ZH
RU
ES

Model Internal Validation and External Validation

Model Internal Validation and External Validation, Total:187 items.

In the international standard classification, Model Internal Validation and External Validation involves: Biology. Botany. Zoology, Ergonomics, Protection against fire, Wind turbine systems and other alternative sources of energy, Elements of buildings, Cereals, pulses and derived products, Linear and angular measurements, Quality, Energy and heat transfer engineering in general, Medical sciences and health care facilities in general, Vocabularies, Construction materials, Protective equipment, Equipment for the chemical industry, Metrology and measurement in general, Welding, brazing and soldering, Acoustics and acoustic measurements, Screw threads, Integrated Services Digital Network (ISDN), Microbiology, Solar energy engineering, Electrical equipment for working in special conditions, Protection of and in buildings, Industrial trucks, Electrical engineering in general, Aerospace electric equipment and systems, Accident and disaster control, Road engineering, Mechanical testing, Industrial automation systems, Sterilization and disinfection, Rubber and plastics products, Pipeline components and pipelines, Integrated circuits. Microelectronics, Installations in buildings, Applications of information technology, Seagoing vessels, Testing of metals.

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Model Internal Validation and External Validation

ASHRAE 4022-1997 Experimental Validation of a Numerical Model for an Internal Melt Ice-On-Coil Thermal Storage Tank
ASHRAE 3723-1993 Idealized Model of Reversed-Cycle Hot Gas Defrosting - Part 2: Experimental Analysis and Validation
ASHRAE OR-10-008-2010 Development and Validation of a Dynamic Air Handling Unit Model@ Part 2 (RP-1312)
ASHRAE 4408-2000 Modeling Frost Characteristics on Heat Exchanger Fins: Part II@ Model Validation and Limitations (RP-824)
ASHRAE CI-01-5-2-2001 Three-Dimensional Conjugate CFD Simulations of Internal Window Frame Cavities Validated Using IR Thermography
ASHRAE MN-00-6-2-2000 Modeling Frost Characteristics on Heat Exchanger Fins: Part 2@ Model Validation and Limitations (See Technical Paper 4408@ p.368)

GM North America, Model Internal Validation and External Validation

GM GM9123P-1999 Validation Tests for Interior Mounted Unexposed Modules

International Organization for Standardization (ISO), Model Internal Validation and External Validation

ISO/DTS 9491-1 Biotechnology — Predictive computational models in personalized medicine research — Part 1: Constructing, verifying and validating models
ISO/TS 9491-1:2023 Biotechnology — Predictive computational models in personalized medicine research — Part 1: Constructing, verifying and validating models
ISO 21474-2:2022 In vitro diagnostic medical devices — Multiplex molecular testing for nucleic acids — Part 2: Validation and verification
ISO/TR 13387-3:1999 Fire safety engineering - Part 3: Assessment and verification of mathematical fire models
ISO/TR 16730-3:2013 Fire safety engineering - Assessment, verification and validation of calculation methods - Part 3: Example of a CFD model
ISO/TR 16730-5:2013 Fire safety engineering.Assessment, verification and validation of calculation methods.Part 5: Example of an Egress model
ISO/TR 16730-4:2013 Fire safety engineering.Assessment, verification and validation of calculation methods.Part 4: Example of a structural model
ISO/CD 17738-4:2023 Thermal insulation products — Exterior insulation and finish systems (EIFS) — Part 4: Site Verification
ISO 16900-5:2016 Respiratory protective devices - Methods of test and test equipment - Part 5: Breathing machine, metabolic simulator, RPD headforms and torso, tools and verification tools
ISO/TS 27878:2023 Reproducibility of the level of detection (LOD) of binary methods in collaborative and in-house validation studies
ISO/TR 16730-2:2013 Fire safety engineering.Assessment, verification and validation of calculation methods.Part 2: Example of a fire zone model
ISO 21105-1:2019 Performance of buildings — Building enclosure thermal performance verification and commissioning — Part 1: General requirements
ISO/CD TS 3691-8:2023 Industrial trucks — Safety requirements and verification — Part 8: Regional requirements for countries outside the European Community
ISO/TS 3691-7:2011 Industrial trucks - Safety requirements and verification - Part 7: Regional requirements for countries within the European Community
ISO/TS 17450-1:2005/Cor 1:2007 Geometrical product specifications (GPS) - General concepts - Part 1: Model for geometrical specification and verification; Technical Corrigendum 1
ISO/TS 3691-8:2012 Industrial trucks - Safety requirements and verification - Part 8: Regional requirements for countries outside the European Community
ISO/TS 3691-8:2019 Industrial trucks — Safety requirements and verification — Part 8: Regional requirements for countries outside the European Community
ISO/TS 10303-1488:2018 Industrial automation systems and integration — Product data representation and exchange — Part 1488: Application module: Verification and validation
ISO 16900-5:2016/Amd 1:2018 Respiratory protective devices - Methods of test and test equipment - Part 5: Breathing machine, metabolic simulator, RPD headforms and torso, tools and verification tools - Amendment 1: RPD head forms front and side view
ISO/TS 10303-1039:2004 Industrial automation systems and integration - Product data representation and exchange - Part 1039: Application module: Geometric validation property representation
ISO 11607-2:2006/Amd 1:2014 Packaging for terminally sterilized medical devices — Part 2: Validation requirements for forming, sealing and assembly processes — Amendment 1
ISO 11607-2:2019/FDAmd 1 Packaging for terminally sterilized medical devices — Part 2: Validation requirements for forming, sealing and assembly processes — Amendment 1
ISO 11607-2:2019 Packaging for terminally sterilized medical devices — Part 2: Validation requirements for forming, sealing and assembly processes — Amendment 1
ISO 11336-3:2019 Large yachts — Strength, weathertightness and watertightness of glazed openings — Part 3: Quality assurance, installation and in-service inspection

