ZH
RU
ES
Antigen condition
Antigen condition, Total:499 items.
In the international standard classification, Antigen condition involves: Veterinary medicine, Non-ferrous metals, Wood, sawlogs and sawn timber, Farming and forestry, Cereals, pulses and derived products, Leather technology, Fibre optic communications, Animal feeding stuffs, Meat, meat products and other animal produce, Paper and board, Construction materials, Electrical engineering in general, Iron and steel products, Protection against crime, Coals, Tobacco, tobacco products and related equipment, Edible oils and fats. Oilseeds, Microbiology, Electrical accessories, Products of the textile industry, Textile fibres, Footwear, Equipment for the metallurgical industry, Fluid storage devices, Environmental testing, Wood-based panels, Mechanical testing, Elements of buildings, Equipment for the chemical industry, Lifting equipment, Internal combustion engines, Rotating machinery, Earth-moving machinery, Telecommunications in general, Industrial trucks, Food products in general, Optics and optical measurements, ENERGY AND HEAT TRANSFER ENGINEERING, Power transmission and distribution networks, Protection of and in buildings, Kitchen equipment, Rubber, Pipeline components and pipelines, Integrated circuits. Microelectronics, Road engineering, Surface treatment and coating, Solar energy engineering, Metalliferous minerals, Non-textile floor coverings, Pulps, Equipment for petroleum and natural gas industries, Corrosion of metals, Raw materials for rubber and plastics, Spices and condiments. Food additives, Galvanic cells and batteries, Rectifiers. Convertors. Stabilized power supply, Transformers. Reactors, Non-metalliferous minerals, Welding, brazing and soldering, Telecommunication systems, Installations in buildings, Document imaging applications, Protection against fire, Glass, Agricultural machines, implements and equipment, Rubber and plastics products, Plastics, Company organization and management, Non-destructive testing, Pumps, Nuclear energy engineering, Power stations in general, Materials for aerospace construction, Electromagnetic compatibility (EMC), Testing of metals, Technical drawings, Medical sciences and health care facilities in general, Petroleum, petroleum products and natural gas handling equipment, Electric traction equipment, Reinforced plastics, Chipless working equipment, Electronic components in general, Electronic component assemblies, Telecommunication terminal equipment, Mining equipment, Paints and varnishes, Protective equipment, Telecontrol. Telemetering, Lubricants, industrial oils and related products, Bearings, Woodworking equipment, Quality, Structures of buildings, Linear and angular measurements, Environmental protection, Products of the chemical industry, Inorganic chemicals, Refractories, Adhesives, Acoustics and acoustic measurements, Machine tools, Freight distribution of goods, Aircraft and space vehicles in general, Laboratory medicine, Machine tool systems, Farm buildings, structures and installations, Insulating materials, Insulation, Electrical equipment for working in special conditions, Software development and system documentation, Information technology (IT) in general, Valves, External water conveyance systems, Fasteners.
RU-GOST R, Antigen condition
- GOST 29312-1992 Antibodies and antigens for laboratory diagnosis of foot-and-mouth disease. Specifications
- GOST 804-1993 Primary magnesium ingots. Specifications
- GOST 804-1972 Primary magnesium ingots. Specification
- GOST 22296-1989 Pulpwood for export. Specifications
- GOST 21946-1976 Raw hop. Specifications
- GOST 28425-1990 Raw hides and skins. Specifications
- GOST 18253-1972 Horn-and-hoof material
- GOST 6749-2005 Paper-base for wallpaper. Specifications
- GOST 22384-1977 Raw bristle. Specifications
- GOST 6749-1981 Base paper for wallpaper
- GOST 6749-1986 Base papers for wall-paper. Specifications
- GOST 21438-1995 Zinc antifriction alloys in pigs. Specifications
- GOST 22266-1994 Sulphate-resistant cements. Specifications
- GOST 21438-1975 Zinc antifriction alloys in pigs
- GOST 20919-1975 Canned small crab in natural juice. Specifications
- GOST 28589-1990 Canned meat "Poultry meat in its own juice". Specifications
- GOST 7129-1979 Raw uncured makhorka (kind of shag). Specification
- GOST 4106-1974 Wood for producing tanning extracts. Specifications
- GOST 10582-1976 Oil flax-seed. Industrial raw material. Specifications
- GOST 23551-1979 Wooden raw materials for manufacturing modified wood. Specifications
- GOST 23636-1990 Fermentative preparation protosubtilin G3x. Specifications
- GOST 23650-1979 Tobacco-fermented material, supplied for export. Specifications
- GOST 22618-1977 Secondary raw material of felt items. Specifications
- GOST 22391-1989 Sunflower. Requirements for state purchases and deliveries
- GOST 23827-1979 Thin wood raw material. Specifications
- GOST 382-1991 Raw hides and skins sorted for industrial use. Specifications
- GOST 10590-1975 Sorted secondary raw material of blended fibres. Specifications
- GOST 24260-1980 Wood raw material for pirolysis and charring. Specifications
- GOST 29105.1-1991 Original microplants made from meristems. Specifications
- GOST 25246-1982 Chemically resistant concretes. Specifications
- GOST 26362-1984 Foot-gear. Method for determination of water resistance in dynamic conditions
- GOST 5283-1991 Canned meat "Boiled beef in its own juice". Specifications
- GOST 28333-1989 Vaccine against erysipelas from VR-2. Specifications
- GOST 13589-1983 Raw leather materials. Skins of the far-east pinnated. Specifications
- GOST 12251-1977 Rubber. Method for the determination of abrasion resistance under rolling with slipping
- GOST 11549-1976 Flax-fibre seed. Industrial raw material. Specifications
- GOST 26604-1985 Non-woven textile sheets (backing) of fibres for thermal-sound-insulating linoleum. Specifications
- GOST 17267-1971 Poplar cuttings for forest-steppe and steppe zones
- GOST 8407-1989 Reused rubber raw materials. Tyres and inner-tubes. Specifications
- GOST 24881-1981 Cummin. Industrial raw material. Specifications
- GOST 26527-1985 Mercury-zinc cells and batteries. General specification
- GOST 23050-1978 Biological preparations. Virusvaccinia VGNKI dry cultural against Aujeszky disease. Specifications
- GOST 18254-1972 Coloured antigen for diagnostics of pullorumbird typhus
- GOST 24030-1980 Corrosion-resistant steel seamless tubes for power engineering industry. Specifications
- GOST 10134.1-1982 Glass inorganic and glass-crystal materials. Method for determination of water-resisting property at 98 °C
- GOST 24464-1980 Feed pumps for nuclear power plant. General technical requirements
- GOST R 50027-1992 Rubber and plastics hoses. Assessment of ozone resistance under static conditions
- GOST 11231-1977 Undressed hide of mountain and plain marten. Specifications
- GOST 24465-1980 Condensate pumps for nuclear power plant. General technical requirements
- GOST 33845-2016 Polymer composites. Test method for fatigue properties under cyclic loading conditions
- GOST 9.053-1975 Unified system of corrosion and ageing protection. Non-metallic materials and articles with their application. Method of microbiological resistance tests under natural and atmospherie conditions
- GOST 23409.8-1978 Moulding and core sand mixtures. Method for determination of compressive strength limit at high temperatures
- GOST 25467-1982 Articles of electronics. Application conditions. Classification and requirements for resistance to environmental factors influence
- GOST 27145-1986 Antigene and antiserum for diagnosis of equine infections. Technical requirements and test methods
- GOST 29267-1991 Seed potatoes. Normalized initial material. Acceptance rules and methods of analysis
- GOST 10543-1998 Steel surfacing wire. Specifications
- GOST 10543-1982 Surfacing steal wire. Specifications
- GOST R 57434-2017 Primary aluminum and alloys based on it. Product form and delivery conditions. Marking, packing, transportation and storage
