ZH
RU
ES

Ore grade

Ore grade, Total:444 items.

In the international standard classification, Ore grade involves: Mining and quarrying, Metalliferous minerals, Vocabularies, Nuclear energy engineering, Energy and heat transfer engineering in general, Waxes, bituminous materials and other petroleum products, Non-metalliferous minerals, Non-ferrous metals, Fuels, Construction materials, Protection of and in buildings, Petroleum products in general, HEALTH CARE TECHNOLOGY, Lubricants, industrial oils and related products, Environmental protection, Equipment for petroleum and natural gas industries, Iron and steel products, Information sciences. Publishing, Refractories, Water quality, Occupational safety. Industrial hygiene, Air quality, Analytical chemistry, Fluid storage devices, Protection against dangerous goods, Organic chemicals, Testing of metals, Surface treatment and coating.

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Ore grade

GB/T 29998-2013 Benefit calculation to determine the mining and processing of low-grade ore of copper mine
GB/T 13070-1991 Determination of uranium content in uranium ores by method of potentiometric titration
GB 31337-2014 The norm of the energy consumption per unit ore of iron ore dressing
GB/T 32545-2016 Division of production grade for iron ores
GB/T 1868-1995 Phosphate rock and concentrate--Methods of sampling and preparing sample
GB 5463.3-1986 Technical terms of non－metallic mineral products－Gypsum and anhydrite
GB/T 5463.3-1986 Technical terms of non-metallic mineral products--Gypsum and anhydrite
GB/T 6730.66-2009 Iron ores-Determination of total iron content-Automatic potentiometric titration method
GB 31340-2014 The norm of energy consumption per unit products of tungsten concentrates
GB 29146-2012 The norm of energy consumption per unit products of molybdenum concentrate
GB/T 5463.2-1985 Technical terms of non-metallic mineral products--Talc
GB 32033-2015 Norm of energy consumption per unit products for mineral processing and metallurgy of gold
GB 32032-2015 Norm of energy consumption per unit products of gold mining
GB/T 24233-2009 Manganese and chromium ores.Experimental methods for evaluation of quality variation and methods for checking the precision of sampling
GB/T 6730.66-2009(英文版) Iron ores—Determination of total iron content—Automatic potentiometrictitration method
GB/T 13894-1992 Petroleum and liquid petroleum products.Measurement of liquid level in tank.Manual method
GB 29145-2012 The norm of energy consumption per unit products of roasted molybdenum concentrate
GB 21343-2008 The norm of energy consumption per unit product of calcium carbide
GB 21343-2015 Calcium carbide unit product energy consumption limit
GB 29451-2012 The norm of energy consumption per unit product of cast stone
GB 30183-2013 The norm of energy consumption per unit product of rock wool, slag wool and their products
GB/T 5463.2-2013 Non metallic mineral products vocabulary.Part 2:Talc
GB/T 5463.3-2013 Non metallic mineral products vocabulary.Part 3:Gypsum
GB/T 10322.2-2000 Iron ores-Experimental methods for evaluation of quality variation
GB 31335-2014 The norm of the energy consumption per unit product of iron ore surface mining
GB 31336-2014 The norm of energy consumption per unit product of iron ore underground mining
GB/T 13236-2011 Petroleum and liquid petroleum products.Equipment for measurement of liquid levels in storage tanks.Manual method
GB/T 7304-2014 Standard test method for acid number of petroleum products by potentiometric titration
GB/T 1506-2002 Manganese ores--Determination of manganese content--Potentiometric method and ammonium iron (II) sulphate titrimetric method
GB/T 1506-2016 Determination of Manganese Content in Manganese Ore Potentiometric Titration and Ammonium Ferrous Sulfate Titration
GB/T 24220-2009 Chromium ores.Determination of hygroscopic moisture content in analytical samples.Gravimetric method
GB/T 21451.1-2015 Petroleum and liquid petroleum products.Measurement of level and temperature in storage tanks by automatic methods.Part 1:Measurement of level in atmospheric tanks
GB/T 7304-2000 Petroleum products and lubricants-Determination of acid number-Potentiometric titration method
GB/T 6730.85-2023 Preparation and determination of certified reference samples for iron ore chemical analysis
GB 18068.4-2012 Health protection zone for non-metallic mineral products industry.Part 4:Graphite and charcoal industry
GB 25324-2014 The norm of energy consumption for cathode carbon block for aluminium eletrolyzation
GB 25324-2010 The norm of energy consumption for cathode carbon block for aluminium eletrolyzation
GB 18068.2-2012 Health protection zone for non-metallic mineral products industry.Part 2:Lime industry
GB/T 3257.24-1999 Methods for chemical analysis of bauxite--Determination of hydroscopic moisture in analytical samples--Gravimetric method

Professional Standard - Nuclear Industry, Ore grade

EJ 267.4-1984 Determination of uranium in low-grade uranium ore Tri-n-octylphosphine oxide (or trialkylphosphine oxide) extraction 2-(5-bromo-2-pyridylazo)-5-ethylaminophenol spectrophotometric method
EJ/T 554-1991 Determination of Oxygen Isotope of Quartz Single Mineral by Bromine Pentafluoride Method
EJ/T 739-1992 Calculation method of comprehensive energy consumption of uranium ore products
EJ/T 750-1993 The method of taking uranium ore samples on the ore conveyor belt in determining the uranium quantity coefficient

未注明发布机构, Ore grade

BS 6200-3.19.3:1992(2008) Sampling and analysis of iron, steel and other ferrous metals — Part 3 : Methods of analysis — Section 3.19 : Determination of molybdenum — Subsection 3.19.3 : Molybdenum oxide and high grade molybdenite ores : gravimetric method
BS ISO 4512:2000(2001) Petroleum and liquid petroleum products — Equipment for measurement of liquid levels in storage tanks — Manual methods
BS ISO 6296:2000(2003)*BS 2000-439:2001 Methods of test for petroleum and its products — BS 2000 - 439 : Petroleum products — Determination of water — Potentiometric Karl Fischer titration method