Danish Standards Foundation, Model Internal Validation and External Validation

DS/EN ISO 15536-2:2007 Ergonomics - Computer manikins and body templates - Part 2: Verification of functions and validation of dimensions for computer manikin systems
DS/ISO/TR 16730-2:2013 Fire safety engineering - Assessment, verification and validation of calculation methods - Part 2: Example of a fire zone model
DS/ISO/TR 13387-3:2000 Fire safety engineering - Part 3: Assessment and verification of mathematical fire models
DS/EN ISO 17450-1:2012 Geometrical product specifications (GPS) - General concepts - Part 1: Model for geometrical specification and verification
DS/EN ISO 11546-2:2009 Acoustics - Determination of sound insulation performances of enclosures - Part 2: Measurements in situ (for acceptance and verification purposes)
DS/EN ISO 10360-4/Corr. 1:2007 Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 4: CMMs used in scanning measuring mode
DS/EN ISO 10360-4:2000 Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 4: CMMs used in scanning measuring mode
DS/EN ISO 11607-2:2006 Packaging for terminally sterilized medical devices - Part 2: Validation requirements for forming, sealing and assembly processes
DS/CEN/TR 16303-2:2013 Road restraint systems - Guidelines for computational mechanics of crash testing against vehicle restraint system - Part 2: Vehicle Modelling and Verification
DS/EN ISO 13791:2012 Thermal performance of buildings - Calculation of internal temperatures of a room in summer without mechanical cooling - General criteria and validation procedures
DS/EN ISO 148-3:2009 Metallic materials - Charpy pendulum impact test - Part 3: Preparation and characterization of Charpy V-notch test pieces for indirect verification of pendulum impact machines
DS/CEN/TR 16303-3:2013 Road restraint systems - Guidelines for computational mechanics of crash testing against vehicle restraint system - Part 3: Test Item Modelling and Verification

Professional Standard - Commodity Inspection, Model Internal Validation and External Validation

SN/T 2723.3-2010 Laboratory proficiency testing.Part 3: Format and content of proficiency testing report

Association Francaise de Normalisation, Model Internal Validation and External Validation