- GOST 29105.3-1991 Adapted rooted miroscions. Specifications
- GOST 30136-1994 Carbon steel wire rods of common quality. Specifications
- GOST 30136-1995 Carbon steel wire rods of common quality. Specifications
Professional Standard - Petroleum, Antigen condition
- SY/T 7513-1988 Technical Conditions of Mined Crude Oil
- SY 7513-1988 88 Technical Conditions of Mined Crude Oil
- SY/T 5280-2000 General technical conditions for crude oil demulsifiers
- SY/T 5280-2018 General technical specification for crude oil demulsifier
- SY/T 5654-1993 Technical conditions of oil and synthetic fluid anti-emulsification performance tester
- SY/T 5767-2005 Technical specification for practice of transporting curde oil treated with pour point depressants through pipeline
German Institute for Standardization, Antigen condition
- DIN 58142:2006 Testing of fibre optic elements - Determination of the resistance against environmental conditions
- DIN 4074-2:1958 Building Timber for Wood Building Components; Quality Conditions for Building Logs (Softwood)
- DIN EN 13121-1:2003 GRP tanks and vessels for use above ground - Part 1: Raw materials; Specification conditions and acceptance conditions; German version EN 13121-1:2003
- DIN 53509-1:2001 Testing of rubber - Determination of resistance to ozone cracking - Part 1: Static conditions
- DIN 58987:2010-03 Haemostaseology - Reference method for the VWF antigen; Text in German and English
- DIN EN ISO 15156-1:2010 Petroleum and natural gas industries - Materials for use in H<(Index)2>S-containing environments in oil and gas production - Part 1: General principles for selection of cracking-resistant materials (ISO 15156-1:2009); German version EN ISO 15156-1:2009
- DIN EN ISO 15156-1:2015 Petroleum and natural gas industries - Materials for use in H2S-containing environments in oil and gas production - Part 1: General principles for selection of cracking-resistant materials; (ISO 15156-1:2015) German version EN ISO 15156-1:2015
- DIN EN 321:2002 Wood-based panels - Determination of moisture resistance under cyclic test conditions; German version EN 321:2001
- DIN 58987:2023 Haemostaseology - Reference method for the Von Willebrand Factor antigen; Text in German and English
- DIN EN ISO 14744-1:2008-09 Welding - Acceptance inspection of electron beam welding machines - Part 1: Principles and acceptance conditions (ISO 14744-1:2008); German version EN ISO 14744-1:2008
- DIN EN 300019-1-3:2004 Equipment Engineering (EE) - Environmental conditions and environmental tests for telecommunications equipment - Part 1-3: Classification of environmental conditions; Stationary use at weatherprotected locations (Endorsement of the English version EN 3000
- DIN EN 300019-1-3:2016 Environmental Engineering (EE) - Environmental conditions and environmental tests for telecommunications equipment - Part 1-3: Classification of environmental conditions; Stationary use at weatherprotected locations (Endorsement of the English version EN
- DIN EN 62132-1 Berichtigung 1:2007 Integrated circuits - Measurement of electromagnetic immunity, 150 kHz to 1 GHz - Part 1: General conditions and definitions (IEC 62132-1:2006); German version EN 62132-1:2006, Corrigenda to DIN EN 62132-1:2006-06; CENELEC-Corrigendum November 2006 to EN
- DIN EN ISO 14744-1:2008 Welding - Acceptance inspection of electron beam welding machines - Part 1: Principles and acceptance conditions (ISO 14744-1:2008); German version EN ISO 14744-1:2008
- DIN EN 13121-1:2021 GRP tanks and vessels for use above ground - Part 1: Raw materials - Specification conditions and acceptance criteria; German version EN 13121-1:2021
- DIN EN ISO 294-1:1998 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 1: General principles, and moulding of multipurpose and bar test specimens (ISO 294-1:1996); German version EN ISO 294-1:1998
- DIN EN 300019-1-4:2004 Equipment Engineering (EE) - Environmental conditions and environmental tests for telecommunications equipment - Part 1-4: Classification of environmental conditions; Stationary use at non-weatherprotected locations (Endorsement of the English version EN
- DIN EN 300019-1-4:2016 Environmental Engineering (EE) - Environmental conditions and environmental tests for telecommunications equipment - Part 1-4: Classification of environmental conditions; Stationary use at non-weatherprotected locations (Endorsement of the English version
- DIN EN ISO 20623:2018-04 Petroleum and related products - Determination of the extreme-pressure and anti-wear properties of lubricants - Four-ball method (European conditions) (ISO 20623:2017); German version EN ISO 20623:2018
- DIN ISO 10129:2018 Plain bearings - Testing of bearing metals - Resistance to corrosion by lubricants under static conditions (ISO 10129:2017); Text in German and English
- DIN 50148:1975 Tensile test pieces for non-ferrous metals pressure die castings
- DIN 58940-4 Bb.1:2010 Medical microbiology - Susceptibility testing of pathogens to antimicrobial agents - Part 4: Evaluation classes of the minimum inhibitory concentration; Supplement 1: MIC-breakpoints of antibacterial agents
- DIN EN 13121-1:2019 GRP tanks and vessels for use above ground - Part 1: Raw materials - Specification conditions and acceptance criteria; German and English version prEN 13121-1:2019
- DIN EN 13121-1:2021-11 GRP tanks and vessels for use above ground - Part 1: Raw materials - Specification conditions and acceptance criteria; German version EN 13121-1:2021
- DIN 58987:2023-04 Haemostaseology - Reference method for the Von Willebrand Factor antigen; Text in German and English / Note: Date of issue 2023-03-03*Intended as replacement for DIN 58987 (2010-03).
- DIN ISO 10129:2019 Plain bearings - Testing of bearing metals - Resistance to corrosion by lubricants under static conditions (ISO 10129:2017)
- DIN EN ISO 527-3:2003 Plastics - Determination of tensile properties - Part 3: Test conditions for films and sheets (ISO 527-3:1995 + Corr 1:1998 + Corr 2:2001) (includes Corrigendum AC:1998 + AC:2002); German version EN ISO 527-3:1995 + AC:1998 + AC:2002
TR-TSE, Antigen condition
- TS 3286-1979 Flexuial Strength Of Concrete Under Field Conditions
- TS 3587-1981 DETERMINATION OF THE RESISTANCE OF GLASS TO ATTACK BY 6N HYDROCHLORIC ACID AT 100°C
- TS 2680-1977 VULCANIZED RUBBERS - DETERMINATION OF RESISTANCE TO OZONE CRACKING UNDER STATIC CONDITIONS
- TS 3259-1979 Fabrics Coated With Rubber Or Plastics - Determination Of Resistance To Ozone Cracking Under Sta?ic Conditions
Professional Standard - Business, Antigen condition
Professional Standard - Aerospace, Antigen condition
- QJ 199-1980 Specifications for Shear Resistant Ring Groove Rivets
- QJ 526-1983 Specifications for shear seal ring groove rivets
- QJ 1723-1989 Specifications for Upset Riveting Tension Ring Groove Rivets
- QJ 528-1985 Specifications for pull-rivet type pull-ring groove rivets
- QJ 1223-1987 Specifications for upset riveting shear ring groove rivets
- QJ 2327-1992 General technical specifications for anti-nuclear hardened electrical connectors
- QJ 2502-1993 General specification for radiation hardened semiconductor discrete devices
- QJ 2501-1993 General technical specifications for radiation-resistant hardened and sealed electromagnetic relays
- QJ 2707-1995 Technical conditions for computer-aided design of printed circuit boards
Professional Standard - Machinery, Antigen condition
- JB/T 7573-1994 General technical specifications for electrotechnical products intended to be intended to be used in plateau conditions
- JB 2678-1980 Environmental conditions for the use of electrical products in high altitudes
- JB/T 6866-2010 Specification for digital display ceramics tiles flexure testing machines
- JB/T 6866-1993 Technical conditions of digital display ceramic flexural testing machine
- JB/T 5931.2-1991 Wheel loaders for plateau Technical conditions
- JB/T 6039.1-1992 Crawler bulldozers for plateau Technical conditions
- JB/T 10458-2004 Specification of anti-oxidizing coating at high-temperature for machineries
