ZH
RU
ES

Impedance test range

Impedance test range, Total:499 items.

In the international standard classification, Impedance test range involves: Welding, brazing and soldering, Components and accessories for telecommunications equipment, Rectifiers. Convertors. Stabilized power supply, Rubber, Explosion protection, Elements of buildings, Products of the chemical industry, Measurement of volume, mass, density, viscosity, Materials and components for railway engineering, Telecommunication systems, Lamps and related equipment, Electrical and electronic testing, Construction materials, Protection of and in buildings, Electricity. Magnetism. Electrical and magnetic measurements, Semiconductor devices, Noise with respect to human beings, Acoustics and acoustic measurements, Paper and board, Surface treatment and coating, Electrical engineering in general, Protection against fire, Electromagnetic compatibility (EMC), Aerosol containers, Electrical accessories, Reinforced plastics, Equipment for the chemical industry, Gas and steam turbines. Steam engines, Electronic tubes, Materials for aerospace construction, Electric filters, Automatic controls for household use, Kitchen equipment, Products of the textile industry, Transformers. Reactors, Non-destructive testing, Analytical chemistry, Metrology and measurement in general, Measurement of force, weight and pressure, Components for electrical equipment, Rotating machinery, Magnetic materials, Paint coating equipment, Petroleum products in general, Earthworks. Excavations. Foundation construction. Underground works, Optical equipment, Adhesives, Insulation, Telecommunications in general, Aids for disabled or handicapped persons, Audio, video and audiovisual engineering, Hydraulic fluids, Electromechanical components for electronic and telecommunications equipment, Construction of railways, Footwear, Aerospace electric equipment and systems, Road vehicle systems, Installations in buildings, Particle size analysis. Sieving, Raw materials for rubber and plastics, Tyres, Road vehicles in general, Fuels, Environmental protection, Agricultural machines, implements and equipment, Continuous handling equipment, Corrosion of metals, Wastes, Lubricants, industrial oils and related products, Graphic technology, Veterinary medicine.

CZ-CSN, Impedance test range

CSN 62 1459-1958
CSN 34 5615 Z3-1997
CSN 64 0781-1983 Plastics. ethods of resistance test gainst mildews.
CSN 34 7010 Cast.40-1973 Ozone resistance test and discharge resistance test (U-bend test)
CSN 34 5615 Z4-1998
CSN 77 0335-1980 Containers for aerosols. Method for testing the resistance against inner overpressure
CSN 49 0162 Cast.2-1985 Testing of properties of particleboards. Density. Testing method for density rangc in board area
CSN ISO 6508:1993 Metallic materials. Hardness test. Rockwell test (Scales A-B-C-D-E-F-G-H-K)
CSN 34 6412-1985 Testing methods of electrical insulating materials.Determination of resistance of electrical materials against moulds measured by surface electrical resistivity

Association Francaise de Normalisation, Impedance test range

NF A82-111:1989 Electric resistance welding. Low impedance cables. Sizes, specifications and tests.
NF C93-537-1-11*NF EN 50289-1-11:2017 Communication cables - Specifications for test methods - Part 1-11 : electrical test methods - Characteristic impedance, input impedance, return loss
NF EN 50289-1-11:2017 Câbles de communication - Spécifications des méthodes d'essai - Partie 1-11 : méthodes d'essais électriques - Impédance caractéristique, impédance d'entrée, affaiblissement de réflexion
NF C93-537-1-11:2002 Communication cables - Specifications for test methods - Part 1-11 : electrical test methods - Characteristic impedance, input impedance, return loss.
NF C90-201-7*NF EN 50065-7:2002 Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz - Part 7 : equipment impedance
NF A89-568:2011 Resistance welding - Vickers hardness testing (low-force and microhardness) of resistance spot, projection, and seam welds.
NF G38-202*NF EN 14575:2005 Geosynthetic barriers - Screening test method for determining the resistance to oxidation
NF E12-020:2011 Personnal weighing scales with bio-impedance measurement for body composition analysis - Specifications and test methods.
NF C91-004-16*NF EN 61000-4-16:2016 Electromagnetic compatibility (EMC) - Part 4-16 : testing and measurement techniques - Test for immunity to conducted, common mode disturbances in the frequency range 0 Hz to 150 kHz
NF EN IEC 61000-4-18:2019 Compatibilité électromagnétique (CEM) - Partie 4-18 : techniques d'essai et de mesure - Essai d'immunité à l'onde oscillatoire amortie
NF C91-004-10*NF EN 61000-4-10:2017 Electromagnetic compatibility (EMC) - Part 4-10 : testing and measurement techniques - Damped oscillatory magnetic field immunity test
NF EN 61000-4-12:2017 Compatibilité électromagnétique (CEM) - Partie 4-12 : techniques d'essai et de mesure - Essai d'immunité à l'onde sinusoïdale fortement amortie
NF EN 61000-4-10:2017 Compatibilité électromagnétique (CEM) - Partie 4-10 : techniques d'essai et de mesure - Essai d'immunité au champ magnétique oscillatoire amorti
NF C91-004-16/A2:2011 Electromagnetic compatibility (EMC) - Part 4-16 : testing and measurement techniques - Test for immunity to conducted, common mode disturbances in the frequency range 0 Hz to 150 kHz.
NF P94-160-4:1994 Sols : reconnaissance et essais - Auscultation d'un élément de fondation - Partie 4 : méthode par impédance.
NF C93-537-1-2*NF EN 50289-1-2:2001 Communication cables - Specifications for test methods - Part 1-2 : electrical test method - DC resistance
NF S10-030-1*NF ISO 9022-1:2016 Optics and photonics - Environmental test methods - Part 1 : definitions, extent of testing
NF C90-201-4-4*NF EN 50065-4-4:2005 Signalling on low voltage electrical installations in the frequency range 3 kHz to 148,5 kHz - Part 4-4 : low voltage decoupling filter - Impedance filter.
NF C90-133-4-16*NF EN IEC 62153-4-16:2021 Metallic cables and other passive components test methods - Part 4-16 : electromagnetic compatibility (EMC) - Extension of the frequency range to higher frequencies for transfer impedance and to lower frequencies for screening attenuation measurements usi
NF C91-004-18*NF EN 61000-4-18:2007 Electromagnetic compatibility (EMC) - Part 4-18 : testing and measurement techniques - Damped oscillatory wave immunity test.
NF EN 3475-807:2003 Série aérospatiale - Câbles électriques à usage aéronautique - Méthodes d'essais - Partie 807 : impédance de transfert
NF EN 3475-805:2003 Série aérospatiale - Câbles électriques à usage aéronautique - Méthodes d'essais - Partie 805 : impédance caractéristique
NF C91-004-18/A1*NF EN 61000-4-18/A1:2011 Electromagnetic compatibility (EMC) - Part 4-18 : testing and measurement techniques - Damped oscillatory wave immunity test.
NF EN 60512-23-7:2005 Connecteurs pour équipements électroniques - Essais et mesures - Partie 23-7 : essais d'écrantage et de filtrage - Essai 23g : impédance de transfert efficace des connecteurs
NF EN 60512-25-7:2005 Connecteurs pour équipements électroniques - Essais et mesures - Partie 25-7 : essais 25g : impédance, coefficient de réflexion et rapport d'ondes stationnaires en tension (VSWR)
NF EN 61000-4-19:2014 Compatibilité électromagnétique (CEM) - Partie 4-19 : techniques d'essai et de mesure - Essai pour l'immunité aux perturbations conduites en mode différentiel et à la signalisation dans la gamme de fréquences de 2 kHz à 150 kHz, aux accès de...
NF R12-754:2009 Passenger car, truck and bus tyres - Methods of measuring rolling resistance - Single point test and correlation of measurement results.
NF C91-004-16/A1:2004 Electromagnetic compatibility (EMC) - Part 4-16 : testing and measurement techniques - Test for immunity to conducted, common mode disturbances in the frequency range 0 Hz to 150 kHz.
NF C91-004-10/A1:2001 Electromagnetic compatibility (EMC) - Part 4-10 : testing and measurement techniques - Damped oscillatory magnetic field immunity test.
FD A05-313*FD ISO/TR 16208:2014 Corrosion of metals and alloys - Test method for corrosion of materials by electrochemical impedance measurements
NF EN 50289-1-4:2001 Câbles de communication - Spécifications des méthodes d'essai - Partie 1-4 : méthodes d'essais électriques - Résistance d'isolement
NF EN 50289-1-2:2023 Câbles de communication - Spécifications des méthodes d'essais - Partie 1-2 : méthodes d'essais électriques - Résistance continue

