ZH
RU
ES

molecular weight of p

molecular weight of p, Total:500 items.

In the international standard classification, molecular weight of p involves: Electrical accessories, Insulating materials, Radiation measurements, Semiconducting materials, General methods of tests and analysis for food products, Electrical and electronic testing, Protection of and in buildings, Capacitors, Farming and forestry, Crude petroleum, Products of non-ferrous metals, Petroleum products in general, Equipment for processing of minerals, Electronic tubes, Plastics, Nuclear energy engineering, Air quality, Fuels, Spices and condiments. Food additives, Analytical chemistry, Non-ferrous metals, Protection against dangerous goods, Mathematics, Water quality, Interface and interconnection equipment, Ferrous metals, Products of the chemical industry, Laboratory medicine, Electronic display devices, Construction materials, Optics and optical measurements, Power transmission and distribution networks, Rubber, Installations in buildings, Agricultural machines, implements and equipment, Pharmaceutics, Raw materials for rubber and plastics, Optical equipment, Quantities and units, Testing of metals, Piezoelectric and dielectric devices, Medical equipment, Environmental protection, Iron and steel products, Powder metallurgy, Applications of information technology, Technical product documentation, Electrical equipment for working in special conditions, Edible oils and fats. Oilseeds, Natural gas, Fasteners for aerospace construction, Telecommunication systems, Astronomy. Geodesy. Geography, Radiation protection, Microbiology, Radiocommunications, Rubber and plastics products, Products of the textile industry, Textile fibres, Electricity. Magnetism. Electrical and magnetic measurements, Reinforced plastics, Fibre optic communications, Welding, brazing and soldering.

International Telecommunication Union (ITU), molecular weight of p

ITU-T P.862.3-2007 Application guide for objective quality measurement based on Recommendations P.862, P.862.1 and P.862.2
ITU-T P.862.3 CORR 1-2011 Application guide for objective quality measurement based on Recommendations P.862, P.862.1 and P.862.2 Corrigendum 1 (Study Group 12)
ITU-T P.800 FRENCH-1996 Methods for Subjective Determination of Transmission Quality
ITU-T P.800 SPANISH-1996 Methods for Subjective Determination of Transmission Quality
ITU-T SERIE H SUPP 6 FRENCH-2006 Control load quantum for decomposed gateways
ITU-T SERIE H SUPP 6 SPANISH-2006 Control load quantum for decomposed gateways
ITU-T G.671 NOTE-2006 Transmission characteristics of optical components and subsystems
ITU-T P.862 AMD 2 FRENCH-2005 Perceptual evaluation of speech quality (PESQ): An objective method for end-to-end speech quality assessment of narrow-band telephone networks and speech codecs Amendment 2: Revised Annex A – Reference implementations and conformance testing for ITU-T Rec
ITU-T P.862 AMD 2 SPANISH-2005 Perceptual evaluation of speech quality (PESQ): An objective method for end-to-end speech quality assessment of narrow-band telephone networks and speech codecs Amendment 2: Revised Annex A – Reference implementations and conformance testing for ITU-T Rec
ITU-T P.51 FRENCH-1996 ARTIFICIAL MOUTH
ITU-T P.51 SPANISH-1996 ARTIFICIAL MOUTH
ITU-T G.671 AMD 2-2006 Transmission characteristics of optical components and subsystems Amendment 2
ITU-T G.671 AMD 1-2006 Transmission characteristics of optical components and subsystems Amendment 1
ITU-T G.671-2005 Transmission characteristics of optical components and subsystems SERIES G: TRANSMISSION SYSTEMS AND MEDIA, DIGITAL SYSTEMS AND NETWORKS Transmission media characteristics ?Characteristics of optical components and subsystems Study Group 15
ITU-T P.862 CORR 1-2007 Perceptual evaluation of speech quality (PESQ): An objective method for end-to-end speech quality assessment of narrow-band telephone networks and speech codecs Corrigendum 1 Study Group 12 [Superseded: ITU-T P.861 ITU-T P.861]
ITU-T J.89-1999 Transport Mechanism for Component-Coded Digital Television Signals Using MPEG-2 4:2:2 P@ML Including All Service Elements for Contribution and Primary Distribution - Series J: Transmission of Television Sound Programme and Other Multimedia Signals - Digit

Professional Standard - Electron, molecular weight of p

SJ/T 9555.1-1993 P-type connectors--Quality grading standard
SJ 2799-1987 Method for determination of trace water in electronic grade gases--Dew point method
SJ/T 9525-1993 Quality grade standard for electronic organ

IN-BIS, molecular weight of p

FI-SFS, molecular weight of p

SFS C.6.12-1959

Danish Standards Foundation, molecular weight of p

DS/EN 60641-3-2:2008 Pressboard and presspaper for electrical purposes - Part 3: Specifications for individual materials - Sheet 2: Requirements for presspaper, types P.2.1, P.4.1, P.4.2, P.4.3 and P.6.1
DS/CEN/TR 10353:2012 Chemical analysis of ferrous materials - Analysis of ferro-silicon - Determination of Al, Ti and P by inductively coupled plasma optical emission spectrometry
DS/EN ISO 2871-1:2010 Surface active agents - Detergents - Determination of cationic-active matter content - Part 1: High-molecular-mass cationic-active matter
DS/EN 14469-2:2004 Pigments and extenders - Testing of colouring materials in plasticized polyvinyl chloride (PVC-P) - Part 2: Preparation of test specimens
DS/EN 60444-7:2004 Measurement of quartz crystal unit parameters - Part 7: Measurement of activity and frequency dips of quartz crystal units
DS/EN ISO 16014-5:2012 Plastics - Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography - Part 5: Method using light-scattering detection
DS/EN 4114:2009 Aerospace series - Clamps, loop (''P'' type) in aluminium alloy with rubber cushioning - Dimensions, masses
DS/EN ISO 2871-2:2010 Surface active agents - Detergents - Determination of cationic-active matter content - Part 2: Cationic-active matter of low molecular mass (between 200 and 500)

German Institute for Standardization, molecular weight of p

DIN EN 61526:2007 Radiation protection instrumentation - Measurement of personal dose equivalents H<(Index)p>(10) and H<(Index)p>(0,07) for X, gamma, neutron and beta radiations - Direct reading personal dose equivalent meters and monitors (IEC 61526:2005, modified); Germa
DIN EN 61526:2013 Radiation protection instrumentation - Measurement of personal dose equivalents H<(Index)p>(10) and H<(Index)p>(0,07) for X, gamma, neutron and beta radiations - Direct reading personal dose equivalent meters (IEC 61526:2010, modified); German version EN
DIN 45910-172:1991 Harmonized system of quality assessment for electronic components; detail specification: fixed capacitors of ceramic dielectric, class 2; assessment level P
DIN EN 60641-3-2 Bb.1:2010 Specification for pressboard and presspaper for electrical purposes - Part 3: Specifications for individual materials - Sheet 2: Requirements for presspaper, types P.2.1, P.4.1, P.4.2, P.4.3 and P.6.1 - Supplement 1: Comparison of the types
DIN EN 60641-3-2:2008 Pressboard and presspaper for electrical purposes - Part 3: Specifications for individual materials - Sheet 2: Requirements for presspaper, types P.2.1, P.4.1, P.4.2, P.4.3 and P.6.1 (IEC 60641-3-2:2007); German version EN 60641-3-2:2008
DIN 6809-1:2010-03 Clinical dosimetry - Part 1: Radiation quality of photon and electron radiation
DIN 38413-1:1982-03 German standard methods for the analysis of water, waste water and sludge; Individual components (Group P); Determination of hydrazine (P 1)
DIN 4895-2:1977 Orthogonal coordinate systems; differential operators of vector analysis
DIN 4895-2:1977-11 Orthogonal coordinate systems; differential operators of vector analysis
DIN 38413-4:1986 German standard methods for the examination of water, waste water and sludge; individual constituents (group P); determination of carbon disulfide (P 4)
DIN EN ISO 2871-1:2010-06 Surface active agents - Detergents - Determination of cationic-active matter content - Part 1: High-molecular-mass cationic-active matter (ISO 2871-1:2010); German version EN ISO 2871-1:2010
DIN 6809-1:2010 Clinical dosimetry - Part 1: Radiation quality of photon and electron radiation
DIN EN 29658:1992 Determination of aluminium content of steel by flame atomic absorption spectrometry (ISO 9658:1990); german version EN 29658:1991
DIN EN ISO 16014-5:2019-09 Plastics - Determination of average molecular weight and molecular weight distribution of polymers using size-exclusion chromatography - Part 5: Light-scattering method (ISO 16014-5:2019); German version EN ISO 16014-5:2019
DIN 6802-3:2007 Neutron dosimetry - Part 3: Methods for neutron measurement in radiation protection
DIN 6809-8:2023-08 Clinical dosimetry - Part 8: Dosimetry of small photon fields
DIN 44402-8:1973 Measurements of the electrical properties of electronic tubes; measurement of equivalent noise resistance
DIN 25456-4:1999 Neutron fluence measurement - Part 4: Fast-neutron fluence determination with niob activation detectors
DIN 25456-2:1999 Neutron fluence measurement - Part 2: Fast-neutron fluence determination with iron activation detectors
DIN 25456-6:1999 Neutron fluence measurement - Part 6: Fast-neutron fluence determination with thorium fission detectors
DIN 25456-5:1999 Neutron fluence measurement - Part 5: Fast-neutron fluence determination with copper activation detectors
DIN 25456-3:1999 Neutron fluence measurement - Part 3: Fast-neutron fluence determination with nickel activation detectors
DIN IEC/TS 62607-3-2:2018-09*DIN SPEC 42607-3-2:2018-09 Nanomanufacturing - Key control characteristics - Part 3-2: Luminescent nanoparticles - Determination of mass of quantum dot dispersion (IEC/TS 62607-3-2:2017)
DIN 38413-2:1988 German standard methods for the examination of water, waste water and sludge; individual constituents (group P); determination of vinyl chloride by headspace gas chromatography (P 2)
DIN 6802-3:2007-06 Neutron dosimetry - Part 3: Methods for neutron measurement in radiation protection
DIN EN ISO 2871-2:2010-06 Surface active agents - Detergents - Determination of cationic-active matter content - Part 2: Cationic-active matter of low molecular mass (between 200 and 500) (ISO 2871-2:2010); German version EN ISO 2871-2:2010
DIN EN 14469-2:2004-08 Pigments and extenders - Testing of colouring materials in plasticized polyvinyl chloride (PVC-P) - Part 2: Preparation of test specimens; German version EN 14469-2:2004

