ZH
RU
ES

The principle of oil content in water

The principle of oil content in water, Total:439 items.

In the international standard classification, The principle of oil content in water involves: Petroleum products in general, Crude petroleum, Water quality, Analytical chemistry, Fuels, Shipbuilding and marine structures in general, Insulating materials, Insulating fluids, Non-metalliferous minerals, Extraction and processing of petroleum and natural gas, Raw materials for rubber and plastics, Products of the chemical industry, Paint ingredients, Lubricants, industrial oils and related products, Fruits. Vegetables, Organic chemicals, Measurement of volume, mass, density, viscosity, Tobacco, tobacco products and related equipment, Wood, sawlogs and sawn timber, Equipment for petroleum and natural gas industries, Animal feeding stuffs, General methods of tests and analysis for food products, Edible oils and fats. Oilseeds, Cereals, pulses and derived products, Road engineering, Road vehicles in general, Waxes, bituminous materials and other petroleum products, Linear and angular measurements, Spices and condiments. Food additives, Soil quality. Pedology, Wastes, Paints and varnishes, Nuclear energy engineering, Plastics, Non-ferrous metals, Metrology and measurement in general, Powder metallurgy, Construction materials, Surface treatment and coating, Structures of buildings.

PL-PKN, The principle of oil content in water

PN C04105-1990 Crude petroleum Determination of paraffin content
PN C04087-1989 Crude petroleum and petroleum products Determination contens of water and sediment by the centrifuge method
PN C04288-12-1987 Technical fats Methods of testing Determination of water content
PN C04195-1992 Petroleum products Determination of lead content in gasoline by atomie absorption spectrometry
PN R66163-1962 Determination of the water contents in the oil-seeds, cakes and schats
PN C04570-09-1987 Water and wa"te water Tests for metals by atomie absorption spectrometry Determination of Cr(VI) and Cr(III)
PN E04419-02-1991 Electrical insulating materials Determination of water in mineral insulating oils by the Karl Fischer method
PN A86787-1991 Raw materials and products of fish and aquatic invertebrates.Determination of cadmium content flame atomic absorption spectrometric method
PN A86788-1993 Raw materials and products of fish and aquatic invertebrates. Determination of lead content flame atomic absorption spectrometric method

国家质量监督检验检疫总局, The principle of oil content in water

SN/T 4435-2016 Determination of water content in crude oil by hydride reaction method
SN/T 4438-2016 Determination of methanol content in crude oil by multidimensional gas chromatography
SN/T 4429.1-2016 Determination of total mercury content in crude oil by gold amalgam cold atomic absorption spectrometry
SN/T 4429.2-2016 Determination of total mercury content in crude oil by Zeeman-corrected cold atomic absorption spectrometry

Professional Standard - Petroleum, The principle of oil content in water

SY/T 0537-2008 The test method of wax content in crude oil
SY 0537-2008 Determination of Wax Content in Crude Oil
SY/T 5402-2008 Crude petoleum determination of water.Electric dehydration method
SY 5402-2016 Determination of Water Content in Crude Oil by Electrodesorption
SY/T 0528-1993 Determination of Trace Arsenic in Crude Oil by Atomic Absorption Spectrometry
SY/T 0528-2008 Determination of arsenic in crude petroleum.Atomic fluorescence spectrometry
SY/T 7550-2000 Determination of wax,resins and asphaltenes contents in crude oil
SY/T 7550-2012 Determination of wax, resins and asphaltenes in crude oil
SY 7550-2012 Determination of Wax, Colloid and Asphaltene Content in Crude Oil
SY/T 7550-2004 Determination method of wax, colloid and asphaltenes in crude oil
SY/T 6242-1996 Gas Chromatography Analysis Method of Oleaginous Colloid Wax Content in Crude Oil
SY/T 0530-1993 Spectrophotometric method for the determination of oil content in oilfield sewage
SY/T 0530-2011 Determination of oil content in oilfield produced water.Spectrophotometry method
SY 0530-2011 Spectrophotometric method for determination of oil content in oilfield produced water

API - American Petroleum Institute, The principle of oil content in water

API MPMS TR 2570-2010 Continuous On-line Measurement of Water Content in Petroleum (Crude Oil and Condensate) (First Edition)
API PUBL 4702-2001 Technologies to Reduce Oil and Grease Content of Well Treatment@ Well Completion@ and Workover Fluids for Overboard Disposal
API H00005-2000 Manual of Petroleum Measurement Standards - Draft Standard - Sediment and Water - Continuous On-Line Measurement of Water Content in Petroleum and Petroleum Products (First Edition)
API MPMS 10.2-1981 Manual of Petroleum Measurement Standards Chapter 10 - Sediment and Water Section 2 - Determination of Water in Crude Oil by the Distillation Method
API RP 87-2007 Recommended Practice for Field Analysis of Crude Oil Samples Containing from Two to Fifty Percent Water by Volume (FIRST EDITION)
API PUBL 4149-1972 The Migration of Petroleum Products in Soil and Ground Water PRINCIPLES AND COUNTERMEASURES (Reprinted in 1986)
API MPMS 10.2-2013 Manual of Petroleum Measurement Standards Chapter 10.2 Standard Test Method for Water in Crude Oil by Distillation (THIRD EDITION)
API MPMS 10.2-2016 Manual of Petroleum Measurement Standards Chapter 10.2 Standard Test Method for Water in Crude Oil by Distillation (FOURTH EDITION)
API MPMS 10.4-1970 Manual of Petroleum Measurement Standards Chapter 10-Sediment and Water Section 4-Standard Methods of Test for Water and Sediment in Crude Oils
API MPMS 10.2-2007 Manual of Petroleum Measurement Standards Chapter 10 - Sediment and Water Section 2 - Standard Test Method for Water in Crude Oil by Distillation (SECOND EDITION)
API MPMS 10.8-2005 Manual of Petroleum Measurement Standards Chapter 10-Sediment and Water Section 8-Standard Test Method for Sediment in Crude Oil by Membrane Filtration (Second Edition)
API MPMS 10.1-1981 Manual of Petroleum Measurement Standards Chapter 10 - Sediment and Water Section 1 - Determination of Sediment in Crude Oils and Fuel Oils by the Extraction Method (ASTM D 473)
API MPMS 10.4-1999 Manual of Petroleum Measurement Standards Chapter 10 - Sediment and Water Section 4 - Determination of Water and/or Sediment in Crude Oil by the Centrifuge Method (Field Procedure) (Third Edition)
API MPMS 10.3-1981 Manual of Petroleum Measurement Standards Chapter 10 - Sediment and Water Section 3 - Determination of Water and Sediment in Crude Oil by the Centrifuge Method (Laboratory Procedure) (ASTM D4007)
API MPMS 10.9-1993 Manual of Petroleum Measurement Standards Chapter 10 - Sediment and Water Section 9 - Standard Test Method for Water in Crude Oils by Coulometric Karl Fischer Titration
API MPMS 10.9-2013 Manual of Petroleum Measurement Standards Chapter 10.9 Standard Test Method for Water in Crude Oils by Coulometric Karl Fischer Titration (Third Edition)
API MPMS 10.3-2008 Manual of Petroleum Measurement Standards Chapter 10—Sediment and Water Section 3—Standard Test Method for Water and Sediment in Crude Oil by the Centrifuge Method (Laboratory Procedure) (THIRD EDITION)
API MPMS 10.4-1988 Manual of Petroleum Measurement Standards Chapter 10 - Sediment and Water Section 4 - Determination of Sediment and Water in Crude Oil by the Centrifuge Method (Field Procedure) (ASTM D96-88) (R 1993)
API MPMS 10.4-2013 Manual of Petroleum Measurement Standards Chapter 10.4 Determination of Water and/or Sediment in Crude Oil by the Centrifuge Method (Field Procedure) (Fourth Edition; ERTA 03/2015)
API MPMS 10.3-2013 Manual of Petroleum Measurement Standards Chapter 10.3 Standard Test Method for Water and Sediment in Crude Oil by the Centrifuge Method (Laboratory Procedure) (FOURTH EDITION)
API MPMS 10.1-2002 Manual of Petroleum Measurement Standards Chapter 10 - Sediment and Water@ Section 1 - Standard Test Method for Sediment in Crude Oils and Fuel Oils by the Extraction Method (Second Edition)
API MPMS 10.7-2002 Manual of Petroleum Measurement Standards Chapter 10—Sediment and Water Section 7—Standard Test Method for Water in Crude Oils by Potentiometric Karl Fischer Titration (Second Edition)
API MPMS 10.9-2002 Manual of Petroleum Measurement Standards Chapter 10 - Sediment and Water Section 9 - Standard Test Method for Water in Crude Oils by Coulometric Karl Fischer Titration (Second Edition)
API MPMS 10.1-2007 Manual of Petroleum Measurement Standards Chapter 10 - Sediment and Water@ Section 1 - Standard Test Method for Sediment in Crude Oils and Fuel Oils by the Extraction Method (THIRD EDITION)
API MPMS 10.3-2003 Manual of Petroleum Measurement Standards Chapter 10 - Sediment and Water Section 3 - Standard Test Method for Water and Sediment in Crude Oil by the Centrifuge Method (Laboratory Procedure) (Second Edition)

