ZH
RU
ES
In-lab comparison test plan
In-lab comparison test plan, Total:56 items.
In the international standard classification, In-lab comparison test plan involves: Quality, Test conditions and procedures in general, Kitchen equipment, Internal combustion engines for road vehicles, Water quality, Medical sciences and health care facilities in general, Road engineering, Paints and varnishes, Microbiology, Waxes, bituminous materials and other petroleum products, Meat, meat products and other animal produce, Pesticides and other agrochemicals, Refractories, Paint coating processes, Structures of buildings.
RU-GOST R, In-lab comparison test plan
- GOST R ISO 13528-2010 Statistical methods. Using in proficiency testing by interlaboratory comparison tests
- GOST R 53133.2-2008 Medical laboratory technologies. Quality control of clinical laboratory tests. Part 2. Rules for intra-laboratory quality control of quantitative methods of clinical laboratory tests using control materials
Professional Standard - Certification and Accreditation, In-lab comparison test plan
- RB/T 208-2016 Internal quality control of chemical laboratory.Comparison test
International Organization for Standardization (ISO), In-lab comparison test plan
- ISO/IEC Guide 43-2:1997 Proficiency testing by interlaboratory comparisons - Part 2: Selection and use of proficiency testing schemes by laboratory accreditation bodies
- ISO/IEC Guide 43-1:1997 Proficiency testing by interlaboratory comparisons - Part 1: Development and operation of proficiency testing schemes
- ISO/TR 19867-3:2018 Clean cookstoves and clean cooking solutions - Harmonized laboratory test protocols - Part 3: Voluntary performance targets for cookstoves based on laboratory testing
- ISO/TS 17536-2:2017 Road vehicles - Aerosol separator performance test for internal combustion engines - Part 2: Laboratory test method
- ISO 17536-4:2019 Road Vehicles — Aerosol separator performance test for internal combustion engines — Part 4: Laboratory fractional efficiency test method
- ISO/CD TR 20659-1:2023 Rheological test methods — Fundamentals and interlaboratory comparisons — Part 1: Determination of the yield point
- ISO/DTR 20659-1:2023 Rheological test methods — Fundamentals and interlaboratory comparisons — Part 1: Determination of the yield point
- ISO 16140-4:2020/DAmd 1 Microbiology of the food chain — Method validation — Part 4: Protocol for method validation in a single laboratory — Amendment 1: Validation of a larger test portion size for qualitative methods
- ISO 16140-4:2020/CD Amd 1 Microbiology of the food chain — Method validation — Part 4: Protocol for method validation in a single laboratory — Amendment 1: Annex H - Validation of larger test portion size for qualitative methods
- ISO 12944-6:1998 Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 6: Laboratory performance test methods
- ISO 12944-6:2018 Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 6: Laboratory performance test methods
API - American Petroleum Institute, In-lab comparison test plan
- API REPORT 83-50-1985 Interlaboratory and Intralaboratory Comparision of the API Drilling Fluids Bioassay Protocol
TH-TISI, In-lab comparison test plan
- TIS 5043.1-1997 Proficiency testing by interlaboratory comparisons.part 1: development and operation of proficiency testing schemes
- TIS 5043.2-1997 Proficiency testing by interlaboratory comparisons.part 2: selection and use of proficiency testing schemes by laboratory accreditation bodies
Korean Agency for Technology and Standards (KATS), In-lab comparison test plan
- KS A ISO/IEC GUIDE 43-2-2002(2012) Proficiency testing by interlaboratory comparisons-Part 2:Selection and use of proficiency testing schemes by laboratory accreditation bodies
- KS A ISO/IEC GUIDE 43-1-2002(2012) Proficiency testing by interlaboratory comparisons-Part 1:Development and operation of proficiency testing schemes by laboratory accreditation bodies
- KS A ISO/IEC GUIDE 43-2:2002 Proficiency testing by interlaboratory comparisons-Part 2:Selection and use of proficiency testing schemes by laboratory accreditation bodies
- KS A ISO/IEC GUIDE 43-2:2013 Proficiency testing by interlaboratory comparisons-Part 2:Selection and use of proficiency testing schemes by laboratory accreditation bodies
- KS A ISO/IEC GUIDE 43-1:2002 Proficiency testing by interlaboratory comparisons-Part 1:Development and operation of proficiency testing schemes by laboratory accreditation bodies
- KS A ISO/IEC GUIDE 43-1:2013 Proficiency testing by interlaboratory comparisons-Part 1:Development and operation of proficiency testing schemes by laboratory accreditation bodies
- KS M ISO 12944-6:2008 Paints and varnishes-Corrosion protection of steel structures by protective paint systems-Part 6:Laboratory performance test methods
- KS M ISO 12944-6:2021 Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 6: Laboratory performance test methods
German Institute for Standardization, In-lab comparison test plan
- DIN V 55394-2:2000 Proficiency testing by interlaboratory comparisons - Part 2: Selection and use of proficiency testing schemes by laboratory accreditation bodies (ISO/IEC Guide 43-2:1997)
- DIN ISO 13528:2009 Statistical methods for use in proficiency testing by interlaboratory comparisons (ISO 13528:2005); Text in German and English
- DIN 38402-45:2014 German standard methods for the examination of water, waste water and sludge - General information (group A) - Part 45: Interlaboratory comparisons for proficiency testing of laboratories (A 45)