Korean Agency for Technology and Standards (KATS), molecular weight of p

KS C IEC 60641-3-2-2015(2020) Specification for pressboard and presspaper for electrical purposes－Part 3：Specifications for individual materials－Sheet 2：Requirements for presspaper, types P.2.1, P.4.1, P.4.2, P.4.3, P.6.1 and P.7.
KS C IEC 60151-0-2004(2009) Measurements of the electrical properties of electronic tubes and valves－Part 0：Precautions relating to methods of measurement of electronic tubes and valves
KS C IEC 60151-1-2004(2009) Measurements of the electrical properties of electronic tubes and valves－Part 1：Measurement of electrode current
KS C IEC 60151-4-2004(2009) Measurements of the electrical properties of electronic tubes and valves－Part 4：Methods of measuring noise factor
KS D ISO 14237-2003(2018)
KS C IEC 60151-0:2004 Measurements of the electrical properties of electronic tubes and valves-Part 0:Precautions relating to methods of measurement of electronic tubes and valves
KS C IEC 60151-0:2013 Measurements of the electrical properties of electronic tubes and valves－Part 0：Precautions relating to methods of measurement of electronic tubes and valves
KS C IEC 60151-16-2003(2008) Measurements of the electrical properties of electronic tubes and valves－Part 16：Methods of measurement for television picture tubes
KS F 2598-2011 Standard test method for distribution of total chloride ion in concrete
KS C IEC 60151-2-2004(2009) Measurements of the electrical properties of electronic tubes and valves－Part 2：Measurement of heater or filament current
KS M ISO 2871-2007(2022) Surface active agents－Detergents－Determination of cationic-active matter content－High-molecular-mass cationic-active matter
KS M ISO 2871-2007(2017) Surface active agents－Detergents－Determination of cationic-active matter content－High-molecular-mass cationic-active matter
KS C IEC 60151-1:2004 Measurements of the electrical properties of electronic tubes and valves-Part 1:Measurement of electrode current
KS C IEC 60151-1:2013 Measurements of the electrical properties of electronic tubes and valves－Part 1：Measurement of electrode current
KS M ISO 2871-2-2007(2022) Surface active agents－Detergents－Determination of cationic-active matter content－Cationic-active matter of low molecular mass(between 200 and 500)
KS C IEC 60151-3-2004(2009) Measurements of the electrical properties of electronic tubes and valves－Part 3：Measurement of equivalent input and output admittances
KS D ISO 14595:2012 Microbeam analysis-Electron probe microanalysis-Guidelines for the specification of certified reference materials(CRMs)
KS C IEC 60444-7:2016 Measurement of quartz crystal unit parameters ― Part 7: Measurement of activity and frequency dips of quartz crystal units
KS C IEC 60444-9:2016 Measurement of quartz crystal unit parameters ― Part 9: Measurement of spurious resonance of piezoelectric crystal units
KS M ISO 2871-2-2007(2017) Surface active agents－Detergents－Determination of cationic-active matter content－Cationic-active matter of low molecular mass(between 200 and 500)
KS M ISO 16564:2007 Rubber, raw natural－Determination of average molecular mass and molecular－mass distribution by size exclusion chromatography(SEC)
KS C IEC 60151-4:2004 Measurements of the electrical properties of electronic tubes and valves-Part 4:Methods of measuring noise factor
KS C IEC 60151-4:2013 Measurements of the electrical properties of electronic tubes and valves－Part 4：Methods of measuring noise factor
KS M ISO 16564-2007(2022) Rubber, raw natural－Determination of average molecular mass and molecular－mass distribution by size exclusion chromatography(SEC)
KS M ISO 16564-2007(2017) Rubber, raw natural－Determination of average molecular mass and molecular－mass distribution by size exclusion chromatography(SEC)
KS D ISO 7627-2:2012 Hardmetals－Chemical analysis by flame atomic absorption spectrometry－Part 2：Determination of calcium, potassium, magnesium and sodium in contents from 0.001 % to 0.02 % (mass fraction)
KS D ISO 7627-3:2012 Hardmetals－Chemical analysis by flame atomic absorption spectrometry－Part 3：Determination of cobalt, iron, manganese and nickel in contents from 0.01 to 0.5 % (mass fraction)
KS D ISO 7627-4:2012 Hardmetals－Chemical analysis by flame atomic absorption spectrometry－Part 4：Determination of molybdenum, titanium and vanadium in contents from 0.01 to 0.5 % (mass fraction)
KS P ISO TR 14969-2008(2018) Medical devices－Quality management systems－Guidance on the application of KS P ISO 13485:2007
KS C IEC 60151-2:2004 Measurements of the electrical properties of electronic tubes and valves-Part 2:Measurement of heater or filament current
KS C IEC 60151-16:2003 Measurements of the electrical properties of electronic tubes and valves-Part 16:Methods of measurement for television picture tubes
KS C IEC 60151-16:2013 Measurements of the electrical properties of electronic tubes and valves－Part 16：Methods of measurement for television picture tubes
KS C IEC 60151-2:2013 Measurements of the electrical properties of electronic tubes and valves－Part 2：Measurement of heater or filament current
KS D ISO 13898-3:2010 Steel and iron-Determination of nickel, copper and cobalt contents-Inductively coupled plasma atomic emission spectrometric method-Part 3:Determination of copper content
KS D ISO 13898-4:2010 Steel and iron－Determination of nickel, copper and cobalt contents－Inductively coupled plasma atomic emission spectrometric method－Part 4：Determination of cobalt content
KS D ISO 13898-2:2010 Steel and iron－Determination of nickel, copper and cobalt contents－Inductively coupled plasma atomic emission spectrometric method－Part 2：Determination of nickel content

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, molecular weight of p

GB/T 29852-2013 Test method for measuring phosphorus, arsenic and antimony in silicon materials used for photovoltaic applications by secondary ion mass spectrometry
GB/T 17282-1998 Method for estimation of molecular weight (relative molecular mass) of petroleum oils from viscosity measurements
GB/T 21864-2008 Standard test method for molecular weight averages and molecular weight distribution of polystyrene.High performance size-exclusion chromatography
GB/T 6599-1986 Determination of molecular weight averages and molecular weight distribution of polystyrene standards by steric exclusion chromatography
GB/T 36214.4-2018 Plastics.Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography.Part 4:High-temperature method
GB/T 23961-2009(英文版) Determination of low molecular weight aliphatic amines—Gas chromatographic method
GB/T 15244-2002 Quantitative analysis of glass by electron probe microanalysis
GB/T 31388-2015 Heat cost allocators with electrical energy supply
GB 7908-1999 Classification of forest tree seed quality
GB/T 26422-2010 Classification of Azadirachta indica seed quality
GB/T 17360-1998 Method of quantitative electron probe microanalysis on low contents of Si and Mn in steels
GB/T 17360-2008 Quantitative analysis method of low content Si and Mn in steel with electron probe microanalysis
GB/T 36214.2-2018 Plastics.Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography.Part 2:Universal calibration method
GB 6141-2008 Quality grading of legume seeds
GB/T 26615-2011 Quality grading of the princes-feather(Amaranthus hypochondriacus L.) seeds
GB/T 26614-2011 Quality grading of the Chinese ephedra(Ephedra L.) seeds
GB 3102.8-1993 Quantities and units of physical chemistry and molecular physics
GB/T 27896-2011 Test method for water vapor content of natural gas using.Electronic moisture analyzers
GB/T 11446.5-1997 Test method for measuring trace metals in electronic grade water by atomic absorption spectrophotometry
GB/T 11446.5-2013 Test method for measuring trace metals in electronic grade water by atomic absorption spectrophotometry
GB/T 13163.3-2014 Radiation protection instrumentation.Radon and radon decay product measuring instruments.Part 3: Specific requirements for radon decay product measuring instruments
GB/T 11465-1989 Temperature profile for electronic measuring instruments
GB 6142-2008 Quality grading of the grass seeds
GB/T 29554-2013 Ultra high molecular weight polyethylene fibre
GB 11465-1989 Thermal Profiles for Electronic Measuring Instruments

