ZH
RU
ES
Conditions for separation
Conditions for separation, Total:500 items.
In the international standard classification, Conditions for separation involves: Rotating machinery, Road engineering, Chipless working equipment, Plant and equipment for the food industry, Pumps, Equipment for the chemical industry, Mining and quarrying, Equipment for processing of minerals, Vacuum technology, Welding, brazing and soldering, Agricultural machines, implements and equipment, Semiconducting materials, Organic chemicals, Products of the chemical industry, Iron and steel products, Springs, Sewing machines and other equipment for the clothing industry, Ventilators. Fans. Air-conditioners, Shafts and couplings, Integrated circuits. Microelectronics, Construction materials, Rubber and plastics products, Electricity. Magnetism. Electrical and magnetic measurements, Surface treatment and coating, Fluid power systems, Power transmission and distribution networks, Equipment for petroleum and natural gas industries, Analytical chemistry, Electronic components in general, Interface and interconnection equipment, Protection against crime, Photography, Vocabularies, Powder metallurgy, Radiation measurements, Road vehicle systems, Farming and forestry, Shipbuilding and marine structures in general, Nuclear energy engineering, Geology. Meteorology. Hydrology, Internal combustion engines for road vehicles, Fibre optic communications, Fluid storage devices, Hospital equipment, Internal combustion engines, Insulating fluids, Flexible drives and transmissions, Pipeline components and pipelines, Galvanic cells and batteries, Motor cycles and mopeds, Wastes, Road vehicles in general, Domestic, commercial and industrial heating appliances, Earth-moving machinery, Burners. Boilers, Radiocommunications, Environmental testing, Laundry appliances, Wind turbine systems and other alternative sources of energy, Conducting materials, Industrial automation systems, Test conditions and procedures in general, Electrical and electronic testing, Lubricants, industrial oils and related products, Power stations in general, Components and accessories for telecommunications equipment, Inorganic chemicals, Reinforced plastics, Aerospace fluid systems and components, Accident and disaster control, Electric traction equipment, Terminology (principles and coordination), Switchgear and controlgear, Electrical equipment for working in special conditions, Electrical wires and cables, Electrical engineering in general, Mining equipment, Applications of information technology, Medical equipment, Company organization and management, Non-destructive testing, Heat treatment, Valves, Hydraulic energy engineering, Document imaging applications, Paints and varnishes, Transformers. Reactors, Non-ferrous metals, Characteristics and design of machines, apparatus, equipment, Pulps, Paper and board, Acoustics and acoustic measurements, Piezoelectric and dielectric devices, Insulation.
Professional Standard - Machinery, Conditions for separation
- JB/T 9547-1999 Specification for centrifugal starting switch use of single-phase motor
- JB/T 9547-2011 Specification for centrifugal starting switch use of single-phase motor
- JB/T 12223-2015 Technical specifications of three-phase asynchronous motors for closed centrifugal refrigerators
- JB/T 9098-1999 Specification for tubular separator
- JB/T 8103-1999 Specification for disc separator
- JB/T 6308-2000 Centrifugal casting machine.Technical requirements
- JB/T 11095-2011 Centrifugal extractor specifications
- JB/T 5414-1991 Hot water centrifugal pump technical conditions
- JB/T 7767.1-1995 Technical conditions of milk separator
- JB/T 4082-1991 Sputtering ion pump technical conditions
- JB/T 6308-2013 Centrifugal casting machine technical conditions
- JB/T 9362-1999 Specification for ion selective electrodes
- JB/T 9191-1999 Specification for plasma surfacing gun
- JB/T 6101-1992 Electromagnetic separating drums Technical conditions
- JB/T 6704-2013 Tractor clutchs.Specifications
- JB/T 6101-2011 Electromagnetic drum.Technical requirements
- JB/T 6878.2-1993 Pipeline Centrifugal Pump Specifications
- JB/T 6535-1992 Centrifugal sewage pump technical conditions
- JB/T 445-1992 Technical conditions of top suspension centrifuge
- JB/T 12792-2016 Clutch.Damper springs.Technical specifications
- JB/T 9799.2-1999 IB single-stage centrifugal pumps.Technical specifications
- JB/T 4355-2004 Technical specification for mine centrifugal fan
- JB/T 8822-1998 High temperature centrifugal fan.Specification
- JB/T 9078.1-1999 Specifications for natural gas separation plants
- JB/T 6435.2-1992 Small size multi-stage centrifugal pumps - Technical specification
- JB/T 8822-2013 Technical condition of high temperature centrifugal fan
- JB/T 443-1992 Long shaft centrifugal deep well pump technical conditions
- JB/T 7241-1994 Technical conditions of precession unloading centrifuge
- JB/T 8100.2-1995 Specifications for Marine Disc Separator
- JB/T 447-1992 Technical conditions of piston pusher centrifuge
- JB/T 12793-2016 Clutch.Diaphragm spring.Technical specifications
- JB/T 9109-1999 Specifications for process camera
- JB/T 6071-1992 Gas phase antiruster. Technical conditions
- JB/T 4050.1-1999 Oils for vapor phase rust preventive.Specification
- JB/T 4051.1-1999 Paper for vapor phase rust preventive.Specfication
- JB/T 7036-2006 Hydraulic fluid power.Accumulators with separator.Technical requirements
- JB/T 9792.1-1999 Specifications for separating paddy rice mill
- JB/T 9792.2-1999 Specifications for separating minor food grains mill
- JB/T 10075-1999 Specifications of cold cathode ionization gauge
- JB/T 7217-2008 The painting specification for separating machines
- JB/T 7463-1994 Specifications for Hot Cathode Ionization Vacuum Gauge
- JB/T 6703-1993 Technical conditions of tractor clutch assembly
- JB/T 6663.2-1993 Technical conditions for light and small single-stage centrifugal pumps
- JB/T 7217-1994 General technical conditions for separation mechanical coating
- JB/T 7036-1993 Specifications for hydraulic isolating accumulators
- JB/T 7474.2-1994 Specifications for DX checking code in camera
- JB/T 10076-1999 Specifications of cold cathode ionization vaouum gauge head
- JB/T 10563-2006 Technical specification for general purposes centrifugal fans
- JB/T 6652-2010 Specification for marine gearbox clutch plates
- JB/T 10926-2010 Clutch-controlled screw presses.Specifications
- JB/T 11094-2011 Woven filter cloth for solid and liquid separation.Technology specifications
- JB/T 4335-1991 Specifications of screw discharge sedimentation centrifuge
- JB/T 7462-1994 Hot cathode ionization vacuum gauge specification
- JB/T 6652-1993 Specifications for marine gearbox clutch plates
- JB/T 5193-1991 General specifications for plastic parts of camera machinery
- JB/T 5189-1991 Specifications for camera aluminum alloy die-casting parts
- JB/T 5191-1991 General technical requirements for photomechanical stamping parts
- JB/T 7791-2014 Camera.date back technical conditions
- JB/T 7791-1995 Camera date back - Technical specifications
- JB/T 6225-1992 General technical specifications for induction phase shifters
- JB/T 7474.4-1994 Specifications for autofocus of camera
