ZH

RU

ES

What technologies were tested

What technologies were tested, Total:136 items.

In the international standard classification, What technologies were tested involves: Quality, Agricultural machines, implements and equipment, Railway rolling stock, Character sets and information coding, Linear and angular measurements, Electrical and electronic testing, Alarm and warning systems, Shipbuilding and marine structures in general, Electrical equipment for working in special conditions, Analytical chemistry, Electromagnetic compatibility (EMC), Kitchen equipment, Electronic components in general, Open systems interconnection (OSI), Protective equipment, Graphic technology, Air quality, Electrical engineering in general, Products of the textile industry, Aids for disabled or handicapped persons, Nuclear energy engineering, Safety of machinery, IT terminal and other peripheral equipment, Telecommunications in general, Radiocommunications.


US-CFR-file, What technologies were tested

  • CFR 40-60.5413-2013 Protection of Environment. Part60:Standards of performance for new stationary sources. Section60.5413:What are the performance testing procedures for control devices used to demonstrate compliance at my storage vessel or centrifugal compressor affected fa
  • CFR 40-63.144-2014 Protection of Environment. Part63:National emission standards for hazardous air pollutants for source categories. Section63.144:Process wastewater provisions—test methods and procedures for determining applicability and Group 1/Group 2 determinations (det

CZ-CSN, What technologies were tested

  • CSN 37 0660 Z1-1997
  • CSN 36 6150-1987 Telegraph apparatus wiih 5 element code. Basic parameters, lechnica! requirements and lesting methods
  • CSN 35 6534-1987 Electronic measuring instruments. Signal measuring generators with coaxial output. General technical requirements and testing methods
  • CSN 36 4862-1982 Linear diagnostic ultrasonio devices with echo pulses. Types. Technical requirements. Testing methods
  • CSN 28 0101-1997 Technical and safety tests of track vehicles operated on main lines and railway sidings

GOSTR, What technologies were tested

  • GOST R IEC 60605-6-2007 Reliability in techniques. Tests for the validity of the constant failure rate and failure intensity
  • GOST R 59247-2020 Non-destructive testing. Optical methods. Technical endoscopes with measurement function. General requirements
  • GOST R 8.958-2019 State system for ensuring the uniformity of measurements. Best available techniques. Automated measuring systems for control of harmful industrial emissions. Methods and means of tests
  • GOST 34479-2018 Machine tools. Test condition. Normtechical ensuring for perfectioning of diagnostic and repair-recover work methods of all availability tools

TR-TSE, What technologies were tested

  • TS 2630-1977 Statistical Interpretation Of Data - Technigues Of Estimation And Tests Relating To Means And Variance

SE-SIS, What technologies were tested

  • SIS SS 01 42 11-1979 Statistical interpretation of data — Techniques of estimation and tests relating to means and variances

European Telecommunications Standards Institute (ETSI), What technologies were tested

