ZH
RU
ES

Laboratory comparison test plan

Laboratory comparison test plan, Total:499 items.

In the international standard classification, Laboratory comparison test plan involves: Quality, Veterinary medicine, ENVIRONMENT. HEALTH PROTECTION. SAFETY, Wastes, Environmental protection, Mechanical testing, Soil quality. Pedology, Civil engineering in general, Farming and forestry, Earthworks. Excavations. Foundation construction. Underground works, Test conditions and procedures in general, Water quality, Protection against fire, Continuous handling equipment, Wood technology processes, Insulating materials, Analytical chemistry, Sensory analysis, Fertilizers, Pulps, Fuels, Road engineering, Earth-moving machinery, Pipeline components and pipelines, Kitchen equipment, Surface treatment and coating, Microbiology, Products of the chemical industry, Fishing and fish breeding, Pharmaceutics, Power stations in general, Refractories, Metrology and measurement in general, Rubber, Coals, Air quality, Refrigerating technology, Wood, sawlogs and sawn timber, Corrosion of metals, Products of the textile industry, Education, Tyres, Construction materials, Paints and varnishes, Aerospace fluid systems and components, Medical sciences and health care facilities in general, Petroleum products in general, Acoustics and acoustic measurements, Reinforced plastics, Environmental testing, Solar energy engineering, Equipment for entertainment, Organic chemicals, Textile fibres, Sterilization and disinfection, Ventilators. Fans. Air-conditioners, Agricultural machines, implements and equipment, Biology. Botany. Zoology, Footwear, Photography, Measurement of volume, mass, density, viscosity, Waxes, bituminous materials and other petroleum products, Protective equipment, Adhesives, Road vehicles in general, Paint coating processes, Structures of buildings, Ergonomics, Ferrous metals, Paint ingredients, Electrical wires and cables, Measurement of force, weight and pressure, Plastics, Construction industry, Lubricants, industrial oils and related products, Protection of and in buildings.

International Organization for Standardization (ISO), Laboratory comparison test plan

ISO/IEC Guide 43-2:1997 Proficiency testing by interlaboratory comparisons - Part 2: Selection and use of proficiency testing schemes by laboratory accreditation bodies
ISO/IEC Guide 43-1:1997 Proficiency testing by interlaboratory comparisons - Part 1: Development and operation of proficiency testing schemes
ISO 13528:2005 Statistical methods for use in proficiency testing by interlaboratory comparisons
ISO 13528:2015 Statistical methods for use in proficiency testing by interlaboratory comparison
ISO 340:2004 Conveyor belts - Laboratory scale flammability characteristics - Requirements and test method
ISO/TS 20612:2007 Water quality - Interlaboratory comparisons for proficiency testing of analytical chemistry laboratories
ISO 13528:2022 Statistical methods for use in proficiency testing by interlaboratory comparison
ISO/TS 24498:2022 Paper, board and pulps — Estimation of uncertainty for test methods by interlaboratory comparisons
ISO 3471:2008/AWI Amd 1 Earth-moving machinery — Roll-over protective structures — Laboratory tests and performance requirements — Amendment 1
ISO/TR 19867-3:2018 Clean cookstoves and clean cooking solutions - Harmonized laboratory test protocols - Part 3: Voluntary performance targets for cookstoves based on laboratory testing
ISO 5725:1986 Precision of test methods; Determination of repeatability and reproducibility for a standard test method by inter-laboratory tests
ISO 5495:2005 Sensory analysis - Methodology - Paired comparison test
ISO 5495:1983 Sensory analysis; Methodology; Paired comparison test
ISO 718:1982 Laboratory glassware — Methods for thermal shock tests
ISO 1775:1975 Porcelain laboratory apparatus; Requirements and methods of test
ISO 3696:1987 Water for analytical laboratory use; Specification and test methods
ISO/TS 22117:2010 Microbiology of food and animal feeding stuffs - Specific requirements and guidance for proficiency testing by interlaboratory comparison
ISO 10399:2004 Sensory analysis - Methodology - Duo-trio test
ISO 10399:2017 Sensory analysis - Methodology - Duo-trio test
ISO 10399:1991 Sensory analysis; methodology; duo-trio test
ISO 3675:1998/AWI Amd 1 Crude petroleum and liquid petroleum products — Laboratory determination of density — Hydrometer method — Amendment 1
ISO 16140-4:2020/DAmd 1 Microbiology of the food chain — Method validation — Part 4: Protocol for method validation in a single laboratory — Amendment 1: Validation of a larger test portion size for qualitative methods
ISO 3675:1976 Crude petroleum and liquid petroleum products — Laboratory determination of density or relative density — Hydrometer method
ISO 11613:1999 Protective clothing for firefighters - Laboratory test methods and performance requirements
ISO 10191:2021 Passenger car tyres — Verifying tyre capabilities — Laboratory test methods
ISO/CD TR 20659-1:2023 Rheological test methods — Fundamentals and interlaboratory comparisons — Part 1: Determination of the yield point
ISO/DTR 20659-1:2023 Rheological test methods — Fundamentals and interlaboratory comparisons — Part 1: Determination of the yield point
ISO/PRF TS 7013 Water quality — Guidance and requirements for designing an interlaboratory trial for validation of analytical methods
ISO 5495:2005/Amd 1:2016 Sensory analysis — Methodology — Paired comparison test — Amendment 1
ISO 5725:1981 Precision of test methods — Determination of repeatability and reproducibility by inter-laboratory tests

TH-TISI, Laboratory comparison test plan

TIS 5043.1-1997 Proficiency testing by interlaboratory comparisons.part 1: development and operation of proficiency testing schemes
TIS 5043.2-1997 Proficiency testing by interlaboratory comparisons.part 2: selection and use of proficiency testing schemes by laboratory accreditation bodies

Korean Agency for Technology and Standards (KATS), Laboratory comparison test plan