British Standards Institution (BSI), Impedance test range

BS EN 50289-1-11:2016 Tracked Changes. Communication cables. Specifications for test methods. Electrical test methods. Characteristic impedance, input impedance, return loss
BS EN 50289-1-11:2002 Communication cables - Specifications for test methods - Electrical test methods - Characteristic impedance, input impedance, return loss
BS EN 50065-7:2002 Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148.5 kHz - Equipment impedance
BS EN 50065-7:2001 Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148.5 kHz - Equipment impedance
BS EN IEC 61000-4-18:2019 Electromagnetic compatibility (EMC). Testing and measurement techniques. Damped oscillatory wave immunity test
BS EN 61000-4-18:2007 Electromagnetic compatibility (EMC) - Testing and measurement techniques - Damped oscillatory wave immunity test
BS EN 50065-4-4:2003 Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148.5 kHz - Low voltage decoupling filters - Impedance filter
BS IEC 62153-4-16:2016 Metallic communication cable test methods. Electromagnetic compatibility (EMC). Extension of the frequency range to higher frequencies for transfer impedance and to lower frequencies for screening attenuation measurements using the triaxial set-up
BS ISO 5636-5:2013 Paper and board. Determination of air permeance (medium range). Gurley method
BS EN 14575:2005 Geosynthetic barriers - Screening test method for determining the resistance to oxidation
BS EN 61000-4-16:1998+A2:2011 Electromagnetic compatibility (EMC). Testing and measurement techniques. Test for immunity to conducted, common mode disturbances in the frequency range 0 Hz to 150 kHz
BS EN 61000-4-16:1998 Electromagnetic compatibility (EMC) - Testing and measurement techniques - Test for immunity to conducted, common mode disturbances in the frequency range 0 Hz to 150 kHz
BS EN 61000-4-16:2016 Electromagnetic compatibility (EMC). Testing and measurement techniques. Test for immunity to conducted, common mode disturbances in the frequency range 0 Hz to 150 kHz
BS EN 61000-4-10:2017 Tracked Changes. Electromagnetic compatibility (EMC). Testing and measurement techniques. Damped oscillatory magnetic field immunity test
BS EN 61000-4-18:2007+A1:2010 Electromagnetic compatibility (EMC). Part 4-18: Testing and measurement techniques. Damped oscillatory wave immunity test
BS ISO 9022-1:2016 Tracked Changes. Optics and photonics. Environmental test methods. Definitions, extent of testing
BS EN 50065-4-4:2023 Tracked Changes. Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz. Low voltage decoupling filter. Impedance filter
BS EN 13415:2010 Test of adhesives for floor covering - Determination of the electrical resistance of adhesive films and composites
BS EN 60255-22-6:2001 Electrical relays. Electrical disturbance tests for measuring relays and protection equipment. Immunity to conducted disturbances induced by radio frequency fields
BS EN IEC 62153-4-16:2021 Metallic cables and other passive components test methods. Electromagnetic compatibility (EMC). Extension of the frequency range to higher frequencies for transfer impedance and to lower frequencies for screening attenuation measurements using the triaxia
PD IEC TR 62809:2019 Summary of requirements and tests to products in the scope of IEC 60601-2-66
13/30261384 DC BS EN 50344. Routine tests for controls within the scope of the EN 60730 series
BS EN 60512-19-1:2010 Connectors for electronic equipment - Tests and measurements - Chemical resistance tests - Test 19a - Fluid resistance of pre-insulated crimp barrels
BS EN 13146-2:2012 Railway applications. Track. Test methods for fastening systems. Determination of torsional resistance
BS EN 13146-2:2002 Railway applications - Track - Test methods for fastening systems - Determination of torsional resistance
BS ISO 20860-2:2009 Road vehicles - 50 ohms impedance radio frequency connection system interface - Test procedures
BS EN 60512-25-7:2005 Connectors for electronic equipment - Tests and measurements - Test 25g - Impedance, reflection coefficient and voltage standing wave ratio (VSWR)
21/30422308 DC BS EN 50065-4-4. Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz. Part 4-4. Low voltage decoupling filter. Impedance filter
PD ISO/TR 16208:2014 Corrosion of metals and alloys. Test method for corrosion of materials by electrochemical impedance measurements
BS PD ISO/TR 16208:2014 Corrosion of metals and alloys. Test method for corrosion of materials by electrochemical impedance measurements
BS EN 60512-23-7:2005 Connectors for electronic equipment - Tests and measurements - Screening and filtering tests - Test 23g - Effective transfer impedance of connectors
BS EN 2591-701:2001 Elements of electrical and optical connection - Test methods - Electrical elements - Measurement of open circuit impedance of couplers
BS EN 6059-401:2022 Aerospace series. Electrical cables, installation. Protection sleeves. Test methods - Expansion range

Professional Standard - Electron, Impedance test range

SJ 2534.14-1985 Test procedures for antennas--Measurement of impedances
SJ 20788-2000 Measurment method for thermal impedance of semiconductor diodes
SJ 2139-1982 Methods of measurement for dynamic impedance of silicon current regulator diodes
SJ 2148-1982 Methods of measurement for dynamic impedance of silicon current regulator transistors
SJ/Z 9010.9-1987 Measurements of electrical properties of electronic tubes and valves--Part 9: Methods of measuring the cathode-interface impedance
SJ/T 11385-2008 General specification of insulation resistance tester
SJ 427-1973 Methods of measurement for dynamic ranges of low noise travelling wave tubes
SJ/T 11386-2008 General specification of earth coninuity tester
SJ 370-1973 Measurement of electronic tuning range of reflex klystrons
SJ 1711-1981 Measurement of operating frequency range of power klystrons
SJ 441-1973 Method of measurement for operating frequency range of O-type backward-wave tubes
SJ 429-1973 Methods of measurement for frequency ranges of low noise travelling wave tubes

AENOR, Impedance test range

UNE-EN 50289-1-11:2002 Communication cables - Specifications for test methods -- Part 1-11: Electrical test methods - Characteristic impedance, input impedance, return loss.
UNE-EN 50065-7:2002 Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz. Part 7: Equipment impedance.
UNE-EN 61000-4-16:1998/A1:2005 Electromagnetic compatibility (EMC) -- Part 4-16: Testing and measurement techniques - Test for immunity to conducted, common mode disturbances in the frequency range 0 Hz to 150 kHz
UNE-EN 61000-4-16:1998/A2:2011 Electromagnetic compatibility (EMC) -- Part 4-16: Testing and measurement techniques - Test for immunity to conducted, common mode disturbances in the frequency range 0 Hz to 150 kHz
UNE-EN 61000-4-16:1998 ELECTROMAGNETIC COMPATIBILITY (EMC). PART 4-16: TESTING AND MEASUREMENt techiques. Test for immunity to conducted, common mode disturbances in the frequency range 0 Hz to 150 kHz.
UNE-EN 61000-4-18:2008/A1:2011 Electromagnetic compatibility (EMC) -- Part 4-18: Testing and measurement techniques - Damped oscillatory wave immunity test
UNE-EN 61000-4-10/A1:2001 Electromagnetic compatibility (EMC) -- Part 4-10: Testing and measurement techniques - Damped oscillatory magnetic field immunity test.
UNE-EN 50065-4-4:2004 Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz -- Part 4-4: Low voltage decoupling filter - Impedance filter
UNE-EN 12943:2000 FILLER MATERIALS FOR THERMOPLASTICS - SCOPE, DESIGNATION, REQUIREMENTS, TESTS
UNE-EN 61000-4-18:2008 Electromagnetic compatibility (EMC) -- Part 4-18: Testing and measurement techniques - Damped oscillatory wave immunity test (IEC 61000-4-18:2006).
UNE-EN 12390-4:2001 Testing hardened concrete - Part 4: Compressive strength - Specification for testing machines.
UNE-EN 61000-4-19:2015 Electromagnetic compatibility (EMC) - Part 4-19: Testing and measurement techniques - Test for immunity to conducted, differential mode disturbances and signalling in the frequency range 2 kHz to 150 kHz at a.c. power ports
UNE-EN 61000-4-10:1996 ELECTROMAGNETIC COMPATIBILITY (EMC). PART 4: TESTING AND MEASUREMENT TECHNIQUES. SECTION 10: DAMPED OSCILATORY MAGNETIC FIELD IMMUNITY TEST. BASIC EMC PUBLICATION.
UNE-EN 50289-1-4:2001 Communication cables - Specifications for test methods -- Part 1-4: Electrical test methods - Insulation resistance.
UNE-EN 50289-1-2:2002 Communication cables - Specifications for test methods -- Part 1-2: Electrical test methods - DC resistance.
UNE-EN 50289-4-9:2002 Communication cables - Specifications for test methods -- Part 4-9: Environmental test methods - Pneumatic resistance.
UNE-EN 13123-2:2004 Windows, doors, and shutters - Explosion resistance - Requirements and classification - Part 2: Range test