SE-SIS, The principle of oil content in water

SIS SS-ISO 9029:1992 Crude petroleum — Determination of water — Distillation method
SIS SS 02 81 45-1991 Determination ofoilin water — Infrared spectrophotometric method
SIS SS 02 81 01-1992 Nitrogen content of water — Determination with Kjeldahl method after reduction with Devarda's alloy
SIS SS IEC 814:1986 Insulating oils - Determination of water in insulating liquids by automatic coulometric Karl Fischer titration
SIS SS 02 81 87-1986 Metal content of biological material determined by atomic absorption spectrometry — Digestion
SIS SS 02 81 60-1982 Metal content of water determined bv atomic absorption spectroscopy, atomization in fiame — Special guidelines for sodium and potassium
SIS SS 02 81 50-1980 Metal content of water, sludge and sediment determined by atomic absorption spectroscopy, atomization in flame — General principies and guide/ines
SIS SS 02 81 83-1986 Metal content of water, sludge and sediment - Determined by flameless atomic absorption spectrometry - Electrothermal atomization in a graphite furnace - General principles and guidelines
SIS SS 02 81 57-1980 Metal content of water, sludge and sediment determined by atomic absorption spectroscopy, atomization in flame — Special guidelines for manganese
SIS SS 02 81 73-1985 Metal content of water, sludge and sediment determined by atomic absorption spectroscopy, atomization in flame — Special guidelines for chromium
SIS SS 02 81 51-1980 Metal content of water, sludge and sediment determined by atomic absorption spectroscopy, atomization in flame — Special guidelines for aluminum
SIS SS 02 81 75-1989 Metal content of water, sludge and sediment determined by flameless atom/c absorption spectrometry — Special guidelines for mercury
SIS SS 02 81 49-1980 Metal content of water, sludge and sediment determined by atomic absorption spectroscopy, atomization in flame — Solvent extraction
SIS SS 02 81 61-1982 Meta! content of water determined by atomic absorption spectroscopy, atomization in flame - Special guidelines for calcium and magnesium

Japanese Industrial Standards Committee (JISC), The principle of oil content in water

JIS K 2275:1996 Crude oil and petroleum products -- Determination of water content
JIS B 7995:1994 Automatic analysers for sulphur in crude oil and petroleum products
JIS K 2275-1:2015 Crude petroleum and petroleum products -- Determination of water -- Part 1: Distillation method
JIS K 2275-4:2015 Crude petroleum and petroleum products -- Determination of water -- Part 4: Hydride reaction method
JIS K 2275-2:2015 Crude petroleum and petroleum products -- Determination of water -- Part 2: Potentiometric Karl Fischer titration method
JIS K 2275-3:2015 Crude petroleum and petroleum products -- Determination of water -- Part 3: Coulometric Karl Fischer titration method

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, The principle of oil content in water

GB/T 8929-1988 Grude oil--Determination of water--Distillation method
GB/T 8929-2006 Crude petroleum.Determination of water.Distillation method
GB/T 11146-1999 Crude oils--Determination of water--Karl fischer reagent method
GB/T 25104-2010 Crude oil-automatic determination of water-RF method
GB/T 6532-2012 Test method for salt in crude oils (Potentiometric method)
GB/T 18608-2001 Standard test methods for determination of iron, nickel,sodium,and vanadium in crude oil by atomic absorption spectrometry
GB/T 12152-2007 Water for boiler and cooling system.Determination of mineral oil
GB/T 18608-2012 Determination of nickel, vanadium, iron, and sodium in crude oils and residual fuels by flame atomic absorption spectrometry
GB/T 11146-2009 Crude petroleum.Determination of water.Coulometric Karl Fischer titration method
GB/T 26986-2011 Crude petroleum.Determination of water.Potentiometric Karl Fischer titration method
GB/T 18612-2001 Determination of organic chloride content in crude oil by combustion and microcoulometry
GB/T 8020-2015 Determination of Lead Content in Gasoline by Atomic Absorption Spectrometry
GB/T 17674-2012 Determination of nitrogen in crude oil by boat-inlet chemiluminescence
GB/T 17674-1999 Determination of nitrogen in petroleum and petroleum products by chemiluminescence method
GB/T 17606-1998 Determination of sulfur in crude-oil by energy-dispersive X-ray fluorescence spectroscopy
GB/T 17606-2009 Determination of sulfur in crude-oil by energy-dispersive X-ray fluorescence spectrometry
GB/T 7600-1987 Determination of water content in transformer oils in service by coulometric method
GB/T 14638.2-1993 Scale in industrial circulating cooling water--Determi copper--Atomic absorption spectrometry
GB/T 7600-2014 Determination of water content in transformer oils and turbine oils in service by coulometric method
GB/T 14638.1-1993 Industrial circulating cooling water--Determination of copper--Atomic absorption spectrometry
GB/T 14639-1993 Industrial circulating cooling water--Determination of magnesium--Atomic absorption spectrometry
GB/T 14640-1993 Industrial circulating cooling water--Determination of potassium--Atomic absorption spectrometry
GB/T 14641-1993 Industrial circulating cooling water--Determination of sodium--Atomic absorption spectrometry
GB/T 14637.1-1993 Industrial circulating cooling water--Determination of zinc--Atomic absorption spectrometry
GB/T 14636-1993 Industrial circulating cooling water--Determination of calcium--Atomic absorption spectrometry
GB/T 14636-2007 Industrial circulating cooling water.Determination of calcium,magnesium.Atomic absorption spectrometric method
GB/T 11133-2015 Standard test method for determination of water in petroleum products, lubricating oils, and additives.Coulometric Karl Fischer titration method
GB/T 16634-1996 Industrial circulating cooling water--Determination of zinc for phosphorus-zinc prefilming fluid--Atomic absorption spectrometric method
GB/T 16635-1996 Industrial circulating cooling water--Determination of calcium for phosphorus-zinc prefilming fluid--Atomic absorption spectrometric method
GB/T 23524-2009 Test method of spent petrochemical catalyst.Determination of platinum.Inductively coupled plasma atomic emission spectrometry
GB/T 23256-2009 Petroleum liquids.Automatic pipeline sampling.Statistical assessment of performance of automatic samplers determining the water content in hydrocarbon liquids

国家能源局, The principle of oil content in water

SY/T 5402-2016 Determination of water content in crude oil by electrodeposition method
NB/SH/T 0986-2019 Determination of total oxygen content in gasoline, diesel and methanol fuels - reduction cracking method
SH/T 0923-2016 Determination of elemental content in insulating oil by inductively coupled plasma atomic emission spectrometry