- JB/T 12569.2-2015 Log bilateral multi-blade saw machine of woodworking.Part 2: Technology conditions
- JB/T 11939-2014 The technical conditions and test evaluation method for crude oil water analytical instrument by RF
- JB/T 12539-2015 Technical condition for operation of flue gas selective non-catalytic reduction denitration system
- JB/T 11880.1-2014 Diesel engines.Selective catalytic reduction (SCR) systems.Part 1: General requirements
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Antigen condition
- GB/T 3180-1982 Specification for medium manganese wear-resistant spheroidal iron castings
- GB/T 35064-2018 Specification of feedstocks for coal-oil co-processing
- GB/T 23810-2009 Specification of coal for direct liquefaction
- GB/T 21426-2008 Special environmental condition.Requirements for electric powerplant with internal combustion engines on plateau
- GB/T 20969.2-2007 Special environmental condition Machinery for plateau Part 2: Requirements for construction machinery on plateau
- GB/T 12498-1990 Generic specification of rubidium frequency standards
- GB 12498-1990 Rubidium Atomic Frequency Standard General Specifications
- GB/T 29722-2013 Specifications of coal for entrained-flow gasifier
- GB/T 29721-2013 Specifications of coal for fluidized bed gasifier
- GB/T 20635-2006 Special environment condition-Technical requirements of high-voltage apparatuses for plateau
- GB/T 19608.3-2004 Classification of special environmental condition Part 3:Plateau
- GB/T 20969.1-2007 Special environmental condition Machinery for plateau Part 1: Requirements for internal combustion engines on plateau
- GB/T 5009.159-2003 Determination of reductive--form ascorbic acid in foods
- GB/T 25073-2010 Micrographics-Colour microfilm-Application of the exposure technique to prepare line oriiginals and continuous-tone originals
- GB/T 20645-2006 Specific environmental condition-Technical requirements of low-voltage apparatuses for plateau
- GB/T 20969.3-2007 Special environmental condition Machinery for plateau Part 3: The specification of select type and acceptance check for construction machinery on plateau
- GB/T 20969.5-2008 Special environmental condition.Machinery for plateau.Part 5:Guide rule of test for plateau natural environment.Construction machinery
- GB/T 30808-2014 Thermal insulation products for buildings.Determination of retention rate on tensile strength perpendicular to the faces in hygrothermal conditions
- GB/T 5080.1-2012 Reliability testing.Part 1:Test conditions and statistical test principles
- GB/T 20969.4-2008 Special environmental condition.Machinery for plateau.Part 4:Guide rule of test for plateau natural environment.Internal combustion engines
- GB/T 42968.1-2023 Measurements of electromagnetic immunity of integrated circuits Part 1: General conditions and definitions
- GB/T 1835-1995 The specification of corner fittings for freight conters
- GB/T 42613-2023 Plain bearings—Testing of bearing materials—Resistance to corrosion by lubricants under static conditions
- GB/T 14201-2018 Iron ore pellets for blast furnace and direct reduction feedstocks.Determination of the crushing strength
- GB 8454-1987 Determination of ferrous iron content in reduced ilmenite powder for welding rod
- GB/T 8454-1987 Determination of ferrous iron content in reduced ilmenite powder for welding rod
Professional Standard - Public Safety Standards, Antigen condition
SE-SIS, Antigen condition
- SIS 11 21 19 E-1963 Dragprovstavar typ J
- SIS SS 06 10 41-1986 Welding electrodes — Covered electrodes for manual metal-arc welding of creep-resisting low alloyed steel — Weld meta/ test pieces
- SIS SS IEC 587:1987 Insulating materials - Test methods for evaluating resistance to tracking and erosion of electrical insulating materials used under severe ambient conditions
- SIS SS-ISO 8580:1990 Rubber and plastics hoses — Determinationof ultra-violet resistance under static condi- tions
- SIS MNC 974-1986 Welding electrodes - Covered electrodes for manual metal-arc welding of creep resisting low alloyed steel
- SIS MNC 974 E-1986 Welding electrodes - Covered electrodes for manual metal-arc welding of creep resisting low alloyed steel - Summary
- SIS SS 11 21 21-1979 Tensile test pieces type L
Professional Standard - Hydroelectric Power, Antigen condition
- SD 279-1988 Technical specifications for static impedance relay
Professional Standard - Light Industry, Antigen condition
- QB/T 2881-2013 Footwear and footwear components.Antimicrobial performance specifications
- QB/T 2881-2007 Antimicrobial technical requirements for footwear linings and insoles
Fujian Provincial Standard of the People's Republic of China, Antigen condition
- DB35/T 1058-2019 General technical requirements for antibacterial polyester filament
- DB35/T 1048-2019 General technical specification for knitted spacer fabrics for antibacterial shoes
- DB35/T 1760-2018 Preparation of H7 Subtype Avian Influenza Antigen Colloidal Gold Immunochromatographic Detection Test Strip and Technical Regulations for Rapid Detection in Live Birds
Professional Standard - Ferrous Metallurgy, Antigen condition
- YB/T 3226-1988 Technical conditions for high chromium wear-resistant cast iron liners
工业和信息化部, Antigen condition
- YB/T 3226-2021 High chromium anti-wear cast iron lining technical conditions
- JB/T 13809-2020 General technical conditions for in-situ testing instruments for mechanical properties of solid materials
RO-ASRO, Antigen condition
- STAS R 9449-1974 VULCANIZED RUBBER Determination of ozone cracking resistance under static conditions
- STAS SR 13297-1995 Cookingware Technical and safety conditions for fixing elements and for their assembling
- STAS 9051/9-1986 FABRICS COATED WITH RUBBER OR PLASTICS Determination of resistance to ozone cracking under static conditions
- STAS 4740-1989 Board and paperboard BENDING RESISTANCE DETERMI- NATION OF LOAD AND BENDING ANGLE
IET - Institution of Engineering and Technology, Antigen condition
Professional Standard - Aviation, Antigen condition
- HB 6990-1994 Specifications for clamps with high tear-resistant fluorosilicone rubber pads
VN-TCVN, Antigen condition
- TCVN 6521-1999 Structural steels with improved atmospheric corrosion resistance
- TCVN 1769-1975 Metallic raw recuperation.Safety requirements against explosion under treatment
HU-MSZT, Antigen condition
European Committee for Standardization (CEN), Antigen condition
- EN 13121-1:2003 GRP tanks and vessels for use above ground - Part 1: Raw materials; Specification conditions and acceptance conditions
- EN 13121-1:2021 GRP tanks and vessels for use above ground - Part 1: Raw materials - Specification conditions and acceptance criteria
- EN 321:2001 Wood-based panels - Determination of moisture resistance under cyclic test conditions
- EN ISO 128-2:2022 Technical product documentation (TPD) - General principles of representation - Part 2: Basic conventions for lines (ISO 128-2:2022)
- EN ISO 14744-1:2000 Welding - Acceptance Inspection of Electron Beam Welding Machines - Part 1: Principles and Acceptance Conditions ISO 14744-1:2000
- EN ISO 14744-1:2008 Welding - Acceptance inspection of electron beam welding machines - Part 1: Principles and acceptance conditions
- EN ISO 294-1:2017 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 1: General principles@ and moulding of multipurpose and bar test specimens
- EN 12697-45:2012 Bituminous mixtures - Test methods for hot mix asphalt - Part 45: Saturation Ageing Tensile Stiffness (SATS) conditioning test
- EN 14493:2002 Structural adhesives Determination of dynamic resistance to cleavage of high strength adhesive bonds under impact conditions Wedge impact method ISO 11343:1993 modified
ZA-SANS, Antigen condition
- SANS 53121-1:2009 GRP tanks and vessels for use above ground Part 1: Raw materials - Specification conditions and acceptance conditions
- SANS 5868:1976 Conditioning of vulcanized rubbers
CH-SNV, Antigen condition
Professional Standard - Education, Antigen condition
- JY 241-1987 Technical Conditions of Slicing in Early Gastrula Stage of Frog