Danish Standards Foundation, Impedance test range

DS/EN 50289-1-11:2002 Communication cables - Specifications for test methods - Part 1-11: Electrical test methods - Characteristic impedance, input impedance, return loss
DS/EN 50065-7:2002 Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz - Part 7: Equipment impedance
DS/EN 61000-4-16/A2:2011 Electromagnetic compatibility (EMC) – Part 4-16: Testing and measurement techniques – Test for immunity to conducted, common mode disturbances in the frequency range 0 Hz to 150 kHz
DS/EN 61000-4-16/A1:2004 Electromagnetic compatibility (EMC) - Part 4-16: Testing and measurement techniques - Test for immunity to conducted, common mode disturbances in the frequency range 0 Hz to 150 kHz
DS/EN 61000-4-16:1998 Electromagnetic Compatibility (EMC) - Part 4-16: Testing and measurement techniques - Test for immunity to conducted, common mode disturbances in the frequency range 0 Hz to 150 kHz
DS/EN 61000-4-18:2008 Electromagnetic compatibility (EMC) - Part 4-18: Testing and measurement techniques - Damped oscillatory wave immunity test
DS/EN 61000-4-18/A1:2010 Electromagnetic compatibility (EMC) - Part 4-18: Testing and measurement techniques - Damped oscillatory wave immunity test
DS/EN 61000-4-18/Corr.:2008 Electromagnetic compatibility (EMC) - Part 4-18: Testing and measurement techniques - Damped oscillatory wave immunity test
DS/EN 61000-4-10/A1:2001 Electromagnetic compatibility (EMC) - Part 4-10: Testing and measurement techniques - Damped oscillatory magnetic field immunity test
DS/EN 50065-4-4:2003 Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz - Part 4-4: Low voltage decoupling filter - Impedance filter
DS/EN IEC 62153-4-16:2021 Metallic cables and other passive components test methods – Part 4-16: Electromagnetic compatibility (EMC) – Extension of the frequency range to higher frequencies for transfer impedance and to lower frequencies for screening attenuation measurements usin
DS/IEC/TR 62809:2013 Summary of requirements and tests to products in the scope of IEC 60601-2-66
DS/EN 60512-23-7:2005 Connectors for electronic equipment - Tests and measurements - Part 23-7: Screening and filtering tests - Test 23g: Effective transfer impedance of connectors
DS/CLC/TR 50579:2012 Electricity metering equipment (a.c.) - Severity levels, immunity requirements and test methods for conducted disturbances in the frequency range 2 kHz - 150 kHz
DS/EN 60512-25-7:2005 Connectors for electronic equipment - Tests and measurements - Part 25-7: Test 25g - Impedance, reflection coefficient and voltage standing wave ratio (VSWR)
DS/EN 12943:2000 Filler materials for thermoplastics - Scope, designation, requirements, tests
DS/EN 50289-1-2:2002 Communication cables - Specifications for test methods - Part 1-2: Electrical test methods - DC resistance
DS/EN 50289-1-4:2002 Communication cables - Specifications for test methods - Part 1-4: Electrical test methods - Insulation resistance
DS/EN 13123-2:2004 Windows, doors and shutters - Explosion resistance - Requirements and classification - Part 2: Range test

ES-UNE, Impedance test range

UNE-EN 50289-1-11:2017 Communication cables - Specifications for test methods - Part 1-11: Electrical test methods - Characteristic impedance, input impedance, return loss
UNE-EN IEC 61000-4-18:2019 Electromagnetic compatibility (EMC) - Part 4-18: Testing and measurement techniques - Damped oscillatory wave immunity test (Endorsed by Asociación Española de Normalización in August of 2019.)
UNE-EN IEC 61000-4-18:2019/AC:2019-10 Electromagnetic compatibility (EMC) - Part 4-18: Testing and measurement techniques - Damped oscillatory wave immunity test (Endorsed by Asociación Española de Normalización in November of 2019.)
UNE-EN 61000-4-10:2017 Electromagnetic compatibility (EMC) - Part 4-10: Testing and measurement techniques - Damped oscillatory magnetic field immunity test
UNE-CLC/TR 50579:2012 Electricity metering equipment (a.c.) - Severity levels, immunity requirements and test methods for conducted disturbances in the frequency range 2 kHz - 150 kHz (Endorsed by AENOR in November of 2012.)
UNE-EN 50065-4-4:2023 Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz Part 4-4: Low voltage decoupling filter - Impedance filter
EN 50065-4-4:2023 Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz Part 4-4: Low voltage decoupling filter - Impedance filter
UNE-EN 3475-805:2002 Aerospace series. Cables, electrical, aircraft use. Test methods. Part 805: Characteristic impedance (Endorsed by AENOR in August of 2002.)
UNE-EN 3475-807:2002 Aerospace series. Cables, electrical, aircraft use. Test methods. Part 807: Transfer impedance (Endorsed by AENOR in August of 2002.)

Group Standards of the People's Republic of China, Impedance test range

T/CPSS 1008-2022 Test specification for impedance characteristics of power supply equipment in information system
T/XAI 10-2021 Test equipment for impedance value of package substrate
T/CSA 047-2019 Measurement Method for Real Thermal Resistance and Impedance of Light Emitting Diodes
T/GVS 007-2022 Test method for dynamic impedance of RF generator
T/CEC 354-2020 General technical requirements for transformer low-voltage short-circuit impedance tester
T/BEA 40003-2023 Calibration Specification of Transient Resistance Test Equipment
T/CIE 148-2022
T/CSAE 189-2021 Test methods for the shielding high-voltage cable and connector of electric vehicles surface transfer impedance

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Impedance test range

GB/T 18864-2002 Rubber,vulcanized--Antistatic and conductive products for industial use--Electrical resistance limits
GBJ 88-1985 Measurement of sound-absorbing coefficient and sound-resistance rate by method of standing wave tubes
GB/T 17626.10-1998 Electromagnetic compatibility--Testing and measurement techniques--Damped oscillatory magnetic field immunity test
GB/T 617-1988 Chemical reagent--General method for the determination of melting range
GB/T 617-2006 Chemical reagent General method for the determination of melting range

US-FCR, Impedance test range

FCR COE ETN 80-5 SUPPLEMENT 1-1981 FACILITIES ENGINEERING GROUND IMPEDANCE TESTING
FCR COE ETN 80-5-1979 FACILITIES ENGINEERING GROUND IMPEDANCE TESTING

National Metrological Technical Specifications of the People's Republic of China, Impedance test range

JJF 2000-2022 Calibration specification for loop impedance/prospective short-circuit current tester
JJF 1883-2020 Calibration Specification for Standard Sample in Impedance Tube Absorption
JJF 2056-2023 Calibration Specification for Automatic Microbial Detection Systems based on Impedance Method
JJF 1285-2011 Calibration Specification for Surface Resistance Tester
JJF 1620-2017 Calibration Specification for Battery Internal Resistance Testers
JJF(机械) 073-2009 Calibration specification for loop resistance tester
JJF(纺织) 100-2021 Calibration Specification for Textile Electrical Resistance Testers
JJF(纺织)100-2021 Calibration Specification for Textile Electrical Resistance Testers

European Committee for Standardization (CEN), Impedance test range

EN 13124-2:2004 Windows, doors and shutters - Explosion resistance; Test method - Part 2: Range test
EN 12774:1999 Footwear - Test Methods for Outsoles - Determination of Split Tear Strength and Delamination Resistance
EN 3475-805:2002 Aerospace series - Cables, electrical, aircraft use; Test methods - Part 805: Characteristic impedance
EN 3475-807:2002 Aerospace series - Cables, electrical, aircraft use; Test methods - Part 807: Transfer impedance
EN 12881-2:2005 Conveyor belts - Fire simulation flammability testing - Part 2: Large scale fire test Incorporates Amendment 1: 2008

Indonesia Standards, Impedance test range

SNI 15-1572-1989 Detergen resistance of glaze, Test method
SNI ISO 5636-5:2011 Paper and board - Determination of air permeance and air resistance (medium range) - Part 5: Gurley method
SNI 03-0450-1989 Test method for reactive alkaline properties of cement with concrete aggregates using stirring rod.

Professional Standard - Coal, Impedance test range

MT/T 858-2000 Measurement and test methods of cutting resistance for coal

Korean Agency for Technology and Standards (KATS), Impedance test range

KS R 9190-2003(2013)
KS F 2732-2008 Testing method for pullout strength to conclude compressive strength of concrete
KS F 2733-2008 Testing method for penetration resistance to conclude compressive strength of concrete
KS F 2733-2023 Testing method for penetration resistance to conclude compressive strength of concrete
KS F 2733-2018 Standard test method for penetration resistance to conclude compressive strength of concrete
KS C 0271-1995 Electromagnetic compatibility-Testing and measurement techniques -Damped oscillatory magnetic field immunity test
KS C 0271-1995(2017) Electromagnetic compatibility-Testing and measurement techniques -Damped oscillatory magnetic field immunity test
KS B ISO 16811:2019 Non-destructive testing — Ultrasonic testing — Sensitivity and range setting
KS C IEC 61000-4-18:2014 Electromagnetic compatibility(EMC) — Part 4-18: Testing and measurement techniques — Damped oscillatory wave immunity test
KS C 0304-1-2009(2020) Test method of magnetic shielding effectiveness in SLF range
KS B ISO 9022-1:2018 Optics and photonics — Environmental test methods — Part 1: Definitions, extent of testing
KS C IEC 61000-4-16:2013 Electromagnetic compatibility(EMC)-Part 4-16:Testing and measurement techniques-Test for immunity to conducted, common mode disturbances in the frequency range 0 Hz to 150 kHz
KS M ISO 5636-5:2004 Paper and board-Determination of air permeance and air resistance(medium range)-Part 5:Gurley method
KS C IEC 61000-4-16-2013(2018) Electromagnetic compatibility(EMC)－Part 4-16：Testing and measurement techniques－Test for immunity to conducted, common mode disturbances in the frequency range 0 Hz to 150 kHz
KS C IEC 60512-23-7:2009 Connectors for electronic equipment-Tests and measurements-Part 23-7:Screening and filtering tests-Test 23g:Effective transfer impedance of connectors
KS C IEC 60512-23-7:2014 Connectors for electronic equipment－Tests and measurements－Part 23-7：Screening and filtering tests－Test 23g：Effective transfer impedance of connectors
KS C IEC 61000-4-10:2004 Electromagnetic compatibility(EMC)-Part 4:Testing and measurement techniques-Section 10:Damped oscillatory magnetic field immunity test
KS C IEC 61000-4-10:2014 Electromagnetic compatibility(EMC) — Part 4-10: Testing and measurement techniques — Damped oscillatory magnetic field immunity test — Basic EMC publication
KS C IEC 60512-25-7:2009 Connectors for electronic equipment-Tests and measurements-Part 25-7:Test 25g:Impedance, reflection coefficient, and voltage standing wave ratio(VSWR)
KS C IEC 60512-25-7:2014 Connectors for electronic equipment－Tests and measurements－Part 25-7：Test 25g：Impedance, reflection coefficient, and voltage standing wave ratio(VSWR)
KS C IEC 61000-4-18-2014(2019) Electromagnetic compatibility(EMC) — Part 4-18: Testing and measurement techniques — Damped oscillatory wave immunity test
KS C IEC 61000-4-19:2016 Electromagnetic compatibility(EMC) — Part 4-19: Testing and measurement techniques — Test for immunity to conducted, differential mode disturbances and signalling in the frequency range 2 kHz to 150 kHz at a.c. power ports