United States Navy, molecular weight of p

NAVY A-A-59315-1998 POWDER MATERIALS FOR FLAME AND PLASMA SPRAYED COATINGS, GENERAL REQUIREMENTS FOR [Superseded: NAVY MIL-P-85856 NOTICE 2, NAVY MIL-P-85856 (2), NAVY MIL-P-85856 SUPP 1, NAVY MIL-P-85856, NAVY MIL-P-85856 NOTICE 1, NAVY MIL-P-85856 INT AMD 1]

American Society of Mechanical Engineers (ASME), molecular weight of p

ASME 2321-1-2001 Exemption from Postweld Heat Treatment for P-No. 4 or P-No. 5A Tube-to-Tubesheet Seal Welds Section VIII, Division 1
ASME N-594-2001 Repairs to P-4 and P-5A Materials for Pumps and Valves without Postweld Heat Treatment Section III, Division 1
ASME 2356-2001 Alternative Rules for Potweld Heat Treatment Requirements for P-No. 5A Tubes and Pipes Welded to Headers of Lower P-Number Material Section 1 (ANNULLED) (SUPP 12)

Association Francaise de Normalisation, molecular weight of p

NF EN 60641-3-2:2008 Carton comprimé et papier comprimé à usages électriques - Partie 3 : spécifications pour matériaux particuliers - Feuille 2 : exigences pour papier comprimé, types P.2.1, P.4.1, P.4.2, P.4.3 et P.6.1
NF C26-131-3-2*NF EN 60641-3-2:2008 Pressboard and presspaper for electrical purposes - Part 3 : specifications for individual materials - Sheet 2 : requirements for presspaper, types P.2.1, P.4.1, P.4.2, P.4.3 and P.6.1.
NF C26-133-2:1994 Specification for pressboard and presspaper for electrical purposes. Part 3 : specifications for individual materials. Sheet 2 : requirements for presspaper, type P.2.1, P.4.1, P.4.2, P.4.3, P.6.1 and P.7.1.
XP V03-022-4*XP ISO/TS 21569-4:2017 Horizontal methods for molecular biomarker analysis - Methods of analysis for the detection of genetically modified organisms and derived products - Part 4 : real-time PCR based screening methods for the detection of the P-nos and P-nos-nptII DNA sequence
NF EN ISO 2871-1:2010 Agents de surface - Détergents - Détermination de la teneur en matière active cationique - Partie 1 : matière active cationique à haute masse moléculaire
FD CEN/TR 17236:2020 Cigarettes électroniques et e-liquides - Composants dont la teneur est à mesurer dans l'aérosol des produits de vapotage
FD A06-325*FD CEN/TR 10353:2011 Chemical analysis of ferrous materials - Analysis of ferro-silicon - Determination of Al, Ti and P by inductively coupled plasma optical emission spectrometry
NF T73-321:1994 Surface active agents. Detergents. Determination of cationic-active matter content. Part 2 : cationic-active matter of low molecular mass (between 200 and 500).
NF EN ISO 2871-2:2010 Agents de surface - Détergents - Détermination de la teneur en matière active cationique - Partie 2 : matière active cationique à faible masse moléculaire (entre 200 et 500)
XP V03-022-5*XP ISO/TS 21569-5:2017 Horizontal methods for molecular biomarker analysis - Methods of analysis for the detection of genetically modified organisms and derived products - Part 5 : real-time PCR based screening method for the detection of the FMV promoter (P-FMV) DNA sequence
NF T73-320-2*NF EN ISO 2871-2:2010 Surface active agents - Detergents - Determination of cationic-active matter content - Part 2 : cationic-active matter of low molecular mass (between 200 and 500).
NF ISO 7927-1:2023 Épices et condiments - Graines de fenouil entières ou moulues - Partie 1 : spécifications pour les graines de fenouil amer (Foeniculum vulgare P. Miller var. vulgare)
FD CEN/TR 16269:2011 Air ambiant - Guide pour le mesurage des anions et des cations dans la fraction PM2,5
NF M60-404:1998 Determination of plutonium content in plutonium dioxide (PuO2) of nuclear grade quality. Gravimetric method.
NF T30-711:2011 Plastics - Determination of the molecular mass and molecular mass distribution of polymer species by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS).
NF T73-320-1*NF EN ISO 2871-1:2010 Surface active agents - Detergents - Determination of cationic-active matter content - Part 1 : high-molecular-mass cationic-active matter.
NF T73-320:1994 Surface active agents. Detergents. Determination of cationic-active matter content. Part 1 : high-molecular-mass cationic-active matter.
NF X34-224*NF EN 15410:2011 Solid recovered fuels - Method for the determination of the content of major elements (Al, Ca, Fe, K, Mg, Na, P, Si, Ti).
NF EN ISO 16014-5:2019 Plastiques - Détermination de la masse moléculaire moyenne et de la distribution des masses moléculaires de polymères par chromatographie d'exclusion stérique - Partie 5 : méthode par diffusion lumineuse
NF T51-240-5:2012 Plastics - Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography - Part 5 : method using light-scattering method.
NF EN 14469-2:2004 Pigments et matières de charge - Essai des matières colorantes dans le chlorure de polyvinyle plastifié (PVC-P) - Partie 2 : préparation des éprouvettes
NF C46-027-24-1*NF EN 61987-24-1:2016 Industrial-process measurement and control - Data structures and elements in process equipment catologues - Part 24-1 : lists of Properties (LOps) of positioners and I/P converters for electronic data exchange
NF C23-579-13:2011 Explosive atmospheres - Part 13 : equipment protection by pressurized rooms "p".
NF EN ISO 665:2020 Graines oléagineuses - Détermination de la teneur en eau et en matières volatiles
NF EN 4114:2010 Série aérospatiale - Colliers en "P" en alliage d'aluminium avec profilé en élastomère - Dimensions, masses
NF A08-825:1973 Analyse chimique des alliages de zinc - Dosage de l'aluminium - Méthode par absorption atomique.
NF A06-323:1987 Chemical analysis of steels. Determination of nitrogen content. Molecular absorption spectrophotometric method.
NF A08-405:1974 Analyse chimique du plomb - Dosage du bismuth - Méthode par absorption atomique (teneurs comprises entre 3 et 30 grammes par tonne)
NF A06-710:1987 Analyse chimique du cuivre et de ses alliages - Dosage du nickel - Méthode par spectrophotométrie d'absorption moléculaire.
NF A06-711:1987 Analyse chimique du cuivre et de ses alliages - Dosage du fer - Méthode par spectrophotométrie d'absorption moléculaire.

Lithuanian Standards Office , molecular weight of p

LST EN 60641-3-2-2008 Pressboard and presspaper for electrical purposes - Part 3: Specifications for individual materials - Sheet 2: Requirements for presspaper, types P.2.1, P.4.1, P.4.2, P.4.3 and P.6.1 (IEC 60641-3-2:2007)
LST EN 14469-2-2004 Pigments and extenders - Testing of colouring materials in plasticized polyvinyl chloride (PVC-P) - Part 2: Preparation of test specimens
LST EN ISO 2871-1:2010 Surface active agents - Detergents - Determination of cationic-active matter content - Part 1: High-molecular-mass cationic-active matter (ISO 2871-1:2010)
LST EN 4114-2010 Aerospace series - Clamps, loop (''P'' type) in aluminium alloy with rubber cushioning - Dimensions, masses

ES-UNE, molecular weight of p

UNE-EN 60641-3-2:2008 Specification for pressboard and presspaper for electrical purposes -- Part 3: Specifications for individual materials -- Sheet 2: Requirements for presspaper, types P.2.1, P.4.1, P.4.2, P.4.3 and P.6.1 (Endorsed by AENOR in September of 2008.)
UNE-EN ISO 16014-5:2020 Plastics - Determination of average molecular weight and molecular weight distribution of polymers using size-exclusion chromatography - Part 5: Light-scattering method (ISO 16014-5:2019)
UNE-EN 61987-24-1:2016 Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 24-1: Lists of Properties (LOPs) of positioners and I/P converters for electronic data exchange (Endorsed by AENOR in March of 2016.)