KS A ISO/IEC GUIDE 43-2-2002(2012) Proficiency testing by interlaboratory comparisons－Part 2：Selection and use of proficiency testing schemes by laboratory accreditation bodies
KS A ISO/IEC GUIDE 43-1-2002(2012) Proficiency testing by interlaboratory comparisons－Part 1：Development and operation of proficiency testing schemes by laboratory accreditation bodies
KS Q ISO 13528:2009 Statistical methods for use in proficiency testing by interlaboratory comparisons
KS A ISO/IEC GUIDE 43-2:2002 Proficiency testing by interlaboratory comparisons-Part 2:Selection and use of proficiency testing schemes by laboratory accreditation bodies
KS A ISO/IEC GUIDE 43-2:2013 Proficiency testing by interlaboratory comparisons－Part 2：Selection and use of proficiency testing schemes by laboratory accreditation bodies
KS I ISO TS 20612:2019 Water quality — Interlaboratory comparisons for proficiency testing of analytical chemistry laboratories
KS I ISO 20612:2009 Water quality－Interlaboratory comparisons for proficiency testing of analytical chemistry laboratories
KS F 2312-2022 Test method for soil compaction in laboratory
KS F 2312-1986 Test method for soil compaction in laboratory
KS Q ISO 13528-2017(2022) Statistical methods for use in proficiency testing by interlaboratory comparisons
KS F 2494-2017 Standard test method of the laboratory permeability test for
KS F 2494-2017(2022) Standard test method of the laboratory permeability test for
KS Q ISO 13528:2017 Statistical methods for use in proficiency testing by interlaboratory comparisons
KS Q ISO 5495:2009 Sensory analysis-Methodology-Paired comparison test
KS Q ISO 5495-2009(2019) Sensory analysis－Methodology－Paired comparison test
KS M ISO 3696:2010 Water for analytical laboratory use-Specification and test methods
KS M ISO 3696-2010(2020) Water for analytical laboratory use－Specification and test methods
KS M ISO 10191-2012(2017) Passenger car tyres－Verifying tyre capabilities－Laboratory test methods
KS A ISO/IEC GUIDE 43-1:2002 Proficiency testing by interlaboratory comparisons-Part 1:Development and operation of proficiency testing schemes by laboratory accreditation bodies
KS A ISO/IEC GUIDE 43-1:2013 Proficiency testing by interlaboratory comparisons－Part 1：Development and operation of proficiency testing schemes by laboratory accreditation bodies
KS Q ISO 10399:2009 Sensory analysis－Methodology－Duo-trio test
KS F 2425-2017 Method of making test sample of concrete in laboratory
KS F 2425-1981 Method of making test sample of concrete in laboratory
KS M ISO 10191-2012(2022) Passenger car tyres－Verifying tyre capabilities－Laboratory test methods
KS D 0235-2015 Laboratory test method of sacrificial anodes for cathodic protection
KS P 2094-2020 Protocol for measurement procedures comparison and bias estimation using patient samples in in-vitro diagnostic medical laboratory
KS P 1975-2018 Protocol for evaluation of precision performance of the quantitative test in in-vitro diagnostic medical laboratory
KS F 2329-2007(2017) Testing method for making curing of soil－cement compression and flexure test specimens in the laboratory
KS F 2329-1982 Testing method for making curing of soil－cement compression and flexure test specimens in the laboratory
KS F 2353-2010(2022) Standard test method for specific bulk gravity of compacted asphalt mixtures
KS F 2353-1985 Standard test method for specific bulk gravity of compacted asphalt mixtures
KS D 0294-2009 Standard method for the evaluation of repassivation rate of stainless steel components using laboratory scratch test
KS K ISO 11613:2019 Protective clothing for firefighter's who are engaged in support activities associated with structural fire fighting — Laboratory test methods and performance
KS F 2425-2002 Method of making test sample of concrete in laboratory
KS P 2069-2020 Protocol for evaluation of detection capability for measurement procedures in in-vitro diagnostic medical laboratory
KS F 2329-2007 Testing method for making curing of soil－cement compression and flexure test specimens in the laboratory
KS F 2329-2007(2022) Testing method for making curing of soil－cement compression and flexure test specimens in the laboratory
KS K ISO 11613:2008 Protective clothing for firefighters-Laboratory test methods and performance requirements
KS F ISO 3471:2003 Earth-moving machinery-Roll-over protective structures-Laboratory tests and performance requirements
KS K ISO 15383-2008(2018) Protective gloves for firefighters－Laboratory test methods and performance requirements
KS M ISO 10454-2007(2022) Truck and bus tyres－Verifying tyre capabilities－Laboratory test methods
KS D 0235-2015(2020) Laboratory test method of sacrificial anodes for cathodic protection

Taiwan Provincial Standard of the People's Republic of China, Laboratory comparison test plan

CNS 15009-2006 Proficiency testing by interlaboratory comparisons

RU-GOST R, Laboratory comparison test plan

GOST R ISO 13528-2010 Statistical methods. Using in proficiency testing by interlaboratory comparison tests
GOST R 50779.60-2017 Statistical methods for use in proficiency testing by interlaboratory comparison
GOST ISO/TS 22117-2013 Microbiology of food and animal feeding stuffs. Specific requirements and guidance for proficiency testing by interlaboratory comparison
GOST ISO 10399-2015 Organoleptic analysis. Methodology. Duo-trio test
GOST R 59597-2021 Soils. Laboratory method for triaxial test of frozen soils
GOST R 8.692-2009 State system for ensuring the uniformity of measurements. Requirements for the competence of providers of proficiency testing for test laboratories by interlaboratory comparisons
GOST 29225-1991 Porcelain laboratory apparatus. Requirements and methods of test
GOST R 56698-2015 Methods of testing the chemicals of human hazard. Reproductive toxicity studies on two generations of laboratory animals
GOST 10742-1971 Brown coals, hard coals, anthracite, combustible shales and coal briquettes. Methods of sampling and preparation of samples for laboratory tests
GOST ISO 340-2014 Conveyor belts. Laboratory scale flammability characteristics. Requirements and test method

Shandong Provincial Standard of the People's Republic of China, Laboratory comparison test plan

DB37/T 4003-2020 Neutralization test and ELISA test comparison laboratory evaluation standard

API - American Petroleum Institute, Laboratory comparison test plan

API REPORT 83-50-1985 Interlaboratory and Intralaboratory Comparision of the API Drilling Fluids Bioassay Protocol

Association Francaise de Normalisation, Laboratory comparison test plan

NF X06-510*NF ISO 13528:2015 Statistical methods for use in proficiency testing by interlaboratory comparison
NF X06-510:2005 Statistical methods for use in proficiency testing by interlaboratory comparisons.
NF X15-202:2006 Laboratory furniture - Storage units for laboratories - Requirements and test methods.
NF ISO 13528:2022 Méthodes statistiques utilisées dans les essais d'aptitude par comparaison interlaboratoires
NF X15-204:1986 Laboratory equipment. Benches. Test methods.
NF X15-205:1986 Laboratory equipment. Furnitures. Test methods.
NF X50-061:2000 General requirements for the competence of testing and calibration laboratories.
NF B35-801:1972 Laboratory glassware. Porcelain laboratory apparatus. Quality and methods of test.
NF EN ISO 22117:2019 Microbiologie de la chaîne alimentaire - Exigences spécifiques et recommandations relatives aux essais d'aptitude par comparaison interlaboratoires
NF V09-020:2010 Sensory analysis - Methodology - Duo-trio test.
NF V09-012*NF EN ISO 5495:2007 Sensory analysis - Methodology - Paired comparison test
NF V09-012:1983 Sensory analysis. Methodology. Paired comparison test.
NF V09-012/A1*NF EN ISO 5495/A1:2016 Sensory analysis - Methodology - Paired comparison test
NF G35-054-2/A1*NF EN ISO 11378-2/A1:2017 Textile floor coverings - Laboratory soiling tests - Part 2 : drum test - Amendment 1
NF B35-511:1983 Laboratory glassware. Density hydrometers for general purpose. Specifications. Test methods and use.
NF R12-755:2010 Passenger car tyres - Verifying tyre capabilities - Laboratory test methods.
NF B30-109*NF ISO 718:1986 Laboratory glassware. Methods for thermal shock tests.
NF V08-304*NF EN ISO 22117:2019 Microbiology of the food chain - Specific requirements and guidance for proficiency testing by interlaboratory comparison
NF ISO 718:1986 Verre - Verrerie de laboratoire. Méthodes d'essai de choc thermique.
NF ISO 10191:2021 Pneumatiques pour voitures particulières - Vérification de l'aptitude des pneumatiques - Méthodes d'essai en laboratoire
NF P98-818-32/IN1:2007 Bituminous mixtures - Test methods for hot mix asphalt - Part 32 : laboratory compaction of bituminous mixtures by vibratory compactor.
NF P98-818-32:2007 Bituminous mixtures - Test methods for hot mix asphalt - Part 32 : laboratory compaction of bituminous mixtures by vibratory compactor.
NF P98-818-35*NF EN 12697-35:2017 Bituminous mixtures - Test methods - Part 35 : Laboratory mixing
NF R12-755*NF ISO 10191:2021 Passenger car tyres - Verifying tyre capabilities - Laboratory test methods
FD A06-002*FD CEN/TR 10345:2014 Guideline for statistical data treatment of inter laboratory tests for validation of analytical methods
NF V09-020:1992 Sensory analysis. Methodology. Duo-trio test.
NF EN ISO 3471:2008 Engins de terrassement - Structures de protection au retournement - Essais de laboratoire et exigences de performance