- JY 87-1982 Technical conditions for sectioning of frog gastrula stage (Trial)
- JY 99-1982 Motor Nerve Original Film Technical Conditions (Trial)
- JY 0313-1991 Specification for fossil Arechaeopteryx and its restoration model
American Society for Testing and Materials (ASTM), Antigen condition
- ASTM E2149-13a Standard Test Method for Determining the Antimicrobial Activity of Antimicrobial Agents Under Dynamic Contact Conditions
- ASTM E2149-10 Standard Test Method for Determining the Antimicrobial Activity of Immobilized Antimicrobial Agents Under Dynamic Contact Conditions
- ASTM E2149-01 Standard Test Method for Determining the Antimicrobial Activity of Immobilized Antimicrobial Agents Under Dynamic Contact Conditions
- ASTM E2149-20 Standard Test Method for Determining the Antimicrobial Activity of Antimicrobial Agents Under Dynamic Contact Conditions
- ASTM E2149-13 Standard Test Method for Determining the Antimicrobial Activity of Immobilized Antimicrobial Agents Under Dynamic Contact Conditions
- ASTM C1681-18 Standard Test Method for Evaluating the Tear Resistance of a Sealant Under Constant Strain
- ASTM C1681-14 Standard Test Method for Evaluating the Tear Resistance of a Sealant Under Constant Strain
- ASTM E2472-12(2018) Standard Test Method for Determination of Resistance to Stable Crack Extension under Low-Constraint Conditions
- ASTM E2472-12(2018)e1 Standard Test Method for Determination of Resistance to Stable Crack Extension under Low-Constraint Conditions
- ASTM E2472-12 Standard Test Method for Determination of Resistance to Stable Crack Extension under Low-Constraint Conditions
- ASTM E2472-06e1 Standard Test Method for Determination of Resistance to Stable Crack Extension under Low-Constraint Conditions
- ASTM E2472-12e1 Standard Test Method for Determination of Resistance to Stable Crack Extension under Low-Constraint Conditions
- ASTM D5588-97(2017) Standard Test Method for Determination of the Microbial Condition of Paint, Paint Raw Materials, and Plant Areas
- ASTM F1383-11 Standard Test Method for Permeation of Liquids and Gases through Protective Clothing Materials under Conditions of Intermittent Contact
- ASTM F1383-12 Standard Test Method for Permeation of Liquids and Gases through Protective Clothing Materials under Conditions of Intermittent Contact
- ASTM F1383-12e1 Standard Test Method for Permeation of Liquids and Gases through Protective Clothing Materials under Conditions of Intermittent Contact
- ASTM F739-12e1 Standard Test Method for Permeation of Liquids and Gases through Protective Clothing Materials under Conditions of Continuous Contact
- ASTM D7247-16 Standard Test Method for Evaluating the Shear Strength of Adhesive Bonds in Laminated Wood Products at Elevated Temperatures
- ASTM F739-12 Standard Test Method for Permeation of Liquids and Gases through Protective Clothing Materials under Conditions of Continuous Contact
- ASTM E3162-18 Standard Practice Measuring the Durability of Antibacterial Agents Applied to Textiles under Simulated Home Laundering Conditions
CZ-CSN, Antigen condition
- CSN 34 5614-1970 Test methods for testing of resistance of electrical apparatus to humid conditions
- CSN 77 0161-1987 Principles for use of packaging adhesives under extrém climatic conditions
- CSN 91 0210 Cast.2-1979 Testlng of fumlture surface coatlng The resistance of the coat to the changes o? climatlc conditions
- CSN 80 0524-1977 Determination of fineness of individual fibrils in the fibrillated tapes of polymer films
- CSN 03 8110-1978 Testing of atmospheric corrosion resistance in functional conditiona and on atmospheric test stations
- CSN 34 6468 Z1-2000
- CSN 35 8031-1977 Climatic category of components for electronic equipment
ES-AENOR, Antigen condition
- UNE 53-558 Pt.1-1985
- UNE 58-101 Pt.1-1992 Heavy lifting equipment. Strenght and safety conditions for dismountable tower cranes for building works. Part 1: Design and manufacturing conditions
- UNE 58-101 Pt.2-1992 Heavy lifting equipment. Strenght and safety conditions for dismountable tower cranes for building works. Part 2: Installations and utilization conditions
- UNE 58-101 Pt.3-1992 Heavy lifting equipment. Strenght and safety conditions for dismountable tower cranes for building works. Part 3: Documentation
- UNE 58-101 Pt.4-1992 Heavy lifting equipment. Strenght and safety conditions for dismountable tower cranes for building works. Part 4: Useful life
British Standards Institution (BSI), Antigen condition
- BS EN 321:2002 Wood-based panels - Determination of moisture resistance under cyclic test conditions
- BS EN 13121-1:2003 GRP tanks and vessels for use above ground. Raw materials. Specification conditions and acceptance conditions
- BS EN 62132-1:2016 Integrated circuits. Measurement of electromagnetic immunity. General conditions and definitions
- BS ISO 15361:2001 Pulps. Determination of zero-span tensile strength, wet or dry
- BS EN ISO 14744-1:2008 Welding - Acceptance inspection of electron beam welding machines - Principles and acceptance conditions
- BS ISO 3011:1997 Rubber- or plastics-coated fabrics - Determination of resistance to ozone cracking under static conditions
- BS ISO 15003:2019 Agricultural engineering. Electrical and electronic equipment. Testing resistance to environmental conditions
- BS EN 62132-1:2006 Integrated circuits - Measurement of electromagnetic immunity, 150 kHz to 1 GHz - General conditions and definitions
- BS 7691:1994 Methods for testing resistance to environmental conditions of electronic equipment used in agriculture and horticulture
- BS EN ISO 527-3:1996 Plastics - Determination of tensile properties - Test conditions for films and sheets
- BS ISO 6565:2011 Tobacco and tobacco products. Draw resistance of cigarettes and pressure drop of filter rods. Standard conditions and measurement
- BS EN 845-1:2013 Specification for ancillary components for masonry. Wall ties, tension straps, hangers and brackets
- BS EN 12697-45:2012 Bituminous mixtures. Test methods for hot mix asphalt. Saturation Ageing Tensile Stiffness (SATS) conditioning test
- BS ISO 20623:2017 Petroleum and related products. Determination of the extreme-pressure and anti-wear properties of lubricants. Four-ball method (European conditions)
- BS EN 16523-2:2015 Determination of material resistance to permeation by chemicals. Permeation by gaseous chemical under conditions of continuous contact
- BS EN 16523-1:2015 Determination of material resistance to permeation by chemicals. Permeation by liquid chemical under conditions of continuous contact
- BS EN 16523-1:2015+A1:2018 Determination of material resistance to permeation by chemicals. Permeation by gaseous chemical under conditions of continuous contact
- BS EN 16523-2:2015+A1:2018 Determination of material resistance to permeation by chemicals - Permeation by potentially hazardous gaseous chemicals under conditions of continuous contact
- DD IEC/TS 60815-1:2008 Selection and dimensioning of high-voltage insulators intended for use in polluted conditions - Definitions, information and general principles
- BS EN ISO 15616-1:2003 Acceptance tests for CO2- laser beam machines for high quality welding and cutting - General principles, acceptance conditions
- BS DD IEC/TS 60815-1:2009 Selection and dimensioning of high-voltage insulators intended for use in polluted conditions. Definitions, information and general principles
- BS DD IEC/TS 60815-1:2008 Selection and dimensioning of high-voltage insulators intended for use in polluted conditions - Definitions, information and general principles
- BS IEC 60300-3-5:2001 Dependability management - Application guide - Application guide - Reliability test conditions and statistical test principles
- BS 7527-2.1:1991 Classification of environmental conditions - Environmental conditions appearing in nature - Temperature and humidity
CEN - European Committee for Standardization, Antigen condition
- EN 321:1993 Fibreboards - Cyclic Tests in Humid Conditions
