ZH

RU

ES

Petroleum Method Validation

Petroleum Method Validation, Total:500 items.

In the international standard classification, Petroleum Method Validation involves: Waxes, bituminous materials and other petroleum products, Fuels, Lubricants, industrial oils and related products, Petroleum products in general, Crude petroleum, Insulating fluids, Construction materials, Non-metalliferous minerals, Extraction and processing of petroleum and natural gas, Pipeline components and pipelines, Paper and board, Plastics, Analytical chemistry, Inorganic chemicals, Petroleum, petroleum products and natural gas handling equipment, Measurement of volume, mass, density, viscosity, Fluid storage devices, Equipment for petroleum and natural gas industries, Protection against fire, Metrology and measurement in general, Electric road vehicles, Occupational safety. Industrial hygiene, Hydraulic fluids, Test conditions and procedures in general, Kitchen equipment, Water quality, Raw materials for rubber and plastics, Coals, Paint ingredients, Protection against crime, Organic chemicals, Thermodynamics and temperature measurements.


American Society for Testing and Materials (ASTM), Petroleum Method Validation

  • ASTM D1551-68 Method of Test for Sulfur in Petroleum Oils (Quartz-Tube Method)
  • ASTM D721-68(1982) Standard Test Method for Oil Content of Petroleum Waxes
  • ASTM D721-97 Standard Test Method for Oil Content of Petroleum Waxes
  • ASTM D721-17 Standard Test Method for Oil Content of Petroleum Waxes
  • ASTM D721-02a Standard Test Method for Oil Content of Petroleum Waxes
  • ASTM D721-02 Standard Test Method for Oil Content of Petroleum Waxes
  • ASTM D721-06 Standard Test Method for Oil Content of Petroleum Waxes
  • ASTM D721-05 Standard Test Method for Oil Content of Petroleum Waxes
  • ASTM D721-04 Standard Test Method for Oil Content of Petroleum Waxes
  • ASTM D721-06(2011) Standard Test Method for Oil Content of Petroleum Waxes
  • ASTM D97-05a Standard Test Method for Pour Point of Petroleum Products
  • ASTM UOP41-07 Doctor Test for Petroleum Distillates
  • ASTM D1321-97 Standard Test Method for Needle Penetration of Petroleum Waxes
  • ASTM C1124-90(2004)e1 Standard Test Method for Kerosene Retention of Asbestos
  • ASTM D937-97 Standard Test Method for Cone Penetration of Petrolatum
  • ASTM D937-97(2002) Standard Test Method for Cone Penetration of Petrolatum
  • ASTM D97-87e1 Standard Test Method for Pour Point of Petroleum Oils
  • ASTM D1833-87(2007) Standard Test Method for Odor of Petroleum Wax
  • ASTM D1321-16 Standard Test Method for Needle Penetration of Petroleum Waxes
  • ASTM D1321-10(2015) Standard Test Method for Needle Penetration of Petroleum Waxes
  • ASTM D5442-93(2003)e1 Standard Test Method for Analysis of Petroleum Waxes by Gas Chromatography
  • ASTM D5442-93(2008) Standard Test Method for Analysis of Petroleum Waxes by Gas Chromatography
  • ASTM D1552-08 Standard Test Method for Sulfur in Petroleum Products (High-Temperature Method)
  • ASTM D1267-95(2001)e1 Standard Test Method for Gage Vapor Pressure of Liquefied Petroleum (LP) Gases (LP-Gas Method)
  • ASTM D1267-95 Standard Test Method for Gage Vapor Pressure of Liquefied Petroleum (LP) Gases (LP-Gas Method)
  • ASTM D1267-02 Standard Test Method for Gage Vapor Pressure of Liquefied Petroleum (LP) Gases (LP-Gas Method)
  • ASTM D1267-02(2007) Standard Test Method for Gage Vapor Pressure of Liquefied Petroleum (LP) Gases (LP-Gas Method)
  • ASTM D6892-03(2008) Standard Test Method for Pour Point of Petroleum Products (Robotic Tilt Method)
  • ASTM D1833-87(1999) Standard Test Method for Odor of Petroleum Wax
  • ASTM D590-93(2002) Standard Test Method for Petroleum Wax in Paper
  • ASTM D1465-90(2000) Standard Test Method for Blocking and Picking Points of Petroleum Wax
  • ASTM D570-95 Standard Test Method for Water Absorption of Plastics
  • ASTM D6854-12a Standard Test Method for Silica-Oil Absorption Number
  • ASTM D5709-95(2000)e1 Standard Test Method for Sieve Analysis of Petroleum Coke
  • ASTM D1465-90(1995)e1 Standard Test Method for Blocking and Picking Points of Petroleum Wax
  • ASTM D3944-88(1993)e1 Standard Test Method for Solidification Point of Petroleum Wax
  • ASTM D97-05 Standard Test Method for Pour Point of Petroleum Products
  • ASTM D97-17b Standard Test Method for Pour Point of Petroleum Products
  • ASTM D590-93(1997) Standard Test Method for Petroleum Wax in Paper
  • ASTM D5709-95(2005) Standard Test Method for Sieve Analysis of Petroleum Coke
  • ASTM D5985-08 Standard Test Method for Pour Point of Petroleum Products (Rotational Method)
  • ASTM D1833-87(2012) Standard Test Method for Odor of Petroleum Wax
  • ASTM D1465-10(2021) Standard Test Method for Blocking and Picking Points of Petroleum Wax
  • ASTM D97-17a Standard Test Method for Pour Point of Petroleum Products
  • ASTM D6892-03(2020) Standard Test Method for Pour Point of Petroleum Products (Robotic Tilt Method)
  • ASTM D5985-02(2020) Standard Test Method for Pour Point of Petroleum Products (Rotational Method)
  • ASTM D1833-87(2017) Standard Test Method for Odor of Petroleum Wax
  • ASTM D5709-09 Standard Test Method for Sieve Analysis of Petroleum Coke
  • ASTM D1266-98(2003)e1 Standard Test Method for Sulfur in Petroleum Products (Lamp Method)
  • ASTM D1266-98 Standard Test Method for Sulfur in Petroleum Products (Lamp Method)
  • ASTM D2001-92(2002) Standard Test Method for Depentanization of Gasoline and Naphthas
  • ASTM D2001-07(2012) Standard Test Method for Depentanization of Gasoline and Naphthas
  • ASTM D1267-12 Standard Test Method for Gage Vapor Pressure of Liquefied Petroleum (LP) Gases (LP-Gas Method)