Professional Standard - Certification and Accreditation, Laboratory comparison test plan

RB/T 208-2016 Internal quality control of chemical laboratory.Comparison test

Sichuan Provincial Standard of the People's Republic of China, Laboratory comparison test plan

DB51/T 2170-2016 Guidelines for Organizational Interlaboratory Comparisons

Danish Standards Foundation, Laboratory comparison test plan

DS/ISO 13528:2005 Statistical methods for use in proficiency testing by interlaboratory comparisons
DS/EN 16101:2013 Water quality - Guidance standard on interlaboratory comparison studies for ecological assessment
DS/EN 14727:2006 Laboratory furniture - Storage units for laboratories - Requirements and test methods
DS/ISO 5725:1982 Precision of test methods. Determination of repeatability and reproducibility by interlaboratory tests
DS/EN ISO 5495:2007 Sensory analysis - Methodology - Paired comparison test
DS/CEN/TS 14793:2007 Stationary source emission - Intralaboratory validation procedure for an alternative method compared to a reference method
DS/CEN ISO/TS 22117:2011 Microbiology of food and animal feeding stuffs – Specific requirements and guidance for proficiency testing by interlaboratory comparison
DS 1126.7:1985 Joints in building. Laboratory method of test for air permeability of joints
DS/ISO 17892-12:2021 Geotechnical investigation and testing – Laboratory testing of soil – Part 12: Determination of liquid and plastic limits – Amendment 1
DS/EN ISO 3696:1996 Water for analytical laboratory use - Specification and test methods
DS/CEN/TR 10345:2008 Guideline for statistical data treatment of inter laboratory tests for validation of analytical methods

ZA-SANS, Laboratory comparison test plan

SANS 13528:2009 Statistical methods for use in proficiency testing by interlaboratory comparisons
SANS 3696:1987 Water for analytical laboratory use - Specification and test methods
SANS 17025:2005 General requirements for the competence of testing and calibration laboratories
SANS 340:2006 Conveyor belts - Laboratory scale flammability characteristics - Requirements and test method

Professional Standard - Machinery, Laboratory comparison test plan

JB/T 8537-1997 Laboratory test method of dust specific electric resistance
JB/T 8537-2010 Testing method for dust resistivity in lab
JB/T 8537-2023 Testing method for dust resistivity in laboratory
JB/T 7901-1999 Metals materials - Uniform corrosion - Methods of laboratory immersion testing

Group Standards of the People's Republic of China, Laboratory comparison test plan

T/CAMA 74-2022 Guide for the implementation of interlaboratory comparison of agricultural machinery testing parameter
T/FDSA 022-2021 Food inspection and testing-General requirements for interlaboratory comparison
T/SCETIA 1001-2021 Specification for inter-laboratory comparison of construction engineering testing
T/CSCP 0035.8-2017 Laboratory Corrosion Tests on Low Alloy Structural Steels Part 8: Full Immersion Test Method for Laboratory Uniform Corrosion of Low Alloy Structural Steels
T/CSCP 0035.14-2017 Laboratory corrosion tests on low alloy structural steels - Part 14: Laboratory corrosion fatigue test methods on low alloy steels
T/CSCP 0035.1-2017 Laboratory Corrosion Tests on Low Alloy Structural Steels Part 1: General Principles of Test Methods
T/CSAE 104-2019 Xenon arc lamp aging test method for automotive exterior coating laboratory
T/CIQA 10-2020 Technical requirements and test methods for ceramic worktop of laboratory furniture

国家市场监督管理总局、中国国家标准化管理委员会, Laboratory comparison test plan

GB/T 28043-2019 Statistical methods for use in proficiency testing by interlaboratory comparison
GB/T 36167-2018 Method for coal preparation laboratory timed-release flotation analysis
GB/T 16422.1-2019 Plastics—Methods of exposure to laboratory light sources—Part 1:General guidance

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Laboratory comparison test plan

GB/T 28043-2011 Statistical methods for use in proficiency testing by interlaboratory comparisons
GB/T 15483.2-1999 Proficiency testing by interlaboratory comparisons--Part 2: Selection and use of proficiency testing schemes by laboratory accreditation bodies
GB/T 18260-2015 Method of laboratory test for toxicity of wood preservatives against termites
GB/T 18260-2000 Laboratory test method for wood preservatives of determining the protective effectiveness of preservatives against termits
GB/T 15483.1-1999 Proficiency testing by interlaboratory comparisons--Part 1: Development and operation of proficiency testing schemes
GB 6579-1986 Laboratory glassware－Methods for thermal shock test
GB/T 4757-2001 Methods for the batch flotation testing of fine coal
GB/T 6579-1986 Laboratory glassware--Methods for thermal shock test
GB/T 6682-1992 Water for analytical laboratory use--Specification and test methods
GB/T 4757-2013 Methods for the batch flotation testing of fine coal
GB/T 6682-2008 Water for analytical laboratory use.Specification and test methods
GB/T 13942.1-1992 Method for laboratory test of natural decay resistance of woods
GB/T 21747-2008 Educational laboratory equipment.Safety requirements and test methods for laboratory workbenches
GB/T 11259-1999 Standard practice for fabrication and control of steel reference blocks used in ultrasonic inspection
GB/T 24573-2009 Fire resistance tests for vault and file room doors
GB/T 15727-1995 Methods for thermal shock test of laboratory apparatus glass(stick method)
GB/T 12682-1990 Test method for comparing colour stabilities of colour photographic images
GB/T 6099.1-1985 Test method for maturity of cotton fibres--Lumen and wall thickness constract method
GB/T 5441.8-1985 Test methods for communication cable--Test for frequency characteristic of attenuation coefficient of coaxial pair--Comparison method
GB/T 16422.1-1996 Plastics--Methods of exposure to laboratory light sources. Part 1: General guidance
GB/T 16422.1-2006 Plastics. Methods of the exposure to laboratory light sources. Part 1: General guidance

Japanese Industrial Standards Committee (JISC), Laboratory comparison test plan

JIS A 1211:2009 Test methods for the California Bearing Ratio (CBR) of soils in laboratory
JIS Q 0043-2:1998 Proficiency testing by interlaboratory comparisons -- Part 2: Selection and use of proficiency testing schemes by laboratory accreditation bodies
JIS Q 0043-1:1998 Proficiency testing by interlaboratory comparisons -- Part 1: Development and operation of proficiency testing schemes
JIS A 1211:1998 Test methods for the California bearing ratio (CBR) of soils in laboratory
JIS Z 8405:2021 Statistical methods for use in proficiency testing by interlaboratory comparison
JIS Z 8405:2008 Statistical methods for use in proficiency testing by interlaboratory comparisons
JIS A 1138:2005 Method of making test sample of concrete in laboratory
JIS A 1138:2018 Method of making test sample of concrete in laboratory

