ZH
RU
ES

Three-point bending breaking strength

Three-point bending breaking strength, Total:82 items.

In the international standard classification, Three-point bending breaking strength involves: Inorganic chemicals, Medical equipment, Glass, Waxes, bituminous materials and other petroleum products, Construction materials, Paper and board, Earthworks. Excavations. Foundation construction. Underground works, Refractories, Products of the textile industry, Road vehicle systems, Ceramics, Products of the chemical industry.

Association Francaise de Normalisation, Three-point bending breaking strength

NF EN ISO 10545-4:2019 Carreaux et dalles céramiques - Partie 4 : détermination de la résistance à la flexion et de la force de rupture
XP T66-078*XP CEN/TS 15963:2014 Bitumen and bituminous binders - Determination of the fracture toughness temperature by a three point bending test on a notched specimen
XP CEN/TS 15963:2014 Bitumes et liants bitumineux - Détermination de la température de résistance à la fissuration par un essai de flexion 3 points sur un barreau entaillé
NF EN 658-5:2003 Céramiques techniques avancées - Propriétés mécaniques des céramiques composites à température ambiante - Partie 5 : détermination de la résistance au cisaillement interlaminaire par essai de flexion sur appuis rapprochés (trois points)
NF B41-208*NF EN 843-3:2005 Advanced technical ceramics - Mechanical properties of monolithic ceramics at room temperature - Part 3 : determination of subcritical crack growth parameters from constant stressing rate flexural strength tests
NF B43-205*NF EN 658-5:2003 Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Part 5 : determination of interlaminar shear strength by short span bend test (three points).

Korean Agency for Technology and Standards (KATS), Three-point bending breaking strength

KS L 1591-1994 Testing method for flexural strength(modulus of rupture) of high performance ceramics
KS B ISO 11984:2014 Ophthalmic optics — Contact lenses — Determination of rigid lens flexure and breakage
KS B ISO 11984:2005 Ophthalmic optics-Contact lenses-Determination of rigid lens flexure and breakage
KS F 2413-1995 Testing method for compressive strength of concrete using portions of beams broken in flexure
KS F 2413-2015 Method of test for compressive strength of concrete using portions of beams broken in flexure
KS M ISO 11093-6:2022 Paper and board — Testing of cores — Part 6: Determination of bending strength by the three-point method
KS M ISO 11093-6:2016 Paper and board - Testing of cores - Part 6 : Determination of bending strength by the three-point method
KS F 2483-2014 Method of test for compressive strength of polyester resin concrete using portions of beams broken in flexure
KS M ISO 12986-1-2004(2009) Carbonaceous materials used in the production of aluminium－Prebaked anodes and cathode blocks－Part 1：Determination of bending/shear strength by a three-point method

RO-ASRO, Three-point bending breaking strength

STAS 11175-1978 Refractory mortars with chemical bindings DETERMINATION OF FRACTURE STRENGTH AT JOINT BENDING

German Institute for Standardization, Three-point bending breaking strength

DIN 51902:1997 Testing of carbon materials - Determination of flexural strength by three point method - Solid matters
DIN 51902:2020 Testing of carbonaceous materials - Determination of flexural strength by three point method - Solid materials
DIN ISO 11093-6:2005-09 Paper and board - Testing of cores - Part 6: Determination of bending strength by the three-point method (ISO 11093-6:2005)
DIN 51902:2020-12 Testing of carbonaceous materials - Determination of flexural strength by three point method - Solid materials
DIN SPEC 1026:2010 Bitumen and bituminous binders - Determination of the fracture toughness temperature by a three point bending test on a notched specimen; German version CEN/TS 15963:2010
DIN EN 658-5:2003-03 Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Part 5: Determination of interlaminar shear strength by short span bend test (three-points); German version EN 658-5:2002

American Society for Testing and Materials (ASTM), Three-point bending breaking strength