- PREN 13121-1-2019 GRP tanks and vessels for use above ground - Part 1: Raw materials - Specification conditions and acceptance criteria
- EN 16523-2:2015/PRA1:2017 Determination of material resistance to permeation by chemicals - Part 2: Permeation by potentially hazardous gaseous chemicals under conditions of continuous contact
国家市场监督管理总局、中国国家标准化管理委员会, Antigen condition
- GB/T 37267-2018 General specification of seismic bracing for building
- GB/T 20969.2-2021 Special environmental condition—Machinery for plateau—Part 2:Requirement for construction machinery on plateau
- GB/T 20969.1-2021 Special environmental condition—Machinery for plateau—Part 1: Requirements for internal combustion engines on plateau
- GB/T 20645-2021 Specific environmental condition—Technical requirements of low-voltage apparatuses for plateau
- GB/T 20969.5-2021 Special environmental condition—Machinery for plateau—Part 5:Guide rule of test for plateau natural environment—Construction machinery
- GB/T 20969.4-2021 Special environmental condition—Machinery for plateau—Part 4:Guide rule of test for plateau natural environment—Internal combustion engines
Japanese Industrial Standards Committee (JISC), Antigen condition
- JIS K 3822:1990 Testing methods for specific resistivity recovery characteristic of water filtered by ultrafiltration modules
- JIS K 7127:1999 Plastics -- Determination of tensile properties -- Part 3: Test conditions for films and sheets
- JIS K 6330-7:2011 Rubber and plastics hoses -- Part 7: Assessment of ozone resistance under static conditions
- JIS K 3834:1990 Testing methods for specific resistivity recovery characteristic of water filtered by membranes
- JIS K 6330-7:1998 Testing methods for rubber and plastics hoses -- Part 7: Assessment of ozone resistance under static conditions
- JIS C 0118:1999 Classification of environmental conditions -- Part 2: Environmental conditions appearing in nature. Solar radiation and temperature
- JIS Z 2801 AMD 1:2006 Antimicrobial products -- Test for antimicrobial activity and efficacy (Amendment 1)
- JIS Z 2801 AMD 1:2012 Antibacterial products -- Test for antibacterial activity and efficacy (Amendment 1)
- JIS C 2136:2017 Electrical insulating materials used under severe ambient conditions -- Test methods for evaluating resistance to tracking and erosion
- JIS K 7165:2008 Plastics -- Determination of tensile properties -- Part 5: Test conditions for unidirectional fibre-reinforced plastic composites
Hubei Provincial Standard of the People's Republic of China, Antigen condition
- DB42/T 1590-2020 H7 subtype avian influenza virus colloidal gold test strip antigen detection method
BE-NBN, Antigen condition
- NBN-ISO 8340:1992 Building construction - Jointing products - Sealants - Determination of tensile properties at maintained extension
- NBN-EN 27326-1993 Rubber and plastics hoses. Assessment of ozone resistance under static conditions (ISO 7326:1991)
Danish Standards Foundation, Antigen condition
- DS/EN 13121-1:2003 GRP tanks and vessels for use above ground - Part 1: Raw materials - Specification conditions and acceptance conditions
- DS/EN ISO 8580:1995 Rubber and plastics hoses - Determination of ultraviolet resistance under static conditions
- DS/EN ISO 11343:2005 Adhesives - Determination of dynamic resistance to cleavage of high-strength adhesive bonds under impact conditions - Wedge impact method
- DS/EN 62132-1:2006 Integrated circuits - Measurement of electromagnetic immunity, 150 kHz to 1 GHz - Part 1: General conditions and definitions
- DS/EN ISO 14744-1:2008 Welding - Acceptance inspection of electron beam welding machines - Part 1: Principles and acceptance conditions
- DS/EN 20187:1993 Paper, board and pulps. Standard atmosphere for conditioning and testing and procedure for monitoring the atmosphere and conditioning of samples
- DS/ISO 15213:2003 Microbiology of food and animal feeding stuffs - Horizontal method for the enumeration of sulfite-reducing bacteria growing under anaerobic conditions
Lithuanian Standards Office , Antigen condition
- LST EN 13121-1-2004 GRP tanks and vessels for use above ground - Part 1: Raw materials - Specification conditions and acceptance conditions
- LST EN ISO 20623:2004 Petroleum and related products - Determination of the extreme-pressure and anti-wear properties of fluids - Four ball method (European conditions) (ISO 20623:2003)
- LST EN ISO 14744-1:2008 Welding - Acceptance inspection of electron beam welding machines - Part 1: Principles and acceptance conditions (ISO 14744-1:2008)
AENOR, Antigen condition
- UNE-EN 13121-1:2004 GRP tanks and vessels for use above ground - Part 1: Raw materials - Specification conditions and acceptance conditions
- UNE-EN 603-1:1996 ALUMINIUM AND ALUMINIUM ALLOYS. WROUGHT FORGING STOCK. PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY.
- UNE-EN ISO 20623:2004 Petroleum and related products - Determination of the extreme-pressure and anti-wear properties of fluids - Four ball method (European conditions) (ISO 20623:2003)
- UNE 9007:1985 PRESCRIBED CONDITIONS FOR SOLID FUELS OF FOSSIL ORIGIN, NECESSAIRES FOR THE BOILER'S PROJECTS.
- UNE-EN ISO 14744-1:2009 Welding - Acceptance inspection of electron beam welding machines - Part 1: Principles and acceptance conditions (ISO 14744-1:2008)
Korean Agency for Technology and Standards (KATS), Antigen condition
- KS B ISO 11031:2017 Cranes — Principles for seismically resistant design
- KS M ISO 8580:2009 Rubber and plastics hoses－Determination of ultra-violet resistance under static conditions
- KS M ISO 8580:2013 Rubber and plastics hoses－Determination of ultra-violet resistance under static conditions
- KS M ISO 15361:2007 Pulps－Determination of zero-span tensile strength, wet or dry
- KS M ISO 15361:2017 Pulps－Determination of zero-span tensile strength, wet or dry
- KS F ISO 16987:2006 Wood-based panels-Determination of moisture resistance under cyclic test conditions
- KS F ISO 16987:2013 Wood-based panels－Determination of moisture resistance under cyclic test conditions
- KS M ISO 3011:2012 Rubber- or plastics-coated fabrics-Determination of resistance to ozone cracking under static conditions
- KS D ISO 24314-2007(2012) Structural steels－Structural steels for building with improved seismic resistance－Technical delivery conditions
- KS M ISO 527-3:2011 Plastics-Determination of tensile properties-Part 3:Test conditions for films and sheets
- KS M ISO 527-3:2016 Plastics－Determination of tensile properties－Part 3：Test conditions for films and sheets
- KS P 1013-2010(2016) Standard reference materials for the quality control of antigen detection tests of Plasmodium falciparum malaria
- KS P 1014-2010(2016) Standard reference materials for the quality control of antigen detection tests of Plasmodium vivax malaria
- KS D ISO 24314:2007 Structural steels-Structural steels for building with improved seismic resistance-Technical delivery conditions
- KS B ISO 14744-1:2021 Welding — Acceptance inspection of electron beam welding machines — Part 1: Principles and acceptance conditions
- KS B ISO 14744-1:2016 Welding－Acceptance inspection of electron beam welding machines-Part 1：Principles and acceptance conditions
- KS C IEC 60870-2-2-2003(2018)
- KS M ISO 20623:2018 Petroleum and related products — Determination of extreme-pressure and anti-wear properties of lubricants — Four-ball method(European conditions)
- KS C IEC 62340:2012 Nuclear power plants-Instrumentation and control systems important to safety-Requirements for coping with common cause failure(CCF)
- KS C IEC 60587-2017(2022) Test methods for evaluating resistance to tracking and erosion ofelectrical insulating materials used under severe ambient conditions
- KS M ISO 20292:2011 Materials for the production of primary aluminium-Dense refractory bricks-Determination of cryolite resistance
- KS M ISO 527-5:2012 Plastics－Determination of tensile properties－Part 5：Test conditions for unidirectional fibre-reinforced plastic composites
- KS P 1013-2010 Standard reference materials for the quality control of antigen detection tests of Plasmodium falciparum malaria
