010(2021) Natural gas－Natural gas for use as a compressed fuel for vehicles－Part 1：Designation of the quality
- KS I ISO 15403-2:2010 Natural gas-Natural gas for use as a compressed fuel for vehicles-Part 2:Specification of the quality
- KS I ISO 6976:2017 Natural gas — Calculation of calorific values, density, relative density and Wobbe indices from composition
- KS R ISO 15500-15:2007 Road vehicles－Compressed natural gas(CNG) fuel system components－Part 15：Gas-tight housing and ventilation hose
- KS I ISO 6976-2017(2022) Natural gas — Calculation of calorific values, density, relative density and Wobbe indices from composition
- KS R ISO 15500-15:2018 Road vehicles — Compressed natural gas(CNG) fuel system components — Part 15: Gas tight housing and ventilation hose
- KS I ISO 6976:2007 Natural gas－Calculation of calorific values, density, relative density and Wobbe index from composition
- KS I ISO 12213-1:2010 Natural gas－Calculation of compression factor－Part 1：Introduction and guidelines
- KS I ISO 12213-1-2010(2016) Natural gas－Calculation of compression factor－Part 1：Introduction and guidelines
- KS I ISO 12213-1-2010(2021) Natural gas－Calculation of compression factor－Part 1：Introduction and guidelines
- KS I ISO 12213-3-2010(2021) Natural gas－Calculation of compression factor－Part 3：Calculation using physical properties
- KS R ISO 15500-14:2004 Road vehicles-Compressed natural gas(CNG) fuel system components-Part 14:Excess flow valve
- KS R ISO 15500-12:2018 Road vehicles — Compressed natural gas(CNG) fuel system components — Part 12: Pressure relief valve(PRV)
- KS R ISO 15500-14:2014 Road vehicles — Compressed natural gas(CNG) fuel system components — Part 14: Excess flow valve
- KS I ISO 12213-3:2010 Natural gas－Calculation of compression factor－Part 3：Calculation using physical properties
- KS R ISO 15501-1:2007 Road vehicles－Compressed natural gas(CNG) fuel system－Part 1：Safety requirements
- KS R ISO 15501-2:2007 Road vehicles－Compressed natural gas(CNG) fuel system－Part 2：Test methods
- KS I ISO 12213-3-2010(2016) Natural gas－Calculation of compression factor－Part 3：Calculation using physical properties
- KS R ISO 15500-11:2018 Road vehicles — Compressed natural gas(CNG) fuel system components — Part 11: Gas/air mixer
- KS R ISO 15500-8:2018 Road vehicles — Compressed natural gas(CNG) fuel system components — Part 8: Pressure indicator
- KS R ISO 15500-9:2018 Road vehicles — Compressed natural gas(CNG) fuel system components — Part 9: Pressure regulator
- KS R ISO 15500-13:2018 Road vehicles — Compressed natural gas(CNG) fuel system components — Part 13: Pressure relief device(PRD)
- KS R ISO 15500-5:2018 Road vehicles — Compressed natural gas(CNG) fuel system components — Part 5: Manual cylinder valve
- KS R ISO 15500-7:2018 Road vehicles — Compressed natural gas(CNG) fuel system components — Part 7: Gas injector
- KS R ISO 15500-10:2018 Road vehicles — Compressed natural gas(CNG) fuel system components — Part 10: Gas-flow adjuster
- KS R ISO 15501-2:2018 Road vehicles — Compressed natural gas(CNG) fuel systems — Part 2: Test methods
- KS R ISO 15500-19:2018 Road vehicles — Compressed natural gas(CNG) fuel system components — Part 19: Fittings
- KS R ISO 15501-1:2018 Road vehicles — Compressed natural gas(CNG) fuel systems — Part 1: Safety requirements
German Institute for Standardization, compressed natural gas density
- DIN EN ISO 15970:2014-09 Natural gas - Measurement of properties - Volumetric properties: density, pressure, temperature and compression factor (ISO 15970:2008); German version EN ISO 15970:2014
- DIN EN 13423:2001 Compressed natural gas vehicle operations; German version EN 13423:2000
- DIN EN 13423:2021-09 Natural gas vehicles - Requirements for NGV workshops and the management of compressed natural gas (CNG) vehicles; German version EN 13423:2021 / Note: This standard is part of the DVGW body of rules.
- DIN EN ISO 15403:2007 Natural gas - Designation of the quality of natural gas for use as a compressed fuel for vehicles (ISO 15403:2000); German version EN ISO 15403:2005
- DIN EN 13423:2019 Natural gas vehicles - Requirements for NGV Workshops and the management of compressed natural gas (CNG) vehicles; German and English version prEN 13423:2019
- DIN EN ISO 15970:2014 Natural gas - Measurement of properties - Volumetric properties: density, pressure, temperature and compression factor (ISO 15970:2008); German version EN ISO 15970:2014
- DIN EN ISO 15403-1:2009-10 Natural gas - Natural gas for use as a compressed fuel for vehicles - Part 1: Designation of the quality (ISO 15403-1:2006); German version EN ISO 15403-1:2008
- DIN EN 12583:2021 Gas Infrastructure - Compressor stations - Functional requirements; German and English version prEN 12583:2021
- DIN EN ISO 14469 Berichtigung 1:2019-04 Road vehicles - Compressed natural gas (CNG) refuelling connector (ISO 14469:2017); German version EN ISO 14469:2017; Corrigendum 1
- DIN EN ISO 14469:2018-10 Road vehicles - Compressed natural gas (CNG) refuelling connector (ISO 14469:2017); German version EN ISO 14469:2017
- DIN EN 12583:2021-03 Gas Infrastructure - Compressor stations - Functional requirements; German and English version prEN 12583:2021 / Note: Date of issue 2021-01-29*Intended as replacement for DIN EN 12583 (2014-07).
