ZH
RU
ES

metal carbide

metal carbide, Total:500 items.

In the international standard classification, metal carbide involves: Surface treatment and coating, Analytical chemistry, Adhesives, Testing of metals, Materials for the reinforcement of composites, Products of the chemical industry, Chipless working equipment, Ferroalloys, Printed circuits and boards, Powder metallurgy, Horology, Materials for aerospace construction, Iron and steel products, Protection against fire, Valves, Road vehicle systems, Aerosol containers, Environmental protection, Electronic tubes, Inorganic chemicals, Pesticides and other agrochemicals, Non-metalliferous minerals, Vocabularies, Cutting tools, Semiconducting materials, Products of non-ferrous metals, Machine tool systems, Coatings and related processes used in aerospace industry, Non-ferrous metals, Air quality, Standardization. General rules, Construction industry, Refractories, Internal combustion engines, Refrigerating technology, Cans. Tins. Tubes, Construction materials, Bottles. Pots. Jars, Occupational safety. Industrial hygiene, Aircraft and space vehicles in general, Spices and condiments. Food additives, Road engineering, Lamps and related equipment, Paint ingredients, Ferrous metals, Semiconductor devices, Welding, brazing and soldering, Capacitors, Conducting materials, Optics and optical measurements, Petroleum products in general, Corrosion of metals, Leather technology, Nuclear energy engineering.

SE-SIS, metal carbide

SIS SS 06 40 25-1985 Metal arc welding with covered electrodes of carbon, carbon manganese and microalloyed steels
SIS SS 06 13 01-1990 Consumables — Wire electrodes and fluxes for submerged-arc welding of carbon steels, carbon-manganese steels, microalloyed steel and low-alloyed steels — Weld metal test specimens for all-weld-metal tests
SIS SS 06 10 01-1979 Welding electrodes — Covered electrodes for manual metal-arc welding and gravity welding of carbon steels, carbon-manganese steels, fine grained steels with increased yield stress and low- alloyed steels — Weld metal test pieces
SIS MNC 990-1990 Welding electrodes — Tubular wires for gas metal are welding and metal are welding of carbon steels, carbon-manganese steels and microalloyed steels — Summary
SIS SS CECC 30500-1987 Sectional specification: Fixed matallizedpolycarbonate film dielectric capacitors for direct current
SIS SS 06 11 01-1990 Welding electrodes — Wire electrodes and tubular wires for gas metal arc welding and metal arc welding of carbon steel, carbon-manganese alloyed steel, microalloyed steel and low-alloyed steel — Weld metal test specimens for all-weld-metal tests
SIS MNC 983-1990 Consumables — Wire electrodes and fluxes for submerged-arc welding of carbon steels, carbon-manganese steels and microalloyed steels — Summary
SIS SS 06 10 02-1979 Welding electrodes — Covered electrodes for manual metal-arc welding and gravity welding of carbon steels, carbon-manganese steels, fine grained steels with increased yield stress and low-alloyed steels — Welds and test pieces for testing of butt welds
SIS SS 06 01 41-1990 Welding electrodes — Tubular wires for gas metal arc welding and metal arc welding of carbon steels, carbon-manganese steels and microalloyed steels — Technical requirements for inspection and deliver/
SIS SS 06 13 02-1990 Consumables — Wire electrodes and fluxes for submerged-arc welding of carbon steels, carbon-manganese steels, microalloyed steels and low-alloyed steels — Welds and weld meta I test specimens forbutt weld tests
SIS SS CECC 30501-1991 Blank detail specification: Fixed metallized polycarbonate film dielectric capacitors for direct current
SIS SS 06 11 02-1990 Welding electrodes — Wire electrodes and tubular wires for gas metal arc welding and metal arc welding of carbon steel, carbon-manganese alloyedsteel, microalloyed steel and low-alloyed steel — Welds and v/eld meta! bars for butt weld tests

RO-ASRO, metal carbide

STAS 10123/1-1984 Metal Welding CLASSIFICATION AND SYMBOLI- ZATION OF FLUXES FOR WELDING OF CARBON AND LOW ALLOYED STEELS
STAS 4605/16-1980 NON METAL-BEARING MINING PRODUCTS "WITH CARBONATE CONTENT Detennination of carbon dioxide
STAS 4605/7-1972 NON-METAL BEAR IN G MINING PRODUCTS WITH CARBONATE CONTENT Determinalion of titanium dioxide
STAS 7603-1966 Traction drawing die. Round metal wire made of synthetic metal carbide. size/dimensions
STAS 4605/10-1980 NON METAL-BEARING MINING PRODUCTS WITH CARBONATE CONTENT Determination of magnesium oxide
SR ISO 4498-2:1996 Sintered metal materials, excluding hardmetals. Determination of apparent hardness. Part 2: Case-hardened ferrous materials, surface enriched by carbon or carbon and nitrogen
STAS 12760-1989 SINTERED METALLIC CARBIDE BURRS Shapes and main dimensions
STAS 4605/14-1972 NON-METAL BEARING MIXIXG PRODUCTS WITH CARBONATF CONTENT Determination of phosphorus penloxide
STAS 4605/5-1972 NON-METAL BEARING MINING PRODUCTS WITH CARBONATE CONTENT Determination of iron triox'de
STAS 4605/8-1972 NON-METAL BEARING .MINING PRODUCTS WITH CARBONATE CONTENT Determinaticm of mnnganese oxide
STAS 4605/9-1988 NON-METAL BEARING MINING PRODUCTS WITH CARBONATES CONTENT Calcium oxide content determinationc
STAS 10123/2-1984 Metal welding CLASSIFICATION AND SYMBOLI- SATION OF COUPLES WIRE-FLUX FOR WELDING OF CARBON AND LOW ALLOYED STEELS
STAS 4605/4-1972 NON-.METAI. BEAHING MINING PRODUCTS WITH CARHONATH CONTENT noterminatioii of silica
STAS 7934-1967 Small thin plates of synthetic metal carbides. Inspection and test methods
STAS 4605/11-1972 NON-METAL BEARING MINING PRODI'CTS "WITH CARBONATE CONTENT Determinat ion of sodiuni and potassium oxide
STAS 7186-1965 A planing knife with a metal carbide back. Roughing knife. size/dimensions
STAS 12747-1989 BORE COUNTERSINKS AND CHANGEABLE tl?S OF SINTE- RED METALLIC CARBIDES Main dimensions
STAS 7604-1966 Traction drawing die. Synthetic Metal Carbide Core Rod Sizes/Dimensions
STAS 7187-1965 A planing knife with a metal carbide back. Final machining knife size/dimensions
STAS 4605/6-1988 NON-METAL BEARING MINING PRODUCTS WITH CARBONATES CONTENT Aluminium trioxide determination
STAS 8260-1982 Metallic coatings ETERMINATION OF TIN THICKNESS COATING BY CHEMICAL SOLVATION METHOD
STAS 8264/1-1983 HARD METALS Metallographie determination of porosity and uneombined carbon
STAS 6373/4-1990 Sintered carbide tips. Brazed carbide tips for cutting tools. General technical requirements for quality
STAS 10907-1977 NON-METALLIFEROUS MINING PRODUCTS WITH CARBONATES CONTENT Sampling
STAS 10953-1985 Metals welding SAMPLING FOR THK DETER MINATION OF CHEMICAL COMPOSITION OF DEPOSITED METAL
SR 5063/5-1993 Silicon carbide. Determination of pure silicon carbide content
STAS 4605/3-1980 NON METAL-BEARING MINING PRODUCTS WITH CARBONATE CONTENT Determinntion of loss ignition