- JB/T 7474.5-1994 Basic camera performance acceptance conditions
- JB/T 7038-2006 Hydraulic fluid power.The shell of accumulators with separator.Technique requirements
- JB/T 6019-2006 Diffluencing centrifugal lubricating oil filters Specification
- JB/T 6703.2-2007 Tractor clutchs Part 2: Specifications
- JB/T 6019-1992 Specifications for split flow centrifugal oil filter
- JB/T 7038-1993 Specifications for housings of hydraulically isolated accumulators
- JB/T 11628-2013 Specification for YZP series variable-frequency adjustable-speed three-phase induction motors (cooled with centrifugal fan) for crane and metallurgical applications
- JB/T 12656-2016 Internal combustion engines.Electromagnetic fan clutches.Specifications
- JB/T 9836-2000 Specifications for tractor clutch disk assemblies
- JB/T 5902-2001 Technical conditions for oxygen pipelines used in air separation plants
- JB/T 6704-2007 The clutch cover and press-plate assembly for tractor Specifications
- JB/T 8103.1-2008 Disc separator.Part 1: General specification
- JB/T 11204-2011 Silicon oil fan clutch for internal combustion engine.Specifications
- JB/T 5902-2015 Specifications for oxygen pipelines for air separation equipment
- JB/T 6704-1993 Technical specifications for tractor clutch cover and pressure plate assembly
- JB/T 5294-1991 Specifications for large vertical single-stage single-suction centrifugal pumps
- JB/T 6067-1992 Gas phase rust-resistant plastic films Technical conditions
- JB/T 7474.1-1994 Specifications for built-in flash lamp in camera
- JB/T 7474.3-1994 Specifications for camera magazine and reverse layer
- JB/T 11308-2013 Overrunning clutches for wheel loader.Technical specifications
- JB/T 7731.2-1995 Specifications for small gasoline engine direct-coupled high-speed centrifugal pumps
- JB/T 3320.2-2000 Specification for small size single-phase synchronous generator
- JB/T 11817-2014 Specification for small-scale single phase synchronous generators
- JB/T 4271-2011 Specification for three-phase synchronous generator in ships
- JB/T 3727-1999 Specification for size series and fabrication of air lockers and coarse and fine poeder separators
- JB/T 12657-2016 Internal combustion engines.Electronically-controlled silicon oil fan clutches.Specifications
- JB/T 8846.1-2001 Crawler type bulldozer.Wet type steering clutch technical specifications
- JB/T 8846.2-2001 Crawler type bulldozer.Dry type steering clutch technical specifications
- JB/T 11669-2013 Specifications of steering clutch of walking tractor
- JB/T 1009-2007 Specification for YS series three-phase asynchronous motors
- JB/T 5330-1991 Technical conditions of vibration source three-phase asynchronous motor
- JB/T 1009-1991 Technical conditions of YS series three-phase asynchronous motor
- JB/T 8058-2016 Active alumina used in air separation plants.Specifications for inspecting and accepting
- JB/T 10405-2004 Technical condition for foundation and linkage of off-grid wind turbine generator system
- JB/T 8058-1996 Activated aluminum oxide for air separation equipment - Acceptance technical condition
- JB/T 10766-2007 Copper powder metallurgy dry brake friction lining of dutch of forging press.Specifications
- JB/T 10769.2-2007 Three-column and four-point suspension centrifuges.Part 2: Specifications
- JB/T 6018-1992 Specifications for split flow centrifugal oil filter rotor assembly
- JB/T 8668-1997 Large vertical type triphase asynchronous motors. Technical specification
- JB/T 4401.1-1999 Specification for small single phase synchronous generator in ships
- JB/T 4401.2-1999 Specification for small three - phase synchronous generator in ships
- JB/T 4271-1999 Specification for three-phase brushless generator in ships
- JB/T 3320.1-2000 Specification for small size brushless three-phase synchronous generator
- JB/T 4401-2013 Specification for small single-phase synchronous generator in ships
- JB/T 11816-2014 Specification for small-scale brushless three-phase synchronous generators
- JB/T 8668-2011 Technical requirement for the three-phase large vertical asynchronous motor
- JB/T 7591-2007 General specification of start components for small single phase asynchronous motor
- JB/T 7591-1994 General technical requirements for starting components of small single-phase asynchronous motors
- JB/T 12343-2015 Technical condition of metal orifice corrugated packing for air separation plant
- JB/T 10310-2011 Specification for powder metallurgy driven gears used in the motorbicycle clutch
- JB/T 6705-1993 Specifications for starter one-way clutches for tractors and internal combustion engines
- JB/T 10181.31-2014 Electric cables.Calculation of the current rating.Part 31: Sections on operating conditions.Reference operating conditions and selection of cable type
- JB/T 7474.2-2014 Automatic camera technology conditions.Part 2: DX check code
- JB/T 8667.1-1997 Large three-phase synchronous motors. Technical specification TK series
- JB/T 8667.2-1997 Large three-phase synchronous motors. Technical specification TL series
- JB/T 8157-1999 General specification for small power single phase AC series motor
- JB/T 6297-1992 Technical specification for YLJ series torque three-phase asynchronous motors
- JB/T 6297-2010 Specification for YLJ series three-phase induction torque motor
- JB/T 6956-2007 Iron nitriding for iron and steel parts
- JB/T 9081-2016 Cryogenic shutoff valves and throttle valves used for air separation plants.Specifications
- JB/T 9081-1999 Specifications for cryogenic shutoff valves and throttle valves used for air separation plants
- JB/T 6705-2006 Specifications of starters overrunning clutch for motor vehicles and internal-combustion engine
- JB/T 12309.1-2015 Specification of flameproof three-phase asynchronous motors.Part 1: YB3 series flameproof three-phase asynchronous motors (frame size 400 to 500)
- JB/T 7474.4-2014 Automatic camera technology conditions.Part 4: Automatic focusing
- JB/T 6507-1992 Specification for small three-phase induction hydrogenerator series
- JB/T 8682-1998 YM series three-phase asynchronous motors for woodworking. Technical specification
- JB/T 8250.7-1999 Condition and test method for pack, transport and storage of photographic apparatus
- JB/T 7125-1993 Technical specifications for small plane brake three-phase asynchronous motors
- JB/T 2224-2000 Technical requirements for the large-sized 3-phase 4-pole synchronous a.c.motors
- JB/T 7125-2010 Specification for small braking plane the three-phase induction motor
- JB/T 11731-2013 Non-destructive testing.General specification for ultrasonic phased array probe
- JB/T 5797-1991 General purpose marine three-phase asynchronous motor specification
- JB/T 7567-1994 Specifications for three-phase asynchronous motors for marine cable-steady winches
- JB/T 10400.1-2004 Gearbox of off-grid wind turbine generator system Part 1:Tectnical condition
- JB/T 10401.1-2004 Braking system of off-grid wind turbine generator system Part 1:Tectnical condition
- JB/T 6939.1-2004 Controller of off-grid wind turbine generator system Part 1:Technical condition
- JB/T 10402.1-2004 Yaw system of off-grid wind turbine generator system Part 1:Technology condition
- JB/T 11779-2014 Non-destructive testing instrument.Specifications for phased array ultrasonic testing instruments