- DIN EN 12583:2014-07 Gas infrastructure - Compressor stations - Functional requirements; German version EN 12583:2014 / Note: To be replaced by DIN EN 12583 (2021-03).
- DIN EN ISO 13631:2003 Petroleum and natural gas industries - Packaged reciprocating gas compressors (ISO 13631:2002); German and English version EN ISO 13631:2002
- DIN EN ISO 13631:2003-02 Petroleum and natural gas industries - Packaged reciprocating gas compressors (ISO 13631:2002); German and English version EN ISO 13631:2002
- DIN EN 12583:2014 Gas infrastructure - Compressor stations - Functional requirements; German version EN 12583:2014
- DIN EN ISO 6976:2016-12 Natural gas - Calculation of calorific values, density, relative density and Wobbe indices from composition (ISO 6976:2016); German version EN ISO 6976:2016
- DIN 51624:2008 Automotive fuels - Compressed natural gas - Requirements and test methods
- DIN EN ISO 14469:2017 Road vehicles - Compressed natural gas (CNG) refuelling connector (ISO 14469:2017); German and English version FprEN ISO 14469:2017
- DIN EN ISO 10440-2:2003 Petroleum and natural gas industries - Rotary type positive-displacement compressors - Part 2: Packaged air compressors (oil-free) (ISO 10440-2:2001); German and English version EN ISO 10440-2:2001
- DIN EN ISO 10440-2:2003-02 Petroleum and natural gas industries - Rotary type positive-displacement compressors - Part 2: Packaged air compressors (oil-free) (ISO 10440-2:2001); German and English version EN ISO 10440-2:2001
- DIN EN ISO 12213-1:2005 Natural gas - Calculation of compression factor - Part 1: Introduction and guidelines (ISO 12213-1:1997); German version EN ISO 12213-1:2005
- DIN EN ISO 12213-1:2010-01 Natural gas - Calculation of compression factor - Part 1: Introduction and guidelines (ISO 12213-1:2006); German version EN ISO 12213-1:2009
- DIN EN ISO 10440-1:2008 Petroleum, petrochemical and natural gas industries - Rotary-type positive-displacement compressors - Part 1: Process compressors (ISO 10440-1:2007); English version EN ISO 10440-1:2007
- DIN EN ISO 10440-1:2008-09 Petroleum, petrochemical and natural gas industries - Rotary-type positive-displacement compressors - Part 1: Process compressors (ISO 10440-1:2007); English version EN ISO 10440-1:2007
- DIN EN ISO 12213-3:2005 Natural gas - Calculation of compression factor - Part 3: Calculation using physical properties (ISO 12213-3:1997); German version EN ISO 12213-3:2005
- DIN EN ISO 10439-4:2015-05 Petroleum, petrochemical and natural gas industries - Axial and centrifugal compressors and expander-compressors - Part 4: Expander-compressors (ISO 10439-4:2015); English version EN ISO 10439-4:2015
- DIN EN ISO 12213-2:2005 Natural gas - Calculation of compression factor - Part 2: Calculation using molar-composition analysis (ISO 12213-2:1997); German version EN ISO 12213-2:2005
Association Francaise de Normalisation, compressed natural gas density
- NF EN ISO 15970:2014 Gaz naturel - Mesurage des caractéristiques - Caractéristiques volumétriques : masse volumique, pression, température et facteur de compression
- NF X20-517*NF EN ISO 15970:2014 Natural gas - Measurement of properties - Volumetric properties : density, pressure, temperature and compression factor
- NF M60-003:2000 Compressed natural gas vehicle operations.
- NF M60-003:2021 Natural gas vehicles - Requirements for NGV workshops and the management of compressed natural gas (CNG) vehicles
- NF X20-513-1*NF EN ISO 15403-1:2008 Natural gas - Natural gas for use as a compressed fuel for vehicles - Part 1 : designation of the quality
- NF EN ISO 15403-1:2008 Gaz naturel - Gaz naturel pour usage comme carburant comprimé pour véhicules - Partie 1 : désignation de la qualité
- NF EN 12583:2022 Infrastructures gazières - Stations de compression - Prescriptions fonctionnelles
- NF EN 13423:2021 Exploitation de véhicules fonctionnant au gaz naturel - Exigences relatives aux ateliers pour véhicules GNV et à la gestion des véhicules fonctionnant au gaz naturel comprimé (GNC)
- NF EN ISO 13631:2003 Industries du pétrole et du gaz naturel - Unités de compresseurs alternatifs à gaz
- NF M50-017*NF EN 12583:2014 Gas infrastructure - Compressor stations - Functional requirements
- NF R16-224*NF EN ISO 14469:2017 Road vehicles - Compressed natural gas (CNG) refuelling connector
- NF EN ISO 14469:2017 Véhicules routiers - Connecteur de remplissage en gaz naturel comprimé (GNC)
- NF E51-235*NF EN ISO 13631:2003 Petroleum and natural gas industries - Packaged reciprocating gas compressors.