Hebei Provincial Standard of the People's Republic of China, Impedance test range

DB13/T 5384-2021 Test procedure for soil bulk density by complex impedance method

American Society for Testing and Materials (ASTM), Impedance test range

ASTM C384-04(2016) Standard Test Method for Impedance and Absorption of Acoustical Materials by Impedance Tube Method
ASTM C384-03 Standard Test Method for Impedance and Absorption of Acoustical Materials by the Impedance Tube Method
ASTM C384-04 Standard Test Method for Impedance and Absorption of Acoustical Materials by Impedance Tube Method
ASTM C384-04(2011) Standard Test Method for Impedance and Absorption of Acoustical Materials by Impedance Tube Method
ASTM B457-67(2008)e1 Standard Test Method for Measurement of Impedance of Anodic Coatings on Aluminum
ASTM B457-67(2003) Standard Test Method for Measurement of Impedance of Anodic Coatings on Aluminum
ASTM B457-67(2018) Standard Test Method for Measurement of Impedance of Anodic Coatings on Aluminum
ASTM B457-67(1998) Standard Test Method for Measurement of Impedance of Anodic Coatings on Aluminum
ASTM F1680-02 Standard Test Method for Determining Circuit Resistance of a Membrane Switch
ASTM D7766/D7766M-11 Standard Practice for Damage Resistance Testing of Sandwich Constructions
ASTM F1680-07 Standard Test Method for Determining Circuit Resistance of a Membrane Switch
ASTM F1680-07a Standard Test Method for Determining Circuit Resistance of a Membrane Switch
ASTM B457-67(2013) Standard Test Method for Measurement of Impedance of Anodic Coatings on Aluminum
ASTM F1521-12(2018) Standard Test Methods for Performance of Range Tops
ASTM F1991-99 Standard Test Method for Performance of Chinese (Wok) Ranges
ASTM E2938-15 Standard Test Method for Evaluating the Relative-Range Measurement Performance of 3D Imaging Systems in the Medium Range
ASTM D6352-03 Standard Test Method for Boiling Range Distribution of Petroleum Distillates in Boiling Range from 174 to 700176;C by Gas Chromatography
ASTM D6352-98 Standard Test Method for Boiling Range Distribution of Petroleum Distillates in Boiling Range from 174 to 700176C by Gas Chromatography
ASTM D6352-02 Standard Test Method for Boiling Range Distribution of Petroleum Distillates in Boiling Range from 174 to 700176C by Gas Chromatography
ASTM D6352-04e1 Standard Test Method for Boiling Range Distribution of Petroleum Distillates in Boiling Range from 174 to 700176;C by Gas Chromatography
ASTM D6352-04(2009) Standard Test Method for Boiling Range Distribution of Petroleum Distillates in Boiling Range from 174 to 700176;C by Gas Chromatography
ASTM D8370-22 Standard Test Method for Field Measurement of Electrochemical Impedance on Coatings and Linings
ASTM A1038-10a Standard Test Method for Portable Hardness Testing by the Ultrasonic Contact Impedance Method
ASTM A1038-13 Standard Test Method for Portable Hardness Testing by the Ultrasonic Contact Impedance Method
ASTM A1038-19 Standard Test Method for Portable Hardness Testing by the Ultrasonic Contact Impedance Method
ASTM F1207M-96(2007) Standard Specification for Electrical Insulation Monitors for Monitoring Ground Resistance in Active Electrical Systems [Metric]
ASTM D2977-03 Standard Test Method for Particle Size Range of Peat Materials for Horticultural Purposes
ASTM D1519-95(2014) Standard Test Methods for Rubber Chemicals—Determination of Melting Range
ASTM D7398-07 Standard Test Method for Boiling Range Distribution of Fatty Acid Methyl Esters (FAME) in the Boiling Range from 100 to 615C by Gas Chromatography
ASTM D1519-95(2023) Standard Test Methods for Rubber Chemicals—Determination of Melting Range
ASTM D991-89(2005) Standard Test Method for Rubber Property-Volume Resistivity Of Electrically Conductive and Antistatic Products
ASTM E2740-12 Standard Specification for Trash Receptacles Subjected to Blast Resistance Testing
ASTM E2740-12(2018) Standard Specification for Trash Receptacles Subjected to Blast Resistance Testing
ASTM D1519-95(2019) Standard Test Methods for Rubber Chemicals—Determination of Melting Range
ASTM D7398-11(2021) Standard Test Method for Boiling Range Distribution of Fatty Acid Methyl Esters (FAME) in the Boiling Range from 100 ��C to 615 ��C by Gas Chromatography
ASTM D7398-21 Standard Test Method for Boiling Range Distribution of Fatty Acid Methyl Esters (FAME) in the Boiling Range from 100 °C to 615 °C by Gas Chromatography
ASTM D7213-11 Standard Test Method for Boiling Range Distribution of Petroleum Distillates in the Boiling Range from 100 to 615176;C by Gas Chromatography
ASTM D7398-11(2016) Standard Test Method for Boiling Range Distribution of Fatty Acid Methyl Esters (FAME) in the Boiling Range from 100&x2009;&xb0;C to 615&x2009;&xb0;C by Gas Chromatography
ASTM D7500-08 Standard Test Method for Determination of Boiling Range Distribution of Distillates and Lubricating Base Oilsx2014;in Boiling Range from 100 to 735x00B0;C by Gas Chromatography
ASTM E2126-09 Standard Test Methods for Cyclic (Reversed) Load Test for Shear Resistance of Vertical Elements of the Lateral Force Resisting Systems for Buildings
ASTM F875-94(2003)e1 Standard Test Method for Evaluation of Large Area Density and Background on Office Copiers
ASTM F875-94(2003) Standard Test Method for Evaluation of Large Area Density and Background on Office Copiers
ASTM F875-94(2009) Standard Test Method for Evaluation of Large Area Density and Background on Office Copiers
ASTM F875-94(1998) Standard Test Method for Evaluation of Large Area Density and Background on Office Copiers
ASTM F875-09 Standard Test Method for Evaluation of Large Area Density and Background on Office Copiers

RU-GOST R, Impedance test range

GOST R IEC 61557-3-2006 Low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. Electrical safety. Equipment for testing, measuring or monitoring of protective measures. Part 3. Loop impedance
GOST R 50034-1992 Electromagnetic compatibility. Asynchronous motors of voltage about 1000 V. Limits and test methods on immunity to electromagnetic disturbance
GOST R ISO 16811-2016 Non-destructive testing. Ultrasonic testing. Sensitivity and range setting
GOST R IEC 61557-2-2005 Low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. Electrical safety. Equipment for testing, measuring or monitoring of protective measures. Part 2. Insulation resistance
GOST R 51317.4.16-2000 Electromagnetic compatibility of technical equipment. Immunity to conducted disturbances in the frequency range 0 Hz to 150 kHz. Requirement and test methods
GOST IEC 61000-4-18-2016 Electromagnetic compatibility (EMC). Part 4-18. Testing and measurement techniques. Damped oscillatory wave immunity test
GOST 33454-2015 Testing of chemicals of environmental hazard. Determination of the melting point/melting range
GOST R 50652-1994 Electromagnetic compatibility of technical equipment. Immunity to damped oscillatory magnetic field. Technical requirements and test methods

American National Standards Institute （ANSI), Impedance test range

ANSI S3.39-1987 Specifications for Instruments to Measure Aural Acoustic Impedance and Admittance (Aural Acoustic Immittance)
ANSI/SCTE 50-2007 Test Procedure for Measuring Regularity of Impendance of Coaxial Cable
ANSI/ASTM F1991:2006 TEST METHOD FOR PERFORMANCE OF CHINESE WOK RANGES
ANSI/ASTM D7398:2007 Test Method for the Boiling Range Distribution of Fatty Acid Methyl Esters (fame) in the Boiling Range from 100 to 615 C by Gas Chromatography
ANSI/IEEE 1560:2005 Standard for Methods of Measurement of Radio Frequency Power Line Interference Filter in the Range of 100 Hz to 10 GHz

GM North America, Impedance test range

GM GM9019P-1988 Test for Tack Range of Adhesives

National Metrological Verification Regulations of the People's Republic of China, Impedance test range