- JB/T 7474.3-2014 Automatic camera technology conditions.Part 3: automatic film winding、film rewinding
- JB/T 7567-2016 Specification of three-phase asynchronous motor for preventer winches in ships
GM Europe, Conditions for separation
- GME R-10B-17-2001 Braking Distance in Wet Conditions (English/German; Includes Appendix A)
Professional Standard - Traffic, Conditions for separation
RU-GOST R, Conditions for separation
- GOST 19316-1998 Centrifugal moulds. Specifications
- GOST 19316-1973 Centrifugal moulds. Specifications
- GOST 24885-1991 Centrifugal separators for liquids. General technical conditions
- GOST 11117-1985 Serapators for milk purification. Types, main parameters and dimensions
- GOST 20298-1974 Ion-exchange resins. Cation exchangers. Specifications
- GOST 20301-1974 Ion-exchange resins. Anionites. Specifications
- GOST 30357-1996 Carbons cation exchangers. Specifications
- GOST 20429-1984 Folgoisol. Specifications
- GOST 8039-1993 Direct acting indicating analogue electrical measuring instruments and their accessories. Part 5. Special requirements for phase meters, power factor meters and synchroscopes
- GOST 8039-1979 Phase-angle and power-factor meters
- GOST 26902-1986 Radiographic films. Exposure conditions
- GOST 26995-1986 Ionization gas-discharge detectors. Specifications
- GOST 24876-1981 Photographic black-white negative films. Specifications
- GOST R ISO 8374-1993 Photography. Determination of ISO safelight conditions
- GOST 27451-1987 Ionizing radiation measuring means. General specifications
- GOST 27603-1988 Insulationg materials. Methods for testing under ionizing radiation
- GOST 10752-1979 Photographic paper "Unibrom". Specifications
- GOST 9583-1975 Cast iron pressure pipes made by centrifugal and semi continuous casting methods. Specifications
- GOST ISO 279-2014 Essential oils. Method for determination of relative density at a temperature of 20 °C. Reference method
- GOST R 56815-2015 Polymer composites. Method for determination specific work of exfoliation in tearing off conditions GIC
- GOST 11004-1984 Main mine fans. Specifications
- GOST R IEC 60789-1999 Characteristics and conditions of radionuclide imaging devices Anger type gamma cameras
- GOST 13.2.006-1987 Reprography. Copirography. Paper for electroph otography. Specifications
PT-IPQ, Conditions for separation
工业和信息化部/国家能源局, Conditions for separation
- JB/T 12969-2016 Technical specifications of high-voltage three-phase asynchronous motors for closed centrifugal refrigerators
- JB/T 1009-2016 YS series three-phase asynchronous motor technical conditions
- JB/T 8157-2016 General technical conditions for small power single-phase series motors
- JB/T 13302-2017 Technical specifications for three-phase asynchronous motors for escalators
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Conditions for separation
- GB/T 16907-2014 Technical specifications for centrifugal pumps (Class I)
- GB/T 16907-1997 Technical specifications for centrifugal pumps--Class I
- GB/T 5656-1994 Technical specifications for centrifugal pumps--Class II
- GB/T 5657-1995 Technical specifications for centrifugal pumps--class Ⅲ
- GB/T 5657-2013 Technical specifications for centrifugal pumps (Class III)
- GB/T 5656-2008 Technical specification for centrifugal pumps.Class Ⅱ
- GB 5659-1985 Technical specification for multistage centrifugal pumps
- GB/T 13755-1992 Three-colum centrifuge--Specifications
- GB/T 9149-1988 General specification for magnetic particle clutch
- GB/T 15862-1995 Generic specification for ion implantation equipment
- GB/T 9149-2008 General specification for magnetic particle clutch
- GB/T 25152-2010 Liquid-liquid separation cyclone technical conditions
- GB/T 15861-1995 Generic specification of ion beam etching system
- GB/T 30099-2013 General specifications for laboratory centrifuge
- GB/T 13275-1991 Technical specification for general purposes centrifugal fans
- GB/T 18300-2001 Specification for automatic sodium ion exchange
- GB/T 10832-2008 General specification for centrifigual and vortex pumps of ship
- GB/T 10832-1989 Centrifugal and vortex pumps for marine use--General technical specifications
- GB 3868-1983 Hydraulic fluid power--Gas-loaded accumulators with bladder separator--Specification for the rubber bladder
- GB/T 18300-2011 Specification for automatic control sodium ion exchange
- GB 10832-1989 Centrifugal and vortex pumps for marine use－General technical specifications
- GB 12951-1996 Specification of americium-24l alpha sources for ionization smoke fire detectors
- GB/T 18682-2002 Specifications of physical vapour deposition TiN films
- GB/T 19068.1-2003 Off-grid wind turbine generator system--Part 1: technical condition
- GB/T 30295-2013 Perfluorinated ion-exchange membrane for chlor-alkali industry.General technical specifications
- GB/T 30295-2013(英文版) Perfluorinated ion exchange membrane for chlor alkali industry—General technical specifications
- GB/T 31246-2014 Water treatment chemicals.Technical specification and test method of cationic polyacrylamides
- GB 11036-1989 Oily water separating equipment--Sheathed electric heater specification
- GB/Z 19398-2003 Industrial automation systems and integration-Operating conditions for discrete part manufacturing-equipment in industrial enviroments
- GB/T 11540-1989 Isolate and synthetic aroma chemicals--Determination of relative density
- GB/T 13957-2008 Technical requirement for the fundamental series of three-phase large asynchronous motor
- GB/T 13957-1992 Technical requirements for the fundamental series of 3-Phase large asynchronous motors
- GB/T 10403-1989 Multipolar and two-speed induction phase shifters,general specification for
- GB/T 10403-2007 General specification for multipolar and two-speed induction phase shifters
- GB/T 14816-1993 Three-phase asynchronous submersible electric motors for oil well—General specification
- GB/T 13957-2022 Technical requirements for the fundamental series of three-phase large asynchronous motor
- GB/T 15548-1995 General specification for three-phase synchronous generator driven by reciprocating internal combustion engine
- GB/T 15548-2008 General specification for three-phase synchronous generators driven by reciprocating internal combustion engine
- GB/T 3215-1982 Centrifugal pumps for refinery,chemical and petrochemical processes--General technical specifications
- GB/T 19115.1-2003 Off-grid type wind-solar photovoltaic hybrid generate electricity system of household-use Part 1: Technology condition
- GB/T 10760.1-2003 Generator of off grid wind turbines generator system Part 1: Technical condition
International Organization for Standardization (ISO), Conditions for separation
- ISO 9905:1994 Technical specifications for centrifugal pumps - Class I
- ISO 2870:2009 Surface active agents - Detergents - Determination of anionic-active matter hydrolysable and non-hydrolysable under acid conditions
- ISO/TR 10450:1991 Industrial automation systems and integration; operating conditions for discrete part manufacturing; equipment in industrial environments
- ISO 2504:1973 Radiography of welds and vewing conditions for films; Utilization of recommended patterns of image quality indicators (I.Q.I.)