- KS P 1014-2010 Standard reference materials for the quality control of antigen detection tests of Plasmodium vivax malaria
- KS M ISO 5628:2012 Paper and board-Determination of bending stiffness-General principles for two-point, three-point and four-point methods
- KS B 0908-2001 Welding-Acceptance inspection of electron beam welding machines-Part 1:Principles and acceptance conditions
(U.S.) Ford Automotive Standards, Antigen condition
NL-NEN, Antigen condition
- NEN-EN 10155-1993 Structural steels with improved atmospheric corrosion resistance. Technical delivery conditions
- NEN 5185-1990 Quarry stone and similar stony materials Determination of crushing strength
YU-JUS, Antigen condition
- JUS U.C4.660-1994 Spacing of trees - Technical conditions and general principles
- JUS G.S2.140-1985 Rubber and plastics hoses. Assessment of ozone resistance under static conditions
- JUS B.C1.017-2001 Slag - constituent for cement production Classification, technical conditions and test methods
- JUS N.B2.762-1990 Low voltage electrical installations. Verification of conditions for protection by automatic disconnection of supply, Measurement of earth electrode resistance
- JUS N.A5.145-1984 Testing of insulating materials for electrical purposes. Test method for evaluating tbe resistance to tracking and erosion, for materials used under severe ambient conditions
- JUS B.C1.029-2001 Calcium-sulfate - cement setting time regulator Classification and technical conditions
Hebei Provincial Standard of the People's Republic of China, Antigen condition
- DB13/T 5048-2019 Technical conditions of raw coal for coal catalytic gasification
Shandong Provincial Standard of the People's Republic of China, Antigen condition
Professional Standard - Geology, Antigen condition
- DZ/T 0183-1997 General technical requirements for atomic fluorescence photometer
- DZ 0030-1992 Technical conditions of XDY-1 double-channel atomic fluorescence photometer
Professional Standard - Forestry, Antigen condition
- LY/T 1135-1993 Technical specification for longitudinal plate chain conveyor for logs
- LY/T 1137-1993 Technical specification for log longitudinal circular chain conveyor
农业农村部, Antigen condition
Sichuan Provincial Standard of the People's Republic of China, Antigen condition
- DB51/T 2189-2016 Technical conditions of vanadium-containing hot-rolled ribbed anti-seismic steel bars
- DB51/T 1598.1-2023 Identification of causes of electrical fires in low voltage lines Part 1: Necessary conditions
- DB51/T 1598.1-2013 Guidelines for identifying the cause of electrical fires on low-voltage lines Part 1: Necessary conditions
Group Standards of the People's Republic of China, Antigen condition
- T/CSEE 0332-2022 General technical conditions for pumping high-resistance protection devices
- T/CWAN 0071-2023 Raw and auxiliary materials for welding consumables- Technical requirements for procurement of wire rods,wires and strips
- T/TBPS 4002-2017 General specification & test methods for constant voltage power supplies.a.c.output,interference immunity type
- T/CEC 354-2020 General technical requirements for transformer low-voltage short-circuit impedance tester
- T/CWAN 0077-2023 Raw and auxiliary materials for welding consumables- Technical requirements for procurement of organic matters
- T/CWAN 0075-2023 Raw and auxiliary materials for welding consumables- Technical requirements for procurement of mineral powders
- T/CWAN 0078-2023 Raw and auxiliary materials for welding consumables- Technical requirements for procurement of binders
- T/CWAN 0074-2023 Raw and auxiliary materials for welding consumables- Technical requirements for procurement of alloy powders
- T/CWAN 0076-2023 Raw and auxiliary materials for welding consumables- Technical requirements for procurement of chemical products
- T/CWAN 0079-2023 Raw and auxiliary materials for welding consumables- Technical requirements for procurement of auxiliary materials
- T/CWAN 0073-2023 Raw and auxiliary materials for welding consumables- Technical requirements for procurement of metallic powders
- T/EPIAJL 5-2019 Dry-type air-core reactor low temperature adaptability technical conditions and operation and maintenance requirements
International Organization for Standardization (ISO), Antigen condition
- ISO/DTR 25741-1 Lifts and escalators subject to seismic conditions — Compilation report — Part 1: Rule by rule comparison
- ISO 16987:2003 Wood-based panels - Determination of moisture resistance under cyclic test conditions
- ISO/TR 3956:1975 Principles of structural fire-engineering design with special regard to the connection between real fire exposure and the heating conditions of the standard fire-resistance test (ISO 834)
- ISO 3011:1975 Title missing - Legacy paper document
- ISO 3011:1981 Rubber or plastics coated fabrics; Determination of resistance to ozone cracking under static conditions
- ISO 3011:2021 Rubber- or plastics-coated fabrics - Determination of resistance to ozone cracking under static conditions
- ISO 128-2:2020 Technical product documentation (TPD) — General principles of representation — Part 2: Basic conventions for lines
- ISO 128-2:2022 Technical product documentation (TPD) — General principles of representation — Part 2: Basic conventions for lines
- ISO 24314:2006 Structural steels - Structural steels for building with improved seismic resistance - Technical delivery conditions
- ISO 630-6:2014 Structural steels - Part 6: Technical delivery conditions for seismic-proof improved structural steels for building
- ISO 14744-1:2000 Welding - Acceptance inspection of electron beam welding machines - Part 1: Principles and acceptance conditions
- ISO/TR 10129:1993 Plain bearings; testing of bearing metals; resistance to corrosion by lubricants under static conditions
- ISO 14744-1:2008 Welding - Acceptance inspection of electron beam welding machines - Part 1: Principles and acceptance conditions
- ISO 22889:2007 Metallic materials — Method of test for the determination of resistance to stable crack extension using specimens of low constraint (Second Edition)
- ISO 20292:2009 Materials for the production of primary aluminium - Dense refractory bricks - Determination of cryolite resistance
- ISO/FDIS 630-6 Structural steels — Part 6: Technical delivery conditions for seismic-proof improved structural steels for building
- ISO 630-6:2023 Structural steels — Part 6: Technical delivery conditions for seismic-proof improved structural steels for building
- ISO/IEC TR 14759:1999 Software engineering - Mock up and prototype - A categorization of software mock up and prototype models and their use
- ISO/TR 20491:2019 Fasteners — Fundamentals of hydrogen embrittlement in steel fasteners
Professional Standard - Coal, Antigen condition
- MT/T 793-1998 Testing of shear strength for rock mass in situ
- MT/T 977-2006 The equipments specifications of the crag body stress test set by means of sleeve compression fracture method in mine
KR-KS, Antigen condition
- KS M ISO 8580-2009 Rubber and plastics hoses－Determination of ultra-violet resistance under static conditions
- KS E ISO 4700-2017 Iron ore pellets for blast furnace and direct reduction feedstocks－Determination of the crushing strength
- KS H ISO 6565-2016 Tobacco and tobacco products－Draw resistance of cigarettes and pressure drop of filter rods－Standard conditions and measurement
- KS B ISO 14744-1-2016 Welding－Acceptance inspection of electron beam welding machines-Part 1：Principles and acceptance conditions
- KS B ISO 14744-1-2021 Welding — Acceptance inspection of electron beam welding machines — Part 1: Principles and acceptance conditions
- KS M ISO 20623-2018 Petroleum and related products — Determination of extreme-pressure and anti-wear properties of lubricants — Four-ball method(European conditions)
- KS M ISO 20623-2018(2023) Petroleum and related products — Determination of extreme-pressure and anti-wear properties of lubricants — Four-ball method(European conditions)
Indonesia Standards, Antigen condition