FD P92-540-3*FD ISO/TR 16730-3:2014 Fire safety engineering - Assesment, verification and validation of calculation methods - Part 3: example of a CFD model
FD P92-540-5*FD ISO/TR 16730-5:2014 Fire safety Engineering - Assessment, verification and validation of calculation methods - Part 5 : example of an Egress model
FD P95-540-4*FD ISO/TR 16730-4:2013 Fire safety engineering - Assesment, verification and validation of calculation methods - Part 4 : example of a structural model
FD P95-540-2*FD ISO/TR 16730-2:2013 Fire safety engineering - Assessment, verification and validation of calculation methods - Part 2 : example of a Fire zone model
NF C57-700-27-2*NF EN IEC 61400-27-2:2020 Wind energy generation systems - Part 27-2 : electrical simulation models - Model validation
NF EN IEC 61400-27-2:2020 Systèmes de génération d'énergie éolienne - Partie 27-2 : modèles de simulation électrique - Validation des modèles
NF EN ISO 15536-2:2007 Ergonomie - Mannequins informatisés et gabarits humains - Partie 2 : vérification des fonctions et validation des dimensions pour les systèmes de mannequins informatisés
NF ISO 21474-2:2022 Dispositifs médicaux de diagnostic in vitro - Tests moléculaires multiplex pour les acides nucléiques - Partie 2 : validation et vérification
NF EN ISO 17450-1:2012 Spécification géométrique des produits (GPS) - Concepts généraux - Partie 1 : modèle pour la spécification et la vérification géométriques
NF EN 319102-1:2022 Signatures électroniques et infrastructures (ESI) - Modes opératoires pour la création et la validation des signatures numériques AdES - Partie 1 : création et validation (V1.3.1)
NF EN ISO 16140-6:2019 Microbiologie de la chaîne alimentaire - Validation des méthodes - Partie 6 : protocole pour la validation de méthodes alternatives (commerciales) pour la confirmation microbiologique et le typage
FD ISO/TR 16730-3:2014 Ingénierie de la sécurité incendie - Évaluation, vérification et validation des méthodes de calcul - Partie 3 : exemple d''un modèle CFD
NF EN ISO 11546-2:2009 Acoustique - Détermination de l'isolement acoustique des encoffrements - Partie 2 : mesurages sur site (aux fins d'acceptation et de vérification)
FD ISO/TR 16730-2:2013 Ingénierie de la sécurité incendie - Évaluation, vérification et validation des méthodes de calcul - Partie 2 : exemple d'un modèle de zone
FD ISO/TR 16730-4:2013 Ingénierie de la sécurité incendie - Évaluation, vérification et validation des méthodes de calcul - Partie 4 : exemple d'un modèle strucutral
FD ISO/TR 16730-5:2014 Ingénierie de la sécurité incendie - Évaluation, vérification et validation des méthodes de calcul - Partie 5 : Exemple d''un modèle d''évacuation
XP ISO/TS 27878:2023 Reproductibilité du niveau de détection (LOD) des méthodes binaires pour des études de validation collaboratives et internes
NF X50-141-2:2006 Customer-supplier relations - Quality of demonstrations (tests, calculations, simulations, etc.) - Part 2 : guidelines for requesting and conducting tests
NF EN 934-6:2019 Adjuvants pour béton, mortier et coulis - Partie 6 : échantillonnage, évaluation et vérification de la constance des performances
NF E11-098-2:2019 Geometrical product specifications (GPS) - Dimensional measuring equipments - Part 2 : internal micrometer with tow spindles - Acceptance and reverification
NF E04-001-1*NF EN ISO 17450-1:2012 Geometrical product specifications (GPS) - General concepts - Part 1 : model for geometrical specification and verification
NF E11-095:2013 Geometrical product specification (GPS) - Dimensional measuring equipment - Reception and verification of micrometers for external measurements
NF S98-052-2*NF EN ISO 11607-2:2020 Packaging for terminally sterilized medical devices - Part 2 : validation requirements for forming, sealing and assembly processes
NF EN ISO 11607-2:2020 Emballages des dispositifs médicaux stérilisés au stade terminal - Partie 2 : exigences de validation pour les procédés de formage, scellage et assemblage
NF P38-301:2013 Light transmitting single skin profiled plastics sheets for internal and external roofs, walls and ceilings - Requirements and test methods
NF P38-301/IN1*NF EN 1013/IN1:2014 Light transmitting single skin profiled plastics sheets for internal and external roofs, walls and ceilings - Requirements and test methods
NF P38-301*NF EN 1013+A1:2014 Light transmitting single skin profiled plastics sheets for internal and external roofs, walls and ceilings - Requirements and test methods
NF S76-020-5*NF ISO 16900-5:2017 Respiratory protective devices - Methods of test and test equipment - Part 5 : breathing machine, metabolic simulator, RPD headforms and torso, tools and verification tools
NF ISO 16900-5:2017 Appareils de protection respiratoire - Méthodes d'essai et équipement d'essai - Partie 5 : machine respiratoire, simulateur métabolique, têtes factices et torses APR, outils et outils de vérification
NF A49-785-1*NF EN ISO 10893-1:2011 Non-destructive testing of steel tubes - Part 1 : automated electromagnetic testing of seamless and welded (except submerged arc-welded) steel tubes for the verification of hydraulic leaktightness
NF EN ISO 9241-220:2019 Ergonomie de l'intéraction homme-système - Partie 220 : processus de validation, d'éxécution et d'évaluation de la conception centrée sur l'opérateur humain au sein des organisations