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, molecular weight of p

PREN 9120-2000 Aerospace Series Quality Systems Model for Quality Assurance Applicable to Stockist Distributors (Edition P 1; Supersedes PREN 9000-3@ Edition P 2)
PREN 4114-1998 "Aerospace Series Clamps@ Loop (""P"" Type) in Aluminium Alloy with Rubber Cushioning Dimensions@ Masses (Edition P 1)"
PREN 9120-2009 Quality Management Systems Requirements for Aviation Space and Defence Distributors (Edition P 4)
PREN 9110-2000 Aerospace Series Quality Systems Model for Quality Assurance Applicable to Maintenance Organizations (Edition P 1; Supersedes PREN 9000-2@ Edition P 2)
PREN 3909-2005 Aerospace Series Test Fluids for Electric Components and Sub-Assemblies (Edition P 2)
PREN 3909-1995 Aerospace Series Test Fluids for Electric Components and Sub-Assemblies (Edition P 1)
PREN 3841-510-1998 Aerospace Series Circuit Breakers Test Methods Part 510 : Strength of Signal Contact Terminals (Edition P 2)
PREN 3841-510-2003 Aerospace Series Circuit Breakers Test Methods Part 510: Strength of Signal Contact Terminals (Edition P 3)
PREN 3841-510-1996 Aerospace Series Circuit Breakers Test Methods Part 510 : Strength of Signal Contact Terminals (Edition P 1)
PREN 9100-2000 Aerospace Series Quality Systems Model for Quality Assurance in Design@ Development@ Production@ Installation and Servicing (Edition P 1; Supersedes PREN 9000-1@ Edition P 3)
PREN 3841-505-2003 Aerospace Series Circuit Breakers Test Methods Part 505: Strength of Main Terminals (Edition P 3)
PREN 3841-505-1996 Aerospace Series Circuit Breakers Test Methods Part 505 : Strength of Main Terminals (Edition P 1)
PREN 3841-505-1998 Aerospace Series Circuit Breakers Test Methods Part 505 : Strength of Main Terminals (Edition P 2)
PREN 9100-2016 Quality Management Systems Requirements for Aviation@ Space and Defence Organizations (Edition P 4)
PREN 9100-2009 Quality Management Systems Requirements for Aviation@ Space and Defense Organizations (Edition P 3)
PREN 9121-2003 Aerospace series Quality systems Quality system assessment spplicable to stockist distributors (Edition P 2)
PREN 4677-001-2009 Aerospace series Welded and brazed assemblies for aerospace construction Joints of metallic materials by electron beam welding Part 001: Quality of welded assemblies (Edition P 1)
PREN 3909-2014 Aerospace series Test fluids for electrical and optical components and sub-assemblies (Edition P 3)
PREN 3683-1996 Aerospace Series Test Methods Titanium Alloy Wrought Products Determination of Primary Alpha Particle Content Point Count Method and Line Intercept Method (Edition P 1)
PREN 3683-1994 Aerospace Series Test Methods Titanium Alloy Wrought Products Determination of Primary Alpha Particle Content the Point Count Method and Line Intercept Method (Edition P 1)
PREN 9137-2010 Quality management systems Guidance for the Application of AQAP 2110 within an EN 9100 Quality Management System (Edition P 1)
PREN 9121-2001 Aerospace Series Quality Systems Quality System Assessment Applicable to Stockist Distributors (Edition P 1)
PREN 9101-2009 Quality Management Systems Audit Requirements for Aviation@ Space@ and Defense Organizations (Edition P 6)
PREN 9101-2014 Quality Management Systems Audit Requirements for Aviation@ Space@ and Defence Organizations (Edition P 7)
PREN 4660-004-2018 Aerospace series - Modular and open avionics architectures - Part 004: Packaging (Edition P 2)
PREN 9110-2003 Aerospace series Quality systems Model for quality assurance applicable to maintenance organizations (Edition P 2)
PREN 9111-2001 Aerospace Series Quality Systems Quality System Assessment Applicable to Maintenance Organizations (Edition P 1)
PREN 4533-002-2016 Aerospace series Fibre optic systems Handbook Part 002: Test and measurement (Edition P 2)
PREN 4533-002-2005 Aerospace series Fibre optic systems Handbook Part 002: Test and measurement (Edition P 1)
PREN 3373-001-1996 Aerospace Series Terminal Lugs and In-Line Splices for Crimping on Electric Cables Part 001: Technical Specification (Edition P 1)
PREN 3841-509-1998 Aerospace Series Circuit Breakers Test Methods Part 509 : Insertion and Extraction Forces of Signal Contact Terminals (Edition P 2)
PREN 3841-509-1996 Aerospace Series Circuit Breakers Test Methods Part 509 : Insertion and Extraction Forces of Signal Contact Terminals (Edition P 1)
PREN 9104-001-2012 Aerospace series Quality management systems Part 001: Requirements for Aviation@ Space@ and Defence Quality Management System Certification Programs (Edition P 1)
PREN 2003-10-1997 Aerospace Series Titanium and Titanium Alloys Test Methods Part 10: Sampling for Determination of Hydrogen Content (Edition P 1)
PREN 4660-005-2018 Aerospace series - Modular and Open Avionics Architectures - Part 005: Software (Edition P 2)
PREN 4861-2018 Aerospace series Metrological assessment procedure for kinematic fields measured by digital image correlation (Edition P 1)
PREN 9000-3-1998 Aerospace Series Aerospace Industry Quality System Part 3: Requirements for Stockists-Distributors (Edition P 1)
PREN 3373-001-2006 Aerospace Series Terminal Lugs and In-Line Splices for Crimping on Electric Conductors Part 001: Technical Specification (Edition P 3)
PREN 3373-001-1999 Aerospace Series Terminal Lugs and In-Line Splices for Crimping on Electric Conductors Part 001: Technical Specification (Edition P 2)
PREN 3841-202-1996 Aerospace Series Circuit Breakers Test Methods Part 202 : Dimensions and Masses (Edition P 1)

International Electrotechnical Commission (IEC), molecular weight of p

IEC 60641-3-2:1992 Specification for pressboard and presspaper for electrical purposes; part 3: specifications for individual materials; sheet 2: requirements for presspaper, types P.2.1, P.4.1, P.4.2, P.4.3, P.6.1 and P.7.1
IEC 60641-3-2:2007 Specification for pressboard and presspaper for electrical purposes – Part 3: Specifications for individual materials – Sheet 2: Requirements for presspaper, types P.2.1, P.4.1, P.4.2, P.4.3 and P.6.1 (Edition 2.0)
IEC GUIDE 115:2021 RLV
Application of uncertainty of measurement to conformity assessment activities in the electrotechnical sector
IEC 60641-3-2:2008 Specification for pressboard and presspaper for electrical purposes - Part 3: Specifications for individual materials - Sheet 2: Requirements for presspaper, types P.2.1, P.4.1, P.4.2, P.4.3 and P.6.1
IEC 60151-21:1969 Measurements of the electrical properties of electronic tubes. Part 21 : Methods of measurement of cross-modulation in electronic tubes and valves
IEC 60151-0:1966 Precautions relating to methods of measurement of electronic tubes and valves
IEC TR 63363-1:2022
Performance of voltage sourced converter (VSC) based high-voltage direct current (HVDC) transmission - Part 1: Steady-state conditions
IEC 60151-1:1963 Measurements of the electrical properties of electronic tubes. Part 1 : Measurement of electrode current
IEC 60151-26:1971 Measurements of the electrical properties of electronic tubes. Part 26 : Methods of measurement for camera tubes
IEC 60151-17:1969 Measurements of the electrical properties of electronic tubes. Part 17 : Methods of measurement of gas filled tubes and valves
IEC 60151-13:1966 Measurements of the electrical properties of electronic tubes. Part 13 : Methods of measurement of emission current from hot cathodes for high-vacuum electronic tubes and valves
IEC 60151-7:1964 Measurements of the electrical properties of electronic tubes. Part 7 : Measurement of equivalent noise resistance
IEC 61987-24-1:2015 Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 24-1: List of Properties (LOPs) of positioners and I/P converters for electronic data e
IEC 60151-2:1963 Measurements of the electrical properties of electronic tubes. Part 2 : Measurement of heater or filament current
IEC 60151-19:1969 Measurements of the electrical properties of electronic tubes. Part 19 : Methods of measurement on corona stabilizers
IEC 60151-16:1968 Measurements of the electrical properties of electronic tubes. Part 16 : Methods of measurement for television picture tubes
IEC 60151-5:1964 Measurements of the electrical properties of electronic tubes. Part 5 : Methods of measuring hiss and hum