  • ETSI TS 103 238-2-2015 Integrated broadband cable telecommunication networks (CABLE); Testing; Conformance test specifications for NAT64 technology; Part 2: Test Suite Structure and Test Purposes (TSS&TP) (V1.1.1)
  • ETSI TS 103 241-2-2014 Integrated broadband cable telecommunication networks (CABLE); Testing; Conformance test specifications for DS-Lite technology; Part 2: Test Suite Structure and Test Purposes (TSS&TP) (V1.1.1)
  • ETSI TS 103 239-2-2014 Integrated broadband cable telecommunication networks (CABLE); Testing; Conformance test specifications for MAP-E technology; Part 2: Test Suite Structure and Test Purposes (TSS&TP) (V1.1.1)
  • ETSI TS 103 242-2-2014 Integrated broadband cable telecommunication networks (CABLE); Testing; Conformance test specifications for 464XLAT technology; Part 2:Test Suite Structure and Test Purposes (TSS&TP) (V1.1.1)
  • ETSI TS 103 243-2-2014 Integrated broadband cable telecommunication networks (CABLE); Testing; Conformance test specifications for 6rd technology; Part 2: Test Suite Structure and Test Purposes (TSS&TP) (V1.1.1)
  • ETSI TS 103 242-3-2014 Integrated broadband cable telecommunication networks (CABLE); Testing; Conformance test specifications for 464XLAT technology; Part 3: Abstract Test Suite (ATS) and Protocol Implementation eXtra Information for Testing (PIXIT) (V1.1.1; Includes Diskette)
  • ETSI TS 103 238-3-2015 Integrated broadband cable telecommunication networks (CABLE); Testing; Conformance test specifications for NAT64 technology; Part 3: Abstract Test Suite (ATS) and Protocol Implementation eXtra Information for Testing (PIXIT) (V1.1.1; Includes Diskette)
  • ETSI TS 103 242-1-2015 Integrated broadband cable telecommunication networks (CABLE); Testing; Conformance test specifications for 464XLAT technology; Part 1: Protocol Implementation Conformance Statement (PICS) proforma (V1.1.1)
  • ETSI TS 103 238-1-2015 Integrated broadband cable telecommunication networks (CABLE); Testing; Conformance test specifications for NAT64 technology; Part 1: Protocol Implementation Conformance Statement (PICS) proforma (V1.1.1)
  • ETSI TS 103 239-3-2014 Integrated broadband cable telecommunication networks (CABLE); Testing; Conformance test specifications for MAP-E technology; Part 3: Abstract Test Suite (ATS) and Protocol Implementation eXtra Information for Testing (PIXIT) (V1.1.1; Includes Diskette)
  • ETSI TS 103 241-3-2014 Integrated broadband cable telecommunication networks (CABLE); Testing; Conformance test specifications for DS-Lite technology; Part 3: Abstract Test Suite (ATS) and Protocol Implementation eXtra Information for Testing (PIXIT) (V1.1.1; Includes Diskette)
  • ETSI TS 103 243-3-2014 Integrated broadband cable telecommunication networks (CABLE); Testing; Conformance test specifications for 6rd technology; Part 3: Abstract Test Suite (ATS) and Protocol Implementation eXtra Information for Testing (PIXIT) (V1.1.1; Includes Diskette)
  • ETSI TS 103 239-1-2015 Integrated broadband cable telecommunication networks (CABLE); Testing; Conformance test specifications for MAP-E technology; Part 1: Protocol Implementation Conformance Statement (PICS) proforma (V1.1.1)
  • ETSI TS 103 241-1-2015 Integrated broadband cable telecommunication networks (CABLE); Testing; Conformance test specifications for DS-Lite technology; Part 1: Protocol Implementation Conformance Statement (PICS) proforma (V1.1.1)
  • ETSI TS 103 243-1-2015 Integrated broadband cable telecommunication networks (CABLE); Testing; Conformance test specifications for 6rd technology; Part 1: Protocol Implementation Conformance Statement (PICS) proforma (V1.1.1)
  • ETSI ETS 300 086 AMD 2-1997 Radio Equipment and Systems (RES); Land Mobil Group; Technical Characteristics and Test Conditions for Radio Equipment with an Internal RF Connector Intended Primarily for Analogue Speech
  • ETSI ETS 300 086-1991 Radio Equipment and Systems Land Mobile Service Technical Characteristics and Test Conditions for Radio Equipment with an Internal or External RF Connector Intended Primarily for Analogue Speech
  • ETSI ETS 300 086 PRA1-1996 Radio Equipment and Systems (RES); Land Mobile Group; Technical Characteristics and Test Conditions for Radio Equipment with an Internal or External RF Connector Intended Primarily for Analogue Speech
  • ETSI ETS 300 086 PRA2-1996 Radio Equipment and Systems (RES); Land Mobile Group; Technical Characteristics and Test Conditions for Radio Equipment with an Internal or External RF Connector Intended Primarily for Analogue Speech
  • ETSI PRETS 300 113-1995 Radio Equipment and Systems (RES); Land Mobile Service: Technical Characteristics and Test Conditions for Radio Equipment Intended for the Transmission of Data (and Speech) and Having and Antenna Connector

