ZH
RU
ES

Proficiency Testing Analysis Method

Proficiency Testing Analysis Method, Total:500 items.

In the international standard classification, Proficiency Testing Analysis Method involves: Thermodynamics and temperature measurements, Veterinary medicine, Farming and forestry, Protection against fire, Animal feeding stuffs, Analytical chemistry, General methods of tests and analysis for food products, Cereals, pulses and derived products, Water quality, Medical sciences and health care facilities in general, Products of the chemical industry, Quality, Tyres, Gas and steam turbines. Steam engines, Pharmaceutics, Natural gas, Power stations in general, Burners. Boilers, Glass, Tobacco, tobacco products and related equipment, Microbiology, Fuels, Ferrous metals, Industrial trucks, Nuclear energy engineering, Laboratory medicine, Metrology and measurement in general, Acoustics and acoustic measurements, Optics and optical measurements, Surface treatment and coating, Non-destructive testing, Fluid power systems, Coals, Plastics, Ventilators. Fans. Air-conditioners, Sugar. Sugar products. Starch, Raw materials for rubber and plastics, Rubber, Industrial automation systems, Footwear, Testing of metals, Medical equipment, Electrical wires and cables, Fibre optic communications, Linear and angular measurements, Test conditions and procedures in general, Milk and milk products, Electricity. Magnetism. Electrical and magnetic measurements, Rotating machinery, Construction materials, Graphical symbols, Mechanical testing, Equipment for the chemical industry, Biology. Botany. Zoology, Terminology (principles and coordination), Software development and system documentation, Installations in buildings, Earth-moving machinery, Road vehicle systems, Company organization and management, Optoelectronics. Laser equipment, Chipless working equipment, Pumps, Materials and articles in contact with foodstuffs, Reinforced plastics, Protection against crime, MINING AND MINERALS, Rubber and plastics products, Rails and railway components, Non-ferrous metals, Information technology (IT) in general, Materials and components for railway engineering, Lubricants, industrial oils and related products.

Compressed Gas Association (U.S.), Proficiency Testing Analysis Method

CGA M-6-2013 Guideline for analytical method volidation

American Society for Testing and Materials (ASTM), Proficiency Testing Analysis Method

ASTM E2918-18 Standard Test Method for Performance Validation of Thermomechanical Analyzers
ASTM E2918-18a Standard Test Method for Performance Validation of Thermomechanical Analyzers
ASTM E2918-13 Standard Test Method for Performance Validation of Thermomechanical Analyzers
ASTM E2918-23 Standard Test Method for Performance Validation of Thermomechanical Analyzers
ASTM E2857-11(2021)e1 Standard Guide for Validating Analytical Methods
ASTM E2857-21 Standard Guide for Validating Analytical Methods
ASTM E2857-22 Standard Guide for Validating Analytical Methods
ASTM E2857-11(2016) Standard Guide for Validating Analytical Methods
ASTM E2857-11 Standard Guide for Validating Analytical Methods
ASTM D7372-21 Standard Guide for Analysis and Interpretation of Proficiency Test Program Results
ASTM D8428-21 Standard Guide for Establishing Analyst Competence to Perform a Test Method
ASTM E2898-20 Standard Guide for Risk-Based Validation of Analytical Methods for PAT Applications
ASTM E2898-20a Standard Guide for Risk-Based Validation of Analytical Methods for PAT Applications
ASTM F218-05 Standard Test Method for Analyzing Stress in Glass
ASTM F218-95 Standard Test Method for Analyzing Stress in Glass
ASTM E2549-09 Standard Practice for Validation of Seized-Drug Analytical Methods
ASTM E2898-13 Standard Guide for Risk-Based Validation of Analytical Methods for PAT Applications
ASTM E1131-08 Standard Test Method for Compositional Analysis by Thermogravimetry
ASTM E2206-02 Standard Method for Force Calibration Of Thermomechnical Analyzers
ASTM E2744-10 Standard Test Method for Pressure Calibration of Thermal Analyzers
ASTM E2744-21 Standard Test Method for Pressure Calibration of Thermal Analyzers
ASTM E2744-10(2015) Standard Test Method for Pressure Calibration of Thermal Analyzers
ASTM E2744-16 Standard Test Method for Pressure Calibration of Thermal Analyzers
ASTM E1641-07 Standard Test Method for Decomposition Kinetics by Thermogravimetry
ASTM E1641-07(2012) Standard Test Method for Decomposition Kinetics by Thermogravimetry
ASTM E2206-06 Standard Test Method for Force Calibration Of Thermomechnical Analyzers
ASTM E2206-11(2015) Standard Test Method for Force Calibration of Thermomechanical Analyzers
ASTM E1782-03 Standard Test Method for Determining Vapor Pressure by Thermal Analysis
ASTM E1782-98 Standard Test Method for Determining Vapor Pressure by Thermal Analysis
ASTM E1782-22 Standard Test Method for Determining Vapor Pressure by Thermal Analysis
ASTM E1782-14 Standard Test Method for Determining Vapor Pressure by Thermal Analysis
ASTM E1782-08 Standard Test Method for Determining Vapor Pressure by Thermal Analysis
A-A-59410A-2015 Standard Test Method for Decomposition Kinetics by Thermogravimetry
A-A-54409 NOT 1-2012 Standard Test Method for Decomposition Kinetics by Thermogravimetry
A-A-59163A-2010 Standard Test Method for Decomposition Kinetics by Thermogravimetry
ASTM E1641-99 Standard Test Method for Decomposition Kinetics by Thermogravimetry
A-A-54409-1991 Standard Test Method for Decomposition Kinetics by Thermogravimetry
A-A-55281-1995 Standard Test Method for Decomposition Kinetics by Thermogravimetry
A-A-55220-1995 Standard Test Method for Decomposition Kinetics by Thermogravimetry
A-A-54923-1993 Standard Test Method for Decomposition Kinetics by Thermogravimetry
A-A 59377B-2016 Standard Test Method for Decomposition Kinetics by Thermogravimetry
ASTM E1641-15 Standard Test Method for Decomposition Kinetics by Thermogravimetry Using the Ozawa/Flynn/Wall Method
ASTM E1641-16 Standard Test Method for Decomposition Kinetics by Thermogravimetry Using the Ozawa/Flynn/Wall Method
ASTM D6370-99(2003) Standard Test Method for Rubber-Compositional Analysis by Thermogravimetry (TGA)
ASTM E2489-11 Standard Practice for Statistical Analysis of One-Sample and Two-Sample Interlaboratory Proficiency Testing Programs
ASTM E2489-21 Standard Practice for Statistical Analysis of One-Sample and Two-Sample Interlaboratory Proficiency Testing Programs
ASTM E2898-14 Standard Guide for Risk-Based Validation of Analytical Methods for PAT Applications
ASTM E1641-13 Standard Test Method for Decomposition Kinetics by Thermogravimetry Using the Ozawa/Flynn/Wall Method
ASTM E2437-05 Standard Practice for Designing and Validating Performance-Based Test Methods for the Analysis of Metals, Ores, and Related Materials
ASTM D6370-99(2014) Standard Test Method for Rubber—Compositional Analysis by Thermogravimetry (TGA)
ASTM E2347-11 Standard Test Method for Indentation Softening Temperature by Thermomechanical Analysis
ASTM E2524-08 Standard Test Method for Analysis of Hemolytic Properties of Nanoparticles
ASTM E2524-22 Standard Test Method for Analysis of Hemolytic Properties of Nanoparticles
ASTM E2524-08(2013) Standard Test Method for Analysis of Hemolytic Properties of Nanoparticles
ASTM E2402-05 Standard Test Method for Mass Loss and Residue Measurement Validation of Thermogravimetric Analyzers
ASTM E2402-11 Standard Test Method for Mass Loss and Residue Measurement Validation of Thermogravimetric Analyzers
ASTM E1824-09e1 Standard Test Method for Assignment of a Glass Transition Temperature Using Thermomechanical Analysis: Tension Method
ASTM E2402-11(2017) Standard Test Method for Mass Loss and Residue Measurement Validation of Thermogravimetric Analyzers
ASTM E2402-19 Standard Test Method for Mass Loss and Residue Measurement Validation of Thermogravimetric Analyzers
ASTM B975-18e1 Standard Test Method for Measurement of Internal Stress of Metallic Coatings by Split Strip Evaluation (Deposit Stress Analyzer Method)
ASTM B975-18 Standard Test Method for Measurement of Internal Stress of Metallic Coatings by Split Strip Evaluation (Deposit Stress Analyzer Method)
ASTM E1641-23 Standard Test Method for Decomposition Kinetics by Thermogravimetry Using the Ozawa/Flynn/Wall Method
ASTM E1640-13(2018) Standard Test Method for Assignment of the Glass Transition Temperature By Dynamic Mechanical Analysis
ASTM E1640-18 Standard Test Method for Assignment of the Glass Transition Temperature By Dynamic Mechanical Analysis
ASTM E831-12 Standard Test Method for Linear Thermal Expansion of Solid Materials by Thermomechanical Analysis
ASTM E2254-09 Standard Test Method for Storage Modulus Calibration of Dynamic Mechanical Analyzers
ASTM E2410-04 Standard Practice for Designing and Validating Performance Based Test Methods for the Analysis of Metals, Ores, and Related Materials (Withdrawn 2006)
ASTM B975-22 Standard Test Method for Measurement of Internal Stress of Metallic Coatings by Split Strip Evaluation (Deposit Stress Analyzer Method)
ASTM B975-15 Standard Test Method for Measurement of Internal Stress of Metallic Coatings by Split Strip Evaluation (Deposit Stress Analyzer Method)
ASTM E2092-09 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM E1601-19 Standard Practice for Conducting an Interlaboratory Study to Evaluate the Performance of an Analytical Method
ASTM E1640-23 Standard Test Method for Assignment of the Glass Transition Temperature By Dynamic Mechanical Analysis
ASTM E1824-02 Standard Test Method for Assignment of a Glass Transition Temperature Using Thermomechanical Analysis Under Tension
ASTM E1824-96 Standard Test Method for Assignment of a Glass Transition Temperature Using Thermomechanical Analysis Under Tension
ASTM E1640-13 Standard Test Method for Assignment of the Glass Transition Temperature By Dynamic Mechanical Analysis
ASTM E1640-04 Standard Test Method for Assignment of the Glass Transition Temperature By Dynamic Mechanical Analysis
ASTM E2347-16 Standard Test Method for Indentation Softening Temperature by Thermomechanical Analysis
ASTM E2347-21 Standard Test Method for Indentation Softening Temperature by Thermomechanical Analysis
ASTM E1640-09 Standard Test Method for Assignment of the Glass Transition Temperature By Dynamic Mechanical Analysis
ASTM E1824-09 Standard Test Method for Assignment of a Glass Transition Temperature Using Thermomechanical Analysis: Tension Method
ASTM D5028-96(2003) Standard Test Method for Curing Properties of Pultrusion Resins by Thermal Analysis
ASTM D5028-17 Standard Test Method for Curing Properties of Pultrusion Resins by Thermal Analysis
ASTM E295-82(2000) Standard Test Method for Measured Speed of Oil Diffusion Pumps
ASTM E2958-21 Standard Test Methods for Kinetic Parameters by Factor Jump/Modulated Thermogravimetry
ASTM F218-13 Standard Test Method for Measuring Optical Retardation and Analyzing Stress in Glass
ASTM E1601-12 Standard Practice for Conducting an Interlaboratory Study to Evaluate the Performance of an Analytical Method
ASTM E2823-11 Standard Test Method for Analysis of Nickel Alloys by Inductively Coupled Plasma Mass Spectrometry (Performance-Based Method)