German Institute for Standardization, Laboratory comparison test plan

DIN V 55394-2:2000 Proficiency testing by interlaboratory comparisons - Part 2: Selection and use of proficiency testing schemes by laboratory accreditation bodies (ISO/IEC Guide 43-2:1997)
DIN ISO 13528:2009 Statistical methods for use in proficiency testing by interlaboratory comparisons (ISO 13528:2005); Text in German and English
DIN V 55394-1:2000 Proficiency testing by interlaboratory comparisons - Part 1: Development and operation of proficiency testing schemes (ISO/IEC Guide 43-1:1997)
DIN 10954:1997 Sensory testing methods - Paired comparison test
DIN ISO 13528:2020 Statistical methods for use in proficiency testing by interlaboratory comparison (ISO 13528:2015, Corrected version 2016-10-15); Text in German and English
DIN ISO 13528:2020-09 Statistical methods for use in proficiency testing by interlaboratory comparison (ISO 13528:2015, Corrected version 2016-10-15); Text in German and English
DIN 12791-3:1983-06 Laboratory glassware; density hydrometers; use and test methods
DIN 12791-3:1983 Laboratory glassware; density hydrometers; use and test methods
DIN EN ISO 22117:2019-08 Microbiology of the food chain - Specific requirements and guidance for proficiency testing by interlaboratory comparison (ISO 22117:2019); German version EN ISO 22117:2019
DIN 38402-45:2014 German standard methods for the examination of water, waste water and sludge - General information (group A) - Part 45: Interlaboratory comparisons for proficiency testing of laboratories (A 45)
DIN 38402-45:2003 German standard methods for the examination of water, waste water and sludge - General information (group A) - Part 45: Interlaboratory comparisons for proficiency testing of laboratories (A 45)
DIN EN ISO 5495:2007 Sensory analysis - Methodology - Paired comparison test (ISO 5495:2005 and ISO 5495:2005/Cor 1:2006) English version of DIN EN ISO 5495:2007-10
DIN 12851:1974 Laboratory porcelain; requirements, methods of test
DIN EN 14727:2006 Laboratory furniture - Storage units for laboratories - Requirements and test methods; English version of DIN EN 14727:2006-03
DIN EN 12697-32:2017 Bituminous mixtures - Test methods - Part 32: Laboratory compaction of bituminous mixtures by vibratory compactor; German and English version prEN 12697-32:2017
DIN EN 13150:2001 Workbenches for laboratories - Safety requirements and test methods; German version EN 13150:2001
DIN 38402-45:2014-06 German standard methods for the examination of water, waste water and sludge - General information (group A) - Part 45: Interlaboratory comparisons for proficiency testing of laboratories (A 45)
DIN EN 17886:2022-08 Laboratory test method - Assessment of the susceptibility of thermal insulation products to mould growth; German and English version prEN 17886:2022 / Note: Date of issue 2022-07-08
DIN EN 12697-32:2007 Bituminous mixtures - Test methods for hot mix asphalt - Part 32: Laboratory compaction of bituminous mixtures by vibratory compactor (includes Amendment A1:2007); English version of DIN EN 12697-32:2007-11
DIN 58956-3:1986-12 Medical microbiology; medical microbiological laboratories; requirements for the organization scheme
DIN EN 17542-1:2022 Earthworks - Geotechnical laboratory tests - Part 1: Degradability test standard
DIN EN ISO 340:2007 Conveyor belts - Laboratory scale flammability characteristics - Requirements and test method (ISO 340:2004); English version of DIN EN ISO 340:2007-06
DIN EN 12697-35:2016-10 Bituminous mixtures - Test methods - Part 35: Laboratory mixing; German version EN 12697-35:2016
DIN EN ISO 22117:2019 Microbiology of the food chain - Specific requirements and guidance for proficiency testing by interlaboratory comparison (ISO 22117:2019)
DIN ISO/TS 17892-3:2005 Geotechnical investigation and testing - Laboratory testing of soil - Part 3: Determination of particle density, Pycnometer method (ISO/TS 17892-3:2004); German version CEN ISO/TS 17892-3:2004

海关总署, Laboratory comparison test plan

SN/T 5557-2022 Implementation Guidelines for Inter-laboratory Comparisons in the Field of Phytosanitary

American Society for Testing and Materials (ASTM), Laboratory comparison test plan

