ZH

RU

ES

Test Twenty Eight Definitions

Test Twenty Eight Definitions, Total:500 items.

In the international standard classification, Test Twenty Eight Definitions involves: Materials and articles in contact with foodstuffs, Vocabularies, Construction materials, Beekeeping, Ground service and maintenance equipment, Pharmaceutics, Kitchen equipment, Test conditions and procedures in general, Water quality, Telecommunication systems, Inorganic chemicals, Environmental testing, Applications of information technology, Cans. Tins. Tubes, Products of the chemical industry, Ferrous metals, Protective equipment, Electronic components in general, Languages used in information technology, Laboratory medicine, Aerospace engines and propulsion systems, Electrical and electronic testing, Analytical chemistry, Testing of metals, Iron and steel products, Electrical engineering in general, Electrical accessories, Beverages, Technical product documentation, Farming and forestry, Optical equipment, Magnetic materials, Software development and system documentation, Interior finishing, Audio, video and audiovisual engineering, Cereals, pulses and derived products, Insulating fluids, Electricity. Magnetism. Electrical and magnetic measurements, Earthworks. Excavations. Foundation construction. Underground works, Shop fittings, Organic chemicals, Rectifiers. Convertors. Stabilized power supply, Raw materials for rubber and plastics, Protection against fire, Electrical wires and cables, Coals, Semiconductor devices, Radiocommunications, Paper and board, Surface treatment and coating, Elements of buildings, Pumps, Fuels, Leather technology, Plastics, Fibre optic communications, Bearings, Electromechanical components for electronic and telecommunications equipment, Materials for the reinforcement of composites, Installations in buildings, Products of the textile industry, Domestic, commercial and industrial heating appliances, Sterilization and disinfection, Road vehicle systems, Electric road vehicles, Telecommunications in general, Animal feeding stuffs, Glass, Footwear.


AASHTO - American Association of State Highway and Transportation Officials, Test Twenty Eight Definitions

  • HM-18 PART II INDEX-1997 Part II Tests Index (Eighteenth Edition)
  • T81-1987 Standard Test Method for Xylene-Insoluble Matter in Creosote (Eighteenth Edition; Withdrawn; Delete Standard Due to the Lack of Use)
  • T 290-1995 Standard Method of Test for Determining Water Soluble Sulfate Ion Content in Soil (Eighteenth Edition)
  • T262-1982 Standard Method of Test for L10 and Leq Noise Determination (Eighteenth Edition; Withdrawn; Delete Standard Due to Lack of Use)
  • T 89-1996 Standard Method of Test for Determining the Liquid Limit of Soils (Twentieth Edition)

Association Francaise de Normalisation, Test Twenty Eight Definitions

  • NF EN 14190:2014 Produits de transformation secondaire de plaques de plâtre - Définitions, spécifications et méthodes d'essai
  • NF EN 12859:2011 Carreaux de plâtre - Définitions, spécifications et méthodes d'essai
  • NF EN 520/IN1:2009 Plaques de plâtre - Définitions, exigences et méthodes d'essai
  • NF EN 520+A1:2009 Plaques de plâtre - Définitions, exigences et méthodes d'essai
  • NF EN 13815:2006 Produits en staff - Définitions, prescriptions et méthodes d'essai
  • NF C41-106*NF EN 61180:2016 High-voltage test techniques for low-voltage equipment - Definitions, test and procedure requirements, test equipment
  • NF T90-011:1962 WATER TESTING. DETERMINATION OF CARBON DIOXIDE.
  • NF T90-016:1984 Testing water - Determination of calcium - Edta titrimetric method
  • NF S10-030-1*NF ISO 9022-1:2016 Optics and photonics - Environmental test methods - Part 1 : definitions, extent of testing
  • NF EN 60068-5-2:2000 Essais d'environnement - Partie 5 : guide pour la rédaction des méthodes d'essais - Termes et définitions
  • NF P72-642*NF EN 14209:2017 Preformed plasterboard cornices - Definitions, requirements and test methods
  • NF EN 14246:2006 Éléments en plâtre pour plafonds suspendus - Définitions, spécifications et méthodes d'essai
  • NF EN 13963:2014 Matériaux de jointoiement pour plaques de plâtre - Définitions, spécifications et méthodes d'essai
  • NF S64-050:2017 Véhicules légers médicalisés (VLM) - Définition, exigences et méthode d'essai
  • NF P94-070:1994 Sols : reconnaissance et essais - Essais à l'appareil triaxial de révolution - Généralités - Définitions.
  • NF EN 60060-1:2011 Techniques des essais à haute tension - Partie 1 : définitions et exigences générales
  • NF EN 16855-2:2018 Chambres froides - Définition, performance d'isolation thermique et méthodes d'essai - Partie 2 : chambres froides personnalisées
  • NF T90-003:1984 Testing water - Determination of calcium and magnesium total content - Edta titrimetric method.
  • NF C27-223-1*NF EN 62697-1:2013 Test method for quantitative determination of corrosive sulfur compounds in unused and used insulating liquids - Part 1: test method for quantitative determination of dibenzyldisulfide (DBDS)
  • NF C41-109*NF EN 62475:2011 High-current test techniques - Definitions and requirements for test currents and measuring systems.
  • NF EN 62697-1:2013 Méthodes d'essai pour la détermination quantitative des composés de soufre corrosif dans les liquides isolants usagés et neufs - Partie 1 : méthode d'essai pour la détermination quantitative du disulfure de dibenzyle (DBDS)
  • NF EN 14566/IN1:2009 Fixations mécaniques pour systèmes en plaques de plâtre - Définitions, spécifications et méthodes d'essai
  • NF EN 14566+A1:2009 Fixations mécaniques pour systèmes en plaques de plâtre - Définitions, spécifications et méthodes d'essai
  • NF EN 12860:2001 Liants-colles à base de plâtre pour carreaux de plâtre - Définitions, spécifications et méthodes d'essai
  • NF EN 607:2005 Gouttières pendantes et leurs raccords en PVC-U - Définitions, exigences et méthodes d'essai
  • NF EN 60068-2-7:1994 Essais fondamentaux climatiques et de robustesse mécanique - Deuxième partie : essais - Essai GA et guide : accélération constante.
  • XP P94-010:1996 Soils : investigation and testing. Geotechnical glossary. Definitions. Notations. Symbols.
  • NF EN 15270:2008 Brûleurs à granulés pour petites chaudières de chauffage - Définitions, exigences, essais, marquage
  • NF EN 13915:2017 Panneaux de cloison préfabriqués en plaques de plâtre à âme cellulaire en carton - Définitions, exigences et méthodes d'essai

Hebei Provincial Standard of the People's Republic of China, Test Twenty Eight Definitions

  • DB13/T 1499-2012 Determination of octachlorodipropyl ether in hygienic insecticide products

CZ-CSN, Test Twenty Eight Definitions

European Committee for Standardization (CEN), Test Twenty Eight Definitions

  • EN 14190:2014 Gypsum board products from reprocessing - Definitions@ requirements and test methods
  • prEN 607-2021 Eaves gutters and fittings made of PVC-U - Definitions, requirements and testing

