ZH
RU
ES

metal release agent

metal release agent, Total:498 items.

In the international standard classification, metal release agent involves: Dentistry, Protection of and in buildings, Inorganic chemicals, Shipbuilding and marine structures in general, Construction materials, Materials for aerospace construction, Non-metalliferous minerals, Mechanical structures for electronic equipment, Valves, Medical equipment, Rubber and plastics products, Textile fibres, Surface treatment and coating, Equipment for the chemical industry, Equipment for petroleum and natural gas industries, Fluid storage devices, Products of the chemical industry, Veterinary medicine, Fasteners, Paints and varnishes, Elements of buildings, Welding, brazing and soldering, Animal feeding stuffs, Adhesives, Structure and structure elements, Machine tool systems, Coatings and related processes used in aerospace industry, Analytical chemistry, Corrosion of metals, Ferroalloys, Heat pumps, Refrigerating technology, Continuous handling equipment, Paint ingredients, Printed circuits and boards, Rubber, Electrical wires and cables, Testing of metals, Heat recovery. Thermal insulation, Terminology (principles and coordination), Products of the textile industry, Explosion protection, Road vehicle systems, Lubricants, industrial oils and related products, Footwear, Petroleum products in general, Sterilization and disinfection, Conducting materials, Manufacturing forming processes, Wastes, Non-ferrous metals, Cutting tools, Air quality, Food products in general, Environmental protection, Vocabularies, Plastics, Test conditions and procedures in general, Insulation, Non-destructive testing, Aerosol containers, Water quality, Iron and steel products, Aircraft and space vehicles in general, Pesticides and other agrochemicals, Powder metallurgy.


Military Standard of the People's Republic of China-General Armament Department, metal release agent

  • GJB 446-1988 Adhesive 90° Peel Strength Test Method (Metal to Metal)
  • GJB 94-1986 Adhesives—Test Method for Uneven Peel Strength (Metal to Metal)
  • GJB 448-1988 Adhesive low temperature 90° peel strength test method (metal to metal)
  • GJB 447-1988 Adhesive high temperature 90° peel strength test method (metal to metal)
  • GJB 445-1988 Test method for high temperature tensile strength of adhesives (metal to metal)
  • GJB 444-1988 Test method for high temperature tensile shear strength of adhesives (metal-to-metal)

IEEE - The Institute of Electrical and Electronics Engineers@ Inc., metal release agent

American National Standards Institute （ANSI), metal release agent

KR-KS, metal release agent

Korean Agency for Technology and Standards (KATS), metal release agent

United States Navy, metal release agent

US-FCR, metal release agent

PL-PKN, metal release agent

Group Standards of the People's Republic of China, metal release agent

  • T/SHXCL 0003-2021 Inorganic metal-ion antibacterial and antiviral additives
  • T/CECS 10118-2021 reflective heat-insulating sheet metal
  • T/CECS 10283-2023 Aluminum-clad heat-insulating metal panels for buildings
  • T/CSBM 0011-2021 In Evaluation Method of Metal Ion Release in Medical Titanium Alloy Implants
  • T/CNS 47-2021 Test method for metallic ion dissolution rate in high temperature pressurized water of metallic materials used in nuclear power plants
  • T/CSEA 11-2019 Instructions for use of water-based metal cleaners
  • T/CFA 02020803-1-2014 The mould powder for the ductile iron pipe production with centrifugal water-cooling die mold process
  • T/SPSTS 017-2021 Clad metal strips for electrical connector of lithium-ion batteries
  • T/CAMMT 28-2020 Process Specification for Metal Surface Electrolysis and Plasma Polishing
  • T/CSTM 00364-2021 Clad metal strips for electrical connector of lithium-ion batteries
  • T/CFA 02020803.1-2019 The die powder for the ductile iron pipe production with centrifugal water-cooling die process
  • T/CAEPI 8-2017 Multivariate composite organic acid metal cleaner
  • T/GAMA 21-2021 Water immersion ultrasonic method for off-line inspection of additively manufactured metal components
  • T/CPCIF 0192-2022 Ru-Zn bimetallic catalyst for benzene to cyclohexene
  • T/LNWTA 009-2021 Standard for chromium ion content in brine for water treatment agent and diaphragm electrolysis to prepare sodium hypochlorite and chlor alkali
  • T/CASME 99-2022 Noble metal catalyst support High purity pseudoboehmite
  • T/LNIQA 008-2023 Passivating mcrobial agent for heavy metals in agricultural soil
  • T/CSTM 00469-2022 Biochar attapulgite compound for soil heavy metal passivator