Association Francaise de Normalisation, Proficiency Testing Analysis Method

NF U47-400:2014 Animal health analysis methods - Guide for the organisation of interlaboratory proficiency testing in animal health
XP CEN/TS 16800:2021 Lignes directrices pour la validation des méthodes d'analyse physico-chimiques
NF ISO 12828-2:2020 Méthode de validation des analyses de gaz d'incendie - Partie 2 : validation intralaboratoire des méthodes de quantification
XP V18-801*XP CEN/TS 17455:2020 Animal feeding stuffs - Methods of sampling and analysis - Performance criteria for single laboratory validated and ring-trial validated methods of analysis for the determination of mycotoxins
XP V18-800*XP CEN/TS 17174:2018 Animal feeding stuffs: Methods of sampling and analysis - Performance criteria for single laboratory validated and ring-trial validated methods of analysis for the determination of heavy metals
FD CEN/TR 16059:2011 Analyse des produits alimentaires - Critères de performance des méthodes validées monolaboratoires d'analyse des mycotoxines
NF X06-510*NF ISO 13528:2015 Statistical methods for use in proficiency testing by interlaboratory comparison
NF X65-040-2*NF ISO 12828-2:2020 Validation method for fire gas analysis - Part 2 : Intralaboratory validation of quantification methods
XP T90-800*XP CEN/TS 16800:2021 Guideline for the validation of physico-chemical analytical methods
XP ISO/TS 22176:2020 Cosmétiques - Méthodes analytiques - Développement d'une approche globale pour la validation des méthodes analytiques quantitatives
NF ISO 10231:2022 Pneumatiques pour motocycles - Méthodes d'essai pour la vérification de l'aptitude des pneumatiques
XP ISO/TS 16393:2019 Analyse de biomarqueurs moléculaires - Détermination des caractéristiques de performance des méthodes de mesure qualitatives et validation des méthodes
NF ISO 13528:2022 Méthodes statistiques utilisées dans les essais d'aptitude par comparaison interlaboratoires
XP CEN/TS 17174:2018 Aliments des animaux : Méthodes d'échantillonnage et d'analyse - Critères de performance pour les méthodes d'analyse validées par un ou plusieurs laboratoires pour le dosage des métaux lourds
XP CEN/TS 17455:2020 Aliments des animaux - Méthodes d'échantillonnage et d'analyse - Critères de performance des méthodes d'analyse des mycotoxines validées dans un seul laboratoire ou suite à un essai interlaboratoires
NF E38-350:1995 Heat exchangers. Verification methods for thermodynamic performance of power plant condensers.
NF V37-022:2013 Routine analytical cigarette-smoking machine - Additional test methods for machine verification
NF ISO 12787:2012 Cosmétiques - Méthodes analytiques - Critères de validation pour les résultats analytiques utilisant des techniques chromatographiques
FD A06-002*FD CEN/TR 10345:2014 Guideline for statistical data treatment of inter laboratory tests for validation of analytical methods
NF H96-312-1*NF EN 16842-1:2018 Powered industrial trucks - Visibilty - Test method and verification - Part 1 : general requirements
NF V37-022*NF ISO 7210:2019 Routine analytical cigarette-smoking machine - Additional test methods for machine verification
NF EN ISO 16140-5:2020 Microbiologie de la chaîne alimentaire - Validation des méthodes - Partie 5 : protocole pour la validation interlaboratoires de méthodes non commerciales par plan factoriel
NF ISO 7210:2019 Machine à fumer analytique de routine pour cigarettes - Méthodes d'essais complémentaires pour la vérification de la machine
NF ISO 12828-1:2012 Méthode de validation des analyses de gaz d'incendie - Partie 1 : limites de détection et de quantification
NF G62-002:1985 Footwear. Tests methods. Determination of the water absorption and desorption capacity of materials for outsoles.
FD A06-500*FD CEN/TR 10350:2013 Analysis of steels and irons - Internal laboratory procedure for checking the accuracy of an analytical method by using Certified Reference Materials
XP ISO/TS 12828-3:2020 Méthode de validation des analyses de gaz d'incendie - Partie 3 : considérations relatives aux essais interlaboratoires
XP X65-040-3*XP ISO/TS 12828-3:2020 Validation method for fire gas analysis - Part 3 : considerations related to interlaboratory trials
NF EN ISO 6143:2006 Analyse des gaz - Méthodes comparatives pour la détermination et la vérification de la composition des mélanges de gaz pour étalonnage
XP X31-131:2020 Test methods for the environmental characterization of solid matrices - Characterization of analytical methods - Guide for the validation of physico-chemical analytical methods in soil, sediment and sludge matrices and for the selection of test samples
NF EN 17038-2:2019 Pompes - Méthodes de qualification et de vérification de l'indice de rendement énergétique des groupes motopompes rotodynamiques - Partie 2 : essais et calcul de l'indice de rendement énergétique (EEI) des groupes motopompes simples
NF V03-110:2010 Analyse des produits agricoles et alimentaires - Protocole de caractérisation en vue de la validation d'une méthode d'analyse quantitative par construction du profil d'exactitude
NF EN 15305:2009 Essais non-destructifs - Méthode d'essai pour l'analyse des contraintes résiduelles par diffraction des rayons X
NF E58-080-1*NF ISO 14397-1:2007 Earth-moving machinery - Loaders and backhoe loaders - Part 1 : calculation of rated operating capacity and test method for verifying calculated tipping load
NF ISO 13495:2014 Produits alimentaires - Principes de sélection et critères de validation des méthodes d'identification variétale par analyses d'acides nucléiques spécifiques
NF EN 16842-1:2018 Chariots de manutention automoteurs - Visibilité - Méthode d'essai pour la vérification - Partie 1 : prescriptions générales
NF T73-601:1975 Surface active agents. Verification of certain effects of laundering. Methods of analysis and test for unsoiled cotton control cloth.
NF U47-600-2:2015 Animal health analysis methods - PCR - Part 2 : requirements and recommandations for the development and the validation of veterinary PCR
NF A09-285:1999 Non destructive testing - Test methods for residual stress analysis by X-ray diffraction
NF H96-312-3*NF EN 16842-3:2018 Powered industrial trucks - Visibility - Test methods and verification - Part 3 : reach trucks up to and including 10 000 kg capacity
NF ISO 8196-3:2022 Lait - Définition et évaluation de la précision globale des méthodes alternatives d'analyse du lait - Partie 3 : Protocole d'évaluation et de validation des méthodes quantitatives alternatives pour l'analyse du lait
NF EN 13146-10:2017 Applications ferroviaires - Voie - Méthodes d'essai pour les systèmes de fixation - Partie 10 : essai de charge d'épreuve pour la résistance à l'arrachement
NF A09-185*NF EN 15305:2009 Non-destructive testing - Test Method for Residual Stress analysis by X-ray Diffraction.
NF E44-406-2*NF EN 17038-2:2019 Pumps - Methods of qualification and verification of the energy efficiency index for rotodynamic pump units - Part 2 : testing and calculation of energy efficiency index (EEI) of single pump units
NF EN 16842-8:2021 Chariots de manutention automoteurs - Visibilité - Méthodes d'essai et vérification - Partie 8 : chariots en porte-à-faux à conducteur debout ayant une capacité jusqu'à 10 000 kg inclus
NF H96-312-2*NF EN 16842-2:2018 Powered industrial trucks - Visibility - Test method and verification - Part 2 : sit-on counter balanced trucks and rough terrain masted trucks up to and including 10 000 kg capacity
NF H96-312-6*NF EN 16842-6:2018 Powered industrial trucks - Visibility - Test method and verification - Part 6 : sit-on counterbalance trucks and rough terrain masted trucks greater than 10 000 kg capacity
NF EN 17038-1:2019 Pompes - Méthodes de qualification et de vérification de l'indice de rendement énergétique des groupes motopompes rotodynamiques - Partie 1 : exigences générales et procédures d'essai et de calcul de l'indice de rendement énergétique (EEI)
FD D25-116-1*FD CEN/TR 15356-1:2006 Validation and interpretation of analytical methods, migration testing and analytical data for materials and articles in contact with food - Part 1 : general considerations
NF ISO 22074-3:2021 Infrastructure ferroviaire - Systèmes de fixation du rail - Partie 3 : méthode d'essai de charge d'épreuve pour la résistance à l'arrachement
NF EN 13523-29:2017 Tôles prélaquées - Méthodes d'essai - Partie 29 : résistance à la pollution environnementale (salissures)
NF H96-324-2*NF EN ISO 18063-2:2021 Rough-terrain trucks - Visibility test methods and their verification - Part 2 : slewing rough-terrain variable-reach trucks
NF E44-406-1*NF EN 17038-1:2019 Pumps - Methods of qualification and verification of the Energy Efficiency Index for rotodynamic pump units - Part 1 : general requirements and procedures for testing and calculation of Energy Efficiency Index (EEI)
NF F50-050-10*NF EN 13146-10:2017 Railway applications - Track - Test methods for fastening systems - Part 10 : proof load test for pull-out resistance
NF EN 13523-5:2014 Tôles prélaquées - Méthodes d'essai - Partie 5 : résistance à la déformation rapide (essai de choc)
NF H96-312-4*NF EN 16842-4:2019 Powered industrial trucks - Visibility - Test methods and verification - Part 4 : industrial variable reach trucks up to and including 10 000 kg capacity
NF G62-020:1983 Footwear. Test methods. Determination of the resistance of laces to the cutting effect of accessories.
NF C93-537-3-15*NF EN 50289-3-15:2003 Communication cables - Specifications for test methods - Part 3-15 : mechanical test methods - Underwater cable resistance to hydrostatic pressure