- NF B10-614*NF EN 1926:2007 Natural stone test methods - Determination of uniaxial compressive strength
- NF X20-522:2005 Natural gas - Calculation of calorific values, density, relative density and Wobbe index from composition.
- NF X20-522*NF EN ISO 6976:2017 Natural gas - Calculation of calorific values, density, relative density and Wobbe indices from composition
- NF EN ISO 6976:2017 Gaz naturel - Calcul des pouvoirs calorifiques, de la masse volumique, de la densité relative et des indices de Wobbe à partir de la composition
- NF EN ISO 12213-1:2009 Gaz naturel - Calcul du facteur de compression - Partie 1 : introduction et lignes directrices
- NF E51-231*NF EN ISO 10440-2:2002 Petroleum and natural gas industries - Rotary-type positive-displacement compressors - Part 2 : packaged air compressors (oil-free).
- NF EN ISO 10440-2:2002 Industries du pétrole et du gaz naturel - Compresseurs volumétriques de type rotatif - Partie 2 : compresseurs à air assemblé (sans huile)
- NF X20-528-1*NF EN ISO 12213-1:2009 Natural gas - Calculation of compression factor - Part 1 : introduction and guidelines
- NF EN ISO 10440-1:2008 Industries du pétrole, pétrochimique et du gaz naturel - Compresseurs volumétriques de type rotatif - Partie 1 : compresseurs de procédé
- NF EN ISO 10442:2003 Industries du pétrole, de la chimie et du gaz naturel - Compresseurs d'air centrifuges assemblés à multiplicateur intégré
- NF E51-230-1*NF EN ISO 10440-1:2008 Petroleum, petrochemical and natural gas industries - Rotary-type positive displacement compressors - Part 1 : process compressors
- NF EN ISO 10439-4:2015 Industries du pétrole, de la pétrochimie et du gaz naturel - Compresseurs axiaux et centrifuges et compresseurs-détenteurs - Partie 4 : compresseurs-détenteurs
- NF X20-528-3*NF EN ISO 12213-3:2009 Natural gas - Calculation of compression factor - Part 3 : calculation using physical properties
- NF E51-233-4*NF EN ISO 10439-4:2015 Petroleum, petrochemical and natural gas industries - Axial and centrifugal compressors and expander-compressors - Part4 : expander-compressors
National Metrological Verification Regulations of the People's Republic of China, compressed natural gas density
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, compressed natural gas density
- GB 18047-2000 Compressed natural gas as vehicle fuel
- GB/T 19236-2003 Fueling nozzle for CNG dispenser
- GB 17926-1999 Valves for compression natural gas cylinders for vehicles
- GB 17926-2009 Compressed natural gas cylinder valve for vehicle
- GB 19158-2003 Steel cylinders for the storage of compressed natural gas
- GB/T 18363-2001 Filling receptacle of CNG vehicle
- GB/T 19237-2003 Compressed natural gas dispenser for vehicle
- GB 17258-1998 Steel cylinders for the on-board of compressed natural gas as a fuel for vehicles
- GB 17258-2011 Steel cylinders for the on-board storage of compressed natural gas as a fuel for automotive vehicles
- GB/T 17258-2022 Steel cylinders for the on-board storage of compressed natural gas as a fuel for automotive vehicles
- GB/T 20735-2006 Pressure regulator of CNG vehicles
- GB 51102-2016 Code for design of compressed natural gas (CNG) supply station
- GB/T 20322-2023 Reciprocating compressors for the oil and gas industry
- GB/T 27876-2011 Technical specification for the maintenance of compressed natural gas vehicle
- GB/T 25360-2010 The reciprocating piston natural gas compressor for the vehicle gas station
- GB/T 20322-2006 Petroleum and natural gas industries. Reciprocating compressors
- GB/T 21068-2007 Standard specification for LNG density calculation models
- GB/T 18437.1-2001 The technical criterion of refitting for vehicle by using gas--Compressed natural gas for vehicle(CNGV)
- GB 24160-2009 Hoop-wrapped composite cylinders with steel liner for the on-board storage of compressed natural gas as a fuel for automotive vehicles
- GB 24163-2009 Periodic inspection and evaluation of steel cylinder for the storage of compressed natural gas for stations
- GB/T 19240-2003 Mounting requirements of special equipment for compressed natural gas vdhicles
- GB/T 29125-2012 Test methods for fuel consumption of CNG vehicles
- GB 19533-2004 Periodic inspection and evaluation of steel gas cylinders for the on board storage of compressed natural gas as a fuel
- GB/T 26780-2011 The safety requirement of fuel system for compressed natural gas vehicle in the collision
- GB/T 25359-2023 Integrated skid-mounted reciprocating compressors for the oil and gas industry
- GB/T 11062-2014 Natural gas.Calculation of calorific values, density, relative density and Wobbe index
- GB/T 11062-1998 Natural gas--Calculation of calorific values, density, relative density and Wobbe index from composition
- GB 11062-2020 Calculation methods for natural gas calorific value, density, relative density and Wobbe index
- GB/T 25359-2010 Petroleum and natural gas industries.Packaged reciprocating gas compressors