Korean Agency for Technology and Standards (KATS), Test Twenty Eight Definitions

  • KS I 3226-2009(2019) Method for determination of tetra-through octa-chlorodibenzo-p-dioxins, tetra-though octa-chlorodibenzofurans and coplanar polychlorobiphenyls in industrial water and wastewater
  • KS I ISO 18073:2022 Water quality — Determination of tetra- to octa-chlorinated dioxins and furans ― Method using isotope dilution HRGC/HRMS
  • KS I ISO 18073-2010(2015) Water quality-Determination of tetra- to octa-chlorinated dioxins and furans-Method using isotope dilution HRGC/HRMS
  • KS I ISO 18073:2010 Water quality-Determination of tetra- to octa-chlorinated dioxins and furans-Method using isotope dilution HRGC/HRMS
  • KS C IEC 60060-1:2019 High-voltage test techniques -Part 1: General definitions and test requirements
  • KS M 8533-2004 Disodium hydrogenphosphate 12-hydrate for oxidant analysis
  • KS C IEC 61180:2020 High-voltage test techniques for low-voltage equipment —Definitions, test and procedure requirements, test equipment
  • KS C IEC 60060-3-2014(2019) High-voltage test techniques — Part 3: Definitions and requirements for on-site testing
  • KS C IEC 62475:2020 High-current test techniques — Definitions and requirements for test currents and measuring systems
  • KS B ISO 9022-1:2018 Optics and photonics — Environmental test methods — Part 1: Definitions, extent of testing
  • KS C IEC 60068-5-2:2020 Environmental testing — Part 5-2: Guide to drafting of test methods — Terms and definitions
  • KS M 8513-2004 Dichloromethane for pesticide residue analysis
  • KS C IEC 61180-1-2006(2016) High-voltage test techniques for low-voltage equipment - Part 1:Definitions, test and procedure requirements
  • KS M 1911-2009 Phthalic anhydride for industrial use-Methods of test-Determination of phthalic anhydride content-Titrimetric method
  • KS I 3204-2007(2012) Testing methods for determination of silica in highly purified water
  • KS M 1918-2002(2007) Maleic anhydride for industrial use-Methods of test-Determination of maleic anhydride content-Titrimetric method
  • KS I 3204-2007 Testing methods for determination of silica in highly purified water
  • KS I 3204-2021 Testing methods for determination of silica in highly purified water
  • KS F 2603-1991 Method for measuring amount of room ventilation(carbon dioxide method)
  • KS X ISO/IEC/IEEE 29119-1:2018 Software and systems engineering — Software testing — Part 1: Concepts and definitions
  • KS R ISO 8820-1-2014(2019) Road vehicles — Fuse-links — Part 1: Definitions and general test requirements
  • KS M 1908-2002(2007) Phthalic anhydride for industrial use-Methods of test-Measurement of colour stability
  • KS M 1913-2002(2007) Phthalic anhydride for industrial use-Methods of test-Determination of ash

HU-MSZT, Test Twenty Eight Definitions

IEEE - The Institute of Electrical and Electronics Engineers@ Inc., Test Twenty Eight Definitions

  • IEEE 1641-2012 Signal and Test Definition
  • IEEE 425-1957 TEST CODE for TRANSISTORS SEMICONDUCTOR DEFINITIONS and LEITER SYMBOLS
  • IEEE 29119-1-2013 Software and systems engineering - Software testing - Part 1: Concepts and definitions

AT-ON, Test Twenty Eight Definitions

  • ONORM K 2500-1984 Audiometer; definitions, requirements, testing
  • ONORM S 1500-1980 Testing of textiles; definitions for the simple tensile fest.
  • ONORM K 2501-1986 Speech audiometers; definitions requirements, testing
  • ONORM A 6675-1981 Types of testing; Basic terms and definitions
  • ONORM K 2030-1983 Refrigerators for blood conservation; definitions, requirements, fest
  • ONORM A 2120-1984 Writing boards for educational purposes;definitions, requirements, testing specification
  • ONORM A 1216-1-1995 Testing of printability of printing material -Terms with definttions
  • ONORM F 1050-1985 Portable fire extinguishers; dejinitions, construction requirements, Output, testing
  • ONORM S 3091-1994 Storage and transportation of prepared foodstuff - Def initions, requirements and testing
  • ONORM Z 1110-1986 Hearing protectors; definitions, safety requirements, testing, marking ofconformity
  • ONORM S 7007-1982 Testing of leather; determination of content of constituents extractable by dichlormethane
  • OENORM EN 607-2021 Eaves gutters and fittings made of PVC-U - Definitions, requirements and testing
  • ONORM K 2710-1993 Amalgam Separators - Terms and definitions, requirements, testing, marking of conformity
  • ONORM A 8091-1979 Optical danger Signals; Terms and definitions, requirements, testing, designing Instructions
  • ONORM Z 1300-1998 Safety ropes and belts - Terms and definitions, requirements, tests, marking of conformity
  • ONORM M 7533-1983 oil controls for vaporizing burners; definitions, requirements, testing and marking of conformity

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Test Twenty Eight Definitions

  • GB/T 32947-2016 Determination of octacosanol and triacontanol contents in beeswax.Gas chromatography
  • GB/T 17308-1998 Definitions of parameters for simplified automatic measurement of television insertion test signals
  • GB/T 3780.4-1994 Carbon black—Preparation of sample and determination of dibutylphthalate absorption number(compressed sample)
  • GB/T 610.2-1988 Chemical reagent--General method for the determination of arsenic (AgDDTC)
  • GB/T 19811-2005 Determination of the degree of disintegration of plastic materials under defined composting conditions in a pilot-scale test
  • GB/T 19421.2-2003 Test methods of crystalline layered sodium disilicate--Measurement of whiteness
  • GB/T 19421.3-2003 Test methods of crystalline layered sodium disilicate--Method for determination of pH
  • GB/T 3780.4-2003 Carbon black-Part 4:Determination of dibutylphthalate absorption number and preparation of samples (compressed sample)
  • GB/T 26713-2011 Footwear.Chemical tests.Determination of dimethyl fumarate(DMF)

United States Navy, Test Twenty Eight Definitions

British Standards Institution (BSI), Test Twenty Eight Definitions

  • 19/30355514 DC BS EN 62984-1. High temperature secondary batteries. Part 1. General aspects, definitions and tests
  • BS EN 60068-5-2:2000 Environmental testing. Guide to drafting of test methods. Terms and definitions
  • BS EN ISO 90-1:1999 Light gauge metal containers - Definitions and determination of dimensions and capacities - Open-top cans
  • BS IEC 62529:2012 IEEE standard for signal and test definition
  • BS ISO 18073:2004 Water quality. Determination of tetra- to octa-chlorinated dioxins and furans. Method using isotope dilution HRGC/HRMS
  • BS ISO 9022-1:2016 Tracked Changes. Optics and photonics. Environmental test methods. Definitions, extent of testing
  • BS ISO/IEC/IEEE 29119-1:2013 Software and systems engineering. Software testing. Concepts and definitions
  • BS EN 62697-1:2012 Test methods for quantitative determination of corrosive sulphur compounds in unused and used insulating liquids. Test method for quantitative determination of dibenzyldisulfide (DBDS)
  • BS EN 16855-2:2018 Walk-in cold rooms. Definition, thermal insulation performance and test methods - Customized cold rooms
  • 22/30454212 DC BS EN IEC 60060-1. High-voltage test techniques - Part 1. General definitions and test requirements
  • 21/30396249 DC BS EN IEC 60060-1. High-voltage test techniques. Part 1. General definitions and test requirements
  • 21/30427171 DC BS EN IEC 62475 AMD1. High-current test techniques. Definitions and requirements for test currents and measuring systems
  • BS EN ISO 15883-1:2009+A1:2014 Washer-disinfectors. General requirements, terms and definitions and tests
  • BS EN 62475:2010 High-current test techniques. Definitions and requirements for test currents and measuring systems
  • BS 6057-3.25:1997 Rubber latices. Methods of test. Determination of alkalinity for polychloroprene latex
  • 21/30442579 DC BS EN 4902. Aerospace series. Surface treatments. Definitions and test methods
  • BS EN 14209:2017 Tracked Changes. Preformed plasterboard cornices. Definitions, requirements and test methods
  • BS ISO 21782-1:2019 Electrically propelled road vehicles. Test specification for electric propulsion components - General test conditions and definitions