British Standards Institution (BSI), Proficiency Testing Analysis Method

BS ISO 12828-2:2016 Validation methods for fire gas analyses. Intralaboratory validation of quantification methods
BS PD CEN/TS 17174:2018 Animal feeding stuffs: Methods of sampling and analysis. Performance criteria for single laboratory validated and ring-trial validated methods of analysis for the determination of heavy metals
PD ISO/TS 22176:2020 Cosmetics. Analytical methods. Development of a global approach for validation of quantitative analytical methods
PD CEN/TS 17455:2020 Animal feeding stuffs. Methods of sampling and analysis. Performance criteria for single laboratory validated and ring-trial validated methods of analysis for the determination of mycotoxins
BS PD CEN/TS 16800:2015 Guideline for the validation of physico-chemical analytical methods
BS PD CEN/TS 16800:2020 Guideline for the validation of physico-chemical analytical methods
PD ISO/TS 16393:2019 Molecular biomarker analysis. Determination of the performance characteristics of qualitative measurement methods and validation of methods
BS ISO 13528:2022 Statistical methods for use in proficiency testing by interlaboratory comparison
PD CEN ISO/TR 24094:2007 Analysis of natural gas. Validation methods for gaseous reference materials
BS ISO 7210:2013 Routine analytical cigarette-smoking machine. Additional test methods for machine verification
BS ISO 12787:2011 Cosmetics. Analytical methods. Validation criteria for analytical results using chromatographic techniques
BS ISO 12828-1:2011 Validation method for fire gas analysis. Limits of detection and quantification
BS EN 16842-1:2018 Powered industrial trucks. Visibility. Test methods and verification - General requirements
BS ISO 11726:2017 Tracked Changes. Solid mineral fuels. Guidelines for the validation of alternative methods of analysis
BS ISO 7210:2018 Tracked Changes. Routine analytical cigarette-smoking machine. Additional test methods for machine verification
BS EN 15305:2008 Non-destructive testing - Test method for residual stress analysis by X-ray diffraction
BS ISO 24190:2023 Biotechnology. Analytical methods. Risk-based approach for method selection and validation for rapid microbial detection in bioprocesses
BS EN 16842-10:2020 Powered industrial trucks. Visibility. Test methods and verification - Towing and Pushing tractors and Burden carrier
BS 3482-6:1991 Methods of test for desiccants - Determination of adsorptive capacity
BS ISO 14397-1:2007 Earth-moving machinery. Loaders and backhoe loaders. Calculation of rated operating capacity and test method for verifying calculated tipping load
BS ISO 14397-1:2007+A1:2019 Earth-moving machinery. Loaders and backhoe loaders. Calculation of rated operating capacity and test method for verifying calculated tipping load
20/30411208 DC BS ISO 8196-3. Milk. Definition and evaluation of the overall accuracy of alternative methods of milk analysis. Part 3. Protocol for the evaluation and validation of alternative quantitative methods of milk analysis
BS EN 16842-6:2018 Powered industrial trucks. Visibility. Test methods and verification - Sit-on counterbalance trucks and rough terrain masted trucks greater than 10 000 kg capacity
BS ISO 8196-3:2022 Tracked Changes. Milk. Definition and evaluation of the overall accuracy of alternative methods of milk analysis. Protocol for the evaluation and validation of alternative quantitative methods of milk analysis
22/30397817 DC BS ISO 24190. Biotechnology. Analytical Methods. Risk based approach for design and validation of methods for rapid microbial detection in bioprocesses
17/30367208 DC BS EN 17038-3. Pumps. Rotodynamic Pumps. Energy efficiency Index. Methods of qualification and verification - Part 3. Testing and calculation of energy efficiency index (EEI) of booster sets
BS EN 16842-8:2021 Powered industrial trucks. Visibility-Test methods and verification. Stand-on counterbalance trucks up to and including 10 000 kg capacity
18/30375118 DC BS EN 16842-10. Powered industrial trucks. Visibility. Test methods and verification. Part 10. Towing and Pushing tractors and Burden carrier
19/30392350 DC BS EN 16842-10. Powered industrial trucks. Visibility. Test methods and verification. Part 10. Towing and Pushing tractors and Burden carrier
BS EN ISO 21254-3:2011 Lasers and laser-related equipment. Test methods for laser-induced damage threshold. Assurance of laser power (energy) handling capabilities
BS EN 17038-2:2019 Pumps. Methods of qualification and verification of the Energy Efficiency Index for rotodynamic pump units - Testing and calculation of Energy Efficiency Index (EEI) of single pump units
BS 2782-3 Method 346A:1984 Methods of testing plastics - Mechanical properties - Determination of cohesion between layers of laminated tube
BS ISO 13564-1:2012 Powered industrial trucks. Test methods for verification of visibility. Sit-on and stand-on operator trucks and variable-reach trucks up to and including 10 t capacity
19/30392565 DC BS EN 16842-8. Powered industrial trucks. Visibility-test methods and verification. Part 8. Stand-on counterbalance trucks up to and including 10 000 kg capacity
BS EN ISO 18063-2:2021 Rough-terrain trucks. Visibility test methods and their verification. Slewing rough-terrain variable-reach trucks
BS 2782-8 Method 826A:1992 Methods of testing plastics - Other properties - Determination of adhesion of print on plastics sheet
BS EN 16842-3:2018 Powered industrial trucks. Visibility. Test methods and verification - Reach trucks up to and including 10 000 kg capacity
BS EN 17038-1:2019 Pumps. Methods of qualification and verification of the Energy Efficiency Index for rotodynamic pump units - General requirements and procedures for testing and calculation of Energy Efficiency Index (EEI)

European Committee for Standardization (CEN), Proficiency Testing Analysis Method

CEN/TS 17174:2018 Animal feeding stuffs: Methods of sampling and analysis - Performance criteria for single laboratory validated and ring-trial validated methods of analysis for the determination of heavy metals
PD CEN/TS 17174:2018 Animal feeding stuffs: Methods of sampling and analysis - Performance criteria for single laboratory validated and ring-trial validated methods of analysis for the determination of heavy metals
CEN/TR 16059:2010 Food analysis - Performance criteria for single laboratory validated methods of analysis for the determination of mycotoxins
PD CEN/TS 16800:2015 Guideline for the validation of physico-chemical analytical methods
PD CEN/TS 16800:2020 Guideline for the validation of physico-chemical analytical methods
EN ISO 16140-5:2020 Microbiology of the food chain - Method validation - Part 5: Protocol for factorial interlaboratory validation for non-proprietary methods (ISO 16140-5:2020)
EN ISO/TR 24094:2007 Analysis of natural gas - Validation methods for gaseous reference materials
CEN ISO/TR 24094:2007 Analysis of natural gas - Validation methods for gaseous reference materials
CEN/TR 10345:2013 Guideline for statistical data treatment of inter laboratory tests for validation of analytical methods
EN 16842-1:2018 Powered industrial trucks - Visibility - Test methods and verification - Part 1: General requirements
CEN/TR 10350:2013 Analysis of steels and irons - Internal laboratory procedure for checking the accuracy of an analytical method by using Certified Reference Materials
EN 16842-8:2021 Powered industrial trucks - Visibility-Test methods and verification - Part 8: Stand-on counterbalance trucks up to and including 10000 kg capacity
EN 1744-1:2009 Tests for chemical properties of aggregates - Part 1: Chemical analysis (Incorporates Amendment A1: 2012)
PD CEN/TR 10350:2009 Analysis of steels and irons - Internal laboratory procedure for checking the accuracy of an analytical method by using Certified Reference Materials
EN 13726-1:2002 Test methods for primary wound dressings - Part 1: Aspects of absorbency
EN 16842-10:2020 Powered industrial trucks - Visibility - Test methods and verification - Part 10: Towing and Pushing tractors and Burden carrier
EN 17038-2:2019/AC:2021 Pumps - Methods of qualification and verification of the Energy Efficiency Index for rotodynamic pump units - Part 2: Testing and calculation of Energy Efficiency Index (EEI) of single pump units
EN 16842-2:2018 Powered industrial trucks - Visibility - Test methods and verification - Part 2: Sit-on counterbalance trucks and rough terrain masted trucks up to and including 10 000 kg capacity
EN 16842-5:2021 Powered industrial trucks - Visibility - Test methods and verification - Part 5: Industrial variable-reach trucks greater than 10000 kg capacity
CEN/TR 15356-1:2006 Validation and interpretation of analytical methods, migration testing and analytical data for materials and articles in contact with food - Part 1: General considerations
EN 17038-1:2019/AC:2021 Pumps - Methods of qualification and verification of the Energy Efficiency Index for rotodynamic pump units - Part 1: General requirements and procedures for testing and calculation of Energy Efficiency Index (EEI)
EN ISO 18063-2:2021 Rough-terrain trucks - Visibility test methods and their verification - Part 2: Slewing rough-terrain variable-reach trucks (ISO 18063-2:2021)