  • ASTM D7689-11 Standard Test Method for Cloud Point of Petroleum Products (Mini Method)
  • ASTM D97-04 Standard Test Method for Pour Point of Petroleum Products
  • ASTM D97-96a Standard Test Method for Pour Point of Petroleum Products
  • ASTM D97-02 Standard Test Method for Pour Point of Petroleum Products
  • ASTM D94-07 Standard Test Methods for Saponification Number of Petroleum Products
  • ASTM D97-06 Standard Test Method for Pour Point of Petroleum Products
  • ASTM D3427-07 Standard Test Method for Air Release Properties of Petroleum Oils
  • ASTM D3427-99 Standard Test Method for Air Release Properties of Petroleum Oils
  • ASTM C1124-90(1999) Standard Test Method for Kerosene Retention of Asbestos
  • ASTM D3427-03 Standard Test Method for Air Release Properties of Petroleum Oils
  • ASTM D3427-06 Standard Test Method for Air Release Properties of Petroleum Oils
  • ASTM D482-03 Standard Test Method for Ash from Petroleum Products
  • ASTM D97-09 Standard Test Method for Pour Point of Petroleum Products
  • ASTM D286-30 Method of Test for Autogenous Ignition Temperatures of Petroleum Products
  • ASTM D1018-00 Standard Test Method for Hydrogen In Petroleum Fractions
  • ASTM D86-90e2 Standard Test Method for Distillation of Petroleum Products
  • ASTM D97-11 Standard Test Method for Pour Point of Petroleum Products
  • ASTM D86-93 Standard Test Method for Distillation of Petroleum Products
  • ASTM D86-96 Standard Test Method for Distillation of Petroleum Products
  • ASTM D6854-15 Standard Test Method for Silica-Oil Absorption Number
  • ASTM D97-17b(2022) Standard Test Method for Pour Point of Petroleum Products
  • ASTM D482-19 Standard Test Method for Ash from Petroleum Products
  • ASTM D524-15(2019) Standard Test Method for Ramsbottom Carbon Residue of Petroleum Products
  • ASTM C1124/C1124M-90(2015) Standard Test Method for Kerosene Retention of Asbestos
  • ASTM D1321-16a Standard Test Method for Needle Penetration of Petroleum Waxes
  • ASTM D2500-16 Standard Test Method for Cloud Point of Petroleum Products
  • ASTM D3944-12(2017) Standard Test Method for Solidification Point of Petroleum Wax
  • ASTM D482-12 Standard Test Method for Ash from Petroleum Products
  • ASTM D482-13 Standard Test Method for Ash from Petroleum Products
  • ASTM C1124/C1124M-90(2009)e1 Standard Test Method for Kerosene Retention of Asbestos
  • ASTM D3427-12 Standard Test Method for Air Release Properties of Petroleum Oils
  • ASTM D1321-10 Standard Test Method for Needle Penetration of Petroleum Waxes
  • ASTM D97-15 Standard Test Method for Pour Point of Petroleum Products
  • ASTM D97-16 Standard Test Method for Pour Point of Petroleum Products
  • ASTM D97-12 Standard Test Method for Pour Point of Petroleum Products
  • ASTM D97-17 Standard Test Method for Pour Point of Petroleum Products
  • ASTM D524-09 Standard Test Method for Ramsbottom Carbon Residue of Petroleum Products
  • ASTM D287-92 Standard Test Method for API Gravity of Crude Petroleum and Petroleum Products (Hydrometer Method)
  • ASTM D287-92(2000)e1 Standard Test Method for API Gravity of Crude Petroleum and Petroleum Products (Hydrometer Method)
  • ASTM D287-12b(2019) Standard Test Method for API Gravity of Crude Petroleum and Petroleum Products (Hydrometer Method)
  • ASTM D287-22 Standard Test Method for API Gravity of Crude Petroleum and Petroleum Products (Hydrometer/Method)
  • ASTM D1266-18 Standard Test Method for Sulfur in Petroleum Products (Lamp Method)
  • ASTM D2001-92(1997) Standard Test Method for Depentanization of Gasoline and Naphthas
  • ASTM D2001-07 Standard Test Method for Depentanization of Gasoline and Naphthas
  • ASTM D2001-07(2017) Standard Test Method for Depentanization of Gasoline and Naphthas
  • ASTM D5442-93(1998) Standard Test Method for Analysis of Petroleum Waxes by Gas Chromatography
  • ASTM D5442-93(2013) Standard Test Method for Analysis of Petroleum Waxes by Gas Chromatography
  • ASTM D7683-11 Standard Test Method for Cloud Point of Petroleum Products (Small Test Jar Method)
  • ASTM D2500-99 Standard Test Method for Cloud Point of Petroleum Products
  • ASTM D1160-02a Standard Test Method for Distillation of Petroleum Products at Reduced Pressure
  • ASTM D1160-02 Standard Test Method for Distillation of Petroleum Products at Reduced Pressure
  • ASTM D1160-99 Standard Test Method for Distillation of Petroleum Products at Reduced Pressure
  • ASTM D3427-02 Standard Test Method for Air Release Properties of Petroleum Oils
  • ASTM D2500-05 Standard Test Method for Cloud Point of Petroleum Products
  • ASTM D94-02 Standard Test Methods for Saponification Number of Petroleum Products
  • ASTM D87-04 Standard Test Method for Melting Point of Petroleum Wax (Cooling Curve)
  • ASTM D1832-04(2009) Standard Test Method for Peroxide Number of Petroleum Wax
  • ASTM D94-00 Standard Test Methods for Saponification Number of Petroleum Products
  • ASTM D937-04 Standard Test Method for Cone Penetration of Petrolatum
  • ASTM D482-01 Standard Test Method for Ash and Petroleum Products
  • ASTM D94-07(2012) Standard Test Methods for Saponification Number of Petroleum Products
  • ASTM D5709-22 Standard Test Method for Sieve Analysis of Petroleum Coke
  • ASTM D1160-12 Standard Test Method for Distillation of Petroleum Products at Reduced Pressure
  • ASTM D1160-13 Standard Test Method for Distillation of Petroleum Products at Reduced Pressure
  • ASTM D1018-11(2016) Standard Test Method for Hydrogen In Petroleum Fractions
  • ASTM D2500-09 Standard Test Method for Cloud Point of Petroleum Products