German Institute for Standardization, Test Twenty Eight Definitions

  • DIN 53290:1982-02 Testing of sandwiches; definitions of terms
  • DIN 58345:2007 Refrigerators for drugs - Definitions, requirements, testing
  • DIN 53815:1989-05 Testing of textiles; definitions for the simple tensile test
  • DIN EN 520:2009-12 Gypsum plasterboards - Definitions, requirements and test methods; German version EN 520:2004+A1:2009
  • DIN EN 12859:2011-05 Gypsum blocks - Definitions, requirements and test methods; German version EN 12859:2011
  • DIN 8942:1995-01 Refrigerating unit system - Definitions, testing, marking
  • DIN 8310:1984-12 Water resistance of watches; definition, requirements, testing / Note: To be replaced by DIN 8310 (2010-09).
  • DIN 8309:1981-02 Antimagnetic properties of watches; definition, requirements, testing
  • DIN 53483-1:1969-07 Testing of Insulating Materials; Determination of Dielectric Properties; Definitions, General Information
  • DIN 75079:2009-11 Emergency car for emergency physcians - Definitions, requirements, test
  • DIN 58970-1:1996 Laboratory centrifuges - Part 1: Definitions, testing, marking
  • DIN 42111-1:1980 Solid state switches; definitions, climatic test categories, measuring methods and testing procedures
  • DIN 83319:2013-04 Fibre ropes - Splices - Definitions, safety requirements, test method / Note: DIN 83319 (1999-06) remains valid alongside this standard until 2013-10-31.
  • DIN 75076:2012-05 Rescue Systems - Intensive care vehicle - Definitions, requirements, testing
  • DIN EN 14209:2017 Preformed plasterboard cornices - Definitions, requirements and test methods
  • DIN EN 14246:2006-09 Gypsum elements for suspended ceilings - Definitions, requirements and test methods; German version EN 14246:2006 / Note: DIN 18169 (1962-12) remains valid alongside this standard until 2008-03-01.
  • DIN EN 14246 Berichtigung 1:2007-11 Gypsum elements for suspended ceilings - Definitions, requirements and test methods; German version EN 14246:2006, Corrigenda to DIN EN 14246:2006-09; German version EN 14246:2006/AC:2007
  • DIN EN 14209:2017-09 Preformed plasterboard cornices - Definitions, requirements and test methods; German version EN 14209:2017
  • DIN EN 13963:2014-09 Jointing materials for gypsum boards - Definitions, requirements and test methods; German version EN 13963:2014
  • DIN 54603:2008-08 Testing of paper, paperboard and board - Determination of glyoxal content
  • DIN 43743:1977 Stabilized supply apparatus for measurement; definitions, expression and testing of performance
  • DIN EN 17634:2021-11 Aerospace series - Surface treatments - Definitions and test methods; English version prEN 4902:2021 / Note: Date of issue 2021-10-15
  • DIN EN 4902:2021-11 Aerospace series - Surface treatments - Definitions and test methods; English version prEN 4902:2021 / Note: Date of issue 2021-10-15
  • DIN EN 14190:2014-09 Gypsum board products from reprocessing - Definitions, requirements and test methods; German version EN 14190:2014
  • DIN EN 607:2005-02 Eaves gutters and fittings made of PVC-U - Definitions, requirements and testing; German version EN 607:2004 / Note: To be replaced by DIN EN 607 (2021-08).
  • DIN EN 13815:2006-12 Fibrous gypsum plaster casts - Definitions, requirements and test methods; German version EN 13815:2006
  • DIN EN 607:2021-08 Eaves gutters and fittings made of PVC-U - Definitions, requirements and testing; German and English version prEN 607:2021 / Note: Date of issue 2021-07-09*Intended as replacement for DIN EN 607 (2005-02).
  • DIN 54603:2008 Testing of paper, paperboard and board - Determination of glyoxal content
  • DIN 51726:2004-06 Testing of solid fuels - Determination of the carbonate carbon dioxide content
  • DIN 96298-1:2016-10 Medical instruments - Terms, measuring methods and tests - Part 1: Terms and definitions
  • DIN 51701-1:2007-12 Testing of solid fuels - Sampling and sample preparation - Part 1: Definitions
  • DIN EN 13950:2014-09 Gypsum board thermal/acoustic insulation composite panels - Definitions, requirements and test methods; German version EN 13950:2014
  • DIN EN 14566:2009-10 Mechanical fasteners for gypsum plasterboard systems - Definitions, requirements and test methods; German version EN 14566:2008+A1:2009 / Note: To be replaced by DIN EN 14566 (2014-11).
  • DIN EN 301126-1:2000-04 Fixed Radio Systems - Conformance testing - Part 1: Point-to-point equipment; definitions, general requirements and test procedures (Endorsement of the English version EN 301126-1 V 1.1.2 (1999-09) as German standard) / Note: Endorsement notice
  • DIN 51901:1980 Testing of carbon materials; determination of density by the xylene method, solid matters
  • DIN 51701-1:2007 Testing of solid fuels - Sampling and sample preparation - Part 1: Definitions
  • DIN ISO 12308:2019-11 Plain bearings - Quality assurance of sample types - Definitions, applications and testing (ISO 12308:2017)
  • DIN EN 15270:2008-03 Pellet burners for small heating boilers - Definitions, requirements, testing, marking; German version EN 15270:2007
  • DIN EN 301126-3-1:2004-06 Fixed Radio Systems - Conformance testing - Part 3-1: Point-to-Point antennas - Definitions, general requirements and test procedures (Endorsement of the English version EN 301126-3-1 V1.1.2 (2002-12) as German standard) / Note: DIN ETS standards colle...
  • DIN EN 16855-2:2020-08 Walk-in cold rooms - Definition, thermal insulation performance and test methods - Part 2: Customized cold rooms; German version EN 16855-2:2018

U.S. Air-Conditioning, Heating, and Refrigeration Institute (US-AHRI), Test Twenty Eight Definitions

  • AHRI 008-2005 TESTING AND RATING STANDARD FOR BASEBOARD RADIATION (Eighth Edition)