- GB/T 18437.1-2009 The technical criterion of refitting for vehicle by using gas.Part 1:Compressed natural gas automobile
- GB/T 25358-2010 Packaged rotary oil-free air compressors for petroleum and natural gas industries
- GB/T 17747.1-1999 Natural gas--Calculation of compression factor--Part 1: Introduction and Guidelines
- GB/T 17747.1-2011 Natural gas.Caculation of compression factor.Part 1: Introduction and guidelines
- GB/T 25357-2010 Petroleum,Petrochemical and natural gas industries.Process positive-displacement rotary-type compressors
- GB/T 9966.3-2020 Test methods for natural stone—Part 3:Determination of water absorption,bulk density,true density and true porosity
- GB/T 31253-2014 Natural gas.Validation for gaseous reference materials.Direct measurement of calorific value and density
- GB/T 17747.3-1999 Natural gas--Calculation of compression factor--Part 3: Calculation using physical properties
中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, compressed natural gas density
- GB 18047-2017 compressed natural gas as vehicle fuel
- GB/T 17926-2009 Compressed natural gas cylinder valve for vehicle
- GB/T 18363-2017 Filling receptacle of CNG vehicle
- GB/T 17258-2011 Steel cylinders for the on-board storage of compressed natural gas as a fuel for automotive vehicles
- GB/T 34537-2017 Hydrogen and compressed natural gas (HCNG) blended as vehicle fuel
- GB/T 24160-2009 Hoop-wrapped composite cylinders with steel liner for the on-board storage of compressed natural gas as a fuel for automotive vehicles
- GB/T 24163-2009 Periodic inspection and evaluation of steel cylinder for the storage of compressed natural gas for stations
- GB/T 19533-2004 Periodic inspection and evaluation of steel gas cylinders for the on board storage of compressed natural gas as a fuel
Taiwan Provincial Standard of the People's Republic of China, compressed natural gas density
AENOR, compressed natural gas density
- UNE-EN ISO 15970:2014 Natural gas - Measurement of properties - Volumetric properties: density, pressure, temperature and compression factor (ISO 15970:2008)
- UNE-EN 13423:2001 COMPRESSED NATURAL GAS VEHICLES OPERATIONS.
- UNE-EN 12583:2014 Gas Infrastructure - Compressor stations - Functional requirements
- UNE-EN ISO 15403-1:2008 Natural gas - Natural gas for use as a compressed fuel for vehicles - Part 1: Designation of the quality (ISO 15403-1:2006)
Professional Standard - Petroleum, compressed natural gas density
- SY/T 7546-1996 compressed natural gas for vehicles
- SY 0092-1998 Design code for compressed natural gas fueling station for vehicle
- SY/T 7683-2023 Technical specifications for pressure sealing of liquefied natural gas
- SY/T 6650-2012 Reciprocating compressors for petroleum, chemical and gas industry services
- SY 5853-1993 Regulations on Safety Management of Compressed Natural Gas Cylinders for Vehicles in Petroleum Industry
- SY/T 6650-2006 Reciprocating compressors for petroleum, chemical and gas industry services
- SY/T 4111-2007 Technical specification for construction of natural gas compressor set installation
- SY/T 6651-2006 Axial and centrifugal compressors and expander. compressors for petroleum, chemical and gas industry services
- SY 6651-2006 Axial and centrifugal compressors and expanders for the petroleum, chemical and gas industries Compressors
中华人民共和国国家质量监督检验检疫总局, compressed natural gas density
American National Standards Institute （ANSI), compressed natural gas density
Danish Standards Foundation, compressed natural gas density
- DS/EN 13423:2000 Compressed natural gas vehicle operations
- DS/EN 13423:2021 Natural gas vehicles – Requirements for NGV workshops and the management of compressed natural gas (CNG) vehicles
- DS/EN ISO 15403-1:2008 Natural gas - Natural gas for use as a compressed fuel for vehicles - Part 1: Designation of the quality
- DS/EN ISO 13631:2003 Petroleum and natural gas industries - Packaged reciprocating gas compressors
- DS/EN ISO 6976:2005 Natural gas - Calculation of calorific values, density, relative density and Wobbe index from composition
- DS/EN ISO 10440-2:2002 Petroleum and natural gas industries - Rotary-type positive-displacement compressors - Part 2: Packaged air compressors
- DS/EN ISO 10439:2003 Petroleum, chemical and gas service industries - Centrifugal compressors
- DS/EN ISO 12213-1:2009 Natural gas - Calculation of compression factor - Part 1: Introduction and guidelines
- DS/EN/ISO 10440-1:2008 Petroleum, petrochemical and natural gas industries - Rotary-type positive-displacement compressors - Part 1: Process compressors
Lithuanian Standards Office , compressed natural gas density
- LST EN 13423-2002 Compressed natural gas vehicle operations
- LST EN 13423-2021 Natural gas vehicles - Requirements for NGV workshops and the management of compressed natural gas (CNG) vehicles
- LST EN ISO 15403-1:2008 Natural gas - Natural gas for use as a compressed fuel for vehicles - Part 1: Designation of the quality (ISO 15403-1:2006)