ETSI - European Telecommunications Standards Institute, What technologies were tested

  • TS 103 242-2-2014 Integrated broadband cable telecommunication networks (CABLE); Testing; Conformance test specifications for 464XLAT technology; Part 2:Test Suite Structure and Test Purposes (TSS&TP) (V1.1.1)
  • TS 103 239-2-2014 Integrated broadband cable telecommunication networks (CABLE); Testing; Conformance test specifications for MAP-E technology; Part 2: Test Suite Structure and Test Purposes (TSS&TP) (V1.1.1)
  • TS 103 243-2-2014 Integrated broadband cable telecommunication networks (CABLE); Testing; Conformance test specifications for 6rd technology; Part 2: Test Suite Structure and Test Purposes (TSS&TP) (V1.1.1)
  • TS 103 241-2-2014 Integrated broadband cable telecommunication networks (CABLE); Testing; Conformance test specifications for DS-Lite technology; Part 2: Test Suite Structure and Test Purposes (TSS&TP) (V1.1.1)
  • TS 103 238-2-2015 Integrated broadband cable telecommunication networks (CABLE); Testing; Conformance test specifications for NAT64 technology; Part 2: Test Suite Structure and Test Purposes (TSS&TP) (V1.1.1)
  • TS 103 242-3-2014 Integrated broadband cable telecommunication networks (CABLE); Testing; Conformance test specifications for 464XLAT technology; Part 3: Abstract Test Suite (ATS) and Protocol Implementation eXtra Information for Testing (PIXIT) (V1.1.1; Includes Diskette)
  • TS 103 238-3-2015 Integrated broadband cable telecommunication networks (CABLE); Testing; Conformance test specifications for NAT64 technology; Part 3: Abstract Test Suite (ATS) and Protocol Implementation eXtra Information for Testing (PIXIT) (V1.1.1; Includes Diskette)
  • TS 103 238-1-2015 Integrated broadband cable telecommunication networks (CABLE); Testing; Conformance test specifications for NAT64 technology; Part 1: Protocol Implementation Conformance Statement (PICS) proforma (V1.1.1)
  • TS 103 242-1-2015 Integrated broadband cable telecommunication networks (CABLE); Testing; Conformance test specifications for 464XLAT technology; Part 1: Protocol Implementation Conformance Statement (PICS) proforma (V1.1.1)
  • TS 103 243-3-2014 Integrated broadband cable telecommunication networks (CABLE); Testing; Conformance test specifications for 6rd technology; Part 3: Abstract Test Suite (ATS) and Protocol Implementation eXtra Information for Testing (PIXIT) (V1.1.1; Includes Diskette)
  • TS 103 241-3-2014 Integrated broadband cable telecommunication networks (CABLE); Testing; Conformance test specifications for DS-Lite technology; Part 3: Abstract Test Suite (ATS) and Protocol Implementation eXtra Information for Testing (PIXIT) (V1.1.1; Includes Diskette)
  • TS 103 239-3-2014 Integrated broadband cable telecommunication networks (CABLE); Testing; Conformance test specifications for MAP-E technology; Part 3: Abstract Test Suite (ATS) and Protocol Implementation eXtra Information for Testing (PIXIT) (V1.1.1; Includes Diskette)
  • TS 103 239-1-2015 Integrated broadband cable telecommunication networks (CABLE); Testing; Conformance test specifications for MAP-E technology; Part 1: Protocol Implementation Conformance Statement (PICS) proforma (V1.1.1)
  • TS 103 241-1-2015 Integrated broadband cable telecommunication networks (CABLE); Testing; Conformance test specifications for DS-Lite technology; Part 1: Protocol Implementation Conformance Statement (PICS) proforma (V1.1.1)
  • TS 103 243-1-2015 Integrated broadband cable telecommunication networks (CABLE); Testing; Conformance test specifications for 6rd technology; Part 1: Protocol Implementation Conformance Statement (PICS) proforma (V1.1.1)
  • ETS 300 086 AMD 2-1997 Radio Equipment and Systems (RES); Land Mobil Group; Technical Characteristics and Test Conditions for Radio Equipment with an Internal RF Connector Intended Primarily for Analogue Speech
  • ETS 300 086 PRA2-1996 Radio Equipment and Systems (RES); Land Mobile Group; Technical Characteristics and Test Conditions for Radio Equipment with an Internal or External RF Connector Intended Primarily for Analogue Speech
  • ETS 300 086 PRA1-1996 Radio Equipment and Systems (RES); Land Mobile Group; Technical Characteristics and Test Conditions for Radio Equipment with an Internal or External RF Connector Intended Primarily for Analogue Speech
  • ETS 300 086-1991 Radio Equipment and Systems Land Mobile Service Technical Characteristics and Test Conditions for Radio Equipment with an Internal or External RF Connector Intended Primarily for Analogue Speech