German Institute for Standardization, Proficiency Testing Analysis Method

DIN CEN/TS 17174:2018-10*DIN SPEC 10796:2018-10 Animal feeding stuffs: Methods of sampling and analysis - Performance criteria for single laboratory validated and ring-trial validated methods of analysis for the determination of heavy metals; German version CEN/TS 17174:2018
DIN CEN/TS 17455:2020-07 Animal feeding stuffs - Methods of sampling and analysis - Performance criteria for single laboratory validated and ring-trial validated methods of analysis for the determination of mycotoxins; German version CEN/TS 17455:2020
DIN ISO 13528:2020-09 Statistical methods for use in proficiency testing by interlaboratory comparison (ISO 13528:2015, Corrected version 2016-10-15); Text in German and English
DIN CEN/TS 16800:2016-03*DIN SPEC 38402-61:2016-03 Guideline for the validation of physico-chemical analytical methods (CEN/TS 16800:2015); German version CEN/TS 16800:2015
DIN EN 16842-1:2018 Powered industrial trucks - Visibility - Test methods and verification - Part 1: General requirements
DIN EN 16842-1:2018-10 Powered industrial trucks - Visibility - Test methods and verification - Part 1: General requirements; German version EN 16842-1:2018
DIN ISO 7210:2020-06 Routine analytical cigarette-smoking machine - Additional test methods for machine verification (ISO 7210:2018)
DIN EN 15305 Berichtigung 1:2009 Non-destructive testing - Test method for residual stress analysis by X-ray diffraction; German version EN 15305:2008, Corrigendum to DIN EN 15305:2009-01; German version EN 15305:2008/AC:2009
DIN 10741:2010-08 Analysis of honey - General guidelines for the ad hoc validation of analysis methods for organic residues or contaminants
DIN 10741:2010 Analysis of honey - General guidelines for the ad hoc validation of analysis methods for organic residues or contaminants
DIN ISO 13528:2020 Statistical methods for use in proficiency testing by interlaboratory comparison (ISO 13528:2015, Corrected version 2016-10-15); Text in German and English
DIN ISO 7210:2020 Routine analytical cigarette-smoking machine - Additional test methods for machine verification (ISO 7210:2018)
DIN EN 16842-8:2021-04 Powered industrial trucks - Visibility - Test methods and verification - Part 8: Stand-on counterbalance trucks up to and including 10000 kg capacity; German version EN 16842-8:2021 / Note: Applies in conjunction with DIN EN 16842-1 (2018-10).
DIN EN 16842-3:2019 Powered industrial trucks - Visibility - Test methods and verification - Part 3: Reach trucks up to and including 10000 kg capacity
DIN EN 16842-3:2017 Powered industrial trucks - Visibility - Test method and verification - Part 3: Reach trucks up to and including 10000 kg; German and English version prEN 16842-3:2017
DIN EN 15305:2009-01 Non-destructive testing - Test method for residual stress analysis by X-ray diffraction; German version EN 15305:2008
DIN EN 15305 Berichtigung 1:2009-04 Non-destructive testing - Test method for residual stress analysis by X-ray diffraction; German version EN 15305:2008, Corrigendum to DIN EN 15305:2009-01; German version EN 15305:2008/AC:2009
DIN EN 16842-5:2021-04 Powered industrial trucks - Visibility - Test methods and verification - Part 5: Industrial variable-reach trucks greater than 10000 kg capacity; German version EN 16842-5:2021 / Note: Applies in conjunction with DIN EN 16842-1 (2018-10).
DIN EN 15305:2009 Non-destructive testing - Test method for residual stress analysis by X-ray diffraction; German version EN 15305:2008
DIN EN 17038-3:2018 Pumps - Rotodynamic Pumps - Energy efficiency Index - Methods of qualification and verification - Part 3: Testing and calculation of energy efficiency index (EEI) of booster sets; German and English version prEN 17038-3:3017
DIN EN 16842-10:2020-11 Powered industrial trucks - Visibility - Test methods and verification - Part 10: Towing and Pushing tractors and Burden carrier; German version EN 16842-10:2020 / Note: Applies in conjunction with DIN EN 16842-1 (2018-10).
DIN 38402-45:2014-06 German standard methods for the examination of water, waste water and sludge - General information (group A) - Part 45: Interlaboratory comparisons for proficiency testing of laboratories (A 45)
DIN EN 13146-10:2017-05 Railway applications - Track - Test methods for fastening systems - Part 10: Proof load test for pull-out resistance; German version EN 13146-10:2017
DIN 38402-51:1986 German standard methods for the examination of water, waste water and sludge; general information (group A); calibration of analytical methods, evaluation of analytical results and linear calibration functions used to determine the performance characteris
DIN EN 17038-2:2022-08 Pumps - Methods of qualification and verification of the Energy Efficiency Index for rotodynamic pump units - Part 2: Testing and calculation of Energy Efficiency Index (EEI) of single pump units; German version EN 17038-2:2019 + AC:2021
DIN EN 17038-2:2017 Pumps - Methods of qualification and verification of the Energy Efficiency Index for rotodynamic pumps units - Part 2: Testing and calculation of energy Efficiency Index (EEI) of single pump units; German and English version prEN 17038-2:2016
DIN EN 16842-2:2018 Powered industrial trucks - Visibility - Test methods and verification - Part 2: Sit-on counterbalance trucks and rough terrain masted trucks up to and including 10 000 kg capacity
DIN EN 16842-6:2019 Powered industrial trucks - Visibility - Test methods and verification - Part 6: Sit-on counterbalance trucks and rough terrain masted trucks greater than 10000 kg capacity
DIN EN 17038-1:2022-08 Pumps - Methods of qualification and verification of the Energy Efficiency Index for rotodynamic pump units - Part 1: General requirements and procedures for testing and calculation of Energy Efficiency Index (EEI); German version EN 17038-1:2019 + AC:...
DIN EN 16842-3:2019-06 Powered industrial trucks - Visibility - Test methods and verification - Part 3: Reach trucks up to and including 10000 kg capacity; German version EN 16842-3:2018 / Note: Applies in conjunction with DIN EN 16842-1 (2018-10).
DIN EN 16842-4:2017 Powered industrial trucks - Visibility - Test methods and verification - Part 4: Industrial variable reach trucks up to and including 10000 kg capacity; German and English version prEN 16842-4:2017
DIN EN 16842-4:2019 Powered industrial trucks - Visibility - Test methods and verification - Part 4: Industrial variable reach trucks up to and including 10 000 kg capacity
DIN EN 13523-5:2014-08 Coil coated metals - Test methods - Part 5: Resistance to rapid deformation (impact test); German version EN 13523-5:2014
DIN 38402-60:2013-12 German standard methods for the examination of water, waste water and sludge - General information (group A) - Part 60: Analytical quality assurance for chemical and physicochemical water analysis (A 60)
DIN EN 17038-2:2022 Pumps - Methods of qualification and verification of the Energy Efficiency Index for rotodynamic pump units - Part 2: Testing and calculation of Energy Efficiency Index (EEI) of single pump units (includes Corrigendum :2021)
DIN EN 16842-6:2017 Powered industrial trucks - Visibility - Test methods and verification - Part 6: Sit-on counterbalance trucks and rough terrain masted trucks greater than 10000 kg capacity; German and English version prEN 16842-6:2017
DIN EN 14865-1:2010 Railway applications - Axlebox lubricating greases - Part 1: Method to test the ability to lubricate; German version EN 14865-1:2009

司法部, Proficiency Testing Analysis Method

SF/T 0063-2020 General principles for validation of forensic toxicological analysis methods

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Proficiency Testing Analysis Method

ASHRAE SE-99-6-2-1999 Validation of Two French Building Energy Programs@ Part 1: Analytical Verification
ASHRAE SE-99-6-3-1999 Validation of Two French Building Energy Programs@ Part 2: Parameter Estimation Method Applied to Empirical Validation
ASHRAE AB-10-012-2010 A Comparative Analysis and Validation of Two DX Cooling Coil Modeling Methods
ASHRAE 51-2016 Laboratory Methods of Testing Fans for Certified Aerodynamic Performance Rating
ASHRAE HI-02-18-4-2002 An Analytical Verification Procedure for Testing the Ability of Whole-Building Energy Simulation Programs to Model Space Conditioning Equipment at Typical Design Conditions