BE-NBN, metal carbide

NBN 403-1968 Metal carbide sheets for turning tools
NBN 834-1970 Metal carbide moving piece. size
NBN-EN 24505-1993 Hardmetals. Metallographic determination of porosity and uncombined carbon (ISO 4505: 1978)
NBN-EN 23908-1993 Hardmetals. Determination of insoluble (free) carbon content. Gravimetric method (ISO 3908: 1985)
NBN 861-1971 Code for low alloy steels and filler metals for gas welding carbon steels

Korean Agency for Technology and Standards (KATS), metal carbide

KS D ISO 9717:2009 Phosphate conversion coatings for metals-Method of specifying requirements
KS D ISO 9717:2013 Phosphate conversion coatings for metals-Method of specifying requirements
KS M 8460-2012 Carbon disulfide
KS D 1780-1993 General rules for determination of carbon in metallic materials
KS D 1780-2016 General rules for determination of carbon in metallic materials
KS D 1780-2016(2021) General rules for determination of carbon in metallic materials
KS C 7607-2014 Metalhalide lamps
KS C 7607-2003 Metal halide lamps
KS C IEC 61167-2014(2019) Metal halide lamps
KS D ISO 7625:2021 Sintered metal materials, excluding hardmetals — Preparation of samples for chemical analysis for determination of carbon content
KS D ISO 7625:2016 Sintered metal materials, excluding hardmetals－Preparation of samples for chemical analysis for determination of carbon content
KS D 1780-2011 General rules for determination of carbon in metallic materials
KS D ISO 7625:2010 Sintered metal materials, excluding hardmetals-Preparation of samples for chemical analysis for determination of carbon content
KS D 7102-1989(2009) Submerged arc welding fluxes for carbon steel and low alloy steel
KS D ISO 4507-2004(2019) Sintered ferrous materials, carburized or carbonitrided -Determination and verification of case hardening depth by a micro hardness test

Association Francaise de Normalisation, metal carbide

NF A91-501:2013 Metallic and other inorganic coatings - Phosphate conversion coating of metals
NF ISO 1651:1995 Mandrins d'étirage de tubes, à noyau en métaux-durs (carbures métalliques) - Dimensions.
NF T25-112:2011 Carbon fibers - Chemical analysis - Determination of the metalloid elements.
NF T25-107:2011 Carbon fibers - Chemical analysis - Determination of metal impurities.
NF ISO 1684:1995 Filières d'étirage et de tréfilage à noyau en métaux-durs (carbures métalliques) - Spécification.
NF ISO 504:1995 Outils de tour à plaquettes en carbures métalliques - Désignation et marquage.
NF H44-042*NF EN 15006:2006 Metal aerosol containers - Aluminium containers - Dimensions of the 25,4 mm aperture
NF EN 16711-1:2015 Textiles - Détermination de la teneur en métaux - Partie 1 : dosage des métaux par minéralisation par micro-ondes
NF EN ISO 7625:2012 Matériaux métalliques frittés, à l'exclusion des métaux-durs - Préparation des échantillons pour analyse chimique en vue du dosage du carbone
NF A95-331*NF EN ISO 7625:2012 Sintered metal materials, excluding hardmetals - Preparation of samples for chemical analysis for determination of carbon content
NF L06-834:2007 Aerospace series - Metallic parts - Inducement compressive surface stresses - Tungsten carbide spherical beads
NF B49-421:1990 Refractory products. Chemical analysis of aluminous, siliceous, silicon carbide, carbon and metallic silicon refractory products.
NF H44-044:2006 Metal aerosol containers - Tinplate containers - Dimensions of to and three-piece cans.
NF H33-006:1989 Metal containers. Hermetically metal cans for carbonated drinks. Designation and dimensional characteristics.
NF ISO 242:2014 Plaquettes à braser en carbures métalliques pour outils de tour
NF ISO 883:2014 Plaquettes amovibles en métaux-durs (carbures métalliques) avec arrondi de pointe, sans trou de fixation - Dimensions
NF ISO 5468:2017 Forets pour bâtiment, à rotation et percussion, à plaquettes en métal-dur (carbures métalliques) - Dimensions
NF ISO 3364:2017 Plaquettes amovibles en métaux-durs (carbures métalliques) avec arrondi de pointe et trou de fixation cylindrique - Dimensions
NF EN ISO 3908:2009 Métaux-durs - Dosage du carbone insoluble (libre) - Méthode gravimétrique

International Organization for Standardization (ISO), metal carbide

ISO 9717:2010 Metallic and other inorganic coatings - Phosphate conversion coating of metals
ISO 9717:2017 Metallic and other inorganic coatings - Phosphate conversion coating of metals
ISO 4498-2:1981 Sintered metal materials, excluding hardmetals; Determination of apparent hardness; Part 2 : Case-hardened ferrous materials, surface enriched by carbon or carbon and nitrogen
ISO 7625:1983 Sintered metal materials, excluding hardmetals; Preparation of samples for chemical analysis for determination of carbon content
ISO 7625:2006 Sintered metal materials, excluding hardmetals - Preparation of samples for chemical analysis for determination of carbon content
ISO 7625:2012 Sintered metal materials, excluding hardmetals - Preparation of samples for chemical analysis for determination of carbon content
ISO 5923:1989 Fire protection; fire extinguishing media; carbon dioxide
ISO/TR 7655:2022 Corrosion of metals and alloys — Overview of metal corrosion protection when using disinfectants

Taiwan Provincial Standard of the People's Republic of China, metal carbide

CNS 8004-1981 Methods of Chemical Analysis for Carbon in Manganese Metal
CNS 8403-1982 Methods of Chemical Analysis for Chromium and Carbon in Chromium Metal
CNS 8284-1982 Method of Chemical Analysis for Carbon in Metallic Silicon (Electric Method)
CNS 8283-1982 Method of Chemical Analysis for Carbon in Metallic Silicon (Conductivity Method)
CNS 8282-1982 Method of Chemical Analysis for Carbon in Metallic Silicon (Neutralization Titration Method)
CNS 1621-1964 Calcium Carbonate, Precipitated (Low in Alkalies and Chloride)
CNS 2192-1963 Non-Ferrous Metal Polish
CNS 11070-1984 General Rules of Determination for Carbon in Metallic Materials
CNS 2552-1966 Detergent for metal pickling
CNS 2193-1963 Method of Test for Non-Ferrous Metal Polish
CNS 2913-1968 Method of Test for Unsulfonatable Hydorcarbons in Detergent Alkylate
CNS 13015-1992 Submerged Arc Welding Fluxes for Carbon Steel and Low Alloy Steel

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, metal carbide

GB/T 13353-1992 Test method for resistance of adhesive bonds to chemical reagents—Metal to metal
GB/T 688-1992 Chemical reagent--Carbon tetrachloride
GB/T 688-2011 Chemical reagent—Carbon tetrachloride
GB/T 9735-2008 Chemical reagent.General method for the determination of heavy metals
GB/T 654-1999 Chemical reagent-- Barium carbonate
GB/T 654-2011 Chemical reagent.Barium carbonate
GB 4396-2005 Fire extinguishing agent-carbon dioxide
GB/T 1397-1995 Chemical reagent. Potassium carbonate
GB/T 15897-1995 Chemical reagent. Calcium carbonate
GB/T 640-1997 Chemical reagent. Sodium hydrogen carbonate
GB 4702.14-1988 Metal Chromium Chemical Analysis Method Infrared Absorption Method Determination of Carbon Content
GB/T 639-2008 Chemical reagent.Sodium carbonate anhydrous
GB/T 1397-2015 Chemical reagent.Potassium carbonate anhydrous
GB 7749-1987 Test Method for Splitting Strength of Adhesives (Metal to Metal)
GB 10621-2006 Food additive liquid carbon dioxide
GB/T 23277-2009 Chemical analysis methods of catalysts containing precious metals. Determination of platinum，palladium and rhodium in automobile exhaust-purifying catalysts.Spectrophotometry
GB/T 10726-2007 Chemical reagent.General method for the determination of metals by solvent extraction followed by AAS
GB/T 31589-2015 Analytical method of chemical composition for activated MDEA decarbonization desulfurization agent
GB 7750-1987 Test Method for Tensile Shear Creep Properties of Adhesives (Metal to Metal)