AT-ON, The principle of oil content in water

ONORM DIN 10317-1993 Determination of water content of butter
ONORM DIN 10322-1993 Determination of water content, solids-not-fat and fat contents of butter on the same test portion - Reference method
ONORM L 1063-1988 Physical investigations of soils; determination of the relation pressure potential versus water content of undisturbed soil samples

Association Francaise de Normalisation, The principle of oil content in water

NF EN ISO 9029:1995 Pétrole brut - Détermination de la teneur en eau - Méthode de distillation.
NF ISO 9030:2000 Pétrole brut - Détermination de la teneur en eau et en sédiments - Méthode par centrifugation
NF C27-229:1985 Determination of water in insulating oils, and in oil-impregnated paper and pressboard.
NF M07-023:1969 Liquid fuels. Determination of chlorides in crude petroleum and petroleum products.
NF M07-104:2000 Émulsions eau dans gazole - Détermination de la teneur en eau - Méthode de Karl Fischer
NF T60-706-1:1997 FAT AND OIL DERIVATIVES. VEGETABLE OILS METHYL ESTERS. ALKALINE METAL CONTENT. PART 1 : DETERMINATION OF SODIUM CONTENT BY ATOMIC ABSORPTION SPECTROMETRY.
NF T60-706-2:1997 FAT AND OIL DERIVATIVES. VEGETABLE OILS METHYL ESTERS. ALKALINE METAL CONTENT. PART 2 : DETERMINATION OF POTASSIUM CONTENT BY ATOMIC ABSORPTION SPECTROMETRY.
NF ISO 3734:2000 Produits pétroliers - Détermination de la teneur en eau et en sédiments dans les fuel-oils résiduels - Méthode par centrifugation
NF V03-767-1*NF EN ISO 16634-1:2008 Food products - Determination of the total nitrogen content by combustion according to the Dumas principle and calculation of the crude protein content - Part 1 : oilseeds and animal feeding stuffs.
NF T60-640:2018 Petroleum products - Lubricants - Determination of water content in highly additivated oils - Titration by reaction with calcium hydride
NF EN ISO 16634-1:2008 Produits alimentaires - Détermination de la teneur en azote total par combustion selon le principe Dumas et calcul de la teneur en protéines brutes - Partie 1 : graines oléagineuses et aliments des animaux
NF EN 16135:2012 Carburants pour automobiles - Détermination de la teneur en manganèse dans les essences sans plomb - Méthode par spectrométrie d'absorption atomique de flamme (FAAS)
NF T75-451:2003 Oils of bergamot, lemon, citron and lime, fully or partially reduced in bergapten - Determination of bergapten content by high-pressure liquid chromatography (HPLC).
NF EN 1014-4:2010 Produits de préservation du bois - Créosote et bois créosoté - Méthodes d'échantillonnage et d'analyse - Partie 4 : détermination de la teneur en phénols extractibles à l'eau de la créosote
NF T72-070-3*NF EN 1014-3:2010 Wood preservatives - Creosote and creosoted timber - Methods of sampling and analysis - Part 3 : determination of the Benzo(a)pyrene content of creosote.
NF P18-650-5*NF EN 1097-5:2008 Tests for mechanical and physical properties of aggregates - Part 5 : determination of the water content by drying in a ventilated oven
NF T72-070-4*NF EN 1014-4:2010 Wood preservatives - Creosote and creosoted timber - Methods of sampling and analysis - Part 4 : determination of the water-extractable phenols content of creosote.
NF T72-073:1995 Wood preservatives. Creosote and creosoted timber. Methods of sampling and analysis. Part 4 : determination of the water-extractable phenols content of creosote.

American Society for Testing and Materials (ASTM), The principle of oil content in water