RO-ASRO, Ore grade

SR 1314-28-1996 Manganese ores and concentrates-Determination of arsenic content-Potentiometric method
STAS 6922-1990 Non-ferrous ores and concentrates. Sampling and samples forming
SR 10444-1994 Aluminum ores. Sampling Preparation of samples
STAS 1314/18-1975 MANGANESE ORES AND CONCENTRATES Determination of the bulk density of loose product
STAS 1574/20-1975 IRON ORES AND CONCENTRATES Determination of moisture content of laboratory sample
STAS SR ISO 3083:1995 Iron ores, Preparation of samples. Manual rnethod
SR ISO 4296-2:1983 Manganese ores - Sampling - Part 2: Preparation of samples
STAS 9163/21-1974 SILICA—ALUMINA MINING PRODUCTS Determination of montmorillonile content
STAS SR ISO 3082:1995 Iron ores. Increment sampling and sample preparation. Mechanical method
STAS 9163/26-1980 SILICO-ALUM1NOUS MINING PRODUCTS Quartz determination of clayisli substances
STAS 22-1964
STAS SR ISO 8557:1994 Aluminium ores - Determination of hygroscopic moisture in analytical samples - Gravimetric method
STAS SR ISO 7764 Iron ores - Preparation of predried test samples for chemical analysis
STAS SR 11771-14-1994 Natural radionuclides with contamination potential, resulted from ores and raw coals. Determination of tacking uranium in rocks
STAS 1666-1973 Viscosity of petroleum products CONVERSION FROM UNITS OF KINEMATIC VISCOSITY INTO UNITS OF CONVEN?IONAL VISCOSITY
STAS 8494/7-1990 Metallic accessories for mineral wadding self-supporting slabs mounted at asbestoscement walls. Dimensions

RU-GOST R, Ore grade

GOST 26475-1985 Iron and manganese ore products. Terms and definitions
GOST 26136-1984 Iron ores, concentrates, agglomerates and pellets. Methods of sampling and preparation of samples for physical tests
GOST R 52939-2008 Goods non-enriched iron ores. General specifications
GOST R 52030-2003 Petroleum products. Potentiometric method for determination of mercaptan sulphur
GOST 33207-2014 Copper and complex ores, and products of their processing. Methods for weight fraction measurement of copper in mineral forms
GOST 30050-1993 Petroleum products. Total base number. Perchloric acid potentiometric titration method
GOST 32327-2013 Petroleum products. Determination for acid number by potentiometric titration
GOST 19730-1974 Talc and talcomagnesite. Method of sampling and sample preparation for laboratory testing
GOST 11362-1996 Petroleum products and lubricants. Neutralization number. Potentiometric titration method
GOST 11362-1976 Petroleum products. Determination of base, acid and acidity by potentiometric titration
GOST ISO 3771-2013 Petroleum products. Determination of base number method potentiometric titration with perchloric acid
GOST ISO 4263-1-2013 Petroleum and petroleum products. Determination of the ageing behaviour of inhibited oils and fluids. TOST method. Part 1. Mineral oils
GOST 33210-2014 Copper and complex ores and products for their processing. Methods for measurement of sulphur mass fraction
GOST 33209-2014 Copper and complex ores, and products of their processing. Method for measurement of iron weight fraction
GOST R 56856-2016 Copper and complex ores, and products of their processing. Methods of measurement of copper weight fraction
GOST R 56858-2016 Copper and complex ores and products of their processing. Methods of zinc weight fraction measurement
GOST R 56859-2016 Copper and complex ores, and products of their processing. Methods of measurement of gold and silver weight fraction
GOST R 56857-2016 Copper and complex ores, and products of their processing. Methods of measurement of silicon dioxide weight fraction
GOST 29174-1991 Petroleum products and lubricants. Petroleum lubricating oils for turbines (categories ISO-L-TSA and ISO-L-TGA). Specifications
GOST ISO 7624-2013 Petroleum products and lubricants. Inhibited mineral turbine oils. Determination of oxidation stability

CZ-CSN, Ore grade

CSN 44 1826-1976 Manganese ores, concentrates and aglomerates Determination of total mangariese by potontiometric method
CSN 44 1627-1989 Lead - zinc ores. Potentiometric method of determination of arsenic
CSN ISO 6154:1993 Chromium ores. Preparation of samples
CSN 44 1797-1983 Iron ores, concentrates, aglomerates and pellets. Determination of arsenic. The photometric and potenciomotric methods
CSN 65 6075-1974 Petroleum products. Corrosireness to opper. Copper strip test
CSN 44 1810-1980 Iron ores, concentrates, aglomerates and pellets. Determination of vanadium content. Photometric, potenoiometric and atomic absorption methods
CSN 65 6214-1986 Petroleum produets. Neutralization number - potentiometric titration method
CSN 44 1787 Z1-1996
CSN 44 1803-1989 Iron ores, concentrates, agglomerates and pellets. Determination of total manganese by photometric method
CSN 65 6069-1977 Petroleum products Total base number Potentiometric perchloric acid titration method
CSN 44 1832-1983 Manganese ores, concentrates and aglomerates. Methods for evaluation of quality variation of chemical composition and size distribution
CSN 44 1816-1983 Iron ores, concentrates, aglomerates and pellets. Methods for evaluation of quality variation of chomical composition and size distribution
CSN 44 1812 Z1-1996
CSN 72 6070 Cast.4-1981 Refractories and products containing chrome and chrome ores. Coraplexometric determination of aluminium oxide content
CSN 72 6070 Cast.1-1981 Refractories and products containing chrome and chrome ores. General recommendations to methods of chemical analysis
CSN 72 6070 Cast.6-1981 Refractories and products containing chrome and chrome ores. Determination of chromic oxide content above 2 %

