ZH
RU
ES

Internal and external validation of the model

Internal and external validation of the model, Total:151 items.

In the international standard classification, Internal and external validation of the model involves: Biology. Botany. Zoology, Ergonomics, Protection against fire, Energy and heat transfer engineering in general, Linear and angular measurements, Vocabularies, Acoustics and acoustic measurements, Metrology and measurement in general, Protective equipment, Microbiology, Industrial trucks, Screw threads, Electrical equipment for working in special conditions, Accident and disaster control, Road engineering, Mechanical testing, Quality, Sterilization and disinfection, Elements of buildings, Rubber and plastics products, Protection of and in buildings, Pipeline components and pipelines, Seagoing vessels, Installations in buildings, Packaging materials and accessories, Testing of metals.

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Internal and external validation of the model

ASHRAE 4022-1997 Experimental Validation of a Numerical Model for an Internal Melt Ice-On-Coil Thermal Storage Tank
ASHRAE 3723-1993 Idealized Model of Reversed-Cycle Hot Gas Defrosting - Part 2: Experimental Analysis and Validation
ASHRAE OR-10-008-2010 Development and Validation of a Dynamic Air Handling Unit Model@ Part 2 (RP-1312)
ASHRAE 4408-2000 Modeling Frost Characteristics on Heat Exchanger Fins: Part II@ Model Validation and Limitations (RP-824)
ASHRAE CI-01-5-2-2001 Three-Dimensional Conjugate CFD Simulations of Internal Window Frame Cavities Validated Using IR Thermography
ASHRAE MN-00-6-2-2000 Modeling Frost Characteristics on Heat Exchanger Fins: Part 2@ Model Validation and Limitations (See Technical Paper 4408@ p.368)

GM North America, Internal and external validation of the model

GM GM9123P-1999 Validation Tests for Interior Mounted Unexposed Modules

International Organization for Standardization (ISO), Internal and external validation of the model

ISO/DTS 9491-1 Biotechnology — Predictive computational models in personalized medicine research — Part 1: Constructing, verifying and validating models
ISO/TS 9491-1:2023 Biotechnology — Predictive computational models in personalized medicine research — Part 1: Constructing, verifying and validating models
ISO 21474-2:2022 In vitro diagnostic medical devices — Multiplex molecular testing for nucleic acids — Part 2: Validation and verification
ISO/TR 13387-3:1999 Fire safety engineering - Part 3: Assessment and verification of mathematical fire models
ISO/TR 16730-3:2013 Fire safety engineering - Assessment, verification and validation of calculation methods - Part 3: Example of a CFD model
ISO/TR 16730-5:2013 Fire safety engineering.Assessment, verification and validation of calculation methods.Part 5: Example of an Egress model
ISO/TR 16730-4:2013 Fire safety engineering.Assessment, verification and validation of calculation methods.Part 4: Example of a structural model
ISO/TS 27878:2023 Reproducibility of the level of detection (LOD) of binary methods in collaborative and in-house validation studies
ISO/TR 16730-2:2013 Fire safety engineering.Assessment, verification and validation of calculation methods.Part 2: Example of a fire zone model
ISO 16900-5:2016 Respiratory protective devices - Methods of test and test equipment - Part 5: Breathing machine, metabolic simulator, RPD headforms and torso, tools and verification tools
ISO/CD TS 3691-8:2023 Industrial trucks — Safety requirements and verification — Part 8: Regional requirements for countries outside the European Community
ISO/TS 3691-7:2011 Industrial trucks - Safety requirements and verification - Part 7: Regional requirements for countries within the European Community
ISO/TS 3691-8:2012 Industrial trucks - Safety requirements and verification - Part 8: Regional requirements for countries outside the European Community
ISO/TS 3691-8:2019 Industrial trucks — Safety requirements and verification — Part 8: Regional requirements for countries outside the European Community
ISO/TS 17450-1:2005/Cor 1:2007 Geometrical product specifications (GPS) - General concepts - Part 1: Model for geometrical specification and verification; Technical Corrigendum 1
ISO 11607-2:2006/Amd 1:2014 Packaging for terminally sterilized medical devices — Part 2: Validation requirements for forming, sealing and assembly processes — Amendment 1
ISO 11607-2:2019 Packaging for terminally sterilized medical devices — Part 2: Validation requirements for forming, sealing and assembly processes — Amendment 1
ISO 11336-3:2019 Large yachts — Strength, weathertightness and watertightness of glazed openings — Part 3: Quality assurance, installation and in-service inspection
ISO 16900-5:2016/Amd 1:2018 Respiratory protective devices - Methods of test and test equipment - Part 5: Breathing machine, metabolic simulator, RPD headforms and torso, tools and verification tools - Amendment 1: RPD head forms front and side view
ISO 11607-2:2019/FDAmd 1 Packaging for terminally sterilized medical devices — Part 2: Validation requirements for forming, sealing and assembly processes — Amendment 1