ASTM D4006-07 Standard Test Method for Water in Crude Oil by Distillation
ASTM D4006-81(2000)e1 Standard Test Method for Water in Crude Oil by Distillation
ASTM D4006-81(2005) Standard Test Method for Water in Crude Oil by Distillation
ASTM D4377-00(2011) Standard Test Method for Water in Crude Oils by Potentiometric Karl Fischer Titration
ASTM D3230-06 Standard Test Method for Salts in Crude Oil (Electrometric Method)
ASTM D3230-05a Standard Test Method for Salts in Crude Oil (Electrometric Method)
ASTM D3230-05 Standard Test Method for Salts in Crude Oil (Electrometric Method)
ASTM D3230-99 Standard Test Method for Salts in Crude Oil (Electrometric Method)
ASTM D3230-99(2004) Standard Test Method for Salts in Crude Oil (Electrometric Method)
ASTM D3230-08 Standard Test Method for Salts in Crude Oil (Electrometric Method)
ASTM D3230-09 Standard Test Method for Salts in Crude Oil (Electrometric Method)
ASTM D7679-10 Standard Test Method for Sulfur Content in Carbon Black Feedstock Oils
ASTM D7679-16(2020) Standard Test Method for Sulfur Content in Carbon Black Feedstock Oils
ASTM D7662-15(2020) Standard Test Method for Carbon Content in Carbon Black Feedstock Oils
ASTM D3230-13 Standard Test Method for Salts in Crude Oil (Electrometric Method)
ASTM D7662-13 Standard Test Method for Carbon Content in Carbon Black Feedstock Oils
ASTM D7662-15 Standard Test Method for Carbon Content in Carbon Black Feedstock Oils
ASTM D7679-16 Standard Test Method for Sulfur Content in Carbon Black Feedstock Oils
ASTM D7679-13 Standard Test Method for Sulfur Content in Carbon Black Feedstock Oils
ASTM D3230-10 Standard Test Method for Salts in Crude Oil (Electrometric Method)
ASTM D7662-10 Standard Test Method for Carbon Content in Carbon Black Feedstock Oils
ASTM D7662-11 Standard Test Method for Carbon Content in Carbon Black Feedstock Oils
ASTM D4929-99 Standard Test Methods for Determination of Organic Chloride Content in Crude Oil
ASTM D4929-04 Standard Test Methods for Determination of Organic Chloride Content in Crude Oil
ASTM D4929-15a Standard Test Methods for Determination of Organic Chloride Content in Crude Oil
ASTM D4377-00(2006) Standard Test Method for Water in Crude Oils by Potentiometric Karl Fischer Titration
ASTM D4377-00e1 Standard Test Method for Water in Crude Oils by Potentiometric Karl Fischer Titration
ASTM D4377-00 Standard Test Method for Water in Crude Oils by Potentiometric Karl Fischer Titration
ASTM D4929-19a Standard Test Method for Determination of Organic Chloride Content in Crude Oil
ASTM D4929-99e1 Standard Test Methods for Determination of Organic Chloride Content in Crude Oil
ASTM D4929-19 Standard Test Method for Determination of Organic Chloride Content in Crude Oil
ASTM D4929-17 Standard Test Method for Determination of Organic Chloride Content in Crude Oil
ASTM D4929-22 Standard Test Method for Determination of Organic Chloride Content in Crude Oil
ASTM D4929-07(2014) Standard Test Methods for Determination of Organic Chloride Content in Crude Oil
ASTM D4929-16 Standard Test Method for Determination of Organic Chloride Content in Crude Oil
ASTM D4929-15 Standard Test Methods for Determination of Organic Chloride Content in Crude Oil
ASTM D3237-97 Standard Test Method for Lead In Gasoline By Atomic Absorption Spectroscopy
ASTM D4929-07 Standard Test Methods for Determination of Organic Chloride Content in Crude Oil
ASTM F1779-97(2003) Standard Practice for Reporting Visual Observations of Oil on Water
ASTM F1779-97 Standard Practice for Reporting Visual Observations of Oil on Water
ASTM F1779-08 Standard Practice for Reporting Visual Observations of Oil on Water
ASTM F1779-08(2014) Standard Practice for Reporting Visual Observations of Oil on Water
ASTM F3606-22 Standard Guide for Additive Manufacturing — Feedstock Materials — Testing Moisture Content in Powder Feedstock
ASTM D4191-97 Standard Test Method for Sodium in Water by Atomic Absorption Spectrophotometry
ASTM D4192-97 Standard Test Method for Potassium in Water by Atomic Absorption Spectrophotometry
ASTM D3237-06 Standard Test Method for Lead in Gasoline by Atomic Absorption Spectroscopy
ASTM D3237-02 Standard Test Method for Lead In Gasoline By Atomic Absorption Spectroscopy
ASTM D8150-22 Standard Test Method for Determination of Organic Chloride Content in Crude Oil by Distillation Followed by Detection Using Combustion Ion Chromatography
ASTM D3237-12 Standard Test Method for Lead in Gasoline by Atomic Absorption Spectroscopy
ASTM D4573-22 Standard Test Method for Rubber Chemicals—Determination of Oil Content in Oil-Treated Sulfur
ASTM D5349-95(2006) Standard Test Method for Determination of the Moisture and Volatile Content of Sulfonated and Sulfated Oils by Hot-Plate Method
ASTM D5349-95 Standard Test Method for Determination of the Moisture and Volatile Content of Sulfonated and Sulfated Oils by Hot-Plate Method
ASTM D5349-95(2001) Standard Test Method for Determination of the Moisture and Volatile Content of Sulfonated and Sulfated Oils by Hot-Plate Method
ASTM D4191-03 Standard Test Method for Sodium in Water by Atomic Absorption Spectrophotometry
ASTM D4191-08 Standard Test Method for Sodium in Water by Atomic Absorption Spectrophotometry
ASTM D4191-15 Standard Test Method for Sodium in Water by Atomic Absorption Spectrophotometry
ASTM D4192-15 Standard Test Method for Potassium in Water by Atomic Absorption Spectrophotometry
ASTM D5348-95(2006) Standard Test Method for Determination of the Moisture Content of Sulfonated and Sulfated Oils by Distillation with Xylene
ASTM D5348-95 Standard Test Method for Determination of the Moisture Content of Sulfonated and Sulfated Oils by Distillation with Xylene
ASTM D5348-95(2001) Standard Test Method for Determination of the Moisture Content of Sulfonated and Sulfated Oils by Distillation with Xylene
ASTM D4931-92(2002) Standard Test Method for Gross Moisture in Green Petroleum Coke
ASTM D4931-92(1997) Standard Test Method for Gross Moisture in Green Petroleum Coke
ASTM D4931-06 Standard Test Method for Gross Moisture in Green Petroleum Coke
ASTM D4931-06(2011) Standard Test Method for Gross Moisture in Green Petroleum Coke
ASTM D3237-17 Standard Test Method for Lead in Gasoline by Atomic Absorption Spectroscopy
ASTM D4573-03(2018) Standard Test Method for Rubber Chemicals—Determination of Oil Content in Oil-Treated Sulfur
ASTM D3831-98 Standard Test Method for Manganese In Gasoline By Atomic Absorption Spectroscopy
ASTM D3831-01 Standard Test Method for Manganese In Gasoline By Atomic Absorption Spectroscopy
ASTM D3831-01(2006) Standard Test Method for Manganese in Gasoline By Atomic Absorption Spectroscopy
ASTM D3831-12 Standard Test Method for Manganese in Gasoline By Atomic Absorption Spectroscopy
ASTM D5622-95(2005) Standard Test Methods for Determination of Total Oxygen in Gasoline and Methanol Fuels by Reductive Pyrolysis
ASTM D5622-95(2011) Standard Test Methods for Determination of Total Oxygen in Gasoline and Methanol Fuels by Reductive Pyrolysis
ASTM D4928-00(2005) Standard Test Methods for Water in Crude Oils by Coulometric Karl Fischer Titration
ASTM D4928-00e1 Standard Test Methods for Water in Crude Oils by Coulometric Karl Fischer Titration
ASTM D4928-00 Standard Test Methods for Water in Crude Oils by Coulometric Karl Fischer Titration
ASTM D4928-11 Standard Test Method for Water in Crude Oils by Coulometric Karl Fischer Titration
ASTM D4928-00(2010) Standard Test Methods for Water in Crude Oils by Coulometric Karl Fischer Titration
ASTM D5348-95(2012) Standard Test Method for Determination of the Moisture Content of Sulfonated and Sulfated Oils by Distillation with Xylene
ASTM D95-99 Standard Test Method for Water in Petroleum Products and Bituminous Materials by Distillation
ASTM D95-99e1 Standard Test Method for Water in Petroleum Products and Bituminous Materials by Distillation
ASTM D5622-16 Standard Test Methods for Determination of Total Oxygen in Gasoline and Methanol Fuels by Reductive Pyrolysis
ASTM D4928-12 Standard Test Method for Water in Crude Oils by Coulometric Karl Fischer Titration
ASTM D5863-00 Standard Test Methods for Determination of Nickel, Vanadium, Iron, and Sodium in Crude Oils and Residual Fuels by Flame Atomic Absorption Spectrometry
ASTM D5863-00a Standard Test Methods for Determination of Nickel, Vanadium, Iron, and Sodium in Crude Oils and Residual Fuels by Flame Atomic Absorption Spectrometry
ASTM D5863-00a(2005) Standard Test Methods for Determination of Nickel, Vanadium, Iron, and Sodium in Crude Oils and Residual Fuels by Flame Atomic Absorption Spectrometry
ASTM D5863-00a(2011) Standard Test Methods for Determination of Nickel, Vanadium, Iron, and Sodium in Crude Oils and Residual Fuels by Flame Atomic Absorption Spectrometry
ASTM D3635-13 Standard Test Method for Dissolved Copper In Electrical Insulating Oil By Atomic Absorption Spectrophotometry
ASTM D7590-09 Standard Guide for Measurement of Remaining Primary Antioxidant Content In In-Service Industrial Lubricating Oils by Linear Sweep Voltammetry
ASTM D7590-09e1 Standard Guide for Measurement of Remaining Primary Antioxidant Content In In-Service Industrial Lubricating Oils by Linear Sweep Voltammetry
ASTM D95-05 Standard Test Method for Water in Petroleum Products and Bituminous Materials by Distillation
ASTM D95-05e1 Standard Test Method for Water in Petroleum Products and Bituminous Materials by Distillation
ASTM D95-13 Standard Test Method for Water in Petroleum Products and Bituminous Materials by Distillation
ASTM D95-23 Standard Test Method for Water in Petroleum Products and Bituminous Materials by Distillation
ASTM D3561-02(2007)e1 Standard Test Method for Lithium, Potassium, and Sodium Ions in Brackish Water, Seawater, and Brines by Atomic Absorption Spectrophotometry
ASTM D3561-96 Standard Test Method for Lithium, Potassium, and Sodium Ions in Brackish Water, Seawater, and Brines by Atomic Absorption Spectrophotometry
ASTM D3561-02 Standard Test Method for Lithium, Potassium, and Sodium Ions in Brackish Water, Seawater, and Brines by Atomic Absorption Spectrophotometry
ASTM D4663-10 Standard Test Method for Polyurethane Raw Materials Determination of Hydrolyzable Chlorine of Isocyanates
ASTM D3635-01(2005) Standard Test Method for Dissolved Copper In Electrical Insulating Oil By Atomic Absorption Spectrophotometry
ASTM D3635-01 Standard Test Method for Dissolved Copper In Electrical Insulating Oil By Atomic Absorption Spectrophotometry
ASTM D3635-90(1998) Standard Test Method for Dissolved Copper In Electrical Insulating Oil By Atomic Absorption Spectrophotometry
ASTM D4563-02(2022) Standard Test Method for Determination by Atomic Absorption Spectroscopy of Titanium Dioxide Content of Pigments Recovered From Whole Paint
ASTM D3986-11 Standard Test Method for Barium in Brines, Seawater, and Brackish Water by Direct-Current Argon Plasma Atomic Emission Spectroscopy
ASTM D6071-14(2022) Standard Test Method for Low Level Sodium in High Purity Water by Graphite Furnace Atomic Absorption Spectroscopy
ASTM D4834-88(1998) Standard Test Method for Detection of Lead in Paint by Direct Aspiration Atomic Absorption Spectroscopy
ASTM D6304-04 Standard Test Method for Determination of Water in Petroleum Products, Lubricating Oils, and Additives by Coulometric Karl Fisher Titration
ASTM D6304-04ae1 Standard Test Method for Determination of Water in Petroleum Products, Lubricating Oils, and Additives by Coulometric Karl Fisher Titration
ASTM D6304-04a Standard Test Method for Determination of Water in Petroleum Products, Lubricating Oils, and Additives by Coulometric Karl Fisher Titration
ASTM D6304-04e1 Standard Test Method for Determination of Water in Petroleum Products, Lubricating Oils, and Additives by Coulometric Karl Fisher Titration
ASTM B963-08 Standard Test Methods for Oil Content, Oil-Impregnation Efficiency, and Interconnected Porosity of Sintered Powder Metallurgy (PM) Products Using Archimedesx2019; Principle
ASTM B963-11 Standard Test Methods for Oil Content, Oil-Impregnation Efficiency, and Interconnected Porosity of Sintered Powder Metallurgy (PM) Products Using Archimedesx2019; Principle
ASTM D3561-11 Standard Test Method for Lithium, Potassium, and Sodium Ions in Brackish Water, Seawater, and Brines by Atomic Absorption Spectrophotometry
ASTM D6304-07 Standard Test Method for Determination of Water in Petroleum Products, Lubricating Oils, and Additives by Coulometric Karl Fischer Titration
ASTM D6304-03 Standard Test Method for Determination of Water in Petroleum Products, Lubricating Oils, and Additives by Coulometric Karl Fisher Titration
ASTM D8150-17 Standard Test Method for Determination of Organic Chloride Content in Crude Oil by Distillation Followed by Detection Using Combustion Ion Chromatography
ASTM D6304-00 Standard Test Method for Determination of Water in Petroleum Products, Lubricating Oils, and Additives by Coulometric Karl Fisher Titration
ASTM B963-14 Standard Test Methods for Oil Content, Oil-Impregnation Efficiency, and Surface-Connected Porosity of Sintered Powder Metallurgy 40;PM41; Products Using Archimedesrsquo; Principle
ASTM E2119-16 Standard Practice for Quality Systems for Conducting In Situ Measurements of Lead Content in Paint or Other Coatings Using Field-Portable X-Ray Fluorescence (XRF) Devices
ASTM D5095-91(2007) Standard Test Method for Determination of the Nonvolatile Content in Silanes, Siloxanes and Silane-Siloxane Blends Used in Masonry Water Repellent Treatments
ASTM D5095-91(1997)e1 Standard Test Method for Determination of the Nonvolatile Content in Silanes, Siloxanes and Silane-Siloxane Blends Used in Masonry Water Repellent Treatments
ASTM D5095-91(2002) Standard Test Method for Determination of the Nonvolatile Content in Silanes, Siloxanes and Silane-Siloxane Blends Used in Masonry Water Repellent Treatments

