ZH
RU
ES
Bending Strength Breaking Strength
Bending Strength Breaking Strength, Total:500 items.
In the international standard classification, Bending Strength Breaking Strength involves: Paper and board, Medical equipment, Glass, Fishing and fish breeding, Construction materials, Products of the textile industry, Earthworks. Excavations. Foundation construction. Underground works, Refractories, Footwear, Wood, sawlogs and sawn timber, Vibrations, shock and vibration measurements, Adhesives, Wood-based panels, Semi-manufactures of timber, Ceramics, Rubber, Mining and quarrying, Road vehicle systems, Reinforced plastics, Materials for aerospace construction, Headgear. Clothing accessories. Fastening of clothing, Aerospace fluid systems and components, Gears, Leather technology, Powder metallurgy, Insulating materials, Protection of and in buildings, Solar energy engineering, Measurement of force, weight and pressure, Plastics, Testing of metals, Textile fibres, Kitchen equipment, Farming and forestry, Mechanical testing, Non-textile floor coverings, Piezoelectric and dielectric devices, Structures of buildings, Non-ferrous metals, Materials for the reinforcement of composites, Elements of buildings, Inorganic chemicals, Cellular materials, Rubber and plastics products, Analytical chemistry.
Association Francaise de Normalisation, Bending Strength Breaking Strength
- NF EN ISO 10545-4:2019 Carreaux et dalles céramiques - Partie 4 : détermination de la résistance à la flexion et de la force de rupture
- NF EN ISO 1805:2007 Filets de pêche - Détermination de la force de rupture et de la force de rupture au noeud des fils pour filets
- NF EN 310:1993 Panneaux à base de bois - Détermination du module d'élasticité en flexion et de la résistance à la flexion
- NF EN ISO 3327:2009 Métaux-durs - Détermination de la résistance à la flexion
- NF X41-050:2003 Self adhesive tapes - Measurement of breaking strength and elongation at break.
- NF B51-124*NF EN 310:1993 Wood-based panels. Determination of modulus of elasticity in bending and of bending strength.
- NF EN ISO 5402-2:2018 Cuir - Détermination de la résistance à la flexion - Partie 2 : méthode de flexion d'empeigne
- NF EN ISO 29864:2019 Rubans auto-adhésifs - Mesurage de la résistance à la rupture et de l'allongement à la rupture
- NF EN ISO 17707:2005 Chaussures - Méthodes d'essai applicables aux semelles d'usure - Résistance à la flexion
- NF P61-534-4*NF EN ISO 10545-4:2019 Ceramic tiles - Part 4 : determination of modulus of rupture and breaking strength
- NF A95-423:1993 Hardmetals. Determination of transverse rupture strength.
- NF EN ISO 5402-1:2022 Cuir - Détermination de la résistance à la flexion - Partie 1 : méthode au flexomètre
- NF B10-602-2*NF EN 14617-2:2016 Agglomerated stone - Test methods - Part 2 : determination of flexural strength (bending)
- NF A95-423*NF EN ISO 3327:2009 Hardmetals - Determination of transverse rupture strength
- NF EN ISO 5079:2020 Fibres textiles - Détermination de la force de rupture et de l'allongement de rupture des fibres individuelles
- NF B51-008:2017 Wood - Static bending - Determination of ultimate strength in static bending using small clear specimens
- NF P61-354-4:2012 Ceramic tiles - Part 4 : determination of modulus of rupture and breaking strength.
- NF P61-534-4:2014 Ceramic tiles - Part 4 : determination of modulus of rupture and breaking strength
- NF P61-537:1997 Ceramic tiles. Part 4 : determination of modulus of rupture and breaking strength.
- NF P33-402-2*NF EN 17468-2:2022 Fibre-cement products - Determination of pull through and shear resistance and bending strength calculations - Part 2 : profiled sheets
- NF G62-006:1983 FOOTWEAR. RUBBER AND PLASTIC SOLINGS. DETERMINATION OF THE BREAKING STRENGTH AND OF THE ELONGATION AT BREAK.
- NF P19-105*NF EN 1351:1997 Determination of flexural strength of autoclaved aerated concrete.
- NF EN ISO 17694:2016 Chaussures - Méthodes d'essai pour les tiges et les doublures - Résistance à la flexion
- NF EN 12384:1999 Cuivre et alliages de cuivre - Détermination de la limite élastique en flexion de bande.
- NF P19-829-4*NF EN 1170-4:1998 "Precast concrete products. Test method for glass-fibre reinforced cement. Part 4 : measuring bending strength, ""Simplified bending test"" method."
- NF ISO 2493-2:2020 Papier et carton - Détermination de la résistance à la flexion - Partie 2 : rigidimètre Taber
- NF EN 14651+A1:2007 Méthode d'essai du béton de fibres métalliques - Mesurage de la résistance à la traction par flexion (limite de proportionnalité (LOP), résistance résiduelle)
- NF EN 14651/IN1:2007 Méthode d'essai du béton de fibres métalliques - Mesurage de la résistance à la traction par flexion (limite de proportionnalité (LOP), résistance résiduelle)
- NF EN ISO 17706:2018 Chaussures - Méthodes d'essai des tiges - Résistance à la rupture et allongement
- NF P18-430-5:2012 Testing hardened concrete - Part 5 : flexural strength of test specimens.
- NF P12-702-2*NF EN 1052-2:2016 Methods of test for masonry - Part 2 : determination of flexural strength
- NF ISO 4606:1996 Verre textile - Tissus - Détermination de la force de rupture en traction et de l'allongement à la rupture par la méthode de la bande.
- NF G52-030:2009 Leather - Physical and mechanical tests - Determination of flex resistance by the vamp flex method.
- NF G62-104:2002 Footwear - Test methods for uppers - Tensile strength and elongation.