British Standards Institution (BSI), What technologies were tested

  • PD ISO/IEC TR 18047-7:2010 Information technology. Radio frequency identification device conformance test methods. Test methods for active air interface communications at 433 MHz
  • BS EN ISO/IEC 19896-2:2023 IT security techniques. Competence requirements for information security testers and evaluators - Knowledge, skills and effectiveness requirements for ISO/IEC 19790 testers
  • BS EN ISO 10360-7:2011 Geometrical product specifications (GPS). Acceptance and reverification tests for coordinate measuring machines (CMM). CMMs equipped with imaging probing systems
  • BS EN 50271:2010 Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen. Requirements and tests for apparatus using software and/or digital technologies
  • BS ISO 19921:2005 Ships and marine technology. Fire resistance of metallic pipe components with resilient and elastomeric seals. Test methods
  • BS EN ISO/IEC 19896-3:2023 IT security techniques. Competence requirements for information security testers and evaluators - Knowledge, skills and effectiveness requirements for ISO/IEC 15408 evaluators
  • BS EN 50271:2002 Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen - Requirements and tests for apparatus using software and/or digital technologies
  • BS EN 50271:2018 Tracked Changes. Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen. Requirements and tests for apparatus using software and/or digital technologies
  • BS ISO 10542-1:2012+A1:2021 Technical systems and aids for disabled or handicapped persons. Wheelchair tiedown and occupant-restraint systems - Requirements and test methods for all systems
  • BS ISO/IEC 15775:2022 Information technology. Office equipment. Method of specifying image reproduction of colour copying machines and multifunction devices with copying modes by printed test charts
  • 22/30414247 DC BS ISO/IEC 15775. Information technology. Office equipment. Method of specifying image reproduction of colour copying machines and multifunction devices with copying modes by printed test charts

Japanese Industrial Standards Committee (JISC), What technologies were tested

  • JIS Z 9041-2:1999 Statistical interpretation of data Part 2: Techniques of estimation and test relating to means and variances
  • JIS B 7440-7:2015 Geometrical product specifications (GPS) -- Acceptance and reverification tests for coordinate measuring machines (CMM) -- Part 7: CMMs equipped with imaging probing systems

BELST, What technologies were tested

  • STB 1662-2006 Distribution networks of cable TV systems. Basic parameters, technical requirements, measurement and test methods

