ZH
RU
ES
metrology test definition
metrology test definition, Total:499 items.
In the international standard classification, metrology test definition involves: Ground service and maintenance equipment, Vocabularies, Ergonomics, Metrology and measurement in general, Character symbols, Quality, Tobacco, tobacco products and related equipment, Wastes, Measurement of time, velocity, acceleration, angular velocity, Electrical and electronic testing, Electricity. Magnetism. Electrical and magnetic measurements, Electrical accessories, Non-destructive testing, Applications of information technology, Environmental protection, Packaging materials and accessories, Packaging and distribution of goods in general, Audio, video and audiovisual engineering, Rectifiers. Convertors. Stabilized power supply, Astronomy. Geodesy. Geography, Acoustics and acoustic measurements, Electromechanical components for electronic and telecommunications equipment, Optics and optical measurements, Linear and angular measurements, Clothes, Mobile services, Geology. Meteorology. Hydrology, Analytical chemistry, Measurement of fluid flow, Radiation measurements, Pharmaceutics, Kitchen equipment, Chipless working equipment, Software development and system documentation, Air quality, Bearings, Test conditions and procedures in general, Water quality, Pumps, Road vehicle systems, Special measuring equipment for use in telecommunications, Medical equipment, Jewellery, Telecommunication systems, Inorganic chemicals, Diagnostic, maintenance and test equipment, Horology, Measurement of volume, mass, density, viscosity, Radiation protection, Photography, Thermodynamics and temperature measurements, Resistors, Environmental testing, Fruits. Vegetables, Construction materials, Electromagnetic compatibility (EMC), Industrial automation systems, Road vehicles in general, Laundry appliances, Cans. Tins. Tubes, Ferrous metals, Protective equipment, Electronic components in general, Languages used in information technology, Aerospace engines and propulsion systems, Construction equipment, Microbiology, Road engineering.
IT-UNI, metrology test definition
United States Navy, metrology test definition
National Metrological Technical Specifications of the People's Republic of China, metrology test definition
- JJF 1009-1987 Terminology and Definitions for Measurement of Capacity and Density
- JJF 1035-1992 Ionizing Radiation Metrological Terms
- JJF 1032-1992 Terms and Their Definitions for Optical Radiation Measurement
- JJF 1009-2006 Metrological Terms and Definitions for Capacity
- JJF 1013-1989 Terms in Common Use and Their Difinition for the Magnetic Metrology
- JJF 1004-2004 Metrological Terms and Their Definitions for Flow Rate
- JJF 1034-2020 Terms and Definitions for Acoustical Metrology
- JJF 1001-1998 General Terms in Metrology and Their Definitions
- JJF 1001-2011 General Terms in Metrology and Their Definitions
- JJF 1001 COR-1998 General Metrology Terms and Definitions
- JJF 1265-2022 Biometric terms and definitions
- JJF 1011-1987 Terminology and Definitions for Measurement of Force and Hardness
- JJF 1229-2009 Mass and Density Terms in Metrology and Their Definitions
- JJF 1229-2021 Mass and Density Metrological Terms and Their Definitions
- JJF 1675-2017 Terminology and Definition for Measurement of Inertial Technology
- JJF 1008-2008 Pressure Metrological Terms and Their Definitions
- JJF 1008-1987 Pressure Metrological Terms and Their Definitions
- JJF 1010-1987 Length Metrological Terms and Their Definitions
- JJF 1034-2005 Metrological Terms and their Definitions for Acoustics
- JJF 1035-2006 Metrological Terms and Their Definitions for Ionizing Radiation
- JJF 1181-2007 Weighing Instrument Term in Metrology and Their Definitions
- JJF 1007-2007 Temperature Metrological Terms and Their Definitions
- JJF 1265-2010 Terms and Definitions for Biometrology
- JJF 1188-2008 Terms and Their Definitions for Radio Measurement
- JJF 1011-2006 Terminology and Definitions for Metrology of Force and Hardness
- JJF 1032-2005 Terminology and Derfinitions for Optical Radiation Measurements
- JJF 1156-2006 Terminology and Definitions for Measurement of Vibration, Shock and Rotating Velocity
- JJF 1180-2007 Glossary and Definition of Time and Frequency Metrology
- JJF 1012-2007 Humidity and Moisture Metrological Terms and Their Definitions
Association Francaise de Normalisation, metrology test definition
- NF EN ISO 7250-1:2017 Définitions des mesures de base du corps humain pour la conception technologique - Partie 1 : définitions des mesures du corps et repères
- NF V37-025*NF ISO 9512:2019 Cigarettes - Determination of ventilation - Definitions and measurement principles
- NF H96-120:2006 Identification and/or determination of the quantity of waste.
- NF X35-003-1*NF EN ISO 7250-1:2017 Basic human body measurements for technological design - Part 1 : Body measurement definitions and landmarks
- NF H60-135*NF EN 13439:2003 Packaging - Rate of energy recovery - Definition and method of calculation.
- NF EN 13439:2003 Emballage - Taux de valorisation énergétique - Définition et méthode de calcul
- NF X35-003-1:2010 Basic human body measurements for technological design - Part 1 : body measurement definitions and landmarks.
- NF C97-610:1986 Hearing aids. Definitions and measuring methods.