  • ASTM D2500-11 Standard Test Method for Cloud Point of Petroleum Products
  • ASTM D94-07(2017) Standard Test Methods for Saponification Number of Petroleum Products
  • ASTM D323-99a Standard Test Method for Vapor Pressure of Petroleum Products (Reid Method)
  • ASTM D323-20 Standard Test Method for Vapor Pressure of Petroleum Products (Reid Method)
  • ASTM D5191-18 Standard Test Method for Vapor Pressure of Petroleum Products (Mini Method)
  • ASTM D5191-06 Standard Test Method for Vapor Pressure of Petroleum Products (Mini Method)
  • ASTM D323-82e2 Standard Test Method for Vapor Pressure of Petroleum Products (Reid Method)
  • ASTM D323-20a Standard Test Method for Vapor Pressure of Petroleum Products (Reid Method)
  • ASTM D5985-02(2008) Standard Test Method for Pour Point of Petroleum Products (Rotational Method)
  • ASTM D5018-89(2004) Standard Test Method for Shear Viscosity of Coal-Tar and Petroleum Pitches
  • ASTM D2140-03 Standard Test Method for Carbon-Type Composition of Insulating Oils of Petroleum Origin
  • ASTM D5762-12 Standard Test Method for Nitrogen in Petroleum and Petroleum Products by Boat-Inlet Chemiluminescence
  • ASTM D5190-99 Standard Test Method for Vapor Pressure of Petroleum Products (Automatic Method)
  • ASTM D5190-01 Standard Test Method for Vapor Pressure of Petroleum Products (Automatic Method)
  • ASTM D5762-01 Standard Test Method for Nitrogen in Petroleum and Petroleum Products by Boat-Inlet Chemiluminescence
  • ASTM D5762-02 Standard Test Method for Nitrogen in Petroleum and Petroleum Products by Boat-Inlet Chemiluminescence
  • ASTM D3328-00 Standard Test Methods for Comparison of Waterborne Petroleum Oils by Gas Chromatography
  • ASTM D287-12b Standard Test Method for API Gravity of Crude Petroleum and Petroleum Products (Hydrometer Method)
  • ASTM D323-58(1968) Standard Method Of Test For Vapor Pressure Of Petroleum Products (Reid Method)
  • ASTM D5191-12 Standard Test Method for Vapor Pressure of Petroleum Products (Mini Method)
  • ASTM D6749-02(2018) Standard Test Method for Pour Point of Petroleum Products (Automatic Air Pressure Method)
  • ASTM D1552-08(2014)e1 Standard Test Method for Sulfur in Petroleum Products 40;High-Temperature Method41;
  • ASTM D5191-10a Standard Test Method for Vapor Pressure of Petroleum Products (Mini Method)
  • ASTM D3921-96 Standard Test Method for Oil and Grease and Petroleum Hydrocarbons in Water
  • ASTM D2501-91(2000) Standard Test Method for Calculation of Viscosity-Gravity Constant (VGC) of Petroleum Oils
  • ASTM D2501-91(2005) Standard Test Method for Calculation of Viscosity-Gravity Constant (VGC) of Petroleum Oils
  • ASTM D1935-65 Method of Test for Steam Emulsion of Electrical Insulating Oils of Petroleum Origin
  • ASTM D3921-96(2003)e1 Standard Test Method for Oil and Grease and Petroleum Hydrocarbons in Water
  • ASTM D2140-08(2017) Standard Practice for Calculating Carbon-Type Composition of Insulating Oils of Petroleum Origin
  • ASTM D5018-23 Standard Test Method for Shear Viscosity of Coal-Tar and Petroleum Pitches
  • ASTM D1160-03 Standard Test Method for Distillation of Petroleum Products at Reduced Pressure
  • ASTM D1837-01 Standard Test Method for Volatility of Liquefied Petroleum (LP) Gases
  • ASTM D1837-94 Standard Test Method for Volatility of Liquefied Petroleum (LP) Gases
  • ASTM D1837-02a Standard Test Method for Volatility of Liquefied Petroleum (LP) Gases
  • ASTM C1124-90(2004) Standard Test Method for Kerosene Retention of Asbestos
  • ASTM D1832-87(1999) Standard Test Method for Peroxide Number of Petroleum Wax
  • ASTM D1837-02a(2007) Standard Test Method for Volatility of Liquefied Petroleum (LP) Gases
  • ASTM D1018-00(2005) Standard Test Method for Hydrogen In Petroleum Fractions
  • ASTM D3235-97 Standard Test Method for Solvent Extractables in Petroleum Waxes
  • ASTM D86-04a Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure
  • ASTM D86-04 Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure
  • ASTM D1018-11 Standard Test Method for Hydrogen In Petroleum Fractions
  • ASTM D189-97 Standard Test Method for Conradson Carbon Residue of Petroleum Products
  • ASTM D189-01 Standard Test Method for Conradson Carbon Residue of Petroleum Products
  • ASTM D1160-18 Standard Test Method for Distillation of Petroleum Products at Reduced Pressure
  • ASTM D7946-19 Standard Test Method for Initial pH (i-pH)-Value of Petroleum Products
  • ASTM D4931-06(2017) Standard Test Method for Gross Moisture in Green Petroleum Coke
  • ASTM D3235-16e1 Standard Test Method for Solvent Extractables in Petroleum Waxes
  • ASTM D4422-19 Standard Test Method for Ash in Analysis of Petroleum Coke
  • ASTM D5384-14(2019) Standard Test Methods for Chlorine in Used Petroleum Products (Field Test Kit Method)
  • ASTM D4422-13 Standard Test Method for Ash in Analysis of Petroleum Coke
  • ASTM D3427-14 Standard Test Method for Air Release Properties of Petroleum Oils
  • ASTM D3427-14ae1 Standard Test Method for Air Release Properties of Petroleum Oils
  • ASTM D3427-14a Standard Test Method for Air Release Properties of Petroleum Oils
  • ASTM D3235-15 Standard Test Method for Solvent Extractables in Petroleum Waxes
  • ASTM D524-10 Standard Test Method for Ramsbottom Carbon Residue of Petroleum Products
  • ASTM D7683-20 Standard Test Method for Cloud Point of Petroleum Products and Liquid Fuels (Small Test Jar Method)
  • ASTM D7683-21 Standard Test Method for Cloud Point of Petroleum Products and Liquid Fuels (Small Test Jar Method)
  • ASTM D7683-17 Standard Test Method for Cloud Point of Petroleum Products and Liquid Fuels (Small Test Jar Method)