RU-GOST R, What technologies were tested

  • GOST R 53391-2009 Electromagnetic compatibility of technical equipment. Construction machines with internal electrical power supply. Requirements and test methods
  • GOST R 51847-2009 Gas-fired instantaneous water heaters for the production of domestic hot water, fitted with atmospheric burners. General technical requirements and test methods
  • GOST R 51847-2001 Domestic gas running water heaters, types A and C. General specifications
  • GOST R ISO/IEC 10025-3-1994 Information technology. Telecommunications and information exchange between systems. Transport conformance testing for connection-mode transport protocol operating over connection-mode network service. Part 3. Transport test management protocol specificat
  • GOST R 12.4.188-2000 Occupational safety standards system. Filtering goggle against vaporous and gaseous toxic substances. Technical requirements and test methods
  • GOST R 12.4.220-2001 Occupational safety standards system. Respiratory protective devices. Self contained escape apparatus with chemical oxygen. General technical requirements. Test methods

Association Francaise de Normalisation, What technologies were tested

  • FD ISO/TR 13014:2012 Nanotechnologies - Directives relatives à la caractérisation physico-chimique des nano-objets manufacturés soumis aux essais toxicologiques
  • NF C23-571*NF EN 50271:2018 Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen - Requirements and tests for apparatus using software and/or digital technologies
  • NF C23-571:2010 Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen - Requirements and tests for apparatus using software and/or digital technologies.
  • NF EN 50271:2018 Appareils électriques de détection et de mesure des gaz combustibles, des gaz toxiques ou de l'oxygène - Exigences et essais pour les appareils utilisant un logiciel et/ou des technologies numériques
  • NF EN ISO/IEC 19896-3:2023 Techniques de sécurité IT - Exigences en matière de compétences des spécialistes en tests et évaluations de la sécurité de l'information - Partie 3 : exigences en matière de connaissances, compétences et efficacité des spécialistes en éva...
  • NF EN 61000-4-7/A1:2009 Compatibilité électromagnétique (CEM) - Partie 4-7 : techniques d'essai et de mesure - Guide général relatif aux mesures d'harmoniques et d'interharmoniques, ainsi qu'à l'appareillage de mesure, applicable aux réseaux d'alimentation et aux...
  • NF EN 61000-4-7:2003 Compatibilité électromagnétique (CEM) - Partie 4-7 : techniques d'essai et de mesure - Guide général relatif aux mesures d'harmoniques et d'interharmoniques, ainsi qu'à l'appareillage de mesure, applicable aux réseaux d'alimentation et aux...
  • NF ETS 300341:1999 Télécommunications - Équipements et systèmes radioélectriques (RES). Service mobile terrestre - Caractéristiques techniques et conditions d'essai pour les matériels radioélectriques à antenne incorporée, transmettant des signaux destinés à...

AENOR, What technologies were tested

  • UNE 16576:2002 Engineer's cold chisels, stonemason's chisels and alllied tools. Taper punches. Technical specifications and tests.
  • UNE-EN 50271:2011 Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen - Requirements and tests for apparatus using software and/or digital technologies
  • UNE 20672-7-4:1997 FIRE HAZARD TESTING. PART 7: GUIDANCE ON THE MINIMAZATION OF TOXIC HAZARDS DUE TO FIRES INVOLVING ELECTROTECHNICAL PRODUCTS. SECTION 4: UNUSUAL TOXIC EFFECTS IN FIRES.
  • UNE-ETS 300086/A2:1999 RADIO EQUIPMENT AND SYSTEMS (RES). LAND MOBILE GROUP. TECHNICAL CHARACTERISTICS AND TEST CONDITIONS FOR RADIO EQUIPMENT WITH AN INTERNAL OR EXTERNAL RF CONNECTOR INTENDED PRIMARILY FOR ANALOGUE SPEECH.
  • UNE-ETS 300086:1995 RADIO EQUIPMENT AND SYSTEMS. LAND MOBILE SERVICE. TECHNICAL CHARACTERISTICS AND TEST CONDITIONS FOR RADIO EQUIPMENT WITH AN INTERNAL OR EXTERNAL RF CONNECTOR INTENDED PRIMARILY FOR ANALOGUE SPEECH.
  • UNE-ETS 300113:1999 RADIO EQUIPMENT AND SYSTEMS (RES). LAND MOBILE SERVICE. TECHNICAL CHARACTERISTICS AND TEST CONDITIONS FOR RADIO EQUIPMENT INTENDED FOR THE TRANSMISSION OF DATA (AND SPEECH) AND HAVING AN ANTENNA CONNECTOR.