- ISO/TS 23973:2020 Liquid chromatography at critical conditions (LCCC) — Chemical heterogeneity of polyethylene oxides
- ISO 18242:2016/Amd 1:2023 Cardiovascular implants and extracorporeal systems — Centrifugal blood pumps — Amendment 1: Worst-case conditions for testing
Professional Standard - Chemical Industry, Conditions for separation
- HG/T 3913-2006 Specification for high speed centrifugal pump
- HG/T 2482-1993 Gas phase steady flow valve technical conditions
- HG/T 4380-2012 Specification for solid-liquid mini-hydrocyclone
- HG/T 3135-1998 Technical conditions of fully automatic sodium ion exchanger
- HG/T 2266-1992 Specifications for Centrifugal Compressors Used in Oil Refining and Chemical Industry
- HG/T 5106-2016 Standard specifications of gas-liquid mini-cyclone for chemical process
- HG/T 3134-2007 Specification of bed equipment for ion exchange water treatment
- HG/T 2639-1994 Specifications for glass-lined single-stage single-suction chemical centrifugal pumps
- HG/T 3134-1998 Specification of fluid bed equipment for sodium ion exchange water treatment
- HG/T 3183-1989 Specifications for single-stage single-suction chemical centrifugal pumps with fluoridated plastics lining
- HG/T 3183-2012 Specifications for single-stage single suction chemical centrifugal pumps with fluoridated plastics lining
European Committee for Standardization (CEN), Conditions for separation
- EN ISO 9908:1997 Technical Specifications for Centrifugal Pumps - Class III
- EN ISO 9908:1997/A1:2011 Technical specifications for centrifugal pumps - Class III - Amendment 1 (ISO 9908:1993/AMD 1:2011)
- EN ISO 9905:1997/A1:2011 Technical specifications for centrifugal pumps - Class I - Amendment 1 (ISO 9905:1994/AMD 1:2011)
- EN ISO 5199:2002 Technical Specifications for Centrifugal Pumps - Class II ISO 5199: 2002
- HD 488 S1-1987 Gassing of insulating liquids under electrical stress and ionization
- EN ISO 9905:1997/AC:2006 Technical specifications for centrifugal pumps - Class I (ISO 9905:1994)
- prEN 17763-2021 Centrifuges - Marine fuel centrifuges - Determination of particle separation performance and certified flow rate (CFR) under defined test conditions
- EN 17763:2022 Centrifuges - Marine fuel centrifuges - Determination of particle separation performance and certified flow rate (CFR) under defined test conditions
- EN ISO 9905:1997 Technical Specifications for Centrifugal Pumps - Class I Incorporating Corrigendum February 2005; ISO 9905: 1994
- prEN 24505-1992 Hardmetals; metallographic determination of porosity and uncombined carbon (ISO 4505:1978)
Professional Standard - Coal, Conditions for separation
- MT 959-2005 The technical specification of the remotely initiated blasting in danger face of coal(rock) and gas outburst
- MT 114-1985 Technical conditions of wear-resistant centrifugal water pumps for welding mines
- MT/T 826-1999 Single-stage corrosion and wear-resisting centrifugal pump for coal mining-Technical condition
- MT/T 774-1998 General technical conditions of mobile membrane separation nitrogen producting device for coal mine
- MT/T 774-2011 General technical conditions of mobile membrane separation nitrogen producing device for coal mine
Korean Agency for Technology and Standards (KATS), Conditions for separation
- KS B ISO 9905:2005 Technical specifications for centrifugal pumps-Class I
- KS B ISO 9908-2004(2009) Technical specifications for centrifugal pumps－Class III
- KS B ISO 9905-2005(2010) Technical specifications for centrifugal pumps－Class I
- KS B 5417-1995(2021) General specifications for photographic glass filters
- KS B ISO 10450-2004(2009) Industrial automation systems and intergration－Operating conditions for discrete part manufacturing－Equipment in industrial environments
- KS R 1172-2012 Test method of lane departure warning system for passenger car－Road and ambient test conditions and test method
- KS B ISO 2504:2002 Radiography of welds and viewing conditions for films-Utilization of recommended patterns of image quality indicators (I.Q.I.)
- KS B ISO 2504:2013 Radiography of welds and viewing conditions for films－Utilization of recommended patterns of image quality indicators (I.Q.I.)
- KS C IEC TR 60721-4-0:2022 Classification of environmental conditions — Part 4-0: Guidance for the correlation and transformation of environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068 – Intro
Professional Standard - Aerospace, Conditions for separation
- QJ 3071-1998 Plasma arc welding technical conditions
- QJ 1736-1989 General technical requirements for space visible light cameras
- QJ 1940-1990 General technical specification for separate electromagnetic induction speed sensor
- QJ 2601-1994 General technical requirements for ground guidance radar phased array antenna
- QJ 1887-1990 Specifications and methods of making photographic masters for printed circuit board production
Association Francaise de Normalisation, Conditions for separation
- NF EN ISO 6428:2003 Dessins techniques - Conditions requises pour la micrographie
- NF EN 17763:2022 Centrifugeuses - Centrifugeuses à combustible pour la marine - Détermination des performances de séparation des particules et du débit certifié (CFR) dans des conditions d'essai définies
- NF X15-015:1973 MEASUREMENT OF RELATIVE HUMIDITY BY MEANS OF ELECTROLYTIC HYGROMETERS.