Association Francaise de Normalisation, metal release agent

  • NF EN IEC 60475:2022 Méthode d'échantillonnage des liquides isolants
  • NF EN 13403:2003 Ventilation des bâtiments - Conduits non métalliques - Réseau de conduits en panneaux isolants de conduits
  • NF L17-300-2*NF EN 2243-2:2006 Aerospace series - Non-metallic materials - Structural adhesives - Test method - Part 2 : peel metal-metal
  • NF L17-300-2:1991 Aerospace series. Structural adhesives. Test methods. Part 2 : peel metal-metal.
  • NF EN 2243-2:2006 Série aérospatiale - Matériaux non-métalliques - Système d'adhésifs structuraux - Méthodes d'essai - Partie 2 : essai de pelage métal-métal
  • NF EN ISO 16535:2019 Produits isolants thermiques destinés aux applications du bâtiment - Détermination de l'absorption d'eau à long terme par immersion
  • NF V18-230:2009 Animal feeding stuffs - Isolation and enumeration of Pediococcus spp.
  • NF E29-492*NF EN 13397:2002 Industrial valves - Diaphragm valves made of metallic materials
  • NF L17-300-3*NF EN 2243-3:2006 Aerospace series - Non-metallic materials - Structural adhesives - Test method - Part 3 : peeling test metal-honeycomb core.
  • NF EN 2243-3:2006 Série aérospatiale - Matériaux non-métalliques - Système d'adhésifs structuraux - Méthodes d'essai - Partie 3 : essai de pelage métal-nid d'abeilles
  • NF EN 61099:2011 Liquides isolants - Spécifications relatives aux esters organiques de synthèse neufs destinés aux matériels électriques
  • NF EN IEC 60867:2022 Isolants liquides - Spécifications pour les liquides neufs à base d'hydrocarbures aromatiques de synthèse
  • NF C18-057:2022 Travaux sous tension - Dispositifs élévateurs isolants pour utilisation en milieu humide
  • NF EN ISO 3908:2009 Métaux-durs - Dosage du carbone insoluble (libre) - Méthode gravimétrique
  • NF EN 16711-1:2015 Textiles - Détermination de la teneur en métaux - Partie 1 : dosage des métaux par minéralisation par micro-ondes
  • NF EN 13479:2017 Produits consommables pour le soudage - Norme produit générale pour les métaux d'apport et les flux pour le soudage par fusion de matériaux métalliques
  • NF P34-900*NF EN 14509:2013 Self-supporting double skin metal faced insulating panels - Factory made products - Specifications
  • NF H44-042*NF EN 15006:2006 Metal aerosol containers - Aluminium containers - Dimensions of the 25,4 mm aperture
  • NF EN ISO/ASTM 52931:2023 Fabrication additive de métaux - Environnement, santé et sécurité - Principes généraux pour l'utilisation de matériaux métalliques
  • NF A81-055:2005 Welding consumables - General product standard for filler metals and fluxes for fusion welding of metallic materials.
  • NF ISO 30011:2010 Air des lieux de travail - Détermination des métaux et métalloïdes dans les particules en suspension dans l'air par spectrométrie de masse avec plasma à couplage inductif
  • NF P78-453:1986 Glazing and mirrors. Insulating glazing. Determination method of greasy deposits on metal spacers.