Korean Agency for Technology and Standards (KATS), Bending Strength Breaking Strength
- KS L 1591-1994 Testing method for flexural strength(modulus of rupture) of high performance ceramics
- KS B ISO 11984:2014 Ophthalmic optics — Contact lenses — Determination of rigid lens flexure and breakage
- KS B ISO 11984:2005 Ophthalmic optics-Contact lenses-Determination of rigid lens flexure and breakage
- KS F 2413-1995 Testing method for compressive strength of concrete using portions of beams broken in flexure
- KS F 2413-2015 Method of test for compressive strength of concrete using portions of beams broken in flexure
- KS F 2483-2014 Method of test for compressive strength of polyester resin concrete using portions of beams broken in flexure
- KS F 2566-2014 Standard test method for flexural performance of fiber reinforced concrete
- KS F 2566-2000 Test method for flexural toughness of steel fiber reinforced concrete
- KS M ISO 29864:2014 Self adhesive tapes — Measurement of breaking strength and elongation at break
- KS M ISO 29864-2014(2019) Self adhesive tapes — Measurement of breaking strength and elongation at break
- KS L 1591-2013 Fine ceramics(advanced ceramics, advanced technical ceramics) — Test method for flexural strength of monolithic ceramics at room temperature
- KS L 1591-2008 Fine ceramics(advanced ceramics, advanced technical ceramics)-Test method for flexural strength of monolithic ceramics at room temperature
- KS F 2413-2020 Standard test method for compressive strength of concrete after flexural strength test
- KS P ISO 9585:2010 Implants for surgery－Determination of bending strength and stiffness of bone plates
- KS P ISO 9585-2010(2016) Implants for surgery－Determination of bending strength and stiffness of bone plates
- KS P ISO 9585:2021 Implants for surgery — Determination of bending strength and stiffness of bone plates
- KS D ISO 3327:2011 Hardmetals-Determination of transverse rupture strength
- KS B 0818-2012 Hardmetals－Determination of transverse rupture strength
- KS B 0818-2001(2011) Hardmetals－Determination of transverse rupture strength
- KS M ISO 15107-2007(2022) Adhesives－Determination of cleavage strength of bonded joints
- KS K 0743-2016 Test method for breaking strength and elongation of geotextiles：Grab method
- KS K ISO 3060:2019 Textiles — Cotton fibres — Determination of breaking tenacity of flat bundles
- KS K 0410-2022 Test method for breaking strength and elongation of cords
- KS K 0520-1995 Testing method for breaking strength and elingation of woven cloth
- KS M ISO 1209-2-2012(2022) Rigid cellular plastics－Determination of flexural properties－Part 2：Determination of flexural strength and apparent flexural modulus of elasticity
- KS M ISO 22288:2008 Leather-Physical and mechanical tests-Determination of flex resistance by the vamp flex method
- KS K ISO 6939:2019 Textiles — Yarns from packages — Method of test for breaking strength of yarn by the skein method
- KS K ISO 6939:2014 Textiles — Yarns from packages — Method of test for breaking strength of yarn by the skein method
CZ-CSN, Bending Strength Breaking Strength
RO-ASRO, Bending Strength Breaking Strength
- STAS 11175-1978 Refractory mortars with chemical bindings DETERMINATION OF FRACTURE STRENGTH AT JOINT BENDING
- STAS 9966-1974 HARDBOARD Determination of static bending slrength
- STAS SR EN 310-1996 Wood-based panels. Determination of modulus of elasticity in bending and of bending strength
- STAS 337/1-1988 WOOD Delermination of ultimatc strcngh in static bending
- STAS 4740-1989 Board and paperboard BENDING RESISTANCE DETERMI- NATION OF LOAD AND BENDING ANGLE
- STAS 9760-1984 TESTINGS OF METALS Determination of breaking tenacity under plane breaking strain conditions K10 METHOD
- STAS 10537-1976 CARBON MATERIALS Determination of (he strength to compression, bending and traction
- STAS 12824-1990 SHAPED REFRACTORY PRODUCTS Strength determination at thermal shock-bending
- STAS 8265-1979 Sintered metal powder products EST OF THE TRANSVERSE RUPTURE STRENGTH
- STAS 6084-1985 FINISHED LEATHERS Strength determination at repeated flexion of leather and coating
RU-GOST R, Bending Strength Breaking Strength
- GOST ISO 5626-1997 Paper. Determination of folding endurance (Shopper, Lomarge, Kellers-Molena, MIT methods)
- GOST 23775-1979 Carbon products. Methods of determination for compressive, bend, tensile, strengths (diametral compression)
- GOST 19921-1974 Glued and bent blanks. Method of determining ultimate strength in static bending
- GOST 21153.6-1975 Rocks. Method for the determination of bend strength limit
- GOST R 50203.4-1992 Smallwares. Method for determination of the breaking strength and breaking elongation
- GOST 255-1990 Ebonite. Determination of cross-breaking strength
- GOST ISO 3378-2014 Leather. Determination of resistance to cracking to grain layer of Flexural and tensile strength of the grain layer
- GOST 16483.3-1984 Wood. Method of static bending strength determination
- GOST ISO 13765-4-2017 Refractory mortars. Determination of flexural bonding strength
- GOST ISO 9585-2011 Implants for surgery. Determination of bending strength and stiffness of bone plates
- GOST 30271-1996 Paper and board. Determination of bending stiffness. Resonance method
- GOST 26406-1984 Porcelain and faience ware. Method for determination of bending resistance
- GOST 17316-1971 Artificial leather. Measuring method of tearing load and elongation of break
- GOST R 53552-2009 Cotton fibre. Method for determination of unit breaking strength
- GOST R ISO 3376-2013 Leather. Determination of the tensile strength at break and elongation
- GOST R 57749-2017 Ceramic composites. Test method of flexural strength at normal temperature
- GOST 26798.2-1996 I-G and I-H well cement. Test methods
- GOST 20019-1974 Sintered hard metals. Determination of cross-bending strength
- GOST 26798.2-1985 Oil-well cements. Test methods of strength limits in bending and compression
- GOST 9550-1981 Plastics. Methods for determination of elasticity modulus at strength, compression and bending
American Society for Testing and Materials (ASTM), Bending Strength Breaking Strength
- ASTM C158-95 Standard Test Methods for Strength of Glass by Flexure (Determination of Modulus of Rupture)
- ASTM C158-95(2000) Standard Test Methods for Strength of Glass by Flexure (Determination of Modulus of Rupture)
- ASTM C158-02 Standard Test Methods for Strength of Glass by Flexure (Determination of Modulus of Rupture)
- ASTM F417-78(1996) Test Method for Flexural Strength (Modulus of Rupture) of Electronic-Grade Ceramics (Withdrawn 2001)
- ASTM F394-78(1996) Test Method for Biaxial Flexure Strength (Modulus of Rupture) of Ceramic Substrates (Withdrawn 2001)
- ASTM C158-02(2012) Standard Test Methods for Strength of Glass by Flexure (Determination of Modulus of Rupture)