  • ASTM D6374-99(2009) Standard Test Method for Volatile Matter in Green Petroleum Coke Quartz Crucible Procedure
  • ASTM D3712-05 Standard Test Method of Analysis of Oil-Soluble Petroleum Sulfonates by Liquid Chromatography
  • ASTM D3712-05(2011) Standard Test Method of Analysis of Oil-Soluble Petroleum Sulfonates by Liquid Chromatography
  • ASTM D3650-93(2011) Standard Test Method for Comparison of Waterborne Petroleum Oils By Fluorescence Analysis
  • ASTM D5762-98 Standard Test Method for Nitrogen in Petroleum and Petroleum Products by Boat-Inlet Chemiluminescence
  • ASTM D5762-09 Standard Test Method for Nitrogen in Petroleum and Petroleum Products by Boat-Inlet Chemiluminescence
  • ASTM D5762-10 Standard Test Method for Nitrogen in Petroleum and Petroleum Products by Boat-Inlet Chemiluminescence
  • ASTM D5762-08 Standard Test Method for Nitrogen in Petroleum and Petroleum Products by Boat-Inlet Chemiluminescence
  • ASTM D5762-11 Standard Test Method for Nitrogen in Petroleum and Petroleum Products by Boat-Inlet Chemiluminescence
  • ASTM D117-10 Standard Guide for Sampling, Test Methods, and Specifications for Electrical Insulating Oils of Petroleum Origin
  • ASTM D5018-89(1999)e1 Standard Test Method for Shear Viscosity of Coal-Tar and Petroleum Pitches
  • ASTM D483-04 Standard Test Method for Unsulfonated Residue of Petroleum Plant Spray Oils
  • ASTM D483-00 Standard Test Method for Unsulfonated Residue of Petroleum Plant Spray Oils
  • ASTM D2140-08 Standard Practice for Calculating Carbon-Type Composition of Insulating Oils of Petroleum Origin
  • ASTM D117-02 Standard Guide for Sampling, Test Methods, and Specifications for Electrical Insulating Oils of Petroleum Origin
  • ASTM D483-04(2009)e1 Standard Test Method for Unsulfonated Residue of Petroleum Plant Spray Oils
  • ASTM D483-04(2018) Standard Test Method for Unsulfonated Residue of Petroleum Plant Spray Oils
  • ASTM D5018-18 Standard Test Method for Shear Viscosity of Coal-Tar and Petroleum Pitches
  • ASTM D2501-11 Standard Test Method for Calculation of Viscosity-Gravity Constant (VGC) of Petroleum Oils
  • ASTM D483-04(2014) Standard Test Method for Unsulfonated Residue of Petroleum Plant Spray Oils
  • ASTM D5018-89(2015)e1 Standard Test Method for Shear Viscosity of Coal-Tar and Petroleum Pitches
  • ASTM D5018-89(2009) Standard Test Method for Shear Viscosity of Coal-Tar and Petroleum Pitches
  • ASTM D5191-04a Standard Test Method for Vapor Pressure of Petroleum Products (Mini Method)
  • ASTM D1552-03 Standard Test Method for Sulfur in Petroleum Products (High-Temperature Method)
  • ASTM D5191-07 Standard Test Method for Vapor Pressure of Petroleum Products (Mini Method)
  • ASTM D2710-99 Standard Test Method for Bromine Index of Petroleum Hydrocarbons by Electrometric Titration
  • ASTM D1266-07 Standard Test Method for Sulfur in Petroleum Products (Lamp Method)
  • ASTM D1552-01 Standard Test Method for Sulfur in Petroleum Products (High-Temperature Method)
  • ASTM D1552-00 Standard Test Method for Sulfur in Petroleum Products (High-Temperature Method)
  • ASTM D129-00 Standard Test Method for Sulfur in Petroleum Products (General Bomb Method)
  • ASTM D5661-95(2001) Standard Test Method for Relative Solvency of Petroleum Oils by the PKP Method
  • ASTM D5191-01 Standard Test Method for Vapor Pressure of Petroleum Products (Mini Method)
  • ASTM D5191-99 Standard Test Method for Vapor Pressure of Petroleum Products (Mini Method)
  • ASTM D6897-03a Standard Test Method for Vapor Pressure of Liquefied Petroleum Gases (LPG) (Expansion Method)
  • ASTM D6897-03 Standard Test Method for Vapor Pressure of Liquefied Petroleum Gases (LPG) (Expansion Method)
  • ASTM D129-00(2005) Standard Test Method for Sulfur in Petroleum Products (General Bomb Method)
  • ASTM D5191-03 Standard Test Method for Vapor Pressure of Petroleum Products (Mini Method)
  • ASTM D129-64(1968) Standard Method Of Test For Sulfur In Petroleum Products By The Bomb Method
  • ASTM D6892-03 Standard Test Method for Pour Point of Petroleum Products (Robotic Tilt Method)
  • ASTM D7397-10 Standard Test Method for Cloud Point of Petroleum Products (Miniaturized Optical Method)
  • ASTM D5950-14(2020) Standard Test Method for Pour Point of Petroleum Products (Automatic Tilt Method)
  • ASTM D5442-17(2021) Standard Test Method for Analysis of Petroleum Waxes by Gas Chromatography
  • ASTM D1266-13 Standard Test Method for Sulfur in Petroleum Products (Lamp Method)
  • ASTM D1552-08(2014) Standard Test Method for Sulfur in Petroleum Products 40;High-Temperature Method41;
  • ASTM D2710-99(2004)e1 Standard Test Method for Bromine Index of Petroleum Hydrocarbons by Electrometric Titration
  • ASTM D323-08(2014) Standard Test Method for Vapor Pressure of Petroleum Products 40;Reid Method41;
  • ASTM D323-08 Standard Test Method for Vapor Pressure of Petroleum Products (Reid Method)
  • ASTM D1552-07 Standard Test Method for Sulfur in Petroleum Products (High-Temperature Method)
  • ASTM D5985-02(2014) Standard Test Method for Pour Point of Petroleum Products 40;Rotational Method41;
  • ASTM D5191-13 Standard Test Method for Vapor Pressure of Petroleum Products (Mini Method)
  • ASTM D5191-15 Standard Test Method for Vapor Pressure of Petroleum Products (Mini Method)
  • ASTM D5950-02(2007) Standard Test Method for Pour Point of Petroleum Products (Automatic Tilt Method)
  • ASTM D5950-12 Standard Test Method for Pour Point of Petroleum Products (Automatic Tilt Method)
  • ASTM D5191-10 Standard Test Method for Vapor Pressure of Petroleum Products (Mini Method)
  • ASTM D5191-10b Standard Test Method for Vapor Pressure of Petroleum Products (Mini Method)

