ZH
RU
ES

ready-made samples

ready-made samples, Total:42 items.

In the international standard classification, ready-made samples involves: Analytical chemistry, Space systems and operations, Thermodynamics and temperature measurements, Products of the chemical industry, Non-ferrous metals, Products of non-ferrous metals, Protection of and in buildings, Materials for aerospace construction, Applications of information technology, Industrial automation systems, Construction materials, Plastics, Welding, brazing and soldering, Rubber and plastics products, Laboratory medicine, Soil quality. Pedology, Printed circuits and boards, Products of the textile industry, Paints and varnishes.

German Institute for Standardization, ready-made samples

DIN EN ISO 9862:2023 Geosynthetics - Sampling and preparation of test specimens (ISO/DIS 9862:2022); German and English version prEN ISO 9862:2022
DIN EN 16602-20-10:2014 Space product assurance - Off-the-shelf items utilization in space systems; English version EN 16602-20-10:2014
DIN SPEC 91127:2011 Recommendation for Temperature Calibration of Fast Scanning Calorimeters (FSCs) for Sample Mass and Scan Rate; Text in English
DIN EN 573-3:2009 Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 3: Chemical composition and form of products; English version of DIN EN 573-3:2009-08
DIN EN ISO 293:2023-10 Plastics - Compression moulding of test specimens of thermoplastic materials (ISO 293:2023); German version EN ISO 293:2023
DIN EN 16783:2017 Thermal insulation products - Product category rules (PCR) for factory made and in-situ formed products for preparing environmental product declarations; German version EN 16783:2017
DIN EN 2043:2013 Aerospace series - Metallic materials - General requirements for semi-finished product qualification (excluding forgings and castings); German and English version EN 2043:2013
DIN EN 16602-60-12:2014 Space product assurance - Design, selection, procurement and use of die form monolithic microwave integrated circuits (MMICs); English version EN 16602-60-12:2014
DIN EN ISO 24459:2023-09 Determination of uranium content in samples coming from the nuclear fuel cycle by L-absorption edge spectrometry (ISO 24459:2021); English version EN ISO 24459:2023
DIN EN 14064-2:2010 Thermal insulation products for buildings - In-situ formed loose-fill mineral wool (MW) products - Part 2: Specification for the installed products; German version EN 14064-2:2010
DIN EN ISO 24459:2023 Determination of uranium content in samples coming from the nuclear fuel cycle by L-absorption edge spectrometry (ISO 24459:2021); English version prEN ISO 24459:2023
DIN EN 14064-1:2010 Thermal insulation products for buildings - In-situ formed loose-fill mineral wool (MW) products - Part 1: Specification for the loose-fill products before installation; German version EN 14064-1:2010
DIN EN ISO 10724-1:2002 Plastics - Injection moulding of test specimens of thermosetting powder moulding compounds (PMCs) - Part 1: General principles and moulding of multipurpose test specimens (ISO 10724-1:1998); German version EN ISO 10724-1:2001
DIN EN ISO 16021:2023 Urine-absorbing products - Basic principles for evaluation of single-use adult-incontinence products from the perspective of users and caregivers (ISO/DIS 16021:2023); German and English version prEN ISO 16021:2023
DIN EN 15599-2:2010 Thermal insulation products for building equipment and industrial installations - In-situ thermal insulation formed from expanded perlite (EP) products - Part 2: Specification for the installed products; German version EN 15599-2:2010
DIN EN 16809-2:2017 Thermal insulation products of buildings - In-situ formed products from loose-fill expanded polystyrene (EPS) beads and bonded expanded polystyrene beads - Part 2: Specification for the bonded and loose-fill products after installation; German version EN
DIN EN 12814-1 Corrigendum 1:2004 Testing of welded joints of thermoplastics semi-finished products - Part 1: Bend test Corrigendum 1 to English version of DIN EN 12814-1:1999-12
DIN EN ISO 13000-2:2006 Plastics - Polytetrafluoroethylene (PTFE) semi-finished products - Part 2: Preparation of test specimens and determination of properties (ISO 13000-2:2005); English version of DIN EN ISO 13000-2:2006-02
DIN EN ISO 13000-2:2021 Plastics - Polytetrafluoroethylene (PTFE) semi-finished products - Part 2: Preparation of test specimens and determination of properties (ISO 13000-2:2021); German version EN ISO 13000-2:2021
DIN EN ISO 15193:2009 In vitro diagnostic medical devices - Measurement of quantities in samples of biological origin - Requirements for content and presentation of reference measurement procedures (ISO 15193:2009); English version of DIN EN ISO 15193:2009-10
DIN EN 15600-2:2010 Thermal insulation products for building equipment and industrial installations - In-situ thermal insulation formed from exfoliated vermiculite (EV) products - Part 2: Specification for the installed products; German version EN 15600-2:2010
DIN EN 15599-1:2010 Thermal insulation products for building equipment and industrial installations - In-situ thermal insulation formed from expanded perlite (EP) products - Part 1: Specification for bonded and loose-fill products before installation; German version EN 15599
DIN EN 10028-2 Corrigendum 1:2006 Flat products made of steels for pressure purposes-Part 2:Non-alloy and alloy steels with specified elevated temperature properties Corrigendum 1 to English version of DIN EN 10028-2:2003-09
DIN EN ISO 12782-4:2012 Soil quality - Parameters for geochemical modelling of leaching and speciation of constituents in soils and materials - Part 4: Extraction of humic substances from solid samples (ISO 12782-4:2012); German version EN ISO 12782-4:2012
DIN EN ISO 12782-5:2012 Soil quality - Parameters for geochemical modelling of leaching and speciation of constituents in soils and materials - Part 5: Extraction of humic substances from aqueous samples (ISO 12782-5:2012); German version EN ISO 12782-5:2012
DIN EN 61193-3:2013 Quality assessment systems - Part 3: Selection and use of sampling plans for printed board and laminate end-product and in-process auditing (IEC 61193-3:2013); German version EN 61193-3:2013
DIN EN 13719 Corrigendum 1:2005 Geotextiles and geotextile-related products - Determination of the long term protection efficiency of geotextiles in contact with geosynthetic barriers Corrigendum 1 to English version of DIN EN 13719:2002-12
DIN EN ISO 16773-4:2009 Paints and varnishes - Electrochemical impedance spectroscopy (EIS) on high-impedance coated specimens - Part 4: Examples of spectra of polymer-coated specimens (ISO 16773-4:2009); English version of DIN EN ISO 16773-4:2009-09