ES-UNE, Proficiency Testing Analysis Method

UNE-CEN/TS 17455:2021 Animal feeding stuffs - Methods of sampling and analysis - Performance criteria for single laboratory validated and ring-trial validated methods of analysis for the determination of mycotoxins
UNE-CEN/TS 16800:2020 Guideline for the validation of physico-chemical analytical methods (Endorsed by Asociación Española de Normalización in February of 2021.)
UNE-CEN ISO/TR 24094:2012 IN Analysis of natural gas - Validation methods for gaseous reference materials (ISO/TR 24094:2006)
UNE-EN 16842-1:2019 Powered industrial trucks - Visibility - Test methods and verification - Part 1: General requirements
UNE-EN 16842-10:2021 Powered industrial trucks - Visibility - test methods and verification - Part 10: Towing and Pushing tractors and Burden carrier
UNE-EN 16842-8:2021 Powered industrial trucks - Visibility-test methods and verification - Part 8: Stand-on counterbalance trucks up to and including 10 000 kg capacity
UNE-EN 13146-10:2017 Railway applications - Track - Test methods for fastening systems - Part 10: Proof load test for pull-out resistance
UNE-EN 17038-2:2023 Pumps - Methods of qualification and verification of the Energy Efficiency Index for rotodynamic pump units - Part 2: Testing and calculation of Energy Efficiency Index (EEI) of single pump units
UNE-EN 16842-3:2019 Powered industrial trucks - Visibility - Test methods and verification - Part 3: Reach trucks up to and including 10 000 kg capacity
UNE-EN 16842-5:2021 Powered industrial trucks - Visibility - test methods and verification - Part 5: Industrial variable-reach trucks greater than 10 000 kg capacity
UNE-EN 17038-1:2023 Pumps - Methods of qualification and verification of the Energy Efficiency Index for rotodynamic pump units - Part 1: General requirements and procedures for testing and calculation of Energy Efficiency Index (EEI)
UNE-EN 16842-4:2019 Powered industrial trucks- Visibility - Test methods and verification - Part 4 : Industrial variable reach trucks up to and including 10 000 kg capacity

Danish Standards Foundation, Proficiency Testing Analysis Method

DS/CEN/TR 16059:2011 Food analysis - Performance criteria for single laboratory validated methods of analysis for the determination of mycotoxins
DS/CEN/TS 16800:2021 Guideline for the validation of physico-chemical analytical methods
DS/ISO 13528:2005 Statistical methods for use in proficiency testing by interlaboratory comparisons
DS/CEN ISO/TR 24094:2008 Analysis of natural gas - Validation methods for gaseous reference materials
DS/ISO 12787:2012 Cosmetics - Analytical methods - Validation criteria for analytical results using chromatographic techniques
DS/CEN/TR 10345:2008 Guideline for statistical data treatment of inter laboratory tests for validation of analytical methods
DS/ISO 12828-1:2012 Validation method for fire gas analysis - Part 1: Limits of detection and quantification
DS/ISO 7210:2013 Routine analytical cigarette-smoking machine - Additional test methods for machine verification
DS/CEN/TR 10350:2013 Analysis of steels and irons - Internal laboratory procedure for checking the accuracy of an analytical method by using Certified Reference Materials
DS/EN 16842-8:2021 Powered industrial trucks – Visibility-Test methods and verification – Part 8: Stand-on counterbalance trucks up to and including 10 000 kg capacity
DS-håndbog 147.1:2003 The IRP Methodology - A process-based method for project management as a corporate business competence - The Analysing Process
DS/EN 15305/AC:2009 Non-destructive Testing - Test Method for Residual Stress analysis by X-ray Diffraction
DS/EN 15305:2008 Non-destructive Testing - Test Method for Residual Stress analysis by X-ray Diffraction
DS/EN 17038-1:2021 Pumps – Methods of qualification and verification of the Energy Efficiency Index for rotodynamic pump units – Part 1: General requirements and procedures for testing and calculation of Energy Efficiency Index (EEI)
DS/CEN/TR 15356-1:2006 Validation and interpretation of analytical methods, migration testing and analytical data for materials and articles in contact with food - Part 1: General considerations
DS/ISO 22074-3:2021 Railway infrastructure – Rail fastening systems – Part 3: Proof load test method for pull-out resistance

CZ-CSN, Proficiency Testing Analysis Method

CSN 99 4179-1990 Grain testers. Methods of verification and calibrating

IT-UNI, Proficiency Testing Analysis Method

UNI CEN/TS 16800-2021 Guideline for the validation of physico-chemical analytical methods
UNI EN 16842-10-2020 Powered industrial trucks - Visibility - Test methods and verification - Part 10: Towing and Pushing tractors and Burden carrier
UNI EN 16842-5-2021 Powered industrial trucks - Visibility - Test methods and verification - Part 5: Industrial variable-reach trucks greater than 10 000 kg capacity
UNI EN 16842-8-2021 Powered industrial trucks - Visibility-Test methods and verification - Part 8: Stand-on counterbalance trucks up to and including 10 000 kg capacity

Lithuanian Standards Office , Proficiency Testing Analysis Method

LST CEN/TS 16800-2021 Guideline for the validation of physico-chemical analytical methods
LST EN 15305-2008 Non-destructive Testing - Test Method for Residual Stress analysis by X-ray Diffraction
LST EN 15305-2008/AC-2009 Non-destructive Testing - Test Method for Residual Stress analysis by X-ray Diffraction
LST EN 16842-10-2020 Powered industrial trucks - Visibility - Test methods and verification - Part 10: Towing and Pushing tractors and Burden carrier
LST EN 16842-5-2021 Powered industrial trucks - Visibility - Test methods and verification - Part 5: Industrial variable-reach trucks greater than 10 000 kg capacity
LST EN 16842-8-2021 Powered industrial trucks - Visibility-Test methods and verification - Part 8: Stand-on counterbalance trucks up to and including 10 000 kg capacity

未注明发布机构, Proficiency Testing Analysis Method

WS/T 514-2017 Establishment and verification of detection capability for clinical laboratory measurement procedures
BS PD CEN ISO/TR 24094:2007 Analysis of natural gas — Validation methods for gaseous reference materials
BS 6912-9:1992(1999) Safety of earth - moving machinery — Part 9 : Methods for the calculation and verification of the lift capacity of hydraulic excavators
BS EN 15305:2008(2009) Non - destructive Testing — Test Method for Residual Stress analysis by X - ray Diffraction
BS ISO 18063-1:2016(2018) Rough - terrain trucks — Visibility — Test methods and their verification Part 1 : Variable - reach trucks
BS 3482-6:1991(1999) Methods of test for Desiccants — Part 6 : Determination of adsorptive capacity
BS EN 17038-2:2019(2021) Pumps — Methods of qualification and verification of the Energy Efficiency Index for rotodynamic pump units Part 2 : Testing and calculation of Energy Efficiency Index (EEI) of single pump units
BS EN 17038-1:2019(2021) Pumps — Methods of qualification and verification of the Energy Efficiency Index for rotodynamic pump units Part 1 : General requirements and procedures for testing and calculation of Energy Efficiency Index (EEI)
BS EN 16842-9:2019(2020) Powered industrial trucks — Visibility — Test methods and verification Part 9 : Order - picking, lateral - and front - stacking trucks with elevating operator position

International Organization for Standardization (ISO), Proficiency Testing Analysis Method