IT-UNI, metal carbide

UNI 3811-1968 Sintered metal carbide inserts for single edge tools
UNI 6826-1971 Powder metallurgy. Sintered metal carbides. Chemical composition, structure and grading
UNI 7273-1974 Multi-edge penetration of sintered metal carbides. size
UNI 7659-1977 Synthetic metal carbide plate for twist drill bits
UNI 7274-1974 Multi-edge penetration of sintered metal carbides. Dimensional inspection
UNI 5824-1979 Powder metallurgy. More permeable than sintered metal materials and sintered metal carbides. volumetric mass determination
UNI 7359-1974 Metal carburizing treatment. Sulfur nitriding
UNI 6370-1968 Tools with sintered metal carbonized inserts for external drain channels
UNI 6372-1968 Internal drain channel with cutter with sintered metal carbide inserts
UNI ISO 5396:1978 Hardmetal heading dies. Terminology.
UNI 7657-1977 Twist drill bit with synthetic metal carbide plate cylindrical handle
UNI 6374-1968 External drain channel gasket with cutter with sintered metal carbide insert
UNI ISO 2804:1977 Wire. Drawing templates for rods and tubes. Unprocessed sintered metal carbonized core. size
UNI 7658-1977 Twist drill bit with synthetic metal carbide plate Morse tapered handle
UNI 7358-1974 Metal carburizing treatment. Aerated salt nitriding
UNI 4109-1968 General purpose single-edged knife with sintered metal carbide blade. Breaking Knife (ISO 7)
UNI 4108-1968 General purpose single-edged knife with sintered metal carbide blade. Breaking knife (ISO 5)
UNI 4105-1968 General purpose single-edged knife with sintered metal carbide blade. Finishing straight knife
UNI 4102-1968 General purpose single-edged knife with sintered metal carbide blade. Straight cutting knife (ISO 1)
UNI 4107-1968 General purpose single-edged knife with sintered metal carbide blade. Broad end knife (ISO 4)
UNI 4103-1968 General purpose single-edged knife with sintered metal carbide blade. Cutting scimitar (ISO 2)
UNI 4106-1968 General purpose single-edged knife with sintered metal carbide blade. Finishing scimitar (ISO 3)
UNI 4104-1968 General purpose single-edged knife with sintered metal carbide blade. Straight convex edge scimitar (ISO 6)
UNI 4101-1968 General purpose single-edged knife with sintered metal carbide blade. List of common categories
UNI 4110-1968 General purpose single-edged knife with sintered metal carbide blade. Jack cutting machete (ISO 8)
UNI 3677-1955 Chemical analysis methods of metallic materials. Determination of total carbon in nickel. direct combustion volume measurement method
UNI 4972-1976 Sintered metal carbides for machining. Main units and application units are determined

PL-PKN, metal carbide

PN H04232-03-1986 Chemical analysis of alloy components Chromium metallic Determination of carbon
PN H04707-1991 Non-ferrous metals and alloys. Determination of carbon content
PN H92601-1971 Carbon steel Wire rod for po?ented wire
PN H84030-02-1989 Structural alloyed steel Carburising steel Grades
PN H04240-05-1992 Chemical analysis of sintered carbides (hardmetals) Determination of total carbon content
PN H04782-10-1986 Chemical analysis of nickel alloy for electronic Determination of carbon

Anhui Provincial Standard of the People's Republic of China, metal carbide

DB34/T 1239-2010 Phosphating agent for metal surface treatment

工业和信息化部, metal carbide

HG/T 5765-2020 Determination of metal elements in catalytic cracking catalysts
HG/T 2779-2016 Carbon monoxide sulfur tolerant shift catalyst
JB/T 5204-2018 Chemical analysis method of silicon carbide deoxidizer
JC/T 2605-2021 Fluorocarbon coated metal plate for building decoration
HG/T 5596-2019 Carbon monoxide medium-high pressure sulfur-tolerant shift catalyst
HG/T 5763-2020 Determination of metal elements in metallocene polyolefin catalysts by inductively coupled plasma optical emission spectrometry
YS/T 1252-2018 Duplex carbide for cemented carbide
HG/T 5910-2021 Analysis method of chemical components of bimetal-supported polyether polyol synthesis catalyst
HG/T 5525-2019 Aluminum-nickel alloy hydrogenation catalyst
HG/T 5338-2018 Molecular sieve adsorbent for decarbonizing oxygen compounds

GM North America, metal carbide

GM 9985509-1989 Sealant - Adhesive, Elastometric, Metal to Metal
GM GM9020P-1988 Test for Metal to Metal Sealers - Adhesives
GM 9985303-1994 Sealant - Adhesive, Elastomeric, Metal to Metal
GM 9981673-2002 Adhesive - Metal-to-Metal Low Strength
GM GM9509P-1995 Solvent Rub Method for Determining Cure of Painted Metal or Plastic Substrates

British Standards Institution (BSI), metal carbide

BS ISO 2804:1996 Wire, bar or tube drawing dies - As-sintered pellets of hardmetal (carbide) - Dimensions
BS ISO 2804:1997 Wire, bar or tube drawing dies. As-sintered pellets of hardmetal (carbide). Dimensions
BS EN 15006:2007 Metal aerosol containers - Aluminium containers - Dimensions of the 25,4 mm aperture
BS EN ISO 7625:2007 Sintered metal materials, excluding hardmetals. Preparation of samples for chemical analysis for determination of carbon content
BS EN ISO 7625:2012 Sintered metal materials, excluding hardmetals. Preparation of samples for chemical analysis for determination of carbon content
BS EN 15006:2006 Metal aerosol containers - Aluminium containers - Dimensions of the 25,4 mm aperture
BS EN ISO 21068-3:2008 Chemical analysis of silicon-carbide-containing raw materials and refractory products -Part 3: Determination of nitrogen, oxygen and metallic and oxidic constituents
BS EN 15007:2006 Metal aerosol containers - Tinplate containers - Dimensions of two and three-piece cans
BS EN 15513:2007 Chemicals used for treatment of swimming pool water - Carbon dioxide
BS EN ISO 17072-2:2019 Leather. Chemical determination of metal content. Total metal content
BS EN ISO 17072-1:2011 Leather. Chemical determination of metal content. Extractable metals
BS EN ISO 17072-2:2011 Leather. Chemical determination of metal content. Total metal content
BS EN ISO 17072-2:2022 Leather. Chemical determination of metal content. Total metal content
BS EN ISO 17072-1:2019 Leather. Chemical determination of metal content. Extractable metals

PT-IPQ, metal carbide

NP 3304-1988 Small tools Hardmetal heading dies. Terminology
NP 3302-1988 Small tools Wire, bar or tube drawing dies. As sintered pellets of hard metal (carbide). Dimensions
NP 2176-1986 tool. Hard metal rotating percussion blades (metal carbide) used in construction projects. Relevant size requirements