British Standards Institution (BSI), molecular weight of p

BS PD ISO/TS 21569-4:2016 Horizontal methods for molecular biomarker analysis. Methods of analysis for the detection of genetically modified organisms and derived products. Real-time PCR based screening methods for the detection of the P-nos and P-nos-np
BS ISO 19935-2:2020 Plastics. Temperature modulated DSC. Measurement of specific heat capacity cp
BS PD ISO/TS 21569-5:2016 Horizontal methods for molecular biomarker analysis. Methods of analysis for the detection of genetically modified organisms and derived products. Real-time PCR based screening method for the detection of the FMV promoter (P-FMV) DNA sequence
BS ISO 23420:2021 Microbeam analysis. Analytical electron microscopy. Method for the determination of energy resolution for electron energy loss spectrum analysis
BS 3727-14:1964 Methods for the analysis of nickel for use in electronic tubes and valves - Determination of tungsten (gravimetric method)
BS 3727-1:1966 Methods for the analysis of nickel for use in electronic tubes and valves - Determination of aluminium (photometric method)
BS 3727-2:1968 Methods for the analysis of nickel for use in electronic tubes and valves - Determination of boron (photometric method)
BS 3727-4:1964 Methods for the analysis of nickel for use in electronic tubes and valves - Determination of chromium (photometric method)
BS 3727-5:1964 Methods for the analysis of nickel for use in electronic tubes and valves - Determination of cobalt (photometric method)
BS 3727-6:1964 Methods for the analysis of nickel for use in electronic tubes and valves - Determination of copper (photometric method)
BS 3727-7:1964 Methods for the analysis of nickel for use in electronic tubes and valves - Determination of iron (photometric method)
BS 3727-8:1964 Methods for the analysis of nickel for use in electronic tubes and valves - Determination of manganese (photometric method)
BS 3727-9:1967 Methods for the analysis of nickel for use in electronic tubes and valves - Determination of magnesium (photometric method)
BS 3727-13:1965 Methods for the analysis of nickel for use in electronic tubes and valves - Determination of titanium (photometric method)
BS 3727-15:1968 Methods for the analysis of nickel for use in electronic tubes and valves - Determination of zinc (photometric method)
BS ISO 16014-4:2012 Plastics. Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography. High-temperature method
BS ISO 24639:2022 Microbeam analysis. Analytical electron microscopy. Calibration procedure of energy scale for elemental analysis by electron energy loss spectroscopy
20/30380369 DC BS ISO 23420. Microbeam analysis. Analytical electron microscopy. Method for the determination of energy resolution for electron energy loss spectrum analysis
PD ISO/TS 21569-5:2016 Horizontal methods for molecular biomarker analysis. Methods of analysis for the detection of genetically modified organisms and derived products. Real-time PCR based screening method for the detection of the FMV promoter (P-FMV) DNA sequence
PD ISO/TR 23173:2021 Surface chemical analysis. Electron spectroscopies. Measurement of the thickness and composition of nanoparticle coatings
BS ISO 16014-1:2012 Plastics. Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography. General principles
BS ISO 16014-3:2012 Plastics. Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography. Low-temperature method
BS 3762-3.24:1988 Analysis of formulated detergents - Quantitative test methods - Method for determination of low molecular mass alcohols content
BS 3727-21:1966 Methods for the analysis of nickel for use in electronic tubes and valves - Determination of magnesium (atomic absorption method)
BS 3727-3:1966 Methods for the analysis of nickel for use in electronic tubes and valves - Determination of carbon
BS 3727-10:1964 Methods for the analysis of nickel for use in electronic tubes and valves - Determination of silicon 0.020-0.25 per cent (photometric method)
BS 3727-11:1965 Methods for the analysis of nickel for use in electronic tubes and valves - Determination of silicon 0.001-0.020 per cent (photometric method)
BS ISO 16564:2004 Rubber, raw natural - Determination of average molecular mass and molecular-mass distribution by size exclusion chromatography (SEC)
BS EN ISO 16014-5:2012 Plastics. Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography. Method using light-scattering detection
DD CEN/TS 15410:2006 Solid recovered fuels — Method for the determination of the content of major elements (Al, Ca, Fe, K, Mg, Na, P, Si, Ti)
21/30404763 DC BS ISO 24639. Microbeam analysis. Analytical electron microscopy. Calibration procedure of energy scale for elemental analysis by electron energy loss spectroscopy
BS ISO 16014-4:2019 Tracked Changes. Plastics. Determination of average molecular weight and molecular weight distribution of polymers using size-exclusion chromatography. High-temperature method
BS ISO 16014-3:2019 Tracked Changes. Plastics. Determination of average molecular weight and molecular weight distribution of polymers using size-exclusion chromatography. Low-temperature method
BS ISO 16014-1:2019 Tracked Changes. Plastics. Determination of average molecular weight and molecular weight distribution of polymers using size-exclusion chromatography. General principles
BS EN ISO 16014-5:2019 Tracked Changes. Plastics. Determination of average molecular weight and molecular weight distribution of polymers using size-exclusion chromatography. Light-scattering method
BS 3727-12:1970 Methods for the analysis of nickel for use in electronic tubes and valves - Determination of sulphur (combustion method)
PD IEC TR 62899-402-4:2021 Printed electronics. Printability. Measurement of qualities. Classification and measurement methods for morphology

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., molecular weight of p

ASHRAE DA-07-049-2007 Comparative Analysis of CFD Delta P vs. Measured Delta P for Compressed Flexible Ducts

Professional Standard - Geology, molecular weight of p

DZ/T 0064.71-2021 Groundwater quality analysis method part 71: α-666, β-666, γ-666, δ-666, hexachlorobenzene, P, P′-dideyi, P, P′- Determination of DDD, O,P'-DDT and P,P'-DDT by Gas Chromatography

国家食品药品监督管理局, molecular weight of p

YY/T 1518-2017 C-peptide (CP) quantitative labeling immunoassay kit

Group Standards of the People's Republic of China, molecular weight of p

T/SZBX 057-2021 MBP-P-nuclear power (non asphalt based) polymer self-adhesive membrane waterproofing sheets
T/AGIA 001-2021 Standard for seed quality grading of American ginseng
T/SAIA 002-2021 Standard for seed quality grading of Bupleurum chinense
T/CSTM 00197-2021 Graphene quantum dots — Determination of relative fluorescence quantum efficiency for the blue emission — Molecular fluorescence spectroscopy

International Organization for Standardization (ISO), molecular weight of p

ISO/TS 21569-4:2016 Horizontal methods for molecular biomarker analysis - Methods of analysis for the detection of genetically modified organisms and derived products - Part 4: Real-time PCR based screening methods for the detection of the P-nos and P-nos-nptII DNA sequences
ISO 23420:2021 Microbeam analysis — Analytical electron microscopy — Method for the determination of energy resolution for electron energy loss spectrum analysis
ISO/TS 21569-5:2016 Horizontal methods for molecular biomarker analysis - Methods of analysis for the detection of genetically modified organisms and derived products - Part 5: Real-time PCR based screening method for the detection of the FMV promoter (P-FMV) DNA sequence
ISO 2871-1:2010 Surface active agents - Detergents - Determination of cationic-active matter content - Part 1: High-molecular-mass cationic-active matter
ISO 2871-1:1988 Surface active agents; detergents; determination of cationic-active matter content; part 1: high-molecular-mass cationic-active matter
ISO 16014-1:2012 Plastics - Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography - Part 1: General principles
ISO 7557:1988 Rape (colza) seeds with low erucic acid content; specification
ISO 16014-4:2019 Plastics — Determination of average molecular weight and molecular weight distribution of polymers using size-exclusion chromatography — Part 4: High-temperature method
ISO 16014-3:2019 Plastics — Determination of average molecular weight and molecular weight distribution of polymers using size-exclusion chromatography — Part 3: Low-temperature method
ISO 2871-2:2010 Surface active agents - Detergents - Determination of cationic-active matter content - Part 2: Cationic-active matter of low molecular mass (between 200 and 500)
ISO 2871-2:1990 Surface active agents; detergents; determination of cationic-active matter content; part 2: cationic active matter of low molecular mass (between 200 and 500)
ISO/TS 22933:2022 Surface chemical analysis — Secondary ion mass spectrometry — Method for the measurement of mass resolution in SIMS
ISO 16014-1:2019 Plastics — Determination of average molecular weight and molecular weight distribution of polymers using size-exclusion chromatography — Part 1: General principles
ISO 16014-5:2019 Plastics — Determination of average molecular weight and molecular weight distribution of polymers using size-exclusion chromatography — Part 5: Light-scattering method
ISO/TS 21383:2021 Microbeam analysis - Scanning electron microscopy - Qualification of the scanning electron microscope for quantitative measurements
ISO 31-8:1973 Title missing - Legacy paper document
ISO 31-8:1980 Quantities and units of physical chemistry and molecular physics
ISO 16014-3:2003 Plastics - Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography - Part 3: Low-temperature method
ISO 16014-3:2012 Plastics - Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography - Part 3: Low-temperature method
ISO 16564:2004 Rubber, raw natural - Determination of average molecular mass and molecular-mass distribution by size exclusion chromatography (SEC)
ISO 16014-1:2003 Plastics — Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography — Part 1: General principles
ISO 16014-2:2019 Plastics — Determination of average molecular weight and molecular weight distribution of polymers using size-exclusion chromatography — Part 2: Universal calibration method
ISO 24639:2022 Microbeam analysis — Analytical electron microscopy — Calibration procedure of energy scale for elemental analysis by electron energy loss spectroscopy
ISO 6464:1983 Animal and vegetable fats and oils; Determination of gallates content; Molecular absorption spectrometric method
ISO 8769-2:1996 Reference sources for the calibration of surface contamination monitors - Part 2: Electrons of energy less than 0,15 MeV and photons of energy less than 1,5 MeV
ISO 16014-5:2012 Plastics - Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography - Part 5: Method using light-scattering detection