Danish Standards Foundation, Internal and external validation of the model

DS/EN ISO 15536-2:2007 Ergonomics - Computer manikins and body templates - Part 2: Verification of functions and validation of dimensions for computer manikin systems
DS/ISO/TR 16730-2:2013 Fire safety engineering - Assessment, verification and validation of calculation methods - Part 2: Example of a fire zone model
DS/ISO/TR 13387-3:2000 Fire safety engineering - Part 3: Assessment and verification of mathematical fire models
DS/EN ISO 17450-1:2012 Geometrical product specifications (GPS) - General concepts - Part 1: Model for geometrical specification and verification
DS/EN ISO 11546-2:2009 Acoustics - Determination of sound insulation performances of enclosures - Part 2: Measurements in situ (for acceptance and verification purposes)
DS/EN ISO 11607-2:2006 Packaging for terminally sterilized medical devices - Part 2: Validation requirements for forming, sealing and assembly processes
DS/EN ISO 10360-4/Corr. 1:2007 Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 4: CMMs used in scanning measuring mode
DS/EN ISO 10360-4:2000 Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 4: CMMs used in scanning measuring mode
DS/EN ISO 13791:2012 Thermal performance of buildings - Calculation of internal temperatures of a room in summer without mechanical cooling - General criteria and validation procedures
DS/EN ISO 148-3:2009 Metallic materials - Charpy pendulum impact test - Part 3: Preparation and characterization of Charpy V-notch test pieces for indirect verification of pendulum impact machines

Professional Standard - Commodity Inspection, Internal and external validation of the model

SN/T 2723.3-2010 Laboratory proficiency testing.Part 3: Format and content of proficiency testing report

Association Francaise de Normalisation, Internal and external validation of the model