- LST EN ISO 13631:2003 Petroleum and natural gas industries - Packaged reciprocating gas compressors (ISO 13631:2002)
- LST EN ISO 10440-2:2002 Petroleum and natural gas industries - Rotary-type positive-displacement compressors - Part 2: Packaged air compressors (oil-free) (ISO 10440-2:2001)
- LST EN ISO 10439:2003 Petroleum, chemical and gas service industries - Centrifugal compressors (ISO 10439:2002)
国家市场监督管理总局、中国国家标准化管理委员会, compressed natural gas density
- GB/T 17926-2022 Compressed natural gas cylinder valve for vehicle
- GB/T 19237-2021 Compressed natural gas dispenser for vehicles
- GB/T 24160-2022 Hoop-wrapped composite cylinders with steel liner for the on-board storage of compressed natural gas as a fuel for automotive vehicles
- GB/T 11062-2020 Natural gas—Calculation of calorific values, density, relative density and Wobbe indices from composition
RU-GOST R, compressed natural gas density
- GOST 34721-2021 Natural gas. Determination of density by picknometric method
- GOST R 53737-2009 Petroleum and natural gas industries. Reciprocating compressors. General technical requirements
- GOST 27577-2000 Compressed natural fuel gas for internal-combustion engines. Specifications
- GOST 27577-1987 Compressed natural fuel gas for gas-balloon vehicles. Specifications
- GOST 31369-2008 Natural gas. Calculation of calorific values, density, relative density and Wobbe index from composition
- GOST 31369-2021 Natural gas. Calculation of calorific values, mass volume, relative density and Wobbe indices from the composition
- GOST 31843-2013 Pitroleum and natural gas industries. Reciprocating compressors. General technical requirements
- GOST R 51753-2001 High pressure cylinders for the compressed natural gas as a fuel for automotive vehicles. General specifications
- GOST 30319.2-1996 Natural gas. Methods of calculation of physical properties. Definition of compressibility coefficient
- GOST R 54802-2011 Petroleum and natural gas industries. Packaged reciprocating gas compressor. Technical requirements
Professional Standard - Automobile, compressed natural gas density
- QC/T 746-2006 High pressure pipelines for compressed natural vehicles
- QC/T 674-2007 Solenoid valve of CNG vehicles
- QC/T 690-2002 Compressed Natural Gas Bus Technical Conditions
- QC/T 674-2000 Compressed Natural Gas Solenoid Valve for Automobile
- QC/T 671-2000 Compressed Natural Gas Pressure Reducing Regulators for Automobiles
- QC/T 245-1998 Technical conditions for compressed natural gas vehicle gas system
- QC/T 257-1998 Compressed Natural Gas Vehicle Type Test Regulations
- QC/T 245-2002 Technical specifications for special equipment for compressed natural gas vehicles
- QC/T 694-2002 Diesel/compressed natural gas dual fuel engine specification
Indonesia Standards, compressed natural gas density
Professional Standard - Machinery, compressed natural gas density
- JB/T 11422-2013 Hydraulic natural gas compressor for CNG refueling station
- JB/T 10298-2001 The natural gas compressor for the vehicle gas station
- JB/T 5297-1991 Positive displacement natural gas compressor for petroleum industry - Basic parameter
Henan Provincial Standard of the People's Republic of China, compressed natural gas density
- DB41/T 1273-2016 IC card compressed natural gas smart dispenser
- DB41/T 2349-2022 Code for risk prevention and control of special pressurized equipment for compressed natural gas filling stations
Canadian Standards Association (CSA), compressed natural gas density
KR-KS, compressed natural gas density
- KS I ISO 15403-2008 Natural gas－Designation of the quality of natural gas for use as a compressed fuel for vehicles
- KS I ISO 6976-2017 Natural gas — Calculation of calorific values, density, relative density and Wobbe indices from composition
- KS R ISO 15500-15-2018(2023) Road vehicles — Compressed natural gas(CNG) fuel system components — Part 15: Gas tight housing and ventilation hose
- KS R ISO 15500-15-2018 Road vehicles — Compressed natural gas(CNG) fuel system components — Part 15: Gas tight housing and ventilation hose
- KS I ISO 12213-1-2022 Natural gas Calculat i on of compression factor Part 1: Introduction and guidelines
- KS R ISO 15500-12-2018 Road vehicles — Compressed natural gas(CNG) fuel system components — Part 12: Pressure relief valve(PRV)
- KS R ISO 15500-12-2018(2023) Road vehicles — Compressed natural gas(CNG) fuel system components — Part 12: Pressure relief valve(PRV)
- KS R ISO 15500-11-2018 Road vehicles — Compressed natural gas(CNG) fuel system components — Part 11: Gas/air mixer
- KS R ISO 15500-9-2018 Road vehicles — Compressed natural gas(CNG) fuel system components — Part 9: Pressure regulator
- KS R ISO 15500-13-2018 Road vehicles — Compressed natural gas(CNG) fuel system components — Part 13: Pressure relief device(PRD)
- KS R ISO 15500-8-2018 Road vehicles — Compressed natural gas(CNG) fuel system components — Part 8: Pressure indicator
- KS R ISO 15500-13-2018(2023) Road vehicles — Compressed natural gas(CNG) fuel system components — Part 13: Pressure relief device(PRD)