American Society for Testing and Materials (ASTM), ready-made samples

ASTM E1727-05 Standard Practice for Field Collection of Soil Samples for Subsequent Lead Determination
ASTM E1729-05 Standard Practice for Field Collection of Dried Paint Samples for Subsequent Lead Determination

Professional Standard - Aviation, ready-made samples

HB 5618.2-1988 Basic product drawing management system (life-saving specialty) Complete set of product drawings and main technical documents
HB 5613.2-1988 Basic product pattern management system (air-to-air missile major) Complete set of design patterns and technical documents

CU-NC, ready-made samples

NC 90-13-33-1986 Reference Standard Samples. Sulfidic Quartz Rock AA MPR of the Composition for Chemical Analysis

British Standards Institution (BSI), ready-made samples

BS EN 16274:2012 Methods for analysis of allergens. Quantification of suspected fragrance allergens in consumer products. Step 1: GC analysis of ready-to-inject sample

GM Europe, ready-made samples

GME 7061-2013 Determination of Residual Dirt on Finished Engine and Gear Components and Pipe Assemblies (Revision 2; English/German; Includes Appendix A)

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, ready-made samples

GB/T 16656.21-1997 Industrial automation system and integration--Product data representation and exchange--Part 21: Implementation method: Clear text encoding of the exchange structure
GB/T 16656.21-2008 Industrial automation systems and integration.Product data representation and exchange.Part 21:Implementation methods.Clear text encoding of the exchange structrue

International Organization for Standardization (ISO), ready-made samples

ISO 10303-21:2001 Industrial automation systems and integration -Product data representation and exchange-Part 21:Implementation methods-Clear text encoding of the exchange structrue
ISO 10303-21:2016 Industrial automation systems and integration - Product data representation and exchange - Part 21: Implementation methods: Clear text encoding of the exchange structure
ISO 10303-21:2002 Industrial automation systems and integration - Product data representation and exchange - Part 21: Implementation methods: Clear text encoding of the exchange structure
ISO/TS 10303-1367:2010 Industrial automation systems and integration - Product data representation and exchange - Part 1367: Application module: Textual expression representation

Korean Agency for Technology and Standards (KATS), ready-made samples

KS B ISO 10303-21:2005 Industrial automation systems and integration－Product data representation and exchange－Part 21：Clear text encoding of the exchange structures