Professional Standard - Agriculture, Test Twenty Eight Definitions

  • 水产品质量安全检验手册 8.2.2.2-2005 Chapter 8 Inspection of other harmful substances in aquatic products Section 2 Determination of formaldehyde in aquatic products 2. Determination of formaldehyde in aquatic products (NY 5073-2001) (2) Gas chromatography method
  • 水产品质量安全检验手册 2.8.2.0-2005 Chapter 2 Basic Analysis Methods for Physical and Chemical Testing of Aquatic Products Section 8 Determination of Salt in Aquatic Products (SCT 3011-2001) 2. Potentiometric Titration
  • 水和废水监测分析方法 5.2.8-2003 Chapter Five Water and Wastewater Biological Monitoring Methods Chapter Two Bacteriological Determination in Water Eight Determination of Faecal Streptococcus in Water (B)
  • 水产品质量安全检验手册 7.8.2.2-2005 Chapter 7 Inspection of Additives in Aquatic Products Section 8 Determination of Nutritional Enhancers in Aquatic Products 2. Determination of Taurine (GBT 5009.169-2003) (2) TLC
  • 水产品质量安全检验手册 8.2.2.1-2005 Chapter 8 Inspection of other harmful substances in aquatic products Section 2 Determination of formaldehyde in aquatic products 2. Determination of formaldehyde in aquatic products (NY 5073-2001) (1) Identification method
  • 水产品质量安全检验手册 2.18.2.0-2005 Chapter 2 Basic Analysis Methods for Physical and Chemical Testing of Aquatic Products Section 18 Determination of Acid Value and Acidity in Animal and Vegetable Oils and Fats of Aquatic Products (GBT 5530-1998) 2. Preparation of Oil Samples
  • 水产品质量安全检验手册 6.8.2.2-2005 Chapter 6 Inspection of Elements in Aquatic Products Section 8 Determination of Cadmium in Aquatic Products (GBT 5009.15-2003) 2. Flame Atomic Absorption Spectrometry (2) Dithizone-Butyl Acetate Method
  • 水产品质量安全检验手册 8.1.2.0-2005 Chapter 8 Testing of Other Hazardous Substances in Aquatic Products Section 1 Determination of PCBs in Aquatic Products 2. Gas Chromatography (Test Method)
  • 水产品质量安全检验手册 2.18.1.2-2005 Chapter 2 Basic Analysis Methods for Physical and Chemical Testing of Aquatic Products Section 18 Determination of Acid Value and Acidity in Animal and Vegetable Oils and Fats of Aquatic Products (GBT 5530-1998) 1. Determination of Acid Value and Acidity
  • NY/T 2754-2015 Guidelines for the conduct of tests for distinctness, uniformity and stability.Hylotelephium tatarinowii [Hylotelephium tatarinowii (Maxim.) H. Ohba]
  • 水产品质量安全检验手册 8.2.1.0-2005 Chapter 8 Inspection of Other Hazardous Substances in Aquatic Products Section 2 Determination of Formaldehyde in Aquatic Products 1. Determination of Formaldehyde in Aquatic Products (NY 5172-2002)
  • 水产品质量安全检验手册 7.8.1.0-2005 Chapter 7 Inspection of Additives in Aquatic Products Section 8 Determination of Nutritional Enhancers in Aquatic Products 1. Determination of Eicosapentaenoic Acid (EPA) and Docosahexaenoic Acid (DHA) in Aquatic Products-Gas Phase Chromatography (GBT 500
  • 水产品质量安全检验手册 2.8.1.0-2005 Chapter 2 Basic Analysis Methods for Physical and Chemical Testing of Aquatic Products Section 8 Determination of Salt in Aquatic Products (SCT 3011-2001) 1. Direct Titration Method
  • 水产品质量安全检验手册 8.2.3.0-2005 Chapter 8 Inspection of Other Hazardous Substances in Aquatic Products Section 2 Determination of Formaldehyde in Aquatic Products 3. Determination of Residual Formaldehyde in Water-Soaked (Stained) Food
  • GB 610.2-1988 General method for the determination of arsenic in chemical reagents (silver diethyldithiocarbamate method)
  • 水产品质量安全检验手册 7.8.2.1-2005 Chapter 7 Inspection of Additives in Aquatic Products Section 8 Determination of Nutritional Enhancers in Aquatic Products 2. Determination of Taurine (GBT 5009.169-2003) (1) Liquid Chromatography

PL-PKN, Test Twenty Eight Definitions

  • PN M70053-1974 Non-destructive testing Leak testing Terms and definitions
  • PN E04060-1992 High-voltage test techniques. General definitions and test requirements
  • PN B02850-1964 Fire tests on building materials and structures Definitions
  • PN C04547 ArkusZ01-1974 Water and waste water Tests for carbon dioxide Determination ot free carbon dioxide in water
  • PN C04547 ArkusZ03-1974 Water and waste water Tests for carbon diox?de Determination of aggressivecarbon dioxide in water
  • PN C04614-03-1991 Water and waste water Tests for nickel Determination of nickel by colorimetric method with dimethylglyoxime
  • PN C04608 ArkusZ10-1973 Water and waste water Tests for pesticides Determination of DNOC and dinoseb by thinlayer chromato- graphy method
  • PN C04404-24-1986 Pigments for paints General methods of test Determination of resistance to sulphur dioxide
  • PN C04614-02-1991 Water and waste water Tests for nickel Determination of nickel by colorimetric method with a-f'urildioxime
  • PN Z04068-03-1985 Air purity protection Tests for dimethyl sulphate Determination of dimethyl sulphate in work places by colorimetric method
  • PN Z04144-02-1985 Air purity protection Tests for dibromoethanes Determination of 1,2-dibromethane in work places by turbidimetric method
  • PN C04595-03-1990 Water and waste water Tests for lead Determination of lead by extractivetitrimetric method with sodium diethyldithicarbamate
  • PN C04595 ArkusZ04-1974 Water and waste water Tests for lead Dctermination of lead by dithiocarbamate method
  • PN A79528-16-1993 Spirit (ethyl alcohol) Methods of tests Determination of sulphur dioxide content

Taiwan Provincial Standard of the People's Republic of China, Test Twenty Eight Definitions

Institute of Electrical and Electronics Engineers (IEEE), Test Twenty Eight Definitions