Lithuanian Standards Office , Model Internal Validation and External Validation

LST EN ISO 15536-2:2007 Ergonomics - Computer manikins and body templates - Part 2: Verification of functions and validation of dimensions for computer manikin systems (ISO 15536-2:2007)
LST EN IEC 61400-27-2:2020 Wind energy generation systems - Part 27-2: Electrical simulation models - Model validation (IEC 61400-27-2:2020)
LST EN ISO 17450-1:2012 Geometrical product specifications (GPS) - General concepts - Part 1: Model for geometrical specification and verification (ISO 17450-1:2011)
LST EN ISO 11546-2:2010 Acoustics - Determination of sound insulation performances of enclosures - Part 2: Measurements in situ (for acceptance and verification purposes) (ISO 11546-2:1995)
LST EN ISO 10360-4:2001 Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 4: CMMs used in scanning measuring mode (ISO 10360-4:2000)

AENOR, Model Internal Validation and External Validation

UNE-EN ISO 15536-2:2007 Ergonomics - Computer manikins and body templates - Part 2: Verification of functions and validation of dimensions for computer manikin systems (ISO 15536-2:2007)
UNE-EN ISO 11546-2:2010 Acoustics - Determination of sound insulation performances of enclosures - Part 2: Measurements in situ (for acceptance and verification purposes) (ISO 11546-2:1995)
UNE-EN ISO 10360-4:2001 Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 4: CMMs used in scanning measuring mode. (ISO 10360-4:2000)

German Institute for Standardization, Model Internal Validation and External Validation