American Society for Testing and Materials (ASTM), metal release agent

  • ASTM F1071-94(2006) Standard Specification for Expanded-Metal Bulkhead Panels
  • ASTM F1071-94(1999) Standard Specification for Expanded-Metal Bulkhead Panels
  • ASTM F1071-94(2018) Standard Specification for Expanded-Metal Bulkhead Panels
  • ASTM F1071-94(2023) Standard Specification for Expanded-Metal Bulkhead Panels
  • ASTM B1021-21 Standard Test Method for Peel Resistance of Metal Sheets Joined by High Strength Bonds
  • ASTM D1780-05(2020) Standard Practice for Conducting Creep Tests of Metal-to-Metal Adhesives
  • ASTM D1062-08(2023) Standard Test Method for Cleavage Strength of Metal-to-Metal Adhesive Bonds
  • ASTM C592-08a Standard Specification for Mineral Fiber Blanket Insulation and Blanket-Type Pipe Insulation (Metal-Mesh Covered) (Industrial Type)
  • ASTM C592-10 Standard Specification for Mineral Fiber Blanket Insulation and Blanket-Type Pipe Insulation (Metal-Mesh Covered) (Industrial Type)
  • ASTM C592-12 Standard Specification for Mineral Fiber Blanket Insulation and Blanket-Type Pipe Insulation (Metal-Mesh Covered) (Industrial Type)
  • ASTM C592-13 Standard Specification for Mineral Fiber Blanket Insulation and Blanket-Type Pipe Insulation lpar;Metal-Mesh Coveredrpar; lpar;Industrial Typerpar;
  • ASTM E1916-97(2004) Standard Guide for Identification and/or Segregation of Mixed Lots of Metals
  • ASTM E1916-97 Standard Guide for Identification and/or Segregation of Mixed Lots of Metals
  • ASTM UOP873-86 Noble Metals and Modifiers in Catalysts by ICP-AES
  • ASTM D1748-02 Standard Test Method for Rust Protection by Metal Preservatives in the Humidity Cabinet
  • ASTM D1748-83(1993)e1 Standard Test Method for Rust Protection by Metal Preservatives in the Humidity Cabinet
  • ASTM D1748-00 Standard Test Method for Rust Protection by Metal Preservatives in the Humidity Cabinet
  • ASTM D1748-10 Standard Test Method for Rust Protection by Metal Preservatives in the Humidity Cabinet
  • ASTM C991-23 Standard Specification for Flexible Fibrous Glass Insulation for Metal Buildings
  • ASTM D1780-99 Standard Practice for Conducting Creep Tests of Metal-to-Metal Adhesives
  • ASTM B533-85(1998) Standard Test Method for Peel Strength of Metal Electroplated Plastics
  • ASTM B533-85(2004) Standard Test Method for Peel Strength of Metal Electroplated Plastics
  • ASTM B533-85(2019) Standard Test Method for Peel Strength of Metal Electroplated Plastics
  • ASTM C592-00 Standard Specification for Mineral Fiber Blanket Insulation and Blanket-Type Pipe Insulation (Metal-Mesh Covered) (Industrial Type)
  • ASTM C592-97 Standard Specification for Mineral Fiber Blanket Insulation and Blanket-Type Pipe Insulation (Metal-Mesh Covered) (Industrial Type)
  • ASTM C592-04 Standard Specification for Mineral Fiber Blanket Insulation and Blanket-Type Pipe Insulation (Metal-Mesh Covered) (Industrial Type)
  • ASTM C592-80 Standard Specification for Mineral Fiber Blanket Insulation and Blanket-Type Pipe Insulation )Metal-Mesh Covered) (Industrial Type)
  • ASTM C592-08 Standard Specification for Mineral Fiber Blanket Insulation and Blanket-Type Pipe Insulation (Metal-Mesh Covered) (Industrial Type)
  • ASTM D6412/D6412M-99 Standard Specification for Epoxy (Flexible) Adhesive for Bonding Metallic and Nonmetallic Materials
  • ASTM D6412/D6412M-99(2005) Standard Specification for Epoxy (Flexible) Adhesive for Bonding Metallic and Nonmetallic Materials
  • ASTM D6412/D6412M-99(2012) Standard Specification For Epoxy (Flexible) Adhesive For Bonding Metallic And Nonmetallic Materials
  • ASTM D6412/D6412M-99(2020) Standard Specification for Epoxy (Flexible) Adhesive For Bonding Metallic And Nonmetallic Materials
  • ASTM D3166-99(2012) Standard Test Method for Fatigue Properties of Adhesives in Shear by Tension Loading (Metal/Metal)
  • ASTM D3166-99(2020) Standard Test Method for Fatigue Properties of Adhesives in Shear by Tension Loading (Metal/Metal)
  • ASTM D2293-96(2016) Standard Test Method for Creep Properties of Adhesives in Shear by Compression Loading (Metal-to-Metal)
  • ASTM A942-95(2001) Standard Specification for Centrifugally Cast White Iron/Gray Iron Dual Metal Abrasion- Resistant Roll Shells
  • ASTM A942/A942M-95(2022) Standard Specification for Centrifugally Cast White Iron/Gray Iron Dual Metal Abrasion-Resistant Roll Shells
  • ASTM F601-98 Standard Practice for Fluorescent Penetrant Inspection of Metallic Surgical Implants
  • ASTM D2295-96(2002) Standard Test Method for Strength Properties of Adhesives in Shear by Tension Loading at Elevated Temperatures (Metal-to-Metal)
  • ASTM D2295-96(2008) Standard Test Method for Strength Properties of Adhesives in Shear by Tension Loading at Elevated Temperatures (Metal-to-Metal)
  • ASTM C383-97 Standard Test Method for Wet Adhesion of Thermal Insulating Cements to Metal (Withdrawn 2002)

US-VA, metal release agent

Danish Standards Foundation, metal release agent

  • DS/EN 2243-2:2005 Aerospace series - Non-metallic materials - Structural adhesives - Test method - Part 2: Peel metal-metal
  • DS/EN 2243-2:1991 Aerospace series. Structural adhesives. Test methods. Part 2: Peel metal-metal
  • DS/EN 2243-3:2005 Aerospace series - Non-metallic materials - Structural adhesives - Test method - Part 3: Peeling test metal-honeycomb core
  • DS/EN 13397:2002 Industrial valves - Diaphragm valves made of metallic materials
  • DS/ISO 13971:2012 Refrigeration systems and heat pumps - Flexible pipe elements, vibration isolators, expansion joints and non-metallic tubes - Requirements and classification
  • DS/EN 1736:2011 Refrigerating systems and heat pumps - Flexible pipe elements, vibration isolators, expansion joints and non-metallic tubes - Requirements, design and installation
  • DS/EN 2243-3:1993 Aerospace series. Structural adhesives. Test methods. Part 3: Peeling test metal-honeycomb core
  • DS/EN 13479:2005 Welding consumables - General product standard for filler metals and fluxes for fusion welding of metallic materials
  • DS/EN 14024:2005 Metal profiles with thermal barrier - Mechanical performance - Requirements, proof and tests for assessment