- KS R ISO 15500-8-2018(2023) Road vehicles — Compressed natural gas(CNG) fuel system components — Part 8: Pressure indicator
- KS R ISO 15500-7-2018 Road vehicles — Compressed natural gas(CNG) fuel system components — Part 7: Gas injector
- KS R ISO 15500-5-2018 Road vehicles — Compressed natural gas(CNG) fuel system components — Part 5: Manual cylinder valve
- KS R ISO 15500-10-2018 Road vehicles — Compressed natural gas(CNG) fuel system components — Part 10: Gas-flow adjuster
- KS R ISO 15500-7-2018(2023) Road vehicles — Compressed natural gas(CNG) fuel system components — Part 7: Gas injector
- KS R ISO 15500-11-2018(2023) Road vehicles — Compressed natural gas(CNG) fuel system components — Part 11: Gas/air mixer
CZ-CSN, compressed natural gas density
- CSN 38 5572-1988 Natural gas. Calculation of calorific value, density and relative density
JSAE - Society of Automotive Engineers of Japan@ Inc., compressed natural gas density
- JASO E203-2005 Compressed Natural Gas Vehicles - Refueling Connectors
- JASO E203-1997 Road Vehicles - Compressed Natural Gas Fueling Connectors
- JASO E207-2006 Compressed natural gas vehicles - Tube fittings and tubing - Performance requirements
- JASO E205-2003 Compressed natural gas vehicles - Opening and shutting valves - Performance requirements
- JASO M111-1998 Compressed natural gas vehicles - Textile reinforced plastic fuel hoses for high pressure use - Performance requirements
RO-ASRO, compressed natural gas density
- STAS 11747-1980 CAZ compressors PACKINGS FOR NONLUBRICATED GAS COMPRESSORS Typification
- STAS 11746-1980 Gaz compressors ASPIRATION AND DISCHARGE VALVES Typification
- STAS 11748-1980 Gas compressors TEFLON PISTON RINGS AND WEAR RANDS
Group Standards of the People's Republic of China, compressed natural gas density
- T/CAAMTB 108-2022 35MPa compressed natural gas (CNG) filling gun for automobiles
- T/CAAMTB 107-2022 35MPa compressed natural gas (CNG) filling port for automobiles
- T/CATSI 02018-2022 Fully-wrapped carbon fiber reinforced cylinder with a plastic liner for on-board storage of natural gas as a fuel for automotive vehicles (ISO 11439:2013, Gas cylinders — High pressure cylinders for the on-board storage of natural gas as a fuel for automo
- T/CQCNG 1-2019 Mounting specifications of CNG dedicated equipment for in-use gasoline vehicle
- T/CFA 020101071-2022 Thermal fatigue resistant ferritic vermicular graphite iron castings for compressed natural gas engines
- T/SCTX 004-2019 Rules for evaluating the capacity of installation units of compressed natural gas cylinders and special devices for vehicles
- T/LADA 016-2019 Technical conditions for installing special equipment for compressed natural gas vehicles on in-use gasoline vehicles
- T/SCQJNY 0001-2019 Technical conditions for installation of special equipment for compressed natural gas vehicles on in-use gasoline vehicles
YU-JUS, compressed natural gas density
- JUS H.F8.306-1989 Matural gas. Calcnlaticm of compressib±lity and supercompressibxlity factors
- JUS H.F8.304-1988 Hatural gas. Calculation of calorific valne, dtmsitjr and relative density
HU-MSZT, compressed natural gas density
Natural Gas Processor's Association (NGPA), compressed natural gas density
- GPA RR-147-1995 Density Measurements on Natural Gas Liquids
- GPA STD 2172-1996 Calculation of Gross Heating Value, Relative Density and Compressibility Factor for Natural Gas Mixtures from Compositional Analysis (API MPMS 14.5)
- GPA TP-3-1973 Model for the Precise Calculation of Liquefied Natural Gas Densities
- GPA RR-53-1981 Experimental Densities and Enthalpies for Water-Natural Gas Systems
- GPA STD 2172-2009 Calculation of Gross Heating Value, Relative Density, Compressibility and Theoretical Hydrocarbon Liquid Content for Natural Gas Mixtures for Custody Transfer (Third Edition)
- GPA RB-101-1943 Compression and Charcoal Tests for Determining the Natural Gasoline Content of Natural Gas
- GPA STD 2172-2014 Calculation of Gross Heating Value@ Relative Density@ Compressibility and Theoretical Hydrocarbon Liquid Content for Natural Gas Mixtures for Custody Transfer (Third Edition)
- GPA CODE 101-1943 Compression and Charcoal Tests for Determining the Natural Gasoline Content of Natural Gas
PL-PKN, compressed natural gas density
- PN-EN 13423-2021-03 E Natural gas vehicles -- Requirements for NGV workshops and the management of compressed natural gas (CNG) vehicles
ES-UNE, compressed natural gas density
- UNE-EN 13423:2021 Natural gas vehicles - Requirements for NGV workshops and the management of compressed natural gas (CNG) vehicles
- UNE-EN ISO 14469:2018 Road vehicles - Compressed natural gas (CNG) refuelling connector (ISO 14469:2017)
- UNE-EN 12583:2023 Gas Infrastructure - Compressor stations - Functional requirements
- UNE-EN ISO 13631:2002 Petroleum and natural gas industries. Packaged reciprocating gas compressors (ISO 13631:2002) (Endorsed by AENOR in December of 2002.)