British Standards Institution (BSI), Petroleum Method Validation

  • BS EN ISO 4257:2001 Methods of test for petroleum and its products. Liquefied petroleum gases. Method of sampling
  • BS 2000-179:1993 Methods of test for petroleum and its products. Determination of cone penetration of petrolatum
  • BS 2000-76:1993 Methods of test for petroleum and its products - Determination of congealing point of waxes and petrolatum
  • BS 2000-133:1993 Methods of test for petroleum and its products - Determination of drop melting point of wax and petrolatum
  • BS 2000-61:1993 Methods of test for petroleum and its products. Determination of sulfur. Bomb method
  • BS 2000-10:1995 Methods of test for petroleum and its products - Determination of kerosine burning characteristics - 24 hour method
  • BS 2000-315:1998 Methods of test for petroleum and its products - Petroleum products - Electrical insulating oils - Detection of corrosive sulfur
  • BS 2000-12:1993 Methods of test for petroleum and its products - Determination of specific energy
  • BS 2000-57:1995 Methods of test for petroleum and its products. Petroleum products. Determination of the smoke point of kerosine
  • BS EN ISO 13758:1997 Methods of test for petroleum and its products - Liquefied petroleum gases - Assessment of the dryness of propane - Valve freeze method
  • BS 2000-317:1995 Methods of test for petroleum and its products - Determination of residues in liquefied petroleum gases - Low temperature evaporation method
  • BS EN 15469:2007 Petroleum products - Test method for free water in liquefied petroleum gas by visual inspection
  • BS 2000-223:1993 Methods of test for petroleum and its products - Determination of ash of petroleum products containing mineral matter
  • BS ISO 12917-1:2002 Petroleum and liquid petroleum products - Calibration of horizontal cylindrical tanks - Manual methods
  • BS 2000-50:1993 Methods of test for petroleum and its products. Determination of cone penetration of lubricating grease
  • BS ISO 12917-1:2017 Petroleum and liquid petroleum products. Calibration of horizontal cylindrical tanks. Manual methods
  • BS 2000-15:1995 Methods of test for petroleum and its products - Petroleum products - Determination of pour point
  • BS EN ISO 13757:1996 Methods of test for petroleum and its products. Liquefied petroleum gases. Determination of oily residues. High temperature method
  • BS 2000-13:1994 Methods of test for petroleum and its products. Petroleum products. Determination of carbon residue. Conradson method
  • BS 2000-412:1996 Methods of test for petroleum and its products. Petroleum products. Determination of water separability of petroleum oils and synthetic fluids
  • BS 2000-276:1995 Methods of test for petroleum and its products - Petroleum products - Determination of base number - Perchloric acid potentiometric titration method
  • BS DD CEN ISO/TS 27469:2010 Petroleum, petrochemical and natural gas industries. Method of test for fire dampers
  • DD CEN ISO/TS 27469:2011 Petroleum, petrochemical and natural gas industries. Method of test for fire dampers
  • BS 2000-196:1997 Methods of test for petroleum and its products. Petroleum products. Determination of colour (ASTM scale)
  • BS EN ISO 3170:2004 Methods of test for petroleum and its products. BS 2000-475: Petroleum liquids. Manual sampling
  • BS 2000-306:1994 Methods of test for petroleum and its products - Determination of oxidation stability of straight mineral oil
  • BS 2000-306:2002 Methods of test for petroleum and its products - Determination of oxidation stability of straight mineral oil
  • BS 2000-14:1994 Methods of test for petroleum and its products. Petroleum products. Determination of carbon residue. Ramsbottom method
  • BS 2000-149:1993 Methods of test for petroleum and its products - Petroleum products - Lubricating oils and additives - Determination of phosphorus content - Quinoline phosphomolybdate method
  • BS EN ISO 12185:1996 Methods of test for petroleum and its products. Crude petroleum and petroleum products. Determination of density. Oscillating U-tube method
  • BS EN ISO 9029:1997 Methods of test for petroleum and its products. Crude petroleum. Determination of water. Distillation method
  • BS 2000-27:1993 Methods of test for petroleum and its products - Determination of distillation characteristics of cutback bitumen
  • BS 2000-132:1996 Methods of test for petroleum and its products. Petroleum products. Lubricating grease. Determination of dropping point
  • BS 2000-142:1993 Methods of test for petroleum and its products - Determination of oxidation stability of lubricating grease - Oxygen bomb method
  • BS 2000-163:1996 Methods of test for petroleum and its products - Petroleum products - Lubricating oils and additives - Determination of sulfated ash
  • BS 2000-375:1999 Methods of test for petroleum and its products - Petroleum products - Total sediment in residual fuel oils - Determination by hot filtration
  • BS 2000-313:2001 Methods of test for petroleum and its products - BS 2000-313:2001 Determination of air release of lubricating and hydraulic oils (Identical with IP 313:2001)
  • BS 2000-313:2003 Methods of test for petroleum and its products. Determination of air release of lubricating and hydraulic oils
  • BS ISO 3007:2002 Methods of test for petroleum and its products - BS 2000-69: Petroleum products - Determination of vapour pressure - Reid method
  • BS 2000-281:1993 Methods of test for petroleum and its products - Determination of anti-wear properties of hydraulic fluids - Vane pump method
  • BS ISO 3007:1999 Methods of test for petroleum and its products. BS 2000-69. Petroleum products. Determination of vapour pressure. Reid method
  • BS DD ISO/TS 27469:2010 Petroleum, petrochemical and natural gas industries - Method of test for fire dampers
  • BS EN ISO 3171:1999 Methods of test for petroleum and its products. BS 2000-476: Petroleum liquids. Automatic pipeline sampling
  • BS ISO 12828-2:2016 Validation methods for fire gas analyses. Intralaboratory validation of quantification methods
  • BS 2000-137:1993 Methods of test for petroleum and its products - Determination of oil content of water mix metalworking oil dilutions
  • BS 2000-220:1998 Methods of test for petroleum and its products - Petroleum products and lubricants - Determination of rust-prevention characteristics of lubricating greases
  • BS 2000-1:1995 Methods of test for petroleum and its products - Determination of acidity, neutralization value - Colour indicator titration method
  • BS 2000-35:1993 Methods of test for petroleum and its products - Determination of open flash and fire point - Pensky-Martens method
  • BS EN ISO 3262-14:2000 Extenders for paints - Specifications and methods of test - Cristobalite
  • BS 2000-195:1998 Methods of test for petroleum and its products - Determination of distillation characteristics of volatile organic liquids
  • BS EN 12177:2000 Methods of test for petroleum and its products - Liquid petroleum products - Unleaded petroleum - Determination of benzene content by gas chromatography
  • BS EN 12177:2002 Methods of test for petroleum and its products. Liquid petroleum products. Unleaded petroleum. Determination of benzene content by gas chromatography
  • BS EN 12177:2000(2002)*BS 2000-425:2002 Methods of test for petroleum and its products. Liquid petroleum products. Unleaded petroleum. Determination of benzene content by gas chromatography
  • BS 2000-272:2000 Methods of test for petroleum and its products - Determination of mercaptan sulfur and hydrogen sulfide content of liquefied petroleum gases (LPG) - Electrometric titration method
  • BS 2000-272:2002 Methods of test for petroleum and its products. Determination of mercaptan sulfur and hydrogen sulfide content of liquefied petroleum gases (LPG). Electrometric titration method
  • BS 2000-450:2000 Methods of test for petroleum and its products - Diesel fuel - Assessment of lubricity using the high-frequency reciprocating rig (HFRR) - Test method
  • BS 2000-213:1993 Methods of test for petroleum and its products - Determination of neutralization value of bitumen - Colour indicator titration method
  • BS 2000-139:1998 Methods of test for petroleum and its products - Petroleum products and lubricants - Determination of acid or base number - Colour-indicator titration method
  • BS 2000-130:1998 Methods of test for petroleum and its products - Petroleum products - Determination of bromine number of distillates and aliphatic olefins - Electrometric method
  • BS ISO 2909:2003 Methods of test for petroleum and its products - Petroleum products - Calculation of viscosity index from kinematic viscosity
  • BS EN 1425:2000 Methods of test for petroleum and its products - Bitumen and bituminous binders - Characterization of perceptible properties
  • BS 2000-107:1993 Methods of test for petroleum and its products - Determination of sulfur - Lamp combustion method
  • BS ISO 4268:2000 Petroleum and liquid petroleum products. Temperature measurements. Manual methods