Alliance of Telecommunications Industry Solutions （ATIS), molecular weight of p

ATIS 0500018-2014 p-ANI Allocation Tables for ESQKs, ESRKs, and ESRDs

ATIS - Alliance for Telecommunications Industry Solutions, molecular weight of p

0500018-2014 p-ANI Allocation Tables for ESQKs@ ESRKs@ and ESRDs
0500018-2009 p-ANI Allocation Tables for ESQKs@ ESRKs@ and ESRDs

PT-IPQ, molecular weight of p

NP 3093/2-1985

IT-UNI, molecular weight of p

ET-QSAE, molecular weight of p

ES 478-2000

Chongqing Provincial Standard of the People's Republic of China, molecular weight of p

DB50/T 1328-2022 Gardenia seed quality grading
DB50/T 205-2005 Classification of forest tree seed quality
DB50/T 602-2015 Coptis chinensis seed quality grading
DB50/T 596-2015 Quality Grading of Scrophulariae Scrophulariae Buds
DB50/T 655-2015 Artemisia annua seed quality grading
DB50/T 1224-2022 Salvia seed quality grading
DB50/T 1232-2022 Platycodon grandiflorum seed quality grading
DB50/T 1326-2022 Quality Grading of Woody Seeds
DB50/T 644-2015 Quality Grading of Asparagus Seeds
DB50/T 645-2015 Seed quality classification of Taibai Fritillaria

Professional Standard - Commodity Inspection, molecular weight of p

SN/T 3002-2011 Determication of relative molecular weight and molecular weight distribution of polyethylene.Gel permeation chromatography method
SN/T 4183-2015 Determination of relative molecular weight and molecular weight distribution of polyolefins.High temperature gel permeation chromatography method

American Society for Testing and Materials (ASTM), molecular weight of p

ASTM D2502-04(2009) Standard Test Method for Estimation of Molecular Weight (Relative Molecular Mass) of Petroleum Oils From Viscosity Measurements
ASTM D2502-92(1996) Standard Test Method for Estimation of Molecular Weight (Relative Molecular Mass) of Petroleum Oils From Viscosity Measurements
ASTM D2502-12 adjunct(2020) Standard Test Method for Estimation of Molecular Weight (Relative Molecular Mass) of Petroleum Oils From Viscosity Measurements
ASTM D2502-04 Standard Test Method for Estimation of Molecular Weight (Relative Molecular Mass) of Petroleum Oils From Viscosity Measurements
ASTM D2502-92(2002) Standard Test Method for Estimation of Molecular Weight (Relative Molecular Mass) of Petroleum Oils From Viscosity Measurements
ASTM E261-98 Standard Practice for Determining Neutron Fluence, Fluence Rate, and Spectra by Radioactivation Techniques
ASTM D2503-92(2002)e1 Standard Test Method for Relative Molecular Mass (Molecular Weight) of Hydrocarbons by Thermoelectric Measurement of Vapor Pressure
ASTM D2503-92(2007) Standard Test Method for Relative Molecular Mass (Molecular Weight) of Hydrocarbons by Thermoelectric Measurement of Vapor Pressure
ASTM D2503-92(2012) Standard Test Method for Relative Molecular Mass (Molecular Weight) of Hydrocarbons by Thermoelectric Measurement of Vapor Pressure
ASTM D2503-92(1997) Standard Test Method for Relative Molecular Mass (Molecular Weight) of Hydrocarbons by Thermoelectric Measurement of Vapor Pressure
ASTM D2503-92(2016) Standard Test Method for Relative Molecular Mass (Molecular Weight) of Hydrocarbons by Thermoelectric Measurement of Vapor Pressure
ASTM D4001-93(2006) Standard Test Method for Determination of Weight-Average Molecular Weight of Polymers By Light Scattering
ASTM D4001-13 Standard Test Method for Determination of Weight-Average Molecular Weight of Polymers By Light Scattering
ASTM UOP375-86 Calculation of UOP Characterization Factor and Estimation of Molecular Weight of Petroleum Oils
ASTM D6579-11(2020) Standard Practice for Molecular Weight Averages and Molecular Weight Distribution of Hydrocarbon, Rosin and Terpene Resins by Size-Exclusion Chromatography
ASTM D2503-82(1987)e1 Standard Test Method for Molecular Weight (Relative Molecular Mass) of Hydrocarbons by Thermoelectric Measurement of Vapor Pressure
ASTM E261-03 Standard Practice for Determining Neutron Fluence, Fluence Rate, and Spectra by Radioactivation Techniques
ASTM D6474-99 Standard Test Method for Determining Molecular Weight Distribution and Molecular Weight Averages of Polyolefins by High Temperature Gel Permeation Chromatography
ASTM D6474-99(2006) Standard Test Method for Determining Molecular Weight Distribution and Molecular Weight Averages of Polyolefins by High Temperature Gel Permeation Chromatography
ASTM E261-15 Standard Practice for Determining Neutron Fluence, Fluence Rate, and Spectra by Radioactivation Techniques
ASTM D6474-19 Standard Test Method for Determining Molecular Weight Distribution and Molecular Weight Averages of Polyolefins by High Temperature Gel Permeation Chromatography
ASTM D6474-20 Standard Test Method for Determining Molecular Weight Distribution and Molecular Weight Averages of Polyolefins by High Temperature Gel Permeation Chromatography
ASTM D5675-13 Standard Classification for Low Molecular Weight PTFE and FEP Micronized Powders
ASTM D6579-00 Standard Practice for Molecular Weight Averages and Molecular Weight Distribution of Hydrocarbon and Terpene Resins by Size-Exclusion Chromatography
ASTM D6474-12 Standard Test Method for Determining Molecular Weight Distribution and Molecular Weight Averages of Polyolefins by High Temperature Gel Permeation Chromatography
ASTM D3973-85(2003) Standard Test Method for Low-Molecular Weight Halogenated Hydrocarbons in Water
ASTM UOP434-83 Free Water and Volatile Hydrocarbon Content of Molecular Sieves
ASTM D5296-05 Standard Test Method for Molecular Weight Averages and Molecular Weight Distribution of Polystyrene by High Performance Size-Exclusion Chromatography
ASTM D5296-97 Standard Test Method for Molecular Weight Averages and Molecular Weight Distribution of Polystyrene by High Performance Size-Exclusion Chromatography
ASTM D5296-19 Standard Test Method for Molecular Weight Averages and Molecular Weight Distribution of Polystyrene by High Performance Size-Exclusion Chromatography
ASTM D5675-13(2018) Standard Classification for Low Molecular Weight PTFE and FEP Micronized Powders
ASTM D5675-13(2023) Standard Classification for Low Molecular Weight PTFE and FEP Micronized Powders
ASTM D5296-11 Standard Test Method for Molecular Weight Averages and Molecular Weight Distribution of Polystyrene by High Performance Size-Exclusion Chromatography
ASTM D6579-06 Standard Practice for Molecular Weight Averages and Molecular Weight Distribution of Hydrocarbon and Terpene Resins by Size-Exclusion Chromatography
ASTM D6579-11 Standard Practice for Molecular Weight Averages and Molecular Weight Distribution of Hydrocarbon, Rosin and Terpene Resins by Size-Exclusion Chromatography

European Association of Aerospace Industries, molecular weight of p

AECMA PREN 2903-1998 Aerospace Series Clamps Worm Drive Dimensions - Masses Issue P 2 [Refer To: ASD-STAN PREN 4234]
AECMA PREN 2904-1998 Aerospace Series Clamps - Saddle in Aluminium Alloy Dimensions - Masses Issue P 2 [Refer To: ASD-STAN PREN 3730]
AECMA PREN 2901-1998 Aerospace Series Clamps, Loop (<
> Type) with Rubber Cushioning in Corrosion Resisting Steel Dimensions - Masses Issue P 2 [Refer To: ASD-STAN PREN 4113]
AECMA PREN 2902-1998 Aerospace Series Clamps, Loop (<
> Type) with Rubber Cushioning in Aluminium Alloy Dimensions - Masses Issue P 1 [Refer To: ASD-STAN PREN 4114]
AECMA PREN 4533-002-2005 Aerospace series Fibre optic systems Handbook Part 002: Test and measurement Edition P 1
AECMA PREN 3909-2005 Aerospace Series Test Fluids for Electric Components and Sub-Assemblies Edition P 2