- UNE-EN ISO 6976:2017 Natural gas - Calculation of calorific values, density, relative density and Wobbe indices from composition (ISO 6976:2016)
- UNE-EN ISO 10440-2:2001 Petroleum and natural gas industries - Rotary-type positive- displacement compressors - Part 2: Packaged air compressors (oil- free) (ISO 10440-2:2001) (Endorsed by AENOR in March of 2002.)
- UNE-EN ISO 10440-1:2007 Petroleum, petrochemical and natural gas industries - Rotary-type positive-displacement compressors - Part 1: Process compressors (ISO 10440-1:2007) (Endorsed by AENOR in February of 2008.)
- UNE-EN ISO 10439-4:2015 Petroleum, petrochemical and natural gas industries - Axial and centrifugal compressors and expander-compressors - Part 4: Expander-compressors (ISO 10439-4:2015) (Endorsed by AENOR in April of 2015.)
Zhejiang Provincial Standard of the People's Republic of China, compressed natural gas density
- DB3304/T 007-2018 Service specification for compressed natural gas filling stations for vehicles
National Metrological Technical Specifications of the People's Republic of China, compressed natural gas density
- JJF 1369-2012 Program of Pattern Evaluation of Compressed Natural Gas Dispensers
- JJF 1583-2016 Calibration Specification for Master Meter Method Verification Facility of Compressed Natural Gas Dispenser
AT-ON, compressed natural gas density
- OENORM EN 13423-2021 Natural gas vehicles - Requirements for NGV workshops and the management of compressed natural gas (CNG) vehicles
CH-SNV, compressed natural gas density
- SN EN 13423-2021 Natural gas vehicles - Requirements for NGV workshops and the management of compressed natural gas (CNG) vehicles
IT-UNI, compressed natural gas density
- UNI EN 13423-2021 Natural gas vehicles - Requirements for NGV workshops and the management of compressed natural gas (CNG) vehicles
工业和信息化部, compressed natural gas density
- QC/T 245-2017 Compressed natural gas vehicle gas system technical conditions
Chongqing Provincial Standard of the People's Republic of China, compressed natural gas density
- DB50/T 497-2013 On-site sampling method of compressed natural gas for vehicles
- DB50/ 5004-1998 Code for design constraction and acceptance of compressed natural gas filling station for vehicle
- DB50/T 22-1999 Compressed natural gas-gasoline dual fuel vehicle maintenance process specification
American Society for Testing and Materials (ASTM), compressed natural gas density
- ASTM D8080-21 Standard Specification for Compressed Natural Gas (CNG) and Liquefied Natural Gas (LNG) Used as a Motor Vehicle Fuel
- ASTM D8251-23 Standard Practice for Determining Compressor Oil Carryover in Compressed Natural Gas Used as a Natural Gas Motor Vehicle Fuel
- ASTM D4784-93(1998) Standard for LNG Density Calculation Models
- ASTM D4784-93(2003) Standard for LNG Density Calculation Models
- ASTM D4784-93(2015) Standard Specification for LNG Density Calculation Models
- ASTM D4784-93(2010) Standard for LNG Density Calculation Models
- ASTM D4784-23 Standard Specification for Liquefied Natural Gas Density Calculation Models
Sichuan Provincial Standard of the People's Republic of China, compressed natural gas density
- DB51/T 1787-2014 Specifications for quality control of compressed natural gas filling stations for vehicles
- DB51/T 929-2012 Inspection specification for in-use automotive compressed natural gas equipment
SAE - SAE International, compressed natural gas density
- SAE J1616-2017 Recommended Practice for Compressed Natural Gas Vehicle Fuel
- SAE J1616-2016 Recommended practices for compressed natural gas automotive fuel
- SAE J1616-1994 Recommended Practice for Compressed Natural Gas Vehicle Fuel@ Recommended Practice
Beijing Provincial Standard of the People's Republic of China, compressed natural gas density
- DB11/T 451-2017 Technical specifications for safe operation of liquefied petroleum gas, compressed natural gas and liquefied natural gas supply stations
- DB11/T 451-2007 Management specification for safe operation of liquefied petroleum gas and compressed natural gas supply stations
- DB11/T 857-2012 Requirements for the use and periodic inspection of compressed natural gas fiber-wound gas cylinders for vehicles
API - American Petroleum Institute, compressed natural gas density
- API MPMS 14.5-1996 Calculation of Gross Heating Value@ Relative Density and Compressibility Factor for Natural Gas Mixtures from Compositional Analysis (GPA STD 2172-96)
- API MPMS 14.5-2009 Calculation of Gross Heating Value@ Relative Density@ Compressibility and Theoretical Hydrocarbon Liquid Content for Natural Gas Mixtures for Custody Transfer (THIRD EDITION)
- API MPMS 14.2-1994 Compressibility Factors of Natural Gas and Other Related Hydrocarbon Gases (Second Edition)