Professional Standard - Commodity Inspection, The principle of oil content in water

SN/T 2782-2011 Electrometric method for determination of salt content in crude oil
SN/T 3016-2011 Determination of mercury content in naphtha. Cold atomic absorption spectrometry
SN/T 2725-2010 Determination of sodium,potassium and iron content in coal tar oil and anthracene oil.Atomic absorption spectrometric method
SN/T 3185-2012 Determination of halogen in crude oil.Oxygen bomb combustion-ion chromatography
SN/T 3234-2012 Determination of arsenic and lead content in condensate oil.Graphite furnace atomic absorption spectrometry
SN/T 1410-2004 Determination of lead content in naphtha--Graphite furnace atomic absorption spectrometric method
SN/T 3015-2011 Determination of arsenic content in naphtha. Graphite furnace atomic absorption spectrometry
SN/T 1830-2006 Determination of calcium, iron, nickel, sodium in petroleum coke. Atomic absorption spectrometry (AAS)
SN/T 4024-2013 Determination of sodium, potassium and vanadium content in coal tar oil and anthracene oil.Inductively coupled plasma atomic emission spectrometry
SN/T 3301-2012 Determination of manganese,iron,lead in gasoline.Inductively coupled plasma atomic emission spectrometry(ICP-AES)
SN/T 0513-1995 Natural wintergreen oil for export.Determination of methyl salicylate content--Gas chromatographic method
SN/T 3025-2011 Wood preservatives.Creosote,creosoted timber and wooden product.Methods of sampling and analysis.Determination of the benzo[a] pyrene content of creosote

Korean Agency for Technology and Standards (KATS), The principle of oil content in water

KS M 2112-2011 Crude petroleum and petroleum products-Determination of nitrogen content
KS M ISO 9114-2003(2008) Crude petroleum－Determination of water content by hydride reaction－Field method
KS M ISO 9114:2003 Crude petroleum-Determination of water content by hydride reaction-Field method
KS M ISO 9114:2013 Crude petroleum－Determination of water content by hydride reaction－Field method
KS M ISO 3734:2011 Petroleum products－Determination of water and sediment in residual fuel oils－Centrifuge method
KS M ISO 11223-1:2003 Petroleum and liquid products-Direct static measurements-Contents of vertical storage tanks-Part 1:Mass measurement by hydrostatic tank gauging
KS M ISO 10478:2003 Petroleum products－Determination of aluminium and silicon in fuel oils－Inductively coupled plasma emission and atomic absorption spectroscopy methods
KS M ISO 8691:2008 Petroleum products-Low levels of vanadium in liquid fuels-Determination by flameless atomic absorption spectrometry after ashing
KS M ISO 8691:2013 Petroleum products－Low levels of vanadium in liquid fuels－Determination by flameless atomic absorption spectrometry after ashing
KS M ISO 3856-7-2007(2017) Paints and varnishes－Determination of “soluble” metal content－Part 7：Determination of mercury content of the pigment portion of the paint and of the liquid of water-dilutable paints－Flameless atomic a

国家市场监督管理总局、中国国家标准化管理委员会, The principle of oil content in water

GB/T 25104-2019 Automatic measurement of water content in crude oil—RF method
GB/T 17674-2021 Determination of nitrogen in crude oil—Boat-inlet chemiluminescence
GB/T 3780.26-2018 Carbon black—Part 26：Determination of carbon content in carbon black feedstock oils
GB/T 37883-2019 Determination of chromium, cadmium, lead and arsenic in water treatment chemicals—Inductively coupled plasma atomic emission spectrometry

Professional Standard-Ships, The principle of oil content in water

CB 3328.5-1988 Inspection method for water quality of discharge water from ship sewage treatment——Examination method for oil content in water
CB* 3328.5-1988 Method for inspecting quality of water discharged from treatment of vessel sewage. Method of test for oil content in water
CB/T 3328.5-2013 Test method for waste water quality of ship sewage treatment.Part5: Oil content in water

国家石油和化学工业局, The principle of oil content in water

SY/T 7550-1999 Determination of wax, gum and asphaltene content in crude oil

CZ-CSN, The principle of oil content in water

CSN 83 0917-1977 Protection of water against petroleum matters. Oily water eewerage and treatment
CSN 83 0521 Cast.5-1976 Determination of tars in phenol waste waters
CSN 83 0571-1963 Determination of tars in phenol waste waters
CSN 49 0103-1979 Wood. Determination of moisture content at physical and mechanical testing
CSN ISO 3846-6:1994 Paints and varnishes. Determination of ?soluble" metal content Part 6: Determination of total chromium content of the liquid portion of the paint — Flame atomic absorption spectrometric method