Lithuanian Standards Office , metal release agent

  • LST EN 2243-2-2005 Aerospace series - Non-metallic materials - Structural adhesives - Test method - Part 2: Peel metal-metal
  • LST EN 2243-3-2005 Aerospace series - Non-metallic materials - Structural adhesives - Test method - Part 3: Peeling test metal-honeycomb core
  • LST EN 13397-2002 Industrial valves - Diaphragm valves made of metallic materials
  • LST EN 1736-2009 Refrigerating systems and heat pumps - Flexible pipe elements, vibration isolators, expansion joints and non-metallic tubes - Requirements, design and installation
  • LST EN 14509-2014 Self-supporting double skin metal faced insulating panels - Factory made products - Specifications
  • LST EN 13479-2005 Welding consumables - General product standard for filler metals and fluxes for fusion welding of metallic materials
  • LST EN 14024-2005 Metal profiles with thermal barrier - Mechanical performance - Requirements, proof and tests for assessment

AENOR, metal release agent

  • UNE-EN 2243-2:2006 Aerospace series - Non-metallic materials - Structural adhesives - Test method - Part 2: Peel metal-metal
  • UNE-EN 2243-3:2006 Aerospace series - Non-metallic materials - Structural adhesives - Test method - Part 3: Peeling test metal-honeycomb core
  • UNE-EN 13397:2002 INDUSTRIAL VALVES - DIAPHRAGM VALVES MADE OF METALLIC MATERIALS.
  • UNE-EN 1736:2009 Refrigerating systems and heat pumps - Flexible pipe elements, vibration isolators, expansion joints and non-metallic tubes - Requirements, design and installation
  • UNE-EN 13479:2005 Welding consumables - General product standard for filler metals and fluxes for fusion welding of metallic materials
  • UNE 84066:1987 COSMETIC RAW MATERIALS. SEPARATION OF FATTY ACIDS FROM METAL STEARATES
  • UNE 125300-1:1994 LIGHT GAUGE METAL CONTAINERS. ROUND METAL CONTAINERS FOR PAINTS, VARNISHES AND DILUENTS. DIMENSIONAL CHARACTERISTICS.

German Institute for Standardization, metal release agent

  • DIN EN 2243-2:2006-10 Aerospace series - Non-metallic materials - Structural adhesives - Test method - Part 2: Peel metal-metal; German and English version EN 2243-2:2005
  • DIN EN 2243-2:2006 Aerospace series - Non-metallic materials - Structural adhesives - Test method - Part 2: Peel metal-metal; German and English version EN 2243-2:2005
  • DIN 18183:1988 Prefabricated gypsum plasterboard; metal stud partitions
  • DIN EN 2243-3:2006-10 Aerospace series - Non-metallic materials - Structural adhesives - Test method - Part 3: Peeling test metal-honeycomb core; German and English version EN 2243-3:2005
  • DIN EN 13397:2002-03 Industrial valves - Diaphragm valves made of metallic materials; German version EN 13397:2001
  • DIN EN 2243-3:2006 Aerospace series - Non-metallic materials - Structural adhesives - Test method - Part 3: Peeling test metal-honeycomb core; German and English version EN 2243-3:2005
  • DIN 54455:2016 Testing of adhesives for metals and of bonded metal joints - Torsional shear test
  • DIN 54455:1984 Testing of adhesives for metals and of bonded metal joints; torsional shear test
  • DIN 51367:1991 Testing of metal working fluids; determination of the stability of emulsified metal working fluids in hard water
  • DIN 54455:2016-09 Testing of adhesives for metals and of bonded metal joints - Torsional shear test
  • DIN 51521:1999 Lubricants - Metal working fluids - Water mix metal working fluids SE; specifications
  • DIN 54452:1981 Testing of adhesives for metals and adhesively bonded metal joints; compression shear test
  • DIN EN 14509:2007 Self-supporting double skin metal faced insulating panels - Factory made products - Specifications; English version of DIN EN 14509:2007-02
  • DIN 53287:2006 Testing of adhesives for metals and adhesively bonded metal joints - Determination of the resistance to liquids
  • DIN 53287:2018-07 Testing of adhesives for metals and adhesively bonded metal joints - Determination of the resistance to liquids
  • DIN EN 13920-8:2003 Aluminium and aluminium alloys - Scrap - Part 8: Scrap consisting of non-ferrous materials from shredding processes destined to aluminium separation processes; German version EN 13920-8:2003
  • DIN EN 13479:2017-10 Welding consumables - General product standard for filler metals and fluxes for fusion welding of metallic materials; German version EN 13479:2017
  • DIN 51385:1991 Lubricants; metal working fluids; terms
  • DIN 51368:1990-11 Determination of fraction separated by hydrochloric acid from water mix metal working fluids
  • DIN EN 13479:2017 Welding consumables - General product standard for filler metals and fluxes for fusion welding of metallic materials
  • DIN EN 13397:2002 Industrial valves - Diaphragm valves made of metallic materials; German version EN 13397:2001
  • DIN EN 15006:2006 Metal aerosol containers - Aluminium containers - Dimensions of the 25,4 mm aperture; English version of DIN EN 15006:2006-12
  • DIN EN 13479:2005 Welding consumables - General product standard for filler metals and fluxes for fusion welding of metallic materials; German version EN 13479:2004
  • DIN 50928:1985 Corrosion of metals; testing and assessment of the corrosion protection of coated metallic materials in contact with aqueous corrosive agents