- NF V37-025:2003 Cigarettes - Determination of ventilation - Definitions and measurement principles.
- NF V37-025:1993 Cigarettes. Determination of ventilation. Definitions and measurment principles.
- NF ISO 9512:2019 Cigarettes - Détermination du taux de ventilation - Définitions et principes de mesurage
- NF X06-041-1*NF ISO 5725-1:1994 Application of statistics. Accuracy (trueness and precision) of measurement methods and results. Part 1 : general principles and definitions.
- NF EN 28653:1993 Bijouterie - Grandeurs de bague - Définition, mesurage et désignations.
- NF C41-109*NF EN 62475:2011 High-current test techniques - Definitions and requirements for test currents and measuring systems.
- NF T90-021:1962 TESTING WATER. PHOTOMETRIC DETERMINATION OF IODINE.
- FD X07-018:1997 Metrology. Company metrology. Data sheet for measuring, inspection and test equipment.
- NF EN ISO 8559-1:2020 Désignation des tailles de vêtements - Partie 1 : définitions anthropométriques pour la mesure du corps
- NF A70-010*NF EN 28653:1993 Jewellery. Ring-sizes. Definition, mesurage et designations.
- NF EN 520+A1:2009 Plaques de plâtre - Définitions, exigences et méthodes d'essai
- NF EN 520/IN1:2009 Plaques de plâtre - Définitions, exigences et méthodes d'essai
- NF EN 12859:2011 Carreaux de plâtre - Définitions, spécifications et méthodes d'essai
- NF X43-572*NF EN ISO 9169:2006 Air quality - Definition and determination of performance characteristics of an automatic measuring system
- NF EN ISO 9169:2006 Qualité de l'air - Définition et détermination de caractéristiques de performance d'un système automatique de mesurage
- NF T90-004:1985 Testing water. Determination of fluoride ion. Potentiometric method.
- NF X06-011:1973 STATISTICS AND QUALITY. DEFINITION,CHOICE AND SPECIFICATION OF THE QUALITY OF A SUPPLY OF INDUSTRIAL PRODUCTS.
- FD X07-021:1999 Fundamental standards - Metrology and application of the statistics - Help to the process for the estimation and the use of the measurement and test results uncertainty
- NF EN 13815:2006 Produits en staff - Définitions, prescriptions et méthodes d'essai
- NF P93-550:1987 Scaffoldls. Metallic shoring towers made of prefabricated elements.
- NF EN ISO 19036:2019 Microbiologie de la chaîne alimentaire - Estimation de l'incertitude de mesure pour les déterminations quantitatives
- NF P98-200-1:1991 Road testing. Measurement of a rolling load deflection. Part 1 : definitions, measurements, specific values.
VE-FONDONORMA, metrology test definition
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, metrology test definition
- GB/T 42565-2023 Quantum computing—Terminology and definition
- GB/T 17308-1998 Definitions of parameters for simplified automatic measurement of television insertion test signals
- GB/T 19610-2004 Cigarettes-Determination of ventilation-Definitions and measurement principles
- GB/T 7234-1987 Measurement of roundness--Terms,definitions and parameters of roundness
- GB/T 11888-2014 Jewellery.Ring-size.Definition,measurement and designation
- GB/T 11888-2001 Jewellery--Ring-size--Definition, measurement and designation
- GB/T 17212-1998 Industrial-process measurement and control. Terms and definitions
CU-NC, metrology test definition
- NC 90-09-08-1984 Metrological Assurance. Hardness Measurement. Terms, Definitions and Symbols
- NC 90-13-38-1986 Metrological Assurance. Measurements of Gases Humiditv Terms and Definitions
- NC 90-11-01-1986 Metrological Assurance. Time and Frequency Measurements Terms and Definitions
- NC 92-01-4-1987 Quality Control. Product Tests. Terms and Definitions
- NC 92-01-3-1985 Quality Control. Statistical Quality Control. Terms Definitions and Symbols
- NC 99-48-1987 Computing. Reparation and Maintenance Quality Indexes Terms, Definitions and Symbols
- NC 90-13-13-1987 Metrological Assurance. Measurements with pH Meters. General Rules.