FD P92-540-3*FD ISO/TR 16730-3:2014 Fire safety engineering - Assesment, verification and validation of calculation methods - Part 3: example of a CFD model
FD P92-540-5*FD ISO/TR 16730-5:2014 Fire safety Engineering - Assessment, verification and validation of calculation methods - Part 5 : example of an Egress model
FD P95-540-4*FD ISO/TR 16730-4:2013 Fire safety engineering - Assesment, verification and validation of calculation methods - Part 4 : example of a structural model
FD P95-540-2*FD ISO/TR 16730-2:2013 Fire safety engineering - Assessment, verification and validation of calculation methods - Part 2 : example of a Fire zone model
NF EN ISO 15536-2:2007 Ergonomie - Mannequins informatisés et gabarits humains - Partie 2 : vérification des fonctions et validation des dimensions pour les systèmes de mannequins informatisés
NF EN 319102-1:2022 Signatures électroniques et infrastructures (ESI) - Modes opératoires pour la création et la validation des signatures numériques AdES - Partie 1 : création et validation (V1.3.1)
NF EN ISO 17450-1:2012 Spécification géométrique des produits (GPS) - Concepts généraux - Partie 1 : modèle pour la spécification et la vérification géométriques
NF EN ISO 11546-2:2009 Acoustique - Détermination de l'isolement acoustique des encoffrements - Partie 2 : mesurages sur site (aux fins d'acceptation et de vérification)
XP ISO/TS 27878:2023 Reproductibilité du niveau de détection (LOD) des méthodes binaires pour des études de validation collaboratives et internes
FD ISO/TR 16730-3:2014 Ingénierie de la sécurité incendie - Évaluation, vérification et validation des méthodes de calcul - Partie 3 : exemple d''un modèle CFD
FD ISO/TR 16730-2:2013 Ingénierie de la sécurité incendie - Évaluation, vérification et validation des méthodes de calcul - Partie 2 : exemple d'un modèle de zone
FD ISO/TR 16730-4:2013 Ingénierie de la sécurité incendie - Évaluation, vérification et validation des méthodes de calcul - Partie 4 : exemple d'un modèle strucutral
FD ISO/TR 16730-5:2014 Ingénierie de la sécurité incendie - Évaluation, vérification et validation des méthodes de calcul - Partie 5 : Exemple d''un modèle d''évacuation
NF X50-141-2:2006 Customer-supplier relations - Quality of demonstrations (tests, calculations, simulations, etc.) - Part 2 : guidelines for requesting and conducting tests
NF EN 934-6:2019 Adjuvants pour béton, mortier et coulis - Partie 6 : échantillonnage, évaluation et vérification de la constance des performances
NF E04-001-1*NF EN ISO 17450-1:2012 Geometrical product specifications (GPS) - General concepts - Part 1 : model for geometrical specification and verification
NF E11-098-2:2019 Geometrical product specifications (GPS) - Dimensional measuring equipments - Part 2 : internal micrometer with tow spindles - Acceptance and reverification
NF E11-095:2013 Geometrical product specification (GPS) - Dimensional measuring equipment - Reception and verification of micrometers for external measurements
NF S98-052-2*NF EN ISO 11607-2:2020 Packaging for terminally sterilized medical devices - Part 2 : validation requirements for forming, sealing and assembly processes
NF EN ISO 11607-2:2020 Emballages des dispositifs médicaux stérilisés au stade terminal - Partie 2 : exigences de validation pour les procédés de formage, scellage et assemblage
NF P38-301:2013 Light transmitting single skin profiled plastics sheets for internal and external roofs, walls and ceilings - Requirements and test methods
NF P38-301/IN1*NF EN 1013/IN1:2014 Light transmitting single skin profiled plastics sheets for internal and external roofs, walls and ceilings - Requirements and test methods
NF P38-301*NF EN 1013+A1:2014 Light transmitting single skin profiled plastics sheets for internal and external roofs, walls and ceilings - Requirements and test methods
NF A49-785-1*NF EN ISO 10893-1:2011 Non-destructive testing of steel tubes - Part 1 : automated electromagnetic testing of seamless and welded (except submerged arc-welded) steel tubes for the verification of hydraulic leaktightness
NF EN ISO 9241-220:2019 Ergonomie de l'intéraction homme-système - Partie 220 : processus de validation, d'éxécution et d'évaluation de la conception centrée sur l'opérateur humain au sein des organisations
NF S98-052-2/A1:2014 Packaging for terminally sterilized medical devices - Part 2 : validation requirements for forming, sealing and assembly processes - Amendment 1
NF EN ISO 11607-2/A11:2022 Emballages des dispositifs médicaux stérilisés au stade terminal - Partie 2 : exigences de validation pour les procédés de formage, scellage et assemblage - Amendement A11
NF A03-011-3*NF EN ISO 148-3:2017 Metallic materials - Charpy pendulum impact test - Part 3 : preparation and characterization of Charpy V-notch test pieces for indirect verification of pendulum impact machines
NF A04-307:1981 IRON AND STEEL. ULTRASONIC INTERNAL DEFECT DETECTION IN LONG PRODUCTS EXCLUDING BEAMS,RAILS AND SIMILAR SECTION (MANUAL INSPECTION).