DIN EN ISO 15536-2:2007-06 Ergonomics - Computer manikins and body templates - Part 2: Verification of functions and validation of dimensions for computer manikin systems (ISO 15536-2:2007); German version EN ISO 15536-2:2007
DIN 4103-1:2015 Internal non-loadbearing partitions - Part 1: Requirements and verification
DIN 4103-1:2015-06 Internal non-loadbearing partitions - Part 1: Requirements and verification
DIN EN ISO 17450-1:2012-04 Geometrical product specifications (GPS) - General concepts - Part 1: Model for geometrical specification and verification (ISO 17450-1:2011); German version EN ISO 17450-1:2011
DIN 863-4:1999 Verification of geometrical parameters - Micrometers - Part 4: Internal micrometers; concepts, requirements, testing
DIN EN ISO 16140-6:2020-04 Microbiology of the food chain - Method validation - Part 6: Protocol for the validation of alternative (proprietary) methods for microbiological confirmation and typing procedures (ISO 16140-6:2019); German version EN ISO 16140-6:2019
DIN 158-1:1997-06 Metric external taper screw threads and mating internal parallel screw threads - Part 1: Nominal sizes, limit deviations, limits of size and verification
DIN 863-3:1999 Verification of geometrical parameters - Micrometers - Part 3: Special design micrometer callipers for external measurement; characteristics, requirements, testing
DIN 28055-2:2002 Chemical apparatus - Surface protection with organic linings for application to metallic components - Part 2: Proof of suitability and testing
DIN EN ISO 11546-2:2010-01 Acoustics - Determination of sound insulation performances of enclosures - Part 2: Measurements in situ (for acceptance and verification purposes) (ISO 11546-2:1995); German version EN ISO 11546-2:2009
DIN 158-1:1997 Metric external taper screw threads and mating internal parallel screw threads - Part 1: Nominal sizes, limit deviations, limits of size and verification
DIN 863-1:2017-02 Verification of geometrical parameters - Micrometers - Part 1: Standard design micrometer callipers for external measurement; concepts, requirements, testing
DIN 863-1:1999 Verification of geometrical parameters - Micrometers - Part 1: Standard design micrometer callipers for external measurement; concepts, requirements, testing
DIN EN ISO 16140-6:2020 Microbiology of the food chain - Method validation - Part 6: Protocol for the validation of alternative (proprietary) methods for microbiological confirmation and typing procedures (ISO 16140-6:2019)
DIN 863-2:1999 Verification of geometrical parameters - Micrometers - Part 2: Micrometer callipers heads, Depth micrometer; concepts, requirements, testing
DIN EN 934-6:2019-05 Admixtures for concrete, mortar and grout - Part 6: Sampling, assessment and verification of the constancy of performance; German version EN 934-6:2019
DIN ISO 14:1986-12 Straigth-sided splines for cylindrical shafts with internal centering; dimensions, tolerances and verification; identical with ISO 14, edition 1982
DIN EN 934-6:2019 Admixtures for concrete, mortar and grout - Part 6: Sampling, assessment and verification of the constancy of performance
DIN EN 934-6:2017 Admixtures for concrete, mortar and grout - Part 6: Sampling, assessment and verification of the constancy of performance; German and English version prEN 934-6:2017
DIN EN ISO 11607-2:2020-05 Packaging for terminally sterilized medical devices - Part 2: Validation requirements for forming, sealing and assembly processes (ISO 11607-2:2019); German version EN ISO 11607-2:2020 / Note: To be amended by DIN EN ISO 11607-2/A1 (2022-08).
DIN EN ISO 11607-2/A11:2022-08 Packaging for terminally sterilized medical devices - Part 2: Validation requirements for forming, sealing and assembly processes (ISO 11607-2:2019); German version EN ISO 11607-2:2020/A11:2022
DIN 18168-2:2008 Ceiling linings and suspended ceilings with gypsum plasterboards - Part 2: Verification of the load-carrying capacity of metal sub-constructions and metal suspending rods
DIN 4109-33:2016 Sound insulation in buildings - Part 33: Data for verification of sound insulation (component catalogue) - Timber construction, lightweight construction and dry walling
DIN 4102-20:2017-10 Fire behaviour of building materials and building components - Part 20: Complementary verification for the assessment of the fire behaviour of external wall claddings
DIN CEN/TR 16303-3:2012 Road restraint systems - Guidelines for computational mechanics of crash testing against vehicle restraint system - Part 3: Test Item Modelling and Verification; German version CEN/TR 16303-3:2012
DIN 32876-1:1999 Verification of geometrical parameters - Electrical linear measurement - Part 1: Analogue reception of the measured quantity; concepts, requirements, testing

International Electrotechnical Commission (IEC), Model Internal Validation and External Validation

IEC 61400-27-2:2020 Wind energy generation systems - Part 27-2: Electrical simulation models - Model validation
IEC 61215-2:2021 RLV Terrestrial photovoltaic (PV) modules - Design qualification and type approval - Part 2: Test procedures
IEC 61215-1:2021 RLV Terrestrial photovoltaic (PV) modules - Design qualification and type approval - Part 1: Test requirements
IEC 60695-11-2:2003 Fire hazard testing - Part 11-2: Test flames; 1 kW nominal pre-mixed flame; Apparatus, confirmatory test arrangement and guidance
IEC 60695-11-2/COR1:2006 Fire hazard testing - Part 11-2: Test flames - 1 kW nominal pre-mixed flame - Apparatus, confirmatory test arrangement and guidance; Corrigendum 1
IEC 60748-23-2:2002 Semiconductor devices - Integrated circuits - Part 23-2: Hybrid integrated circuits and film structures; Manufacturing line certification; Internal visual inspection and special tests

European Committee for Electrotechnical Standardization（CENELEC）, Model Internal Validation and External Validation

EN IEC 61400-27-2:2020 Wind energy generation systems - Part 27-2: Electrical simulation models - Model validation

American National Standards Institute （ANSI), Model Internal Validation and External Validation

ANSI/ARESCA 61400-27-2:2022 Wind energy generation systems - Part 27-2: Electrical simulation models - Model validation