- NC 04-71-1985 Materials Testing. Ultrasound Terms and Definitions
- NC 97-60-1985 Packaging. Testing Methods Terina and Definitions
- NC 90-13-35-1985 Metrological Assurance pH Meters. Testing Methods
- NC 90-02-1971 Terms, definitions and units. Pressure measuring instruments
- NC 04-68-1985 Materials Testlng. Non-destructlve Tests by Magnetlc Particles. Terms and Deflnltlons
- NC 90-13-36-1986 Metrological Assurance Conductometers. Testing Methods
- NC 90-06-40-1984 Metrological Assurance. Leaf Tobacco. Measurement of Mass. Accuracy
Danish Standards Foundation, metrology test definition
- DS 2354:1990 Micrometers. Micrometer caliper heads, depth micrometer. terms, definitions and technical testing
- DS/EN 62475:2011 High-current test techniques - Definitions and requirements for test currents and measuring systems
- DS/EN ISO 7250-1:2010 Basic human body measurements for technological design - Part 1: Body measurement definitions and landmarks
- DS/EN 13439:2003 Packaging - Rate of energy recovery - Definition and method of calculation
- DS 2010:1985 Gauge bloks. Terms and definitions, technical requirements, measurements
- DS/ISO 17714:2007 Meteorology - Air temperature measurements - Test methods for comparing the performance of thermometer shields/screens and defining important characteristics
- DS/EN ISO 9169:2006 Air quality - Definition and determination of performance characteristics of an automatic measuring system
- DS 2362-1:1994 Measuring equipment-Inclination measuring instruments-Part 1:Inclination measuring instruments (levels)-Definitions,requirements,testing
- DS/EN 28 653:1993 Jewellery - Ring-sizes - Definition, measurement and designation
- DS/EN 28653:1993 Jewellery. Ring-sizes. Definition, measurement and designation
- DS/ISO 6318:1990 Measurement of roundness. Terms, definitions and parameters of roundness
- DS/EN 12859:2011 Gypsum blocks - Definitions, requirements and test methods
- DS/EN 60060-1:2011 High-voltage test techniques – Part 1: General definitions and test requirements
PT-IPQ, metrology test definition
British Standards Institution (BSI), metrology test definition
- BS EN ISO 7250-1:2010 Basic human body measurements for technological design - Body measurement definitions and landmarks
- BS EN ISO 7250-1:2017 Tracked Changes. Basic human body measurements for technological design. Body measurement definitions and landmarks
- BS ISO 8559-1:2017 Size designation of clothes. Anthropometric definitions for body measurement
- BS EN ISO 8559-1:2020 Size designation of clothes - Anthropometric definitions for body measurement
- BS ISO 9512:2003 Cigarettes - Determination of ventilation - Definitions and measurement principles
- BS ISO 9512:2019 Tracked Changes. Cigarettes. Determination of ventilation. Definitions and measurement principles
- BS EN 62475:2010 High-current test techniques. Definitions and requirements for test currents and measuring systems
- BS IEC 60692:1999 Nuclear instrumentation. Density gauges utilizing ionizing radiation. Definitions and test methods
- 21/30427171 DC BS EN IEC 62475 AMD1. High-current test techniques. Definitions and requirements for test currents and measuring systems
- BS EN IEC 62052-11:2021+A11:2022 Electricity metering equipment. General requirements, tests and test conditions - Metering equipment
- BS EN 28653:1993 Jewellery - Ring-sizes - Definition, measurement and designation
- BS ISO 17714:2007 Meteorology. Air temperature measurements. Test methods for comparing the performance of thermometer shields/screens and defining important characteristics
- BS ISO/IEC 14143-1:2008 Information technology. Software measurement. Functional size measurement. Definition of concepts
- BS ISO/IEC 14143-1:2007 Information technology - Software measurement - Functional size measurement - Definition of concepts
- BS EN 60068-5-2:2000 Environmental testing. Guide to drafting of test methods. Terms and definitions
- BS EN 1434-5:2007 Heat meters - Initial verification tests
- BS PD ISO/TS 21002:2021 Road vehicles. Multidimensional measurement and coordinate systems definition
- PD ISO/TS 21002:2021 Road vehicles. Multidimensional measurement and coordinate systems definition
- BS EN 17116-2:2018 Specifications for industrial laundry machines. Definitions and testing of capacity and consumption characteristics - Batch drying tumblers
- BS ISO 9398-3:2003 Specifications for industrial laundry machines - Definitions and testing of capacity and consumption characteristics - Washing tunnels
- BS IEC 61336:1996 Nuclear instrumentation. Thickness measurement systems utilizing ionizing radiation. Definitions and test methods
- BS EN 62496-2:2017 Optical circuit boards. Basic test and measurement procedures - General guidance for definition of measurement conditions for optical characteristics of optical circuit boards
- BS IEC 62529:2012 IEEE standard for signal and test definition
- BS ISO 17713-1:2007 Meteorology. Wind measurements. Wind tunnel test methods for rotating anemometer performance
- BS EN 17116-4:2019 Specifications for industrial laundry machines. Definitions and testing of capacity and consumption characteristics - Washer-extractors
- BS EN ISO 19036:2019 Microbiology of the food chain. Estimation of measurement uncertainty for quantitative determinations
SAE - SAE International, metrology test definition
- SAE J2944-2015 Operational Definitions of Driving Performance Measures and Statistics
- SAE ARP1665-1983 Definition of Pressure Surge Test and Measurement Methods for Receiver Aircraft
- SAE J2817-2019 Definition and Measurement of Torque Biasing Differentials
Professional Standard - Aerospace, metrology test definition
- QJ 826-1984 Definition of Computerized Automatic Measurement and Control (CAMAC) Terms
Society of Automotive Engineers (SAE), metrology test definition
- SAE J2944-2023 Operational Definitions of Driving Performance Measures and Statistics