JJG 1180-2021 Power Frequency GroundImpedance Testers for Large Grounding Grid

VE-FONDONORMA, Impedance test range

NORVEN 55-3-1960

European Committee for Electrotechnical Standardization（CENELEC）, Impedance test range

EN 50289-1-11:2001 Communication Cables - Specifications for Test Methods Part 1-11: Electrical Test Methods - Characteristic Impedance, Input Impedance, Return Loss
EN 50289-1-11:2016 Communication cables - Specifications for test methods - Part 1-11: Electrical test methods - Characteristic impedance@ input impedance@ return loss
EN 55024:2010 Information technology equipment - Immunity characteristics - Limits and methods of measurement
EN 50065-7:2001 Signalling on Low-Voltage Electrical Installations in the Frequency Range 3 kHz to 148,5 kHz - Part 7: Equipment Impedance
EN 61000-4-16:2016 Electromagnetic compatibility (EMC) - Part 4-16: Testing and measurement techniques - Test for immunity to conducted, common mode disturbances in the frequency range 0 Hz to 150 kHz
EN 50065-4-4:2003 Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz Part 4-4: Low voltage decoupling filter - Impedance filter
EN 61000-4-10:2017 Electromagnetic compatibility (EMC) - Part 4-10: Testing and measurement techniques - Damped oscillatory magnetic field immunity test
EN 61000-4-19:2014 Electromagnetic compatibility (EMC) - Part 4-19: Testing and measurement techniques - Test for immunity to conducted, differential mode disturbances and signalling in the frequency range 2 kHz to 150 kHz at a.c. power ports
EN 50289-1-2:2023 Communication cables - Specifications for test methods - Part 1-2: Electrical test methods - DC resistance

Lithuanian Standards Office , Impedance test range

LST EN 50065-7-2003 Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz Part 7: Equipment impedance
LST EN 50065-4-4-2003 Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz - Part 4-4: Low voltage decoupling filter. Impedance filter
LST EN 61000-4-16-2001 Electromagnetic compatibility (EMC). Part 4-16: Testing and measurement techniques. Test for immunity to conducted, common mode disturbances in the frequency range 0 Hz to 150 kHz (IEC 61000-4-16:1998)
LST EN 61000-4-18-2007 Electromagnetic compatibility (EMC) - Part 4-18: Testing and measurement techniques - Damped oscillatory wave immunity test (IEC 61000-4-18:2006)
LST EN 61000-4-18-2007/AC-2008 Electromagnetic compatibility (EMC) - Part 4-18: Testing and measurement techniques - Damped oscillatory wave immunity test (IEC 61000-4-18:2006)
LST EN 12943-2001 Filler materials for thermoplastics - Scope, designation, requirements, tests
LST EN 61000-4-16-2002/A1-2004 Electromagnetic compatibility (EMC). Part 4-16: Testing and measurement techniques. Test for immunity to conducted, common mode disturbances in the frequency range 0 Hz to 150 kHz (IEC 61000-4-16:1998/A1:2001)
LST EN 61000-4-16-2001/A2-2011 Electromagnetic compatibility (EMC) -- Part 4-16: Testing and measurement techniques - Test for immunity to conducted, common mode disturbances in the frequency range 0 Hz to 150 kHz (IEC 61000-4-16:1998/A2:2009)
LST EN 61000-4-18-2007/A1-2010 Electromagnetic compatibility (EMC) -- Part 4-18: Testing and measurement techniques - Damped oscillatory wave immunity test (IEC 61000-4-18:2006/A1:2010)
LST EN 61000-4-10-2003/A1-2003 Electromagnetic compatibility (EMC). Part 4-10: Testing and measurement techniques. Damped oscillatory magnetic field immunity test (IEC 61000-4-10:1993/A1:2000)
LST EN 60512-23-7-2005 Connectors for electronic equipment. Tests and measurements. Part 23-7: Screening and filtering tests. Test 23g: Effective transfer impedance of connectors (IEC 60512-23-7:2005)
LST EN 50289-1-4-2002 Communication cables. Specifications for test methods. Part 1-4: Electrical test methods. Insulation resistance
LST EN 50289-1-2-2002 Communication cables. Specifications for test methods. Part 1-2: Electrical test methods - DC resistance
LST EN 13123-2-2004 Windows, doors, and shutters - Explosion resistance - Requirements and classification - Part 2: Range test
LST EN 60512-25-7-2005 Connectors for electronic equipment. Tests and measurements. Part 25-7: Test 25g - Impedance, reflection coefficient and voltage standing wave ratio (VSWR) (IEC 60512-25-7:2004)

CENELEC - European Committee for Electrotechnical Standardization, Impedance test range

EN 55024:1998 Information Technology Equipment - Immunity Characteristics - Limits and Methods of Measurement
PREN 50344-2013 Routine tests for controls within the scope of the EN 60730 series
CLC/TR 50579-2012 Electricity metering equipment (a.c.) - Severity levels@ immunity requirements and test methods for conducted disturbances in the frequency range 2 kHz - 150 kHz
PREN 50359-1-2-2000 Advanced Technical Ceramics Part 1-2: Electrical Properties - Determination of the Surface and Volume Resistivity in the Temperature Range 20 Degrees C to 800 Degrees C

National Electrical Manufacturers Association（NEMA), Impedance test range

NEMA WC 61-1992 Transfer Impedance Testing (Modified MIL-C-85485 Test Method) R(2000)

Acoustical Society of America (ASA), Impedance test range

ASA S3.39-1987 Specifications for Instruments to Measure Aural Acoustic Impedance and Admittance (Aural Acoustic Immittance)

German Institute for Standardization, Impedance test range

DIN 41640-54:1988-10 Measuring methods and testing procedures for electromechanical components; test 23a: transfer impedance
DIN 54519:2009 Testing of board - Short span test of solid board
DIN EN 50289-1-11:2002 Communication cables - Specifications for test methods - Part 1-11: Electrical test methods; Characteristic impedance, input impedance, return loss; German version EN 50289-1-11:2001
DIN 41640-54:1988 Measuring methods and testing procedures for electromechanical components; test 23a: transfer impedance
DIN EN 13124-2:2004-05 Windows, doors and shutters - Explosion resistance - Test method - Part 2: Range test; German version EN 13124-2:2004
DIN EN 50065-7:2002 Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz - Part 7: Equipment impedance; German version EN 50065-7:2001
DIN EN 61000-4-18:2007 Electromagnetic compatibility (EMC) - Part 4-18: Testing and measurement techniques - Damped oscillatory wave immunity test (IEC 61000-4-18:2006); German version EN 61000-4-18:2007 + Cor.: 2007
DIN EN 50065-4-4:2003 Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz - Part 4-4: Low voltage decoupling filter; Impedance filter; German version EN 50065-4-4:2003
DIN EN 60512-25-7:2005-12 Connectors for electronic equipment - Tests and measurements - Part 25-7: Test 25g - Impedance, reflection coefficient and standing voltage wave ratio (VSWR) (IEC 60512-25-7:2004); German version EN 60512-25-7:2005
DIN 50472:1981-03 Testing of permanent magnets; determination of the magnetic flux values in the working range
DIN EN 12943:1999-12 Filler materials for thermoplastics - Scope, designation, requirements, tests; German version EN 12943:1999
DIN EN 60512-23-7:2005-10 Connectors for electronic equipment - Tests and measurements - Part 23-7: Screening and filtering tests - Test 23g: Effective transfer impedance of connectors (IEC 60512-23-7:2005); German version EN 60512-23-7:2005
DIN EN 61000-4-10:2001 Electromagnetic compatibility (EMC) - Part 4-10: Testing and measurement techniques; Damped oscillatory magnetic field immunity test (IEC 61000-4-10:1993 + A1:2000); German version EN 61000-4-10:1993 + A1:2001
DIN 52253 Bb.1:1990 Test methods for the determination of the frost resistance; burnt-clay roofing tiles, fair faced clay bricks and clinker bricks; informations
DIN EN 3475-805:2023-05 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 805: Characteristic impedance; English version prEN 3475-805:2023 / Note: Date of issue 2023-04-21*Intended as replacement for DIN EN 3475-805 (2002-12).
DIN EN 13123-2:2004-05 Windows, doors, and shutters - Explosion resistance - Requirements and classification - Part 2: Range test; German version EN 13123-2:2004

YU-JUS, Impedance test range

JUS N.C0.035-1983 Tatting of insulatad conductors and cables. Measurement of electrical resistance of conductors.
JUS N.C0.050-1984 Electrical power andlighting. Tests of insulatedconductors and cables. I/Vear resistance
JUS N.A5.130-1984 Testitng of insulating materials for electrical purposes. Method of testing the resistance of insulating materials to tow voltage electric are
JUS N.C0.041-1984 Testing ofcables and flexible cords. Resistance to direct voltage
JUS N.C6.002-1981 Radio-frequency cables. Measuring methods of mean characteristic impedance (Zm) and velocity ratio.