British Standards Institution (BSI), Ore grade

BS ISO 4298:2022 Manganese ores and concentrates. Determination of manganese content. Potentiometric method
21/30386347 DC BS ISO 4298. Manganese ores and concentrates. Determination of manganese content. Potentiometric method
PD ISO/TS 2597-4:2019 Iron ores. Determination of total iron content. Potentiometric titration method
BS ISO 3082:2009 Iron ores - Sampling and sample preparation procedures
BS ISO 3082:2017 Iron ores. Sampling and sample preparation procedures
BS ISO 15661:2020 Copper and nickel sulfide ores and concentrates. Determination of total chlorine content. Alkaline fusion and potentiometric titration method
BS 2000-223:1993 Methods of test for petroleum and its products - Determination of ash of petroleum products containing mineral matter
19/30320317 DC BS ISO 15661-1. Copper and nickel sulfide ores and concentrates. Determination of total chlorine content. Alkaline fusion and potentiometric titration method
BS 5660-2:2001 Methods of sampling iron ores - Sampling and sample preparation procedures
BS 2000-276:1995 Methods of test for petroleum and its products - Petroleum products - Determination of base number - Perchloric acid potentiometric titration method
BS ISO 6296:2000 Methods of test for petroleum and its products. Petroleum product. Determination of water. Potentiometric Karl Fischer titration method
BS ISO 4512:2001 Petroleum and liquid petroleum products. Equipment for measurement of liquid levels in storage tanks. Manual methods
BS ISO 4512:2000 Manual method of measuring liquid level in storage tanks for petroleum and liquid petroleum products
BS 2000-306:1994 Methods of test for petroleum and its products - Determination of oxidation stability of straight mineral oil
BS 2000-306:2002 Methods of test for petroleum and its products - Determination of oxidation stability of straight mineral oil
BS ISO 6296:2003 Methods of test for petroleum and its products - Petroleum product - Determination of water - Potentiometric Karl Fischer titration method
BS ISO 3771:2011 Petroleum products. Determination of base number. Perchloric acid potentiometric titration method
23/30461342 DC BS ISO 4266-2. Petroleum and liquid petroleum products. Measurement of level and temperature in storage tanks by automatic methods - Part 2. Measurement of level in marine vessels
BS ISO 4266-1:2023 Petroleum and liquid petroleum products. Measurement of level and temperature in storage tanks by automatic methods - Measurement of level in atmospheric tanks
BS 6870-2.1:1987 Analysis of aluminium ores. Chemical methods. Method of preparation of pre-dried test samples
22/30461339 DC BS ISO 4266-1. Petroleum and liquid petroleum products. Measurement of level and temperature in storage tanks by automatic methods - Part 1. Measurement of level in atmospheric tanks
BS EN 12634:1998 Petroleum products and lubricants. Determination of acid number. Non-aqueous potentiometric titration method
BS 2000-280:1999 Methods of test for petroleum and its products - Petroleum products and lubricants - Inhibited mineral turbine oils - Determination of oxidation stability
BS 2000-136.2:1999 Methods of test for petroleum and its products - Determination of saponification number - Potentiometric titration method - Section 136.2: Potentiometric titration method
BS 2000-136-2:1999 Methods of test for petroleum and its products. Determination of saponification number. Potentiometric titration method. Section 136.2: Potentiometric titration method
BS 2000-306:2011 Methods of test for petroleum and its products. Determination of oxidation stability of straight mineral oil
BS EN 14317-2:2007(2008) Thermal insulation products for buildings - In-situ thermal insulation formed from exfoliated vermiculite (EV) products - Specification for the installed products
BS 2000-272:2000 Methods of test for petroleum and its products - Determination of mercaptan sulfur and hydrogen sulfide content of liquefied petroleum gases (LPG) - Electrometric titration method
BS 2000-272:2002 Methods of test for petroleum and its products. Determination of mercaptan sulfur and hydrogen sulfide content of liquefied petroleum gases (LPG). Electrometric titration method
BS EN 14064-1:2018 Tracked Changes. Thermal insulation products for buildings. In-situ formed loose-fill mineral wool (MW) products. Specification for the loose-fill products before installation
BS ISO 17315:2014 Petroleum products and other liquids. Ethanol. Determination of total acidity by potentiometric titration
BS 7020-1:1989 Analysis of iron ores - Method for the preparation of pre-dried test samples for chemical analysis
BS 6870-2.2:1987 Analysis of aluminium ores. Chemical methods. Method for determination of hygroscopic moisture in analytical samples: gravimetric method

TR-TSE, Ore grade

TS 495-1974 IRON ORES - PREPARATION OF SAMPLES
TS 3496-1980 DETERMINATION OF SPECIFIC SURFACE AREA OF POWDERED ORE SAMPLES

Guizhou Provincial Standard of the People's Republic of China, Ore grade

DB52/T 1177-2017 Technical Regulations for Mineral Processing of Middle and Low Grade Collophosite

International Organization for Standardization (ISO), Ore grade

ISO 4298:1978 Manganese ores and concentrates — Determination of manganese content — Potentiometric method
ISO 4298:1984 Manganese ores and concentrates; Determination of manganese content; Potentiometric method
ISO 4298:2022 Manganese ores and concentrates — Determination of manganese content — Potentiometric method
ISO 6154:1989 Chromium ores; preparation of samples
ISO 6140:1991 Aluminium ores; preparation of samples
ISO 3083:1973 Title missing - Legacy paper document
ISO 3083:1986 Iron ores; Preparation of samples; Manual method
ISO 3082:1998 Iron ores - Sampling and sample preparation procedures
ISO 3082:2000 Iron ores - Sampling and sample preparation procedures
ISO 3082:2009 Iron ores - Sampling and sample preparation procedures
ISO 3082:2017 Iron ores - Sampling and sample preparation procedures
ISO/TS 2597-4:2019 Iron ores — Determination of total iron content — Part 4: Potentiometric titration method
ISO 2596:1973 Title missing - Legacy paper document
ISO 3082:1987 Iron ores; Increment sampling and sample preparation; Mechanical method
ISO 2596:1980 Iron ores — Determination of hygroscopic moisture in analytical samples
ISO 4263:1986 Petroleum products — Inhibited mineral oils — Determination of oxidation characteristics
ISO 6614:1994 Petroleum products - Determination of water separability of petroleum oils and synthetic fluids
ISO 6619:1988 Petroleum products and lubricants; neutralization number; potentiometric titration method
ISO/DIS 4266-2:2023 Petroleum and liquid petroleum products — Measurement of level and temperature in storage tanks by automatic methods — Part 2: Measurement of level in marine vessels
ISO/PRF 4266-2:2023 Petroleum and liquid petroleum products — Measurement of level and temperature in storage tanks by automatic methods — Part 2: Measurement of level in marine vessels
ISO 3082:2009/cor 1:2009 Iron ores - Sampling and sample preparation procedures; Technical Corrigendum 1
ISO 4512:2000 Petroleum and liquid petroleum products - Equipment for measurement of liquid levels in storage tanks - Manual methods
ISO 3771:2011 Petroleum products - Determination of base number - Perchloric acid potentiometric titration method
ISO 4266-1:2023 Petroleum and liquid petroleum products — Measurement of level and temperature in storage tanks by automatic methods — Part 1: Measurement of level in atmospheric tanks
ISO 3771:1977 Petroleum products; Total base number; Perchloric acid potentiometric titration method
ISO 3771:1994 Petroleum products - Determination of base number - Perchloric acid potentiometric titration method
ISO 6295:1983 Petroleum products; Mineral oils; Determination of interfacial tension of oil against water; Ring method
ISO/CD 18239-1:1976 Iron ores — Determination of loss on ignition — Part 1: Single micro sample TGA
ISO 6296:2000 Petroleum products - Determination of water - Potentiometric Karl Fischer titration method
ISO/CD 4266-3:2023 Petroleum and liquid petroleum products — Measurement of level and temperature in storage tanks by automatic methods — Part 3: Measurement of level in pressurized storage tanks (non-refrigerated)
ISO 310:1981 Manganese ores — Determination of hygroscopic moisture content in analytical samples — Gravimetric method
ISO 3085:2019 Iron ores — Experimental methods for checking the precision of sampling, sample preparation and measurement
ISO 3839:1996 Petroleum products - Determination of bromine number of distillates and aliphatic olefins - Electrometric method
ISO 4263-1:2003 Petroleum and related products - Determination of the ageing behaviour of inhibited oils and fluids; TOST test - Part 1: Procedure for mineral oils
ISO 17315:2014 Petroleum products and other liquids - Ethanol - Determination of total acidity by potentiometric titration
ISO/CD 4266-5:2023 Petroleum and liquid petroleum products — Measurement of level and temperature in storage tanks by automatic methods — Part 5: Measurement of temperature in marine vessels
ISO 3012:1999 Petroleum products - Determination of thiol (mercaptan) sulfur in light and middle distillate fuels - Potentiometric method