ES-UNE, Model Internal Validation and External Validation

UNE-EN IEC 61400-27-2:2020 Wind energy generation systems - Part 27-2: Electrical simulation models - Model validation (Endorsed by Asociación Española de Normalización in November of 2020.)
UNE-EN ISO 17450-1:2015 Geometrical product specifications (GPS) - General concepts - Part 1: Model for geometrical specification and verification (ISO 17450-1:2011)
UNE-EN ISO 16140-6:2020 Microbiology of the food chain - Method validation - Part 6: Protocol for the validation of alternative (proprietary) methods for microbiological confirmation and typing procedures (ISO 16140-6:2019)
UNE-EN 934-6:2019 Admixtures for concrete, mortar and grout - Part 6: Sampling, assessment and verification of the constancy of performance
UNE-EN ISO 11607-2:2020 Packaging for terminally sterilized medical devices - Part 2: Validation requirements for forming, sealing and assembly processes (ISO 11607-2:2019)
UNE-EN ISO 11607-2:2020/A11:2022 Packaging for terminally sterilized medical devices - Part 2: Validation requirements for forming, sealing and assembly processes (ISO 11607-2:2019)
UNE-EN 61300-2-50:2012/AC:2015 V2 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-50: Tests - Fibre optic connector proof test with static load - Singlemode and multimode

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Model Internal Validation and External Validation

GB/T 24895-2010 Inspection of grain and oils-General regulations for model authentication of near-infrared analysis and administration and maintenance of network
GB/T 32465-2015 Requirements for verification & validation of detection methods and internal quality control on chemical analysis
GB/T 32467-2015 Verification and validation of methods and internal quality contorl on chemical analysis.Terms and definitions
GB/Z 24637.1-2009 Geometrical Product Specifications(GPS).General concepts.Part 1:Model for geometrical specification and verification

British Standards Institution (BSI), Model Internal Validation and External Validation

21/30415510 DC BS ISO 21474-2. In vitro diagnostic medical devices. Multiplex molecular testing for nucleic acids. Part 2. Validation and verification
18/30350299 DC BS EN 61400-27-2. Wind energy generation systems. Part 27-2. Electrical simulation models. Model validation
PD ISO/TS 27878:2023 Reproducibility of the level of detection (LOD) of binary methods in collaborative and in-house validation studies
BS ISO 16900-5:2016+A1:2018 Respiratory protective devices — Methods of test and test equipment Part 5 : Breathing machine, metabolic simulator, RPD headforms and torso, tools and verification tools
BS EN 1264-2:2008 Water based surface embedded heating and cooling systems - Part 2: Floor heating: Prove methods for the determination of the thermal output using calculation and test methods
BS IEC 60748-23-2:2002 Semiconductor devices - Integrated circuits - Hybrid integrated circuits and film structures - Manufacturing line certification - Internal visual inspection and special tests

PL-PKN, Model Internal Validation and External Validation

PN-EN IEC 61400-27-2-2021-04 E Wind energy generation systems -- Part 27-2: Electrical simulation models -- Model validation (IEC 61400-27-2:2020)

IN-BIS, Model Internal Validation and External Validation

IS 10201 Pt.6-1988

Korean Agency for Technology and Standards (KATS), Model Internal Validation and External Validation

KS B ISO 17450-1:2020 Geometrical product specifications(GPS) — General concepts —Part 1: Model for geometrical specification and verification
KS B ISO 17450-1:2014 Geometrical Product Specifications(GPS)-General concepts-Part 1:Model for geometrical specification and verification
KS B ISO 17450-1:2011 Geometrical Product Specifications(GPS)-General concepts-Part 1:Model for geometrical specification and verification
KS B ISO 17450-1:2015 Geometrical Product Specifications(GPS) — General concepts — Part 1: Model for geometrical specification and verification
KS W ISO 5066-2-2003(2008) Aircraft－Hermetically sealed monostable electrical relays, 2A and 3A－Part 2：Type approval tests
KS P ISO 11607-2:2021 Packaging for terminally sterilized medical devices —Part 2: Validation requirements for forming, sealing and assembly processes
KS P ISO 11607-2:2018 Packaging for terminally sterilized medical devices — Part 2: Validation requirements for forming, sealing and assembly processes
KS C IEC 61360-3-2003(2008) Standard data element types with associated classification scheme for electric components－Part 3：Maintenance and validation procedures
KS B ISO 10893-1:2018 Non-destructive testing of steel tubes — Part 1: Automated electromagnetic testing of seamless and welded (except submerged arc-welded) steel tubes for the verification of hydraulic leaktightness