- SAE ARP1665A-2007 Definition of Pressure Surge Test and Measurement Methods for Receiver Aircraft
- SAE AS6416-2022 Bolts, Screws, Studs, and Nuts, Definitions for Design, Testing and Procurement
- SAE J3218-2022 Definition and Measurement of Beam Axle Efficiency
- SAE J2817-2008 Definition and Measurement of Torque Biasing Differentials
- SAE J2789-2010 Inertia Calculation for Single-Ended Inertia-Dynamometer Testing
- SAE ARP1665A-1997 Definition of Pressure Surge Test and Measurement Methods for Receiver Aircraft
CZ-CSN, metrology test definition
- CSN 01 0215-1986 Statistical quality control. Terms and de-finitions
- CSN 35 6507-1982 Electronic measuring instrumenta. Fundamental terms, definitions and generál tesling conditions
- CSN 80 0073-1972 General definitions for tensile strength testing
GOSTR, metrology test definition
RU-GOST R, metrology test definition
- GOST 16263-1970 State system for ensuring the uniformity of measurements. Metrology. Terms and definitions
- GOST R 50779.11-2000 Statistical methods. Statistical quality control. Terms and definitions
- GOST 20906-1975 Measuring means for magnetic quantities. Terms and definitions
- GOST R 52369-2005 Phototopography. Terms and definitions
- GOST R 51833-2001 Photogrammetry. Terms and definitions
- GOST 22268-1976 Geodetisy. Terms and definitions
- GOST 23778-1979 Optical polarized measurements. Terms and definitions
- GOST 19156-1979 Ground navigation ordometric apparatus. Terms and definitions
- GOST R ISO 7250-1-2013 Ergonomics. Basic human body measurements for technological design. Part 1. Body measurement definitions and landmarks
- GOST R 50381-1992 Photogrammetric instruments. Terms and definitions
- GOST R 8.639-2013 State system for ensuring the uniformity of measurements metrological ensuring of the chemical weapons destruction. Terms and definitions
- GOST 16465-1970 Measuring radiotechnical signals. Terms and definitions
- GOST 17562-1972 Measuring instruments for functional diagnostic. Terms and definitions
- GOST R ISO 3635-1999 Clothes. Dimensions. Definitions, designation and measurement requirements
- GOST R 8.639-2008 State system for ensuring the uniformity of measurements. Metrological ensuring of the chemical weapons destruction. Terms and definitions
- GOST 21910-1976 Metals. Helt-resistance characteristics. Names, definitions, formulae for calculations and units of quantities
- GOST 14337-1978 Ionizing radiation measuring instruments. Terms and definitions
- GOST 27964-1988 Measurement of surface roughness parameters. Terms and definitions
- GOST 15484-1981 Ionizing radiations and their measurements. Terms and definitions
- GOST R ISO 11843-1-2007 Statistical methods. Capability of detection. Part 1. Terms and definitions
- GOST 8.567-1999 State system for ensuring the uniformity of measurements. Time and frequency maesurements. Terms and definitions
- GOST 8.127-1974 Shock-motion parameter measurements. Terms and definitions
YU-JUS, metrology test definition
Korean Agency for Technology and Standards (KATS), metrology test definition
- KS A ISO 7250-1-2011(2021) Basic human body measurements for technological design－Part 1：Body measurement definitions and landmarks
- KS H ISO 9512-2013(2018) Cigarettes－Determination of ventilation－Definitions and measurement principles
- KS C 1232-2018 Smart Metering ─ COSEM object models for Home use - Definitions
- KS C IEC 62475:2020 High-current test techniques — Definitions and requirements for test currents and measuring systems
- KS H ISO 9512:2021 Cigarettes — Determination of ventilation —Definitions and measurement principles
- KS H ISO 9512:2008 Cigarettes-Determination of ventilation-Definitions and measurement principles
- KS H ISO 9512:2013 Cigarettes-Determination of ventilation-Definitions and measurement principles
- KS B 5325-2009 Proving methods for liquid flowmeters
- KS I ISO 17714:2020 Meteorology — Air temperature measurements —Test methods for comparing the performance of thermometer shields/screens and defining important characteristics
- KS G 3705-2007 Jewelry－Ring－sizes－Definition, measurement and designation
- KS C IEC 60692:2009 Nuclear instrumentation-Density gauges utilizing ionizing radiation-Definitions and test methods
- KS C IEC 60692-2009(2019) Nuclear instrumentation－Density gauges utilizing ionizing radiation－Definitions and test methods
- KS A 0002-2013 Vocabulary of metrology and legal metrology
- KS G 3705-2005 Jewelry－Ring－sizes－Definition, measurement and designation
- KS D ISO 8653-2003(2018) Jewellery－Ring-sizes－Definition, measurement and designation
- KS I ISO 17714:2009 Meteorology-Air temperature measurements-Test methods for comparing the performance of thermometer shields/screens and defining important characteristics
- KS I ISO 9169:2009 Air quality-Definition and determination of performance characteristics of an automatic measuring system
- KS I ISO 9169-2014(2019) Air quality — Definition and determination of performance characteristics of an automatic measuring system
- KS I ISO 9169:2014 Air quality — Definition and determination of performance characteristics of an automatic measuring system
- KS B 0163-2013 Vocabulary of industrial process measurement and control
- KS B 0163-1999 Industrialprocess measurement and control-Terms and definitions
- KS C IEC 61034-1:2020 Measurement of smoke density of cables burning under defined conditions — Part 1: Test apparatus
- KS C IEC 60060-1:2019 High-voltage test techniques -Part 1: General definitions and test requirements
International Organization for Standardization (ISO), metrology test definition
- ISO 7250-1:2017 Basic human body measurements for technological design — Part 1: Body measurement definitions and landmarks
- ISO 7250-1:2008 Basic human body measurements for technological design - Part 1: Body measurement definitions and landmarks