TR-TSE, metal release agent

  • TS 925-1971 FRICTION L?NINGS FOR CLUTCHES (METALLIC, SEMIMETALLIC AND METAL -CERAMIC)
  • TS 3606-1981 DETERMINATION OF HEAVY METAL IONS IN FRUIT AND VEGETABLE PRODUCTS

SE-SIS, metal release agent

HU-MSZT, metal release agent

GM North America, metal release agent

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, metal release agent

  • PREN 2243-2-2001 Aerospace Series Non-Metallic Materials Structural Adhesives Test Method Part 2: Peel Metal-Metal (Edition P 1)
  • PREN 2243-3-2001 Aerospace Series Non-Metallic Materials Structural Adhesives Test Method Part 3: Peeling Test Metal-Honeycomb Core (Edition P 1)

工业和信息化部, metal release agent

  • YB/T 4718-2019 High temperature annealing isolating agent for oriented electrical steel
  • HG/T 5763-2020 Determination of metal elements in metallocene polyolefin catalysts by inductively coupled plasma optical emission spectrometry
  • HG/T 5169-2017 Technical specifications for treating heavy metal wastewater using ion exchange technology
  • HG/T 5765-2020 Determination of metal elements in catalytic cracking catalysts

Professional Standard - Electron, metal release agent

  • SJ/T 10179-1991 Generic specification for metal vibration isolators
  • SJ 2608-1985 Metal friction-trunk shock and vibration isolators
  • SJ/T 10180-1991 Generic specification for metal-rubber vibration isolators
  • SJ 20593-1996 General specification for all metal wire-cable vibration isolator

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, metal release agent

  • GB/T 12239-2008 Industrial valves.Diaphragm valves made of metallic materials
  • GB/T 13353-1992 Test method for resistance of adhesive bonds to chemical reagents—Metal to metal
  • GB/T 4702.7-2016 Chromium metal.Determination of nitrogen content.Distillation-nessler reagent spectrophotometric method
  • GB/T 7749-1987 Test method of cleavage strength of adhesive (metal to metal)
  • GB 7749-1987 Test Method for Splitting Strength of Adhesives (Metal to Metal)
  • GB/T 7124-1986 The method for determination of strength properties of adhesive in shear by tension loading(Metal to metal)
  • GB/T 15254-2014 Rubber, vulcanized.Determination of adhesion to metal.180° peel test method
  • GB/T 15254-1994 Rubber, vulcanized--Determination of adhesion to metal-180°Peel test method
  • GB/T 7750-1987 The method of creep properties of adhesive in shear by tension loading (metal to metal)
  • GB 7750-1987 Test Method for Tensile Shear Creep Properties of Adhesives (Metal to Metal)
  • GB/T 38498-2020 Evaluation method for determining metal corrosion of disinfectant
  • GB/T 9735-1988 Chemical reagent--General method for the determination of heavy metals
  • GB/T 5009.74-2003 Method for limit test of heavy metals in food additives
  • GB/T 25495-2010 Test methods for metal releasing characteristics of getters
  • GB/T 9735-2008 Chemical reagent.General method for the determination of heavy metals
  • GB/T 10267.1-1988 Method for analysis of calcium metal--The determination of chlorine content by chloride--Selective electrode
  • GB 10267.1-1988 Analytical method for calcium metal Determination of chlorine by chloride ion selective electrode method
  • GB/T 17721-1999 Metallic coatings--Porosity tests--Ferroxyl test
  • GB/T 23996-2009 Solvent metal panel coatings for indoor decorating and refurbishing

Professional Standard - Aviation, metal release agent

  • HB 6131-1987 Metal Friction Damping Vibration Isolator
  • HB 6132-1987 Technical conditions of metal friction damping vibration isolator
  • HB 6686-1992 Test Method for Tensile Shear Creep Properties of Adhesives (Metal to Metal)
  • HB 6685-1992 Test Method for Compression Shear Creep Properties of Adhesives (Metal to Metal)
  • HB 5398-1988 Specification for structural adhesives for metal bonding
  • HB 5399-1988 Specification for adhesives for metal honeycomb sandwich structures

International Organization for Standardization (ISO), metal release agent

  • ISO 17853:2011 Wear of implant materials - Polymer and metal wear particles - Isolation and characterization
  • ISO/TR 7655:2022 Corrosion of metals and alloys — Overview of metal corrosion protection when using disinfectants
  • ISO 4588:1995 Adhesives - Guidelines for the surface preparation of metals
  • ISO 4588:1989 Adhesives; preparation of metal surfaces for adhesive bonding
  • ISO 10309:1994 Metallic coatings - Porosity tests - Ferroxyl test