Shanghai Provincial Standard of the People's Republic of China, Antigen condition
- DB31/ 122-1993 AB Antibacterial Fiber Products Safety and Hygienic Technical Conditions
交通运输部, Antigen condition
- JT/T 1239-2019 Technical specifications of anti-icing coating materials for asphalt pavement
Xinjiang Provincial Standard of the People's Republic of China, Antigen condition
- DB65/T 3683-2014 Technical specifications of raw materials for ground-use crystalline silicon photovoltaic modules
IEEE - The Institute of Electrical and Electronics Engineers@ Inc., Antigen condition
- IEEE 1B-1944 REPORT ON GUIDING PRINCIPLES FOR THE SPECIFICATION OF SERVICE CONDITIONS IN ELECTRICAL STANDARDS
Professional Standard - Commodity Inspection, Antigen condition
- SN/T 2839-2011 General technical requirements for the inspection of imported and exported textile raw materials
- SN/T 3949-2014 Plastic package.Determination of harmful material bisphenol A.Conjuction of antigen and antibody method
Professional Standard - Electron, Antigen condition
- SJ/T 10541-1994 General specification of constant viltage power supplies A.C. output,interference immunity type
Professional Standard - Electricity, Antigen condition
- DL/T 271-2012 Technical specification for 330 kV-750 kV oil immersed shunt-reactor
- DL/T 242-2012 General specification for high-voltage shunt reactor protection equipment
- DL/T 2062-2019 Technical conditions for use of ±1100kV UHV DC smoothing reactor
- DL 462-1992 Technical conditions for ordering series reactors used for high-voltage parallel capacitors
- DL/T 2267-2021 Terminology used for power transformers (reactors, transformers) and component parts and raw materials
- DL/T 2604-2023
Heilongjiang Provincial Standard of the People's Republic of China, Antigen condition
- DB23/T 2067-2018 Technical conditions for expandable graphite with low sulfur and high oxidation resistance
International Telecommunication Union (ITU), Antigen condition
- ITU-T SERIE G.100 SUPP 31 SPANISH-1993 PRINCIPLES OF DETERMINING AN IMPEDANCE STRATEGY FOR THE LOCAL NETWORK
- ITU-T SERIES G SUPP 31-1993 Principles of Determining an Impedance Strategy for the Local Network - Transmission Systems and Media General Characteristics of National Systems Forming Part of International Connections Study Group XII; 11 pp
- ITU-T G SUPP 31-1993 Principles of determining an impedance strategy for the local network
未注明发布机构, Antigen condition
PT-IPQ, Antigen condition
- NP 2888-1984
- NP EN 473-2001 Non destructive testing-Qualification and sertification of NDT personnel General Principles
- NP ENV 1998-1-3-2002 Eurocode 8:Design provisions for earthquake resistance of structures Part 1-3:General rules-Specific rules for various materials and elements
- NP 27-1960
Professional Standard - Urban Construction, Antigen condition
- CJ/T 476-2015 General technical requirements for anti-seismic supports and hangers of building electromechanical equipment
Military Standard of the People's Republic of China-General Armament Department, Antigen condition
ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Antigen condition
- ASHRAE 4617-2003 First Principles Modeling of Thermal Sensation Responses in Stedy-State and Transient Conditions
Institute of Electrical and Electronics Engineers (IEEE), Antigen condition
- AIEE No 1B-1944 AIEE Report on Guiding Principles for the Specification of Service Conditions in Electrical Standards
Professional Standard - Energy, Antigen condition
工业和信息化部/国家能源局, Antigen condition
国家能源局, Antigen condition
- NB/T 10688-2021 Technical conditions for sealing products for high-voltage DC equipment used in plateaus
- NB/T 10478-2020 Humid and hot environmental conditions and technical requirements for dry air-core reactors
- NB/T 10687-2021 Specifications for selection and inspection of high-voltage DC equipment for high-seismic intensity conditions on plateaus
Professional Standard - Railway, Antigen condition
- TB/T 3040-2002 Technical specifications for dry-type air-core series reactors for electrified railways
- TB/T 3213-2009 General technical specification of electric and electronic products-used on rolling stock for plateau
Association Francaise de Normalisation, Antigen condition
- NF L17-996:1995 Aircraft industry. Converted raw timber. Technical specification, test methods and conditions of use.
- NF C96-261-1*NF EN 62132-1:2016 Integrated circuits - Measurement of electromagnetic immunity - Part 1 : general conditions and definitions
- NF T51-034-3:1995 Plastics. Determination of tensile properties. Part 3 : test conditions for films and sheets.
- NF EN 10025-5:2019 Produits laminés à chaud en aciers de construction - Partie 5 : conditions techniques de livraison pour les aciers de construction à résistance améliorée à la corrosion atmosphérique
- NF Z87-019-14:1995 EQUIPMENT ENGINEERING (EE). ENVIRONMENTAL CONDITIONS AND ENVIRONMENTAL TESTS FOR TELECOMMUNICATION EQUIPMENT. PART 1-4 : CLASSIFICATION OF ENVIRONMENTAL CONDITIONS. STATIONARY USE AT NON-WEATHERPROTECTED LOCATIONS. (EUROPEAN TELECOMMUNICATION STANDARD ETS
- NF M88-557-1:2003 GRP tanks and vessels for use above ground - Part 1 : raw materials - Specification conditions and acceptance conditions.
- NF P20-513:1985 METHODS OF TESTING DOORS. BEHAVIOUR UNDER HUMIDITY VARIATIONS OF DOOR LEAVES PLACED IN SUCCESSIVE UNIFOR CLIMATES. (EUROPEAN STANDARD EN 43).
- NF A81-345:1997 Welding consumables. Covered electrodes for manual metal arc welding of creep-resisting steels. Classification.
- NF C96-261-1:2006 Integrated circuits - Measurement of electromagnetic immunity, 150 kHz to 1 GHz - Part 1 : general conditions and definitions.
- NF T60-620*NF EN ISO 20623:2018 Petroleum and related products - Determination of the extreme-pressure and anti-wear properties of lubricants - Four-ball method (European conditions)
- NF Z87-019-1-3*NF EN 300019-1-3:2014 Environmental Engineering (EE) - Environmental conditions and environmental tests for telecommunication equipment - Part 1-3 : classification of environmental conditions - Stationary use at weatherproted locations (V2.4-1)
- NF Z87-019-1-4*NF EN 300019-1-4:2014 Environmental Engineering (EE) - Environmental conditions and environmental tests for telecommunications equipment - Part 1-4 : classification of environmental conditions - Stationary use at non-weatherprotected locations (V2.2.1)
- NF Z87-019-13:1995 EQUIPMENT ENGINEERING (EE). ENVIRONMENTAL CONDITIONS AND ENVIRONMENTAL TESTS FOR TELECOMMUNICATION EQUIPMENT. PART 1-3 : CLASSIFICATION OF ENVIRONMENTAL CONDITIONS. STATIONARY USE AT WEATHER-PROTECTED LOCATIONS. (EUROPEAN TELECOMMUNICATION STANDARD ETS 30
- NF A89-700-1*NF EN ISO 14744-1:2008 Welding - Acceptance inspection of electron beam welding machines - Part 1 : principles and acceptance conditions
- NF G37-112:2009 Rubber or plastics-coated fabrics - Determination of resistance to ozone cracking under static conditions.
- NF P20-513*NF EN 1294:2000 Door leaves - Determination of the behaviour under humidity variations in successive uniform climates
- NF EN 62132-1:2016 Circuits intégrés - Méthode de l'immunité électromagnétique - Partie 1 : conditions générales et définitions
- NF EN ISO 11343:2019 Adhésifs - Détermination de la résistance dynamique au clivage de joints collés à haute résistance soumis aux conditions d'impact - Méthode d'impact au coin
- NF E60-270:1991 Chip removing machine-tools. Conditions of working for measurement of noise. General conditions.
- NF EN ISO 20623:2018 Pétrole et produits connexes - Détermination des propriétés extrême pression et anti-usure des lubrifiants - Essai quatre billes (conditions Européennes)
- NF EN 13121-1:2021 Réservoirs et récipients en PRV pour applications hors sol - Partie 1 : matières premières - Conditions de spécification et critères d'acceptation
- NF EN ISO 14744-1:2008 Soudage - Essais de réception des machines de soudage par faisceau d'électrons - Partie 1 : principes et conditions de réception
- NF E60-120:1981 Test conditions and installation conditions for work-holding fixed tables of machine tools.