- ISO 9512:2019 Cigarettes — Determination of ventilation — Definitions and measurement principles
- ISO 9512:2002 Cigarettes - Determination of ventilation - Definitions and measurement principles
- ISO 9512:1993 Cigarettes; determination of ventilation; definitions and measurement principles
- ISO/TR 27957:2008 Road vehicles - Temperature measurement in anthropomorphic test devices - Definition of the temperature sensor locations
- ISO 8559-1:2017 Size designation of clothes - Part 1: Anthropometric definitions for body measurement
- ISO 8653:2016 Jewellery - Ring-sizes - Definition, measurement and designation
- ISO 8653:1986 Jewellery; Ring-sizes; Definition, measurement and designation
- ISO 17714:2007 Meteorology - Air temperature measurements - Test methods for comparing the performance of thermometer shields/screens and defining important characteristics
- ISO 9169:2006 Air quality - Definition and determination of performance characteristics of an automatic measuring system
- ISO 6318:1985 Measurement of roundness; Terms, definitions and parameters of roundness
- ISO/TS 21002:2021 Road vehicles - Multidimensional measurement and coordinate systems definition
- ISO/TR 27957:2020 Road vehicles — Temperature measurement in anthropomorphic test devices — Definition of the temperature sensor locations
HU-MSZT, metrology test definition
International Telecommunication Union (ITU), metrology test definition
ITU-R - International Telecommunication Union/ITU Radiocommunication Sector, metrology test definition
- REPORT BT.804-1978 DEFINITIONS OF PARAMETERS FOR AUTOMATIC MEASUREMENT OF TELEVISION INSERTION TEST SIGNALS
Indonesia Standards, metrology test definition
- SNI 19-3386-1994 Definition of tennis for fatique testing and the stastical analysis of fatique data
- SNI 07-1346-1989 Magnetic particles, Definition and terminology of test
- SNI 19-4005-1996 Terms and definitions related to electromagnetic testing
- SNI 01-4498-1998 Determination of caragenan content in seaweeds
- SNI 19-3385-1994 Definition of terms related to mechanical test method
- SNI 07-1336-1989 Test method, definition and terminology of electromagnetic particles
- SNI 19-1864-1990 Radiographic testing, Definition and terminology
- SNI IEC 62052-11:2011 “Electricity metering equipment (AC) - General requirements, tests and test conditions - Part 11: Metering equipment”
ES-UNE, metrology test definition
- UNE-EN ISO 7250-1:2017 Basic human body measurements for technological design - Part 1: Body measurement definitions and landmarks (ISO 7250-1:2017) (Endorsed by Asociación Española de Normalización in December of 2017.)
- UNE-EN ISO 8559-1:2021 Size designation of clothes - Part 1: Anthropometric definitions for body measurement (ISO 8559-1:2017)
- UNE-EN 61969-1:2012 Gypsum blocks - Definitions, requirements and test methods
- UNE-EN 61969-3:2012 Gypsum blocks - Definitions, requirements and test methods
- UNE-EN ISO 19036:2020 Microbiology of the food chain - Estimation of measurement uncertainty for quantitative determinations (ISO 19036:2019)
German Institute for Standardization, metrology test definition
- DIN EN ISO 7250-1:2017-12 Basic human body measurements for technological design - Part 1: Body measurement definitions and landmarks (ISO 7250-1:2017); German version EN ISO 7250-1:2017
- DIN 42111-1:1980 Solid state switches; definitions, climatic test categories, measuring methods and testing procedures
- DIN EN 13439:2004 Packaging - Rate of energy recovery - Definition and method of calculation; German version EN 13439:2003
- DIN EN 13439:2004-04 Packaging - Rate of energy recovery - Definition and method of calculation; German version EN 13439:2003
- DIN ISO 17714:2008-06 Meteorology - Air temperature measurements - Test methods for comparing the performance of thermometer shields/screens and defining important characteristics (ISO 17714:2007)
- DIN 43743:1977 Stabilized supply apparatus for measurement; definitions, expression and testing of performance
- DIN 19260:2012-10 pH measurement - General terms and definitions
- DIN 19261:2016-03 pH measurement - Measuring methods with potentiometric cells - Terms and definitions
- DIN 53290:1982-02 Testing of sandwiches; definitions of terms
- DIN 43751-2:1987-05 Measurement and control; digital measuring instruments; instruments for measuring analogue quantities; definitions, tests and data sheet details
- DIN 19261:2016 pH measurement - Measuring methods with potentiometric cells - Terms and definitions
- DIN 19261:2005 pH measurement - Measuring methods with potentiometric cells - Terms and definitions
- DIN 6802-1:1991-11 Neutron dosimetry; special terms and definitions
- DIN 19260:2012 pH measurement - General terms and definitions
- DIN 19260:2005 pH measurement - General terms and definitions
- DIN IEC 61336:1999 Nuclear instrumentation - Thickness measurement systems utilizing ionizing radiation - Definitions and test methods (IEC 61336:1996)
- DIN 43751-3:1987-05 Measurement and control; digital measuring instruments; instruments for measuring digital quantities; definitions, tests and data sheet details
- DIN 58345:2007 Refrigerators for drugs - Definitions, requirements, testing
- DIN 43751-4:1990 Measurement and control; digital measuring instruments; instruments for measuring time reference quantities; definitions, tests and data sheet details
- DIN 4713-1:1980-12 Heating costs based on consumption; generalities, definitions
- DIN 96298-1:2016-10 Medical instruments - Terms, measuring methods and tests - Part 1: Terms and definitions
- DIN 18716:2017-06 Photogrammetry and remote sensing - Terms and definitions
- DIN 43751-4:1990-06 Measurement and control; digital measuring instruments; instruments for measuring time reference quantities; definitions, tests and data sheet details / Note: Applies in conjunction with DIN 43751-1 (1987-05).