BE-NBN, metal release agent

European Committee for Standardization (CEN), metal release agent

  • EN 2243-2:1991 Aerospace series; structural adhesives; test methods; part 2: peel metal-metal
  • EN 2243-2:2005 Aerospace series - Non-metallic materials - Structural adhesives - Test method - Part 2: Peel metal-metal
  • EN 2243-3:2005 Aerospace series - Non-metallic materials - Structural adhesives - Test method - Part 3: Peeling test metal-honeycomb core
  • EN 13397:2001 Industrial valves - Diaphragm valves made of metallic materials
  • EN 24505:1993 Hardmetals - Metallographic Determination of Porosity and Uncombined Carbon
  • EN 15006:2006 Metal aerosol containers - Aluminium containers - Dimensions of the 25,4 mm aperture
  • EN 13479:2004 Welding consumables - General product standard for filler metals and fluxes for fusion welding of metallic materials
  • EN 13479:2017 Welding consumables - General product standard for filler metals and fluxes for fusion welding of metallic materials
  • EN 14509:2013 Self-supporting double skin metal faced insulating panels - Factory made products - Specifications
  • prEN 14024-2021 Metal profiles with thermal barrier - Mechanical performance - Requirements, proof and tests for assessment
  • FprEN 14024 Metal profiles with thermal barrier - Mechanical performance - Requirements, proof and tests for assessment

European Association of Aerospace Industries, metal release agent

  • AECMA PREN 2243-2-2001 Aerospace Series Non-Metallic Materials Structural Adhesives Test Method Part 2: Peel Metal-Metal Edition P 1
  • AECMA PREN 2243-3-2001 Aerospace Series Non-Metallic Materials Structural Adhesives Test Method Part 3: Peeling Test Metal-Honeycomb Core Edition P 1
  • AECMA PREN 3848-1994 Aerospace Series Semi-Finished Metallic Products Method of Measuring for from Deviations Edition P1
  • AECMA PREN 3848-1996 Aerospace Series Semi-Finished Metallic Products Methods of Measuring from Deviations Edition P2

British Standards Institution (BSI), metal release agent

  • BS EN 2243-2:2005 Aerospace series - Non-metallic materials - Structural adhesives - Test method - Peel metal-metal
  • BS EN 13397:2002 Industrial valves - Diaphragm valves made of metallic materials
  • BS EN 2243-3:2005 Aerospace series - Non-metallic materials - Structural adhesives - Test method - Peeling test metal-honeycomb core
  • BS 3958-3:1985 Thermal insulating materials - Metal mesh faced man-made mineral fibre mattresses
  • BS EN 14509:2013 Self-supporting double skin metal faced insulating panels. Factory made products. Specifications
  • BS EN 14509:2007 Self-supporting double skin metal faced insulating panels - Factory made products - Specifications
  • BS ISO 15202-1:2012 Workplace air. Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry. Sampling
  • BS EN 13479:2004 Welding consumables - General product standard for filler metals and fluxes for fusion welding of metallic materials
  • BS EN 13479:2005 Welding consumables - General product standard for filler metals and fluxes for fusion welding of metallic materials
  • BS ISO 30011:2010 Workplace air. Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma mass spectrometry
  • BS EN 13523-17:2004 Coil coated metals - Test methods - Adhesion of strippable films
  • BS EN 13523-17:2011 Coil coated metals. Test methods. Adhesion of strippable films
  • BS EN 13523-17:2019 Coil coated metals. Test methods. Adhesion of strippable films
  • BS EN 15006:2007 Metal aerosol containers - Aluminium containers - Dimensions of the 25,4 mm aperture
  • BS ISO 5156:2022 Corrosion of metals and alloys. Corrosion test method for disinfectant. Total immersion method
  • BS EN 13479:2017 Tracked Changes. Welding consumables. General product standard for filler metals and fluxes for fusion welding of metallic materials
  • BS EN 14509:2006 Self-supporting double skin metal faced insulating panels - Factory made products - Specifications

RU-GOST R, metal release agent

  • GOST 33070-2014 Medical gloves. Method for determination of residual powdering agent
  • GOST 17319-1976 Reagents. Methods for the determination of heavy metals
  • GOST 21981-1976 Sealants. Determination method of bond strength with metal at peeling
  • GOST R EN 13479-2010 Welding consumables. General product standard for filler metals and fluxes for fusion welding of metallic materials
  • GOST R ISO 30011-2017 Workplace air. Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma mass spectrometry

Aerospace, Security and Defence Industries Association of Europe (ASD), metal release agent

  • ASD-STAN PREN 2243-2-2001 Aerospace Series Non-Metallic Materials Structural Adhesives Test Method Part 2: Peel Metal-Metal (Edition P 1)
  • ASD-STAN PREN 2243-3-2001 Aerospace Series Non-Metallic Materials Structural Adhesives Test Method Part 3: Peeling Test Metal-Honeycomb Core (Edition P 1)

Taiwan Provincial Standard of the People's Republic of China, metal release agent