Japanese Industrial Standards Committee (JISC), Ore grade

JIS M 8704:2015 Iron ores -- Determination of the mass and quality characteristic of a lot
JIS M 8108:2008 Chromium, manganese and ferruginous manganese ores -- Sampling, sample preparation and determination of moisture content and size distribution
JIS M 8702:2009 Iron ores -- Sampling and sample preparation procedures
JIS M 8702:2016 Iron ores -- Sampling and sample preparation procedures
JIS M 8702:2019 Iron ores -- Sampling and sample preparation procedures
JIS M 8708:2021 Iron ores -- Experimental methods for checking the precision of sampling, sample preparation and measurement

Korean Agency for Technology and Standards (KATS), Ore grade

KS E ISO 6154:2003 Chromium ores-Preparation of samples
KS E 3037-2007 Iron ores－Preparation of samples－Manual method
KS E ISO 6154:2018 Chromium ores — Preparation of samples
KS E ISO 3082:2010 Iron ores－Sampling and sample preparation procedures
KS E 3037-2004 Iron ores－Preparation of samples－Manual method
KS E ISO 9033-2003(2019)
KS E ISO 4296-2:2018 Manganese ores — Sampling — Part 2: Preparation of samples
KS M 2119-2007 Petroleum distillates and commercial aliphatic olefins－Determination of bromine number－Electrometric method
KS M 2119-1985 Petroleum distillates and commercial aliphatic olefins－Determination of bromine number－Electrometric method
KS M ISO 2137:2003 Petroleum products-Lubricating grease and petrolatum-Determination of cone penetration
KS E ISO 8557-2003(2013) Aluminium ores－Determination of hydroscopic moisture in analytical samples－Gravimetric method
KS M 2008-2011(2016) Petroleum products — Inhibited mineral oils —Determination of oxidation characteristics
KS E 3047-2021 Garnierite nickel ores — Methods for sampling, sample preparation and determination of moisture content
KS E 3036-2004 Iron ores-Increment sampling and sample preparation-Mechanical method
KS M 2008-2011(2021) Petroleum products — Inhibited mineral oils —Determination of oxidation characteristics
KS M 2008-1986 Petroleum products — Inhibited mineral oils —Determination of oxidation characteristics
KS E ISO 10836:2003 Iron ores－Method of sampling and sample preparation for physical testing
KS M ISO 6295-2003(2018)
KS M ISO 4512:2003 Petroleum and liquid petroleum products－Equipment for measurement of liquid levels in storage tanks－Manual methods
KS M ISO 6619:2003 Petroleum products and lubricants-Neutralization number-Potentiometric titration method
KS M ISO 6619-2016(2021) Petroleum products and lubricants－Neutralization number－Potentiometric titration method
KS M ISO 6619:2016 Petroleum products and lubricants－Neutralization number－Potentiometric titration method
KS M ISO 4512-2003(2018)
KS M ISO 3771-2012(2017) Petroleum products－Determination of base number－Perchloric acid potentiometric titration method
KS M ISO 3771-2012(2022) Petroleum products－Determination of base number－Perchloric acid potentiometric titration method
KS B ISO 4512:2003 Petroleum and liquid petroleum products－Equipment formeasurement of liquid levels in storage tanks－Manual methods
KS B ISO 4512:2005 Petroleum and liquid petroleum products－Equipment formeasurement of liquid levels in storage tanks－Manual methods
KS M ISO 6293-2:2003 Petroleum products－Determination of saponification number－Part 2：Potentiometric titration method
KS M ISO 3771:2012 Petroleum products－Determination of base number－Perchloric acid potentiometric titration method
KS M ISO 2137:2016 Petroleum products and lubricants — Determination of conepenetration of lubricating greases and petrolatum
KS E ISO 8530-2003(2019)
KS M ISO 6293-2-2003(2018)
KS M ISO 6296-2003(2018)
KS M ISO 8216-1:2011 Petroleum products－Fuels(class F) classification－Part 1：Categories of marine fuels
KS M ISO 6296:2003 Petroleum products－Determination of water－Potentiometric Karl Fischer titration method
KS M 2008-2011 Petroleum products－Inhibited mineral oils－Determination of oxidation characteristics
KS E ISO 2596-2007(2017) Iron ores－Determination of hygroscopic moisture in analytical samples－Gravimetric and Karl Fischer methods
KS E ISO 310-2003(2019)
KS M ISO 4266-4-2003(2018)
KS E ISO 8541:2018 Manganese and chromium ores — Experimental methods for checking the bias of sampling and sample preparation
KS E ISO 11459:2003 Iron ores－Certified reference materials－Preparation and certification for use in chemical analysis
KS M ISO 6295:2003 Petroleum products－Mineral oils－Determination of interfacial tension of oil against water－Ring method
KS E ISO 2596-2007(2022) Iron ores－Determination of hygroscopic moisture in analytical samples－Gravimetric and Karl Fischer methods
KS M ISO 4263-1:2004 Petroleum and related products－Determination of the ageing behaviour of inhibited oils and fluids－TOST test－Part 1：Procedure for mineral oils
KS M ISO 3012:2003 Gasoline, kerosine and distillate fuels－Determination of mercaptan sulfur－Potentiometric method
KS M ISO 7624:2003 Petroleum products and lubricants-Inhibited mineral turbine oils-Determination of oxidation stability
KS M ISO 7624-2003(2018)

KR-KS, Ore grade

KS E ISO 6154-2018 Chromium ores — Preparation of samples
KS E ISO 4296-2-2018 Manganese ores — Sampling — Part 2: Preparation of samples
KS E ISO 4296-2-2018(2023) Manganese ores — Sampling — Part 2: Preparation of samples
KS E ISO 8541-2018(2023) Manganese and chromium ores — Experimental methods for checking the bias of sampling and sample preparation
KS M ISO 6295-2003(2023)
KS M ISO 4512-2003(2023)
KS M ISO 6619-2016 Petroleum products and lubricants－Neutralization number－Potentiometric titration method
KS B ISO 4512-2003 Petroleum and liquid petroleum products－Equipment formeasurement of liquid levels in storage tanks－Manual methods
KS M ISO 4266-2-2003(2023)
KS M ISO 2137-2016 Petroleum products and lubricants — Determination of conepenetration of lubricating greases and petrolatum
KS M ISO 6293-2-2003(2023)
KS E ISO 8541-2018 Manganese and chromium ores — Experimental methods for checking the bias of sampling and sample preparation
KS M ISO 6296-2003(2023)