- ASTM C158-02(2017) Standard Test Methods for Strength of Glass by Flexure (Determination of Modulus of Rupture)
- ASTM D7914/D7914M-21 Standard Test Method for Strength of Fiber Reinforced Polymer (FRP) Bent Bars in Bend Locations
- ASTM C648-20 Standard Test Method for Breaking Strength of Ceramic Tile
- ASTM C1684-18(2023) Standard Test Method for Flexural Strength of Advanced Ceramics at Ambient Temperature—Cylindrical Rod Strength
- ASTM D1578-93(2006)e1 Standard Test Method for Breaking Strength of Yarn in Skein Form
- ASTM C880/C880M-18e1 Standard Test Method for Flexural Strength of Dimension Stone
- ASTM D1634-00(2006) Standard Test Method for Compressive Strength of Soil-Cement Using Portions of Beams Broken in Flexure (Modified Cube Method)
- ASTM D1634-00 Standard Test Method for Compressive Strength of Soil-Cement Using Portions of Beams Broken in Flexure (Modified Cube Method)
- ASTM D1634-17 Standard Test Method for Compressive Strength of Soil-Cement Using Portions of Beams Broken in Flexure (Modified Cube Method)
- ASTM D7914/D7914M-14 Standard Test Method for Strength of Fiber Reinforced Polymer (FRP) Bent Bars in Bend Locations
- ASTM E812-91(1997) Standard Test Method for Crack Strength of Slow-Bend Precracked Charpy Specimens of High-Strength Metallic Materials (Withdrawn 2005)
- ASTM C648-98 Standard Test Method for Breaking Strength of Ceramic Tile
- ASTM C880-98 Standard Test Method for Flexural Strength of Dimension Stone
- ASTM C880-06 Standard Test Method for Flexural Strength of Dimension Stone
- ASTM C880/C880M-09 Standard Test Method for Flexural Strength of Dimension Stone
- ASTM C880/C880M-18 Standard Test Method for Flexural Strength of Dimension Stone
- ASTM C880/C880M-15 Standard Test Method for Flexural Strength of Dimension Stone
- ASTM D3759/D3759M-05(2011) Standard Test Method for Breaking Strength and Elongation of Pressure-Sensitive Tape
- ASTM C1161-02a Standard Test Method for Flexural Strength of Advanced Ceramics at Ambient Temperature
- ASTM C1161-02c Standard Test Method for Flexural Strength of Advanced Ceramics at Ambient Temperature
- ASTM C1161-02b Standard Test Method for Flexural Strength of Advanced Ceramics at Ambient Temperature
- ASTM C1161-18 Standard Test Method for Flexural Strength of Advanced Ceramics at Ambient Temperature
- ASTM F3503-21 Standard Test Method for Breaking Strength of Slalom Water Skis
- ASTM E518-03 Standard Test Methods for Flexural Bond Strength of Masonry
- ASTM D1184-98(2020) Standard Test Method for Flexural Strength of Adhesive Bonded Laminated Assemblies
- ASTM D1294-95a(2001) Standard Test Method for Tensile Strength and Breaking Tenacity of Wool Fiber Bundles 1-in. (25.4-mm) Gage Length
- ASTM D1294-95a Standard Test Method for Tensile Strength and Breaking Tenacity of Wool Fiber Bundles 1-in. (25.4-mm) Gage Length
- ASTM D1294-05(2013) Standard Test Method for Tensile Strength and Breaking Tenacity of Wool Fiber Bundles 1-in. (25.4-mm) Gage Length (Withdrawn 2022)
- ASTM C1018-97 Standard Test Method for Flexural Toughness and First-Crack Strength of Fiber-Reinforced Concrete (Using Beam With Third-Point Loading) (Withdrawn 2006)
- ASTM C1899-21 Standard Test Method for Flexural Strength of Continuous Fiber-Reinforced Advanced Ceramic Tubular Test Specimens at Ambient Temperature
- ASTM B406-96(2000) Standard Test Method for Transverse Rupture Strength of Cemented Carbides
- ASTM D1578-93 Standard Test Method for Breaking Strength of Yarn in Skein Form
- ASTM D1578-93(2000) Standard Test Method for Breaking Strength of Yarn in Skein Form
- ASTM B406-96(2005) Standard Test Method for Transverse Rupture Strength of Cemented Carbides
- ASTM B406-96 Standard Test Method for Transverse Rupture Strength of Cemented Carbides
- ASTM D1578-93(2022) Standard Test Method for Breaking Strength of Yarn in Skein Form
- ASTM B406-96(2021) Standard Test Method for Transverse Rupture Strength of Cemented Carbides
- ASTM B406-96(2015) Standard Test Method for Transverse Rupture Strength of Cemented Carbides
- ASTM D1294-05 Standard Test Method for Tensile Strength and Breaking Tenacity of Wool Fiber Bundles 1-in. (25.4-mm) Gage Length
- ASTM E518-02 Standard Test Methods for Flexural Bond Strength of Masonry
European Committee for Standardization (CEN), Bending Strength Breaking Strength
- EN ISO 11984:1999 Ophthalmic Optics - Contact Lenses - Determination of Rigid Lens Flexure and Breakage ISO 11984: 1999
- EN ISO 1805:2006 Fishing nets - Determination of breaking force and knot breaking force of netting yarns
- EN 310:1993 Wood-based panels; determination of modulus of elasticity in bending and of bending strength
- prEN 310-1992 Wood-based panels; determination of modulus elasticity, in bending and bending strength
- EN 14410:2003 Self adhesive tapes - Measurement of breaking strength and elongation at break
- prEN 23327-1992 Hardmetals; determination of transverse rupture strength (ISO 3327:1982)
- EN 1351:1997 Determination of flexural strength of autoclaved aerated concrete
- EN 1533:2010 Wood flooring - Determination of bending strength under static load - Test methods
- EN 13335:2002 Leather - Physical and Mechanical Tests - Determination of Flex Resistance by the Vamp Flex Method
- EN 17468-1:2022 Fibre cement products - Determination of pull through and shear resistance and bending strength calculations - Part 1: Flat sheets
- FprEN 17468-2-2021 Fibre-cement products - Determination of pull through and shear resistance and bending strength calculations - Part 2: Profiled sheets
- EN 23327:1993 Hardmetals - Determination of Transverse Rupture Strength (ISO 3327: 1982)
- prEN 23995-1992 Metallic powders; determination of green strength by transverse rupture of rectangular compacts (ISO 3995:1985)
- EN 538:1994 Clay roofing tiles for discontinuous laying - Flexural strength test
International Organization for Standardization (ISO), Bending Strength Breaking Strength
- ISO 11984:1999 Ophthalmic optics - Contact lenses - Determination of rigid lens flexure and breakage
- ISO 29864:2007 Self adhesive tapes - Measurement of breaking strength and elongation at break
- ISO 29864:2018 Self adhesive tapes - Measurement of breaking strength and elongation at break
- ISO 3348:1975 Wood; Determination of impact bending strength
- ISO 10545-4:2019 Ceramic tiles — Part 4: Determination of modulus of rupture and breaking strength
- ISO 9585:1990 Implants for surgery; determination of bending strength and stiffness of bone plates
- ISO 2473:1972 Ebonite — Determination of cross-breaking strength
- ISO 3327:1975 Title missing - Legacy paper document
- ISO 3327:2009 Hardmetals - Determination of transverse rupture strength