(U.S.) Ford Automotive Standards, metal carbide

FORD ESK-M2G307-A2-1987 ADHESIVE, POLYURETHANE - METAL TO METAL - HEAT CURING - HOT APPLICABLE
FORD FLTM BU 119-1-2000 INDUCTION CURE TEST FOR METAL BONDING ADHESIVES
FORD FLTM BU 119-01-2000 INDUCTION CURE TEST FOR METAL BONDING ADHESIVES
FORD FLTM EU-BU 003-2-2000 BLOCK SHEAR STRENGTH OF METAL TO METAL ADHESIVES
FORD FLTM BU 003-2-2000 BLOCK SHEAR STRENGTH OF METAL TO METAL ADHESIVES
FORD FLTM BU 003-02-2000 BLOCK SHEAR STRENGTH OF METAL TO METAL ADHESIVES
FORD FLTM EU-BU 003-02-2000 BLOCK SHEAR STRENGTH OF METAL TO METAL ADHESIVES
FORD M5B290-A-1989 METAL CLEANER - IRON PHOSPHATE
FORD ESB-M98D10-A1-2010 LAMINATE, FLUOROCARBON FILM/METAL, EXTERIOR GRADE ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD FLTM BJ 004-01-2001 ANILINE POINT OF HYDROCARBON SOLVENTS
FORD U-MC002-8005-1989 LUBRICANT - CONVEYOR HIGH TEMP NON CARBONISING
FORD FLTM EU-BA 054-01-2000 METAL FOIL METHOD FOR DETERMINATION OF C- AND N-POTENTIAL OF CARBURIZING AND CARBONITRIDING FURNACE ATMOSPHERES
FORD ESK-M2G365-A2-1995 ADHESIVE, POLYURETHANE, TWO COMPONENT, SOLVENT FREE, METAL TO E-COATED METAL, ISOCYANATE COMPONENT

RU-GOST R, metal carbide

GOST 27069-1986 Ferroalloys, metal chromium and metal manganese. Methods for determination of carbon
GOST 5535-1976 Semicoke carburizator. Specifications
GOST 22720.3-1977 Rare metals and their alloys. Method for the determination of carbon
GOST 23401-1990 Metal powders. Catalysts and carriers. Determination of specific area
GOST 30642-1999 Sintered metal materials, excluding hardmetals. Preparation of samples for chemical analysis for carbon content
GOST 22720.1-1977 Rare metals and their alloys. Methods for the determination of oxygen, hydrogen, nitrogen and carbon
GOST 17319-1976 Reagents. Methods for the determination of heavy metals

Professional Standard - Electron, metal carbide

SJ/T 11171-1998 Specification for single and double sided carbon-coated printed boards without interlayer connection
SJ/T 10168.4-1991 Tungsten Carbide-Copper alloy
SJ/T 9503.10-1991 Fixed metallized polyethylene terephthalate film dielectric d.c. capacitors--Quality grading standard

Professional Standard - Agriculture, metal carbide

GB 688-1992 Chemical Reagent Carbon Tetrachloride
GB 9735-1988 General method for the determination of heavy metals in chemical reagents
GB 9856-1988 chemical reagent sodium carbonate
T/CRIAC 0003-2019 Reagents for environmental analysis -Carbon disulfide
GB 639-1986 Chemical Reagent Anhydrous Sodium Carbonate
GB 9737-1988 General rules for the determination of easily carbonized substances in chemical reagents
GB 10726-1989 General method for the determination of metal impurities by chemical reagent solvent extraction-atomic absorption spectrometry

Professional Standard - Light Industry, metal carbide

QB/T 4055.2-2011 Cermet casings of watches.Part 2: Carbide cermet casings
QB/T 2117-1995 Universal water-based metal cleaner

Professional Standard - Ferrous Metallurgy, metal carbide

YB/T 4403-2014 Graphitized recarburizer
YB/T 023-1992 Carbon steel cold-rolled strip for metal hose
YB/T 175-2000 The determination of silicon carbide in carborundum

United States Navy, metal carbide

NAVY MIL-C-20217-1951 COMPOUND, CARBURIZING
NAVY MIL-V-20064 E-1972 VALVE, NONFERROUS, FOR USE WITH HALOGENATED REFRIGERANTS
NAVY QPL-MMM-A-132-10 NOTICE 2-2010 ADHESIVES, HEAT RESISTANT, AIRFRAME STRUCTURAL: METAL TO METAL
NAVY QPL-MMM-A-132-2012 ADHESIVES, HEAT RESISTANT, AIRFRAME STRUCTURAL, METAL TO METAL
NAVY QPL-MMM-A-132-2013 ADHESIVES, HEAT RESISTANT, AIRFRAME STRUCTURAL, METAL TO METAL
NAVY QPL-MMM-A-132-QPD-2012 ADHESIVES, HEAT RESISTANT, AIRFRAME STRUCTURAL, METAL TO METAL
NAVY MMM-A-132 B NOTICE 2-2005 ADHESIVES, HEAT RESISTANT, AIRFRAME STRUCTURAL, METAL TO METAL
NAVY MMM-A-132 B-1994 ADHESIVES, HEAT RESISTANT, AIRFRAME STRUCTURAL, METAL TO METAL
NAVY QPL-MMM-A-134-QPD-2010 ADHESIVE, EPOXY RESIN, METAL TO METAL STRUCTURAL BONDING
NAVY QPL-MMM-A-134-2012 ADHESIVE, EPOXY RESIN, METAL TO METAL STRUCTURAL BONDING
NAVY QPL-MMM-A-134-2013 ADHESIVE, EPOXY RESIN, METAL TO METAL STRUCTURAL BONDING
NAVY MMM-A-1754 NOTICE 1-2001 ADHESIVE AND SEALING COMPOUND, EPOXY, METAL FILLED
NAVY MMM-A-1754-1973 ADHESIVE AND SEALING COMPOUND, EPOXY, METAL FILLED
NAVY MIL-R-24159 A VALID NOTICE 1-1989 RECEPTACLE, CANISTER, CO2 ABSORBENT
NAVY MIL-R-24159 A-1983 RECEPTACLE, CANISTER, CO2 ABSORBENT
NAVY MIL-P-81985 (1)-1984 PEENING OF METALS [Superseded: SAE AMS-P-81985A, SAE AMS-P-81985]
NAVY MIL-P-81985-1974 PEENING OF METALS
NAVY MMM-A-138 B-1986 ADHESIVE, METAL TO WOOD, STRUCTURAL
NAVY MMM-A-134 NOTICE 1-2001 ADHESIVE, EPOXY RESIN, METAL TO METAL STRUCTURAL BONDING
NAVY MMM-A-134 (1)-1999 ADHESIVE, EPOXY RESIN, METAL TO METAL STRUCTURAL BONDING
NAVY MMM-A-134-1970 ADHESIVE, EPOXY RESIN, METAL TO METAL STRUCTURAL BONDING
NAVY QPL-MMM-A-132-10 NOTICE 2-2005 ADHESIVES, HEAT RESISTANT, AIRFRAME STRUCTURAL: METAL TO METAL
NAVY QPL-MMM-A-132-9 (4)-1991 ADHESIVES, HEAT RESISTANT, AIRFRAME STRUCTURAL: METAL TO METAL
NAVY QPL-MMM-A-132-9-1988 ADHESIVES, HEAT RESISTANT, AIRFRAME STRUCTURAL: METAL TO METAL
NAVY QPL-MMM-A-134-11 NOTICE 1-2001 ADHESIVE, EPOXY RESIN, METAL TO METAL STRUCTURAL BONDING
NAVY QPL-MMM-A-134-10-1997 ADHESIVE, EPOXY RESIN, METAL TO METAL STRUCTURAL BONDING
NAVY MIL-C-82594 NOTICE 1-1996 CORROSION PREVENTIVE COMPOUND AND SURFACE SEALER FOR NONFERROUS METALS
NAVY MIL-C-82594-1971 CORROSION PREVENTIVE COMPOUND AND SURFACE SEALER FOR NONFERROUS METALS