AR-IRAM, The principle of oil content in water

IRAM 6552-1953

International Organization for Standardization (ISO), The principle of oil content in water

ISO 9030:1990 Crude petroleum; determination of water and sediment; centrifuge method
ISO 3734:1976 Crude petroleum and fuel oils; Determination of water and sediment; Centrifuge method
ISO 16634-1:2008 Food products - Determination of the total nitrogen content by combustion according to the Dumas principle and calculation of the crude protein content - Part 1: Oilseeds and animal feeding stuffs
ISO 5666-2:1983 Water quality; Determination of total mercury by flameless atomic absorption spectrometry; Part 2: Method after pretreatment with ultraviolet radiation
ISO 3856-7:1984 Paints and varnishes; Determination of "soluble" metal content; Part 7 : Determination of mercury content of the pigment portion of the paint and of the liquid portion of water-dilutable paints; Flameless atomic absorption spectrometric method
ISO 11125-7:1993 Preparation of steel substrates before application of paints and related products; test methods for metallic blast-cleaning abrasives; part 7: determination of moisture
ISO 11125-7:2018 Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 7: Determination of moisture

Professional Standard - Petrochemical Industry, The principle of oil content in water

SH/T 0711-2002 Standard test method for manganese in gasoline by atomic absorption spectroscopy
SH/T 0712-2002 Standard test method for iron in gasoline by atomic absorption spectroscopy
SH/T 0061-1991 Determination of magnesium content in lubricating oil (atomic absorption spectrometry)
SH/T 0077-1991 Determination of iron content in lubricating oil (atomic absorption spectrometry)
SH/T 0617-1995 Determination of lead content in lubricating oil (atomic absorption spectrometry)
SH/T 0605-1994 Determination of molybdenum content in lubricating oil (atomic absorption spectrometry)
SH/T 0246-1992 Determination of Water Content in Light Petroleum Products (Electrometry)
SH/T 0240-1992 Method for Determination of Alkanes and Naphthenes Content in Reformed Feedstock Oil (Chromatographic Method)
SH/T 0228-1992 Determination of barium, calcium and zinc content in lubricating oil (atomic absorption spectrometry)
SH/T 0472-1992 Determination of trace metal content in synthetic aviation lubricating oil (atomic absorption method)
SH/T 0605-2008 Standard test method for determination of molybdenum in lubricant and additive by atomic absorption spectrometry(AAS)
SH/T 0582-1994 Sodium Content Determination in Lubricating Oils and Additives (Atomic Absorption Spectrometry)
SH/T 0412-1992 Determination of n-paraffin content in liquid paraffin and its raw oil (chromatographic method)
SH/T 0102-1992 Determination of copper content in lubricating oils and liquid fuels (atomic absorption spectrometry)
SH/T 0715-2002 Standard test method for determination of nickel, vanadium, and iron in crude oils and residual fuels by inductively coupled plasma (ICP) atomic emission spectrometry
SH/T 0166-1992 Determination of C₆~C₉ aromatics content in reformed feedstock oil and produced oil (gas chromatography)
NB/SH/T 0824-2010 Standard test method for determination of additive elements in lubricating oils by inductively coupled plasma atomic emission spectrometry
SH/T 0706-2001 Petroleum products-Determination of aluminium and silicon in fuel oils-Inductively coupled plasma emission and atomic absorption spectroscopy methods
SH/T 0239-1992 Determination of C₆~C₉alkanes, cycloalkanes and aromatics in reformed feedstock oil and its produced oil (thin-layer packed column chromatography)

Professional Standard - Energy, The principle of oil content in water

NB/SH/T 0711-2019 Determination of Manganese Content in Gasoline by Atomic Absorption Spectrometry
NB/T 11264-2023
NB/SH/T 0923-2016 Determination of element content in insulating oil by inductively coupled plasma atomic emission spectrometry

IN-BIS, The principle of oil content in water

International Electrotechnical Commission (IEC), The principle of oil content in water

IEC 60733:1982 Determination of water in insulating oils, and in oil-impregnated paper and pressboard

中国石油化工总公司, The principle of oil content in water

SH/T 0167-1992 Determination of arsenic content in reformed feed oil (spectrophotometric method)

YU-JUS, The principle of oil content in water

JUS B.H8.082-1996 Petroleum and petroleum products - Determination of lead content in gasoline - Atomic absorbtion spectrometric method
JUS E.K8.035-1991 Aaimal and vegetable fats and oils. Determlnation of noisture and volatile matter content in emulslons

RU-GOST R, The principle of oil content in water

GOST 21216.6-1993 Clay raw materials. Method for determination of calcium and magnesium in water extract
GOST 21216.7-1993 Clay raw materials. Method for determination of chlorine ions in water extract
GOST 33733-2016 Crude oil. Determination of water content coulometric Karl Fischer titration method
GOST R 50279.9-1992 Paints and varnishes. Test methods of metal content. Determination of "soluble" mercury content of the pigment portion of the paint and of the liquid portion of waterdelutable paints. Flameless atomic absorption spectrometric method
GOST 14618.6-1978 Essential oils, aromatics and their intermediates. Determination of water content
GOST 1594-1969 Apparatus for quantitative determination of water content in petroleum, food and other products. Specifications
GOST R ISO 3734-2009 Petroleum products. Determination of water and sediment content in residual fuel oils by centrifuge method
GOST R ISO 16634-1-2011 Food products. Determination of the total nitrogen content by combustion according to the Dumas principle and calculation of the crude protein content. Part 1. Oilseeds and animal feeding stuffs
GOST R 50279.8-1992 Paints and varnishes. Test methods of metal content. Determination of total "soluble" chromium content of the liquid portion of paint. Flame atomic absorbtion spectrometric method
GOST 19728.14-2001 Talc and talcomagnesite. Method for determination of sulphate ions in water extract
GOST 19728.14-1974 Talc and talcmagnesite. Method for determination of sulphate ions in water extract
GOST 8.624-2013 State system for ensuring the traceability of measurements. Laboratory water in crude oil analyzers. Verification method

ES-AENOR, The principle of oil content in water

UNE 53-636-1991 Rubber and latex. Determination of copper content. Photometric method
UNE 104-281 Pt.1-8-1990
UNE 34-228-1981
UNE 55-813-1984
UNE 64 030

Taiwan Provincial Standard of the People's Republic of China, The principle of oil content in water

CNS 13874-1997 Method of test for determination of nickel`6isodium and vanadium-Atomic absorption spectroscopic method
CNS 8161-1981 Method of Test for Essential Oil Content in Perfume (for Cosmetic)
CNS 8998-1982 Method of Test for Copper in Industrial Waste Water - Atomic Absorption Spectrophotometric Method
CNS 13875-1997 Method of test for aluminum and silicon in fuel oils by ashing,fusion,inductively coupled plasma atomic emission spectrometry and atomic absorption spectrometry

Professional Standard - Chemical Industry, The principle of oil content in water

HG/T 3527-2008 Industrial circulating cooling water.Determination of mineral oil
HG 5-1596-1985 Determination method of oil content in industrial circulating cooling water
HG/T 3527-1985 Determination method of oil content in industrial circulating cooling water
HG/T 4325-2012 Reclaimed water.Determination of calcium and magnesium.Atomic absorption spectromic method
HG/T 4326-2012 Reclaimed water.Determination of nickel,copper,zinc,cadmium and lead.Atomic absorption spectromic method
HG/T 4656-2014 Textile dyeing and finishing auxiliaries.Determination of fluorine content of fluorocarbon water and oil repellent agent
HG/T 4552.2-2013 Method for the measurement tin-content in spent tin-stripping solution.Part 2:Atomic absorption spectrophotometry method

Shaanxi Provincial Standard of the People's Republic of China, The principle of oil content in water

DB61/T 947-2014 Determination of Fatty Acid Methyl Esters in Biodiesel Feed Oil by Gas Chromatography

RO-ASRO, The principle of oil content in water

STAS 12607-1988 SLUDGES RESULTED FROM TREATMENT OF SURFACE WATERS AND WASTE WATERS PURIFICATION Content determination of extractable substances in petroleum ether
STAS SR 8965-2-1995 Water and steam from the boiler installations Copper content determination. Atomic absorption spectrometrical method
STAS 12200-1985 SLUDGES RESULTED FROM= SURFACE WATERS TREATMENT AND WASTE WATERS PURIFI- CATION Nitrogen content determination
STAS SR 13225-1995 Sludges resulting from the surface waters treatment and used waters purding. Determination of the lead content. Spectrometric method of atomic absorption.