- NF X11-685:1983
- NF X45-200:1995 Ions separation in liquid phase. Polymeric ion exchange membranes. Characterisation and test methods of homopolar membranes.
- NF EN IEC 62561-3:2023 Composants des systèmes de protection contre la foudre (CSPF) - Partie 3 : exigences pour les éclateurs d'isolement
- NF Z68-080:1991 Industrial automation systems and integration - operating conditions for discrete part manufacturing - Equipment in industial environments
- NF EN 12224:2002 Géotextiles et produits apparentés - Détermination de la résistance au vieillissement dû aux conditions climatiques
- NF EN 60034-18-22:2001 Machines électriques tournantes - Partie 18-22 : évaluation fonctionnelle des systèmes d'isolation - Procédures d'essai pour enroulement à fils - Classification des modifications et des substitutions de composants d'isolation
- XP P18-462:2012 Testing hardened concrete - Chloride ions migration accelerated test in non-steady-state conditions - Determining the apparent chloride ions diffusion coefficient
- NF M82-305:1981 Conditions techniques applicables au matériel électrique - Transformateurs auxiliaires monophasés des coffrets du fond.
- NF UTE C93-525:1988 Components for Electronic Equipment
Flexible ribbon cables
Relevant Article Sheets
Group Standards of the People's Republic of China, Conditions for separation
- T/CPIA 0014-2019 Insulation strips for photovoltaic modules
- T/GDBX 016-2019 Footwear Machines - Peeling Strength Tester - Specification
- T/CGMA 0201-2021 Guide vane controller of centrifugal fans – Technical specification
- T/CSAE 282-2022 Technical requirement of intelligent clutch system for commercial vehicles
- T/CFA 020311.1-2019 General technical specifications for centrifugal ductile iron pipe mold
- T/CEC 344-2020 Specifications for wireless phase measuring devices
- T/ZJCX 0022-2022 Specifications of steam heaters for air separation plants
- T/CEC 397-2020 Specifications for silver plating of electrical contacts of open disconnector switches
- T/CEC 123-2016 General specification for circuit breaker phase selection controller
- T/WWDX 001-2019 Technical conditions of YE2 series three-phase asynchronous motors
- T/CASMES 106-2022 General specification for automatic skid-mounted oil and gas processing and separation device
- T/SSEA 0082-2020 Non-quenched and tempered dual-phase cold heading steel wire rod for high-strength fasteners
- T/CEEIA 404-2019 Technical requirements for nuclear power plant 10 kV medium voltage three phase asynchronous motor
- T/CAMS /CICEIA111-2022 General specification of starting lithium ion battery for general gasoline engine
- T/SHMA 4-2023 General technical requirements for lithium-ion batteries for electric light two-wheeled vehicles
Professional Standard - Medicine, Conditions for separation
Professional Standard - Automobile, Conditions for separation
- QC/T 66-1993 Motorcycle Clutch Specifications
- QC/T 777-2007 Specifications for automobile electromagnetic fan clutch
- QC/T 25-2014 Technical specification of automobile clutch
- QC/T 25-2004 Technical specification of automobile clutch
- QC/T 747-2006 Specifications of viscous fan clutch for automotive engines
- QC/T 806-2008 Technical specincation of electromagnetic clutch for compressor of A/C
- QC/T 25-1992 Technical Specifications for Automobile Dry Friction Clutch Assembly (Internal Issue)
- QC/T 812-2009 Specifications and test methods for oil separator for crankcase ventilation of diesel engine
机械工业部, Conditions for separation
- JB 6101-1992 Technical conditions of electromagnetic separation drum
- JB 5902-1992 Technical conditions for oxygen pipelines used in air separation equipment
ESDU - Engineering Sciences Data Unit, Conditions for separation
NL-NEN, Conditions for separation
Shandong Provincial Standard of the People's Republic of China, Conditions for separation
- DB37/T 2803-2016 General technical requirements for dust-proof isolation net
- DB37/T 1943-2011 General technical requirements for lithium-ion secondary battery cells
- DB37/T 4244-2020 General technical specification for livestock and poultry manure solid-liquid separator
- DB37/T 1944-2011 General Technical Specifications for Lithium Iron Phosphate Cathode Material (for Li-ion Batteries)
Professional Standard - Aviation, Conditions for separation
- HBm 65.4-1987 Specifications for Minivan Clutch
- HBm 65.5-1987 Assembly technical conditions for clutches of miniature trucks
- HB 6145-1988 General specifications for isolated fuel tanks of aircraft hydraulic systems
- HB 6151-1988 General specifications for non-isolated fuel tanks of aircraft hydraulic systems
- HB 6113-1986 General technical requirements for three-phase asynchronous gyro motors
- HBm 70-1988 General specification for single-phase motors for refrigeration compressors
Professional Standard-Ships, Conditions for separation
- CB/T 3488-1992 Specifications for Marine Centrifugal Sewage Pumps
- CB 3363-1991 General specification for marine centrifugal dredge pump
- CBM 2219-1982 Specifications for marine horizontal self-priming centrifugal pumps
- CB/T 3869-1999 Oily water separating equipment.Sheathed electric heater specification
- CB/T 3904-1999 Specification of cast iron on centrifugal casting cylinder liners for medium and high power diesel engines
Professional Standard - Electricity, Conditions for separation
- DL 479-1992 Technical conditions for static distance protection device
- DL/T 1314-2013 Technical condition of sustained release ion grounding device in power engineering
- DL/T 486-2000 Specifications for HV AC disconnectors and earthing switches
- DL/T 1516-2016 General technical conditions for relative dielectric loss and capacitance testers
- DL/T 1058-2007 Technical specification of composite Insulators spacer between phase for a.c.overhead lines
- DL/T 1058-2016 Technical specification of polymer phase to phase spacer for a.c. overhead lines
中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Conditions for separation
Anhui Provincial Standard of the People's Republic of China, Conditions for separation
- DB34/T 2708-2016 Technical Conditions of Campus Remote Attendance Machine
- DB34/T 4102-2022 Storage safety technical conditions for waste lithium-ion traction batteries
International Telecommunication Union (ITU), Conditions for separation
CZ-CSN, Conditions for separation
NATO - North Atlantic Treaty Organization, Conditions for separation
- AMEDP-8.1-2013 DOCUMENTATION RELATIVE TO INITIAL MEDICAL TREATMENT AND EVACUATION (ED A; VER 1)
- STANAG 1067-1977 Standardization of Signals to Indicate Conditions of Entry into or Exit from a Controlled Port (ED 3 AMD 1; To obtain please contact your national Defense Standardization Office or the NATO Standardization Office website: http:/ so.nato.int so@ Phone: +32