ISO/TS 22176:2020 Cosmetics — Analytical methods — Development of a global approach for validation of quantitative analytical methods
ISO 12828-2:2016 Validation methods for fire gas analyses - Part 2: Intralaboratory validation of quantification methods
ISO/IEC Guide 43-1:1997 Proficiency testing by interlaboratory comparisons - Part 1: Development and operation of proficiency testing schemes
ISO 13528:2022 Statistical methods for use in proficiency testing by interlaboratory comparison
ISO 10191:2021 Passenger car tyres — Verifying tyre capabilities — Laboratory test methods
ISO/TS 16393:2019 Molecular biomarker analysis — Determination of the performance characteristics of qualitative measurement methods and validation of methods
ISO/IEC Guide 43-2:1997 Proficiency testing by interlaboratory comparisons - Part 2: Selection and use of proficiency testing schemes by laboratory accreditation bodies
ISO 16140-5:2020 Microbiology of the food chain — Method validation — Part 5: Protocol for factorial interlaboratory validation for non-proprietary methods
ISO 7210:2013 Routine analytical cigarette-smoking machine - Additional test methods for machine verification
ISO/PRF TS 7013 Water quality — Guidance and requirements for designing an interlaboratory trial for validation of analytical methods
ISO/TS 7013:2023 Water quality — Guidance and requirements for designing an interlaboratory trial for validation of analytical methods
ISO/TS 12828-3:2020 Validation method for fire gas analysis — Part 3: Considerations related to interlaboratory trials
ISO 16300-3:2017 Automation systems and integration - Interoperability of capability units for manufacturing application solutions - Part 3: Verification and validation of interoperability among capability units
ISO/DIS 11781:2023 Molecular biomarker analysis — General guidelines for single-laboratory validation of qualitative real-time PCR methods
ISO 8196-3:2009 Milk - Definition and evaluation of the overall accuracy of alternative methods of milk analysis - Part 3: Protocol for the evaluation and validation of alternative quantitative methods of milk analysis
ISO 8196-3:2009|IDF 128-3:2009 Definition and evaluation of the overall accuracy of methods for quantification of variation in milk analysis Part 3: Methods for the evaluation and validation of methods for quantification of variation in milk analysis
ISO 9186-2:2008 Graphical symbols - Test methods - Part 2: Method for testing perceptual quality
ISO 18063-1:2016 Rough-terrain trucks - Visibility - Test methods and their verification - Part 1: Variable-reach trucks
ISO 8196-3:2022 Milk — Definition and evaluation of the overall accuracy of alternative methods of milk analysis — Part 3: Protocol for the evaluation and validation of alternative quantitative methods of milk analys
ISO/FDIS 24190 Biotechnology — Analytical methods — Risk-based approach for method selection and validation for rapid microbial detection in bioprocesses
ISO 8196-3:2022 | IDF 128-3 Milk — Definition and evaluation of the overall accuracy of alternative methods of milk analysis — Part 3: Protocol for the evaluation and validation of alternative quantitative methods of milk analysis
ISO 8196-3:2009 | IDF 128-3:2009 Milk — Definition and evaluation of the overall accuracy of alternative methods of milk analysis — Part 3: Protocol for the evaluation and validation of alternative quantitative methods of milk analysis
ISO 8196-3:2022 | IDF 128-3:2022 Milk — Definition and evaluation of the overall accuracy of alternative methods of milk analysis — Part 3: Protocol for the evaluation and validation of alternative quantitative methods of milk analysis
ISO 21254-3:2011 Lasers and laser-related equipment - Test methods for laser-induced damage threshold - Part 3: Assurance of laser power (energy) handling capabilities
ISO 24190:2023 Biotechnology — Analytical methods — Risk-based approach for method selection and validation for rapid microbial detection in bioprocesses
ISO 14397-1:2007/Amd 1:2019 Earth-moving machinery — Loaders and backhoe loaders — Part 1: Calculation of rated operating capacity and test method for verifying calculated tipping load — Amendment 1
ISO 7404-5:1984 Methods for the petrographic analysis of bituminous coal and anthracite; Part 5 : Method of determining microscopically the reflectance of vitrinite
ISO 18063-2:2021 Rough-terrain trucks - Visibility test methods and their verification - Part 2: Slewing rough-terrain variable-reach trucks

TH-TISI, Proficiency Testing Analysis Method

TIS 5043.1-1997 Proficiency testing by interlaboratory comparisons.part 1: development and operation of proficiency testing schemes
TIS 2510.1-2010 Determination of the ultimate aerobic biodegrability of plastics under controlled composting conditions.method by analysis of evolved carbon dioxide.part 1: general method

Shanxi Provincial Standard of the People's Republic of China, Proficiency Testing Analysis Method

DB14/T 2798-2023 Specification for verification of chemical analysis methods in testing laboratories
DB1404/T 18-2021 Inspection and testing laboratory instrument analysis method validation requirements Spectroscopy
DB1404/T 17-2021 Inspection and testing laboratory instrument analytical method validation requirements chromatography

Korean Agency for Technology and Standards (KATS), Proficiency Testing Analysis Method

KS A ISO/IEC GUIDE 43-1-2002(2012) Proficiency testing by interlaboratory comparisons－Part 1：Development and operation of proficiency testing schemes by laboratory accreditation bodies
KS A ISO/IEC GUIDE 43-2-2002(2012) Proficiency testing by interlaboratory comparisons－Part 2：Selection and use of proficiency testing schemes by laboratory accreditation bodies
KS I ISO 24094-2010(2016) Analysis of natural gas－Validation methods for gaseous reference materials
KS E ISO 11726:2018 Solid mineral fuels — Guidelines for the validation of alternative methods of analysis
KS I ISO 24094-2010(2021) Analysis of natural gas－Validation methods for gaseous reference materials
KS M ISO 12787:2014 Cosmetics — Analytical methods — Validation criteria for analytical results using chromatographic techniques
KS M ISO 12787-2014(2019) Cosmetics — Analytical methods — Validation criteria for analytical results using chromatographic techniques
KS H ISO 7210:2019 Routine analytical cigarette-smoking machine — Additional test methods for machine verification
KS M 3706-2008 Testing method for linear thermal expansion coefficient of plastics by thermomechanical analysis
KS S ISO 9186-2:2009 Graphical symbols－Test methods－Part 2：Method for testing perceptual quality
KS B ISO 14397-1-2015(2020) Earth-moving machinery－Loaders and backhoe loaders－Part 1：Calculation of rated operating capacity and test method for verifying calculated tipping load
KS X ISO/IEC TR 14143-3-2005(2020) Information technology－Software measurement?Functional size measurement－Part 3：Verification of functional size measurement methods

ZA-SANS, Proficiency Testing Analysis Method

SANS 13528:2009 Statistical methods for use in proficiency testing by interlaboratory comparisons

RU-GOST R, Proficiency Testing Analysis Method

GOST R 50779.60-2017 Statistical methods for use in proficiency testing by interlaboratory comparison
GOST R 8.729-2010 State system for ensuring the uniformity of measurements. Analytical gas laboratory chromatographs. Verification procedure
GOST ISO 12787-2016 Perfumery and cosmetics. Analytical methods. Validation criteria for analytical results using chromatographic techniques
GOST 8.485-2013 State system for ensuring the uniformity of measurements. Analytical gas laboratory chromatographs. Verification procedure
GOST R 8.722-2010 State system for ensuring the uniformity of measurements. Conductometric liquid analyses. Verification procedure
GOST 8.624-2013 State system for ensuring the traceability of measurements. Laboratory water in crude oil analyzers. Verification method
GOST R 8.772-2011 State system for ensuring the uniformity of measurements. Analytical liquid laboratory chromatographs. The method of verification
GOST 8.485-1983 State system for ensuring the uniformity of measurements. Analitical gas laboratory chromatographs. Methods and means of verification

American Society of Mechanical Engineers (ASME), Proficiency Testing Analysis Method

ASME STP-PT-022-2008 COMPARISON AND VALIDATION OF CREEP-BUCKLING ANALYSIS METHODS

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Proficiency Testing Analysis Method

GB/T 8117.3-2014 Rules for steam turbine thermal acceptance test.Part 3:Method C.Thermal performance verification tests of retrofitted steam turbines
GB/T 28043-2011 Statistical methods for use in proficiency testing by interlaboratory comparisons
GB/T 32465-2015 Requirements for verification & validation of detection methods and internal quality control on chemical analysis
GB/T 17802-1999 Thermal analysis test methods for kinetic constants of combustible materials
GB/T 32467-2015 Verification and validation of methods and internal quality contorl on chemical analysis.Terms and definitions
GB/T 17802-2011 Thermal analysis test methods for Arrhenius kinetics constants of thermally unstable materials
GB/T 13465.1-2014 Test method of impermeable graphite materials.Part 1:General of test method for mechanical properties
GB/T 22638.11-2023 Aluminum Foil Test Methods Part 11: Tests for Mechanical Properties
GB/T 5137.1-2002 Road vehicles-safety glazing materials--Test methods for mechanical properties
GB/T 18491.3-2010 Information technology.Software measurement.Functional size measurement.Part 3:Verification of functional size measurement methods

国家市场监督管理总局、中国国家标准化管理委员会, Proficiency Testing Analysis Method

GB/T 28043-2019 Statistical methods for use in proficiency testing by interlaboratory comparison
GB/T 40681.6-2021 Statistical methods in monitoring process capability and performance—Part 6：Process capability statistics for characteristics following a multivariate normal distribution
GB/T 5137.1-2020 Test methods of safety glazing materials used on road vehicles—Part 1: Mechanical properties tests
GB/T 40396-2021 Test method for glass transition temperature of polymer matrix composites—Dynamic mechanical analysis（DMA）
GB/T 40283.3-2021 Automation systems and integration—Interoperability of capability units for manufacturing application solutions—Part 3:Verification and validation of interoperability among capability units

Professional Standard - Agriculture, Proficiency Testing Analysis Method

361药典三部-2020 Guideline 9101 Guidelines for Validation of Analytical Methods
334药典四部-2020 9000 Guidelines 9101 Guidelines for Validation of Analytical Methods
CNAS-TRL-011-2020 Guidelines for Validation and Validation of Chemical Analysis Methods for Light Industrial Products
GB 5009.295-2023 General rules for validation of national food safety standards chemical analysis methods
1833药典一部-2010 Appendix XVIII A Guidelines for Validation of Analytical Methods for Quality Standards of Traditional Chinese Medicine
2408药典二部-2010 Appendix XXIX A Guidelines for Validation of Analytical Methods for Drug Quality Standards
SN/T 5326.5-2023 Guidelines for Validation of Professional Analytical Methods for Import and Export of Food and Cosmetics Part 5: Immunological Methods
328药典四部-2020 9000 Guidelines 9012 Guidelines for Validation of Quantitative Analysis Methods of Biological Samples
313药典四部-2015 9000 Guidelines 9012 Guidelines for Validation of Quantitative Analysis Methods of Biological Samples
317药典四部-2015 9000 Guiding Principles 9101 Guiding Principles for Validation of Analytical Methods for Pharmaceutical Quality Standards
农业部630号公告-11-2006 Technical guidelines for validation of analytical methods for quality control of veterinary chemicals
农业部630号公告-6-2006 Guiding principles for verification of analytical methods for quality standards of traditional Chinese medicines and natural medicines for veterinary use
330药典三部-2015 Technical Guide 9101 General Principles of Validation Guidelines for Analytical Methods of Pharmaceutical Quality Standards 213
878兽药典一部-2015 Appendix Contents 9000 Guidelines 9101 Guidelines for Validation of Analytical Methods for Quality Standards of Veterinary Drugs
GB 31604.59-2023 National Food Safety Standard General Principles for Validation of Chemical Analysis Methods for Food Contact Materials and Products
844兽药典二部-2015 Appendix Contents 9000 Guiding Principles 9011 Guiding Principles for Verification of Analytical Methods for Veterinary Traditional Chinese Medicine Quality Standards