Group Standards of the People's Republic of China, The principle of oil content in water

T/SDAQI 064-2021 Determination of urea content in diesel engines NOx reduction agent - Aqueous urea solution by refractive index
T/CEEIA 319-2018 Nondestructive method to test the moisture content of insulation paper for oil-immersed bushing
T/COCIA 14-2021 Determination of Chlorogenic Acid Content in Toothpaste of Oral Cleaning and Nursing Products by High Performance Liquid Chromatography
T/LNWTA 009-2021 Standard for chromium ion content in brine for water treatment agent and diaphragm electrolysis to prepare sodium hypochlorite and chlor alkali
T/ZLJYXH 3-2023
T/NAIA 0139-2022 Diesel engine nitrogen oxide reducing agent urea aqueous solution (AUS 32) Determination of urea content Automatic Kjeldahl method
T/SDAQI 063-2021 Determination of Ca,Fe,Cu,Zn,Cr,Ni,Al,Mg,Na,K and P Content in diesel engines NOx reduction agent - Aqueous urea solution by ICP-OES method

Professional Standard - Agriculture, The principle of oil content in water

NY/T 2013-2011 Determination of essential oil in citrus fruits and derived products
水产品质量安全检验手册 2.3.3.0-2005 Chapter 2 Basic analysis methods for physical and chemical testing of aquatic products Section 3 Determination of moisture content in aquatic products (GBT 5009.3-2003) 3. Distillation method
水产品质量安全检验手册 2.3.2.0-2005 Chapter 2 Basic analysis methods for physical and chemical testing of aquatic products Section 3 Determination of moisture content in aquatic products (GBT 5009.3-2003) 2. Reduced pressure drying method
水产品质量安全检验手册 2.3.1.0-2005 Chapter 2 Basic Analysis Methods for Physical and Chemical Testing of Aquatic Products Section 3 Determination of Moisture Content in Aquatic Products (GBT 5009.3-2003) 1. Direct drying method

Indonesia Standards, The principle of oil content in water

SNI 7969-2014
SNI 2490-2008 Testing methodes for water content of asphalt and material contain asphalt by using of destilation method

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, The principle of oil content in water

GB/T 33086-2016 Water treatment chemical—Determination of arsenic and mercury—Atomic fluorescence spectrometry

中国民用航空局, The principle of oil content in water

MH/T 6119-2018 Determination of viable aerobic microorganisms in fuel oil and water-containing fuel oil by thixotropic gel culture method

German Institute for Standardization, The principle of oil content in water

DIN 51400-1:1992 Testing of mineral oils and fuels; determination of the sulfur content (total sulfur); general working principles
DIN 19745:2006-10 Soil quality - Principles of the determination of the water content by Time Domain Reflectometry (TDR) and Time Domain Transmissometry (TDT)
DIN EN ISO 16634-1:2009 Food products - Determination of the total nitrogen content by combustion according to the Dumas principle and calculation of the crude protein content - Part 1: Oilseeds and animal feeding stuffs (ISO 16634-1:2008); English version of DIN EN ISO 16634-1:
DIN EN 16135:2012-02 Automotive fuels - Determination of manganese content in unleaded petrol - Flame atomic absorption spectrometric method (FAAS); German version EN 16135:2011
DIN 51400-1:2009 Testing of mineral oils and fuels - Determination of sulfur content (total sulfur) - Part 1: General working principles
DIN 51400-1:2009-04 Testing of mineral oils and fuels - Determination of sulfur content (total sulfur) - Part 1: General working principles
DIN EN ISO 16634-1:2009-07 Food products - Determination of the total nitrogen content by combustion according to the Dumas principle and calculation of the crude protein content - Part 1: Oilseeds and animal feeding stuffs (ISO 16634-1:2008); German version EN ISO 16634-1:2008
DIN 51443:1992 Testing of lubricants; determination of the boron content in lubricating oils; direct determination by Atomic Absorption Spectrometry (AAS)
DIN ISO 8691:2010-09 Petroleum products - Low levels of vanadium in liquid fuels - Determination by flameless atomic absorption spectrometry after ashing (ISO 8691:1994)
DIN EN 1014-4:2010-11 Wood preservatives - Creosote and creosoted timber - Methods of sampling and analysis - Part 4: Determination of the water-extractable phenols content of creosote; German version EN 1014-4:2010
DIN 51417-2:1997 Testing of metal working fluids - Determination of mineral oil content of water mix metal working fluids - Part 2: Column chromatography method
DIN EN 16135:2012 Automotive fuels - Determination of manganese content in unleaded petrol - Flame atomic absorption spectrometric method (FAAS); German version EN 16135:2011

British Standards Institution (BSI), The principle of oil content in water

BS ISO 10362-1:1999+A1:2011 Cigarettes. Determination of water in smoke condensates. Gas-chromatographic method
BS 2000-456:2000 Methods of test for petroleum and its products - Determination of potassium in gasoline - Atomic absorption spectrometry (AAS) method
BS 2000-455:2001 Determination of manganese in gasoline - Atomic absorption spectrometry (AAS) method
BS 2000-137:1993 Methods of test for petroleum and its products - Determination of oil content of water mix metalworking oil dilutions
BS EN 16135:2011 Automotive fuels. Determination of manganese content in unleaded petrol. Flame atomic absorption spectrometric method (FAAS)
BS 2000-455:2011 Methods of test for petroleum and its products. Determination of the manganese content of gasoline. Atomic absorption spectrometry (AAS) method
BS EN 16135:2012 Automotive fuels. Determination of manganese content in unleaded petrol. Flame atomic absorption spectrometric method (FAAS)
BS 7755-5.2:1996 Soil quality. Physical methods. Determination of water content in the unsaturated zone. Neutron depth probe method
BS 684-1.16:1981 Methods of analysis of fats and fatty oils. Physical methods. Determination of water content: entrainment method
BS DD CEN/TS 15506:2007 Foodstuffs - Determination of trace elements - Determination of tin in fruit and vegetables preserved in cans by flame atomic absorption spectrometry (AAS)
BS 2000-413:1996 Methods of test for petroleum and its products. Petroleum products. Low levels of vanadium in liquid fuels. Determination by flameless atomic absorption spectrometry after ashing
BS EN 1014-4:2010 Wood preservatives - Creosote and creosoted timber - Methods of sampling and analysis - Determination of the water-extractable phenols content of creosote
BS EN 1428:2000 Methods of test for petroleum and its products - Bitumen and bituminous binders - Determination of water content in bitumen emulsions - Azeotropic distillation method
BS 684 Sec.1.16:1981 Methods of analysis of fats and fatty oils. Physical methods. Determination of water content: entrainment method

American National Standards Institute （ANSI), The principle of oil content in water

ANSI/ASTM D3237:2002 Lead in Gasoline by Atomic Absorption Spectrometry, Method of Test for (05.02)