- DIN 38402-45:2003 German standard methods for the examination of water, waste water and sludge - General information (group A) - Part 45: Interlaboratory comparisons for proficiency testing of laboratories (A 45)
- DIN EN 12697-32:2017 Bituminous mixtures - Test methods - Part 32: Laboratory compaction of bituminous mixtures by vibratory compactor; German and English version prEN 12697-32:2017
- DIN EN 12697-32:2007 Bituminous mixtures - Test methods for hot mix asphalt - Part 32: Laboratory compaction of bituminous mixtures by vibratory compactor (includes Amendment A1:2007); English version of DIN EN 12697-32:2007-11
Military Standard of the People's Republic of China-General Armament Department, In-lab comparison test plan
- GJB 8671.15-2015 Test methods for metallic cartridges Part 15: Comparative test of internal ballistic performance
Standard Association of Australia (SAA), In-lab comparison test plan
- HB 18.43.2-1998 Guidelines for third-party certification and accreditation - Guide 43 - Proficiency testing by interlaboratory comparisons - Part 2: Selection and use of proficiency testing schemes by laboratory accreditation bodies
- HB 18.43.1-1998 Guidelines for third-party certification and accreditation - Guide 43 - Proficiency testing by interlaboratory comparisons - Part 1: Development and operation of proficiency testing schemes
American National Standards Institute (ANSI), In-lab comparison test plan
- ANSI/ASTM E2554:2013 Practice for Estimating and Monitoring the Uncertainty of Test Results of a Test Method in a Single Laboratory Using a Control Sample Program
Japanese Industrial Standards Committee (JISC), In-lab comparison test plan
- JIS Q 0043-2:1998 Proficiency testing by interlaboratory comparisons -- Part 2: Selection and use of proficiency testing schemes by laboratory accreditation bodies
- JIS Q 0043-1:1998 Proficiency testing by interlaboratory comparisons -- Part 1: Development and operation of proficiency testing schemes
American Society for Testing and Materials (ASTM), In-lab comparison test plan
- ASTM E2554-07 Standard Practice for Estimating and Monitoring the Uncertainty of Test Results of a Test Method in a Single Laboratory Using a Control Sample Program
CEN - European Committee for Standardization, In-lab comparison test plan
- PREN 12697-32-2017 Bituminous mixtures - Test methods - Part 32: Laboratory compaction of bituminous mixtures by vibratory compactor
- EN 12697-32:2019 Bituminous mixtures - Test methods - Part 32: Specimen preparation by vibratory compactor
- EN ISO 12944-6:2018 Paints and Varnishes - Corrosion Protection of Steel Structures by Protective Paint Systems - Part 6: Laboratory Performance Test Methods
British Standards Institution (BSI), In-lab comparison test plan
- BS EN 12697-32:2003 Bituminous mixtures —
Test methods for hot
mix asphalt —
Part 32: Laboratory compaction of
bituminous mixtures by vibratory
compactor
- BS 4401-13:1979 Methods of test for meat and meat products - Determination of glucono-delta-lactone content (reference method)
- 19/30314257 DC BS ISO 17536-4. Road Vehicles. Aerosol separator performance test for internal combustion engines - Part 4. Laboratory fractional efficiency test method
- BS EN 993-13:1995 Methods of test for dense shaped refractory products - Specification for pyrometric reference cones for laboratory use
- BS 5131 Sec.6.1:1981 Methods of test for footwear and footwear materials. Codes of practice. Code of practice for the comparative evaluation by wear trial of materials, components or constructions
Association Francaise de Normalisation, In-lab comparison test plan
- NF P98-818-32/IN1:2007 Bituminous mixtures - Test methods for hot mix asphalt - Part 32 : laboratory compaction of bituminous mixtures by vibratory compactor.
- NF P98-818-32:2007 Bituminous mixtures - Test methods for hot mix asphalt - Part 32 : laboratory compaction of bituminous mixtures by vibratory compactor.
Professional Standard - Agriculture, In-lab comparison test plan
- NY/T 1155.11-2011 Pesticide guidelines for laboratory bioactivity tests.Part 11: Herbicide activity on Spirogyra crassa
AENOR, In-lab comparison test plan
- UNE 400311-2:1998 LABORATORY GLASSWARE. DENSITY HYDROMETERS FOR GENERAL PURPOSES. PART 2: TEST METHODS AND USE.
- UNE-EN 12697-32:2003+A1:2007 Bituminous mixtures - Test methods for hot mix asphalt - Part 32: Laboratory compaction of bituminous mixtures by vibratory compactor
Danish Standards Foundation, In-lab comparison test plan
- DS/EN 12697-32+A1:2007 Bituminous mixtures - Test methods for hot mix asphalt - Part 32: Laboratory compaction of bituminous mixtures by vibratory compactor
Lithuanian Standards Office , In-lab comparison test plan
- LST EN 12697-32+A1-2007 Bituminous mixtures - Test methods for hot mix asphalt - Part 32: Laboratory compaction of bituminous mixtures by vibratory compactor
ZA-SANS, In-lab comparison test plan
- SANS 12944-6:1998 Paints and varnishes - Corrosion protection of steel structures by protective paint systems Part 6: Laboratory performance test methods
KR-KS, In-lab comparison test plan
- KS M ISO 12944-6-2021 Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 6: Laboratory performance test methods
ES-AENOR, In-lab comparison test plan
- UNE-EN 302-2:1994 Adhesives for load-bearing timber structures. Test methods. Part 2: Determination of resistance to delamination (Laboratory method)