IEEE - The Institute of Electrical and Electronics Engineers@ Inc., Impedance test range

IEEE 118-1978 Standard Test Code for Resistance Measurement
IEEE C62.33-1982 Standard Test Specifications for Varistor Surge-Protective Devices
IEEE P844.3/C22.2 293.3/D1-2018 Draft Standard for Impedance Heating of Pipelines and Equipment - General@ Testing@ Marking@ and Documentation Requirements
IEEE P844.3/C22.2 293.3/D0-2018 Draft Standard for Impedance Heating of Pipelines and Equipment - General@ Testing@ Marking@ and Documentation Requirements
IEEE P844.4/C293.4/D0-2018 Draft Standard for Impedance Heating of Pipelines and Equipment - Application Guide for Design@ Installation@ Testing@ Commissioning@ and Maintenance
IEEE P844.4/C293.4/D1-2018 Draft Standard for Impedance Heating of Pipelines and Equipment - Application Guide for Design@ Installation@ Testing@ Commissioning@ and Maintenance

Professional Standard-Ships, Impedance test range

CB 20136-2015 Measurement method of mechanical impedances of flexible pipe in three translational directions

Electronic Components, Assemblies and Materials Association, Impedance test range

ECA IS-46-1987 Test Procedure for Resistance to Soldering (Vapor Phase Technique) for Surface Mount Devices

Guangdong Provincial Standard of the People's Republic of China, Impedance test range

DB44/T 1903-2016 Circuit Board Characteristic Impedance Test Method Time Domain Reflectometry

Professional Standard - Aerospace, Impedance test range

QJ 1698-1989 Thermistor Test Specifications

Professional Standard - Machinery, Impedance test range

JB/T 11725-2013 Electrical control system of machine tools.Test specification of fault loop impedance

Japanese Industrial Standards Committee (JISC), Impedance test range

JIS K 3834:1990 Testing methods for specific resistivity recovery characteristic of water filtered by membranes
JIS H 8452:2008 Testing method for thermal cycle resistance of oxidation resistant metallic coatings
JIS P 8117:2009 Paper and board -- Determination of air permeance and air resistance(medium range) -- Gurley method
JIS K 3822:1990 Testing methods for specific resistivity recovery characteristic of water filtered by ultrafiltration modules
JIS C 61000-4-16:2017 Electromagnetic compatibility (EMC) -- Part 4-16: Testing and measurement techniques -- Test for immunity to conducted, common mode disturbances in the frequency range 0 Hz to 150 kHz
JIS C 61000-4-16:2004 Electromagnetic compatibility (EMC) -- Part 4-16: Testing and measurement techniques -- Test for immunity to conducted, common mode disturbances in the frequency range 0 Hz to 150 kHz
JIS D 6708:1976 Testing method for turning circle and turning space of agricultural tractors

Military Standard of the People's Republic of China-General Armament Department, Impedance test range

GJB 736.15-1994 Test methods for pyrotechnics - Determination of radio frequency impedance of electrical pyrotechnics
GJB 5309.12-2004 Test methods for pyrotechnics Part 12: Radio frequency impedance determination
GJB 736.15A-2019 Test methods for pyrotechnics Part 15: Determination of radio frequency impedance of electrical pyrotechnics

European Telecommunications Standards Institute (ETSI), Impedance test range

ETSI ETR 171-1995 Methods for Testing and Specification (MTS); Proforma for Scoping Reports
ETSI ETR 049-1992 Advanced Testing Methods (ATM); State of Research in the Area of Formal Test Specification Methods

PT-IPQ, Impedance test range

NP 2984-1985
NP EN 13523-5-2002 Coil coated metals Test methods Part 5:Resistance to rapid deformation(impact test)

United States Navy, Impedance test range

NAVY MIL-STD-2151 VALID NOTICE 1-1991 INCLINED LADDER TREAD TEST METHODS AND EQUIPMENT FOR WEAR, SLIP-RESISTANCE AND IMPACT
NAVY MIL-STD-2151-1984 INCLINED LADDER TREAD TEST METHODS AND EQUIPMENT FOR WEAR, SLIP-RESISTANCE AND IMPACT

工业和信息化部, Impedance test range

SJ/T 11705-2018 Ground and power supply impedance test methods for microelectronic device packages

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Impedance test range

GB/T 17626.18-2016 Electromagnetic compatibility—Testing and measurement techniques—Damped oscillatory wave immunity test
GB/T 17626.10-2017 Electromagnetic compatibility—Testing and measurement techniques—Damped oscillatory magnetic field immunity test

Professional Standard - Petroleum, Impedance test range

SY/T 5585.1-1993 Test method of electrical parameters of seismic data transmission cable Characteristic impedance and propagation time test

ETSI - European Telecommunications Standards Institute, Impedance test range

ETR 171-1995 Methods for Testing and Specification (MTS); Proforma for Scoping Reports

International Electrotechnical Commission (IEC), Impedance test range

IEC TR 62153-4-0:2007 Metallic communication cable test methods - Part 4-0: Electromagnetic compatibility (EMC) - Relationship between surface transfer impedance and screening attenuation, recommended limits
IEC 60169-26:1993 Radio-Frequency Connectors - Part 26: R.F. Coaxial Connectors with Screw Coupling - Characteristic Impedance 50 Ohms - Frequency Range 0 to 18 GHz (Type TNC 18 GHz) (Edition 1.0)
IEC 61000-4-16:2015 Electromagnetic compatibility (EMC) - Part 4-16: Testing and measurement techniques - Test for immunity to conducted, common mode disturbances in the frequency range 0 Hz to 150 kHz
IEC 61000-4-10:2016 Electromagnetic compatibility (EMC) - Part 4-10: Testing and measurement techniques - Damped oscillatory magnetic field immunity test
IEC 62153-4-16:2016 Metallic communication cable test methods - Part 4-16: Electromagnetic compatibility (EMC) - Extension of the frequency range to higher frequencies for transfer impedance and to lower frequencies for screening attenuation measurements using the triaxial s
IEC 61000-4-16:2002 Electromagnetic compatibility (EMC) - Part 4-16: Testing and measurement techniques; Test for immunity to conducted, common mode disturbances in the frequency range 0 Hz to 150 kKz
IEC 62153-4-16:2021 Metallic cables and other passive components test methods - Part 4-16: Electromagnetic compatibility (EMC) - Extension of the frequency range to higher frequencies for transfer impedance and to lower frequencies for screening attenuation measurements usin
IEC 61196-1-116:2015 Coaxial communication cables - Part 1-116: Electrical test methods - Test for impedance with time domain reflectometry (TDR)
IEC 61000-4-10:2001 Electromagnetic compatibility (EMC) - Part 4-10: Testing and measurement techniques; Damped oscillatory magnetic field immunity test
IEC 61000-4-16:1998 Electromagnetic compatibility (EMC) - Part 4-16: Testing and measurement techniques - Test for immunity to conducted, common mode disturbances in the frequency range 0 Hz to 150 kKz
IEC 61000-4-16:2011 Electromagnetic compatibility (EMC) - Part 4-16: Testing and measurement techniques - Test for immunity to conducted, common mode disturbances in the frequency range 0 Hz to 150 kKz
IEC 61000-4-16:1998+AMD1:2001+AMD2:2009 CSV Electromagnetic compatibility (EMC) - Part 4-16: Testing and measurement techniques - Test for immunity to conducted, common mode disturbances in the frequency range 0 Hz to 150 kHz
IEC 61000-4-16:1998+AMD1:2001 CSV Electromagnetic compatibility (EMC) - Part 4-16: Testing and measurement techniques - Test for immunity to conducted, common mode disturbances in the frequency range 0 Hz to 150 kHz
IEC 61000-4-16:2015 RLV Electromagnetic compatibility (EMC) - Part 4-16: Testing and measurement techniques - Test for immunity to conducted, common mode disturbances in the frequency range 0 Hz to 150 kHz
IEC 61000-4-18:2006/AMD1:2010 Electromagnetic compatibility (EMC) - Part 4-18: Testing and measurement techniques - Damped oscillatory wave immunity test
IEC 61000-4-18:2006+AMD1:2010 CSV Electromagnetic compatibility (EMC) - Part 4-18: Testing and measurement techniques - Damped oscillatory wave immunity test
IEC 61000-4-18:2006 Electromagnetic compatibility (EMC) - Part 4-18 : Testing and measurement techniques - Damped oscillatory wave immunity test
IEC 61000-4-10:1993+AMD1:2000 CSV Electromagnetic compatibility (EMC) - Part 4-10: Testing and measurement techniques - Damped oscillatory magnetic field immunity test
IEC 61000-4-10:2016 RLV Electromagnetic compatibility (EMC) - Part 4-10: Testing and measurement techniques - Damped oscillatory magnetic field immunity test
IEC 61000-4-16:1998/AMD1:2001 Electromagnetic compatibility (EMC) - Part 4-16: Testing and measurement techniques; Test for immunity to conducted, common mode disturbances in the frequency range 0 Hz to 150 kHz; Amendment 1
IEC 61000-4-18:2019 Electromagnetic compatibility (EMC) - Part 4-18: Testing and measurement techniques - Damped oscillatory wave immunity test

AT-ON, Impedance test range

ONORM EN 2591-B6-1994 Aerospace series. Elements of electrical and optical connection. Test methods. Part B6: Measurement of insulation resistance
ONORM EN 20340-1993 Conveyor belts - Flame retardation - Spezifications and test method (ISO 340:1988)
ONORM B 3639-1-1997 Asphalts for road construction and related purposes -Testing - Shear resistance in contact surfaces of asphalt layers
ONORM B 3639-2-1997 Asphalts for road construction and related purposes - Testing - Pull-off-resistance in contact surfaces of asphalt layers