Professional Standard - Chemical Industry, metal release agent

  • HG/T 2951-2001 Metal anode cells used diaphragm method
  • HG/T 2951-2012 Metal anode cells used diaphragm method
  • HG/T 4341-2012 Heat reflecting insulation coatings for metal surfaces
  • HG/T 3942-2007 Sodium hydroxide for industrial use.Determination of metal and nonmetal ions content.ICP method
  • HG/T 4592-2014 Electrode active coating of dimensionally stable anode electrolyzer use membrane method
  • HG/T 3944-2007 Poly (vinyl chloride) resin.Determination of metal ions content.ICP method

CZ-CSN, metal release agent

Canadian General Standards Board （CGSB), metal release agent

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, metal release agent

BELST, metal release agent

  • STB 2281-2012 Fire partitions from metal shape. Specifications
  • STB 1809-2007 Roof two - layer metal - faced panels for buildings with polyurethane foam thermal insulation. Specifications

General Motors do Brasil, metal release agent

  • GMSA EMS 9309663-2011 Metal - metal adhesive - medium resistance - high tixotropy - medium expansion Adesivo metal-metal - m閐ia resist阯cia - alta tixotropia - m閐ia expans鉶 Do Not use on New Programs; No Replacement
  • GMSA EMS 9309864-2011 Metal / Metal Adhesive - Medium Cure ? Medium Expansion Adesivo Metal / Metal - M茅dia Cura - M茅dia Expans茫o Revision A; Do Not use on New Programs; No Replacement

Defense Logistics Agency, metal release agent

海关总署, metal release agent

  • SN/T 5476-2022 Specifications for the Construction of Designated Isolation and Quarantine Sites for Entering Equine Animals

Professional Standard - Petrochemical Industry, metal release agent

Aerospace Industries Association/ANSI Aerospace Standards, metal release agent

IT-UNI, metal release agent

IPC - Association Connecting Electronics Industries, metal release agent

Professional Standard - Nuclear Industry, metal release agent

Association of German Mechanical Engineers, metal release agent

(U.S.) Ford Automotive Standards, metal release agent

Professional Standard - Machinery, metal release agent

Society of Automotive Engineers (SAE), metal release agent

ZA-SANS, metal release agent

FI-SFS, metal release agent

GB-REG, metal release agent

  • REG NASA-LLIS-0485-1996 Lessons Learned - Isolate the Propulsion Pressurization System from the Propellant Tanks (1993)

AT-ON, metal release agent

  • ONORM EN 2243-3-1992 Aerospace series - Structural adh?sives - Test methods -Peeling test metal-honeycomb core
  • ONORM EN 2243 Teil.2-1991 Aerospace series - Structural adhesives -Test methods - Part 2: Peel metal-metal
  • OENORM EN 14024-2021 Metal profiles with thermal barrier - Mechanical performance - Requirements, proof and tests for assessment

TH-TISI, metal release agent

IN-BIS, metal release agent

Professional Standard - Light Industry, metal release agent

RO-ASRO, metal release agent

  • STAS 10284-1975 METAL POWDERS COPPER POWDERS Determination of sulphate ion
  • STAS 8264/1-1983 HARD METALS Metallographie determination of porosity and uneombined carbon
  • STAS 11587-1983 Metal welding FLUX CORED WIRES FOR WELDING AND SURFACING
  • STAS 10564/2-1981 PLASMA GUTTING OF METALLS Grades of quality
  • STAS 11281/2-1979 Mct&ls tests DETERMINATION OF WELDING METALS COMPATIBILITY WITH THE BASIC METAL FOR CAST WELDING Flux shielded arc welding
  • STAS 7335/9-1988 Corrosion protection of underground metallic constructions OUTER CATHODIG PROTECTION AND EARTHING BY METALLIC ACTIVE ANO0ES General specifications
  • STAS 6679/20-1986 Metal cutting machine-tools CHECKING METHODS FOR DEVIATION FROM INTERSECTION OF AXES

Institute of Interconnecting and Packaging Electronic Circuits (IPC), metal release agent

NO-SN, metal release agent

  • NS 3034-1987 Thermal insulation - Sheet metal construction with thermal bridges - Calculation of thermal resistance

General Motors Corporation (GM), metal release agent

GOSTR, metal release agent

  • GOST 17319-2019 Reagents. Methods for determination of heavy metals
  • GOST R 58418-2019 Additive technologies. Metal powders and wires. Types of defects. Classification, terms and definitions
  • GOST R 59037-2020 Additive technologies. Designing metal parts. Guidelines processes

Anhui Provincial Standard of the People's Republic of China, metal release agent

YU-JUS, metal release agent

  • JUS B.E8.132-1991 Insulating glass units. Determination of the loading of desiccant in interspace between glass plates. Weighting method

Institute of Electrical and Electronics Engineers (IEEE), metal release agent

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., metal release agent

  • ASHRAE PH-97-5-2-1997 Thermal Breaking Systems for Metal Stud Walls - Can Metal Stud Walls Perform as Well as Wood Stud Walls?