ASTM D1883-21 Standard Test Method for California Bearing Ratio (CBR) of Laboratory-Compacted Soils
ASTM D1883-16 Standard Test Method for California Bearing Ratio (CBR) of Laboratory-Compacted Soils
ASTM E1301-95e1 Standard Guide for Proficiency Testing by Interlaboratory Comparisons
ASTM E1301-95(2003) Standard Guide for Proficiency Testing by Interlaboratory Comparisons
ASTM E2554-07 Standard Practice for Estimating and Monitoring the Uncertainty of Test Results of a Test Method in a Single Laboratory Using a Control Sample Program
ASTM D1883-05 Standard Test Method for CBR (California Bearing Ratio) of Laboratory-Compacted Soils
ASTM D1883-99 Standard Test Method for CBR (California Bearing Ratio) of Laboratory-Compacted Soils
ASTM D1883-07e1 Standard Test Method for CBR (California Bearing Ratio) of Laboratory-Compacted Soils
ASTM D1883-14 Standard Test Method for California Bearing Ratio (CBR) of Laboratory-Compacted Soils
ASTM D1883-07e2 Standard Test Method for CBR (California Bearing Ratio) of Laboratory-Compacted Soils
ASTM D5374-93(1999) Standard Test Methods for Forced-Convection Laboratory Ovens for Evaluation of Electrical Insulation
ASTM D4427-23 Standard Classification of Peat Samples by Laboratory Testing
ASTM D5374-93(2005) Standard Test Methods for Forced-Convection Laboratory Ovens for Evaluation of Electrical Insulation
ASTM D5374-22a Standard Test Methods for Forced-Convection Laboratory Ovens for Evaluation of Electrical Insulation
ASTM D5452-20 Standard Test Method for Particulate Contamination in Aviation Fuels by Laboratory Filtration
ASTM F2634-15(2021) Standard Test Method for Laboratory Testing of Polyethylene (PE) Butt Fusion Joints using Tensile-Impact Method
ASTM D5374-22 Standard Test Methods for Forced-Convection Laboratory Ovens for Evaluation of Electrical Insulation
ASTM D5374-13 Standard Test Methods for Forced-Convection Laboratory Ovens for Evaluation of Electrical Insulation
ASTM D5009-02(2005) Standard Test Method for Evaluating and Comparing Transfer Efficiency of Spray Applied Coatings Under Laboratory Conditions
ASTM D5009-02 Standard Test Method for Evaluating and Comparing Transfer Efficiency of Spray Applied Coatings Under Laboratory Conditions
ASTM D5009-96(2002) Standard Test Method for Evaluating and Comparing Transfer Efficiency of Spray Applied Coatings Under Laboratory Conditions
ASTM D5009-96 Standard Test Method for Evaluating and Comparing Transfer Efficiency of Spray Applied Coatings Under Laboratory Conditions
ASTM D3345-17 Standard Test Method for Laboratory Evaluation of Solid Wood for Resistance to Termites
ASTM D8282-19 Standard Practice for Laboratory Test Method Validation and Method Development
ASTM E132-04(2010) Standard Test Method for Poisson's Ratio at Room Temperature
ASTM D5009-02(2011) Standard Test Method for Evaluating and Comparing Transfer Efficiency of Spray Applied Coatings Under Laboratory Conditions
ASTM D5009-02(2017) Standard Test Method for Evaluating and Comparing Transfer Efficiency of Spray Applied Coatings Under Laboratory Conditions
ASTM C604-02(2012) Standard Test Method for True Specific Gravity of Refractory Materials by Gas-Comparison Pycnometer
ASTM C793-23 Standard Test Method for Effects of Laboratory Accelerated Weathering on Elastomeric Joint Sealants
ASTM E132-04 Standard Test Method for Poisson''s Ratio at Room Temperature
ASTM E132-97 Standard Test Method for Poisson''s Ratio at Room Temperature
ASTM E2480-07 Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method with Multi-Valued Measurands
ASTM D4855-97 Standard Practice for Comparing Test Methods
ASTM D4855-97(2002) Standard Practice for Comparing Test Methods
ASTM D969-85(2003)e1 Standard Test Method for Laboratory Determination of Degree of Bleeding of Traffic Paint
ASTM D969-85(1998) Standard Test Method for Laboratory Determination of Degree of Bleeding of Traffic Paint
ASTM D96-73(1984) Laboratory test method for degree of bleeding of road marking paint
ASTM D96-88(1998) Laboratory test method for degree of bleeding of road marking paint
ASTM D2168-02 Standard Test Methods for Calibration of Laboratory Mechanical-Rammer Soil Compactors
ASTM D2168-02a Standard Test Methods for Calibration of Laboratory Mechanical-Rammer Soil Compactors
ASTM D2168-90(1996)e1 Standard Test Methods for Calibration of Laboratory Mechanical-Rammer Soil Compactors
ASTM D216-77(1982) Standard test method for calibration of laboratory mechanical earth compactors
ASTM E596-96(2002) Standard Test Method for Laboratory Measurement of Noise Reduction of Sound-Isolating Enclosures
ASTM E596-96(2002)e1 Standard Test Method for Laboratory Measurement of Noise Reduction of Sound-Isolating Enclosures
ASTM E596-96(2009) Standard Test Method for Laboratory Measurement of Noise Reduction of Sound-Isolating Enclosures
ASTM C481-99 Standard Test Method for Laboratory Aging of Sandwich Constructions
ASTM C481-99(2005) Standard Test Method for Laboratory Aging of Sandwich Constructions
ASTM D4697-95 Standard Guide for Maintaining Test Methods in the User's Laboratory
ASTM C481-99(2011) Standard Test Method for Laboratory Aging of Sandwich Constructions
ASTM C481-99(2016) Standard Test Method for Laboratory Aging of Sandwich Constructions
ASTM D5744-12 Standard Test Method for Laboratory Weathering of Solid Materials Using a Humidity Cell
ASTM D2168-10 Standard Test Methods for Calibration of Laboratory Mechanical-Rammer Soil Compactors
ASTM D4427-07 Standard Classification of Peat Samples by Laboratory Testing
ASTM E903-96 Standard Test Method for Solar Absorptance, Reflectance, and Transmittance of Materials Using Integrating Spheres
ASTM E951-94 Standard Test Methods for Laboratory Testing of Non-Commercial Mosquito Repellent Formulations On the Skin
ASTM E2480-12 Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method with Multi-Valued Measurands
ASTM F3351-19 Standard Test Method for Playground Surface Impact Testing in Laboratory at Specified Test Height
ASTM F3351-19e1 Standard Test Method for Playground Surface Impact Testing in Laboratory at Specified Test Height
ASTM F2634-15 Standard Test Method for Laboratory Testing of Polyethylene (PE) Butt Fusion Joints using Tensile-Impact Method
ASTM D584-96(2005) Standard Test Method for Wool Content of Raw Wool-Laboratory Scale
ASTM D584-96 Standard Test Method for Wool Content of Raw Wool-Laboratory Scale
ASTM E596-96(2016) Standard Test Method for Laboratory Measurement of Noise Reduction of Sound-Isolating Enclosures
ASTM D2017-05 Standard Test Method of Accelerated Laboratory Test of Natural Decay Resistance of Woods
ASTM D2017-81(1994)e1 Standard Test Method for Accelerated Laboratory Test of Natural Decay Resistance of Woods
ASTM D5009-02(2023) Standard Test Method for Evaluating and Comparing Transfer Efficiency of Spray Applied Coatings Under Laboratory Conditions
ASTM D5744-13 Standard Test Method for Laboratory Weathering of Solid Materials Using a Humidity Cell
ASTM D5744-13e1 Standard Test Method for Laboratory Weathering of Solid Materials Using a Humidity Cell
ASTM D4427-92(2002)e1 Standard Classification of Peat Samples by Laboratory Testing
ASTM D4427-13 Standard Classification of Peat Samples by Laboratory Testing
ASTM E132-17 Standard Test Method for Poisson’s Ratio at Room Temperature
ASTM D1217-12 Standard Test Method for Density and Relative Density (Specific Gravity) of Liquids by Bingham Pycnometer
ASTM E691-21 Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
ASTM E691-22 Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
ASTM D167-12 Standard Test Method for Apparent and True Specific Gravity and Porosity of Lump Coke
ASTM D4697-95(2001) Standard Guide for Maintaining Test Methods in the User's Laboratory
ASTM D1183-96e1 Standard Test Methods for Resistance of Adhesives to Cyclic Laboratory Aging Conditions
ASTM D3801-96e1 Standard Test Method for Measuring the Comparative Burning Characteristics of Solid Plastics in a Vertical Position
ASTM C802-96(2002) Standard Practice for Conducting an Interlaboratory Test Program to Determine the Precision of Test Methods for Construction Materials
ASTM C802-96 Standard Practice for Conducting an Interlaboratory Test Program to Determine the Precision of Test Methods for Construction Materials
ASTM C802-96(2008)e1 Standard Practice for Conducting an Interlaboratory Test Program to Determine the Precision of Test Methods for Construction Materials
ASTM C802-09 Standard Practice for Conducting an Interlaboratory Test Program to Determine the Precision of Test Methods for Construction Materials
ASTM C802-09a Standard Practice for Conducting an Interlaboratory Test Program to Determine the Precision of Test Methods for Construction Materials
ASTM C802-14 Standard Practice for Conducting an Interlaboratory Test Program to Determine the Precision of Test Methods for Construction Materials
ASTM D1217-93(2007) Standard Test Method for Density and Relative Density (Specific Gravity) of Liquids by Bingham Pycnometer
ASTM D4575-09(2019) Standard Test Methods for Rubber Deterioration—Reference and Alternative Method(s) for Determining Ozone Level in Laboratory Test Chambers
ASTM F1763-96 Standard Test Methods for Measuring Contrast of a Linear Polarizer
ASTM E898-88(2000) Standard Method of Testing Top-Loading, Direct-Reading Laboratory Scales and Balances
ASTM E898-88(2013) Standard Test Method of Testing Top-Loading, Direct-Reading Laboratory Scales and Balances
ASTM D7401-08 Standard Test Methods for Laboratory Determination of Rock Anchor Capacities by Pull and Drop Tests
ASTM D5114-90(2010) Standard Test Method for Laboratory Froth Flotation of Coal in a Mechanical Cell
ASTM D1749-93(1997) Standard Practice for Interlaboratory Evaluation of Test Methods Used with Paper and Paper Products
ASTM D5188-04 Standard Test Method for Vapor-Liquid Ratio Temperature Determination of Fuels (Evacuated Chamber Method)
ASTM D5188-04a Standard Test Method for Vapor-Liquid Ratio Temperature Determination of Fuels (Evacuated Chamber Method)
ASTM E2653-08 Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Fire Test Method with Fewer Than Six Participating Laboratories
ASTM E2653-23 Standard Practice for Conducting an Interlaboratory Study to Determine Precision Estimates for a Test Method with Fewer Than Six Participating Laboratories
ASTM D868-85(1998) Standard Test Method for Evaluating Degree of Bleeding of Traffic Paint
ASTM E596-22 Standard Test Method for Laboratory Measurement of Noise Reduction of Sound-Isolating Enclosures
ASTM D7847-22 Standard Guide for Interlaboratory Studies for Microbiological Test Methods
ASTM D969-85(2003) Standard Test Method for Laboratory Determination of Degree of Bleeding of Traffic Paint
ASTM D7847-12e1 Standard Guide for Interlaboratory Studies for Microbiological Test Methods
ASTM C802-14(2022) Standard Practice for Conducting an Interlaboratory Test Program to Determine the Precision of Test Methods for Construction Materials