ASTM C158-95 Standard Test Methods for Strength of Glass by Flexure (Determination of Modulus of Rupture)
ASTM C158-95(2000) Standard Test Methods for Strength of Glass by Flexure (Determination of Modulus of Rupture)
ASTM C158-02 Standard Test Methods for Strength of Glass by Flexure (Determination of Modulus of Rupture)
ASTM F417-78(1996) Test Method for Flexural Strength (Modulus of Rupture) of Electronic-Grade Ceramics (Withdrawn 2001)
ASTM F394-78(1996) Test Method for Biaxial Flexure Strength (Modulus of Rupture) of Ceramic Substrates (Withdrawn 2001)
ASTM C1018-97 Standard Test Method for Flexural Toughness and First-Crack Strength of Fiber-Reinforced Concrete (Using Beam With Third-Point Loading) (Withdrawn 2006)
ASTM D8058-19 Standard Test Method for Determining the Flexural Strength of a Geosynthetic Cementitious Composite Mat (GCCM) Using the Three-Point Bending Test
ASTM C1505-01 Standard Test Method for Determination of Breaking Strength of Ceramic Tiles by Three-Point Loading
ASTM C1505-01(2007) Standard Test Method for Determination of Breaking Strength of Ceramic Tiles by Three-Point Loading
ASTM C1505-15(2022) Standard Test Method for Determination of Breaking Strength and Modulus of Rupture of Ceramic Tiles and Glass Tiles by Three-Point Loading
ASTM D8058-23 Standard Test Method for Determining the Flexural Strength of a Geosynthetic Cementitious Composite Mat (GCCM) Using the Three-Point Bending Test
ASTM C78/C78M-10e1 Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)
ASTM C78/C78M-22 Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)
ASTM C78/C78M-15 Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)
ASTM C1505-15 Standard Test Method for Determination of Breaking Strength and Modulus of Rupture of Ceramic Tiles and Glass Tiles by Three-Point Loading
ASTM D1634-00(2006) Standard Test Method for Compressive Strength of Soil-Cement Using Portions of Beams Broken in Flexure (Modified Cube Method)
ASTM D1634-00 Standard Test Method for Compressive Strength of Soil-Cement Using Portions of Beams Broken in Flexure (Modified Cube Method)
ASTM D1634-17 Standard Test Method for Compressive Strength of Soil-Cement Using Portions of Beams Broken in Flexure (Modified Cube Method)
ASTM D7972-14(2020) Standard Test Method for Flexural Strength of Manufactured Carbon and Graphite Articles Using Three-Point Loading at Room Temperature

European Committee for Standardization (CEN), Three-point bending breaking strength

EN ISO 11984:1999 Ophthalmic Optics - Contact Lenses - Determination of Rigid Lens Flexure and Breakage ISO 11984: 1999
PD CEN/TS 15963:2014 Bitumen and bituminous binders - Determination of the fracture toughness temperature by a three point bending test on a notched specimen
DD ENV 658-5-1993 Advanced technical ceramics; mechanical properties of ceramic composites at room temperature; part 5: determination of shear strength by short span bend test (three-point)
EN 658-5:2002 Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Part 5: Determination of interlaminar shear strength by short span bend test (three points)

International Organization for Standardization (ISO), Three-point bending breaking strength

ISO 11984:1999 Ophthalmic optics - Contact lenses - Determination of rigid lens flexure and breakage
ISO 23242:2020 Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for flexural strength of monolithic ceramic thin plates at room temperature by three-point or four-point bending

Danish Standards Foundation, Three-point bending breaking strength

DS/CEN/TS 15963:2010 Bitumen and bituminous binders - Determination of the fracture toughness temperature by a three point bending test on a notched specimen
DS/EN 658-5:2003 Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Part 5: Determination of interlaminar shear strength by short span bend test (three points)
DS/ENV 658-5:1993 Advanced technical ceramic. Mechanical properties of ceramic composites at room temperature. Part 5: Determination of shear strength by short span bend test (three-point)

British Standards Institution (BSI), Three-point bending breaking strength

BS PD CEN/TS 15963:2014 Bitumen and bituminous binders. Determination of the fracture toughness temperature by a three point bending test on a notched specimen
BS DD CEN/TS 15963:2010 Bitumen and bituminous binders - Determination of the fracture toughness temperature by a three point bending test on a notched specimen
BS ISO 11093-6:2005 Paper and board. Testing of cores - Determination of bending strength by the three-point method
BS ISO 23242:2020 Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for flexural strength of monolithic ceramic thin plates at room temperature by three-point or four-point bending
19/30375027 DC BS ISO 23242. Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for flexural strength of monolithic ceramic thin plates at room temperature by three-point or four-point bending
BS 1881-119:1983 Testing concrete - Method for determination of compressive strength using portions of beams broken in flexure (equivalent cube method)
BS 1881-119:2011 Testing concrete. Method for determination of compressive strength using portions of beams broken in flexure (equivalent cube method)
BS EN 658-5:2003 Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Determination of interlaminar shear strength by short span bend test (three points)
BS EN 658-5:2002 Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Determination of interlaminar shear strength by short span bend test (three points)