Professional Standard - Public Safety Standards, Conditions for separation
American Society for Testing and Materials (ASTM), Conditions for separation
- ASTM E349-06(2014) Standard Terminology Relating to Space Simulation
- ASTM G42-96(2003) Standard Test Method for Cathodic Disbonding of Pipeline Coatings Subjected to Elevated Temperatures
- ASTM G42-96 Standard Test Method for Cathodic Disbonding of Pipeline Coatings Subjected to Elevated Temperatures
- ASTM G42-11 Standard Test Method for Cathodic Disbonding of Pipeline Coatings Subjected to Elevated Temperatures
- ASTM E312-06 Standard Practice for Description and Selection of Conditions for Photographing Specimens Using Analog (Film) Cameras and Digital Still Cameras (DSC)
- ASTM E1140-95(2000) Standard Practice for Testing Nitrogen/Phosphorus Thermionic Ionization Detectors for Use In Gas Chromatography
HU-MSZT, Conditions for separation
Hebei Provincial Standard of the People's Republic of China, Conditions for separation
- DB13/T 1826-2013 Technical specification for automobile clutch slave cylinder assembly
Sichuan Provincial Standard of the People's Republic of China, Conditions for separation
- DB51/T 2339-2017 Technical conditions of livestock and poultry manure solid-liquid separator
Professional Standard - Grain, Conditions for separation
- LS/T 3525-1993 General technical specification for horizontal rotating white rice separating sieve
- LS/T 3524-1993 General technical conditions of horizontal rotary paddy-rough separation sieve
Professional Standard - Nuclear Industry, Conditions for separation
- EJ/T 854-1994 General technical conditions of NC type gas centrifuge
- EJ/T 734-1992 Technical specification for water-cooled reactor nuclear grade ion exchange resin
Professional Standard - Education, Conditions for separation
- JY 97-1982 Technical conditions for smooth muscle isolation (trial)
Professional Standard - Agriculture, Conditions for separation
- SB/T 10245-1995 General technical conditions of horizontal rotary paddy-rough separation sieve
- LS/T 3525-1995 General technical specification for horizontal rotating white rice separating sieve
- SB/T 10246-1995 General technical specification for horizontal rotating white rice separating sieve
- LS/T 3524-1995 General technical conditions of horizontal rotary paddy-rough separation sieve
Zhejiang Provincial Standard of the People's Republic of China, Conditions for separation
- DB3309/T 73-2020 Classes of meteorological conditions for berthing and unberthing ships in the port area
工业和信息化部, Conditions for separation
- QC/T 777-2017 Automobile electromagnetic fan clutch technical conditions
- JB/T 11204-2020 Technical specifications of silicone oil fan clutch for internal combustion engines
- JB/T 13393-2018 Digital camera touch screen technical conditions
- QC/T 1098-2018 Technical specifications of powder metallurgy disc hub for automobile clutch
- JB/T 13406-2018 Technical conditions of integrated honeycomb seal for centrifugal compressor
- JC/T 822-2017 Technical specifications of centrifugal forming machines for cement products industry
- QC/T 1094-2018 General technical conditions for lithium-ion batteries for motorcycle starters
- JB/T 2224-2018 Technical conditions of large three-phase four-pole synchronous motor
- JB/T 13703-2019 General technical conditions for digital camera moving images
- JB/T 13609-2018 Technical specifications for electronic switches for starting single-phase motors
- JB/T 14302-2022 Photographic machinery packaging, transportation, storage conditions and test methods
- JB/T 13381-2018 Technical specifications of marine variable frequency speed-adjustable three-phase asynchronous motors
Japanese Industrial Standards Committee (JISC), Conditions for separation
- JIS P 8220-3:2020 Pulps -- Laboratory wet disintegration -- Part 3: Disintegration of mechanical pulps at greater than 85 degree C
- JIS B 1812:2013 Glossary of terms relating to chains, sprockets and accessories
- JIS B 1812:2015 Glossary of terms relating to chains, sprockets and accessories
- JIS K 7652:1994 Photography -- Density measurements -- Part 2: Geometric conditions for transmission density
- JIS B 7105:1975 Method for marking distance scales of photographic lenses
- JIS F 7131:2001 Shipbuilding -- Distance pieces for ship's hull
Professional Standard - Post and Telecommunication, Conditions for separation
- YD/T 1318-2004 Technical condition of 1310nm/1550nm single fiber bi-directional assembly (module) for short reach
- YD/T 621-1993 2048, 8448, 34368, 139264Kbit/s phase jitter analyzer technical conditions
Professional Standard - Business, Conditions for separation
- SB/T 10269-1996 Professional conditions and technical requirements for photograph industry opening
AT-ON, Conditions for separation
- ONORM C 9020-1997 Ion exchange resins for water treatment - Technical conditions for delivery
- OENORM EN 17763-2021 Centrifuges - Marine fuel centrifuges - Determination of particle separation performance and certified flow rate (CFR) under defined test conditions
Professional Standard - Railway, Conditions for separation
- TB/T 2853-1997 25Hz phase sensitive track circuit technical conditions
- TB/T 2455-1993 Technical conditions for plasma arc cutting of rolling stock
- TB/T 2383-1993 Specifications for centrifugal cooling water pumps for diesel locomotives
- TB/T 2906-1998 Technical conditions for ion nitriding of diesel locomotive engine valves
- TB/T 3197-2008 Specification of automatic on-board control netural-section passing system
- TB/T 2245-1991 Specifications for Radiography of Steel Fusion Welded Butt Joints
- TB/T 1608-2001 Basic technical specifications of three-phase asynchronous motors for rolling stock
Professional Standard - Petroleum, Conditions for separation
- SY/T 5191-1993 Specifications for Gas Chromatography Logging Tool
- SY 6044-1994 Emergency evacuation conditions for shallow sea oil workers
Hubei Provincial Standard of the People's Republic of China, Conditions for separation
- DB42/ 245-2003 General technology requirement on the one-off protective clothes
Professional Standard - Forestry, Conditions for separation
Professional Standard - Electron, Conditions for separation
- SJ 1780-1981 Ordinary two-electrode sputtering ion pump--Performance specification
- SJ 1624-1980 Generic specification for ferrite isolators and circulators intended for applications at microwave frequency
- SJ/T 10311-1992 Generic specification of low Pressure Chemical vapor Deposition system
Professional Standard - Building Materials, Conditions for separation
- JC/T 879-2001 Technical condition centrifugal ventilator for cement industry