- DIN ISO 12308:2019-11 Plain bearings - Quality assurance of sample types - Definitions, applications and testing (ISO 12308:2017)
- DIN SPEC 91444:2021 Definition of a quantum computer resistant encryption scheme; Text in English
- DIN EN ISO 8559-1:2021-04 Size designation of clothes - Part 1: Anthropometric definitions for body measurement (ISO 8559-1:2017); German version EN ISO 8559-1:2020
- DIN 53815:1989-05 Testing of textiles; definitions for the simple tensile test
- DIN 8314-1:1990 Parking control equipment; parking meters; classification, definitions, requirements
- DIN 18716:2012 Photogrammetry and remote sensing - Terms and definitions
- DIN 18716:2017 Photogrammetry and remote sensing - Terms and definitions
- DIN ISO 17714:2008 Meteorology - Air temperature measurements - Test methods for comparing the performance of thermometer shields/screens and defining important characteristics (ISO 17714:2007);English version of DIN ISO 17714:2008-06
- DIN 41450-2:1987 Potentiometers; single turn rotary potentiometers, low power; terms and definitions, characteristics, methods of test
- DIN 8942:1995-01 Refrigerating unit system - Definitions, testing, marking
- DIN EN 520:2009-12 Gypsum plasterboards - Definitions, requirements and test methods; German version EN 520:2004+A1:2009
- DIN EN 12859:2011-05 Gypsum blocks - Definitions, requirements and test methods; German version EN 12859:2011
- DIN 53014-1:1994-02 Viscosimetry; capillary viscometers with circular and rectangular cross section for determination of flow curves; principles, concepts, definitions / Note: To be replaced by DIN 53014-1 (2019-03).
- DIN EN ISO 9169:2006 Air quality - Definition and determination of performance characteristics of an automatic measuring system (ISO 9169:2006); English version of DIN EN ISO 9169:2006-09
- DIN EN ISO 9169:2006-09 Air quality - Definition and determination of performance characteristics of an automatic measuring system (ISO 9169:2006); German version EN ISO 9169:2006
- DIN VDE 0848-1:2000 Safety in electrical, magnetic and electromagnetic fields - Part 1: Definitions, methods for measurement and calculation
- DIN 43751-1:1987-05 Measurement and control; digital measuring instruments; general specifications relating to definitions, tests and data sheet details
- DIN 19246:1991 Measurement and control; procedure of project; terms and definition
- DIN 96298-1:2016 Medical instruments - Terms, measuring methods and tests - Part 1: Terms and definitions
- DIN IEC 61336:1999-05 Nuclear instrumentation - Thickness measurement systems utilizing ionizing radiation - Definitions and test methods (IEC 61336:1996)
- DIN 8310:1984-12 Water resistance of watches; definition, requirements, testing / Note: To be replaced by DIN 8310 (2010-09).
- DIN 8309:1981-02 Antimagnetic properties of watches; definition, requirements, testing
- DIN 19242-4:1987-01 Measurement and control; performance tests on process computer systems; time measurement; function tested: sine calculation
- DIN 53483-1:1969-07 Testing of Insulating Materials; Determination of Dielectric Properties; Definitions, General Information
- DIN ISO 12308:2019 Plain bearings - Quality assurance of sample types - Definitions, applications and testing (ISO 12308:2017)
- DIN EN ISO 19036:2020-05 Microbiology of the food chain - Estimation of measurement uncertainty for quantitative determinations (ISO 19036:2019); German version EN ISO 19036:2019
IEEE - The Institute of Electrical and Electronics Engineers@ Inc., metrology test definition
- IEEE 1641-2012 Signal and Test Definition
- IEEE 1139-2008 Definitions of Physical Quantities for Fundamental Frequency and Time Metrology-Random Instabilities
National Electrical Manufacturers Association（NEMA), metrology test definition
- NEMA C12.24 TR-2011 Definitions for Calculations of VA, VAh, VAR, and VARh for Poly-Phase Electricity Meters
Institute of Electrical and Electronics Engineers (IEEE), metrology test definition
AT-ON, metrology test definition
- ONORM K 2500-1984 Audiometer; definitions, requirements, testing
- ONORM A 8091-1979 Optical danger Signals; Terms and definitions, requirements, testing, designing Instructions
- ONORM S 1500-1980 Testing of textiles; definitions for the simple tensile fest.