Japanese Industrial Standards Committee (JISC), metal carbide

JIS K 8732:2011 Carbon disulfide (Reagent)
JIS K 8617:2007 Calcium carbonate (Reagent)
JIS K 8622:2007 Sodium hydrogen carbonate (Reagent)
JIS G 1323-1:2017 Method for chemical analysis of chromium metal -- Part 1: Determination of carbon content
JIS Z 2615:1996 General rules for determination of carbon in metallic materials
JIS G 1322-2:2010 Method for chemical analysis of metallic silicon -- Part 2: Methods for determination of carbon content
JIS Z 3183:2012 Classification for deposited metal of submerged arc welding for carbon steel and low alloy steel
JIS G 1321-1:2009 Method for chemical analysis of manganese metal -- Part 1: Methods for determination of carbon content
JIS Z 2615:2009 General rules for determination of carbon in metallic materials
JIS Z 2615:2015 General rules for determination of carbon in metallic materials
JIS Z 2615 AMD 1:2006 General rules for determination of carbon in metallic materials (Amendment 1)

U.S. Military Regulations and Norms, metal carbide

ARMY MIL-S-46049 C REINST NOTICE 2-1998 STRIP, METAL, CARBON STEEL, COLD ROLLED, HARDENED AND TEMPERED SPRING QUALITY
ARMY MIL-S-46049 C-1987 STRIP, METAL, CARBON STEEL, COLD ROLLED, HARDENED AND TEMPERED SPRING QUALITY
ARMY A-A-52515 VALID NOTICE 1-2004 POWDER, CHROMIUM CARBIDE-NICKEL CHROMIUM ALLOY (METRIC)
ARMY A-A-52515-1995 COMMERCIAL ITEM DESCRIPTION POWDER, CHROMIUM CARBIDE-NICKEL CHROMIUM ALLOY (METRIC)
ARMY MIL-D-3945 B NOTICE 1-1996 DETECTOR KIT; CARBON MONOXIDE, COLORIMETRIC
ARMY MIL-D-3945 B-1982 DETECTOR KIT; CARBON MONOXIDE, COLORIMETRIC

Defense Logistics Agency, metal carbide

DLA MS500106 REINST NOTICE 2-2006 BAR, METAL, ROUND, STEEL, CARBON, 1018
DLA MS500106-1987 BAR, METAL, ROUND, STEEL, CARBON, 1018
DLA MS500106 VALID NOTICE 3-2013 Bar, Metal, Round, Steel, Carbon 1018
DLA MS500106 (1)-2011 BAR, METAL, ROUND, STEEL, CARBON 1018
DLA A-A-59197 B-2005 FATTY OIL (FOR METAL-WORKING LUBRICANTS)

BR-ABNT, metal carbide

ABNT EB-1137-1980 Metallurgical silicon carbide
ABNT NBR 16136 Versão Corrigida-2012 Metal caps for closing glass bottles for carbonated and non-carbonated beverages

YU-JUS, metal carbide

JUS C.A4.055-1987 Mechanical testing of meta/s. Determination of apparent hardness ofs/nteres metal materials, excluding hardmeta/s. Case-hardened ferrous materials, surface enriched bycarbon orcarbon and nitrogen
JUS C.A2.052-1987 Metals tests. Determination of the effective depth ofcarburized and hardened cases ofsteels
JUS H.G8.159-1983 Rmgents. Sodium carbonata anhydrous and sodium carbonate decahydrate. Datarmination of hevyma- tak contant (as Pb). CoJorimetric method
JUS H.G8.053-1983 Reagents. Hydrogen peroxide. Determination of heavy metals content (as Pb). Colorimetric method
JUS H.G8.084-1983 Reagents. Sodium chloride. Determination of heavy meta/s content (as Pb). Colorimetric method
JUS H.G8.105-1984 Reagents. Potassium chloride. Determination of heavy metals content (asPb). Colorimetric method
JUS C.N2.005-1988 Powder metallurgy. Sintered metal materials, excluding hardmetals. PrepaPowder metallurgy. Sintered metal materials, excluding hardmetals. Preparation of samples for chemical analysis for determination of carbon content

Group Standards of the People's Republic of China, metal carbide

T/CRIAC 0048-2021 Chemical reagent—Strontium carbonte
T/CRIAC 0009-2020 Chemical reagent—Lead carbonate
T/CPCIF 0192-2022 Ru-Zn bimetallic catalyst for benzene to cyclohexene
T/CSTM 00319-2020 Front-end hydrogenation catalyst for C2 fraction
T/CASME 99-2022 Noble metal catalyst support High purity pseudoboehmite
T/LNIQA 008-2023 Passivating mcrobial agent for heavy metals in agricultural soil
T/CSTM 00469-2022 Biochar attapulgite compound for soil heavy metal passivator
T/CASAS 006-2020 The general specification for silicon carbide metal-oxide-semiconductor field-effect-transistor
T/CRIAC 0054-2021 Chemical reagent—Lead hydroxide carbonate
T/CNIA 0057-2020 Calcium Carbonate Supported Palladium Catalyst
T/CECS 10330-2023 Anti-fouling and easy-to-clean fluorocarbon coated metal plate
T/GDES 5-2016 Guidance for reporting of carbon dioxide emission of the nonferrous metal enterprise
T/ZZB 2010-2020 Fluorocarbon film laminated metal plate for building decoration
T/CSTM 00320-2020 Tail-end hydrogenation catalyst for C2 fraction
T/SQIA 051-2023 Technical requirements for carbon footprint assessment of metal furniture
T/CASAS 015-2022 Power cycling test method for silicon carbide metal-oxide-semiconductor field-effect-transistor（SiC MOSFET）
T/WSES 0001-2023 Technical regulation for the preparation of silicon-rich biochar for soil heavy metal passivator
T/CNIA 0099-2021 Green Design Product Evaluation Technical Specifications Alumina Supported Precious Metal Catalysts
T/GMES 021-2022 5% Ni-based tungsten carbide alloy powder
T/SQIA 029-2023 Technical requirements for carbon footprint assessment of precious metal adornment
T/HBZXL 008-2022 Infrared metallized window
T/CNIA 0097-2021 Green Design Product Evaluation Technical Specifications Noble Metal Carbon-Supported Catalysts

AENOR, metal carbide

UNE 30104:1959 ANALYSIS REAGENTS. CARBON BISULPHIDE.
UNE 30105:1959 ANALYSIS REAGENTS. CARBON TETRACHLORIDE.