American National Standards Institute （ANSI), Laboratory comparison test plan

ANSI/ASTM E2554:2013 Practice for Estimating and Monitoring the Uncertainty of Test Results of a Test Method in a Single Laboratory Using a Control Sample Program
ANSI/ASTM E132:1997 Test Method for Poisson's Ratio at Room Temperature
ANSI/ASTM D5374:1999 Test Methods for Forced-Convection Laboratory Ovens for Evaluation of Electrical Insulation
ANSI/AMCA 520-2009 Laboratory Methods of Testing Actuators
ANSI/AMCA 500-L-2015 Laboratory Methods of Testing Louvers for Rating
ANSI/ASTM D2017:1996 Test Method for Accelerated Laboratory Test of Natural Decay Resistance of Woods
ANSI/AMCA 230-2012 Laboratory Methods of Testing Air Circulating Fans for Rating and Certification
ANSI/ASTM F1833:1997 Test Method for Comparison of Rearfoot Motion Control Properties of Running
ANSI/ASHRAE 130-2016 Laboratory Methods of Testing Air Terminal Units
ANSI/ASTM E2653a:2009 Practice for Conducting an Interlaboratory Study to Determine the Precision of a Fire Test Method with Fewer than Six Participating Laboratories
ANSI/ASTM E691:2013 PRACTICE FOR CONDUCTING AN INTERLABORATORY STUDY TO DETERMINE THE PRECISION OF A TEST METHOD
ANSI/AMCA 301-1990 Methods for Calculating Fan Sound Ratings from Laboratory Test Data
ANSI/ASHRAE 51-2001 Laboratory Methods of Testing Fans for Aerodynamic Performance Rating

British Standards Institution (BSI), Laboratory comparison test plan

BS ISO 13528:2015 Statistical methods for use in proficiency testing by interlaboratory comparison
BS ISO 13528:2005 Statistical methods for use in proficiency testing by interlaboratory comparisons
BS EN 14727:2005 Laboratory furniture - Storage units for laboratories - Requirements and test methods
BS EN 14727:2006 Laboratory furniture. Storage units for laboratories. Requirements and test methods
BS ISO 13528:2022 Statistical methods for use in proficiency testing by interlaboratory comparison
BS EN ISO 10399:2004 Sensory analysis. Methodology. Duo-trio test
BS EN ISO 10399:2010 Sensory analysis - Methodology - Duo-trio test
BS EN ISO 5495:2006 Sensory analysis. Methodology. Paired comparison test
BS EN 16101:2012 Water quality. Guidance standard on interlaboratory comparison studies for ecological assessment
BS EN ISO 3696:1987 Water for analytical laboratory use - Specification and test methods
BS EN ISO/IEC 15423:2010 Water for analytical laboratory use - Specification and test methods
BS EN ISO 3696:1995 Water for analytical laboratory use - Specification and test methods
BS 3517:1991 Methods for thermal shock tests on laboratory glassware
BS DD CEN ISO/TS 22117:2010 Microbiology of food and animal feeding stuffs. Specific requirements and guidance for proficiency testing by interlaboratory comparison
BS 7530-1:1992 Methods for froth flotation testing of hard coal - Laboratory procedure
BS EN ISO 22117:2019 Tracked Changes. Microbiology of the food chain. Specific requirements and guidance for proficiency testing by interlaboratory comparison
BS 6401:1983 Method for measurement, in the laboratory, of the specific optical density of smoke generated by materials
BS 2646-5:1993 Autoclaves for sterilization in laboratories. Methods of test for function and performance
BS EN 12697-32:2003 Bituminous mixtures — Test methods for hot mix asphalt — Part 32: Laboratory compaction of bituminous mixtures by vibratory compactor
BS EN ISO 12944-6:1998 Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Laboratory performance test methods
BS 3483-A1:1983 Methods for testing pigments for paints - Comparison of colour
BS EN 13205-4:2014 Workplace exposure. Assessment of sampler performance for measurement of airborne particle concentrations. Laboratory performance test based on comparison of concentrations
BS ISO 27327-2:2014 Fans. Air curtain units. Laboratory methods of testing for sound power
22/30455532 DC BS EN 17886. Laboratory test method. assessment of the susceptibility of thermal insulation products to mould growth

KR-KS, Laboratory comparison test plan

KS I ISO TS 20612-2019 Water quality — Interlaboratory comparisons for proficiency testing of analytical chemistry laboratories
KS Q ISO 13528-2017 Statistical methods for use in proficiency testing by interlaboratory comparisons
KS B ISO 5696-2016 Trailed agricultural vehicles－Brakes and braking devices－Laboratory test method
KS K ISO 11613-2019 Protective clothing for firefighter's who are engaged in support activities associated with structural fire fighting — Laboratory test methods and performance

Professional Standard - Agriculture, Laboratory comparison test plan

CNAS-CL01-S02-2022 "Energy Star" Laboratory Accreditation Program
GB 6682-1992 Analytical laboratory water specifications and test methods
第3．1章OIE陆生动物诊断试验和疫苗手册-第七版 General guidelines - Laboratory methods for bacterial susceptibility testing
水产品质量安全检验手册 1.5.1.0-2005 Chapter 1 General Introduction Section 5 Laboratory Inspection and Analysis Basis 1. Analytical Laboratory Water Specifications and Test Methods (GB 6682-1992)

Standard Association of Australia （SAA）, Laboratory comparison test plan

HB 18.43.2-1998 Guidelines for third-party certification and accreditation - Guide 43 - Proficiency testing by interlaboratory comparisons - Part 2: Selection and use of proficiency testing schemes by laboratory accreditation bodies
AS 2542.2.4:2005 Sensory analysis - Specific methods - Duo-trio test
AS 2542.2.1:2007 Sensory analysis - Specific methods - Paired comparison test
AS ISO/IEC 17025:2005 General requirements for the competence of testing and calibration laboratories
AS 1289.5.4.1:2007 Methods of testing soils for engineering purposes - Soil compaction and density tests - Compaction control test - Dry density ratio, moisture variation and moisture ratio
AS 1289.5.4.1:2007(R2016) Methods of testing soils for engineering purposes - Soil compaction and density tests - Compaction control test - Dry density ratio, moisture variation and moisture ratio
HB 18.43.1-1998 Guidelines for third-party certification and accreditation - Guide 43 - Proficiency testing by interlaboratory comparisons - Part 1: Development and operation of proficiency testing schemes
AS/NZS 2891.14.5:2014
AS ISO 3471:2020 Earth-moving machinery — Roll-over protective structures — Laboratory tests and performance requirements
AS 1289.5.4.3:2006 Methods of testing soils for engineering purposes - Soil compaction and density tests - Compaction control test - Dry density ratio and moisture ratio using statistical selection of reference values
AS 1289.6.1.2:1998(R2013)

Professional Standard - Forestry, Laboratory comparison test plan

LY/T 1283-1998 Method of laboratory test for toxicity of wood preservatives to decay fungi
LY/T 1284-1998 Method of laboratory test for toxicity of wood preservatives to soft-rot fungus
LY/T 1284-2012 Method of laboratory test for toxicity of wood preservatives to soft-rot fungus
LY/T 1283-02011 Laboratory test method for toxicity of wood preservatives to decaying fungi
LY/T1284-2012 Method of laboratory test for toxicity of wood preservatives to soft-rot fungus
LY/T 1283-2011 Method of laboratory test for toxicity of wood preservatives to decay fungi