Standard Association of Australia （SAA）, Ore grade

AS 2806.3:2001(R2013)
AS ISO 15661:2022 Copper and nickel sulfide ores and concentrates — Determination of total chlorine content — Alkaline fusion and potentiometric titration method

Association Francaise de Normalisation, Ore grade

NF T60-121:1976 DETERMINATION OF THE CONVENTIONAL MELTING POINT OF PETROLEUM JELLY,CRUDE PETROLEUM JELLY AND PETROLEUM WAX.
NF A06-102:1969 Chemical analysis of manganese ores. Potentiometric determination of manganese.
NF B10-601:2014 Quarry products - Natural stones - General prescriptions for use of natural stones
NF T60-121:2003 Petroleum products - Determination of the conventional melting point of petroleum waxes and petroleum jellies.
NF EN 14317-2:2007 Produits isolants thermiques pour le bâtiment - Produits d'isolation thermique à base de vermiculite exfoliée (EV) formés en place - Partie 2 : spécification des produits mis en place
NF ISO 6296:2001 Produits pétroliers - Dosage de l'eau - Méthode de titrage Karl Fischer par potentiométrie
NF B20-107:1986 Mineral fiber based insulating products - Mineral woolfelts - Extension test parallel to the surfaces of the products with displacement at constant velocity to determine the breaking stress
NF B10-503:1973 QUARRY PRODUCTS. LIMESTONES. MEASUREMENT OF POROSITY, OF THE TRUE WEIGHT PER UNIT VOLUME, AND OF THE APPARENT WEIGHT PER UNIT VOLUME.
NF T60-125*NF ISO 6614:2001 Petroleum products - Determination of water separability of petroleum oils and synthetic fluids
NF T60-132:2020 Petroleum products and lubricants - Determination of cone penetration of lubricating greases and petrolatum
NF T60-110-2*NF ISO 6293-2:2000 Petroleum products - Determination of saponification number - Part 2 : potentiometric titration method
NF A06-096:1959 Chemical analysis of manganese ores. Determination of moisture content (on laboratory samples).
NF ISO 6293-2:2000 Produits pétroliers - Détermination de l'indice de saponification - Partie 2 : méthode par titrage potentiométrique
NF M88-101:1985 Tank wagons. Transport of liquid hydrocarbons. Location and layout of equipment.
NF T60-150-1*NF EN ISO 4263-1:2005 Petroleum and related products - Determination of the ageing behaviour of inhibited oils and fluids - TOST test - Part 1 : procedure for mineral oils
NF P75-431-1*NF EN 14064-1:2018 Thermal insulation products for buildings - In-situ formed loose-fill mineral wool (MW) products - Part 1 : specification for the loose-fill products before installation
NF A24-003:1985 Chemical analysis of zinc ores concentrates. Accurate determination of zinc samples by X-ray fluorescence spectrometry on sample solution containing an internal standard.
NF EN 12634:1998 Produits pétroliers et lubrifiants - Détermination de l'indice d'acide - Méthode par titrage potentiométrique en milieu non aqueux.
NF T35-508-10*NF EN ISO 11126-10:2018 Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 10: almandite garnet

工业和信息化部, Ore grade

YB/T 4647-2018 Energy consumption quota per unit product of iron concentrate
YB/T 4646-2018 Energy consumption quota per unit product of iron pellets
YS/T 708-2020 Energy consumption limit per unit product of nickel concentrate
YS/T 1180-2017 Energy consumption limit per unit product of germanium concentrate
YS/T 693-2022 Copper concentrate unit product energy consumption limit
YS/T 709-2021 Energy consumption limit per unit product of tin concentrate
JC/T 2391-2017 Products used perthion gypsum slag cement concrete
YB/T 6060-2022 Metallurgical lime energy consumption limit per unit product

Professional Standard - Chemical Industry, Ore grade

HG/T 2957.2-2004 Alunite ore sampling and sample preparation method
HG/T 2956.2-2001 Ascharite ores - Methods of sampling and preparing sample
HG/T 2252-1991 The collection and preparation method of celestite ore samples

Group Standards of the People's Republic of China, Ore grade

T/CNIA 0153-2022 Energy consumption limit per unit product of lithium carbonate produced from low-grade lithium ores
T/CBMF 154-2021 The norm of energy consumption per unit products of graphite
T/CAB 0014-2017 Life Cycle Assessment Specification on Iron Ore Products
T/GXAS 485-2023 The norm of energy consumption per unit product of stainless steel produced from laterite nickel
T/CHNRISC 0002-2022 Oil fracturing proppant unit product energy consumption limit
T/HPAESRCU 0014-2022 Technical Specification for Green-design Product Assessment – Intelligent Ore Sorting System
T/CHNRISC 0001-2022 Energy consumption quota per unit product for zirconia high-temperature ceramic products and quartz nozzles

Taiwan Provincial Standard of the People's Republic of China, Ore grade

CNS 6939-1981 Quality Standard of Rock Dust Used in Coal Mines
CNS 14906-2005 Method of test for acid number of petroleum products by potentiometric titration

PL-PKN, Ore grade

PN C96132-1958 Petroleum products -- Grease for mining cars
PN C04049-1988 Petroleum products Determination of acid and basie number by potentiometric titration method
PN C04076-1955 Petroleum products -- Lubricating grease -- Determination of soaps, fats and mineral oil content
PN A75101-18-1990 Fruit and vegetable products Preparation of samples and testing methods Determination of minera? impurities content
PN H04156-03-1992 Chemical analysis of raw materials and products ol magnesite and dolomite Dctermination ol iron oxide content
PN H04156-02-1992 Chemical analysis of raw materials and products of magnesite and dolomite Determination of silicon dioxide content

Professional Standard - Ferrous Metallurgy, Ore grade

YB/T 4267-2011 Division of production grade for iron ores

Professional Standard - Geology, Ore grade

DZ/T 0184.4-1997 Rubidium strontium isotope geological age and strontium isotope ratio determination of rocks and minerals
DZ/T 0184.12-1997 Determination of trace lead isotope composition in rocks and minerals
DZ/T 0184.17-1997 Determination of Carbon and Oxygen Isotopic Composition in Carbonate Minerals or Rocks by the Phosphoric Acid Method
DZ/T 0130.9-2006 Geological and Mineral Laboratory Testing Good Practice Part 9: Identification of Rock and Mineral Samples
DZ/T 0184.5-1997 Rubidium and Strontium Isotope Geological Age Determination of Quartz Single Mineral and Its Hydrothermal Fluid Inclusions
DZ/T 0130.3-2006 Geology and Mineral Resources Laboratory Testing Quality Management Specification Part 3: Chemical Analysis and Composition Analysis of Rock and Mineral Samples
DZ/T 0130.8-2006 Geological and Mineral Laboratory Testing Good Practice Part 8: Isotope Geological Sample Analysis