未注明发布机构, What technologies were tested

  • BS ISO/IEC 19896-2:2018 IT security techniques — Competence requirements for information security testers and evaluators Part 2 : Knowledge, skills and effectiveness requirements for ISO / IEC 19790 testers
  • ISO/IEC 19896-3:2018 IT security techniques — Competence requirements for information security testers and evaluators — Part 3: Knowledge, skills and effectiveness requirements for ISO/IEC 15408 evaluators
  • BS ISO/IEC 19896-3:2018 IT security techniques — Competence requirements for information security testers and evaluators Part 3 : Knowledge, skills and effectiveness requirements for ISO / IEC 15408 evaluators
  • ISO 8502-9:1998/Cor 1:1999 Preparation of steel substrates before application of paints and related products- Tests for the assessment of surface cleanliness - Part 9: Field method for the conductometric determination of water-soluble salts

ES-UNE, What technologies were tested

  • UNE-EN ISO/IEC 19896-2:2023 IT security techniques - Competence requirements for information security testers and evaluators - Part 2: Knowledge, skills and effectiveness requirements for ISO/IEC 19790 testers (ISO/IEC 19896-2:2018) (Endorsed by Asociación Española de Normaliza...
  • UNE-EN 50271:2019 Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen - Requirements and tests for apparatus using software and/or digital technologies
  • UNE-EN ISO/IEC 19896-3:2023 IT security techniques - Competence requirements for information security testers and evaluators - Part 3: Knowledge, skills and effectiveness requirements for ISO/IEC 15408 evaluators (ISO/IEC 19896-3:2018) (Endorsed by Asociación Española de Normal...

German Institute for Standardization, What technologies were tested

  • DIN EN ISO/IEC 19896-2:2022-10 IT security techniques - Competence requirements for information security testers and evaluators - Part 2: Knowledge, skills and effectiveness requirements for ISO/IEC 19790 testers (ISO/IEC 19896-2:2018); German and English version prEN ISO/IEC 19896-...
  • DIN EN ISO/IEC 19896-3:2022-10 IT security techniques - Competence requirements for information security testers and evaluators - Part 3: Knowledge, skills and effectiveness requirements for ISO/IEC 15408 evaluators (ISO/IEC 19896-3:2018); German and English version prEN ISO/IEC 198...
  • DIN EN 50271:2011 Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen - Requirements and tests for apparatus using software and/or digital technologies; German version EN 50271:2010
  • DIN EN 62321-7-1:2016 Determination of certain substances in electrotechnical products - Part 7-1: Determination of the presence of hexavalent chromium (Cr(VI)) in colorless and colored corrosion-protected coatings on metals by the colorimetric method (IEC 62321-7-1:2015); Ger
  • DIN EN 1093-3 Berichtigung 1:2009 Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 3: Test bench method for the measurement of the emission rate of a given pollutant; German version EN 1093-3:2006+A1:2008, Corrigendum to DIN EN 1093-3:2008-09
  • DIN 33872-6:2010 Information technology - Office machines - Method of specifying colour reproduction with YES/NO criteria - Part 6: Test charts for output properties - Testing of the equivalent spacing and of the regular chromatic spacing, only on CD-ROM

IX-ISO/IEC, What technologies were tested

  • ISO/IEC 11172-4:1995/Cor 1:2007 Corrigendum 1 - Information technology -- Coding of moving pictures and associated audio for digital storage media at up to about 1,5 Mbit/s -- Part 4: Compliance testing -