Canadian General Standards Board （CGSB), metal carbide

CGSB 25.6-94-CAN/CGSB-1994 Metal Polish
CGSB 31-GP-107MA-1990 Non-Inhibited Phosphoric Acid Base Metal Conditioner and Rust Remover
CGSB 31-GP-108MA-1990 Inhibited Phosphoric Acid Base Metal Conditioner and Rust Remover

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, metal carbide

GB/T 35759-2017 Metal cleaner

CZ-CSN, metal carbide

CSN ON 68 1136-1964 metal polish
CSN 65 2025-1962 Testíng of technical alkali carbonates
CSN 22 0912-1988 Sintered carbide replaceable cutting tips with rounded tip, without fixing hole. Dimensions
CSN 05 5705 Z1-1999 Metal brazing. Flux welds metal. Technical delivery regulations
CSN 22 0913-1988 Replaceable sintered carbide cutting tips with rounded tip and with cylindrical fixing hole. Dimensions
CSN 22 3800-1978 Metal-cutting tools. Turret and boring tools with carbide tips. Survey and technical regulations
CSN 64 0243-1983 Determination of the loss f plasticizers by the ctivated carbon method
CSN 42 2291-1979 Metallic and nitrided manganese
CSN 22 0916-1988 Replaceable sintered carbide cutting tips with wiper tip without fixing hole. Dimensions
CSN 68 4135-1988 Pure Chemicals. etermination of small amounts f carbonates
CSN 05 0027-1989 Welding. Shapes and dimensions of weld edges. Metal-arc welding of steel in C02 shielding atmosphere
CSN 22 0914-1988 Replaceable sintered carbide cutting tips with rounded tip and with partly cylindrical fixing hole. Dimensions

American Society for Testing and Materials (ASTM), metal carbide

ASTM UOP873-86 Noble Metals and Modifiers in Catalysts by ICP-AES
ASTM D7206-06 Standard Guide for Cyclic Deactivation of Fluid Catalytic Cracking (FCC) Catalysts with Metals
ASTM D7206/D7206M-19 Standard Guide for Cyclic Deactivation of Fluid Catalytic Cracking (FCC) Catalysts with Metals
ASTM D7206/D7206M-06(2012)e1 Standard Guide for Cyclic Deactivation of Fluid Catalytic Cracking (FCC) Catalysts with Metals
ASTM D7206/D7206M-06(2013)e1 Standard Guide for Cyclic Deactivation of Fluid Catalytic Cracking (FCC) Catalysts with Metals
ASTM D4463/D4463M-19 Standard Guide for Metals Free Steam Deactivation of Fresh Fluid Cracking Catalysts
ASTM A121-13(2017) Standard Specification for Metallic-Coated Carbon Steel Barbed Wire
ASTM E1718-95 Standard Guide for Administrative and Engineering Controls for Silicon Carbide Whisker Work Areas
ASTM E1718-95(2004) Standard Guide for Administrative and Engineering Controls for Silicon Carbide Whisker Work Areas
ASTM D2251-10 Standard Test Method for Metal Corrosion by Halogenated Organic Solvents and Their Admixtures
ASTM A1003/A1003M-05 Standard Specification for Steel Sheet, Carbon, Metallic- and Nonmetallic-Coated for Cold-Formed Framing Members
ASTM A1003/A1003M-10 Standard Specification for Steel Sheet, Carbon, Metallic- and Nonmetallic-Coated for Cold-Formed Framing Members
ASTM UOP927-92 Trace Metallic Impurities in Fresh Catalysts by ICP-AES
ASTM D4463-96 Standard Guide for Metals Free Steam Deactivation of Fresh Fluid Cracking Catalysts
ASTM D4463-96(2001) Standard Guide for Metals Free Steam Deactivation of Fresh Fluid Cracking Catalysts
ASTM D4463-96(2006) Standard Guide for Metals Free Steam Deactivation of Fresh Fluid Cracking Catalysts
ASTM E191-64(2017) Standard Specification for Apparatus For Microdetermination of Carbon and Hydrogen in Organic and Organo-Metallic Compounds
ASTM B890-02 Standard Test Method for Determination of Metallic Constituents of Tungsten Alloys and Tungsten Hardmetals by X-Ray Fluorescence Spectrometry
ASTM B890-98 Standard Test Method for Determination of Metallic Constituents of Tungsten Alloys and Tungsten Hardmetals by X-Ray Fluorescence Spectrometry
ASTM D1780-05(2020) Standard Practice for Conducting Creep Tests of Metal-to-Metal Adhesives
ASTM D4463/D4463M-96(2012)e1 Standard Guide for Metals Free Steam Deactivation of Fresh Fluid Cracking Catalysts
ASTM D4463/D4463M-96(2013)e1 Standard Guide for Metals Free Steam Deactivation of Fresh Fluid Cracking Catalysts
ASTM A1003/A1003M-13b Standard Specification for Steel Sheet, Carbon, Metallic- and Nonmetallic-Coated for Cold-Formed Framing Members
ASTM D1062-08(2023) Standard Test Method for Cleavage Strength of Metal-to-Metal Adhesive Bonds
ASTM E1941-10 Standard Test Method for Determination of Carbon in Refractory and Reactive Metals and Their Alloys by Combustion Analysis
ASTM A121-07 Standard Specification for Metallic-Coated Carbon Steel Barbed Wire
ASTM A121-19 Standard Specification for Metallic-Coated Carbon Steel Barbed Wire
ASTM A121-22 Standard Specification for Metallic-Coated Carbon Steel Barbed Wire
ASTM A121-13 Standard Specification for Metallic-Coated Carbon Steel Barbed Wire

Society of Automotive Engineers (SAE), metal carbide

SAE J1851-1987 Induction Cure Test for Metal Bonding Adhesives
SAE AMS1650C-2001 Polish, Aircraft Metal
SAE AMS1650D-2021 Polishing Compound, Aircraft Metal
SAE AMS1626B-1989 Desmutter, Aluminum, Liquid
SAE AS6271A-2020 Halocarbon Clean Agent Hand-Held Fire Extinguisher
SAE AMS1625B-1989 Desmutter, Aluminum, Powdered
SAE AMS3848-1995 CLOTH, NYLON, METALLIZED
SAE AMS3848B-1986 Cloth, Nylon, Metallized
SAE AMS3848A-1993 CLOTH, NYLON, METALLIZED

European Committee for Standardization (CEN), metal carbide

EN 15006:2006 Metal aerosol containers - Aluminium containers - Dimensions of the 25,4 mm aperture
EN ISO 7625:2012 Sintered metal materials, excluding hardmetals - Preparation of samples for chemical analysis for determination of carbon content (ISO 7625:2012)
EN 936:2006 Chemicals used for treatment of water intended for human consumption - Carbon dioxide
EN 936:2013 Chemicals used for treatment of water intended for human consumption - Carbon dioxide
EN 15513:2007 Chemicals used for treatment of swimming pool water - Carbon dioxide
EN ISO 17072-2:2022 Leather - Chemical determination of metal content - Part 2: Total metal content (ISO 17072-2:2022)
EN ISO 17072-2:2011 Leather - Chemical determination of metal content - Part 2: Total metal content (ISO 17072-2:2011)
EN 1018:1998 Chemicals Used for Treatment of Water Intended for Human Consumption - Calcium Carbonate
EN 24505:1993 Hardmetals - Metallographic Determination of Porosity and Uncombined Carbon
EN ISO 7625:2010 Sintered metal materials, excluding hardmetals - Preparation of samples for chemical analysis for determination of carbon content

SAE - SAE International, metal carbide

SAE J1851-2021 Induction Cure Test for Metal Bonding Adhesives@ Recommended Practice
SAE AMS3848B-1995 CLOTH@ NYLON@ METALLIZED

German Institute for Standardization, metal carbide

DIN EN 15006:2006 Metal aerosol containers - Aluminium containers - Dimensions of the 25,4 mm aperture; English version of DIN EN 15006:2006-12
DIN 43080:1968 Intermediate metal sheets for carbon-brush-holders
DIN V 65579:1991 Aerospace; carbon fibres; chemical analysis; determination of the metalloid elements
DIN 30902:2016 Heat treatment of ferrous materials - Light-microscopical determination of the depth and porosity of the compound layer of nitrided and nitro-carburized ferrous parts
DIN 30902:2016-12 Heat treatment of ferrous materials - Light-microscopical determination of the depth and porosity of the compound layer of nitrided and nitro-carburized ferrous parts
DIN 54455:2016 Testing of adhesives for metals and of bonded metal joints - Torsional shear test
DIN 54455:1984 Testing of adhesives for metals and of bonded metal joints; torsional shear test
DIN 54387-4:2023-08 Testing of ceramic raw materials and ceramic materials - Chemical analysis of boron carbide, boron nitride, metal borides and elemental boron - Part 4: Determination of metallic main components and trace impurities
DIN EN ISO 7625:2013-03 Sintered metal materials, excluding hardmetals - Preparation of samples for chemical analysis for determination of carbon content (ISO 7625:2012); German version EN ISO 7625:2012