- ONORM K 2501-1986 Speech audiometers; definitions requirements, testing
- ONORM S 5001-3-1993 Acoustics - Quantities, units and definitions - Sound measurement and rating quantities
- ONORM A 6675-1981 Types of testing; Basic terms and definitions
- ONORM A 8060-1980 Body dimensions of people; terms and definitions; Measuring procedures, measuring instruments, values
- ONORM K 2030-1983 Refrigerators for blood conservation; definitions, requirements, fest
- ONORM S 7009-1982 Testing of leather; determination of the contents of total nitrogen and of ammonium salts; calculation of hide substance
AENOR, metrology test definition
- UNE-EN 62475:2012 High-current test techniques - Definitions and requirements for test currents and measuring systems
- UNE-EN 13439:2003 Packaging - Rate of energy recovery - Definition and method of calculation
- UNE-ISO 9512:2005 Cigarettes. Determination of ventilation. Definitions and measurement principles.
- UNE 40498:1984 SAMPLING IN TEXTILE TESTS. DEFINITION OF THE STALISTICAL PARAMETERS TO BE CONSIDERED
- UNE 7521:1994 CONDITIONING AND TESTING. STANDARD ATMOSPHERES. DEFINITIONS.
- UNE-EN 28653:1994 JEWELLERY. RING-SIZES. DEFINITION, MEASUREMENT AND DESIGNATION. (ISO 8653:1986).
- UNE-EN ISO 9169:2007 Air quality - Definition and determination of performance characteristics of an automatic measuring system (ISO 9169:2006)
- UNE 67100:2007 Bathroom accesories. Definitions, general characteristics and tests.
- UNE-EN 12859:2012 Gypsum blocks - Definitions, requirements and test methods
- UNE-EN 60060-1:2012 High-voltage test techniques - Part 1: General definitions and test requirements
KR-KS, metrology test definition
- KS C IEC 62475-2020 High-current test techniques — Definitions and requirements for test currents and measuring systems
- KS H ISO 9512-2021 Cigarettes — Determination of ventilation —Definitions and measurement principles
- KS I ISO 17714-2020 Meteorology — Air temperature measurements —Test methods for comparing the performance of thermometer shields/screens and defining important characteristics
- KS C IEC 61034-1-2020 Measurement of smoke density of cables burning under defined conditions — Part 1: Test apparatus
- KS C IEC 60060-1-2019 High-voltage test techniques -Part 1: General definitions and test requirements
Standard Association of Australia （SAA）, metrology test definition
- AS IEC 62475:2019 High-current test techniques — Definitions and requirements for test currents and measuring systems
- AS 1141.1:1996 Methods for sampling and testing aggregates - Definitions
- AS 2354:1991 Open top metal cans - Definitions, and determination methods for dimensions and capacities
- AS 2512.1:1984 Methods of testing protective helmets - Definitions and headforms
- AS IEC 60060.1:2018 High-voltage test techniques, Part 1: General definitions and test requirements
NL-NEN, metrology test definition
- NEN 3114-1990 Accuracy of measurements Terms and definitions
- NEN 10 902-1992 Industrial-process measurement and control - Terms and definitions
Association of German Mechanical Engineers, metrology test definition
European Committee for Standardization (CEN), metrology test definition
- EN 13439:2003 Packaging - Rate of energy recovery - Definition and method of calculation
- EN ISO 7250-1:2017 Basic human body measurements for technological design - Part 1: Body measurement definitions and landmarks
- HD 396 S1-1979 Definitions of test method terms for semiconductor radiation detectors and scintillation counting
- EN ISO 8559-1:2020 Size designation of clothes - Part 1: Anthropometric definitions for body measurement (ISO 8559-1:2017)
- HD 435 S1-1983 Density meters utilizing ionizing radiation; definitions and test methods
- EN ISO 7250-1:2010 Basic human body measurements for technological design - Part 1: Body measurement definitions and landmarks (ISO 7250-1:2008)
Lithuanian Standards Office , metrology test definition
- LST EN 13439-2004 Packaging - Rate of energy recovery - Definition and method of calculation
- LST EN ISO 7250-1:2010 Basic human body measurements for technological design - Part 1: Body measurement definitions and landmarks (ISO 7250-1:2008)
- LST EN 62475-2011 High-current test techniques - Definitions and requirements for test currents and measuring systems (IEC 62475:2010)
- LST EN ISO 9169:2007 Air quality - Definition and determination of performance characteristics of an automatic measuring system (ISO 9169:2006)
- LST EN 12859-2011 Gypsum blocks - Definitions, requirements and test methods
VN-TCVN, metrology test definition
- TCVN 6673-2008 Cigarettes.Determination of ventilation.Definitions and measurement principles
- TCVN 5137-2009 Time and frequency measurements.Terms and definitions
- TCVN 5544-1991 Jeweller.Ring sizes.Definition, measurement and designation
- TCVN 6751-2009 Air quality.Definition and determination of performance characteristics of an automatic measuring system
Professional Standard - Tobacco, metrology test definition
- YC/T 158-2002 Cigarettes----Determination of ventilation----Definitions and measurement principles
ZA-SANS, metrology test definition
CH-SNV, metrology test definition
ES-AENOR, metrology test definition
National Metrological Verification Regulations of the People's Republic of China, metrology test definition
- JJG 1265-2010 Biometric related terms and definitions technical specification
PL-PKN, metrology test definition
- PN M70053-1974 Non-destructive testing Leak testing Terms and definitions
- PN T06500-02-1985 Electronic measuring instruments Terms and definitions
- PN B02365-1970 Surface area of buildings. Classification, definitions and methods of measurement
- PN E04060-1992 High-voltage test techniques. General definitions and test requirements
- PN B02850-1964 Fire tests on building materials and structures Definitions
- PN A74855-04-1987 Sugar Test methods Determinution of moisturc content and dry substance by calculation
International Commission on Illumination (CIE), metrology test definition
(U.S.) Joint Electron Device Engineering Council Soild State Technology Association, metrology test definition
European Committee for Electrotechnical Standardization（CENELEC）, metrology test definition
- HD 435-1983 Density Meters Utilizing Ionizing Radiation Definitions and Test Methods
- EN 62475:2010 High-current test techniques - Definitions and requirements for test currents and measuring systems
- HD 396-1979 Definitions of Test Method Terms for Semiconductor Radiation Detectors and Scintillation Counting
Taiwan Provincial Standard of the People's Republic of China, metrology test definition
International Electrotechnical Commission (IEC), metrology test definition
- IEC 60678:1980 Definitions of CAMAC terms used in IEC publications
- IEC 62475:2010 High-current test techniques - Definitions and requirements for test currents and measuring systems
- IEC 60596:1978 Definitions of test method terms for semiconductor radiation detectors and scintillation counting
- IEC 60692:1980 Density meters utilizing ionizing radiation. Definitions and test methods
- IEC TR 60902:1987 Industrial-process measurement and control - Terms and definitions.