- API SPEC 11P-1989 Specification for Packaged Reciprocating Compressors for Oil and Gas Production Services
- API STD 617-1995 Centrifugal Compressors for Petroleum@ Chemical@ and Gas Service Industries
- API STD 618-1995 Reciprocating Compressors for Petroleum@ Chemical@ and Gas Industry Services (Fourth Edition)
- API STD 617 ERTA-1998 Centrifugal Compressors for Petroleum@ Chemical@ and Gas Service Industries (SIXTH EDITION)
ZA-SANS, compressed natural gas density
- SANS 208:2005 The design and installation of compressed natural gas (CNG) vehicle filling stations
- SANS 13631:2003 Petroleum and natural gas industries - Packaged reciprocating gas compressors
Guizhou Provincial Standard of the People's Republic of China, compressed natural gas density
- DB52/T 1034-2015 Safety management specification for compressed natural gas vehicle cylinder filling
- DB52/T 1034-2019 Safety management specification for compressed natural gas vehicle cylinder filling
Anhui Provincial Standard of the People's Republic of China, compressed natural gas density
- DB34/T 973-2020 Safety management specification for compressed natural gas vehicle cylinder filling
- DB34/T 1545-2011 Regulation for supervision and inspection of installing compressed natural gas bottles for automotive vehicles
- DB34/T 2040-2014 Compressed natural gas (CNG) filling station operation and metering management specification
NZ-SNZ, compressed natural gas density
- NZS 5454:1989 LIGHTWEIGHT STEEL AUTOMOTIVE COMPRESSED NATURAL GAS CYLINDERS FOR USE IN NEW ZEALAND
BE-NBN, compressed natural gas density
Professional Standard - Traffic, compressed natural gas density
- JT/T 512-2004 Specification for the maintenance and inspection of compressed natural gas vehicle
American Bureau of Shipping , compressed natural gas density
ABS - American Bureau of Shipping, compressed natural gas density
Shandong Provincial Standard of the People's Republic of China, compressed natural gas density
- DB37/T 1731-2010 Specification for inspection of special equipment for compressed natural gas vehicles
未注明发布机构, compressed natural gas density
Standard Association of Australia （SAA）, compressed natural gas density
FMVSS - Federal Motor Vehicle Safety Standards, compressed natural gas density
CEN - European Committee for Standardization, compressed natural gas density
- EN ISO 13631:2002 Petroleum and natural gas industries Packaged reciprocating gas compressors
- EN ISO 12213-1:2005 Natural gas Calculation of compression factor Part 1: Introduction and guidelines
- EN ISO 12213-3:1998 Natural gas Calculation of compression factor Part 3: Calculation using physical properties
国家能源局, compressed natural gas density
- SY/T 4111-2018 Technical specifications for natural gas compressor unit installation engineering construction
- SY/T 6961-2021 Oil and gas drilling equipment oil and gas field vehicle-mounted reciprocating compressor
Jiangsu Provincial Standard of the People's Republic of China, compressed natural gas density
- DB32/T 2614-2014 Safety management specifications for clean energy (compressed natural gas) vehicle filling stations
- DB32/T 2613-2014 Clean energy (compressed natural gas) vehicle emergency rescue service specification
CU-NC, compressed natural gas density
- NC 43-32-1987 Natural and Artificial Wood Industry. Natural Wood. Determination of Proportional Limit to Compression Perpendicular to Grain. Testing Method
Xinjiang Provincial Standard of the People's Republic of China, compressed natural gas density
- DB65/T 2886-2008 Periodic inspection and evaluation of gas cylinders with metal liners of compressed natural gas for automotive vehicles
TH-TISI, compressed natural gas density
- TIS 2325.9-2007 Road vehicles.compressed natural gas (cng) fuel system components.part 9: pressure regulator
- TIS 2325.12-2007 Road vehicles.compressed natural gas (cng) fuel system components.part 12: pressure relief valve (prv)
- TIS 2325.13-2007 Road vehicles.compressed natural gas (cng) fuel system components.part 13: pressure relief device (prd)
- TIS 2325.8-2007 Road vehicles.compressed natural gas (cng) fuel system components.part 8: pressure indicator
- TIS 2325.7-2007 Road vehicles.compressed natural gas (cng) fuel system components.part 7: gas injector
- TIS 2325.11-2007 Road vehicles.compressed natural gas (cng) fuel system components.part 11: gas/air mixer
- TIS 2325.19-2007 Road vehicles.compressed natural gas (cng) fuel system components.part 19: fittings
(U.S.) Ford Automotive Standards, compressed natural gas density
US-FCR, compressed natural gas density
GOSTR, compressed natural gas density
- GOST ISO 12619-3-2017 Road vehicles. Compressed hydrogen and hydrogen/natural gas blend fuel system components. Part 3. Pressure regulator