KR-KS, Petroleum Method Validation

NL-NEN, Petroleum Method Validation

Professional Standard - Commodity Inspection, Petroleum Method Validation

  • SN 0042-1992 Method for inspection of PONA of naphtha for exportMethod for depentanization of gasoline and naphtha
  • SN 0041-1992 Method for inspection of PONA ofnaphtha for export
  • SN/T 0041.2-2011 Test method for PONA value of export naphtha part 2: Gasoline and naphtha depentanization method
  • SN/T 3017-2011 Standard test method for pour point of petroleum products. Automatic air pressure method
  • SN 0044-1992 Method for inspection of PONA of naphtha for exportMethod for isolation of represenlativesaturates fraction from low-olefinic petroleum naphtha
  • SN 0043-1992 Method for inspection of PONA of naphtha for exportMethod for test of olefinic plusaromatics hydrocarbons in petroleum distilates

Korean Agency for Technology and Standards (KATS), Petroleum Method Validation

  • KS M 2010-2008 Testing methods for flash point of crude oil and petroleum products-Determination of flash point-Tag closed cup method
  • KS M 2016-2008 Testing methods for pour point of crude oil and petroleum products
  • KS M 2010-1994 Testing methods for flash point crude oil and petroleum products
  • KS M 2012-2007(2022) Testing method for reaction of petroleum products
  • KS M 2061-2006(2021) Testing method for doctor test of petroleum products
  • KS M 2061-1986 Testing method for doctor test of petroleum products
  • KS M 2014-2004 Testing methods for kinematic viscosity and calculating method for viscosity index of crude oil and petroleum products
  • KS M 2014-1985 Testing methods for kinematic viscosity and calculating method for viscosity index of crude oil and petroleum products
  • KS M 2073-2011 Testing method for weathering of liquefied petroleum gas
  • KS M 2073-2011(2021) Testing method for weathering of liquefied petroleum gas
  • KS M 2073-1986 Testing method for weathering of liquefied petroleum gas
  • KS M ISO 6295-2003(2018)
  • KS M 2013-2007 Testing method for saybolt viscosity of crude oils and petroleum products
  • KS M 2057-2006 Crude petroleum and petroleum products-Determination and estimation of heat of combustion
  • KS M ISO 2160:2012 Petroleum products-Corrosiveness to copper-Copper strip test
  • KS M 2026-2007 Petroleum products-Testing methods for load carrying capacity
  • KS M 2012-2007 Testing method for reaction of petroleum products
  • KS M 2031-1-2008 Petroleum products-Determination of distillation characteristics at reduced pressure
  • KS M 2026-2018 Petroleum products — Testing methods for load carrying capacity
  • KS B 5348-2005(2020) LPG(Liquefied petroleum gas) dispensers:Test methods
  • KS M 2027-2021 Crude oil and petroleum products — Test methods of sulfur content
  • KS M 2069-2016(2021) Testing method for precipitation number of petroleum products
  • KS M 2027-1987 Crude oil and petroleum products — Test methods of sulfur content
  • KS M 2026-1987 Petroleum products — Testing methods for load carrying capacity
  • KS M 2106-2011 Petroleum products--Determination of colour(ASTM scale)
  • KS M 2029-2007(2017) Testing method for saybolt color of petroleum products
  • KS M 2029-1987 Testing method for saybolt color of petroleum products
  • KS M 2106-1986 Petroleum products--Determination of colour(ASTM scale)
  • KS M 2029-1982 Testing method for saybolt color of petroleum products
  • KS M 2013-2007(2022) Testing method for saybolt viscosity of crude oils and petroleum products
  • KS R 1141-2006(2011) Test methods of mixer for LPG automobiles
  • KS M 2029-2021 Petroleum product — Testing method for saybolt color
  • KS M 2962-2008 Standard test method for vapor pressure of petroleum products-Mini method
  • KS M 2963-2008 Test method for determination of components in petroleum products by gas chromatography
  • KS M 2107-2006(2021) Testing method for bromine number of petroleum product(color indicator method)
  • KS M 2107-2006(2016) Testing method for bromine number of petroleum product(color indicator method)
  • KS M 2414-2011(2021) Standard test method for sulfur in petroleum products (high-temperature method)
  • KS M 2962-2015(2020) Standard test method for vapor pressure of petroleum products-Mini method
  • KS M 2001-2005 Method of sampling crude oil and petroleum products
  • KS M 2001-1985 Method of sampling crude oil and petroleum products
  • KS M 2414-2011 Standard test method for sulfur in petroleum products (high-temperature method)