American Society for Testing and Materials (ASTM), Ore grade

ASTM E945-96 Standard Test Method for Determination of Zinc in Zinc Ores and Concentrates by Complexometric Tritrimetry
ASTM E945-02a Standard Test Method for Determination of Zinc in Zinc Ores and Concentrates by Complexometric Tritrimetry
ASTM E945-02 Standard Test Method for Determination of Zinc in Zinc Ores and Concentrates by Complexometric Tritrimetry
ASTM E945-07 Standard Test Method for Determination of Zinc in Zinc Ores and Concentrates by Complexometric Titrimetry
ASTM E945-12 Standard Test Method for Determination of Zinc in Zinc Ores and Concentrates by EDTA Complexometric Titrimetry
ASTM D7200-06 Standard Practice for Sampling and Counting Airborne Fibers, Including Asbestos Fibers, in Mines and Quarries, by Phase Contrast Microscopy and Transmission Electron Microscopy
ASTM D664-06 Standard Test Method for Acid Number of Petroleum Products by Potentiometric Titration
ASTM D664-06ae1 Standard Test Method for Acid Number of Petroleum Products by Potentiometric Titration
ASTM D664-06a Standard Test Method for Acid Number of Petroleum Products by Potentiometric Titration
ASTM D664-95 Standard Test Method for Acid Number of Petroleum Products by Potentiometric Titration
ASTM D664-01 Standard Test Method for Acid Number of Petroleum Products by Potentiometric Titration
ASTM D664-95(2001)e1 Standard Test Method for Acid Number of Petroleum Products by Potentiometric Titration
ASTM D664-04e1 Standard Test Method for Acid Number of Petroleum Products by Potentiometric Titration
ASTM D664-04 Standard Test Method for Acid Number of Petroleum Products by Potentiometric Titration
ASTM D664-09a Standard Test Method for Acid Number of Petroleum Products by Potentiometric Titration
ASTM D664-11 Standard Test Method for Acid Number of Petroleum Products by Potentiometric Titration
ASTM E248-20 Standard Test Method for Determination of Manganese in Manganese Ores by Pyrophosphate Complexed Permanganate Potentiometric Titrimetry
ASTM D664-18 Standard Test Method for Acid Number of Petroleum Products by Potentiometric Titration
ASTM D664-07 Standard Test Method for Acid Number of Petroleum Products by Potentiometric Titration
ASTM D664-17 Standard Test Method for Acid Number of Petroleum Products by Potentiometric Titration
ASTM D664-11a Standard Test Method for Acid Number of Petroleum Products by Potentiometric Titration
ASTM D664-18e1 Standard Test Method for Acid Number of Petroleum Products by Potentiometric Titration
ASTM D664-11a(2017) Standard Test Method for Acid Number of Petroleum Products by Potentiometric Titration
ASTM D664-17a Standard Test Method for Acid Number of Petroleum Products by Potentiometric Titration
ASTM D2896-11 Standard Test Method for Base Number of Petroleum Products by Potentiometric Perchloric Acid Titration
ASTM D2896-07a Standard Test Method for Base Number of Petroleum Products by Potentiometric Perchloric Acid Titration
ASTM D2896-07 Standard Test Method for Base Number of Petroleum Products by Potentiometric Perchloric Acid Titration
ASTM D2896-98 Standard Test Method for Base Number of Petroleum Products by Potentiometric Perchloric Acid Titration
ASTM D2896-01e1 Standard Test Method for Base Number of Petroleum Products by Potentiometric Perchloric Acid Titration
ASTM D2896-01 Standard Test Method for Base Number of Petroleum Products by Potentiometric Perchloric Acid Titration
ASTM D2896-21 Standard Test Method for Base Number of Petroleum Products by Potentiometric Perchloric Acid Titration
ASTM D2896-15 Standard Test Method for Base Number of Petroleum Products by Potentiometric Perchloric Acid Titration
ASTM E248-07 Standard Test Method for Determination of Manganese in Manganese Ores by Pyrophosphate Complexed Permanganate Potentiometric Titrimetry
ASTM E314-16 Standard Test Methods for Determination of Manganese in Iron Ores by Pyrophosphate Potentiometry and Periodate Spectrophotometry Techniques
ASTM D2896-05 Standard Test Method for Base Number of Petroleum Products by Potentiometric Perchloric Acid Titration
ASTM D2896-06 Standard Test Method for Base Number of Petroleum Products by Potentiometric Perchloric Acid Titration
ASTM D2896-03 Standard Test Method for Base Number of Petroleum Products by Potentiometric Perchloric Acid Titration

Hebei Provincial Standard of the People's Republic of China, Ore grade

DB13/T 5124-2019 Guiding indicators of energy consumption quota per unit product of iron ore beneficiation
DB13/T 2128-2014 Metallurgical lime energy consumption limit per unit product

Shanghai Provincial Standard of the People's Republic of China, Ore grade

DB31/ 581-2012 The norm of energy consumption per unit products for ground granulated blast furnace slag
DB31/ 581-2019 Slag powder energy consumption limit per unit product
DB31 581-2012 Slag powder energy consumption limit per unit product
DB31/670-2012 Energy consumption quota per unit product of rock wool, slag wool and their products
DB31/ 670-2012 Energy consumption quota per unit product of rock wool, slag wool and their products
DB31/ 970-2016 The norm of energy consumption per unit product of artificial stones for buildings
DB31/ 736-2020 Energy consumption quota per unit product of plasterboard
DB31/ 736-2013 Energy consumption quota per unit product of plasterboard
DB31/T 1181-2019 Natural facing stone processing unit product energy consumption quota

Professional Standard - Non-ferrous Metal, Ore grade

YS/T 767-2012 Energy consumption quota in producing antimony concentrate
YS/T 945-2013 The norm of energy consumption per unit products of tantalum-niobium concentrates
YS/T 3002-2012 Specification of sample preparation for gold-bearing ore
YS/T 575.22-2006 Method for chemical analysis of bauxite ore-Gravimetric method for determination of wet storage in samples analyzed

Jiangsu Provincial Standard of the People's Republic of China, Ore grade

DB32/T 3148-2016 Slag powder energy consumption limit per unit product

Chongqing Provincial Standard of the People's Republic of China, Ore grade

DB50/ 855-2018 Energy consumption quota per unit product of mine salt
DB50/ 857-2018 Energy consumption quota per unit product of plasterboard