GOSTR, Test Twenty Eight Definitions

American Society for Testing and Materials (ASTM), Test Twenty Eight Definitions

  • ASTM E2282-14(2019) Standard Guide for Defining the Test Result of a Test Method
  • ASTM E2282-09 Standard Guide for Defining the Test Result of a Test Method
  • ASTM F3244-17 Standard Test Method for Navigation: Defined Area
  • ASTM F3244-21 Standard Test Method for Navigation: Defined Area
  • ASTM D3942-03(2013) Standard Test Method for Determination of the Unit Cell Dimension of a Faujasite-Type Zeolite
  • ASTM A370-10 Standard Test Methods and Definitions for Mechanical Testing of Steel Products
  • ASTM A370-12a Standard Test Methods and Definitions for Mechanical Testing of Steel Products
  • ASTM A370-11 Standard Test Methods and Definitions for Mechanical Testing of Steel Products
  • ASTM A370-12 Standard Test Methods and Definitions for Mechanical Testing of Steel Products
  • ASTM A370-13 Standard Test Methods and Definitions for Mechanical Testing of Steel Products
  • ASTM D7736-11 Standard Test Method for Determination of Acids and Glycol Esters in Ethylene Glycol
  • ASTM D7736-19 Standard Test Method for Determination of Acids and Glycol Esters in Ethylene Glycol
  • ASTM D7736-12 Standard Test Method for Determination of Acids and Glycol Esters in Ethylene Glycol
  • ASTM D7736-12(2018) Standard Test Method for Determination of Acids and Glycol Esters in Ethylene Glycol
  • ASTM A340-03a Standard Terminology of Symbols and Definitions Relating to Magnetic Testing
  • ASTM A340-20 Standard Terminology of Symbols and Definitions Relating to Magnetic Testing
  • ASTM A340-19 Standard Terminology of Symbols and Definitions Relating to Magnetic Testing
  • ASTM A340-03 Standard Terminology of Symbols and Definitions Relating to Magnetic Testing
  • ASTM A340-18 Standard Terminology of Symbols and Definitions Relating to Magnetic Testing
  • ASTM A340-19a Standard Terminology of Symbols and Definitions Relating to Magnetic Testing
  • ASTM A340-16e1 Standard Terminology of Symbols and Definitions Relating to Magnetic Testing
  • ASTM A340-17 Standard Terminology of Symbols and Definitions Relating to Magnetic Testing
  • ASTM A340-19b Standard Terminology of Symbols and Definitions Relating to Magnetic Testing
  • ASTM D7126-15 Standard Test Method for On-Line Colorimetric Measurement of Silica
  • ASTM D7126-10 Standard Test Method for On-Line Colorimetric Measurement of Silica
  • ASTM E2679-22 Standard Test Method for Acidity in Mono-, Di-, Tri- and Tetraethylene Glycol by Non-Aqueous Potentiometric Titration
  • ASTM D1756-02(2007) Standard Test Method for Determination as Carbon Dioxide of Carbonate Carbon in Coal
  • ASTM D2426-93(1998) Standard Test Method for Butadiene Dimer and Styrene in Butadiene Concentrates by Gas Chromatography
  • ASTM D2426-19 Standard Test Method for Butadiene Dimer and Styrene in Butadiene Concentrates by Gas Chromatography
  • ASTM D4415-91(2000)e1 Standard Test Methods for Determination of Dimer in Acrylic Acid
  • ASTM D4415-05 Standard Test Methods for Determination of Dimer in Acrylic Acid
  • ASTM D4415-91(1996)e1 Standard Test Methods for Determination of Dimer in Acrylic Acid
  • ASTM D5799-95 Standard Test Method for Determination of Peroxides in Butadiene
  • ASTM D5799-19 Standard Test Method for Determination of Peroxides in Butadiene
  • ASTM E611-08(2015) Standard Test Methods for Low Concentrations of Diethlyene Glycol in Ethylene Glycol by Gas Chromatography
  • ASTM F2866-10 Standard Test Method for Flammability of a Membrane Switch in Defined Assembly
  • ASTM F2866-11(2019) Standard Test Method for Flammability of a Membrane Switch in Defined Assembly
  • ASTM D5799-95(2004) Standard Test Method for Determination of Peroxides in Butadiene
  • ASTM D579-90 Standard Specification for Greige Woven Glass Fabrics
  • ASTM D5799-95(2000)e1 Standard Test Method for Determination of Peroxides in Butadiene
  • ASTM D5799-95(2009) Standard Test Method for Determination of Peroxides in Butadiene
  • ASTM D5799-23 Standard Test Method for Determination of Peroxides in Butadiene
  • ASTM D5799-95(2014) Standard Test Method for Determination of Peroxides in Butadiene
  • ASTM D579-09 Standard Specification for Greige Woven Glass Fabrics
  • ASTM D3906-03(2008) Standard Test Method for Determination of Relative X-ray Diffraction Intensities of Faujasite-Type Zeolite-Containing Materials
  • ASTM D2426-93(2004)e1 Standard Test Method for Butadiene Dimer and Styrene in Butadiene Concentrates by Gas Chromatography
  • ASTM E611-08(2015)e1 Standard Test Methods for Low Concentrations of Diethlyene Glycol in Ethylene Glycol by Gas Chromatography
  • ASTM D2426-93(2009) Standard Test Method for Butadiene Dimer and Styrene in Butadiene Concentrates by Gas Chromatography
  • ASTM D2426-23 Standard Test Method for Butadiene Dimer and Styrene in Butadiene Concentrates by Gas Chromatography
  • ASTM D3906-97 Standard Test Method for Determination of Relative X-ray Diffraction Intensities of Faujasite-Type Zeolite-Containing Materials
  • ASTM UOP824-81 Diethanolamine in Solution by Color Indicator Titration
  • ASTM D7736-19a Standard Test Method for Determination of Acids and Glycol Esters in Glycols

KR-KS, Test Twenty Eight Definitions

  • KS I ISO 18073-2022 Water quality — Determination of tetra- to octa-chlorinated dioxins and furans ― Method using isotope dilution HRGC/HRMS
  • KS C IEC 60060-1-2019 High-voltage test techniques -Part 1: General definitions and test requirements
  • KS C IEC 61180-2020 High-voltage test techniques for low-voltage equipment —Definitions, test and procedure requirements, test equipment
  • KS C IEC 62475-2020 High-current test techniques — Definitions and requirements for test currents and measuring systems
  • KS B ISO 9022-1-2018 Optics and photonics — Environmental test methods — Part 1: Definitions, extent of testing
  • KS C IEC 60068-5-2-2020 Environmental testing — Part 5-2: Guide to drafting of test methods — Terms and definitions
  • KS X ISO/IEC/IEEE 29119-1-2018 Software and systems engineering — Software testing — Part 1: Concepts and definitions

Indonesia Standards, Test Twenty Eight Definitions

  • SNI 07-1346-1989 Magnetic particles, Definition and terminology of test
  • SNI 19-4005-1996 Terms and definitions related to electromagnetic testing
  • SNI 19-3385-1994 Definition of terms related to mechanical test method
  • SNI 07-1336-1989 Test method, definition and terminology of electromagnetic particles
  • SNI 19-1864-1990 Radiographic testing, Definition and terminology
  • SNI 19-3386-1994 Definition of tennis for fatique testing and the stastical analysis of fatique data
  • SNI 07-2198-1991 Metallic coating and other organic materials, Definition and thickness measurement
  • SNI 06-4824-1998 Test methods for free chlorine content in water by visible light spectrophotometers in diethyl phenylendiamine (DPD)