Danish Standards Foundation, The principle of oil content in water

DS 264:1982 Water quality. Determination of manganese in water, sludge and sediment by atomic absorption spectrophotometry in flame
DS/EN 16135:2012 Automotive fuels - Determination of manganese content in unleaded petrol - Flame atomic absorption spectrometric method (FAAS)
DS 2211:1990 Water analysis. Determination of metals in water, sludge and sediment determined by flameless atomic absorption spectrometry. Electrothermal atomization in graphite furnace. Special guidelines for Aluminium, Cadmium, Cobalt, chromium, Copper, mangane
DS 262:1982 Determination of aluminium in water, sludge and sediment by atomic absorption spectrophotometry in flame
DS 2210:1990 Water analysis. Determination of metals in water, sludge, and sedimend by flameless atomic absorption spectrometry. Electrothermal atomization in graphite furnace. General principles and guidelines
DS/EN ISO 16634-1:2009 Food products - Determination of the total nitrogen content by combustion according to the Dumas principle and calculation of the crude protein content - Part 1: Oilseeds and animal feeding stuffs
DS 238:1985 Determinbation of metal in water, sludge and sediment by atomic abosrption in flame. Special guidelines for calcium and magnesium
DS 258:1985 Determination of metal in water, sludge and sediment by atomic absorption in flame. Special guidelines for sodium and potassium
DS/EN 1014-4:2010 Wood preservatives - Creosote and creosoted timber - Methods of sampling and analysis - Part 4: Determination of the water-extractable phenols content of creosote
DS 263:1982 Water quality. Determination of metal in water, sludge and sediment by atomic absorption spectrophotometry in flam. Special guidelines for cadmium, cobalt copper, iron nickel, lead and zink

Professional Standard - Electricity, The principle of oil content in water

DL/T 1458-2015 Determination of copper, iron, aluminum and zinc contents in mineral insulating oil-Atomic absorption spectrometry method

European Committee for Standardization (CEN), The principle of oil content in water

EN ISO 16634-1:2008 Food products - Determination of the total nitrogen content by combustion according to the Dumas principle and calculation of the crude protein content - Part 1: Oilseeds and animal feeding stuffs (ISO 16634-1:2008)
EN ISO 6571:2009 Spices, condiments and herbs - Determination of volatile oil content (hydrodistillation method) (ISO 6571:2008)
EN ISO 6571:2009/A1:2017 Spices, condiments and herbs - Determination of volatile oil content (hydrodistillation method) - Amendment 1 (ISO 6571:2008/Amd 1:2017)
EN 1097-5:1999 Test for Mechanical and Physical Properties of Aggregates - Part 5: Determination of the Water Content by Drying in a Ventilated Oven
prEN 25666-2-1992 Water quality; determination of total mercury by flameless atomic absorption spectrometry; part 2: method after pretreatment with ultraviolet radiation (ISO 5666-2:1983)
EN 1014-4:2010 Wood preservatives - Creosote and creosoted timber - Methods of sampling and analysis - Part 4: Determination of the water-extractable phenols content of creosote

Lithuanian Standards Office , The principle of oil content in water

LST EN 16135-2012 Automotive fuels - Determination of manganese content in unleaded petrol - Flame atomic absorption spectrometric method (FAAS)
LST EN ISO 16634-1:2009 Food products - Determination of the total nitrogen content by combustion according to the Dumas principle and calculation of the crude protein content - Part 1: Oilseeds and animal feeding stuffs (ISO 16634-1:2008)
LST EN 1014-4-2010 Wood preservatives - Creosote and creosoted timber - Methods of sampling and analysis - Part 4: Determination of the water-extractable phenols content of creosote

AENOR, The principle of oil content in water

UNE-EN 16135:2012 Automotive fuels - Determination of manganese content in unleaded petrol - Flame atomic absorption spectrometric method (FAAS)
UNE-EN ISO 16634-1:2009 Food products - Determination of the total nitrogen content by combustion according to the Dumas principle and calculation of the crude protein content - Part 1: Oilseeds and animal feeding stuffs (ISO 16634-1:2008)
UNE-EN 1014-4:2010 Wood preservatives - Creosote and creosoted timber - Methods of sampling and analysis - Part 4: Determination of the water-extractable phenols content of creosote

American Petroleum Institute (API), The principle of oil content in water

API RP 87-2007(2017) Recommended Practice for Field Analysis of Crude Oil Samples Containing from Two to Fifty Percent Water by Volume

AASHTO - American Association of State Highway and Transportation Officials, The principle of oil content in water

T 211-1990 Standard Method of Test for Determination of Cement Content in Cement-Treated Aggregate by the Method of Titration
T211-1990 Standard Specification for Determination of Cement Content in Cement Treated Aggregate by the Method of Titration (Nineteenth Edition)

Guangxi Provincial Standard of the People's Republic of China, The principle of oil content in water

DB45/T 1246-2015 Determination of Manganese, Iron and Lead in Gasoline by Inductively Coupled Plasma-Atomic Emission Spectrometry
DB45/T 1341-2016 Determination of Sulfur Trioxide Content in Cement by Inductively Coupled Plasma-Atomic Emission Spectrometry

IT-UNI, The principle of oil content in water

未注明发布机构, The principle of oil content in water

BS 2000-455:2011(2012) Methods of test for petroleum and its products Part 455 : Determination of the manganese content of gasoline — Atomic absorption spectrometry (AAS) method
DIN EN 1014-4:1995 Wood preservatives — Creosote and creosoted timber — Methods for sampling and analysis — Part 4: Determination of the water-extractable phenols content of creosote

The American Road & Transportation Builders Association, The principle of oil content in water

AASHTO T 211-1990 Standard Method of Test for Determination of Cement Content in Cement-Treated Aggregate by the Method of Titration
AASHTO T 55-2002 Standard Method of Test for Water in Petroleum Products and Bituminous Materials by Distillation

KR-KS, The principle of oil content in water

KS M ISO 8691-2008 Petroleum products－Low levels of vanadium in liquid fuels－Determination by flameless atomic absorption spectrometry after ashing
KS M ISO 10478-2003(2023)

Professional Standard - Nuclear Industry, The principle of oil content in water

EJ/T 20168-2018 Determination of Moisture Content in Reprocessed UO3 Powder by Karl Fischer Coulometric Method

KE-KEBS, The principle of oil content in water

KS 08-264-1981 KENYA STANDARD METHODS FOR ESTIMATION OF MOISTURE. TOTAL SIZE OR FINISH, ASH. FATTY MATTER AND DETERMINATION OF WATER-SOLUBLE MATTER IN TEXTILES

NL-NEN, The principle of oil content in water

NEN 6402-1991 Water- Determination of the halogen content derived from non-volatile, with petroleum ether extractable organohalogen compounds (EOX)

HU-MSZT, The principle of oil content in water

MSZ 6943/2-1980

CU-NC, The principle of oil content in water

NC 56-54-01-1986 Unified System for Quality Indexes Nomenc1ature. Construction Materials and Products. Concrete Hollow Elements for Walls and Intermedíate Levels

Professional Standard - Non-ferrous Metal, The principle of oil content in water

YS/T 617.5-2007 Determination of chemical compositions and physical properties of aluminum powder, magnesium powder and AI-Mg alloy powder.Part 5: Determination of grease content of aluminum powder

PT-IPQ, The principle of oil content in water

NP EN 1014-3-2000 Wood preservatives Creosote and Creosoted timber-Methods of sampling and analysis Part 3:Determination of the benzo[a]pyrene content of creosote

Malaysia Standards, The principle of oil content in water

MS 133 Pt.B11-1999 Methods of test for paints and varnishes:part b11:determination of soluble mercury content of the pigment portion of the paint and of the liquid portion of water - dilutable paints - flameless atomic absorption spectrometric method