Lithuanian Standards Office , Internal and external validation of the model

LST EN ISO 15536-2:2007 Ergonomics - Computer manikins and body templates - Part 2: Verification of functions and validation of dimensions for computer manikin systems (ISO 15536-2:2007)
LST EN ISO 17450-1:2012 Geometrical product specifications (GPS) - General concepts - Part 1: Model for geometrical specification and verification (ISO 17450-1:2011)
LST EN ISO 11546-2:2010 Acoustics - Determination of sound insulation performances of enclosures - Part 2: Measurements in situ (for acceptance and verification purposes) (ISO 11546-2:1995)
LST EN ISO 10360-4:2001 Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 4: CMMs used in scanning measuring mode (ISO 10360-4:2000)
LST EN ISO 11607-2:2006 Packaging for terminally sterilized medical devices - Part 2: Validation requirements for forming, sealing and assembly processes (ISO 11607-2:2006)
LST EN ISO 13791:2012 Thermal performance of buildings - Calculation of internal temperatures of a room in summer without mechanical cooling - General criteria and validation procedures (ISO 13791:2012)
LST EN ISO 10360-4:2001/AC:2004 Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 4: CMMs used in scanning measuring mode (ISO 10360-4:2000/Cor.1:2002)

AENOR, Internal and external validation of the model

UNE-EN ISO 15536-2:2007 Ergonomics - Computer manikins and body templates - Part 2: Verification of functions and validation of dimensions for computer manikin systems (ISO 15536-2:2007)
UNE-EN ISO 11546-2:2010 Acoustics - Determination of sound insulation performances of enclosures - Part 2: Measurements in situ (for acceptance and verification purposes) (ISO 11546-2:1995)
UNE-EN ISO 10360-4:2001 Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 4: CMMs used in scanning measuring mode. (ISO 10360-4:2000)

German Institute for Standardization, Internal and external validation of the model