- NF C20-000:1990 CLASSIFICATION OF ENVIRONMENTAL CONDITIONS.
- NF ISO 11007-1:2021 Produits pétroliers et lubrifiants - Détermination des caractéristiques antirouille des graisses lubrifiantes - Partie 1 : conditions dynamiques humides
- NF P98-611:1993 Horizontal road signs. Railway signs. Visibility of signs in clear weather conditions: In situ dynamic measurement methods
- NF T51-034-5:1997 Plastics. Determination of tensile properties. Part 5 : test conditions for unidirectional fibre-reinforced plastic composites.
IN-BIS, Antigen condition
Standard Association of Australia （SAA）, Antigen condition
Society of Automotive Engineers (SAE), Antigen condition
- SAE J1113/22-2010 Electromagnetic Compatibility Measurement Procedure for Vehicle Components—Part 22—Immunity to Radiated Magnetic Fields
- SAE AMS6317G-2003 Steel Bars and Forgings 1.8Ni 0.25Mo (0.38-0.43C) (4640) Heat Treated, 125 ksi (862 MPa) Tensile Strength
- SAE AMS6317F-1995 STEEL BARS AND FORGINGS 1.8Ni - 0.25Mo (0.38 - 0.43C) (4640) Heat Treated, 125 ksi (862 MPa) Tensile Strength
- SAE AMS6317L-2022 Steel Bars and Forgings 1.8Ni - 0.25Mo (0.38 - 0.43C) (4640) Heat Treated, 125 ksi (862 MPa) Tensile Strength
- SAE AMS2550E-1994 Treatment of Sheet Metal Parts, Corrosion Resistant Steel
- SAE AMS6327L-2017 Steel Bars and Forgings 0.50Cr - 0.55Ni - 0.25Mo (0.38 - 0.43C) (SAE 8740) Heat Treated, 125 ksi (862 MPa) Tensile Strength
- SAE AMS6327G-2000 Steel Bars and Forgings 0.50Cr - 0.55Ni 0 0.25Mo (0.38 - 0.43C) (SAE 8740) Heat Treated, 125,000 psi (862 MPa) Tensile Strength
International Electrotechnical Commission (IEC), Antigen condition
- IEC 62132-1:2006 Integrated circuits - Measurement of electromagnetic immunity, 150 kHz to 1 GHz - Part 1: General conditions and definitions
- IEC 62132-1:2015 Integrated circuits - Measurement of electromagnetic immunity - Part 1: General conditions and definitions
PL-PKN, Antigen condition
- PN P04605-01-1988 Wear testing of textile cloth articles General principles
- PN M01150-1981 Constructional docvmentation. Principle for introduction of changes
- PN N01623-1984 Constructional documentation. Principle of preparation for textual documents
中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Antigen condition
- GB/T 34560.6-2017 Structural steels—Part 6: Technical delivery conditions for seismic-improved structural steels for building
AT-ON, Antigen condition
- ONORM M 7832-1987 Filier metals for arc welding of creep- resisting steels; Classification, designation, technical conditions of delivery, marking of conformity
European Committee for Electrotechnical Standardization（CENELEC）, Antigen condition
- EN 62132-1:2016 Integrated circuits - Measurement of electromagnetic immunity - Part 1: General conditions and definitions
GM North America, Antigen condition
Professional Standard - Agriculture, Antigen condition
- 897兽药质量标准2017年版 Biological Products Volume 1 Veterinary Drug Quality Standard Chlamydia psittaci Antibody Colloidal Gold Test Strip
- 1126兽药质量标准2017年版 Biological Products Volume 2 Veterinary Drug Quality Standard Instructions for Colloidal Gold Detection Test Strips for Chlamydia psittaci Antibody
Building Officials and Code Administrators International(U.S.), Antigen condition
IX-UIC, Antigen condition
International Code Council, Antigen condition
SAE - SAE International, Antigen condition
- SAE AMS6317D-1978 STEEL BARS AND FORGINGS 1.8Ni - 0.25Mo (0.38 - 0.43C) (4640) Heat Treated@ 125@ 000 psi (862 MPa) Tensile Strength
- SAE AMS6317E-1986 STEEL BARS AND FORGINGS 1.8Ni - 0.25Mo (0.38 - 0.43C) (4640) Heat Treated@ 125@ 000 psi (860 MPa) Tensile Strength
- SAE AMS6327E-1972 STEEL BARS AND FORGINGS 0.50Cr - 0.55Ni - 0.25Mo (0.38 - 0.43C) (SAE 8740) Heat Treated@ 125@ 000 psi (862MPa) Tensile Strength
- SAE AMS6317C-1971 STEEL BARS AND FORGINGS 1.8Ni - 0.25Mo (0.38 - 0.43C) (4640) Heat Treated@ 125@ 000 psi (862 MN/m2) Tensile Strength
- SAE AMS6325E-1972 STEEL BARS AND FORGINGS 0.50Cr - 0.55Ni - 0.25Mo (0.38 - 0.43C) (SAE 8740) Heat Treated@ 105@ 000 psi (724 MPa) Tensile Strength
- SAE AMS6327G-1988 Steel Bars and Forgings 0.50Cr - 0.55Ni - 0.25Mo (0.38 - 0.43C) (SAE 8740) Heat Treated@ 125@000 psi (862 MPa) Tensile Strength
Professional Standard - Nuclear Industry, Antigen condition
- EJ/T 800.2-1993 General technical requirements for anti-seismic and anti-vibration chassis and cabinets for reactors Shipborne type
- EJ/T 800.1-1993 General specifications for anti-seismic and anti-vibration chassis and cabinets for reactors Ground-fixed type
ES-UNE, Antigen condition
- UNE-EN 62132-1:2016 Integrated circuits - Measurement of electromagnetic immunity - Part 1: General conditions and definitions (Endorsed by AENOR in April of 2016.)
- UNE-EN ISO 20623:2018 Petroleum and related products - Determination of the extreme-pressure and anti-wear properties of lubricants - Four-ball method (European conditions) (ISO 20623:2017)
- UNE-EN 13121-1:2022 GRP tanks and vessels for use above ground - Part 1: Raw materials - Specification conditions and acceptance criteria
CU-NC, Antigen condition
- NC 34-47-1987 Agricultural Machinery and Elements. Forestry and Agricultural Machines. Methodology for the Determination of Testing Conditions
- NC 34-48-1987 Agricultural Machinery and Elements. Foresty and Agricultural Machines. Energetic Evaluation. Methodology for its Impleraentation
Instrument Society of America (ISA), Antigen condition
- ISA 71.03-1995 Environmental Conditions for Process Measurement and Control Systems: Mechanical Influences
- ISA 71.04-1985 Environmental Conditions for Process Measurement and Control Systems: Airborne Contaminants Formerly ISA - S71.04 - 1985
- ISA 71.01-1985 Environmental Conditions for Process Measurement and Control Systems: Temperature and Humidity
US-VA, Antigen condition
US-FCR, Antigen condition
United States Navy, Antigen condition
IT-UNI, Antigen condition
US-CFR-file, Antigen condition
- CFR 29-2590.701-7-2014 Labor. Part2590:Rules and regulations for group health plans. Section2590.701-7:HMO affiliation period as an alternative to a preexisting condition exclusion.
Association of German Mechanical Engineers, Antigen condition
- DVS 2308-2000 Constructional principles of components and workpieces for thermal spraying
BR-ABNT, Antigen condition
BELST, Antigen condition
- STB 7.2-2012 System of standards on information, librarianship and publishing. Originals for printing reproduction in newspapers production. General technical conditions
GM Europe, Antigen condition
- GME GMI 60267-2010 Determination of Impact Resistance of Plastic Components (English/German; This standard may be applied only for current projects incl. Global Epsilon e (37##). It is Superceded for all future projects and replaced by GMW14093.)
American National Standards Institute （ANSI), Antigen condition