- ISO 3327:1982 Hardmetals; Determination of transverse rupture strength
- ISO 1421:1977 Fabrics coated with rubber or plastics; Determination of breaking strength and elongation at break
- ISO 5402-2:2015 Leather - Determination of flex resistance - Part 2: Vamp flex method
- ISO 10545-4:2004 Ceramic tiles - Part 4: Determination of modulus of rupture and breaking strength
- ISO 10545-4:2014 Ceramic tiles - Part 4: Determination of modulus of rupture and breaking strength
- ISO 6133:1981 Rubber and plastics; Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength
- ISO 3060:1974 Textiles; Cotton fibres; Determination of breaking tenacity of flat bundles
- ISO 5082:1982 Textiles; Woven fabrics; Determination of breaking strength; Grab method
- ISO 15108:1998 Adhesives - Determination of strength of bonded joints using a bending-shear method
- ISO 4604:2011 Reinforcement fabrics - Determination of conventional flexural stiffness - Fixed-angle flexometer method
- ISO 1209-2:2004 Rigid cellular plastics - Determination of flexural properties - Part 2: Determination of flexural strength and apparent flexural modulus of elasticity
- ISO 22288:2006 Leather - Physical and mechanical tests - Determination of flex resistance by the vamp flex method
- ISO 2472:1975 Ebonite — Determination of tensile strength and elongation at break
German Institute for Standardization, Bending Strength Breaking Strength
- DIN EN ISO 1805:2007 Fishing nets - Determination of breaking force and knot breaking force of netting yarns (ISO 1805:2006); English version of DIN EN ISO 1805:2007-02
- DIN EN 12031:1996 Self adhesive tapes - Measurement of bursting strength; German version EN 12031:1996
- DIN EN 1351:1997 Determination of flexural strength of autoclaved aerated concrete; German version EN 1351:1997
- DIN EN 310:1993 Wood-based panels; determination of modulus of elasticity in bending and of bending strength; German version EN 310:1993
- DIN EN 310:1993-08 Wood-based panels; determination of modulus of elasticity in bending and of bending strength; German version EN 310:1993
- DIN EN 14410:2003-06 Self adhesive tapes - Measurement of breaking strength and elongation at break; German version EN 14410:2003
- DIN EN ISO 29864:2019-09 Self adhesive tapes - Measurement of breaking strength and elongation at break (ISO 29864:2018); German version EN ISO 29864:2019
- DIN EN 14617-2:2016 Agglomerated stone - Test methods - Part 2: Determination of flexural strength (bending)
- DIN 52189-1:1981-12 Testing of wood; Impact bending test; Determination of impact bending strength
- DIN EN ISO 10545-4:2019-06 Ceramic tiles - Part 4: Determination of modulus of rupture and breaking strength (ISO 10545-4:2019); German version EN ISO 10545-4:2019
- DIN 52189-1:1981 Testing of wood; Impact bending test; Determination of impact bending strength
- DIN EN ISO 3327:2009-10 Hardmetals - Determination of transverse rupture strength (ISO 3327:2009); German version EN ISO 3327:2009
- DIN EN ISO 29864:2019 Self adhesive tapes - Measurement of breaking strength and elongation at break (ISO 29864:2018)
- DIN EN ISO 22288:2009 Leather - Physical and mechanical tests - Determination of flex resistance by the vamp flex method (ISO 22288:2006); English version of DIN EN ISO 22288:2009-04
- DIN EN 17468-1:2020 Fibre cement products - Determination of pull through and shear resistance and bending strength calculations - Part 1: Flat sheets; German and English version prEN 17468-1:2020
- DIN EN 17468-1:2022 Fibre cement products - Determination of pull through and shear resistance and bending strength calculations - Part 1: Flat sheets
- DIN 51230:1977 Material Testing Machines; Dynstat Apparatus for the Determination of Bending Strength and Impact Strength of Small Specimens
- DIN 53864:1978 Testing of textiles; determination of the bending strength, method according to Schlenker
- DIN EN 17468-2:2020 Fibre cement products - Determination of pull through and shear resistance and bending strength calculations - Part 2: Profiled sheets; German and English version prEN 17468-2:2020
- DIN EN 17468-2:2022 Fibre-cement products - Determination of pull through and shear resistance and bending strength calculations - Part 2: Profiled sheets
- DIN EN ISO 10545-4:2019 Ceramic tiles - Part 4: Determination of modulus of rupture and breaking strength (ISO 10545-4:2019)
- DIN EN 1052-2:1999 Methods of test for masonry - Part 2: Determination of flexural strength; German version EN 1052-2:1999
- DIN EN 14617-2:2016-09 Agglomerated stone - Test methods - Part 2: Determination of flexural strength (bending); German version EN 14617-2:2016
- DIN 18555-3:1982 Testing of mortars containing mineral binders; hardened mortars; determination of flexural strength, compressive strength and bulk density
- DIN 51902:1997 Testing of carbon materials - Determination of flexural strength by three point method - Solid matters
- DIN EN 538:1994-11 Clay roofing tiles for discontinuous laying - Flexural strength test; German version EN 538:1994
British Standards Institution (BSI), Bending Strength Breaking Strength
- BS EN ISO 1805:2006 Fishing nets - Determination of breaking force and knot breaking force of netting yarns
- BS EN 310:1993 Wood-based panels. Determination of modulus of elasticity in bending and of bending strength
- BS EN 1940:1996 Self adhesive tapes - Measurement of breaking strength
- BS EN 14410:2003 Self adhesive tapes - Measurement of breaking strength and elongation at break
- BS EN ISO 10545-4:2019 Tracked Changes. Ceramic tiles. Determination of modulus of rupture and breaking strength
- BS DD 86-1:1983 Damp-proof courses - Methods of test for flexural bond strength and short term shear strength
- BS ISO 13765-4:2004 Refractory mortars - Determination of flexural bonding strength
- BS EN 12390-5:2000 Testing hardened concrete - Flexural strength of test specimens
- BS EN 1533:2010 Wood flooring. Determination of bending strength under static load. Test methods
- BS EN 14617-2:2016 Tracked Changes. Agglomerated stone. Test methods. Determination of flexural strength (bending)
- BS EN 1351:1997 Determination of flexural strength of autoclaved aerated concrete
- BS 1881-119:1983 Testing concrete - Method for determination of compressive strength using portions of beams broken in flexure (equivalent cube method)
- BS 1881-119:2011 Testing concrete. Method for determination of compressive strength using portions of beams broken in flexure (equivalent cube method)
- BS EN 12808-3:2008 Grouts for tiles - Determination of flexural and compressive strength
- BS EN ISO 3327:2009 Hardmetals - Determination of transverse rupture strength(ISO 3327:2009)
- BS EN 14617-2:2004 Agglomerated stone-Test methods-Part 2:Determination of flexural strength(bending)