YU-JUS, Test Twenty Eight Definitions

  • JUS M.N5.501-1989 Roa? vvhicles. Motor buses. Terits and definitions
  • JUS U.B0.100-1998 Tesling of soils - Terminolog?, definitions, symbols and units
  • JUS N.A5.541-1989 Eigh-voltage test techniques. General terms and definitions and test reguirements
  • JUS H.G8.311-1987 Reagents. Barium chloride dihydrate. Determination ofbarium chloride dihydrate content. EDTA (disodium salt) complexometric method
  • JUS H.G8.293-1987 Reagents. Oxalic acid dihydrats. Determination ofoxalic and dihydrate content. Volumetric method
  • JUS H.G8.260-1987 Reagents. Barium chloride dihydrste. Measurement ofpH. Potentiometric method
  • JUS U.N5.100-1988 Vitreous china sanitary vare. Definition, quality reguirements and methods of test
  • JUS H.G8.089-1983 Reagents. Calcium sulphate dihydrate. Determination ofcalcium sulphatedihydratecontent. EDTA com- plexometric method
  • JUS H.G8.398-1989 Reagents. Nitric acid. Determination of arsenic content. Silver diethvldithiocarbanate spectrophotometric method
  • JUS H.G8.259-1987 Reagents. Barium chloride dihydrate. Determination of barium chloride dihydrate content. Gravimetric method
  • JUS H.G8.299-1987 Reagents. Oxalic acid dihydrate. Determination ofiron content. Colorimetric method
  • JUS H.G8.018-1980 Reagents. Hydrochloric acid. Determination of arsenic content. Silver diethyldithiocarbonate photome- tric method
  • JUS H.G8.462-1991 Reagents.Potassium sulphate.Determination of arsenic content.Silver diethyldithiocarbamate spectrophotometric method
  • JUS H.G8.073-1983 Reagents. Borje acid. Determination of arsenic content. Silver diethyldithiocarbamate photometric method
  • JUS H.G8.263-1987 Reagents. Barium chloride dihydrate. Determination of iron content. Colorimetric method
  • JUS H.G8.033-1981 Reagents. Sulphuric acid. Determination of arsenic content Silver diethyldithiocarbamate photometric method
  • JUS H.G8.148-1985 Reagents.Ammonium sulphate. Determination of arsenic content Silver diethyldlthiocarbamate photo- metric method
  • JUS H.G8.441-1990 Reaqents. Potassium iodide. Determination of arsenic content. Sil^pr diethyldithiocarbamate spectrophotometric method
  • JUS H.G8.298-1987 Reagents. Oxaiic acid dihydrate. Determination of total nitrogen content. Colorimetric metbod
  • JUS H.G8.095-1983 Reagmts, Cakium aulphate dihydrate. Determination of iron content. Colorimetric method
  • JUS H.G8.261-1987 Reagents. Barium chloride dihydrate. Determination of total nitrogen content. Colorimetric method
  • JUS H.B8.151-1985 Heavy chemlcals. Carbamlde (urea) for Industrlal use. Determlnatlon ad bfuret content Photometrlc method
  • JUS H.G8.297-1987 Reagents. Oxalic acid dihydratt Determination of sulphate content. Turbidimetric method
  • JUS H.G8.296-1987 Reagents. Oxalic aciti dihydrate. Determination of chlorides content. Turbidimetric method

CU-NC, Test Twenty Eight Definitions

  • NC 04-71-1985 Materials Testing. Ultrasound Terms and Definitions
  • NC 97-60-1985 Packaging. Testing Methods Terina and Definitions
  • NC 04-68-1985 Materials Testlng. Non-destructlve Tests by Magnetlc Particles. Terms and Deflnltlons
  • NC 92-01-4-1987 Quality Control. Product Tests. Terms and Definitions
  • NC 04-81-1988 Materials Testing. Industrial Radiology. Terms and Definitions
  • NC 34-62-1988 Agricultural Machineries and Implements. Agricultural Equipment Test. Terms and Definitions

ECIA - Electronic Components Industry Association, Test Twenty Eight Definitions

  • 349-1968 Varistor Definitions and Test Methods
  • 275-A-1971 Thermistor Definitions and Test Methods

NO-SN, Test Twenty Eight Definitions

  • NS 3900-1994 Fire testing. Vocabulary. Terms and definitions
  • NS 4486-1983 Conditioning and testing - Standard atmospheres - Definitions

AENOR, Test Twenty Eight Definitions

  • UNE 7521:1994 CONDITIONING AND TESTING. STANDARD ATMOSPHERES. DEFINITIONS.
  • UNE 67100:2007 Bathroom accesories. Definitions, general characteristics and tests.
  • UNE-EN 12859:2012 Gypsum blocks - Definitions, requirements and test methods
  • UNE-EN 60060-1:2012 High-voltage test techniques - Part 1: General definitions and test requirements
  • UNE-EN 520:2005+A1:2010 Gypsum plasterboards - Definitions, requirements and test methods
  • UNE-EN 61180:2017 High-voltage test techniques for low-voltage equipment - Definitions, test and procedure requirements, test equipment
  • UNE-EN 62475:2012 High-current test techniques - Definitions and requirements for test currents and measuring systems
  • UNE-EN 14209:2017 Preformed plasterboard cornices - Definitions, requirements and test methods
  • UNE-EN 14209:2006 Preformed plasterboard cornices - Definitions, requirements and test methods
  • UNE 56880:2007 Built-in modular wardrobes. Definitions, characteristics and test methods.
  • UNE-EN 61180-1:1996 HIGH-VOLTAGE TEST TECHNIQUES FOR LOW-VOLTAGE EQUIPMENT. PART 1: DEFINITIONS, TEST AND PROCEDURE REQUIREMENTS.
  • UNE-EN 60060-3:2006 High voltage test techniques -- Part 3: Definitions and requirements for on-site tests (IEC 60060-3:2006).
  • UNE-EN 607:2006 Eaves gutters and fittings made of PVC-U - Definitions, requirements and testing
  • UNE-EN 12970:2001 MASTIC ASPHALT FOR WATERPROOFING. DEFINITIONS, REQUIREMENTS AND TEST METHODS.
  • UNE-EN 15270:2009 Pellet burners for small heating boilers - Definitions, requirements, testing, marking
  • UNE 21344:1976 ELECTRIC INSULATING MATERIALS. VARNISHED FABRICS. DEFINITIONS, GENERAL REQUIREMENTS AND TEST METHODS.
  • UNE 40498:1984 SAMPLING IN TEXTILE TESTS. DEFINITION OF THE STALISTICAL PARAMETERS TO BE CONSIDERED

Professional Standard - Post and Telecommunication, Test Twenty Eight Definitions

ECSS - European Cooperation for Space Standardization, Test Twenty Eight Definitions

  • E-ST-70-31C-2008 Ground systems and operations - Monitoring and control data definition (Second Issue)

Standard Association of Australia (SAA), Test Twenty Eight Definitions

未注明发布机构, Test Twenty Eight Definitions

ES-UNE, Test Twenty Eight Definitions

  • UNE-EN 61969-1:2012 Gypsum blocks - Definitions, requirements and test methods
  • UNE-EN 61969-3:2012 Gypsum blocks - Definitions, requirements and test methods
  • UNE-EN 12860/AC:2002 Gypsum base adhesives for gypsum blocks - Definitions, requirements and test methods.
  • UNE-EN 14566+A1:2009 Mechanical fasteners for gypsum plasterboard systems - Definitions, requirements and test methods
  • UNE-EN 301126-3-1 V1.1.2:2005 Fixed Radio Systems; Conformance testing; Part 3-1: Point-to-Point antennas; Definitions, general requirements and test procedures (Endorsed by AENOR in October of 2005.)
  • UNE-EN 16855-2:2021 Walk-in cold rooms - Definition, thermal insulation performance and test methods - Part 2: Customized cold rooms

Professional Standard - Pharmaceutical Packaging, Test Twenty Eight Definitions

TR-TSE, Test Twenty Eight Definitions

  • TS 2325-1976 GENERAL METHODS OF TEST FOR PIGMENTS PART — VIII DETERMINATION OF MATTER SOLUBLE ?N WATER (COLD EXTRACTION METHOD)
  • TS 3008-1978 HIGH - VOLTAGE TEST TECHNIQUES PART 1 - GENERAL DEFINITIONS AND TEST REQUIREMENTS
  • TS 1861-1975 CINEMATOGRAPHY — MOTION — PICTURE SAFETY F?LM — DEFINITION, TESTING AND MARKING

International Organization for Standardization (ISO), Test Twenty Eight Definitions