AIA/NAS - Aerospace Industries Association of America Inc., metal carbide

NAS3316-1967 Metal Stock List@ Wire - Carbon Steel
NAS3312-1967 Metal Stock List@ Carbon & Alloy Steel Plate
NAS3311-1967 Metal Stock List@ Carbon & Alloy Steel Sheet & Strip

IN-BIS, metal carbide

IS 9595-1980 Recommendations for metal arc welding of carbon steel and carbon manganese steel
IS 6271-1971 Specification for metal polishes (special)
IS 6226 Pt.1-1971 Recommendations for metal chemical analysis instruments Part Ⅰ Determination of carbon by direct combustion method
IS 11515 Pt.3-1986 Specification for fixed metallized polycarbonate film dielectric capacitors Part 3 Type FCCM2
IS 2879-1975 Specification for mild steel for metal arc welding electrode core wires

Professional Standard - Textile, metal carbide

FZ/T 50060-2022 Carbon Fiber Alkali Metal and Alkaline Earth Metal Content Test Method

Guangdong Provincial Standard of the People's Republic of China, metal carbide

DB44/T 1943-2016 Guidelines for Reporting Carbon Dioxide Emissions Information of Non-ferrous Metal Enterprises

General Motors do Brasil, metal carbide

GMSA EMS 9309663-2011 Metal - metal adhesive - medium resistance - high tixotropy - medium expansion Adesivo metal-metal - m閐ia resist阯cia - alta tixotropia - m閐ia expans鉶 Do Not use on New Programs; No Replacement
GMSA EMS 9309864-2011 Metal / Metal Adhesive - Medium Cure ? Medium Expansion Adesivo Metal / Metal - M茅dia Cura - M茅dia Expans茫o Revision A; Do Not use on New Programs; No Replacement

Professional Standard - Petrochemical Industry, metal carbide

SH/T 0563-1993 551 metal deactivator

Professional Standard - Chemical Industry, metal carbide

HG/T 4196-2011 Chemical Reagent Sodium Carbonate Decahydrate (Sodium Carbonate)
HG/T 3556-2012 Low temperature carbon monoxide shift catalysts
HG 3556-2004 Low temperature carbon monoxide shift catalyst
HG/T 4349-2012 Carbonyl sulfide hydrolyzed catalysts at room temperature
HG/T 3546-2011 High temperature carbon monoxide shift catalysts
HG/T 2779-1996 Carbon Monoxide Sulfur Tolerant Shift Catalyst
HG 3546-2002 High temperature carbon monoxide shift catalysts
HG/T 4860-2015 Methanol to light olefins catalysts
HG/T 3446-2003 Chemical reagent.Chloroauric acid hydrated
HG 3-949-1981 Chemical Reagent Chlorauric Acid (Gold Chloride)
HG/T 5596～5597-2019 Medium and high pressure sulfur-resistant shift catalyst for carbon monoxide and activity test method for high-precision removal of hydrogen sulfide and sulfur oxide carbon purification catalyst (2019)
HG/T 2779-2009 Sulfur-tolerant carbon monoxide shift catalysts(low pressure part)
HG/T 2780-1996 Test method for carbon monoxide sulfur tolerant shift catalysts
HG/T 3544-1989 Test method for medium temperature shift catalysts for carbon monoxide
HG/T 5764～5767-2020 Determination of pore structure of petroleum refining catalysts, determination of metal elements in catalytic cracking catalysts, test methods for catalyst activity of supported rosin disproportionation and catalysts for cobalt and molybdenum sulfide (202
HG/T 2693-1995 Determination of Chemical Composition of Carbon Monoxide High Temperature Shift Catalyst
HG/T 5909～5910-2021 Analytical methods for the chemical composition of meropenem synthesis catalysts and bimetallic supported polyether polyol synthesis catalysts (2021)
HG/T 2693-2014 Analytical method of chemical composition in high temperature carbon monoxide shift catalyst
HG/T 4859-2015 Analytical method of chemical composition for carbonyl sulfide hydrolyzed catalysts at room temperature
HG/T 3553-2005 Analytical method of chemical composition in low temperature carbon monoxide shift catalyst
HG/T 2693-2007 Analytical method of chemical composition in high temperature carbon monoxide shift catalyst
HG/T 3553-2013 Analytical method of chemical composition in low temperature carbon monoxide shift catalyst

国家质量监督检验检疫总局, metal carbide

SN/T 4965-2017 Classification of Chemical Metals and Metal Compounds
SN/T 4966-2017 ChemicalsMethods for dissolution and transformation of metals and metal compounds in aquatic media

Military Standard of the People's Republic of China-General Armament Department, metal carbide

GJB 8040-2013 Specification for carbon dioxide absorbent
GJB 2845-1997 Specification for carbon fiber woven fabrics with wire
GJB 446-1988 Adhesive 90° Peel Strength Test Method (Metal to Metal)
GJB 445-1988 Test method for high temperature tensile strength of adhesives (metal to metal)
GJB 94-1986 Adhesives—Test Method for Uneven Peel Strength (Metal to Metal)
GJB 448-1988 Adhesive low temperature 90° peel strength test method (metal to metal)
GJB 447-1988 Adhesive high temperature 90° peel strength test method (metal to metal)
GJB 444-1988 Test method for high temperature tensile shear strength of adhesives (metal-to-metal)

HU-MSZT, metal carbide

MNOSZ 24165-1952 chemical crystalline carbonate
MNOSZ 5344-1952 Three-way catalysis. metal net
MSZ 12056-1959 Three-way catalysis. metal net

ES-AENOR, metal carbide

UNE 55 018 Carbon disulfide for grease solvents
UNE 30 104 Analytical reagents. Carbon disulfide S2CM 76,14
UNE 30 105 Analytical reagents. Carbon tetrachloride Cl4CM 153,84

Professional Standard - Machinery, metal carbide

JB/T 4323-2019 Test methods of water-based metal cleanser
JB/T 4323.1-1999 Water-based metal cleanser
JB/T 5204-2007 Chemical analysis methods for silicon carbide deoxyden
JB/T 5204-1991 Chemical analysis method of silicon carbide deoxidizer
JB/T 8354.4-2015 Metallic abrasives of shot blast cleaning and peening.Part 4: Low carbon cast steel shot
JB/T 8354.2-2015 Metal abrasives for shot peening and strengthening - Part 2: High carbon cast steel shot
JB/T 8354.3-2015 Metal abrasives for shot peening and strengthening - Part 3: High carbon cast steel grit

ZA-SANS, metal carbide

SANS 1579:2007 Liquid metal polish
SANS 339:2007 Sorbents for hydrocarbon-based products
SANS 10275:2003 Metallic materials - Sheet and strip - Determination of tensile strain hardening exponent

General Motors Corporation (GM), metal carbide

GM 9982267-2003 Adhesive, Hardener, SMC to Painted Metal or Plastic
GM 9984192-1997 Sealer - Preformed Patches Revision A