KR-KS, Model Internal Validation and External Validation

KS B ISO 17450-1-2020 Geometrical product specifications(GPS) — General concepts —Part 1: Model for geometrical specification and verification
KS B 5544-2003(2023)
KS P ISO 11607-2-2021 Packaging for terminally sterilized medical devices —Part 2: Validation requirements for forming, sealing and assembly processes
KS P ISO 11607-2-2018 Packaging for terminally sterilized medical devices — Part 2: Validation requirements for forming, sealing and assembly processes
KS B ISO 10893-1-2018 Non-destructive testing of steel tubes — Part 1: Automated electromagnetic testing of seamless and welded (except submerged arc-welded) steel tubes for the verification of hydraulic leaktightness

SE-SIS, Model Internal Validation and External Validation

SIS SS-ISO 14:1987 Straight-sided splines for cylindrical shafts with internal centering - Dimen- sons, tolerances and verification

US-CFR-file, Model Internal Validation and External Validation

CFR 15-748.13-2013 Commerce and foreign trade. Part748:Applications (classification, advisory, and license) and documentation. Section748.13:Delivery Verification (DV).
CFR 6-37.27-2014 Domestic security. Part37:REAL ID driver’s licenses and identification cards. Subpart B:Minimum documentation, verification, and card issuance requirements. Section37.27:Driver’s licenses and identification cards issued during the age-based enrollment Per
CFR 9-590.915-2014 Animals and animal products. Part590:Inspection of eggs and egg products (egg products inspection act). Section590.915:Foreign inspection certificate requirements.
CFR 46-115.114-2014 Shipping. Part115:Inspection and certification. Section115.114:Alternative requirements for a vessel operating as other than a small passenger vessel.

American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE), Model Internal Validation and External Validation

ASHRAE OR-05-5-2-2005 External Coupling between CFD and Energy Simulation: Implementation and Validation

ETSI - European Telecommunications Standards Institute, Model Internal Validation and External Validation

ETR 293-2-1998 Terrestrial Trunked Radio (TETRA); Air Interface (AI) Layer 2 and 3 Protocol Validation; Part 2: Validation of SDL Models for Packet Data Optimized (PDO)
ETR 293-1-1997 Radio Equipment and Systems (RES); Trans-European Trunked Radio (TETRA); Air Interface (AI) Layer 2 and 3 Protocol Validation; Part 1: Validation of SDL Models for Voice Plus Data (V+D)

RU-GOST R, Model Internal Validation and External Validation

GOST R ISO 15536-2-2010 Ergonomics. Computer manikins and body templates. Part 2. Verification of functions and Validation of dimensions for Computer manikin systems
GOST R 53079.2-2008 Medical laboratory technologies. Quality assurance of clinical laboratory tests. Part 2. Guidelines for improvements of quality in clinical-diagnostic laboratory. Typical model
GOST 30852.1-2002 Explosionproof electrical equipment. Part 1. Flameproof enclusure type explosion protection
GOST R 55070-2012 Fiberglass reinforced thermosetting plastic pipes and parts of pipelines. Methods to prove the leak tightness under short-term internal pressure
GOST R ISO/TS 10303-1039-2011 Industrial automation systems and integration. Product data representation and exchange. Part 1039. Application module. Geometric validation property representation

ZA-SANS, Model Internal Validation and External Validation

SANS 9455-6:1995 Soft soldering fluxes - Test methods Part 6: Determination and detection of halide (excluding fluoride) content

VN-TCVN, Model Internal Validation and External Validation

TCVN 7361-2003 Road vehicles.Rear marking plates for heavy and long vehicles.Requirements and test methods in type approval
TCVN 6999-2002 Road vehicles.External projections from two or three-wheel motorcycles and mopeds.Requirements and test methods in type approval

GB-REG, Model Internal Validation and External Validation

REG NASA-LLIS-1010-1997 Lessons Learned ?Space Shuttle Program/Super Light Weight External Tank/Materials& Test and Verification Changes