- BS EN 538:1994 Clay roofing tiles for discontinuous laying - Flexural strength test
- BS EN ISO 22288:2009 Leather - Physical and mechanical tests - Determination of flex resistance by the vamp flex method
- BS ISO 4604:2011 Reinforcement fabrics. Determination of conventional flexural stiffness. Fixed-angle flexometer method
- BS EN 17468-1:2022 Fibre cement products. Determination of pull through and shear resistance and bending strength calculations - Flat sheets
- BS EN 17468-2:2022 Fibre-cement products. Determination of pull through and shear resistance and bending strength calculations - Profiled sheets
- BS EN 13522:2002 Footwear - Test methods for uppers - Tensile strength and elongation
ZA-SANS, Bending Strength Breaking Strength
- SANS 1093:2006 Breaking strength and elongation at break (strip method)
- SANS 5323:2008 Breaking strength of seams in textiles
- SANS 5323:2005 Breaking strength of seams in textiles
- SANS 1095:1973 Breaking strength of textile fabrics: grab method
- SANS 5237:2005 Chlorine retention of fabrics: reduction in breaking strength method
- SANS 1092:2007 Breaking strength and extension at break of textile fabrics - Strip method using constant rate of load
- SANS 5864:2006 Concrete tests - Flexural strength of hardened concrete
- SANS 468:2007 Breaking strength and extension at break of textile fabrics: narrow strip method using constant rate of traverse
- SANS 5414:2007 Tensile strength and extension at break: modified (dumb-bell) strip method
- SANS 16133:2003 Rubber and plastics - Analysis of multipeak traces obtained in determinations of tear strength and adhesion strength
(U.S.) Ford Automotive Standards, Bending Strength Breaking Strength
TR-TSE, Bending Strength Breaking Strength
- TS 3287-1979 STANDARD METHOD OF TEST FOR COMPRESSIVE STRENGTH OF CONCRETE USING PORTIONS OF BEAMS BROKEN IN FLEXURE
- TS 2808-1977 EBONITE - Determination Of Cross - Breaking Strength
- TS 1619-1974 SEAM BREAKING STRENGTH OF WOVEN TEXTILE FABRICS
- TS 2477-1976 Wood - Determination of Impact Bending Strength
- TS 253-1965 METHOD OF DETERMIN?NG THE WEFT AND WARP BREAKING STRENGTH OF THE CLOTH
- TS 2150-1975 BREAKING STRENGTH AND ELONGATION OF TEXTILE FABRICS : GRAB METHOD
KR-KS, Bending Strength Breaking Strength
- KS F 2326-2022 Test method for compressive strength of soil cement using portions of beam broken in flexure
- KS P ISO 9585-2021 Implants for surgery — Determination of bending strength and stiffness of bone plates
- KS D ISO 3327-2011 Hardmetals－Determination of transverse rupture strength
- KS K ISO 3060-2019 Textiles — Cotton fibres — Determination of breaking tenacity of flat bundles
- KS K ISO 6939-2019 Textiles — Yarns from packages — Method of test for breaking strength of yarn by the skein method
The American Road & Transportation Builders Association, Bending Strength Breaking Strength
- AASHTO T 140-1997(R2009) Standard Method of Test for Compressive Strength of Concrete Using Portions of Beams Broken in Flexure
AASHTO - American Association of State Highway and Transportation Officials, Bending Strength Breaking Strength
- T 140-1997 Standard Method of Test for Compressive Strength of Concrete Using Portions of Beams Broken in Flexure
- DIVISION I 9.17-1996 Flexural Strength (Interim 1997; Interim 1998)
- T140-1997 Standard Specification for Compressive Strength of Concrete Using Portions of Beams Broken in Flexure (Nineteenth Edition; ASTM C116-90)
- T140-1993 Standard Specification for Compressive Strength of Concrete Using Portions of Beams Broken in Flexure (ASTM C116-90) (Eighteenth Edition; ASTM C 116-90)
Indonesia Standards, Bending Strength Breaking Strength
- SNI 12-0565-1989 Bending strength test of shoes
- SNI ISO 16978:2010 Wood-based panels - Determination of modulus elasticity in bending and of bending strength
- SNI 06-4966-1999 Determination of tensile and flexural/compression properties of vulcanized and thermoplastic rubber
- SNI ISO 3133:2010 Wood - Determination of ultimate strength in static bending
SE-SIS, Bending Strength Breaking Strength
Taiwan Provincial Standard of the People's Republic of China, Bending Strength Breaking Strength
- CNS 13976-1997 Method of test for flexural strength of dimensional stone
- CNS 12703-1990 Method of Test for Flexural Strength (Modulus of Rupture) of High Performance Ceramics at Elevated Temperature
- CNS 13382-19-1995 Implants for Surgery-Determination of Bending Strength and Stiffness of Bone Plates
- CNS 13382.19-1995 Implants for Surgery-Determination of Bending Strength and Stiffness of Bone Plates
- CNS 13177-1993 Method of Test for Compressive Strength of Polyester Resin Concrete Using Portions of Beams Broken in Flexure
- CNS 14387-1999 Method of test for bending strength of fine ceramic joint
- CNS 12701-1990 Method of Test for Flexural Strength ( Modulus of Rupture ) of High Performance Ceramics
- CNS 7051-1981 Method of Test for Short - Time Rupture Strength of Plastic Pipe, Tubing and Fittings
AENOR, Bending Strength Breaking Strength
- UNE 83509:2004 CONCRETE WITH FIBERS. FLEXURE STRENGTH
- UNE-EN 310:1994 WOOD-BASED PANELS. DETERMINATION OF MODULUS OF ELASTICITY IN BENDING AND OF BENDING STRENGTH.
- UNE-EN 14410:2003 Self adhesive tapes - Measurement of breaking strength and elongation at break
- UNE 40247-1:1974 IN COTTON FIBRES. DETERMINATION OF BREAKING TENACITY OF FLAT BUNDLES.
- UNE 67037:1999 HOLLOW CLAY BLOCKS FOR FLOORS. FLEXURE STRENGHT TEST.
- UNE-EN ISO 10545-4:2015 Ceramic tiles - Part 4: Determination of modulus of rupture and breaking strength (ISO 10545-4:2014)
- UNE-EN ISO 3327:2010 Hardmetals - Determination of transverse rupture strength (ISO 3327:2009)
- UNE-EN 538:1995 Clay roofing tiles for discontinuous laying - Flexural strength test
- UNE-ISO 1209-2:2011 Rigid cellular plastics. Determination of flexural properties. Part 2: Determination on flexural strength and apparent flexural modulus of elasticity
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Bending Strength Breaking Strength
- GB/T 2833-1996 Test method for cross-bending strength of vitrified pipe
- GB/T 1696-2001 Ebonite-Determination of cross breakiing strength
- GB/T 1965-1996 Test method for cross-bending strength of porous ceramic
- GB/T 6569-1986 Testing method for flexural strength of high performance ceramics
- GB/T 14230-1993 Standard of test methed for bending load capacity of gears
- GB 6569-1986 Testing method for flexural strength of high performance ceramics
- GB/T 6569-2006 Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for flexural strength of monolithic ceramics at room temperature
- GB/T 4741-1999 Standard test method for bending strength of ceramic materials
- GB/T 12833-1991 Rubber and plastics--Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength
- GB/T 5882-1986 Testing method of bundle breaking tenacity of ramie fiber
- GB/T 5886-1986 Testing method of single fiber breaking tenacity of ramie
- GB/T 424-1978 Test methods of wet breaking strength for printed and dyed fabrics
- GB/T 4710-1984 Method of test for breaking tenacity of wool fibre bundles
- GB/T 427-1978 Test methods of stitching strength for printed and dyed fabrics
- GB/T 27629-2011 Determination of breaking tenacity of animal fibre bundles
- GB 5886-1986 Test method for breaking strength of ramie single fiber
- GB 5882-1986 Test method for breaking strength of ramie bundle fibers
- GB/T 14390-1993 Test method for flexural strength of high performance ceramics at elevated temperature
- GB/T 14390-2008 Fine ceramics (advanced ceramics,advanced technical ceramics).Test methos for flexural strength of monolithic ceramics at elevated temperature
- GB/T 12833-2006 Rubber and plastics. Analysis of multipeak traces obtained in determinations of tear strength and adhesion strength
- GB/T 13783-1992 Cotton fibres--Determination of breaking tenacity of flat bundles
- GB/T 423-1978 Test methods of breaking strength and elongation for printed and dyed fabrics
- GB/T 3851-1983 Hardmetals--Determination of transverse rupture strength
- GB/T 3851-2015 Hardmetals.Determination of transverse rupture strength
- GB/T 11387-1989 Testing methods for static flexural strength of piezoelectric ceramics
- GB/T 31967.2-2015 Test method for physical property of rare earth permanent magnetic materials.Part 2:Determination of bending strength and fracture toughness
- GB/T 8812.2-2007 Rigid cellular plastics.Determination of flexural properties.Part 2: Determination of flexural strength and apparent flexural modulus of elasticity
- GB/T 13835.5-2009 Test method for rabbit hair.Part 5:Breaking tenacity and elongation at break of single fibre
- GB/T 10422-2002 Sintered metal friction materials--Determination of transverse ruptue strength
ESDU - Engineering Sciences Data Unit, Bending Strength Breaking Strength
SAE - SAE International, Bending Strength Breaking Strength
- SAE AMS3802C-1969 CLOTH@ AIRPLANE@ COTTON@ MERCERIZED 50 1b Breaking Strength
- SAE AMS3802A-1946 Cloth; Airplane@ Cotton@ Mercerized 50 1bs. Breaking Strength
- SAE AMS3802B-1954 Cloth@ Airplane@ Cotton@ Mercerized 50 1b Breaking Strenght
- SAE AMS3806D-1988 CLOTH@ AIRPLANE@ COTTON@ MERCERIZED 80 1b (355 N) Breaking Strength
- SAE AMS3802D-1984 Cloth@ Airplane@ Cotton@ Mercerized 50 1b (220 N) Breaking Strenght
- SAE AMS3802F-2016 Cloth@ Airplane@ Cotton@ Mercerized 50 Pounds (220 N) Breaking Strength
- SAE AMS3804E-2016 Cloth@ Airplane@ Cotton@ Mercerized 65 Pounds (290 N) Breaking Strength
- SAE AMS3777/8B-1995 TAPE@ NYLON@ NONMELTING@ REINFORCING 2 (50) WIDE@ 2000 (8895 N) BREAKING STRENGTH
- SAE AMS3777/5B-1995 TAPE@ NYLON@ NONMELTING@ REINFORCING 1 (25) WIDE@ (2335 N) BREAKING STRENGTH
- SAE AMS3777/3B-1995 TAPE@ NYLON@ NONMELTING@ REINFORCING 1 (25) WIDE@ 1000 (4450 N) BREAKING STRENGTH
- SAE AMS3777/7B-1995 TAPE@ NYLON@ NONMELTING@ REINFORCING 2 (50) WIDE@ 1500 (6670 N) BREAKING STRENGTH
- SAE AMS3806G-2018 Cloth@ Airplane@ Mercerized Cotton 80 Pounds Force (356 N) Breaking Strength
- SAE AMS3777/2B-1995 TAPE@ NYLON@ NONMELTING@ REINFORCING 9/16 (14) WIDE@ 500 (2225 N) BREAKING STRENGTH
- SAE AMS3777/1B-1995 TAPE@ NYLON@ NONMELTING@ REINFORCING 3/4 (19) WIDE@ 400 (1780 N) BREAKING STRENGTH
- SAE AMS3799/3D-2018 Webbing@ Tubular@ Low Modulus Aramid 1 (25) Wide@ 4000 (17@793) Breaking Strength
- SAE AMS3777/4B-1995 TAPE@ NYLON@ NONMELTING@ REINFORCING 1-1/2 (38) WIDE@ 1500 (6670 N) BREAKING STRENGTH
Danish Standards Foundation, Bending Strength Breaking Strength
- DS/EN 310:1993 Wood-based panels. Determination of modulus of elasticity in bending and of bending strength
- DS/EN 310:1994 Wood-based panels - Determination of modulus of elasticity in bending and bending strength
- DS/EN 14410:2003 Self adhesive tapes - Measurement of breaking strength and elongation at break
- DS/EN 14617-2:2009 Agglomerated stone - Test methods - Part 2: Determination of flexural strength (bending)
- DS/EN ISO 10545-4:2012 Ceramic tiles - Part 4: Determination of modulus of rupture and breaking strength
- DS 1097.9:1982 Floorings. Tensile strength and elongation at rupture
- DS 1103.2:1976 Test methods for rigid flat sheets. Modulus of elasticity in bending and bending strength
- DS/EN 23327:1994 Hardmetals. Determination of transverse rupture strength
- DS/EN ISO 3327:2009 Hardmetals - Determination of transverse rupture strength
- DS/ISO 6133:1981 Rubber and plastics. Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength
- DS/EN 538:1995 Clay roofing tiles for discontinuous laying - Flexural strength test
Lithuanian Standards Office , Bending Strength Breaking Strength
- LST EN 310-1999 Wood-based panels - Determination of modulus of elasticity in bending and of bending strength
- LST EN 14410-2003 Self adhesive tapes - Measurement of breaking strength and elongation at break
- LST EN 14617-2-2008 Agglomerated stone - Test methods - Part 2: Determination of flexural strength (bending)
- LST EN ISO 10545-4:2012 Ceramic tiles - Part 4: Determination of modulus of rupture and breaking strength (ISO 10545-4:2004)
- LST EN ISO 3327:2009 Hardmetals - Determination of transverse rupture strength (ISO 3327:2009)
- LST EN 538-2000 Clay roofing tiles for discontinuous laying - Flexural strength test
国家市场监督管理总局、中国国家标准化管理委员会, Bending Strength Breaking Strength
- GB/T 39826-2021 Fine ceramics—Determining flexural bond strength—Four-point bending method
- GB/T 37781-2019 Test methods for bending strength of glass
- GB/T 14230-2021 Test method of tooth bending strength for gear load capacity
- GB/T 39039-2020 Evaluation method for hydrogen-induced delayed fracture of high strength steels
未注明发布机构, Bending Strength Breaking Strength
- BS EN 310:1993(1999) Wood - based panels — Determination of modulus of elasticity in bending and of bending strength
- BS EN ISO 29864:2019 Self adhesive tapes - Measurement of breaking strength and elongation at break
- BS ISO 29864:2018 Self adhesive tapes — Measurement of breaking strength and elongation at break
- BS EN 538:1994(1999) Clay roofing tiles for discontinuous laying — Flexural strength test
Professional Standard - Chemical Industry, Bending Strength Breaking Strength
Society of Automotive Engineers (SAE), Bending Strength Breaking Strength
- SAE AIR1418A-2013 Flexure Fatigue Strength of Tube Fitting Joints
- SAE AIR1418-2011 FLEXURE FATIGUE STRENGTH OF TUBE FITTING JOINTS
- SAE AIR1418B-2020 Flexure Fatigue Strength of Tube Fitting Joints
- SAE AMS3802E-1993 (Noncurrent)Cloth, Airplane, Cotton, Mercerized 50 Pounds (220 N) Breaking Strength
- SAE AIR1418A-1996 Flexure Fatigue Strength of Tube Fitting Joints