  • KS M ISO 2049:2012 Petroleum products-Determination of colour(ASTM scale)
  • KS M ISO 4259-3:2022 Petroleum and related products — Precision of measurement methods and results — Part 3: Monitoring and verification of published precision data in relation to methods of test
  • KS M ISO 12205-2003(2008) Petroleum products-Determination of the oxidation stability of middle-distillate fuels
  • KS M ISO 4268:2003 Petroleum and liquid petroleum products-Temperature measurement-Manual methods
  • KS M ISO 4268:2013 Petroleum and liquid petroleum products-Temperature measurement-Manual methods

Japanese Industrial Standards Committee (JISC), Petroleum Method Validation

  • JIS K 2276:1994 Petroleum products -- Testing methods for aviation fuels
  • JIS K 2252:1980 Testing method for reaction of petroleum products
  • JIS K 2291:2000 Petroleum products -- Testing methods for recovered sulphur
  • JIS K 2536:1996 Liquid petroleum products -- Testing method of components
  • JIS S 2101:1979 Test methods for gas appliances used with liquefied petroleum gas
  • JIS K 2269:1987 Testing methods for pour point and cloud point of crude oil and petroleum products

能源部, Petroleum Method Validation

RU-GOST R, Petroleum Method Validation

  • GOST 33157-2014 Petroleum products. Test method for vapor pressure of petroleum products (mini method)
  • GOST ISO 6251-2013 Liquefied petroleum gases. Copper strip test method
  • GOST 2517-2012 Petroleum and petroleum products. Methods of sampling
  • GOST 11851-1985 Petroleum. Method of paraffin determination
  • GOST R 52659-2006 Petroleum and petroleum products. Methods for manual sampling
  • GOST 1461-1975 Petroleum and petroleum products. Method of ash test
  • GOST 10364-1990 Petroleum and petroleum products. Method for determination of vanadium
  • GOST 31873-2012 Petroleum and petroleum products. Methods of manual sampling
  • GOST 26976-1986 Oil and petroleum products. Methods of mass measurement
  • GOST R 8.733-2011 State system for ensuring the uniformity of measurements. System for measuring of quantity and parameters of free oil gas. General metrological and technical requirements
  • PNST 155-2016 Petroleum products. Use of test methods for quality supporting
  • GOST 26378.0-1984 Used petroleum products. General requirements for the methods of the tests
  • GOST ISO 3675-2014 Crude petroleum and liquid petroleum products. Laboratory method for determination of density by hydrometer
  • GOST 2517-1985 Crude oil and petroleum products. Methods of sampling
  • GOST 2477-2014 Petroleum and petroleum products. Method for determination of water content

CU-NC, Petroleum Method Validation

  • NC 90-13-40-1987 Metrological Assurance. Polarimetric Quartz Plates. Methods and Means of Verifications
  • NC 90-04-18-1988 Standards System for Metrological Assurance. Tanker Truck for Oil and By-Products. Methods and Means of Verification
  • NC 33-53-1986 Oil and Oil Derivatives Liquated Gas. Testing Methods
  • NC 33-28-1984 Oil and Oil Derivatives. Determination of Density. Testing Methods
  • NC 33-24-1984 Oil and Oil Derivatives. Viscosity Index. Calculation Methods

BR-ABNT, Petroleum Method Validation

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Petroleum Method Validation

  • GB/T 540-1999 Test methods for oil-resisting asbestos-rubber sheets
  • GB/T 540-2008 Test methods for oil-resisting compressed asbestos fibre jointing
  • GB/T 6683-1997 Petroleum products--Determination of precision data in relation to methods of test
  • GB/T 6683.3-2023 Precision of measurement methods and results for petroleum and related products - Part 3: Monitoring and verification of published precision data for test methods

国家能源局, Petroleum Method Validation

  • SY/T 6466-2016 Evaluation procedure for high temperature property of set oilwell cement
  • SY/T 7393-2017 Validation of Subsea Facilities for the Oil and Gas Industry
  • SY/T 7432-2018 Petroleum Tailings Evaluation Methods

IN-BIS, Petroleum Method Validation

American National Standards Institute (ANSI), Petroleum Method Validation

CN-STDBOOK, Petroleum Method Validation

  • 图书 3-9678 Compilation of National Standards for Petroleum and Petroleum Products Test Methods 2020 (3)
  • 图书 3-9676 Compilation of National Standards for Test Methods of Petroleum and Petroleum Products 2020 (1)
  • 图书 3-9680 Compilation of National Standards for Test Methods of Petroleum and Petroleum Products 2020 (2)
  • 图书 3-9677 Compilation of National Standards for Test Methods of Petroleum and Petroleum Products 2020 (4)