DIN EN ISO 15536-2:2007-06 Ergonomics - Computer manikins and body templates - Part 2: Verification of functions and validation of dimensions for computer manikin systems (ISO 15536-2:2007); German version EN ISO 15536-2:2007
DIN EN ISO 17450-1:2012-04 Geometrical product specifications (GPS) - General concepts - Part 1: Model for geometrical specification and verification (ISO 17450-1:2011); German version EN ISO 17450-1:2011
DIN 863-4:1999 Verification of geometrical parameters - Micrometers - Part 4: Internal micrometers; concepts, requirements, testing
DIN 863-3:1999 Verification of geometrical parameters - Micrometers - Part 3: Special design micrometer callipers for external measurement; characteristics, requirements, testing
DIN EN ISO 11546-2:2010-01 Acoustics - Determination of sound insulation performances of enclosures - Part 2: Measurements in situ (for acceptance and verification purposes) (ISO 11546-2:1995); German version EN ISO 11546-2:2009
DIN 863-1:2017-02 Verification of geometrical parameters - Micrometers - Part 1: Standard design micrometer callipers for external measurement; concepts, requirements, testing
DIN 863-1:1999 Verification of geometrical parameters - Micrometers - Part 1: Standard design micrometer callipers for external measurement; concepts, requirements, testing
DIN 158-1:1997-06 Metric external taper screw threads and mating internal parallel screw threads - Part 1: Nominal sizes, limit deviations, limits of size and verification
DIN EN ISO 16140-6:2020 Microbiology of the food chain - Method validation - Part 6: Protocol for the validation of alternative (proprietary) methods for microbiological confirmation and typing procedures (ISO 16140-6:2019)
DIN 158-1:1997 Metric external taper screw threads and mating internal parallel screw threads - Part 1: Nominal sizes, limit deviations, limits of size and verification
DIN 863-2:1999 Verification of geometrical parameters - Micrometers - Part 2: Micrometer callipers heads, Depth micrometer; concepts, requirements, testing
DIN EN 934-6:2019 Admixtures for concrete, mortar and grout - Part 6: Sampling, assessment and verification of the constancy of performance
DIN EN 934-6:2017 Admixtures for concrete, mortar and grout - Part 6: Sampling, assessment and verification of the constancy of performance; German and English version prEN 934-6:2017
DIN EN 934-6:2019-05 Admixtures for concrete, mortar and grout - Part 6: Sampling, assessment and verification of the constancy of performance; German version EN 934-6:2019
DIN ISO 14:1986-12 Straigth-sided splines for cylindrical shafts with internal centering; dimensions, tolerances and verification; identical with ISO 14, edition 1982
DIN EN ISO 11607-2:2020-05 Packaging for terminally sterilized medical devices - Part 2: Validation requirements for forming, sealing and assembly processes (ISO 11607-2:2019); German version EN ISO 11607-2:2020 / Note: To be amended by DIN EN ISO 11607-2/A1 (2022-08).
DIN EN ISO 11607-2/A11:2022-08 Packaging for terminally sterilized medical devices - Part 2: Validation requirements for forming, sealing and assembly processes (ISO 11607-2:2019); German version EN ISO 11607-2:2020/A11:2022
DIN 18168-2:2008 Ceiling linings and suspended ceilings with gypsum plasterboards - Part 2: Verification of the load-carrying capacity of metal sub-constructions and metal suspending rods
DIN 4102-20:2017-10 Fire behaviour of building materials and building components - Part 20: Complementary verification for the assessment of the fire behaviour of external wall claddings
DIN 4109-33:2016 Sound insulation in buildings - Part 33: Data for verification of sound insulation (component catalogue) - Timber construction, lightweight construction and dry walling
DIN CEN/TR 16303-3:2012 Road restraint systems - Guidelines for computational mechanics of crash testing against vehicle restraint system - Part 3: Test Item Modelling and Verification; German version CEN/TR 16303-3:2012
DIN 32876-1:1999 Verification of geometrical parameters - Electrical linear measurement - Part 1: Analogue reception of the measured quantity; concepts, requirements, testing
DIN EN ISO 11607-2:2020 Packaging for terminally sterilized medical devices - Part 2: Validation requirements for forming, sealing and assembly processes (ISO 11607-2:2019)
DIN EN ISO 11607-2:2017 Packaging for terminally sterilized medical devices - Part 2: Validation requirements for forming, sealing and assembly processes (ISO/DIS 11607-2:2017); German and English version prEN ISO 11607-2:2017
DIN EN 13486:2022-08 Temperature recorders and thermometers for measuring the ambient or internal temperature for the transport, storage and distribution of temperature sensitive goods - Periodic verification; German and English version prEN 13486:2022 / Note: Date of issu...

British Standards Institution (BSI), Internal and external validation of the model

21/30415510 DC BS ISO 21474-2. In vitro diagnostic medical devices. Multiplex molecular testing for nucleic acids. Part 2. Validation and verification
PD ISO/TS 27878:2023 Reproducibility of the level of detection (LOD) of binary methods in collaborative and in-house validation studies
BS EN 1264-2:2008 Water based surface embedded heating and cooling systems - Part 2: Floor heating: Prove methods for the determination of the thermal output using calculation and test methods

IN-BIS, Internal and external validation of the model

IS 10201 Pt.6-1988

American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE), Internal and external validation of the model

ASHRAE OR-05-5-2-2005 External Coupling between CFD and Energy Simulation: Implementation and Validation

Korean Agency for Technology and Standards (KATS), Internal and external validation of the model