- JC/T 879-2011 Centrifugal verntilator technical condition for cement industry
- JC/T 822-2003 Technical regulation of centrifugal machine for cement products industry
Professional Standard - Speciality, Conditions for separation
- ZB B97021-1987 Cyclone Separator Manufacture and Acceptance Technical Conditions
中国石油天然气总公司, Conditions for separation
- SY/T 6044-1994 Emergency evacuation conditions for shallow sea oil operators
ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Conditions for separation
- ASHRAE KC-03-11-1-2003 Analysis and Validation of Particle Separation Efficiency in a Centrifugal Field Under Laminar and Perfect Mixing Conditions
SAE - SAE International, Conditions for separation
- SAE J1864-1987 METHOD FOR EVALUATING MATERIAL SEPARATION IN AUTOMOTIVE SEALERS UNDER PRESSURE IN STATIC CONDITIONS
- SAE J885-1964 Human Tolerance to Impact Conditions as Related to Motor Vehicle Design
- SAE J885-1986 Human Tolerance to Impact Conditions as Related to Motor Vehicle Design@ Information Report
- SAE J885-2011 Human Tolerance to Impact Conditions as Related to Motor Vehicle Design
- SAE J885-1980 Human Tolerance to Impact Conditions as Related to Motor Vehicle Design
Society of Automotive Engineers (SAE), Conditions for separation
- SAE J1864-1993 METHOD FOR EVALUATING MATERIAL SEPARATION IN AUTOMOTIVE SEALERS UNDER PRESSURE IN STATIC CONDITIONS
- SAE J885-2003 Human Tolerance to Impact Conditions as Related to Motor Vehicle Design
- SAE J885A-1966 HUMAN TOLERANCE TO IMPACT CONDITIONS AS RELATED TO MOTOR VEHICLE DESIGN
British Standards Institution (BSI), Conditions for separation
- BS EN 17763:2022 Centrifuges. Marine fuel centrifuges. Determination of particle separation performance and certified flow rate (CFR) under defined test conditions
- 21/30441619 DC BS EN 17763. Centrifuges. Marine fuel centrifuges. Determination of particle separation performance and certified flow rate (CFR) under defined test conditions
- PD IEC TR 60721-4-1:2002 Classification of environmental conditions - Guidance for the correlation and transformation of environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068: Storage
- PD IEC TR 60721-4-4:2002 Classification of environmental conditions - Guidance for the correlation and transformation of environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068: Stationary use at non-weatherprotected locations
- PD IEC TR 60721-4-2:2002 Classification of environmental conditions. Guidance for the correlation and transformation of environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068. Transportation
- PD CEN ISO/TS 23973:2021 Liquid chromatography at critical conditions (LCCC). Chemical heterogeneity of polyethylene oxides
- BS EN ISO 2870:2009 Surface active agents - Detergents - Determination of anionic-active matter hydrolysable and non-hydrolysable under acid conditions
- BS PAS 777:2013 Specification for the qualification and labelling of used automotive engines and any related transmission units
- PD IEC/TR 61000-1-7:2016 Electromagnetic compatibility (EMC). General. Power factor in single-phase systems under non-sinusoidal conditions
- PD IEC TR 60721-4-7:2002 Classification of environmental conditions. Guidance for the correlation and transformation of environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068. Portable and non-stationary use
German Institute for Standardization, Conditions for separation
- DIN EN 17763:2022-12 Centrifuges - Marine fuel centrifuges - Determination of particle separation performance and certified flow rate (CFR) under defined test conditions; German version EN 17763:2022
- DIN EN 17763:2022 Centrifuges - Marine fuel centrifuges - Determination of particle separation performance and certified flow rate (CFR) under defined test conditions
- DIN 51817:2014-08 Testing of lubricants - Determination of oil separation from greases under static conditions
- DIN 19633:1986 Ion exchange resins for water treatment; technical delivery conditions
- DIN 58970-2:1982 Laboratory centrifuges; centrifuge tubes for relative centrifugal acceleration up to 4000
- DIN EN 10271:1998 Electrolytically zinc-nickel (ZN) coated steel flat products - Technical delivery conditions; German version EN 10271:1998
- DIN 51817:1998 Testing of lubricants - Determination of oil separation from greases under static conditions
- DIN 51817:2014 Testing of lubricants - Determination of oil separation from greases under static conditions
- DIN 4512-9:1993 Photographic sensitometry, determination of optical density; spectral conditions
- DIN 19585:1976 Sewage fittings; technical specifications for delivery for fittings from cast iron, concrete and concrete in connection with cast iron
- DIN ISO 7796:1986-07 Skis; geometry; measuring conditions; identical with ISO 7796, edition 1985
- DIN 4512-10:1993 Photographic sensitometry, determination of optical density; geometric conditions for reflection density
- DIN EN 60444-2:1997 Measurement of quartz crystal unit parameters by zero phase technique in a pi-network - Part 2: Phase offset method for measurement of motional capacitance of quartz crystal units (IEC 60444-2:1980); German version EN 60444-2:1997
ES-UNE, Conditions for separation
- UNE-EN 17763:2023 Centrifuges - Marine fuel centrifuges - Determination of particle separation performance and certified flow rate (CFR) under defined test conditions
Professional Standard - Light Industry, Conditions for separation
- QB/T 1443-1992 Technical conditions of ZBY type liquid medicine centrifugal pump for papermaking
Guangdong Provincial Standard of the People's Republic of China, Conditions for separation
- DB44/T 921-2011 General technical requirements for lithium ion battery winding equipment
- DB44/T 1202-2013 Technical specifications for lithium-ion power battery systems for electric vehicles
ES-AENOR, Conditions for separation
Chongqing Provincial Standard of the People's Republic of China, Conditions for separation
- DB50/T 207-2005 Motorcycle and moped automatic centrifugal clutch (wet) technical specification
Professional Standard - Military and Civilian Products, Conditions for separation
- WJ 1593-1984 Camera Surface Finishing Specifications for Nickel Coatings for Cameras
- WJ 1592-1984 Camera Surface Finishing Specifications for Camera Black Chrome Plating
- WJ 1595-1984 Technical specification of copper and copper alloy purification film layer for camera surface finishing
RO-ASRO, Conditions for separation
- STAS 1480-1986 PLASTER PLATES AND STRIPS FOR SEPARATION WALES
- STAS 2614/22-1990 Househeld and similar electric apliances. Electrical vacuum cleanears. Safety special technical requirements
SE-SIS, Conditions for separation