IL-SII, metal release agent

  • S.I.742-1969 METAL CONTAINERS FOR AEROSOL DISPENSERS: SAFETY REQUIREMENTS

Shaanxi Provincial Standard of the People's Republic of China, metal release agent

  • DB6101/T 3121-2022 Guidelines for the protection of metals from corrosion by disinfectants

Professional Standard - Textile, metal release agent

  • FZ/T 60011-1993 Determination of Peeling Strength of Metal Coated Composite Flocs

Jiangsu Provincial Standard of the People's Republic of China, metal release agent

  • DB32/T 3251-2017 Non-metallic barrier explosion-proof safety technical requirements for storage tanks and tank trucks

AIA/NAS - Aerospace Industries Association of America Inc., metal release agent

  • NA0175-0177-2012 SPACER@ SLEEVE@ NON METALLIC@ SCREW AND BOLT@ METRIC (Rev 1)
  • NAS61-2010 SPACER@ SLEEVE@ NONMETALLIC@ POLYAMIDE (NYLON)@ SCREW AND BOLT (Rev 2)
  • NAS61-2014 SPACER@ SLEEVE@ NONMETALLIC@ POLYAMIDE (NYLON)@ SCREW AND BOLT (Rev 3)

SAE - SAE International, metal release agent

  • SAE J1523-2021 Metal to Metal Overlap Shear Strength Test for Automotive Type Adhesives
  • SAE J1523-1985 Metal to Metal Overlap Shear Strength Test for Automotive Type Adhesives@ Recommended Practice
  • SAE AMS1525C-1992 Cleaner for Aircraft Exterior Metallic Surfaces Wipe Solvent@ Cold Operations
  • SAE J1851-2021 Induction Cure Test for Metal Bonding Adhesives@ Recommended Practice

GM Holden Ltd, metal release agent

  • HOLDEN HN 2079-2013 Adhesive - Metal to Metal - Non Flammable Do Not Use on New Programs, No Replacement

Standard Association of Australia （SAA）, metal release agent

  • AS 4298:1995 Gas-insulated metal-enclosed switchgear for rated voltages 72.5 KV and above -Requirements for switching of bus-charging currents by disconnectors

GM Daewoo, metal release agent

CO-ICONTEC, metal release agent

CH-SNV, metal release agent

Professional Standard - Ferrous Metallurgy, metal release agent

  • YB/T 4179-2008 Water-cooled metal mold centrifugal casting ductile iron pipe mold

农业农村部, metal release agent

  • NY/T 1860.38-2016 Test Guidelines for Determination of Physicochemical Properties of Pesticides Part 38: Stability to metals and metal ions

Canadian Standards Association (CSA), metal release agent

  • CSA Z264.1-02-2002 Tubes espaceurs et chambres d抜nhalation pour les a閞osols-doseurs Mise a Jour No 1-2

ES-UNE, metal release agent

  • UNE-EN 13479:2018 Welding consumables - General product standard for filler metals and fluxes for fusion welding of metallic materials
  • UNE 211238-1-3:2021 IN:2021 Electrical test application guide for the metallic element of separable connectors

U.S. Military Regulations and Norms, metal release agent

Professional Standard - Agriculture, metal release agent

  • GB 9735-1988 General method for the determination of heavy metals in chemical reagents
  • GB/T 8451-1987 Test method for the limit of heavy metals in food additives

GM Europe, metal release agent

国家能源局, metal release agent

  • NB/SH/T 0982-2019 Turbidity determination method for lubricating oil metal detergents

National Association of Corrosion Engineers (NACE), metal release agent

  • NACE 10A392-2006 Effectiveness of Cathodic Protection on Thermally Insulated Underground Metallic Structures (Item No. 24156)

Professional Standard - Energy, metal release agent

  • NB/T 42059-2015 Disconnectors of metal-oxide surge arresters for a.c. systems

AR-IRAM, metal release agent

ES-AENOR, metal release agent

CENELEC - European Committee for Electrotechnical Standardization, metal release agent

  • EN 61259:1994 Gas-Insulated Metal-Enclosed Switchgear for Rated Voltages 72@5 kV and Above - Requirements for Switching of Bus-Charging Currents by Disconnectors

NL-NEN, metal release agent

European Committee for Electrotechnical Standardization（CENELEC）, metal release agent

  • EN 50089:1992 Cast Resin Partitions for Metal Enclosed Gas-Filled High Voltage Switchgear and Controlgear

未注明发布机构, metal release agent

  • BS EN 14024:2023 Metal profiles with thermal barrier — Mechanical performance — Requirements, proof and tests for assessment

国家市场监督管理总局、中国国家标准化管理委员会, metal release agent

  • GB/T 38108-2019 Test method for derterming chlorine capacity of alkaline earth metal-based sorbents at high temperature
  • GB/T 39289-2020 Determination of the adhesion strength—Plastic and metal

National Fire Protection Association (NFPA), metal release agent

  Release agent analysis, capsule release agent, Release agent analysis, Analytical technology of release agent, capsule release agent, Analytical technology of release agent, metal repair agent, release agent technology, paper release agent, paper release agent, The main component of the release agent, metal surface agent, metal stretching agent, metal protectant, Release agent, powder release agent, Isolation Powder Isolation Agent, metal carbide, metal release agent, Rubber release agent.

 



Copyright ©2007-2023 ANTPEDIA, All Rights Reserved