API - American Petroleum Institute, Petroleum Method Validation

  • API STD 2545-1965 Gaging Petroleum and Petroleum Products@ Method of
  • API STD 2543-1965 Method of Measuring the Temperature of Petroleum and Petroleum Products
  • API MPMS 12.2.3-1998 Calculation of Petroleum Quantities - Section 2 - Calculation of Petroleum Quantities Using Dynamic Measurement Methods and Volumetric Correction Factors - Part 3 - Proving Reports (First Edition)
  • API MPMS 4.8-1995 Manual of Petroleum Measurement Standards Chapter 4 - Proving Systems Section 8 - Operation of Proving Systems

European Committee for Standardization (CEN), Petroleum Method Validation

  • EN 15469:2007 Petroleum products - Test method for free water in liquefied petroleum gas by visual inspection
  • CEN ISO/TS 27469:2011 Petroleum, petrochemical and natural gas industries - Method of test for fire dampers (ISO/TS 27469:2010)
  • EN ISO 4259-3:2020 Petroleum and related products - Precision of measurement methods and results - Part 3: Monitoring and verification of published precision data in relation to methods of test (ISO 4259-3:2020)

Association Francaise de Normalisation, Petroleum Method Validation

German Institute for Standardization, Petroleum Method Validation

  • DIN EN 15469:2008 Petroleum products - Test method for free water in liquefied petroleum gas by visual inspection; English version of DIN EN 15469:2008-02
  • DIN EN 15469:2008-02 Petroleum products - Test method for free water in liquefied petroleum gas by visual inspection; German version EN 15469:2007

TH-TISI, Petroleum Method Validation

  • TIS 1182.11-1998 Standard test methods for petroleum and petroleum product.part 11: distillation
  • TIS 1182.5-1995 Standard test methods for petroleum and petroleum products.part 5: vapour pressure.reid method
  • TIS 1182.14-1998 Standard test methods for petroleum and petroleum products.part 14: octane number by the research method
  • TIS 1182.6-1995 Standard test method for petroleum and petroleum products.part 6: determination of water
  • TIS 1182.7-1996 Standard test methods for petroleum and petroleum products.part 7: saybolt viscosity
  • TIS 1182.15-1998 Standard test method for petroleum and petroleum products.part 15: determination of sulfur content by lamp method
  • TIS 1182.9-1996 Standard test methods for petroleum and petroleum products.part 9: determination of phosphorus in gasoline
  • TIS 1182.10-1996 Standard test methods for petroleum and petroleum products.part 10: trace determination of lead in gasoline
  • TIS 1182.1-1993 Standard test methods for petroleum products.part 1: determination of lead content in gasoline.iodine monochloride method
  • TIS 1182.4-1995 Standard test methods for petroleum and petroleum products.part 4: rapid field test for trace lead in unleaded gasoline
  • TIS 1182.3-1994 Standard test methods for petroleum and petroleum products.part 3: determination of density, relative density or api gravity.hydrometer method
  • TIS 1182.17-1998 Standard test methods for petroleum and petroleum products.part 17: aromatics in gasoline by gas chromatography
  • TIS 1182.19-1999 Standard test method for petroleum and petroleum products.part 19: oxidation stability of gasoline by induction period method

Malaysia Standards, Petroleum Method Validation

  • MS 573-2000 Method of test for vapour pressure of liquefied petroleum gases (lpg method)(first revidion)
  • MS 845-1983

Natural Gas Processor's Association (NGPA), Petroleum Method Validation

GM Daewoo, Petroleum Method Validation

VN-TCVN, Petroleum Method Validation

  • TCVN 4547-1994 Barges for oil produsts.Method and means of verification
  • TCVN 6777-2007 Petroleum and petroleum products.Method for manual sampling
  • TCVN 2708-2007 Petroleum products.Test method for determination of sulfur (Lamp method)
  • TCVN 2690-2011 Standard Test Method for Ash from Petroleum Products
  • TCVN 3753-2011 Standard Test Method for Pour Point of Petroleum Products
  • TCVN 3165-2008 Liquefied petroleum (LP) gases.Test method for residues
  • TCVN 3569-1993 Petroleum and petroleum products.Methods for quantity determination in delivery by tanker
  • TCVN 5731-2010 Standard Test Method for Vapor Pressure of Petroleum Products (Reid Method)

Professional Standard - Petrochemical Industry, Petroleum Method Validation

GOSTR, Petroleum Method Validation

Professional Standard - Petroleum, Petroleum Method Validation

YU-JUS, Petroleum Method Validation

未注明发布机构, Petroleum Method Validation

Danish Standards Foundation, Petroleum Method Validation

CZ-CSN, Petroleum Method Validation

AR-IRAM, Petroleum Method Validation

Professional Standard-Safe Production, Petroleum Method Validation

  • AQ 2079-2020 General Rules for Certification and Inspection of Offshore Oil Production Facilities

Canadian General Standards Board (CGSB), Petroleum Method Validation

International Organization for Standardization (ISO), Petroleum Method Validation

  • ISO/TS 27469:2010 Petroleum, petrochemical and natural gas industries - Method of test for fire dampers
  • ISO 4259-3:2020 Petroleum and related products — Precision of measurement methods and results — Part 3: Monitoring and verification of published precision data in relation to methods of test

Taiwan Provincial Standard of the People's Republic of China, Petroleum Method Validation

Anhui Provincial Standard of the People's Republic of China, Petroleum Method Validation

  • DB34/T 2087-2014 Petroleum and petroleum products acid value determination method potentiometric titration

Professional Standard - Public Safety Standards, Petroleum Method Validation

  • GA/T 823.1-2018 Methods of Examination of Paint Evidence in Forensic Science Part 1: Color Comparison Test
  • GA/T 823.2-2009 Analysis method for paint fragment.Part 2:Infrared absorption spectrometry

Underwriters Laboratories (UL), Petroleum Method Validation





Copyright ©2007-2023 ANTPEDIA, All Rights Reserved