KS B ISO 17450-1:2020 Geometrical product specifications(GPS) — General concepts —Part 1: Model for geometrical specification and verification
KS B ISO 17450-1:2014 Geometrical Product Specifications(GPS)-General concepts-Part 1:Model for geometrical specification and verification
KS B ISO 17450-1:2011 Geometrical Product Specifications(GPS)-General concepts-Part 1:Model for geometrical specification and verification
KS B ISO 17450-1:2015 Geometrical Product Specifications(GPS) — General concepts — Part 1: Model for geometrical specification and verification
KS P ISO 11607-2:2021 Packaging for terminally sterilized medical devices —Part 2: Validation requirements for forming, sealing and assembly processes
KS P ISO 11607-2:2018 Packaging for terminally sterilized medical devices — Part 2: Validation requirements for forming, sealing and assembly processes
KS B ISO 10893-1:2018 Non-destructive testing of steel tubes — Part 1: Automated electromagnetic testing of seamless and welded (except submerged arc-welded) steel tubes for the verification of hydraulic leaktightness
KS B ISO 10360-4:2019 Geometrical Product Specifications(GPS) — Acceptance and reverification tests for coordinate measuring machines(CMM) — Part 4: CMMs used in scanning measuring mode

KR-KS, Internal and external validation of the model

KS B ISO 17450-1-2020 Geometrical product specifications(GPS) — General concepts —Part 1: Model for geometrical specification and verification
KS B 5544-2003(2023)
KS P ISO 11607-2-2021 Packaging for terminally sterilized medical devices —Part 2: Validation requirements for forming, sealing and assembly processes
KS P ISO 11607-2-2018 Packaging for terminally sterilized medical devices — Part 2: Validation requirements for forming, sealing and assembly processes
KS B ISO 10893-1-2018 Non-destructive testing of steel tubes — Part 1: Automated electromagnetic testing of seamless and welded (except submerged arc-welded) steel tubes for the verification of hydraulic leaktightness
KS B ISO 10360-4-2019 Geometrical Product Specifications(GPS) — Acceptance and reverification tests for coordinate measuring machines(CMM) — Part 4: CMMs used in scanning measuring mode

ES-UNE, Internal and external validation of the model

UNE-EN ISO 17450-1:2015 Geometrical product specifications (GPS) - General concepts - Part 1: Model for geometrical specification and verification (ISO 17450-1:2011)
UNE-EN 934-6:2019 Admixtures for concrete, mortar and grout - Part 6: Sampling, assessment and verification of the constancy of performance
UNE-EN ISO 11607-2:2020 Packaging for terminally sterilized medical devices - Part 2: Validation requirements for forming, sealing and assembly processes (ISO 11607-2:2019)
UNE-EN ISO 11607-2:2020/A11:2022 Packaging for terminally sterilized medical devices - Part 2: Validation requirements for forming, sealing and assembly processes (ISO 11607-2:2019)

ETSI - European Telecommunications Standards Institute, Internal and external validation of the model

ETR 293-2-1998 Terrestrial Trunked Radio (TETRA); Air Interface (AI) Layer 2 and 3 Protocol Validation; Part 2: Validation of SDL Models for Packet Data Optimized (PDO)
ETR 293-1-1997 Radio Equipment and Systems (RES); Trans-European Trunked Radio (TETRA); Air Interface (AI) Layer 2 and 3 Protocol Validation; Part 1: Validation of SDL Models for Voice Plus Data (V+D)

RU-GOST R, Internal and external validation of the model

GOST R ISO 15536-2-2010 Ergonomics. Computer manikins and body templates. Part 2. Verification of functions and Validation of dimensions for Computer manikin systems
GOST R 55070-2012 Fiberglass reinforced thermosetting plastic pipes and parts of pipelines. Methods to prove the leak tightness under short-term internal pressure

US-CFR-file, Internal and external validation of the model

CFR 6-37.27-2014 Domestic security. Part37:REAL ID driver’s licenses and identification cards. Subpart B:Minimum documentation, verification, and card issuance requirements. Section37.27:Driver’s licenses and identification cards issued during the age-based enrollment Per
CFR 9-590.915-2014 Animals and animal products. Part590:Inspection of eggs and egg products (egg products inspection act). Section590.915:Foreign inspection certificate requirements.
CFR 46-115.114-2014 Shipping. Part115:Inspection and certification. Section115.114:Alternative requirements for a vessel operating as other than a small passenger vessel.