- SAE AMS3804D-1993 (Noncurrent)Cloth, Airplane, Cotton, Mercerized 65 Pounds (290 N) Breaking Strength
- SAE AMS3806-1946 CLOTH; AIRPLANE, COTTON, MERCERIZED 80 lbs. Breaking Strength
- SAE AMS3804-1946 CLOTH; AIRPLANE, COTTON, MERCERIZED 65 lbs. Breaking Strength
- SAE AMS3804A-1954 CLOTH, AIRPLANE, COTTON, MERCERIZED 65 lb Breaking Strength
- SAE AMS3806A-1952 CLOTH, AIRPLANE, COTTON, MERCERIZED 80 lb Breaking Strength
- SAE AMS3806B-1968 CLOTH, AIRPLANE, COTTON, MERCERIZED 80 lb Breaking Strength
- SAE AMS3804B-1969 CLOTH, AIRPLANE, COTTON, MERCERIZED 65 lb Breaking Strength
- SAE TS356-1-1987 TS356 Test for Electrical Connectors Contact Bending Strength
- SAE AMS3777/9B-1995 Tape, Nylon, Nonmelting, Reinforcing 2 (50) Wide, 3000 (13,345 N) Breaking Strength
- SAE AMS3777/7A-1993 TAPE, NYLON, NONMELTING, REINFORCING 2 (50) Wide, 1500 (6670 N) Breaking Strength
- SAE AMS3777/8A-1993 TAPE, NYLON, NONMELTING, REINFORCING 2 (50) Wide, 2000 (8895 N) Breaking Strength
- SAE AMS3777/3A-1993 TAPE, NYLON, NONMELTING, REINFORCING 1 (25) Wide, 1000 (4450 N) Breaking Strength
- SAE AMS3777/8-1995 TAPE, NYLON, NONMELTING, REINFORCING 2 (50) Wide, 2000 (8895 N) Breaking Strength
- SAE AMS3777/7-1995 TAPE, NYLON, NONMELTING, REINFORCING 2 (50) Wide, 1500 (6670 N) Breaking Strength
- SAE AMS3777/5A-1993 TAPE, NYLON, NONMELTING, REINFORCING 1 (25) Wide, 525 (2335 N) Breaking Strength
- SAE AMS3777/5-1995 TAPE, NYLON, NONMELTING, REINFORCING 1 (25) Wide, 525 (2335 N) Breaking Strength
- SAE AMS3777/9-1995 TAPE, NYLON, NONMELTING, REINFORCING 2 (50) Wide, 3000 (13,345 N) Breaking Strength
- SAE AMS3777/3-1995 TAPE, NYLON, NONMELTING, REINFORCING 1 (25) Wide, 1000 (4450 N) Breaking Strength
- SAE AMS3806C-1980 CLOTH, AIRPLANE, COTTON, MERCERIZED 80 lb (355 N) Breaking Strength
- SAE AIR1418A-1980 Flexure Fatigue Strength of Tube Fitting Joints R(2001)
- SAE AMS3777/2A-1993 TAPE, NYLON, NONMELTING, REINFORCING 9/16 (14) Wide, 500 (2225 N) Breaking Strength
- SAE AMS3777/2-1995 TAPE, NYLON, NONMELTING, REINFORCING 9/16 (14) Wide, 500 (2225 N) Breaking Strength
- SAE AMS3777/6-1995 TAPE, NYLON, NONMELTING, REINFORCING 5/16 (8) Wide, 350 (1555 N) Breaking Strength
- SAE AMS3777/9A-1993 TAPE, NYLON, NONMELTING, REINFORCING 2 (50) Wide, 3000 (13, 345 N) Breaking Strength
- SAE AMS3777/4A-1993 TAPE, NYLON, NONMELTING, REINFORCING 1–1/2 (38) Wide, 1500 (6670 N) Breaking Strength
- SAE AMS3777/1A-1993 TAPE, NYLON, NONMELTING, REINFORCING 3/4 (19) Wide, 400 (1780 N) Breaking Strength
- SAE AMS3777/1-1995 TAPE, NYLON, NONMELTING, REINFORCING 3/4 (19) Wide, 400 (1780 N) Breaking Strength
- SAE AMS3792/2-1983 TAPE, LOW MODULUS ARAMID 2 (50), 1,000 (4,450) Breaking Strength
- SAE AMS3792/3A-1994 TAPE, LOW MODULUS ARAMID 2 (51), 3000 (13,345) Breaking Strength
- SAE AMS3792/1-1983 TAPE, LOW MODULUS ARAMID 2 (50), 300 (1,335) Breaking Strength
- SAE AMS3792/1A-1994 TAPE, LOW MODULUS ARAMID 2 (51), 300 (1334) Breaking Strength
- SAE AMS3792/3-1983 TAPE, LOW MODULUS ARAMID 2 (50), 3,000 (13,345) Breaking Strength
- SAE AMS3792/2A-1994 TAPE, LOW MODULUS ARAMID 2 (51), 1000 (4448) Breaking Strength
- SAE AMS3806F-1993 Cloth@ Airplane@ Mercerized Cotton 80 Pounds Force (356 N) Breaking Strength
- SAE AMS3802D-1991 CLOTH, AIRPLANE, COTTON, MERCERIZED 50 lb (220 N) Breaking Strength
- SAE AMS3804C-2011 CLOTH, AIRPLANE, COTTON, MERCERIZED 65 lb (290 N) Breaking Strength
- SAE AMS3777/4-1995 TAPE, NYLON, NONMELTING, REINFORCING 1-1/2 (38) Wide, 1500 (6670 N) Breaking Strength
- SAE AMS3806E-2006 Cloth, Airplane, Mercerized Cotton 80 Pounds Force (356 N) Breaking Strength
- SAE AMS3806F-2013 Cloth, Airplane, Mercerized Cotton, 80 Pounds Force (356 N) Breaking Strength
- SAE AMS3797/4A-1989 WEBBING, NYLON, INTEGRAL LOCKING SLOTS 1 (25) Wide, 4000 (17,793) Breaking Strength
- SAE AMS3797/5-1983 WEBBING, NYLON, INTEGRAL LOCKING SLOT 1 (25) Wide, 5,000 (22,000) Breaking Strength
- SAE AMS3797/3-1983 WEBBING, NYLON, INTEGRAL LOCKING SLOT 1 (25) Wide, 3,000 (13,345) Breaking Strength
- SAE AMS3797/4-1983 WEBBING, NYLON, INTEGRAL LOCKING SLOT 1 (25) Wide, 4,000 (17,790) Breaking Strength
- SAE AMS3797/3A-1989 WEBBING, NYLON, INTEGRAL LOCKING SLOTS 1 (25) Wide, 3000 (13,345) Breaking Strength
- SAE AMS3797/5A-1989 WEBBING, NYLON, INTEGRAL LOCKING SLOTS 1 (25) Wide, 5000 (22,241) Breaking Strength
IPC - Association Connecting Electronics Industries, Bending Strength Breaking Strength
Professional Standard - Aviation, Bending Strength Breaking Strength
- HB 5295-1984 Kiscc test method for cantilever-bending pre-cracked specimens of high-strength alloys
- HB/Z 89.3-1985 Calculation of Bending Fatigue Strength of Aviation Bevel Gear Tooth
- HB 5434.6-1989 Method for determination of standard flexural strength of aircraft wheel brakes
Group Standards of the People's Republic of China, Bending Strength Breaking Strength
- T/CSAE 155-2020 U-shaped constant bending load test method for hydrogen induced delayed fracture sensitivity of ultra high strength automobile steel plate
- T/CSTM 00587-2023 Test method for flexural strength of crystalline silicon cells—Four-point flexural
- T/CSEB 0002-2018 Testing method for determining dynamic bending strength of rock materials by the Semi-circular Bending specimen
CEN - European Committee for Standardization, Bending Strength Breaking Strength
- EN ISO 29864:2019 Self adhesive tapes - Measurement of breaking strength and elongation at break
- EN ISO 3327:2009 Hardmetals - Determination of transverse rupture strength
Standard Association of Australia （SAA）, Bending Strength Breaking Strength
- AS ISO 10545.4:2020 Ceramic tiles, Method 4: Determination of modulus of rupture and breaking strength
- AS/NZS 4266.5(Int):2001 Reconstituted wood-based panels - Methods of test - Modulus of elasticity in bending and bending strength
ES-UNE, Bending Strength Breaking Strength
- UNE-EN ISO 29864:2020 Self adhesive tapes - Measurement of breaking strength and elongation at break (ISO 29864:2018)
- UNE-EN ISO 10545-4:2019 Ceramic tiles - Part 4: Determination of modulus of rupture and breaking strength (ISO 10545-4:2019)
- UNE-EN 14617-2:2016 Agglomerated stone - Test methods - Part 2: Determination of flexural strength (bending)
AT-ON, Bending Strength Breaking Strength
PL-PKN, Bending Strength Breaking Strength
- PN C04243-1972 Plastics Determination of flexural streng?hby Dynstat apparatus
- PN P04884-04-1987 Medical knitted articles Blood vessel prosthesis Determination of breaking strength and breaking alongation
- PN P04930-07-1993 Wool. Determination of tensile breaking strength and elongation at rupture for fibres
- PN D04216-1965 Lignofol i lignos?on Oznaczanie wytrzyma?o?ci na zginanie statyczne
- PN H04942-1986 Sintered metal materials Determination of transverse rupture strength