International Electrotechnical Commission (IEC), Ore grade

IEC 60600:1979 Equipment for minehead assay and sorting radioactive ores in containers

Professional Standard - Building Materials, Ore grade

JC/T 522-2013 The norm of energy consumption per unit product of rock/slag wool
JC/T 431-2012 Norm of energy consumption per unit product of cast stone
JC/T 2276-2014 The norm of energy consumption per unit product of gypsum plaster

Indonesia Standards, Ore grade

SNI 13-6339.6-2000 Terms of mineral and coal commodities - Part F: Precious stones

化学工业部, Ore grade

HG 2252-1991 Celestite mine sample selection and preparation methods

IN-BIS, Ore grade

YU-JUS, Ore grade

JUS B.H8.005-1988 Level measurementin storage and transport tanks forpetroleum and petroteum products
JUS L.C5.051-1987 Measuring ban for level measurement in transport and storage tanks for petroleum and petroleum products
JUS L.C5.050-1987 Measuring tape m'th accessories for level measurement fn transport and storage tanks for petroleum and petroleum products
JUS B.G8.055-1982 Methods of analysis of iron ore?. Experimentalmethods for evahiation of quality variation
JUS B.H8.059-1994 Petroleum products and lubricants - Inhibited mineral turbine oils - Determination of oxidation stability

Yunnan Provincial Standard of the People's Republic of China, Ore grade

DB53/T 675-2015 Control parameters of flotation process for middle and low grade collophosite

Shanxi Provincial Standard of the People's Republic of China, Ore grade

DB14/T 580-2010 Calcium carbide unit product comprehensive energy consumption limit
DB14/T 742-2013 Comprehensive energy consumption limit per unit product of magnetic separation iron ore concentrate powder
DB14/ 742-2013 Comprehensive energy consumption limit per unit product of magnetic separation iron ore concentrate powder
DB14/ 1062-2015 Comprehensive energy consumption limit per unit product of granulated blast furnace slag powder used in cement and concrete

Guangxi Provincial Standard of the People's Republic of China, Ore grade

DB45/T 2626-2023 Lime unit product energy consumption quota
DB45/T 2054-2019 Resin type artificial stone unit product energy consumption limit

Heilongjiang Provincial Standard of the People's Republic of China, Ore grade

DB23/T 3601-2023 Flake graphite unit product energy consumption limit
DB23/T 3053-2021 Specifications for Geological Exploration of Magmatic Type Low-grade Magnetite

Anhui Provincial Standard of the People's Republic of China, Ore grade

DB34/T 2087-2014 Petroleum and petroleum products acid value determination method potentiometric titration

国家市场监督管理总局、中国国家标准化管理委员会, Ore grade

GB 36891-2018 The norm of energy consumption per unit production of mullite
GB 21340-2019 The norm of energy consumption per unit products for glass products and cast stone
GB/T 21451.2-2019 Petroleum and liquid petroleum products—Measurement of level and temperature in storage tanks by automatic methods—Part 2:Measurement of level in marine vessels

German Institute for Standardization, Ore grade

DIN ISO 2137:1997 Petroleum products - Lubricating grease and petrolatum Determination of cone penetration (ISO 2137:1985)
DIN EN ISO 10058-3:2009-09 Chemical analysis of magnesite and dolomite refractory products (alternative to the X-ray fluorescence method) - Part 3: Flame atomic absorption spectrophotometry (FAAS) and inductively coupled plasma atomic emission spectrometry (ICP-AES) (ISO 10058-3...
DIN ISO 3771:1985 Petroleum products; total base number; perchloric acid potentiometric titration method
DIN EN 14064-2:2010-06 Thermal insulation products for buildings - In-situ formed loose-fill mineral wool (MW) products - Part 2: Specification for the installed products; German version EN 14064-2:2010
DIN 51441:2007-04 Testing of mineral products - Determination of the microbial colony number in petroleum products with a boiling range below 400 °C
DIN EN 12634:1999-02 Petroleum products and lubricants - Determination of acid number - Non-aqueous potentiometric titration method; German version EN 12634:1998
DIN EN 14064-1:2019-04 Thermal insulation products for buildings - In-situ formed loose-fill mineral wool (MW) products - Part 1: Specification for the loose-fill products before installation; German version EN 14064-1:2018
DIN EN 14064-1:2016 Thermal insulation products for buildings - In-situ formed loose-fill mineral wool (MW) products - Part 1: Specification for the loose-fill products before Installation; German and English version prEN 14064-1:2016
DIN EN 14064-1:2019 Thermal insulation products for buildings - In-situ formed loose-fill mineral wool (MW) products - Part 1: Specification for the loose-fill products before installation
DIN EN 12634:1999 Petroleum products and lubricants - Determination of acid number - Non-aqueous potentiometric titration method; German version EN 12634:1998
DIN EN 14317-2:2007-04 Thermal insulation products for buildings - In-situ thermal insulation formed from exfoliated vermiculite (EV) products - Part 2: Specification for the installed products; German version EN 14317-2:2007

Professional Standard - Machinery, Ore grade

JB/T 50031-1999 Quality classification of flameproof electric rock drills for mining

VN-TCVN, Ore grade

TCVN 3749-1983 Petroleum and petroleum products.Determination of chloride salts content by potentiometric method
TCVN 4775-1989 Ores and concentrates of non-ferrous metals.Sampling and preparation of samples for laboratory tests
TCVN 3167-2008 Petroleum products.Base number.Potentiometric pecloric acid titration method

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Ore grade

GB 33654-2017 The norm of energy consumption per unit throughput of gypsum plaster
GB/T 34332-2017 Chemical analysis of magnesite and dolomite refractory products
GB/T 21451.3-2017 Petroleum and liquid petroleum products—Measurement of level and temperture in storage tanks by automatic methods—Part 3:Measurement of level in pressurized tanks(non-refrigerated)

HU-MSZT, Ore grade

MSZ 11723/2.lap-1967

ES-UNE, Ore grade

UNE-EN ISO 10058-3:2008 Chemical analysis of magnesite and dolomite refractory products (alternative to the X-ray fluorescence method) - Part 3: Flame atomic absorption spectrophotometry (FAAS) and inductively coupled plasma atomic emission spectrometry (ICP-AES) (ISO 10058-3...
UNE 62424:2020 Compartmentalization «in situ» of buried metal tanks storing liquid petroleum products
UNE-EN 14064-1:2019 Thermal insulation products for buildings - In-situ formed loose-fill mineral wool (MW) products - Part 1: Specification for the loose-fill products before installation

Professional Standard - Commodity Inspection, Ore grade

SN/T 4306-2015 Determination of chromium oxide content in chromeore.Automatic potentiometric titration with microwave digestion method
SN/T 3593-2013 Determination of the volatile matter content in high-carbon graphite electrode broken and carbon additive