  • ISO 18073:2004 Water quality - Determination of tetra- to octa-chlorinated dioxins and furans - Method using isotope dilution HRGC/HRMS
  • ISO 90-1:1986 Light gauge metal containers; Definitions and determination methods for dimensions and capacities; Part 1 : Open-top cans
  • ISO/IEC/IEEE 29119-1:2013 Software and systems engineering.Software testing.Part 1: Concepts and definitions
  • ISO/IEC IEEE CD 29119-1:2020 Software and systems engineering Software testing Part 1 : — Concepts and definitions
  • ISO 6894:1991 Rubber compounding ingredients; carbon black; preparation of samples for determination of dibutylphthalate absorption number (compressed sample)
  • ISO 1389-6:1977 Phthalic anhydride for industrial use; Methods of test; Part VI : Determination of phthalic anhydride content; Titrimetric method
  • ISO 1390-4:1977 Maleic anhydride for industrial use; Methods of test; Part IV : Determination of maleic anhydride content; Titrimetric method

GM Daewoo, Test Twenty Eight Definitions

Danish Standards Foundation, Test Twenty Eight Definitions

  • DS/EN 12859:2011 Gypsum blocks - Definitions, requirements and test methods
  • DS/EN 60060-1:2011 High-voltage test techniques – Part 1: General definitions and test requirements
  • DS/ISO 18073:2007 Water quality - Determination of tetra- to octa-chlorinated dioxins and furans - Method using isotope dilution HRGC/HRMS
  • DS/EN 520+A1:2009 Gypsum plasterboards - Definitions, requirements and test methods
  • DS/EN 62475:2011 High-current test techniques - Definitions and requirements for test currents and measuring systems
  • DS/EN 14209/ZA:2007 Preformed plasterboard cornices - Definitions, requirements and test methods
  • DS/EN 14209:2006 Preformed plasterboard cornices - Definitions, requirements and test methods
  • DS/ISO 90-1:1987 Light gauge metal containers. Definitions and determination methods for dimensions and capacities. Part 1: Open-top cans
  • DS/EN 607:2005 Eaves gutters and fittings made of PVC-U - Definitions, requirements and testing
  • DS/EN 301126-1 V1.1.2:2000 Fixed Radio Systems; Conformance testing; Part 1: Point-to-Point equipment -Definitions, general requirements and test procedures
  • DS 2354:1990 Micrometers. Micrometer caliper heads, depth micrometer. terms, definitions and technical testing
  • DS/EN 15270:2012 Pellet burners for small heating boilers - Definitions, requirements, testing, marking
  • DS/ISO/IEC/IEEE 29119-1:2013 Software and systems engineering - Software testing - Part 1: Concepts and definitions
  • DS/EN 301126-3-1 V1.1.2:2005 Fixed Radio Systems; Conformance testing; Part 3-1: Point-to-Point antennas; Definitions, general requirements and test procedures
  • DS/EN 301126-3-1 V1.1.1:2001 Fixed Radio Systems; Conformance testing; Part 3-1: Point-to-Point antennas; Definitions, general requirements and test procedures

Lithuanian Standards Office , Test Twenty Eight Definitions

  • LST EN 12859-2011 Gypsum blocks - Definitions, requirements and test methods
  • LST EN 520-2005+A1-2010 Gypsum plasterboards - Definitions, requirements and test methods
  • LST 1402-2-1995/1K-2004 International rules for seed testing. Sampling, definitions, methods
  • LST 1402-2-1995 International rules for seed testing. Sampling, definitions, methods
  • LST EN 14209-2006 Preformed plasterboard cornices - Definitions, requirements and test methods
  • LST EN 62475-2011 High-current test techniques - Definitions and requirements for test currents and measuring systems (IEC 62475:2010)
  • LST EN 60060-1-2011 High-voltage test techniques -- Part 1: General definitions and test requirements (IEC 60060-1:2010)
  • LST EN 60060-3-2006 High voltage test techniques - Part 3: Definitions and requirements for on-site tests (IEC 60060-3:2006)
  • LST EN 60060-3-2006/AC-2007 High voltage test techniques - Part 3: Definitions and requirements for on-site tests (IEC 60060-3:2006)
  • LST EN 301 126-3-2 V1.1.1-2002 Fixed Radio Systems; Conformance testing; Point - to -Multipoint antennas; Definitions, general requirements and test procedures
  • LST EN 607-2005 Eaves gutters and fittings made of PVC-U - Definitions, requirements and testing
  • LST EN 60068-5-2-2004 Environmental testing. Part 5-2: Guide to drafting of test methods. Terms and definitions (IEC 60068-5-2:1990)
  • LST EN 301 126-1 V1.1.2-2002 Fixed Radio Systems; Conformance testing; Part 1: Point-to-Point equipment -Definitions, general requirements and test procedures
  • LST EN 15270-2008 Pellet burners for small heating boilers - Definitions, requirements, testing, marking
  • LST EN 61180-1-2001 High-voltage test techniques for low-voltage equipment. Part 1: Definitions, test and procedure requirements (IEC 61180-1:1992)
  • LST EN 301 126-3-1 V1.1.2-2007 Fixed Radio Systems;Conformance testing;Part 3-1: Point-to-Point antennas;Definitions, general requirements and test procedures
  • LST EN 301 126-3-1 V1.1.1-2007 Fixed Radio Systems;Conformance testing;Part 3-1: Point-to-Point antennas;Definitions, general requirements and test procedures

工业和信息化部, Test Twenty Eight Definitions

  • YD/T 4014-2022 Software-Defined Optical Transport Network (SDOTN) Test Method
  • YD/T 3842-2021 Software-defined packet transport network testing method

Professional Standard - Medicine, Test Twenty Eight Definitions

Society of Automotive Engineers (SAE), Test Twenty Eight Definitions

  • SAE ARP1665A-1997 Definition of Pressure Surge Test and Measurement Methods for Receiver Aircraft
  • SAE ARP1665A-2007 Definition of Pressure Surge Test and Measurement Methods for Receiver Aircraft
  • SAE AS6416-2022 Bolts, Screws, Studs, and Nuts, Definitions for Design, Testing and Procurement
  • SAE DINSAESPEC91381-2019 Terms and Definitions Related to Testing of Automated Vehicle Technologies

IN-BIS, Test Twenty Eight Definitions

International Telecommunication Union (ITU), Test Twenty Eight Definitions

  • ITU-R REPORT 804-1978 DEFINITIONS OF PARAMETERS FOR AUTOMATIC MEASUREMENT OF TELEVISION INSERTION TEST SIGNALS
  • ITU-R RAPPORT BT.804 FRENCH-1978 DEFINITIONS OF PARAMETERS FOR AUTOMATIC MEASUREMENT OF TELEVISION INSERTION TEST SIGNALS
  • ITU-T Z.169-2012 (Pre-Published) Testing and Test Control Notation version 3: TTCN-3 mapping from XML data definition
  • ITU-R REPORT BT.804-1978 DEFINITIONS OF PARAMETERS FOR AUTOMATIC MEASUREMENT OF TELEVISION INSERTION TEST SIGNALS
  • ITU-T G.650.1 FRENCH-2004 Definitions and test methods for linear, deterministic attributes of single-mode fibre and cable D閒initions et methodes de test applicables aux attributs lineaires deterministes des fibres et cables optiques monomodes
  • ITU-T G.650.1 SPANISH-2004 Definitions and test methods for linear, deterministic attributes of single-mode fibre and cable Definiciones y metodos de prueba de los atributos lineales y determin韘ticos de fibras y cables monomodo

ITU-R - International Telecommunication Union/ITU Radiocommunication Sector, Test Twenty Eight Definitions