- SIS SMS 2513-1974 Freezers for household use. Freezing test corresponding to storage conditions
Jilin Provincial Standard of the People's Republic of China, Conditions for separation
- DB22/T 1929-2013 Specifications of automatic clutch control system for passenger cars
YU-JUS, Conditions for separation
- JUS Z.S0.005-1982 Safety signs. Information signs concemingsafe condition
- JUS N.M2.120-1989 Safety requirements. Spin extracting. P, rticular technical conditicms and tests
- JUS H.N8.190-1989 Testing of paper and board. Jfeasurenent of hygroexpans ivity. Eygroexpansivity up to a maximiBi relative humidity of 68 %
ITU-R - International Telecommunication Union/ITU Radiocommunication Sector, Conditions for separation
International Electrotechnical Commission (IEC), Conditions for separation
- IEC TR 60721-4-0:2002 Classification of environmental conditions - Part 4-0: Guidance for the correlation and transformation of environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068; Introduction
- IEC TR 60721-4-1:2001 Classification of environmental conditions - Part 4-1: Guidance for the correlation and transformation of environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068; Storage
- IEC TR 60721-4-1:2001/AMD1:2003 Classification of environmental conditions - Part 4-1: Guidance for the correlation and transformation of environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068; Storage; Amendment 1
- IEC TR 60721-4-2:2001/AMD1:2003 Classification of environmental conditions - Part 4-2: Guidance for the correlation and transformation of environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068; Transportation; Amendment 1
- IEC TR 60721-4-1:2003 Classification of environmental conditions - Part 4-1: Guidance for the correlation and transformation of environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068; Storage
- IEC TR 60721-4-2:2003 Classification of environmental conditions - Part 4-2: Guidance for the correlation and transformation of environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068; Transportation
- IEC TR 60721-4-6:2001/AMD1:2003 Classification of environmental conditions - Part 4-6: Guidance for the correlation and transformation of environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068; Ship environment; Amendment 1
Canadian Standards Association (CSA), Conditions for separation
- CSA N290.14-07-2007 Qualification of pre-developed software for use in safety-related instrumentation and control applications in nuclear power plants
GM Holden Ltd, Conditions for separation
GM North America, Conditions for separation
Tianjin Provincial Standard of the People's Republic of China, Conditions for separation
- DB12/T 475-2012 Technical requirements for lithium-ion power storage batteries for electric vehicles
- DB12/T 1182-2023 Meteorological and sea state condition grades for ships berthing and departing in sea area of Tianjin Port
轻工业部, Conditions for separation
- QB 1184-1991 Technical conditions of lifting tooth fork crank of GC15 type free-speed lock sewing machine
机械电子工业部, Conditions for separation
- JB 1009-1991 YS series three-phase asynchronous motor technical conditions
- JB 5330-1991 Vibration source three-phase asynchronous motor technical conditions
- JB 5797-1991 Technical specifications for general-purpose marine three-phase asynchronous motors
American National Standards Institute （ANSI), Conditions for separation
- ANSI/TIA/EIA 455-50B-1998 Light Launch Conditions for Long Length Graded-Index Optical Fiber Spectral Attenuation Measurements
- ANSI/TAPPI T402 sp-2013 Standard conditioning and testing atmospheres for paper, board, pulp handsheets, and related products
未注明发布机构, Conditions for separation
- SAE J885-201102 HUMAN TOLERANCE TO IMPACT CONDITIONS AS RELATED TO MOTOR VEHICLE DESIGN
Military Standard of the People's Republic of China-General Armament Department, Conditions for separation
- GJB 812-1990 General technical conditions for marine three-phase asynchronous motors
- GJB 75-1985 General technical conditions for marine three-phase synchronous generators
BE-NBN, Conditions for separation
- NBN 238-1953
- NBN I-967-1969
- NBN T 63-125-1980 Surface active agents - Detergents -Anionic-active matter hydrolyzable under alkaline conditions - Determination of hydrolyzable and non-hydrolyzable anionic active matter
European Committee for Electrotechnical Standardization（CENELEC）, Conditions for separation
- HD 546.2.1 S1-1991 Telecontrol Equipment and Systems Part 2: Operating Conditions Section One - Environmental Conditions and Power Supplies
国家市场监督管理总局、中国国家标准化管理委员会, Conditions for separation
- GB/T 37762-2019 General specification for synchronous condenser unit protection equipment
- GB/T 22473.1-2021 Batteries used for energy storage—Part 1: Photovoltaic off-grid application technical conditions
邮电部, Conditions for separation
- YD/T 615-1993 64, 2048, 8448, 34368kbit/s phase jitter tester technical conditions
National Aeronautics and Space Administration (NASA), Conditions for separation
- NASA-CR-1316-1969 A theoretical analysis of the free vibration of discretely stiffened cylindrical shells with arbitrary end conditions
Standard Association of Australia （SAA）, Conditions for separation
AENOR, Conditions for separation
BR-ABNT, Conditions for separation
PL-PKN, Conditions for separation
- PN C04860-04-1990 ?on exchange resins Testing methods Column for determination of exchange ' capacities under dynamie conditions
Fujian Provincial Standard of the People's Republic of China, Conditions for separation
- DB35/T 968-2009 Technical conditions for energy-saving three-phase oil-immersed distribution transformers
Professional Standard - Rare Earth, Conditions for separation
- XB/T 619-2015 Chemical analysis methods of ion type rare earth ore.Determination of total rare earth ion phase
Lithuanian Standards Office , Conditions for separation
- LST ISO 6395:2008 Earth-moving machinery - Determination of sound power level - Dynamic test conditions (ISO 6395:2008, identical)
KR-KS, Conditions for separation
- KS C IEC TR 60721-4-0-2022 Classification of environmental conditions — Part 4-0: Guidance for the correlation and transformation of environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068 – Intro
CO-ICONTEC, Conditions for separation
U.S. Military Regulations and Norms, Conditions for separation
TIA - Telecommunications Industry Association, Conditions for separation
- 455-50A-1987 FOTP-50 Light Launch Conditions for Long-Length Graded-Index Optical Fiber Spectral Attenuation Measurements
- TIA/EIA-455-50B-1998 FOTP-50 Light Launch Conditions for Long-Length Graded-Index Optical Fiber Spectral Attenuation Measurements