European Committee for Standardization (CEN), Laboratory comparison test plan

EN 14727:2005 Laboratory furniture - Storage units for laboratories - Requirements and test methods
CEN PREN 14727-2003 Laboratory furniture - Storage units for laboratories - Requirements and test methods
EN ISO 10399:2018 Sensory analysis - Methodology - Duo-trio test
EN ISO 5495:2007 Sensory analysis - Methodology - Paired comparison test (ISO 5495:2005 and ISO 5495:2005/Cor 1:2006)
EN ISO 10399:2010 Sensory analysis - Methodology - Duo-trio test
EN 13150:2001 Workbenches for laboratories - Dimensions, safety requirements and test methods
EN ISO 3696:1995 Water for Analytical Laboratory Use- Specification and Test Methods (ISO 3696 : 1987)
EN 12697-35:2016 Bituminous mixtures - Test methods - Part 35: Laboratory mixing
CEN ISO/TS 22117:2010 Microbiology of food and animal feeding stuffs - Specific requirements and guidance for proficiency testing by interlaboratory comparison (ISO/TS 22117:2010)
CEN/TR 10345:2013 Guideline for statistical data treatment of inter laboratory tests for validation of analytical methods
EN ISO/TS 22117:2010 Microbiology of food and animal feeding stuffs - Specific requirements and guidance for proficiency testing by interlaboratory comparison

IEEE - The Institute of Electrical and Electronics Engineers@ Inc., Laboratory comparison test plan

IEEE P1876/D10-2018 Draft Standard for Networked Smart Learning Objects for Online Laboratories
IEEE P1876/D11-2019 Draft Standard for Networked Smart Learning Objects for Online Laboratories

Lithuanian Standards Office , Laboratory comparison test plan

LST EN 16101-2013 Water quality - Guidance standard on interlaboratory comparison studies for ecological assessment
LST EN 14727-2006 Laboratory furniture - Storage units for laboratories - Requirements and test methods

AENOR, Laboratory comparison test plan

UNE-EN 16101:2013 Water quality - Guidance standard on interlaboratory comparison studies for ecological assessment
UNE-EN 14727:2006 Laboratory furniture - Storage units for laboratories - Requirements and test methods
UNE-EN 12697-35:2017 Bituminous mixtures - Test methods - Part 35: Laboratory mixing
UNE 400311-2:1998 LABORATORY GLASSWARE. DENSITY HYDROMETERS FOR GENERAL PURPOSES. PART 2: TEST METHODS AND USE.
UNE 103502:1995 TEST LABORATORY METHOD FOR DETERMINING IN A SOIL THE C.B.R. INDEX.

Indonesia Standards, Laboratory comparison test plan

SNI 1744-2012 Metode uji CBR laboratorium
SNI 3419-2008
SNI 7957-2014
SNI 2815-2011 Cara uji tekan triaksial pada batu di laboratorium
SNI 03-3399-1994 Test method for tensile strength of wood in the laboratories
SNI 07-6217-2000 Testing methods of metal laboratory corrosion
SNI 03-6430.1-2000 Test methods for compressive strength of grouts for preplaced-aggregate concrete in the laboratory
SNI 2486-2011 Cara uji kuat tarik tidak langsung batu di laboratorium
SNI 03-3400-1994 Test method for friction strenght of wood in laboratories.
SNI 03-3959-1995 Test method for bending strength of wood in laboratories
SNI 03-3960-1995 Test method for modulus of bending elasticity of wood in laboratories
SNI 8072-2016 Cara uji pengukuran potensi keruntuhan tanah di laboratorium
SNI 13-6794-2002 Test methods for determination of fiber content on peat sample by drainage in the laboratory

TR-TSE, Laboratory comparison test plan

TS 1069-1972 METHODS OF LABORATORY TESTS FOR MEAT PRODUCTS
TS 784-1969 METHODS FOR THERMAL SHOCK TESTS ON LABORATORY GLASSWARE

GOSTR, Laboratory comparison test plan

GOST 34276-2017 Soils. Methods of laboratory determination of the specific resistance to penetration

YU-JUS, Laboratory comparison test plan

JUS U.B1.042-1997 Testing ofsoil - Determination of the California bearing rado in laboratory
JUS B.E8.095-1987 Laboratory glassware. Methods for thermal shock test

CZ-CSN, Laboratory comparison test plan

CSN 72 1030-1987 Laboratory direct shear box drained test of soils
CSN ISO 1775:1994 Porcelain laboratory apparatus. Requirements and methods of test

Professional Standard - Navy, Laboratory comparison test plan

HJB 319-2005 Seagrass-1 fuze laboratory test method
HJB 320-2005 Pomegranate-5 fuze laboratory test method

ES-UNE, Laboratory comparison test plan

UNE-EN ISO 22117:2020 Microbiology of the food chain - Specific requirements and guidance for proficiency testing by interlaboratory comparison (ISO 22117:2019)

Professional Standard - Electricity, Laboratory comparison test plan

DL/T 1287-2013 Determination of electrical resistivity of coal ash in laboratory

Compressed Gas Association (U.S.), Laboratory comparison test plan

CGA M-13-2008 Certifying third-party testing laboratories
CGA M-13-2014 Certifying third-party testing laboratories

IN-BIS, Laboratory comparison test plan

VN-TCVN, Laboratory comparison test plan

TCVN 4831-2009 Sensory analysis.Methodology.Paired comparison test
TCVN 7532-2005 Passenger car tyres.Verifying tyre capabilities.Laboratory test methods
TCVN 7501-2005 Bitumen.Test method for determination of density (Pycnometer method)
TCVN 7533-2005 Truck and bus tyres.Verifying tyre capabilities.Laboratory test methods

NZ-SNZ, Laboratory comparison test plan

NZS 4407.3.1:1991 Methods of testing road aggregates - Laboratory tests - Test 3.1 The water content of aggregate

BE-NBN, Laboratory comparison test plan

NBN T 01-211-1988 Water for analytical laboratory use - Specification and test methods

Association of German Mechanical Engineers, Laboratory comparison test plan

VDI 4221 Blatt 1-2015 Quality assurance - Requirements on interlaboratory tests in immission control - Requirements on providers of interlaboratory tests
VDI 4221 Blatt 2-2017 Quality assurance - Requirements on interlaboratory tests in immission control - Design, performance and evaluation of interlaboratory tests for emission measurement methods under laboratory conditions

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Laboratory comparison test plan

ASHRAE 3689-1993 Field Performance of Residential Refrigerators: A Comparison with the Laboratory Test
ASHRAE 110-2016 Methods of Testing Performance of Laboratory Fume Hoods
ASHRAE 110 INT 1-2011 Method of Testing Performance of Laboratory Fume Hoods
ASHRAE 130-2016 Laboratory Methods of Testing Air Terminal Units

(U.S.) Ford Automotive Standards, Laboratory comparison test plan

FORD FLTM INDEX VOL 2-2006 FORD LABORATORY TEST METHODS (FLTM) INDEX VOLUME 2 PHYSICAL TEST METHODS
FORD FLTM INDEX VOL 3-2007 FORD LABORATORY TEST METHODS (FLTM) INDEX VOLUME 3 PHYSICAL TEST METHODS
FORD FLTM INDEX VOL 4-2007 FORD LABORATORY TEST METHODS (FLTM) INDEX VOLUME 4 PHYSICAL TEST METHODS
FORD FLTM INDEX VOL 5-2007 FORD LABORATORY TEST METHODS (FLTM) INDEX VOLUME 5 PHYSICAL TEST METHODS
FORD FLTM INDEX VOL 6-2007 FORD LABORATORY TEST METHODS (FLTM) INDEX VOLUME 6 PHYSICAL TEST METHODS
FORD FLTM INDEX VOL 7-2007 FORD LABORATORY TEST METHODS (FLTM) INDEX VOLUME 7 PHYSICAL TEST METHODS
FORD FLTM INDEX VOL 8-2007 FORD LABORATORY TEST METHODS (FLTM) INDEX VOLUME 8 PHYSICAL TEST METHODS