Professional Standard - Certification and Accreditation, Proficiency Testing Analysis Method

RB/T 190-2015 Validation procedures for chemical analysis methods of gold in chemical mines

KR-KS, Proficiency Testing Analysis Method

KS E ISO 11726-2018 Solid mineral fuels — Guidelines for the validation of alternative methods of analysis
KS H ISO 7210-2019 Routine analytical cigarette-smoking machine — Additional test methods for machine verification

未注明发布机构, Proficiency Testing Analysis Method

WS/T 514-2017 Establishment and verification of detection capability for clinical laboratory measurement procedures
BS PD CEN ISO/TR 24094:2007 Analysis of natural gas — Validation methods for gaseous reference materials
BS 6912-9:1992(1999) Safety of earth - moving machinery — Part 9 : Methods for the calculation and verification of the lift capacity of hydraulic excavators
BS EN 15305:2008(2009) Non - destructive Testing — Test Method for Residual Stress analysis by X - ray Diffraction
BS ISO 18063-1:2016(2018) Rough - terrain trucks — Visibility — Test methods and their verification Part 1 : Variable - reach trucks
BS 3482-6:1991(1999) Methods of test for Desiccants — Part 6 : Determination of adsorptive capacity
BS EN 17038-2:2019(2021) Pumps — Methods of qualification and verification of the Energy Efficiency Index for rotodynamic pump units Part 2 : Testing and calculation of Energy Efficiency Index (EEI) of single pump units
BS EN 17038-1:2019(2021) Pumps — Methods of qualification and verification of the Energy Efficiency Index for rotodynamic pump units Part 1 : General requirements and procedures for testing and calculation of Energy Efficiency Index (EEI)
BS EN 16842-9:2019(2020) Powered industrial trucks — Visibility — Test methods and verification Part 9 : Order - picking, lateral - and front - stacking trucks with elevating operator position

AGMA - American Gear Manufacturers Association, Proficiency Testing Analysis Method

90FTM2-1990 An Industrial Approach for Load Capacity Calculation of Worm Gears (Verifying and Design)

工业和信息化部, Proficiency Testing Analysis Method

JB/T 12992.2-2018 Measurement and Verification Methods for Energy Savings in Motor Systems Part 2: Measurement and Verification Methods for Energy Savings in Pump Systems
JB/T 12992.1-2018 Measurement and verification method of energy saving of electric motor system Part 1: On-site energy efficiency test method of electric motor
JB/T 7945.1-2018 Test methods for mechanical properties of gray cast iron Part 1: Tensile test
JB/T 7945.2-2018 Test methods for mechanical properties of gray cast iron Part 2: Bending test
YD/T 3022.1-2016 Test methods for mechanical properties of communication optical cables Part 1: Sheath pull-out force

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Proficiency Testing Analysis Method

GB/T 27417-2017 Conformity assessment—Guidance on validation and verification of chemical analytical methods
GB/T 35655-2017 Guideline for verification and validation of chemical analysis method and internal quality control—Chromatography
GB/T 34867.1-2017 Procedures for measurement and verification of motor-system energy-savings—Part 1: Test procedures on working site for energy efficiency of motor
GB/T 35656-2017 Guideline for verification and validation of chemical analysis method and internal quality control—Method on reporting qualitative test reports
GB/T 35657-2017 Guideline for verification and validation of chemical analysis method and internal quality control－Metal component analysis based on sample digestion
GB/T 8117.4-2017 Rules for steam turbine thermal acceptance test—Part 4: Method D—Simplified performance test rules for steam turbine and its thermal cycle

American National Standards Institute （ANSI), Proficiency Testing Analysis Method

ANSI/ASTM E2489:2011 Practice for Statistical Analysis of One-Sample and Two-Sample Interlaboratory Proficiency Testing Programs
ANSI/ASHRAE 51-2016 Laboratory Methods of Testing Fans for Certified Aerodynamic Performance Rating
ANSI/AMCA 210/ASHRAE51-2007 Laboratory Methods of Testing Fans for Certified Aerodynamic Performance Rating
ANSI/ASHRAE 140-2007 Method of Test for the Evaluation of Building Energy Analysis Computer Programs

Group Standards of the People's Republic of China, Proficiency Testing Analysis Method

T/CECPA 002-2020 Evaluation and Validation Method for Nuclear Power Design and Safety Analysis Software
T/NBPIA 005.1-2021 Test methods for performance parameters of dialyzer — Part 1: Sieving coefficient
T/NBPIA 005.6-2021 Test methods for performance parameters of dialyzer Part 6: Blood compartment volume
T/NBPIA 005.2-2021 Test methods for performance parameters of dialyzer Part 2: Ultrafiltration coefficient
T/NBPIA 005.3-2021 Test methods for performance parameters of dialyzer Part 3: clearance
T/NBPIA 005.5-2021 Test methods for performance parameters of dialyzer Part 5: Total solute removal
T/NBPIA 005.4-2021 Test methods for performance parameters of dialyzer Part 4: solute reduction ratio
T/SIA 023.2-2021 Service capability maturity for Secondary-Level node of identification and resolution system of industrial internet—Part2: Assessment method
T/SIA 024.2-2021 Service capability maturity for Enterprise node of identification and resolution system of industrial internet—Part2: Assessment method
T/SIA 022.2-2021 Service capability maturity for Top-Level node of identification and resolution system of industrial internet—Part2: Assessment method

WRC - Welding Research Council, Proficiency Testing Analysis Method

BULLETIN 308-1985 VERIFICATION AND APPLICATION OF AN INELASTIC ANALYSIS METHOD FOR LMFBR PIPING SYSTEM

American Welding Society (AWS), Proficiency Testing Analysis Method

WRC 308:1985 Verification and Application of an Inelastic Analysis Method for LMFBR Piping System

Professional Standard - Machinery, Proficiency Testing Analysis Method

JB/T 7704.4-1995 Test method for electroplating solution Dispensability test
JB/T 7046-2006 Hydraulic fluid power Accumulators Verify methods of rated fatigue pressure and rated static pressure of pressure-containing envelopes
JB/T 7046-1993 Verification method of rated fatigue pressure and rated static pressure of pressure chamber of hydraulic accumulator
JB/T 6580.2-2014 Open front mechanical power press.Part 2: Performance requirement and testing methods

CU-NC, Proficiency Testing Analysis Method

NC 90-18-06-1988 Standards System for Metrological Assurance. Gamma Radiation Sources. Exposure Power Measures. Methods and Means of Verification
NC 90-08-05-1984 Metrological Assurance. Portable Standard Dynamometers 3. Categors

Standard Association of Australia （SAA）, Proficiency Testing Analysis Method

AS 2434.3:2002 Methods for the analysis and testing of lower rank coal and its chars - Lower rank coal - Determination of the moisture holding capacity
AS ISO 16100.2:2004(R2015)
AS 3580.19:2020 Methods for sampling and analysis of ambient air, Method 19: Ambient air quality data validation and reporting
AS ISO 14397.1:2021 Earth-moving machinery — Loaders and backhoe loaders, Part 1: Calculation of rated operating capacity and test method for verifying calculated tipping load

海关总署, Proficiency Testing Analysis Method

SN/T 5326.2-2020 Guidelines for Validation of Professional Analytical Methods for Imported and Exported Food and Cosmetics Part 2: Chemical Methods
SN/T 5326.3-2020 Validation Guidelines for Professional Analytical Methods for Imported and Exported Food and Cosmetics Part 3: Traditional Microbiological Methods
SN/T 5326.1-2020 Guidelines for Validation of Professional Analytical Methods for Import and Export of Food and Cosmetics Part 1: General Guidelines

GB-REG, Proficiency Testing Analysis Method

REG NACA-TR-739-1942 Shear Lag in Box Beams Methods of Analysis and Experimental Investigations

国家市场监督管理总局, Proficiency Testing Analysis Method

RB/T 063-2021 Verification and validation requirements for management and technical capability evaluation methods of inspection and testing institutions
RB/T 060.4-2021 Forensic Authentication/Forensic Science Proficiency Testing Implementation Guide Part 4: Document Authentication
RB/T 060.2-2021 Forensic Identification/Forensic Science Proficiency Testing Implementation Guide Part 2: Forensic Clinical Identification
RB/T 060.3-2021 Forensic Identification/Forensic Science Proficiency Testing Implementation Guide Part 3: Forensic Toxicology Identification
RB/T 060.1-2021 Forensic Identification/Forensic Science Proficiency Testing Implementation Guide Part 1: Forensic Pathology Identification
RB/T 060.5-2021 Implementation Guidelines for Forensic Identification/Forensic Science Proficiency Testing Part 5: Identification of Audiovisual Materials
RB/T 060.6-2021 Implementation Guidelines for Forensic Identification/Forensic Science Proficiency Testing Part 6: Vehicle Speed Identification in Road Traffic Accidents

AENOR, Proficiency Testing Analysis Method

UNE-ISO 7210:2015 Routine analytical cigarette-smoking machine. Additional test methods for machine verification
UNE-ISO 14397-1:2008 Earth-moving machinery -- Loaders and backhoe loaders -- Part 1: Calculation of rated operating capacity and test method for verifying calculated tipping load
UNE-EN 15305:2010 Non-destructive Testing - Test Method for Residual Stress analysis by X-ray Diffraction