GOSTR, Ore grade

GOST 32462-2013 Liquid petroleum products. Potentiometric method for determination of mercaptan sulfur
GOST R 58954-2020 Copper and complex ores, and products of their processing. Methods for weight fraction measurement of zink in mineral forms

Fujian Provincial Standard of the People's Republic of China, Ore grade

DB35/T 1899-2020 Evaluation guide for energy consumption per unit product of laterite nickel ore stainless steel

SE-SIS, Ore grade

SIS SS-ISO 6619:1990 Petroleum products and lubricants — Neutralization number — Potentiometric titration method
SIS SS 15 51 57-1979 Petroleum products — Total base number Perchloric acid potentiometric titration method
SIS SS-ISO 6295:1987 Petroleum products - Mineral oils - Determination of interfacial tension of oil against water - Ring method

BE-NBN, Ore grade

NBN T 52-146-1983 Petroleum products - Minerai oils - Determination of interfacial tension of oil against water - Ring method
NBN T 52-503-1974 Petroleum products - Kinematic and dynamic viscosities - Definitions. Units. Comments. Conversion tables.

中华人民共和国卫生部、中国国家标准化管理委员会, Ore grade

GB/T 18068.3-2012 Health protection zone for non-metallic mineral products industry - Part 3：Asbestos products industry
GB/T 18068.4-2012 Health protection zone for non-metallic mineral products industry - Part 4：Graphite and charcoal industry
GB/T 18068.2-2012 Health protection zone for non-metallic mineral products industry - Part 2：Lime industry

Danish Standards Foundation, Ore grade

DS/ISO 3771:2011 Petroleum products - Determination of base number - Perchloric acid potentiometric titration method
DS/EN 14064-2:2010 Thermal insulation products for buildings - In-situ formed loose-fill mineral wool (MW) products - Part 2: Specification for the installed products
DS/EN 12634:2000 Petroleum products and lubricants - Determination of acid number - Non-aqueous potentiometric titration method
DS/EN 14064-1:2010 Thermal insulation products for buildings - In-situ formed loose-fill mineral wool (MW) products - Part 1: Specification for the loose-fill products before installation
DS/EN ISO 11126-10:2006 Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 10: Almandite garnet
DS/EN 14317-2:2007 Thermal insulation products for buildings - In-situ thermal insulation formed from exfoliated vermiculite (EV) products - Part 2: Specification for the installed products

Xinjiang Provincial Standard of the People's Republic of China, Ore grade

DB65/ 3661-2014 Calcium Calcium Calcium Polyvinyl Chloride Unit Product Energy Consumption Limit

Hunan Provincial Standard of the People's Republic of China, Ore grade

DB43/T 1989-2021 Lime unit product energy consumption limit and calculation method

Professional Standard - Petrochemical Industry, Ore grade

SH/T 0251-1993 Determination of Base Number of Petroleum Products (Perchloric Acid Potentiometric Titration Method)
SH/T 0688-2000 Petroleum products and lubricants.Determination of base number.Potentiometric titration method

中国石油化工总公司, Ore grade

SH/T 0251-1992 Determination of base number of petroleum products (perchloric acid potentiometric titration)

AENOR, Ore grade

UNE 22147:1990 IRON ORES. DETERMINATION OF HYGROSCOPIC MOISTURE IN ANALYTICAL SAMPLES. GRAVIMETRIC METHOD.
UNE-EN 14064-2:2014 Thermal insulation products for buildings - In-situ formed loose-fill mineral wool (MW) products - Part 2: Specification for the installed products
UNE-EN 12634:1999 Petroleum products and lubricants - Determination of acid number - Non-aqueous potentiometric titration method
UNE-EN 14064-1:2017 Thermal insulation products for buildings - In-situ formed loose-fill mineral wool (MW) products - Part 1: Specification for the loose-fill products before installation

TH-TISI, Ore grade

TIS 1817-1999 Petroleum products.determination of base number.perchloric acid potentiometric titration method

American National Standards Institute （ANSI), Ore grade

ANSI/ASTM D664:2009 Test Method for Acid Number of Petroleum Products by Potentiometric Titration

Professional Standard - Agriculture, Ore grade

SN/T 5499-2023 Determination of Talc Content in Mineral Products X-ray Diffraction Full Spectrum Fitting Method

Lithuanian Standards Office , Ore grade

LST EN 14064-2-2010 Thermal insulation products for buildings - In-situ formed loose-fill mineral wool (MW) products - Part 2: Specification for the installed products
LST EN 12634-2001 Petroleum products and lubricants - Determination of acid number - Non-aqueous potentiometric titration method
LST ISO 4266-1:2003 Petroleum and liquid petroleum products. Measurement of level and temperature in storage tanks by automatic methods. Part 1: Measurement of level in atmospheric tanks (idt ISO 4266-1:2002)
LST ISO 4266-2:2003 Petroleum and liquid petroleum products. Measurement of level and temperature in storage tanks by automatic methods. Part 2: Measurement of level in marine vessels (idt ISO 4266-2:2002)
LST EN 14064-1-2010 Thermal insulation products for buildings - In-situ formed loose-fill mineral wool (MW) products - Part 1: Specification for the loose-fill products before installation
LST ISO 4266-3:2003 Petroleum and liquid petroleum products. Measurement of level and temperature in storage tanks by automatic methods. Part 3: Measurement of level in pressurized storage tanks (non-refrigerated) (idt ISO 4266-3:2002)
LST EN 14317-2-2007 Thermal insulation products for buildings - In-situ thermal insulation formed from exfoliated vermiculite (EV) products - Part 2: Specification for the installed products

European Committee for Standardization (CEN), Ore grade

EN 12634:1998 Petroleum products and lubricants - Determination of acid number - Non-aqueous potentiometric titration method
EN 14317-2:2007 Thermal insulation products for buildings - In-situ thermal insulation formed from exfoliated vermiculite (EV) products - Part 2: Specification for the installed products

中华人民共和国国家卫生和计划生育委员会, Ore grade

GB 18068.3-2012 Health protection zone for non-metallic mineral products industry.Part 3:Asbestos products industry

PT-IPQ, Ore grade

NP ISO 3771:1999 Petroleum products Determination of base number. Perchloric acid potentiometric titration method

Tianjin Provincial Standard of the People's Republic of China, Ore grade

DB12/ 046.106-2011 Calculation method and limit of comprehensive energy consumption per unit output of products Part 106: Lime
DB12/ 046.48-2011 Calculation method and limit of comprehensive energy consumption per unit output of products Part 48: Gypsum board

Professional Standard - Electron, Ore grade

SJ/T 31490-1995 Comparable unit output energy consumption quota for piezoelectric quartz crystal manufacturing products