Universal Oil Products Company (UOP), molecular weight of p

UOP 375-2007 CALCULATION OF UOP CHARACTERIZATION FACTOR AND ESTIMATION OF MOLECULAR WEIGHT OF PETROLEUM OILS

Indonesia Standards, molecular weight of p

SNI 19-4177-1996 Specification of sieves for size measurement of grains
SNI 01-7138-2005 The quality of teakwood (Tectona grandis Linn f.) seeds
SNI 03-3962-1995 Test method for light sediment grain distribution gravimetrically by sieves

Military Standard of the People's Republic of China-General Armament Department, molecular weight of p

GJB 1965-1994 Determination of molecular weight and molecular weight distribution of hydroxyl-terminated polybutadiene by gel permeation chromatography

CZ-CSN, molecular weight of p

CSN EN 50 016-1993 Electrical apparatus for potentially explosive atmospheres. Pressurized apparatus "p"
CSN 79 5606 Z1-1998
CSN 35 6506-1983 Electronic measuring instruments Documentation supplied with electronic measuring
CSN 64 0902-1988 Determination of moisture content of ion exchange resins
CSN 80 0523-1974 Man-made fibres.Determination of pre-paralion contenl and low-moleeular parl on man-made fibres

(U.S.) Joint Electron Device Engineering Council Soild State Technology Association, molecular weight of p

JEDEC JESD60A-2004 A Procedure for Measuring P-Channel MOSFET Hot-Carrier- Induced Degradation Under DC Stress
JEDEC JESD90-2004 A Procedure for Measuring P-Channel MOSFET Negative Bias Temperature Instabilities

HU-MSZT, molecular weight of p

Japanese Industrial Standards Committee (JISC), molecular weight of p

JIS K 3850:1995 Measuring method for airborne fibrous particles
JIS K 7252-1:2008 Plastics -- Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography -- Part 1: General principles
JIS K 7252-1:2016 Plastics -- Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography -- Part 1: General principles
JIS K 7252-5:2016 Plastics -- Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography -- Part 5: Method using light-scattering detection

RU-GOST R, molecular weight of p

GOST R 54352-2011 Food common salt. Determination of a mass fraction of magnesium-ion and calcium-ion by complexonometric method
GOST R 54353-2011 Food common salt. Determination of sulphate-ion mass fraction by gravimetric method
GOST 33418-2015 Testing of chemicals of environmental hazard. Determination of the Number-Average Molecular Weight and the Molecular Weight Distribution of Polymers using Gel Permeation Chromatography
GOST R 57060-2016 Copper. Measurement of impurities mass fraction in copper by an inductively coupled plasma atomic emission spectrometry method
GOST R 25645.159-1994 Sporadic electron fluxes in near-earth space. Model of spatial-time and energy distribution

American National Standards Institute （ANSI), molecular weight of p

ANSI/ASTM D5296:1997 Molecular Weight Averages and Molecular Weight Distribution of Polystyrene by High Performance Size-Exclusion Chromatography, Test Method of (08.03)
ANSI/ASTM D6474:1999 Test Method for Determining Molecular Weight Distribution and Molecular Weight Averages of Polyolefins by High Temperature Gel Permeation Chromatography

TN-INNORPI, molecular weight of p

NT 14.36-1983

国家药监局, molecular weight of p

YY/T 1795-2021 sperm quality analyzer
YY/T 1678-2019 Method for detecting molecular weight and molecular weight distribution of polylactic acid and its copolymers for surgical implants

ZA-SANS, molecular weight of p

SANS 5789:1974 Capacity of cups
SANS 163-2:1995 Water quality - Determination of dissolved anions by liquid chromatography of ions Part 2: Determination of bromide, chloride, nitrate, nitrite, orthophosphate and sulfate in waste water

国家市场监督管理总局、中国国家标准化管理委员会, molecular weight of p

GB/T 36214.1-2018 Plastics—Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography—Part 1:General principles
GB/T 36214.3-2018 Plastics—Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography—Part 3:Low-temperature method
GB/T 36214.5-2018 Plastics—Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography—Part5:Method using light-scattering detection
GB/T 17360-2020 Microbeam analysis—Method of quantitative determination for low contents of silicon and manganese in steels using electron probe microanalyzer
GB/T 27896-2018 Test method for water vapor content of natural gas—Electronic moisture analyzers

TH-TISI, molecular weight of p

TIS 1762.1-1999 Surface active agents.detergents.determination of cationic-active matter content.part 1: high-molecular-mass cationic-active matter
TIS 1762.2-1999 Surface active agents.detergents.determination of cationic-active matter content.part 2 : cationic-active matter of low molecular mass (between 200 and 500)
TIS 2250.3-2005 Plastics.determination of average molecular mass and molecular mass distribution of polymers using size.exclusion chromatography.part 3: low.temperature method
TIS 2250.4-2005 Plastics.determination of average molecular mass and molecular mass distribution of polymers using size.exclusion chromatography.part 4: high.temperature method
TIS 2250.1-2005 Plastics.determination of average molecular mass and molecular mass distribution of polymers using size.exclusion chromatography.part 1: general principles
TIS 2250.2-2005 Plastics.determination of average molecular mass and molecular mass distribution of polymers using size.exclusion chromatography.part 2: universal calibration method

European Committee for Standardization (CEN), molecular weight of p

EN ISO 2871-1:2010 Surface active agents - Detergents - Determination of cationic-active matter content - Part 1: High-molecular-mass cationic-active matter
PD CEN/TR 10353:2011 Chemical analysis of ferrous materials - Analysis of ferro-silicon - Determination of Al, Ti and P by inductively coupled plasma optical emission spectrometry
EN 10351:2011 Chemical analysis of ferrous materials - Inductively coupled plasma optical emission spectrometric analysis of unalloyed and low alloyed steels - Determination of Mn, P, Cu, Ni, Cr, Mo, V, Co, Al (total) and Sn [Routine method]
EN ISO 665:1995 Oilseeds - Determination of Moisture and Volatile Matter Content (ISO 665 : 1977)
EN ISO 665:2020 Oilseeds - Determination of moisture and volatile matter content (ISO 665:2020)
EN ISO 16014-5:2019 Plastics - Determination of average molecular weight and molecular weight distribution of polymers using size-exclusion chromatography - Part 5: Light-scattering method (ISO 16014-5:2019)
EN ISO 16014-5:2012 Plastics - Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography - Part 5: Method using light-scattering detection

AENOR, molecular weight of p

UNE 104306:2000 Synthetic materials. Determination of plasticizing content for PVC-P sheets used in waterproofing.
UNE-EN 14469-2:2004 Pigments and extenders - Testing of colouring materials in plasticized polyvinyl chloride (PVC-P) - Part 2: Preparation of test specimens
UNE 40228-5:1974 DETERMINATION OF ASH CONTENT IN SUBSAMPLES OF WASHED WOOL.
UNE-EN ISO 2871-1:2010 Surface active agents - Detergents - Determination of cationic-active matter content - Part 1: High-molecular-mass cationic-active matter (ISO 2871-1:2010)

Aerospace, Security and Defence Industries Association of Europe (ASD), molecular weight of p

ASD-STAN PREN 9100-2016 Quality Management Systems Requirements for Aviation@ Space and Defence Organizations (Edition P 4)
ASD-STAN PREN 3909-2014 Aerospace series Test fluids for electrical and optical components and sub-assemblies (Edition P 3)
ASD-STAN PREN 4533-002-2016 Aerospace series Fibre optic systems Handbook Part 002: Test and measurement (Edition P 2)

US-CFR-file, molecular weight of p

CFR 40-98.166-2013 Protection of environment. Part98:Mandatory greenhouse gas reporting. Subpart P:Hydrogen production. Section98.166:Data reporting requirements
CFR 40-98.167-2013 Protection of environment. Part98:Mandatory greenhouse gas reporting. Subpart P:Hydrogen production. Section98.167:Records that must be retained.
CFR 40-98.164-2013 Protection of environment. Part98:Mandatory greenhouse gas reporting. Subpart P:Hydrogen production. Section98.164:Monitoring and QA/QC requirements.