Standard Association of Australia （SAA）, Impedance test range

AS/NZS 61000.4.16:2002 Electromagnetic compatibility (EMC) - Testing and measurement techniques - Test for immunity to conducted common mode disturbances in the frequency range 0 Hz to 150 kHz

KR-KS, Impedance test range

KS B ISO 16811-2019 Non-destructive testing — Ultrasonic testing — Sensitivity and range setting
KS M ISO 5636-5-2016 Paper and board－Determination of air permeance and air resistance(medium range)－Part 5：Gurley method
KS B ISO 9022-1-2018 Optics and photonics — Environmental test methods — Part 1: Definitions, extent of testing

PL-PKN, Impedance test range

PN C04576 ArkusZ00-1973 Water and waste water Tests for nitrogen Introduction and rang? of standard
PN C04587 ArkusZ00-1973 Wa?er and was?e water Tests for sodium Introduction and rang? o? standard
PN C04551 ArkusZ00-1974 Wator and wa?t* wa?er Te?U for calfcium Introductton and rang? o? standard
PN C04554 ArkusZ01-1971 Water and waste water Study of hardness Introduction and rang? of standard
PN C04586 ArkusZ01-1973 Wafer and waste wa?er Tei?s for iron In?roduc?ion and rang? of standard
PN C04602 ArkusZ01-1972 Wa?er and waste water Tests for phenols Introduction and rang? of standard
PN C04608 ArkusZ01-1972 Water , and waste water Tests for pesticides Intrcduction and rang? of standan
PN C04537 ArkusZ01-1973 Wa?er and was te wa?er Tes?s for phosphates In?roduc?ion and rang? of standard
PN C04546 ArkusZ00-1974 Wa?er and waste water Tests ?or mercury In?roduc?ion and scope of ihe standard
PN C04559 ArkusZ01-1972 Water and waste water Tests for suspended matters Introduction and rang? of standard
PN C04560 ArkusZ00-1974 Water and was?e water Tes?s for cadmium Introduction and scope of ?he standard
PN C04595 ArkusZ00-1974 Water and waste water Tests for lead Introduction and scope of the standard
PN C04612 ArkusZ00-1974 Wa?er and woste water Systematics o? testing In?roduction and rang? o? standard
PN C04633-01-1987 Water and waste water Test for carbon Introduction and scope of the standard
PN C45301-01-1993 Caprolactam Method of test Introduction and rang? of standard
PN Z04037 Arkusz 01-1973 Air purity pro?ec?ion Tes?s for chlorine Introduction and rang? of standard
PN Z04158-01-1986 Air purity protection ests for ethers ntroduction and scope f the standard
PN Z04176-01-1986 Air purity protection ests for MCPA ntroduction and scope of the tandard
PN A79528-01-1992 Spirit (ethyl aJcohol) Methods of tests Rang? of tests and genera? principles
PN C04591 ArkusZ00-1974 Water and was?e wa?er Tests for pofajsium Introduction and rang? of s?andard
PN Z04155-01-1986 Air purity protection ests for buthyl alcohol ntroduction and scope f the standard
PN Z04159-01-1986 Air purity protection ests for phenol ntroduction and scope f the standard
PN Z04166-01-1986 Air purity protection ests for octane ntroduction and scope of the tandard
PN Z04175-01-1986 Air purity protection ests for 2,4-D ntroduction and scope of the tandard
PN Z04185-01-1988 Air purity protection Tests for iodine Introduction and scope of the standard
PN Z04186-01-1988 Air purity protection Tests for molybdenum Introduction and scope of the standard
PN Z04187-01-1988 Air purity protection ests for chloroform ntroduction and scope f the standard
PN Z04196-01-1988 Air purity protection ests for formie acid ntroduction and scope f the standard
PN Z04200-01-1988 Air purity proteetion ests for oxalic acid ntroduction and scope f the standard
PN Z04202-01-1988 Air purity protection ests for asbestos ntroduction and scope f the standard
PN Z04204-01-1988 Air purity protection ests for ethylamine ntroduction and scope of the tandard
PN C04627-01-1991 Water and waste water Tests for acrylonitrile Introduction and scope of the standard
PN C04639-01-1989 Water and waste water Tests for nitrobenzene Introduction and scopeof the standard
PN C04641-01-1989 Water and waste water Tests for aromatics hydrocarbons Introduction and scope of the standard
PN C99460-00-1985 Sampling of photographic lig sensitive materials for testing Introduction and scope of the standard
PN Z04022-01-1989 Air purity protection Tests for chlorobenzenes Introduction and scope of the standard
PN Z04111-01-1989 Air purity protection Microbiological testings Introduction and scope of the standard
PN Z04154-01-1986 /\ir pumy proiecuon ests for propoxur ntroduction and scope of the tandard
PN Z04157-01-1986 Air purity protection ests for calcium oxide ntroduction and scope of the tandard
PN Z04163-01-1986 Air purity protection ests for cyklohexene ntroduction and scope f the standard
PN Z04182-01-1987 Air purity protection ests for pesticides ntroduction and scope of the standard
PN Z04203-01-1988 Air purity protection ests for ethylene glycol ntroduction and scope f the standard
PN Z04207-01-1989 Air purity protection ests for mercaptans ntroduction and scope of the standard
PN Z04149-01-1985 Air purity protection Tests for isoamyl alcohol Introduction and scope of the standard
PN Z04151-01-1986 Air purity protection Tests for cyclohexane Introduction and scope of the standard
PN Z04152-01-1986 Air purity protection ? Tests for styrene Introduction and scope of the standard
PN Z04153-01-1986 Air purity protection ests for thiram ntroduction and scope of the standard
PN Z04160-01-1986 Air punty protection ests for methyl iodide ntroduction and scope of the tandard
PN Z04162-01-1986 Air purity protection ests for diethylamine ntroduction and scope of the standard
PN Z04164-01-1986 Air purity protection ests for rnethyl bromide ntroduction and scope of the standard
PN Z04167-01-1986 Air purity protection ests for methoxyethyl alcohol ntroduction and scope f the standard
PN Z04168-01-1986 Air purity protection ests for trichlorobenzene ntroduction and scope of the standardy
PN Z04170-01-1986 Air purity protection Tests for nicotine Introduction and scope of the standard
PN Z04171-01-1986 Air purity protection Tests for picric acid Introduction and scope of the standard
PN Z04174-01-1986 Air purity protection ests for buthoxyethyl alcohol ntroduction and scope of the tandard
PN Z04179-01-1987 Air purity protection ests for trichloroethane ntroduction and scope f the standard
PN Z04181-01-1987 Air purity protection ests for monochloride sulphur ntroduction and scope f the standard
PN Z04183-01-1987 Air purity protection Tests for hydrogen chloride Introduction and scope of the standard
PN Z04189-01-1988 Air purity protection ests for aminodiphenyl ntroduction and scope of the tandard
PN Z04190-01-1988 Air punty protecticra ests for nitrodipheny ntroduction and scope of the standard
PN Z04191-01-1988 Air purity protection ests for ethylenediamine ntroduction and scope of the tandard
PN Z04201-01-1988 Air purity protection ests for phenylenediamine ntroduction and scope of the standard
PN Z04205-01-1989 Air purity protection ests for vinylpiridrne ntroduction and scope of the tandard
PN Z04212-01-1989 Air punty protection Tests for nitroglycolIntroduction and scope of the standard
PN Z04215-01-1991 Air purity protection Tests for chloroacetic acid Introduction and scope of the standard
PN C04547 ArkusZ00-1974 Wa?er and was?e water Test* for carbon dioxide In?roduc?ion and scope of the standard
PN Z04094 Arkusz 00-1974 Air puri?y pro?ec?ion Tes?s for car bon monoxide Introducfion and scope o? ?he standard
PN Z04095 Arkusz 00-1974 Air purity protection Tests for carbon dioxide Infroducfion and scope of the standard
PN Z04144-01-1985 Air purity protection Tests for dibromojethanes Introduction and sCope of the standard
PN Z04147-01-1985 Air purityprotection Tests for 1- and 2-naphtyloamine Introduction and scope of the standard
PN Z04150-01-1985 Air purity protection Tests for nitropropanes Introduction and scope of the standard
PN Z04165-01-1986 Air punty protection ests for methylbutylketone ntroduction and scope of the tandard
PN Z04173-01-1989 Air purity protection ests for dowtherms ntroduction and scope f the standard
PN Z04213-01-1989 Air purity protection Tests for nitroglycerin Introduction and scope of the standard
PN Z04021-01-1989 Higienie tests Higienie tests materials and products applied in building Introduction and scope of the standard
PN C04573 ArkusZ00-1974 Water and waste water Tests for organie solvents extractable matters Introduction and scope of the standard
PN C99470 ArkusZ00-1974 Phyiical and chemical ?esting me?hodt of pho?ographic materia In?roduction and scope of standard
PN C99470-01-1988 Physical and chemical testing methods of photographic materials Introduction and scope ot standard
PN Z04047 Arkusz 00-1974 Air puri?y protection Tests for trichloroethylene Introduction and rang? of standard
PN Z04068-01-1985 Air purity protection Tests for dimethyl sulphate Introduction and scope of the standard
PN Z04078-01-1991 Air purity protection Tests for a-chloroacetophenone Introduction and scope of the standard
PN Z04092 Arkusz 00-1974 Air purity protection Tes?s for nitric acid and nitrogen oxides Introduction and rang? of standard
PN Z04148-01-1985 /mi pumy proiection Tcsts for hydrazine and its derivalives lntroduction and scope of (he standard
PN Z04177-01-1987 Air purity protection ests for iV-phenylnaphtylamine ntroduction and scope f the standard
PN Z04188-01-1988 Air purity protection ests for 1,3-propane sultone ntroduction and scope f the standard
PN Z04192-01-1988 Air purity protection Tests for hexachlorobutadiene-l,3 Introduction and scope of the standard
PN Z04194-01-1988 Air purity protection Tests for phthalic anhydride Introduction and scope of the standard