未注明发布机构, Model Internal Validation and External Validation

DIN EN ISO 9455-6 Berichtigung:2023 Fluxes for soft soldering – Test methods – Part 6: Determination and verification of the halide content (except fluoride)
BS 1610-1:1992(1999) Materials testing machines and force verification equipment — Part 1 : Specification for the grading of the forces applied by materials testing machines whenused inthe compression mode
BS EN 61300-2-50:2007(2015) Fibre optic interconnecting devices and passive components — Basic test and measurement procedures — Part 2 - 50 : Tests — Fibre optic connector proof test with static load — Singlemode and multimode

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Model Internal Validation and External Validation

GB/T 35655-2017 Guideline for verification and validation of chemical analysis method and internal quality control—Chromatography
GB/T 35656-2017 Guideline for verification and validation of chemical analysis method and internal quality control—Method on reporting qualitative test reports
GB/T 35657-2017 Guideline for verification and validation of chemical analysis method and internal quality control－Metal component analysis based on sample digestion

Professional Standard - Post and Telecommunication, Model Internal Validation and External Validation

YDN 114-1999 Verification and protocol stack test of synchronous digital hierarchy (SDH) network element management functions (internal standard)

CH-SNV, Model Internal Validation and External Validation

SN EN ISO 16140-6:2021 Microbiology of the food chain - Method validation - Part 6: Protocol for the validation of alternative (proprietary) methods for microbiological confirmation and typing procedures (ISO 16140-6:2019)

BG-BDS, Model Internal Validation and External Validation

BGC IEC 60079-1:2000 Electrical apparatus for explosive gas atmospheres-Part 1:Construction and verification test of flameproof enclosures of electrical apparatus

CEN - European Committee for Standardization, Model Internal Validation and External Validation

PREN 934-6-2017 Admixtures for concrete@ mortar and grout - Part 6: Sampling@ assessment and verification of the constancy of performance

European Committee for Standardization (CEN), Model Internal Validation and External Validation

PD CEN/TR 16303-3:2012 Road restraint systems - Guidelines for computational mechanics of crash testing against vehicle restraint system - Part 3: Test Item Modelling and Verification
PD CEN/TR 16303-2:2012 Road restraint systems - Guidelines for computational mechanics of crash testing against vehicle restraint system - Part 2: Vehicle Modelling and Verification
EN 10246-2:2000 Non-Destructive Testing of Steel Tubes - Part 2: Automatic Eddy Current Testing of Seamless and Welded (Except Submerged Arc-Welded) Austenitic and Austenitic-Ferritic Steel Tubes for Verififcation of Hydraulic Leak-Tightness

Japanese Industrial Standards Committee (JISC), Model Internal Validation and External Validation

JIS C 60695-11-2:2007 Fire hazard testing -- Part 11-2: Test flames -- 1 kW nominal pre-mixed flame -- Apparatus, confirmatory test arrangement and guidance
JIS C 60695-11-2:2016 Fire hazard testing -- Part 11-2: Test flames -- 1 kW nominal pre-mixed flame -- Apparatus, confirmatory test arrangement and guidance
JIS B 7440-4:2003 Geometrical Product Specifications (GPS) -- Acceptance and reverification tests for coordinate measuring machines (CMM) -- Part 4: CMMs used in scanning measuring mode

ANSI - American National Standards Institute, Model Internal Validation and External Validation

X9/TG-19-1-1999 TG-19@ Part 1: Modes of Operation Validation System for the Triple Data Encryption Algorithm (TMOVS): Requirements and Procedures

GOSTR, Model Internal Validation and External Validation

GOST ISO 11607-2-2018 Packaging for terminally sterilized medical devices. Part 2. Validation requirements for forming, sealing and assembly processes

AT-ON, Model Internal Validation and External Validation

ONORM EN 20140-2-1993 Acoustics - Measurement of sound insulation in buildings and of building elements - Part 2: Determination, verification and application of precision data (ISO 140-2:1991)

IX-ECMA, Model Internal Validation and External Validation

ECMA 219-1996 Authentication and Privilege Attribute Security Application with related key distribution functions - Part 1: Overview and Functional Model - Part 2: Security Information Objects - Part 3: Service Definitions (2nd Edition)