- PN H04946-1991 Metallic powders. Determination of green strength by transvere rupture of compacts
Japanese Industrial Standards Committee (JISC), Bending Strength Breaking Strength
- JIS A 1106:1993 Method of test for flexural strength of concrete
- JIS A 1114:1993 Method of test for compressive strength of concrete using portions of beams broken in flexure
- JIS R 1607:1995 Testing methods for fracture toughness of fine ceramics
- JIS R 1664:2004 Testing method for bending strength of porous fine ceramics
- JIS G 0564:1999 Metallic materials -- Determination of plane-strain fracture toughness
- JIS R 1607:2010 Testing methods for fracture toughness of fine ceramics at room temperature
- JIS R 1607:2015 Testing methods for fracture toughness of fine ceramics at room temperature
- JIS R 1624:1995 Testing method for bending strength of fine ceramic joint
- JIS B 1759:2013 Estimation of tooth bending strength of cylindrical plastic gears
- JIS R 1624:2010 Testing method for bending strength of fine ceramic joint
- JIS A 1183:1995 Method of test for compressive strength of polyester resin concrete using portions of beams broken in flexure
- JIS K 6274:2006 Rubber and plastics -- Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength
- JIS K 6274:2018 Rubber and plastics -- Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength
- JIS R 1663:2004 Testing method for flexural strength of continuous fiber-reinforced ceramic matrix composites
- JIS R 1760:2016 Test method for fracture resistance of fine ceramics at room temperature by indentation fracture (IF) method
- JIS K 6400-5:2012 Flexible cellular polymeric materials -- Physical properties -- Part 5: Determination of tensile strength, elongation at break and tear strength
Professional Standard - Building Materials, Bending Strength Breaking Strength
- JC/T 676-1997 Test method for flexure of glass material
- JC/T 263-1993 Performance test method for cast stone products. Bending strength test
CU-NC, Bending Strength Breaking Strength
- NC 41-32-3-1985 Leather. Conglomerate Determination of Breakíng Elongation and Tensile Strength
- NC 40-73-1985 Textiles. Determination of Puli B reaking Strength and Elongation of Fibres. Testing Methods
Institute of Interconnecting and Packaging Electronic Circuits (IPC), Bending Strength Breaking Strength
Military Standard of the People's Republic of China-General Armament Department, Bending Strength Breaking Strength
- GJB 1483-1992 Kie test method for surface crack fracture toughness of ultra-high strength steel plates
TH-TISI, Bending Strength Breaking Strength
- TIS 1683-1998 Implants for surgery.determination of bending strength and stiffness of bone plates
Professional Standard - Automobile, Bending Strength Breaking Strength
- QC/T 637-2000 Automobile engine crankshaft bending fatigue strength test method
VN-TCVN, Bending Strength Breaking Strength
- TCVN 4032-1985 Cements.Test methods of bending and compression strengths
- TCVN 3119-1993 Heavy weight concrete.Method for the determination of flexural strength
- TCVN 5787-1994 Textiles.Determination of breaking strength of yarn by the skein method
- TCVN 5048-1990 Hardmetals.Method of determination of transverse rupture strength
- TCVN 6034-1995 Textile cotton fibres.Determination of breaking tenacity of flat bundles
Professional Standard - Aerospace, Bending Strength Breaking Strength
- QJ 2199-1991 Test method for flexural strength of rigid foamed plastics
IN-BIS, Bending Strength Breaking Strength
ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, Bending Strength Breaking Strength
- PREN 6061-1995 Aerospace Series Fibre Reinforced Plastics Test Method Determination of Sandwich Flexural Strength 4 Point Bending (Edition P1)
Professional Standard - Medicine, Bending Strength Breaking Strength
- YY/T 0342-2002 Implants for surgery----Determination of bending strength and stiffness of bone plates
国家药监局, Bending Strength Breaking Strength
- YY/T 0342-2020 Implants for surgery----Determination of bending strength and stiffness of bone plates
American Gear Manufacturers Association, Bending Strength Breaking Strength
AGMA - American Gear Manufacturers Association, Bending Strength Breaking Strength
- 932-A05-2005 Rating the Pitting Resistance and Bending Strength of Hypoid Gears
- 91FTM7-1991 Low Cycle and Static Bending Strength of Carburized and High Hardness Through Hardened Gear Teeth
- P229.24-1982 Improvement in the Conventional Analysis of Gear Tooth Bending Fatigue Strength
Professional Standard - Agriculture, Bending Strength Breaking Strength
HU-MSZT, Bending Strength Breaking Strength
Canadian General Standards Board （CGSB), Bending Strength Breaking Strength
API - American Petroleum Institute, Bending Strength Breaking Strength
- API BULL 5C4-1987 Bulletin on Round Thread Casing Joint Strength with Combined Internal Pressure and Bending
SG-SPRING SG, Bending Strength Breaking Strength
- SS 78 Pt.A19-1987 Testing Concrete Part A19 : Method For Determination Of Compressive Strength Using Portions Of Beams Broken In Flexure (Equivalent Cube Method)
NZ-SNZ, Bending Strength Breaking Strength
- AS/NZS 1635.5.1:1995 Methods of Test for Pressure-Sensitive Adhesive Tape Method 5.1: Breaking Strength
NO-SN, Bending Strength Breaking Strength
- NS 3507-1982 Floorcoverings - Tensile strength and elongation at rupture
GM North America, Bending Strength Breaking Strength
YU-JUS, Bending Strength Breaking Strength
- JUS F.S2.242-1984 Cotton fibres. Test method for braaking strength. Pretsley apparatus
- JUS D.A1.046-1979 Testing ofwood. Determination ofuttimate strength in static bending
Hubei Provincial Standard of the People's Republic of China, Bending Strength Breaking Strength
- DB42/T 464-2008 The Testing method of breaking strength and breaking elongation of Polymer fibres used in construction
NL-NEN, Bending Strength Breaking Strength
- NEN-ISO 3327:1993 Hardmetals. Determination of transverse rupture strength (ISO 3327:1982)
American National Standards Institute （ANSI), Bending Strength Breaking Strength
Professional Standard - Light Industry, Bending Strength Breaking Strength
- QB/T 4118-2010 Footwear.Test methods for uppers.Tensile strength and elongation
Sichuan Provincial Standard of the People's Republic of China, Bending Strength Breaking Strength
- DB51/T 2150.2-2016 Nylon/spandex covered yarn test method part 2: breaking strength and elongation at break
- DB51/T 1916.6-2014 Aramid III Fiber Test Methods Part 6: Breaking Strength, Elongation at Break and Modulus
工业和信息化部, Bending Strength Breaking Strength
- JC/T 2405-2017 Test method for flexural strength of continuous fiber reinforced ceramic matrix composites at room temperature
(U.S.) Parachute Industry Association, Bending Strength Breaking Strength