  • REPORT BT.804-1978 DEFINITIONS OF PARAMETERS FOR AUTOMATIC MEASUREMENT OF TELEVISION INSERTION TEST SIGNALS

SAE - SAE International, Test Twenty Eight Definitions

  • SAE AS6416-2017 Bolts@ Screws@ Studs@ and Nuts@ Definitions for Design@ Testing and Procurement
  • SAE ARP1665-1983 Definition of Pressure Surge Test and Measurement Methods for Receiver Aircraft

International Electrotechnical Commission (IEC), Test Twenty Eight Definitions

  • IEC 61180:2016 High-voltage test techniques for low-voltage equipment - Definitions, test and procedure requirements, test equipment
  • IEC 62697-1:2012 Test methods for quantitative determination of corrosive sulfur compounds in unused and used insulating liquids - Part 1: Test method for quantitative determination of dibenzyldisulfide (DBDS)
  • IEC 62475:2010 High-current test techniques - Definitions and requirements for test currents and measuring systems

European Committee for Electrotechnical Standardization(CENELEC), Test Twenty Eight Definitions

  • EN 61180:2016 High-voltage test techniques for low-voltage equipment - Definitions, test and procedure requirements, test equipment
  • EN 62475:2010 High-current test techniques - Definitions and requirements for test currents and measuring systems

国家食品药品监督管理局, Test Twenty Eight Definitions

RO-ASRO, Test Twenty Eight Definitions

  • SR CEI 68-5-2-1993 Environmental testing. Part 5: Guide to drafting of test methods - Terms and definitions
  • STAS SR EN 20090-2-1996 Light gauge metal containere - Definitions and determination methods for dimensions and capacities - Part 2: General use containere
  • STAS 9542-1974 PRODUCTS OF CARBON Determination of carbon dioxide reactivity on mould tost specimens

American Society of Mechanical Engineers (ASME), Test Twenty Eight Definitions

(U.S.) Joint Electron Device Engineering Council Soild State Technology Association, Test Twenty Eight Definitions

National Metrological Verification Regulations of the People's Republic of China, Test Twenty Eight Definitions

Professional Standard - Military and Civilian Products, Test Twenty Eight Definitions

  • WJ 2506-1998 Verification Regulations for Photodiode Dynamic Tester

国家药监局, Test Twenty Eight Definitions

ZA-SANS, Test Twenty Eight Definitions

  • SANS 60060-3:2006 High-voltage test techniques Part 3: Definitions and requirements for on-site testing
  • SANS 12308:2005 Plain bearings - Quality assurance - Sample types - Definitions, applications and testing

RU-GOST R, Test Twenty Eight Definitions

  • GOST R 50484-1993 Phthalic anhydride for industrial use. Methods of test. Part 4. Determination of phthalic anhydride content. Titrimetric method
  • GOST IEC 60695-4-2021 Fire hazard testing of electrotechnical products. Terms and definitions
  • GOST R IEC 61034-1-2005 Measurement of smoke density of cables burning under defined conditions. Part 1. Test apparatus
  • GOST R ISO 1390-4-1993 Maleic anhydride for industrial use. Methods of test. Part 4. Determination of maleic anhydride content. Titrimetric method
  • GOST R ISO 1390/4-1993 Maleic anhydride for industrial use. Methods of test. Part 4. Determination of maleic anhydride content. Titrimetric method
  • GOST R 52081-2003 Non-destructive testing. Method of metal magnetic memory. Terms and definitions
  • GOST 33288-2015 Residual fuel oils. Test for straight-run. Method for determination of xylene equivalent
  • GOST R 50837.4-1995 Residual fuel oils. Test for straight-run. Method for determination of xylene equivalent
  • GOST R 57226-2016 Plastics. Determination of the degree of disintegration under defined composting conditions in a pilot-scale test
  • GOST R IEC 61034-2-2005 Measurement of smoke density of cables burning under defined conditions. Part 2. Test procedure and requirements
  • GOST R 56920-2016 Software and systems engineering. Software testing. Part 1. Concepts and definitions
  • GOST R ISO 15883-1-2008 Washer-disinfectors. Part 1. General requirements, terms, definitions and tests

CO-ICONTEC, Test Twenty Eight Definitions

Professional Standard - Electron, Test Twenty Eight Definitions

  • SJ 2138-1982 Methods of measurement for regulated current of silicon current regulator diodes

Association of German Mechanical Engineers, Test Twenty Eight Definitions

  • VDI 4478 Blatt 1-2013 Test procedure for standardizing the definition of performance of RFID gates for use in libraries
  • VDI/VDE 5570 Blatt 1-2006 Testing of connectorised and non-connectorised polymer optical fibres - Terms and definitions

ITU-T - International Telecommunication Union/ITU Telcommunication Sector, Test Twenty Eight Definitions

  • ITU-T Q.4061-2019 Framework for software-defined network controller testing (Study Group 11)
  • ITU-T Z.169-2011 Testing and Test Control Notation version 3: TTCN-3 mapping from XML data definition (Study Group 17)

American National Standards Institute (ANSI), Test Twenty Eight Definitions

  • ANSI/HI 5.1-5.6-2010 Sealless Rotodynamic Pumps for Nomenclature, Definitions, Application, Operation, and Test

Professional Standard - Light Industry, Test Twenty Eight Definitions

  • QB/T 2718-2005 Leather-Chemical test-Determination of matter soluble in dichloromethane
  • QB/T 2718-2018 Determination of dichloromethane extract in leather chemical test

VE-FONDONORMA, Test Twenty Eight Definitions

国家市场监督管理总局、中国国家标准化管理委员会, Test Twenty Eight Definitions

  • GB/T 39333-2020 Plain bearings—Quality assurance of sample types—Definitions, applications and testing
  • GB/T 38634.1-2020 Systems and software engineering—Software testing—Part 1:Concepts and definitions

IT-UNI, Test Twenty Eight Definitions

Canadian Standards Association (CSA), Test Twenty Eight Definitions

  • CSA P.6-2009 Test method for measuring thermal efficiency of gas-fired pool heaters (Second Edition)

US-CFR-file, Test Twenty Eight Definitions

  • CFR 40-1065.1001-2014 Protection of Environment. Part1065:Engine-testing procedures. Section1065.1001:Definitions.
  • CFR 40-790.3-2013 Protection of Environment. Part790:Procedures governing testing consent agreements and test rules. Section790.3:Definitions.

US-HI, Test Twenty Eight Definitions

  • HI 5.1-5.6-2010 Sealless Rotodynamic Pumps fpr Namenclature, Definitions, Application, Operation, and test
  • HI 4.1-4.6-2000 Sealless Rotary Pumps for Nomenclature, Definitions, Applications, Operation and Test
  • HI 5.1-5.6-2000 Sealless Centrifugal Pumps for Nomenclature, Definitions, Application, Operation and Testhgx

CEN - European Committee for Standardization, Test Twenty Eight Definitions

  • PREN 14566-2014 Mechanical fasteners for gypsum board systems - Definitions@ requirements and test methods

ANSI - American National Standards Institute, Test Twenty Eight Definitions

  • X9.100-40-1-2008 Specifications for Check Image Tests Part 1: Definition of Elements and Structures for Check Image Tests (ASCX9)

ETSI - European Telecommunications Standards Institute, Test Twenty Eight Definitions

  • ETSI EN 301 126-1:1999 Fixed Radio Systems; Conformance Testing; Part 1: Point-to-Point Equipment - Definitions@ General Requirements and Test Procedures (V1.1.2)




Copyright ©2007-2023 ANTPEDIA, All Rights Reserved