Professional Standard - Agriculture, Impedance test range

GB 617-1988 General method for determination of melting point range of chemical reagents
111兽药典三部-2015 Text Contents Diagnostic Products Foot-and-Mouth Disease Type O Antibody Liquid Phase Blocking ELISA Detection Kit

TH-TISI, Impedance test range

TIS 1637-1998 Radio.frequency connectors.part 26: r.f. coaxial connectors with screw coupling.characteristic impedance 50 ohms.frequency range 0 to 18 ghz (type tnc 18 ghz)
TIS 1459-2009 Electromagnetic compatibility (emc).part 4: testing and measurement techniques.section 10: damped oscillatory magnetic field immunity test

International Telecommunication Union (ITU), Impedance test range

ITU-R BT.2111-2-2020 Specification of colour bar test pattern for high dynamic range television systems
ITU-R BT.2111-2 FRENCH-2020 Specification of colour bar test pattern for high dynamic range television systems
ITU-R SM.2096-2016 Test procedure for measuring direction finder sensitivity in the VHF/UHF frequency range
ITU-R SM.2138-0,ITU-R SM.2138-2021 Test procedure for measuring monitoring system field strength measurement accuracy in the VHF/UHF frequency range

ITU-R - International Telecommunication Union/ITU Radiocommunication Sector, Impedance test range

ITU-R BT.2111-0-2017 Specification of colour bar test pattern for high dynamic range television systems
ITU-R BT.2111-1-2019 Specification of colour bar test pattern for high dynamic range television systems
ITU-R SM.2096-0-2016 Test procedure for measuring direction finder sensitivity in the VHF/UHF frequency range

ZA-SANS, Impedance test range

SANS 61000-4-16:2005 Electromagnetic compatibility (EMC) Part 4-16: Testing and measurement techniques - Test for immunity to conducted, common mode disturbances in the frequency range 0 Hz to 150 kHz
SANS 61000-4-10:2003 Electromagnetic compatibility (EMC) Part 4-10: Testing and measurement techniques - Damped oscillatory magnetic field immunity test

European Association of Aerospace Industries, Impedance test range

AECMA PREN 4158-2005 Aerospace series Paints and varnishes Test method for measurements of electrical surface resistance of conductive layers Edition P 1

Electronic Components, Assemblies and Materials Association, Impedance test range

EIA_ECA-703-A-2005 General Resistor Stress Test Qualification Specification
EIA/ECA-703-A-2005 General Resistor Stress Test Qualification Specification

ECIA - Electronic Components Industry Association, Impedance test range

IS-703-1996 General Resistor Stress Test Qualification Specification

(U.S.) Joint Electron Device Engineering Council Soild State Technology Association, Impedance test range

JEDEC JESD51-51-2012 Implementation of the Electrical Test Method for the Measurement of Real Thermal Resistance and Impedance of Light-Emitting Diodes with Exposed Cooling

Canadian Standards Association (CSA), Impedance test range

CAN/CSA-CEI/IEC 61000-4-16:2002 Electromagnetic compatibility (EMC) – Part 4-16: Testing and measurement techniques – Test for immunity to conducted, common mode disturbances in the frequency range 0 Hz to 150 kHz (First Edition)
CAN/CSA-IEC 61000-4-18:2014 Electromagnetic compatibility (EMC) - Part 4-18: Testing and measurement techniques - Damped oscillatory wave immunity test (First Edition)
CAN/CSA-CEI/IEC 61000-4-16 AMD 2:2002 Amendment 2 Electromagnetic compatibility (EMC) - Part 4-16: Testing and measurement techniques - Test for immunity to conducted, common mode disturbances in the frequency range 0 Hz to 150 kHz (First Edition)
CSA IEC 61000-4-16-02-CAN/CSA:2002 Electromagnetic compatibility (EMC) - Part 4-16: Testing and measurement techniques - Test for immunity to conducted, common mode disturbances in the frequency range 0 Hz to 150 kHz First Edition; IEC 61000-4-16:1998

TR-TSE, Impedance test range

TS 2449-1976 MEASUREMENTS OF THE ELECTRICAL PROPERTIES OF ELECTRONIC TUBES AND VALVES PART 9 : METHODS OF MEASURING THE CATHODE-INTERFACE IMPEDANCE

IN-BIS, Impedance test range

International Organization for Standardization (ISO), Impedance test range

ISO 5636-5:2003 Paper and board - Determination of air permeance and air resistance (medium range) - Part 5: Gurley method
ISO 5636-5:2013 Paper and board.Determination of air permeance (medium range).Part 5: Gurley method
ISO 20843:2011 Petroleum and related products. Determination of pH of fire-resistant fluids within categories HFAE, HFAS and HFC
ISO/TR 16208:2014 Corrosion of metals and alloys - Test method for corrosion of materials by electrochemical impedance measurements

国家广播电视总局, Impedance test range

GY/T 330-2020 Ultra high definition high dynamic range video system color bar test chart

Association of German Mechanical Engineers, Impedance test range

DVS 2211-1979 "Filler materials for thermoplastics - Scope, designation, requirements, tests"

Institute of Electrical and Electronics Engineers (IEEE), Impedance test range

IEEE Std 844.3-2019/CSA C22.2 No. 293.3:19 IEEE/CSA Standard for Impedance Heating of Pipelines and Equipment - General, Testing, Marking, and Documentation Requirements
IEEE Std 844.4-2019/CSA C293.4:19 IEEE/CSA Standard for Impedance Heating of Pipelines and Equipment - Application Guide for Design, Installation, Testing, Commissioning, and Maintenance
IEEE P2956/D3, June 2023 Test Method for Surface Transfer Impedance of Shielded Power Cables and Connectors for Rail Vehicles
IEEE Std 844.4-2019*CSA C293.4:19 IEEE/CSA Standard for Impedance Heating of Pipelines and Equipment - Application Guide for Design, Installation, Testing, Commissioning, and Maintenance
IEEE P844.3/C22.2 293.3/D1, November 2018 IEEE/CSA Draft Standard for Impedance Heating of Pipelines and Equipment - General, Testing, Marking, and Documentation Requirements
IEEE P844.3/C22.2 293.3/D0, August 2018 IEEE/CSA Draft Standard for Impedance Heating of Pipelines and Equipment - General, Testing, Marking, and Documentation Requirements
IEEE P844.4/C293.4/D0, August 2018 IEEE/CSA Draft Standard for Impedance Heating of Pipelines and Equipment - Application Guide for Design, Installation, Testing, Commissioning and Maintenance

AT-OVE/ON, Impedance test range

OVE EN 50065-4-4-2021 Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz - Part 4-4: Low voltage decoupling filter - Impedance filter (english version)

The American Road & Transportation Builders Association, Impedance test range

AASHTO TP 95-2011 Standard Method of Test for Surface Resistivity Indication of Concrete鈥檚 Ability to Resist Chloride Ion Penetration
AASHTO T 358-2015 Standard Method of Test for Surface Resistivity Indication of Concrete’s Ability to Resist Chloride Ion Penetration
AASHTO T 358-2017 Standard Method of Test for Surface Resistivity Indication of Concrete��s Ability to Resist Chloride Ion Penetration
AASHTO T 358-2021 Standard Method of Test for Surface Resistivity Indication of Concrete’s Ability to Resist Chloride Ion Penetration
AASHTO TP 95-2014 Standard Method of Test for Surface Resistivity Indication of Concrete’s Ability to Resist Chloride Ion Penetration

AASHTO - American Association of State Highway and Transportation Officials, Impedance test range

TP 95-2011 Standard Method of Test for Surface Resistivity Indication of Concrete’s Ability to Resist Chloride Ion Penetration
TP 95-2014 Standard Method of Test for Surface Resistivity Indication of Concrete’s Ability to Resist Chloride Ion Penetration
T 358-2017 Standard Method of Test for Surface Resistivity Indication of Concrete’s Ability to Resist Chloride Ion Penetration
T 358-2015 Standard Method of Test for Surface Resistivity Indication of Concrete’s Ability to Resist Chloride Ion Penetration

GB-REG, Impedance test range

REG NACA-TN-2941-1953 The drag of finite-length cylinders determined from flight tests at high Reynolds numbers for a Mach number range from 0.5 to 1.3

未注明发布机构, Impedance test range

BS EN 50289-1-2:2023 Communication cables — Specifications for test methods Part 1 - 2 : Electrical test methods — DC resistance

SE-SIS, Impedance test range

SIS SS-ISO 3127:1982 Unplasticized polyvinyl chloride (PVC) pipes for the transport of fluids - Deter- mination and specification of resistance to external blows

Fujian Provincial Standard of the People's Republic of China, Impedance test range

DB35/T 1929-2020 Technical specification for detection of duck plague antibody indirect ELISA kit