Danish Standards Foundation, What technologies were tested

  • DS/ISO/IEC TR 18047-7:2010 Information technology - Radio frequency identification device conformance test methods - Part 7: Test methods for active air interface communications at 433 MHz
  • DS/EN 50271:2010 Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen - Requirements and tests for apparatus using software and/or digital technologies
  • DS/ISO 19921:2006 Ships and marine technology - Fire resistance of metallic pipe components with resilient and elastomeric seals - Test methods
  • DS/ISO 10542-1:2013 Technical systems and aids for disabled or handicapped persons - Wheelchair tiedown and occupant-restraint systems - Part 1: Requirements and test methods for all systems
  • DS/ISO 10542-1/Cor 1:2013 Technical systems and aids for disabled or handicapped persons - Wheelchair tiedown and occupant-restraint systems - Part 1: Requirements and test methods for all systems
  • DS/I-ETS 300113/A1:1998 Radio Equipment and Systems (RES) - Land mobile service - Technical characteristics and test conditions for radio equipment intended for the transmission of data (and speech) and having an antenna connector
  • DS/ETS 300113:1998 Radio Equipment and Systems (RES) - Land mobile service - Technical characteristics and test conditions for radio equipment intended for the transmission of data (and speech) and having an antenna connector

International Organization for Standardization (ISO), What technologies were tested

  • ISO/IEC 19896-2:2018 IT security techniques — Competence requirements for information security testers and evaluators — Part 2: Knowledge, skills and effectiveness requirements for ISO/IEC 19790 testers
  • ISO/IEC 11172-4:1995 Information technology - Coding of moving pictures and associated audio for digital storage media at up to about 1,5 Mbit/s - Part 4: Compliance testing
  • ISO 16000-9:2006/cor 1:2007 Indoor air - Part 9: Determination of the emission of volatile organic compounds from building products and furnishing - Emission test chamber method; Technical Corrigendum 1

Lithuanian Standards Office , What technologies were tested

  • LST EN 50271-2010 Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen - Requirements and tests for apparatus using software and/or digital technologies
  • LST ETS 300 086-1997/A2-1997 Radio Equipment and Systems (RES). Land mobile group. Technical characteristics and test conditions for radio equipment with an internal or external RF connector intended primarily for analogue speech
  • LST ETS 300 086-1997/A1-1997 Radio Equipment and Systems (RES). Land mobile group. Technical characteristics and test conditions for radio equipment with an internal or external RF connector intended primarily for analogue speech
  • LST ETS 300 086-1997 Radio Equipment and Systems. Land mobile service. Technical characteristics and test conditions for radio equipment with an internal or external RF connector intended primarily for analogue speech
  • LST ETS 300 113+A1-2000 Radio Equipment and Systems (RES). Land mobile service. Technical characteristics and test conditions for radio equipment intended for the transmission of data (and speech) and having an antenna connector

European Committee for Electrotechnical Standardization(CENELEC), What technologies were tested

  • EN 50271:2010 Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen - Requirements and tests for apparatus using software and/or digital technologies
  • EN 50271:2018 Electrical apparatus for the detection and measurement of combustible gases@ toxic gases or oxygen - Requirements and tests for apparatus using software and/or digital technologies
  • DIN EN 62321-8:2017 Determination of certain substances in electrotechnical products - Part 8: Phthalates in polymers by gas chromatography-mass spectrometry (GC-MS), gas chromatography-mass spectrometry using a pyrolyzer/thermal desorption accessory (Py/TD-GC-MS) (IEC 62321
  • EN 61000-4-17:1999 Electromagnetic compatibility (EMC) - Part 4-17: Testing and measurement techniques - Ripple on d.c. input power port immunity test (Incorporates Amendment A2: 2009)

CENELEC - European Committee for Electrotechnical Standardization, What technologies were tested