GB-REG, Internal and external validation of the model

REG NASA-LLIS-1010-1997 Lessons Learned ?Space Shuttle Program/Super Light Weight External Tank/Materials& Test and Verification Changes

未注明发布机构, Internal and external validation of the model

DIN EN ISO 9455-6 Berichtigung:2023 Fluxes for soft soldering – Test methods – Part 6: Determination and verification of the halide content (except fluoride)
BS 1610-1:1992(1999) Materials testing machines and force verification equipment — Part 1 : Specification for the grading of the forces applied by materials testing machines whenused inthe compression mode

VN-TCVN, Internal and external validation of the model

TCVN 6999-2002 Road vehicles.External projections from two or three-wheel motorcycles and mopeds.Requirements and test methods in type approval

CH-SNV, Internal and external validation of the model

SN EN ISO 16140-6:2021 Microbiology of the food chain - Method validation - Part 6: Protocol for the validation of alternative (proprietary) methods for microbiological confirmation and typing procedures (ISO 16140-6:2019)

CEN - European Committee for Standardization, Internal and external validation of the model

PREN 934-6-2017 Admixtures for concrete@ mortar and grout - Part 6: Sampling@ assessment and verification of the constancy of performance

BG-BDS, Internal and external validation of the model

BGC IEC 60079-1:2000 Electrical apparatus for explosive gas atmospheres-Part 1:Construction and verification test of flameproof enclosures of electrical apparatus

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Internal and external validation of the model

GB/Z 24637.1-2009 Geometrical Product Specifications(GPS).General concepts.Part 1:Model for geometrical specification and verification

European Committee for Standardization (CEN), Internal and external validation of the model

PD CEN/TR 16303-3:2012 Road restraint systems - Guidelines for computational mechanics of crash testing against vehicle restraint system - Part 3: Test Item Modelling and Verification
EN 10246-2:2000 Non-Destructive Testing of Steel Tubes - Part 2: Automatic Eddy Current Testing of Seamless and Welded (Except Submerged Arc-Welded) Austenitic and Austenitic-Ferritic Steel Tubes for Verififcation of Hydraulic Leak-Tightness

ANSI - American National Standards Institute, Internal and external validation of the model

X9/TG-19-1-1999 TG-19@ Part 1: Modes of Operation Validation System for the Triple Data Encryption Algorithm (TMOVS): Requirements and Procedures

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Internal and external validation of the model

GB/T 35656-2017 Guideline for verification and validation of chemical analysis method and internal quality control—Method on reporting qualitative test reports
GB/T 35657-2017 Guideline for verification and validation of chemical analysis method and internal quality control－Metal component analysis based on sample digestion

GOSTR, Internal and external validation of the model

GOST ISO 11607-2-2018 Packaging for terminally sterilized medical devices. Part 2. Validation requirements for forming, sealing and assembly processes

Japanese Industrial Standards Committee (JISC), Internal and external validation of the model

JIS B 7440-4:2003 Geometrical Product Specifications (GPS) -- Acceptance and reverification tests for coordinate measuring machines (CMM) -- Part 4: CMMs used in scanning measuring mode

AT-ON, Internal and external validation of the model

ONORM EN 20140-2-1993 Acoustics - Measurement of sound insulation in buildings and of building elements - Part 2: Determination, verification and application of precision data (ISO 140-2:1991)

PL-PKN, Internal and external validation of the model

PN-EN ISO 11607-2-2020-06 P Packaging for terminally sterilized medical devices -- Part 2: Validation requirements for forming, sealing and assembly processes (ISO 11607-2:2019)

TIA - Telecommunications Industry Association, Internal and external validation of the model

TSB-88.3-C-2008 Wireless Communications Systems Performance in Noise and Interference Limited Situations Part 3: Performance Verification (Includes Access to Additional Content)

IX-ECMA, Internal and external validation of the model

ECMA 219-1996 Authentication and Privilege Attribute Security Application with related key distribution functions - Part 1: Overview and Functional Model - Part 2: Security Information Objects - Part 3: Service Definitions (2nd Edition)