American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE), Laboratory comparison test plan

ASHRAE 64-2005 Methods of Laboratory Testing Remote Mechanical-Draft Evaporative Refrigerant Condensers
ASHRAE 110 ERTA-2016 Methods of Testing Performance of Laboratory Fume Hoods
ASHRAE 110-1995 Method of Testing Performance of Laboratory Fume Hoods
ASHRAE DA-07-032-2007 Laboratory Evaluation of Residential Window Installation Methods on Stucco Wall Assemblies
ASHRAE 207-2021 Laboratory Method of Test of Fault Detection and Diagnosis for Air Economizers

NO-SN, Laboratory comparison test plan

NS 8011-1982 Geotechnical testing - Laboratory methods - Density
NS 8001-1982 Geotechnical testing - Laboratory methods - Percussion liquid limit
NS 8002-1982 Geotechnical testing - Laboratory methods - Fall cone liquid limit
NS 8004-1982 Geotechnical testing - Laboratory methods - Shrinkage limit
NS 8013-1982 Geotechnical testing - Laboratory methods - Water content
NS 8003-1982 Geotechnical testing - Laboratory methods - Plastic limit

CEN - European Committee for Standardization, Laboratory comparison test plan

PREN 12697-32-2017 Bituminous mixtures - Test methods - Part 32: Laboratory compaction of bituminous mixtures by vibratory compactor
PD CEN/TS 14793:2005 Stationary source emission - Intralaboratory validation procedure for an alternative method compared to a reference method
EN 12697-32:2019 Bituminous mixtures - Test methods - Part 32: Specimen preparation by vibratory compactor

Professional Standard - Coal, Laboratory comparison test plan

MT/T 144-1997 Methods for the coal flotation test by progressive release in coal separation lab

Society of Automotive Engineers (SAE), Laboratory comparison test plan

SAE ARP1974-1986 Clamps, Support, Comparative Fatigue Strengths, Test Method

Professional Standard - Hygiene , Laboratory comparison test plan

WS/T 420-2013 Verification of analytical performance of quantitative kits by clinical laboratory

Military Standard of the People's Republic of China-General Armament Department, Laboratory comparison test plan

GJB 8671.15-2015 Test methods for metallic cartridges Part 15: Comparative test of internal ballistic performance
GJB 150.3A-2009 Laboratory environmental test methods for military materiel.Part 3:High temperature test
GJB 150.9A-2009 Laboratory environmental test methods for military materiel.Part 9:Damp heat test
GJB 150.12A-2009 Laboratory environmental test methods for military materiel.Part 12:Sand and dust test
GJB 150.14A-2009 Laboratory environmental test methods for military materiel.Part 14:Immersion test
GJB 150.16A-2009 Laboratory environmental test methods for military materiel.Part 16:Vibration test
GJB 150.17A-2009 Laboratory environmental test methods for military materiel.Part 17:Acoustic noise test
GJB 150.18A-2009 Laboratory environmental test methods for military materiel.Part 18:Shock test
GJB 150.10A-2009 laboratory environmental test methods for military material.Part 10:Fungus test
GJB 150.15A-2009 Laboratory environmental test methods for military materiel.Part 15:Acceleration test
GJB 150.5A-2009 Laboratory environmental test methods for military materiel.Part 5:Temperature shock test
GJB 150.20A-2009 Laboratory environmental test methods for military materiel.Part 20:Gunfire vibration test
GJB 150.22A-2009 Laboratory environmental test methods for military materiel.Part 22:Icing/freezing rain test
GJB 150.29-2009 Laboratory environmental test methods for military materiel.Part 29:Ballistic shock test
GJB 150.7A-2009 Laboratory environmental test methods for military material.Part 7:Solar radiation test
GJB 150.26-2009 Labortory environmental test methods for military materiel.Part 26:Contamination by fluids test
GJB 150.28-2009 Laboratory environmental test methods for military materiel.Part 28:Acidic atmosphere test
GJB 570.4-1988 Data acquisition and processing of dynamic comparison test of meteorological instrument finalization test method
GJB 150.13A-2009 Laboratory environmental test methods for military materiel.Part 13:Explosive atmosphere test

PL-PKN, Laboratory comparison test plan

PN B13003-1986 Laboratory glassware General specifications and methods of tests
PN BN 7469-01-1968 Printing inks System of laboratory testing methods
PN B13043-1986 Laboratory glassware Test tubes Specification and methods of test

未注明发布机构, Laboratory comparison test plan

GJB 150.21A-2009 Military equipment laboratory environmental test methods Part 21: Wind pressure test
GJB 150.4A-2009 Military equipment laboratory environmental test methods Part 4: Low temperature test
GJB 150.11A-2009 Military equipment laboratory environmental test methods Part 11: Salt spray test
GJB 150.8A-2009 Military equipment laboratory environmental test methods Part 8: Rain test
BS EN ISO 3696:1995(1999) Water for analytical laboratory use — Specification and test methods
BS EN 273:1992 Wood preservatives — Determination of the curative action against Lyctus brunneus (Stephens) (laboratory method)
BS EN ISO 3675:1998(2001)*BS 2000-160:1998 Methods of test for petroleum and its products — BS 2000 - 160 : Crude petroleum and liquid petroleum products — Laboratory determination of density — Hydrometer method
GJB 150.23A-2009 Military Equipment Laboratory Environmental Test Methods Part 23: Tilt and Swing Tests
GJB 150.2A-2009 Military equipment laboratory environmental test methods Part 2: Low pressure (altitude) test
BS EN ISO 3471:2008(2009) Earth - moving machinery — Roll - over protective structures — Laboratory tests and performance requirements
BS 7530-1:1992(2007) Methods for Froth flotation testing of hard coal — Part 1 : Laboratory procedure

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Laboratory comparison test plan

GB/T 2291-2016 Method for preparation of coal tar pitch specimens
GB/T 3685-2017 Conveyor belts—Laboratory scale flammability characteristics—Test method

机械工业部, Laboratory comparison test plan

JB/T 7913-1995 Preparation and verification methods of steel comparison test blocks for ultrasonic testing

Canadian General Standards Board （CGSB), Laboratory comparison test plan

CGSB 1-GP-71 METH 14.7-1982 Methodes D'Essai Des Peintures Et Pigments Pouvoir Couvrant Methode Du Rapport De Contraste

Institute of Electrical and Electronics Engineers (IEEE), Laboratory comparison test plan

IEEE P2665/D2, May 2022 IEEE Draft Recommended Practice for Statistical Process Control for EMC Test Laboratories

Professional Standard - Light Industry, Laboratory comparison test plan

QB/T 4873-2015 Test methods of artificial leather and synthetic leather.Exposure to laboratory light sources

IT-UNI, Laboratory comparison test plan

UNI 7497-1975

The American Road & Transportation Builders Association, Laboratory comparison test plan

AASHTO T 265-2015 Standard Method of Test for Laboratory Determination of Moisture Content of Soils

AASHTO - American Association of State Highway and Transportation Officials, Laboratory comparison test plan

T 265-1993 Standard Method of Test for Laboratory Determination of Moisture Content of Soils
T 265-2012 Standard Method of Test for Laboratory Determination of Moisture Content of Soils
T 288-1991 Standard Method of Test for Determining Minimum Laboratory Soil Resistivity
T 288-2012 Standard Method of Test for Determining Minimum Laboratory Soil Resistivity

Professional Standard - Energy, Laboratory comparison test plan

NB/SH/T 6001-2020 Guidelines for interlaboratory studies to determine the precision of test methods