Professional Standard - Aviation, metal carbide

HB/Z 5083-2001 Reagents for analysis of metal plating and chemical overlay solutions
HB 7064.2-1994 Metal heat treatment salt bath chemical analysis method Barium carbonate precipitation separation acid-base titration method Determination of carbonate content
HB 6686-1992 Test Method for Tensile Shear Creep Properties of Adhesives (Metal to Metal)
HB 6685-1992 Test Method for Compression Shear Creep Properties of Adhesives (Metal to Metal)

国家市场监督管理总局、中国国家标准化管理委员会, metal carbide

GB/T 38596-2020 Determination method of heavy metal contents in the wastewater during catalyst production
GB/T 11376-2020 Metallic and other inorganic coatings—Phosphate conversion coating of metals

机械电子工业部, metal carbide

JB 5204-1991 Chemical analysis method of silicon carbide deoxidizer

Association of German Mechanical Engineers, metal carbide

VDI 2576-2010 Emission control - Carbothermic and metallothermic production of ferroalloys and silicon metal

工业和信息化部/国家能源局, metal carbide

JB/T 12889.2-2016 Diesel exhaust purification catalyst carrier Part 2: Metal carrier

Electronic Components, Assemblies and Materials Association, metal carbide

ECA 377-1970 Metallized Dielectric Capacitors in Metallic and Non-Metallic Cases for Direct Current Application ANSI C83.62-71

U.S. Air-Conditioning, Heating, and Refrigeration Institute (US-AHRI), metal carbide

ARI 700-2004 SPECIFICATIONS FOR FLUOROCARBON REFRIGERANTS

American National Standards Institute （ANSI), metal carbide

ANSI/ARI 700-2004 Specifications for Fluorocarbon Refrigerants
ANSI/AHRI 700 with Addenda 1 and 2-2011 Specification for Fluorocarbon Refrigerants
ANSI/AWS A5.1/A5.1M:2012 Specification for Carbon Steel Electrodes for Shielded Metal Arc Welding
ANSI/NEMA/ANSLG C78.43-2013 Single-Ended Metal Halide Lamps

Indonesia Standards, metal carbide

SNI 07-6174-1999 Determiniation of carbon content in metals by titrimetric neutralized methods
SNI 07-6586-2001 General rules for determination of carbon in metals
SNI 07-1057-1989 Silicon metals
SNI 07-6588-2001 Determination of carbon content in metals by gravimetric

AASHTO - American Association of State Highway and Transportation Officials, metal carbide

M 280-2003 Standard Specification for Metallic-Coated Carbon Steel Barbed Wire
M 280-2014 Standard Specification for Metallic-Coated (Carbon) Steel Barbed Wire
M 280-2009 Standard Specification for Metallic-Coated (Carbon) Steel Barbed Wire

FI-SFS, metal carbide

SFS-ISO 1462:1985 Metal coating. Catalyst erosion test. Identification of results from more expensive coatings compared to base metals

CEN - European Committee for Standardization, metal carbide

EN 936:1997 Chemicals Used for Treatment of Water Intended for Human Consumption - Carbon Dioxide
EN ISO 17072-2:2019 Leather - Chemical determination of metal content - Part 2: Total metal content

U.S. Air Force, metal carbide

AIR FORCE A-A-58060 A-2005 FLUOROCARBON AND OTHER REFRIGERANTS
AIR FORCE A-A-58060 B-2011 FLUOROCARBON AND OTHER REFRIGERANTS

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., metal carbide

ASHRAE REFRIGERATION SI CH 2-2006 SYSTEM PRACTICES FOR HALOCARBON REFRIGERANTS

Professional Standard - Traffic, metal carbide

JT/T 1149-2017 Layered double hydroxides anti ultraviolet aging agent used for pavement asphalt

Professional Standard - Coal, metal carbide

MT 869-2000 Carbon monoxide oxidative for filter self-rescuers

US-FCR, metal carbide

FCR UFGS-03 62 16.00 40-2006 CATALYZED METALLIC GROUT
FCR UFGS-09 97 01.00 10-2009 METALLIZING: HYDRAULIC STRUCTURES
FCR UFGS-07 16 19-2007 METALLIC OXIDE WATERPROOFING
FCR FED GSA/PBS 07140-1980 METALLIC OXIDE WATERPROOFING
FCR FED FCGS 07140-1979 METALLIC OXIDE WATERPROOFING

International Electrotechnical Commission (IEC), metal carbide

IEC 61167:1992 Metal halide lamps

TH-TISI, metal carbide

TIS 1035-1991 Standard for metal polish, liquid
TIS 1036-1991 Standard for metal polish, pasted

Universal Oil Products Company (UOP), metal carbide

UOP 927-1992 TRACE METALLIC IMPURITIES IN FRESH CATALYSTS BY ICP-AES

AT-ON, metal carbide

ONORM ISO 3364:1988 Indexable hardmetal (carbide) inserts with rounded corners, with cylindrical fixing hole; dimensions
ONORM EN 25923-1994 Fire protection. Fire extinguishing media. Carbon dioxide (ISO 5923:1989)
ONORM ISO 3365:1988 Indexable hardmetal (carbide) inserts with wiper edges, without fixing hole; dimensions

CENELEC - European Committee for Electrotechnical Standardization, metal carbide

EN 130500:1998 Sectional Specification: Fixed Metallized Polycarbonate Film Dielectric Capacitors for Direct Current

KR-KS, metal carbide

KS D ISO 7625-2016 Sintered metal materials, excluding hardmetals－Preparation of samples for chemical analysis for determination of carbon content
KS D ISO 7625-2021 Sintered metal materials, excluding hardmetals — Preparation of samples for chemical analysis for determination of carbon content

NL-NEN, metal carbide

NEN-ISO 5923:1994 Fire protection. Fire extinguishing media. Carbon dioxide (ISO 5923:1989)

国家食品药品监督管理局, metal carbide

YY/T 1523-2017 Carbon dioxide measurement kit (PEPC enzymatic method)

Standard Association of Australia （SAA）, metal carbide

AS/NZS 1553.1:1995 Covered electrodes for welding Part 1: Low carbon steel electrodes for manual metal-arc welding of carbon steels and carbon-manganese steels

AWS - American Welding Society, metal carbide

A5.1/A5.1M-2004 Specification for Carbon Steel Electrodes for Shielded Metal Arc Welding
A5.1-1978 Specification for Carbon Steel Electrodes for Shielded Metal ArcWelding
A5.1-1991 Specification for Carbon Steel Electrodes for Shielded Metal Arc Welding

The American Road & Transportation Builders Association, metal carbide

AASHTO M 280-2014 Standard Specification for Metallic-Coated (Carbon) Steel Barbed Wire

GOSTR, metal carbide

GOST 17319-2019 Reagents. Methods for determination of heavy metals

GM Europe, metal carbide

GME L 000 0406-1996 PVC Metal Adhesive (English/German)

IPC - Association Connecting Electronics Industries, metal carbide

IPC TM-650 2.3.30A-1981 Solvent pH Determination in Anhydrous Fluorocarbon Solvents

US-CFR, metal carbide

CFR FED FCGS 07140-1979 METALLIC OXIDE WATERPROOFING

Professional Standard-Safe Production, metal carbide

AQ 2007.1-2006 The guide of standardized specification of work safety for metal and nonmetal mines
AQ/T 2050.1-2016 Guidelines for standardization of safety standards for metal and nonmetal mines

未注明发布机构, metal carbide

BS 3146-1:1974(1999) Specification for Investment castings in metal — Part 1 : Carbon and low alloy steels

Danish Standards Foundation, metal carbide

DS/EN ISO 7625:2013 Sintered metal materials, excluding hardmetals - Preparation of samples for chemical analysis for determination of carbon content

Professional Standard - Railway, metal carbide

TB/T 1842.2-2002 Steeped metal carbon slider for electric locomotive power collector slider