  • EN 50271:2001 Electrical Apparatus for the Detection and Measurement of Combustible Gases@ Toxic Gases or Oxygen - Requirements and Tests for Apparatus Using Software and/or Digital Technologies

International Electrotechnical Commission (IEC), What technologies were tested

  • IEC 61000-4-36:2014 Electromagnetic compatibility (EMC) - Part 4-36: Testing and measurement techniques - IEMI immunity test methods for equipment and systems
  • IEC 62321-8:2017 Determination of certain substances in electrotechnical products - Part 8: Phthalates in polymers by gas chromatography-mass spectrometry (GC-MS), gas chromatography-mass spectrometry using a pyrolyzer/thermal desorption accessory (Py/TD-GC-MS)

American National Standards Institute (ANSI), What technologies were tested

  • ANSI/INCITS/ISO/IEC 23003-1/AMD 1:2009 Information technology - MPEG audio technologies - Part 1: MPEG Surround AMENDMENT 1: Conformance testing
  • ANSI/INCITS/ISO/IEC 11172-4:1995 Information technology - Coding of moving pictures and associated audio for digital storage media at up to about 1,5 Mbit/s - Part 4: Conformance testing
  • ANSI/ISO/IEC 11172-4:1995 Information technology - Coding of moving pictures and associated audio for digital storage media at up to about I,5 Mbit/s - Part 4: Compliance testing Adopted by INCITS

European Committee for Standardization (CEN), What technologies were tested

  • EN ISO/IEC 19896-2:2023 IT security techniques - Competence requirements for information security testers and evaluators - Part 2: Knowledge, skills and effectiveness requirements for ISO/IEC 19790 testers (ISO/IEC 19896-2:2018)
  • EN ISO/IEC 19896-3:2023 IT security techniques - Competence requirements for information security testers and evaluators - Part 3: Knowledge, skills and effectiveness requirements for ISO/IEC 15408 evaluators (ISO/IEC 19896-3:2018)

ITU-T - International Telecommunication Union/ITU Telcommunication Sector, What technologies were tested

  • ITU-T P.382-2016 Technical requirements and test methods for multi-microphone wired headset or headphone interfaces of digital wireless terminals (Study Group 12)

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, What technologies were tested

  • GB/T 17191.4-2000 Information technology-Coding of moving pictures and associated audio for digital storage media at up to about 1.5 Mbit/s Part 4:Compliance testing

NL-NEN, What technologies were tested

  • NVN-ENV 658-4-1992 Advanced technical ceramics. Mechanical properties of ceramic composites at room temperature. Part 4: Determination of shear strength by compression loading of notched specimens

American Society for Testing and Materials (ASTM), What technologies were tested

  • ASTM D7240-06 Standard Practice for Leak Location using Geomembranes with an Insulating Layer in Intimate Contact with a Conductive Layer via Electrical Capacitance Technique (Conductive Geomembrane Spark Test)
  • ASTM D7240-06(2011) Standard Practice for Leak Location using Geomembranes with an Insulating Layer in Intimate Contact with a Conductive Layer via Electrical Capacitance Technique (Conductive Geomembrane Spark Test)
  • ASTM D7240-18 Standard Practice for Electrical Leak Location Using Geomembranes with an Insulating Layer in Intimate Contact with a Conductive Layer via Electrical Capacitance Technique (Conductive-Backed Geomembra
  • ASTM C1854-17 Standard Test Method for Determination of Hydrogen (total from all sources) in Mixed Oxide ((U, Pu)O2) Sintered Pellets by the Inert Gas Fusion Technique Followed by Thermal Conductivity Me

Standard Association of Australia (SAA), What technologies were tested

KR-KS, What technologies were tested

  • KS P ISO 10542-1-2017 Technical systems and aids for disabled or handicapped persons — Wheelchair tiedown and occupant-restraint systems — Part 1: Requirements and test methods for all systems




Copyright ©2007-2023 ANTPEDIA, All Rights Reserved