YU-JUS, Proficiency Testing Analysis Method

JUS C.A1.124-1991 Metho?s of cbemlcal analysis of lead and lead a1Joys. Detc.rminat ion of oxi?ationliability
JUS B.H8.331-1985 Methods of analysis of coal and coke. Determlnation of caking power — Gray—King coke test

Fujian Provincial Standard of the People's Republic of China, Proficiency Testing Analysis Method

DB35/T 110-2000 Electron probe and scanning electron microscope X-ray energy spectrum analysis method for paint physical evidence detection

Japanese Industrial Standards Committee (JISC), Proficiency Testing Analysis Method

JIS C 3216-6:2011 Winding wires -- Test methods -- Part 6: Thermal properties
JIS C 3216-6:2019 Winding wires -- Test methods -- Part 6: Thermal properties

Military Standard of the People's Republic of China-General Armament Department, Proficiency Testing Analysis Method

GJB 771.302-1994 Test methods for gunpowder performance, closed explosive device test, differential pressure method
GJB 8671.9-2015 Test methods for metal cartridges Part 9: Mechanical property tests
GJB 8684.15-2015 Pyrotechnic performance test methods Part 15: Visible light total shielding ability test
GJB 8684.17-2015 Pyrotechnic powder performance test methods Part 17: Determination of millimeter wave attenuation capability
GJB 8684.5-2015 Pyrotechnic powder performance test methods Part 5: Pressure sensor method for specific volume determination

Professional Standard - Post and Telecommunication, Proficiency Testing Analysis Method

YD/T 3248.3-2017 Installation performance test methods for telecommunication optical fibre cables.Part 3: Microduct route verification
YD/T 3248.1-2017 Installation performance test methods for telecommunication optical fibre cables.Part 1: Microduct inner clearance verification

PL-PKN, Proficiency Testing Analysis Method

PN-EN 16842-10-2021-01 E Powered industrial trucks -- Visibility -- Test methods and verification -- Part 10: Towing and Pushing tractors and Burden carrier
PN-EN 16842-5-2021-06 E Powered industrial trucks -- Visibility -- Test methods and verification -- Part 5: Industrial variable-reach trucks greater than 10 000 kg capacity

Professional Standard - Aviation, Proficiency Testing Analysis Method

HB 5351.7-2004 Test method for properties of investment casting slurry-Part 7:The torque balance sedimentation analytical method for the determination of refractory powder granularity
HB 5434.4-2004 Test methods for aircraft wheel friction materials-Part 4:Dynamometer test method for brake performance

GOSTR, Proficiency Testing Analysis Method

GOST R 8.771-2011 State system for ensuring the uniformity of measurements. Analytical gas laboratory chromatographs. The method of verification
PNST 436-2020 Smart manufacturing. Interoperability of capability units for manufacturing application solutions. Part 3. Verification and validation of interoperability among capability units

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, Proficiency Testing Analysis Method

GJB 5384.15-2005 Test methods of performance for pyrotechnic composition Part 15: Total obscuring potency test for smoke in visible region
GJB 5491.33-2005 Test method of terminally guided projectile Part 33:Windproof ability test
GJB 6239.6-2008 Test method of impregnated activated carbon for military. Part 6: Chromium content. Chemical analysis method
GJB 6239.7-2008 Test method of impregnated activated carbon for military. Part 7: Ammonia content. Chemical analysis method
GJB 5384.17-2005 Test methods of performance for pyrotechnic composition Part 17: Performance determination of millimeter wavelength attenuation
GJB 2241.3-2006 Test method of performance for pulsed laser rangefinders Part 3: Test of angle discrimination, range discrimination and multic target designate function
GJB 5496.14-2005 Test method of aerial bomb Part 14:Performance test on ground－Explosion power
GJB 5384.5-2005 Test methods of performance for pyrotechnic composition Part 5: Determination of specific volume. Pressure sensor method

农业农村部, Proficiency Testing Analysis Method

NY/T 3151-2017 Guidelines for the Development and Validation of Analytical Methods for Chemical Pesticides in Soil and Water for Pesticide Registration

CEN - European Committee for Standardization, Proficiency Testing Analysis Method

PREN 17038-3-2017 Pumps - Rotodynamic Pumps - Energy efficiency Index - Methods of qualification and verification - Part 3: Testing and calculation of ener-gy efficiency index (EEI) of booster sets
EN 16842-3:2018 Powered industrial trucks - Visibility - Test methods and verification - Part 3: Reach trucks up to and including 10 000 kg capacity
PREN 16842-10-2018 Powered industrial trucks - Visibility - test methods and verification - Part 10: Towing and Pushing tractors and Burden carrier
PREN 16842-10-2019 Powered industrial trucks - Visibility - test methods and verification - Part 10: Towing and Pushing tractors and Burden carrier
EN 17038-2:2019 Pumps - Methods of qualification and verification of the Energy Efficiency Index for rotodynamic pump units - Part 2: Testing and calculation of Energy Efficiency Index (EEI) of single pump units
PREN 17038-2-2016 Pumps - Methods of qualification and verification of the Energy Efficiency Index for rotodynamic pumps units - Part 2: Testing and calculation of energy Efficiency Index (EEI) of single pump units
EN 16842-6:2018 Powered industrial trucks - Visibility - Test methods and verification - Part 6: Sit-on counterbalance trucks and rough terrain masted trucks greater than 10 000 kg capacity
PREN 17038-1-2016 Pumps - Methods of qualification and verification of the Energy Efficiency Index for rotodynamic pumps units - Part 1: General requirements and procedures for testing and calculation of energy efficiency index (EEI)
EN 17038-1:2019 Pumps - Methods of qualification and verification of the Energy Efficiency Index for rotodynamic pump units - Part 1: General requirements and procedures for testing and calculation of Energy Efficiency Index (EEI)
EN 16842-4:2019 Powered industrial trucks - Visibility - Test methods and verification - Part 4: Industrial variable reach trucks up to and including 10 000 kg capacity
PREN 16842-4-2017 Powered industrial trucks- Visibility - Test methods and verification - Part 4 : Industrial variable reach trucks up to and including 10 000 kg capacity

Indonesia Standards, Proficiency Testing Analysis Method

SNI 7389.3-2009

Professional Standard - Aerospace, Proficiency Testing Analysis Method

QJ 1385A-2006 Analysis Method of Warhead Flight Mechanics Results of Surface-to-Surface Missile Flight Test
QJ 1385-1988 Analysis Method of Warhead Flight Mechanics Results of Surface-to-Surface Missile Flight Test

IN-BIS, Proficiency Testing Analysis Method

Shanghai Provincial Standard of the People's Republic of China, Proficiency Testing Analysis Method

DB31/T 668.14-2015 Energy savings measurement and verification method for energy conservation technical retrofit and EPC project.Part 14:Motor

AT-ON, Proficiency Testing Analysis Method

OENORM EN 16842-10-2021 Powered industrial trucks - Visibility - Test methods and verification - Part 10: Towing and Pushing tractors and Burden carrier
OENORM EN 17038-2-2021 Pumps - Methods of qualification and verification of the Energy Efficiency Index for rotodynamic pump units - Part 2: Testing and calculation of Energy Efficiency Index (EEI) of single pump units (consolidated version)

国家药监局, Proficiency Testing Analysis Method

YY/T 1789.5-2023 Methods for performance evaluation of in vitro diagnostic test systems Part 5: Analytical specificity

国家能源局, Proficiency Testing Analysis Method

NB/T 10523.1-2021 Test methods for mechanical properties of drum shearers Part 1: Laboratory tests

Jilin Provincial Standard of the People's Republic of China, Proficiency Testing Analysis Method

DB22/T 397.10-2017 Functional evaluation procedures and testing methods of health care products Part 10: Functional testing methods for aiding physical fatigue relief

US-CFR-file, Proficiency Testing Analysis Method

CFR 40-141.852-2014 Protection of Environment. Part141:National primary drinking water regulations. Section141.852:Analytical methods and laboratory certification.

API - American Petroleum Institute, Proficiency Testing Analysis Method

API PUBL 4381-1983 Evaluation of New Versions of the Empirical Kinetic Modeling Approach (EKMA) Development of a Statistical Methodology for Control Strategy Analysis (Out of Print)

Professional Standard - Public Safety Standards, Proficiency Testing Analysis Method

GA/T 823.3-2018 Methods of Examination of Paint Evidence in Forensic Science Part 3: Scanning Electron Microscopy/X-ray Spectroscopy

BE-NBN, Proficiency Testing Analysis Method

NBN C 06-201-1977

Professional Standard - Coal, Proficiency Testing Analysis Method

MT/T 593.2-2011 Artificial frozen soil physics mechanics performance test.Part 2:Soil frost heave test method
MT/T 593.2-1996 Physical and Mechanical Properties Tests of Artificial Frozen Soil Part 2: Soil Frost Heave Test Method
MT/T 593.3-2011 Artificial frozen soil physics mechanics performance test.Part 3:Consolidation under hydrostatic pressure for artificial frozen soil test method
MT/T 593.3-1996 Physical and Mechanical Properties Test of Artificial Frozen Soil Part 3: Consolidation Test Method of Artificial Frozen Soil Under Hydrostatic Pressure

BELST, Proficiency Testing Analysis Method

STB 8048-2015 System for ensuring the uniformity of measurements of the Republic of Belarus. Analyzers of consecutive action spectrum. Methods of verification

Professional Standard - Commodity Inspection, Proficiency Testing Analysis Method

SN/T 1731.12-2014 Safety performame test for pyrotechnic composition used for export fireworks and firecracker.Part 12:Time-Pressure test