国家市场监督管理总局、中国国家标准化管理委员会, metrology test definition
- GB/T 39333-2020 Plain bearings—Quality assurance of sample types—Definitions, applications and testing
- GB/T 11888-2021 Jewellery—Ring-size—Definition, measurement and designation
American Society for Testing and Materials (ASTM), metrology test definition
Professional Standard - Military and Civilian Products, metrology test definition
- WJ 2281-1995 Verification rules for flowmeters for testing chemical defense equipment
American National Standards Institute （ANSI), metrology test definition
- ANSI/HI 7.1-7.5-2013 Controlled Volume Metering Pumps for Nomenclature, Definitions, Application, and Operation
- ANSI/IEEE 1139:2008 Standard Definitions of Physical Quantities for Fundamental Frequency and Time Metrology - Random Instabilities
- ANSI N13.39-2001 Design of Internal Dosimetry Programs
Group Standards of the People's Republic of China, metrology test definition
- T/BEA 43000-2017 The Definition and Measurement of Dc Power Supply Output Impedance
- T/GAC 5-2019 Jewelry-Bracelet-size of definition, measurement designation
FI-SFS, metrology test definition
CN-STDBOOK, metrology test definition
ECIA - Electronic Components Industry Association, metrology test definition
- 349-1968 Varistor Definitions and Test Methods
- 275-A-1971 Thermistor Definitions and Test Methods
NO-SN, metrology test definition
- NS 3900-1994 Fire testing. Vocabulary. Terms and definitions
- NS 4486-1983 Conditioning and testing - Standard atmospheres - Definitions
Professional Standard - Post and Telecommunication, metrology test definition
KP-CSK, metrology test definition
- KPS 10882-2002 Size designation of clothes-Definitions and body measurement procedure
Malaysia Standards, metrology test definition
TR-TSE, metrology test definition
- TS 697-1969 HARDWOOD LUMBER Terms, definitions and methods of measurement)
- TS 1891-1975 WOOD PACKAGES TERMS, DEFINITIONS AND METHODS OF MEASUREMENT
- TS 3008-1978 HIGH - VOLTAGE TEST TECHNIQUES PART 1 - GENERAL DEFINITIONS AND TEST REQUIREMENTS
BELST, metrology test definition
- STB 1142-99 Fооtwear. Methods of linear measurements definition
- STB 8017-2004 System for ensuring the uniformity of measurements of the Republic of Belarus. Statistical estimation of metrological specification of standards and adaptive definition them calibration interval. Basic rules
Shandong Provincial Standard of the People's Republic of China, metrology test definition
未注明发布机构, metrology test definition
US-HI, metrology test definition
- HI 7.1-7.5-2006 Controlled-Volume Metering Pumps for Nomenclature, Definitions, Application, and Operation
- HI 7.1-7.5-2013 Controlled-Volume Metering Pumps for Nomenclature, Definitions, Application, and Operation
Guangdong Provincial Standard of the People's Republic of China, metrology test definition
- DB4401/T 175-2022 On-line test method for metering characteristics of water intake metering system
Japanese Industrial Standards Committee (JISC), metrology test definition
RO-ASRO, metrology test definition
- STAS 11071/2-1978 Legal metrology BLOCK DIAGRAM OF HIERARCHY F MEASURING INSTRUMENTS FOR FLUID VOLUMES
- STAS 11071/5-1978 Legal metrology BLOCK DIAGRAM OF HIERARCHY OF MEASURING INSTRUMENTS FOR MASS
- STAS R 12091-1982 MEASUREMENT OF FLUID FLOW Estimation of uncertainty af a flow-rate measurement
IN-BIS, metrology test definition
GM Daewoo, metrology test definition
工业和信息化部, metrology test definition
- YD/T 3842-2021 Software-defined packet transport network testing method
- YD/T 4014-2022 Software-Defined Optical Transport Network (SDOTN) Test Method
BE-NBN, metrology test definition