未注明发布机构, Three-point bending breaking strength

BS PD CEN TS 15963:2014 Bitumen and bituminous binders — Determination of the fracture toughness temperature by a three point bending test on a notched specimen

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Three-point bending breaking strength

GB/T 22906.6-2008 Testing of cores.Part 6：Determination of bending strength by three-point method

TR-TSE, Three-point bending breaking strength

TS 3287-1979 STANDARD METHOD OF TEST FOR COMPRESSIVE STRENGTH OF CONCRETE USING PORTIONS OF BEAMS BROKEN IN FLEXURE

KR-KS, Three-point bending breaking strength

KS F 2326-2022 Test method for compressive strength of soil cement using portions of beam broken in flexure
KS M ISO 11093-6-2016 Paper and board - Testing of cores - Part 6 : Determination of bending strength by the three-point method
KS M ISO 11093-6-2022 Paper and board — Testing of cores — Part 6: Determination of bending strength by the three-point method

RU-GOST R, Three-point bending breaking strength

GOST 23775-1979 Carbon products. Methods of determination for compressive, bend, tensile, strengths (diametral compression)

The American Road & Transportation Builders Association, Three-point bending breaking strength

AASHTO T 140-1997(R2009) Standard Method of Test for Compressive Strength of Concrete Using Portions of Beams Broken in Flexure
AASHTO T 97-2014 Standard Method of Test for Flexural Strength of Concrete (Using Simple Beam with Third- Point Loading)

AASHTO - American Association of State Highway and Transportation Officials, Three-point bending breaking strength

T 140-1997 Standard Method of Test for Compressive Strength of Concrete Using Portions of Beams Broken in Flexure
T140-1997 Standard Specification for Compressive Strength of Concrete Using Portions of Beams Broken in Flexure (Nineteenth Edition; ASTM C116-90)
T 97-2017 Standard Method of Test for Flexural Strength of Concrete (Using Simple Beam with Third- Point Loading)
T 97-2014 Standard Method of Test for Flexural Strength of Concrete (Using Simple Beam with Third- Point Loading)
T140-1993 Standard Specification for Compressive Strength of Concrete Using Portions of Beams Broken in Flexure (ASTM C116-90) (Eighteenth Edition; ASTM C 116-90)

Group Standards of the People's Republic of China, Three-point bending breaking strength

T/CSAE 155-2020 U-shaped constant bending load test method for hydrogen induced delayed fracture sensitivity of ultra high strength automobile steel plate

IN-BIS, Three-point bending breaking strength

IS 2380 Pt.4-1977

AT-ON, Three-point bending breaking strength

ONORM ENV 658-5-1993 Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Part 5: Determination of shear strength by short span bend test (three-point)

SG-SPRING SG, Three-point bending breaking strength

SS 78 Pt.A19-1987 Testing Concrete Part A19 : Method For Determination Of Compressive Strength Using Portions Of Beams Broken In Flexure (Equivalent Cube Method)

WRC - Welding Research Council, Three-point bending breaking strength

BULLETIN 299-1984 ENGINEERING ASPECTS OF CTOD FRACTURE TOUGHNESS TESTING ; THREE-DIMENSIONAL ELASTIC-PLASTIC FINITE ELEMENT ANALYSIS OF THREE-POINT BEND SPECIMEN ; FAILURE PREDICTION OF NOTCHED PRESSURE VESSELS USING T

Lithuanian Standards Office , Three-point bending breaking strength

LST EN 658-5-2003 Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Part 5: Determination of interlaminar shear strength by short span bend test (three points)

American Welding Society (AWS), Three-point bending breaking strength

WRC 299:1984 Part 1: Engineering Aspects of CTOD Fracture Toughness Testing; Part 2: Three-Dimensional Elastic-Plastic Finite Element Analysis of Three-Point Bend Specimen; Part 3: Failure Prediction of Notched Pressure Vessels Using The CTOD Approach

ES-UNE, Three-point bending breaking strength

UNE-EN 658-5:2002 Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Part 5: Determination of interlaminar shear strength by short span bend test (three points) (Endorsed by AENOR in February of 2003.)

NL-NEN, Three-point bending breaking strength

NVN-ENV 658-5-1994 Advanced technical ceramics. Mechanical properties for ceramic composites at room temperature. Part 5: Determination of shear strength by short span bend test (three-point)