VN-TCVN, molecular weight of p

TCVN 6855-16-2001 Measurements of the electrical properties of electronic tubes and valves.Part 16: Methods of measurement of television picture tubes

BE-NBN, molecular weight of p

NBN-EN ISO 2871-1:1995
NBN I-879-1968
NBN X 02-108-1989 Quantifies and units of physical chemistry and molecular physics

API - American Petroleum Institute, molecular weight of p

API SYNTHESIS-46-1946 THE SYNTHESIS AND PROPERTIES OF HYDROCARBONS OF HIGH MOLECULAR WEIGHT-IV

Professional Standard - Chemical Industry, molecular weight of p

HG/T 4787-2014 Middle molecular polyisobutylene

Professional Standard - Agriculture, molecular weight of p

GB 7908-1989 Forest tree seed quality classification

Society of Automotive Engineers (SAE), molecular weight of p

SAE AMS3728-2011 EPOXY CRESOL NOVOLAC RESIN Low Molecular Weight
SAE AIR6966-2020 Conducting Measurement Systems Analysis for Rotor Balancing Tasks

Inner Mongolia Provincial Standard of the People's Republic of China, molecular weight of p

DB15/T 1655-2019 Radix Paeoniae Rubra Seed Quality Grading
DB15/T 1297-2017 Platycodon grandiflorum seed quality grading
DB15/T 1299-2017 Seabuckthorn Seed Quality Grading
DB15/T 2181-2021 Isatis indica seed quality grading
DB15/T 2175-2021 Scutellaria baicalensis seed quality grading
DB15/T 2180-2021 Scopolamine seed quality grading
DB15/T 2204-2021 Parsnips Seed Quality Grading
DB15/T 2648-2022 Sophora flavescens seed quality classification
DB15/T 2650-2022 Perilla seed quality grading
DB15/T 1658-2019 Cistanche seed quality classification
DB15/T 1296-2017 Seed quality classification of Bupleurum chinensis
DB15/T 2173-2021 Atractylodes atractylodes seed quality classification
DB15/T 2179-2021 Bluethorn Seed Quality Grading
DB15/T 1656-2019 Seed quality classification of Adenophora japonicus
DB1501/T 0027-2022 Grading of Allium Seed Quality
DB15/T 2652-2022 Elecampane seed quality grading
DB15/T 1298-2017 Seed Quality Grading of Astragalus mongolica

Qinghai Provincial Standard of the People's Republic of China, molecular weight of p

DB63/T 1061-2012 Laywort seed quality grading
DB63/T 1062-2012 Quality Grading of Thoreau Grass Seeds

Shandong Provincial Standard of the People's Republic of China, molecular weight of p

DB37/T 176-1993 Forest tree seed quality classification
DB3710/T 191-2023 American ginseng seed quality classification

Hunan Provincial Standard of the People's Republic of China, molecular weight of p

DB43/T 926-2014 Liquidambar Seed Quality Grading
DB43/T 1608-2019 Seed quality classification of Pine massoniana based on fineness

Shanxi Provincial Standard of the People's Republic of China, molecular weight of p

DB14/T 137-2018 Forest tree seed quality classification

Liaoning Provincial Standard of the People's Republic of China, molecular weight of p

DB21/T 1290-2004 Forest tree seed quality grading

Professional Standard - Nuclear Industry, molecular weight of p

EJ/T 349.4-1998 Determination of micro Uranium and Thorium in rocks spectrophotometry by extraction chromatographic simultaneous separation with P-adsorbed resin

Professional Standard - Machinery, molecular weight of p

JB/T 50047-1999 Measuring tools, measuring instruments, product quality grading, electronic plug gauges
JB/T 54283-1999 Measuring tools Measuring instruments Product quality grading Electronic digital calipers

Professional Standard - Aviation, molecular weight of p

HB 6731.2-1993 Determination of Magnesium Content in Aluminum Alloys by Atomic Absorption Spectrometry

Professional Standard - Petrochemical Industry, molecular weight of p

SH/T 0730-2004 Estimation of molecular weigh (relative molecular mass) of petroleum oils from viscosity measurements
SH/T 0108-1992 Determination of average molecular weight and molecular weight distribution of certain polymeric additives (Size Exclusion Chromatography)

Sichuan Provincial Standard of the People's Republic of China, molecular weight of p

DB51/T 2522-2018 Inspection Technology and Quality Grading of Indigo indigo Seeds

农业农村部, molecular weight of p

NY/T 3252.2-2018 Industrial Hemp Seeds Part 2: Seed Quality

BR-ABNT, molecular weight of p

ABNT TB-19 Pt.4-1979

GOSTR, molecular weight of p

GOST 25565-1988 Electronic measuring devices documentation supplied with electronic measuring devices

Xinjiang Provincial Standard of the People's Republic of China, molecular weight of p

DB65/T 3010-2009 Quality grading of the princes.feather(Amaranthus hypochondriacus L.)seeds
DB65/T 3009-2009 Quality grading of the Chinese ephedra(EphedraL.)seeds

ETSI - European Telecommunications Standards Institute, molecular weight of p

GS QKD 002-2010 Quantum Key Distribution; Use Cases (V1.1.1)
GR QKD 007-2018 Quantum Key Distribution (QKD); Vocabulary (V1.1.1)

Guangxi Provincial Standard of the People's Republic of China, molecular weight of p

DB45/T 1728-2018 Grass coral seed quality classification

Hebei Provincial Standard of the People's Republic of China, molecular weight of p

DB13/T 614-2005 Seedling quality grading Pinus sylvestris

ES-AENOR, molecular weight of p

ICEA - Insulated Cable Engineers Association Inc., molecular weight of p

P-54-440-1991 Ampacities of Cables in Open-Top Cable Trays (See WC 51@ which is based upon ICEA P-54-440)

YU-JUS, molecular weight of p

JUS H.P8.088-1988 Testing of pesticides. DDT, technical. Determination of melting point of separatedfp-p'- DDT
JUS H.E8.029-1992 Non-ionic surface active agents. Determination of sulfated ash. Gravimetric method

未注明发布机构, molecular weight of p

BS 3762-3.24:1988(2011) Analysis of formulated detergents — Part 3 : Quantitative test methods — Section 3.24 Methods for determination of low molecular mass alcohols content
BS ISO 16564:2004(2006) Rubber, raw natural — Determination of averagemolecularmass and molecular - mass distribution by size exclusion chromatography (SEC)

European Committee for Electrotechnical Standardization（CENELEC）, molecular weight of p

EN 61987-24-1:2016 Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 24-1: Lists of Properties (LOPs) of positioners and I/P converters for electronic data exchange

国家技术监督局, molecular weight of p

GB/T 3102.8-1993 Quantities and units of physical chemistry and molecular physics

US-CLSI, molecular weight of p

CLSI MM20-A-2012 Quality Management for Molecular Genetic Testing; Approved Guideline

RO-ASRO, molecular weight of p

STAS 6123/1-1973 SEEDS FOR AGRIGULTURE Determinai ion of the mass of 1000 grains
STAS SR 6124-1-1999 Agricultural seeds Determination of moisture

ITU-T - International Telecommunication Union/ITU Telcommunication Sector, molecular weight of p

ITU-T P.501-2000 Test Signals for Use in Telephonometry - Series P: Telephone Transmission Quality@ Local Line Networks Objective Measuring Apparatus

中华人民共和国国家卫生和计划生育委员会, molecular weight of p

GBZ/T 148-2002 Personal dose monitoring method with CR39 neutron dosimeter for neutron logging

Professional Standard - Light Industry, molecular weight of p

QB/T 2668.2-2017 Ultra-high-molecular-weight polyethylene (PE-UHMW) pipe fittings
QB/T 2668-2004 Ultra-high-molecular-weight polyethylene (PE-UHMW) pipes
QB/T 2668.1-2017 Ultra-high-molecular-weight polyethylene (PE-UHMW) pipes

Professional Standard - Textile, molecular weight of p

FZ/T 63028-2015 Ultra-high molecular weight polyethylene netting twine
FZ/T 54027-2010 Ultra-high molecular weight polyethylene (UHMWPE) filament yarns
FZ/T 54027-2022 UHMWPE Filament

GM North America, molecular weight of p

GM GMP.POM.012-1989 Acetal - High Molecular Weight Copolymer
GM GMP.PE.050-1991 Polyethylene - High Density, High Molecular Weight
GM GMP.PE.062-2001 Polyethylene - High Density, High Molecular Weight

Ningxia Provincial Standard of the People's Republic of China, molecular weight of p

DB64/T 1182-2016 Quality classification of main forest tree seeds

Henan Provincial Standard of the People's Republic of China, molecular weight of p

DB41/T 893-2014 UHMWPE sheet

工业和信息化部, molecular weight of p

YD/T 3907.3-2021 Key devices and modules for quantum key distribution (QKD) based on BB84 protocol Part 3: Quantum Random Number Generator (QRNG)

Gansu Provincial Standard of the People's Republic of China, molecular weight of p

DB62/T 2421.1-2015 Key Grass Seed Quality Part 1 Ornamental Grass Seeds
DB62/T 2421.3-2015 Key Grass Seed Quality Part 3 Leguminous Grass Seeds
DB62/T 2421.4-2015 Key Grass Seed Quality Part 4 Polygonaceae Grass Seeds
DB62/T 2421.1-2018 Key Grass Seed Quality Part 1 Ornamental Grass Seeds
DB62/T 2421.3-2018 Key Grass Seed Quality Part 3 Leguminous Grass Seeds

Standard Association of Australia （SAA）, molecular weight of p

AS 2292.2:1987 Methods for the analysis of solders - Determination of silver, bismuth, cadmium, copper, antimony, iron and zinc - Flame atomic absorption spectrometric method