ZH
RU
ES
Steps of UV testing
Steps of UV testing, Total:227 items.
In the international standard classification, Steps of UV testing involves: Quality, Air quality, Environmental testing, Construction materials, Solar energy engineering, Products of the textile industry, Ladders, External sewage systems, Paint ingredients, Analytical chemistry, Biology. Botany. Zoology, Organic chemicals, Vocabularies, Water quality, Electrical wires and cables, Petroleum products in general, Electrical and electronic testing, Paints and varnishes, Space systems and operations, Protective equipment, Semiconductor devices, Optics and optical measurements, Products of the chemical industry, Sterilization and disinfection, Fibre optic communications, Non-destructive testing, Road engineering, Clothes, Fuels, Iron and steel products, Installations in buildings, Lubricants, industrial oils and related products, Inorganic chemicals, Adhesives, Metalliferous minerals, Medical equipment, Components and accessories for telecommunications equipment, Rubber and plastics products, Elements of buildings, Test conditions and procedures in general.
Korean Agency for Technology and Standards (KATS), Steps of UV testing
- KS A IEC 61070:2003 Compliance test procedures for steady-state availability
- KS C IEC 61345-2002(2017) UV test for photovoltaic(PV) modules
- KS C IEC 61345-2002(2022) UV test for photovoltaic(PV) modules
- KS K 0850-2014 Test method for ultraviolet protection rate and ultraviolet protection factor of textiles
- KS M ISO 787-18:2007 General methods of test for pigments and extenders－Part 18：Determination of residue on sieve－Mechanical flushing procedure
- KS K 0850-2019 Test method for ultraviolet protection rate and ultraviolet protection factor of textiles
- KS B ISO 19232-2:2021 Non-destructive testing — Image quality of radiographs —Part 2: Determination of the image quality value using step/hole-type image quality indicators
- KS C IEC 60332-1-3-2014(2019) Tests on electric and optical fibre cables under fire conditions — Part 1-3: Test for vertical flame propagation for a single insulated wire or cable — Procedure for determination of flaming droplets/
British Standards Institution (BSI), Steps of UV testing
- BS PD CEN/TS 16637-1:2014 Construction products. Assessment of release of dangerous substances. Guidance for the determination of leaching tests and additional testing steps
- BS EN 61345:1998 UV test for photovoltaic (PV) modules
- BS EN ISO 787-18:1995 General methods of test for pigments and extenders. Determination of residue on sieve. Mechanical flushing procedure
- BS EN 16602-70-06:2014 Space product assurance. Particle and UV radiation testing for space materials
- BS EN 17658:2022 Chemical disinfectants and antiseptics. Chemical textile disinfection for the domestic area. Test method and requirements (phase 2, step 2)
- BS EN 61300-3-3:2003 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Examinations and measurements - Active monitoring of changes in attenuation and return loss
- BS EN ISO 24442:2011 Cosmetics. Sun protection test methods. In vivo determination of sunscreen UVA protection
- BS EN 17111:2018 Chemical disinfectants and antiseptics. Quantitative carrier test for the evaluation of virucidal activity for instruments used in the medical area. Test method and requirements (phase 2, step 2)
- 21/30432874 DC BS EN 17658. Chemical disinfectants and antiseptics. Chemical textile disinfection for the domestic area. Test method and requirements (phase 2, step 2)
- BS EN 14187-8:2003 Cold applied joint sealants - Test method for the determination of the artificial weathering by UV-irradiation
- BS 8628:2022 Disinfection using ultraviolet radiation. Methods for quantitative testing of automated ultraviolet disinfection activities by direct illumination. Determination of bactericidal, mycobactericidal, sporicidal, yeasticidal, fungicidal, virucidal…
- 21/30390982 DC BS 8628. Disinfection using ultraviolet radiation. Methods for quantitative testing of automated ultraviolet disinfection activities by direct illumination. Determination of bactericidal, mycobactericidal, sporicidal, yeasticidal, fungicidal, virucidal...
- 16/30348019 DC BS EN 14476 AMD2. Chemical disinfectants and antiseptics. Quantitative suspension test for the evaluation of virucidal activity in the medical area. Test method and requirements (Phase 2/Step 1)
- BS EN 16777:2018 Chemical disinfectants and antiseptics. Quantitative non-porous surface test without mechanical action for the evaluation of virucidal activity of chemical disinfectants used in the medical area. Test method and requirements (phase 2/step 2)
- BS EN 13624:2021 Tracked Changes. Chemical disinfectants and antiseptics. Quantitative suspension test for the evaluation of fungicidal or yeasticidal activity in the medical area. Test method and requirements (phase 2, step 1)
- 19/30395459 DC BS EN 13624. Chemical disinfectants and antiseptics. Quantitative suspension test for the evaluation of fungicidal or yeasticidal activity in the medical area. Test method and requirements (phase 2, step 1)
- BS EN 17126:2018 Chemical disinfectants and antiseptics. Quantitative suspension test for the evaluation of sporicidal activity of chemical disinfectants in the medical area. Test method and requirements (phase 2, step 1)
- BS EN 50289-4-17:2015 Tracked Changes. Communication cables. Specifications for test methods. Test methods for UV resistance evaluation of the sheath of electrical and optical fibre cable
- BS 3900-F19:2000 Methods of test for paint - Durability tests on paint films - Determination of resistance to cyclic corrosion conditions - Wet (salt fog)/dry/humidity/UV light - Part F19: Determination of resistance to cyclic corrosion conditions - Wet (salt fog)/dry/hum
- BS EN 1656:2019 Chemical disinfectants and antiseptics. Quantitative suspension test for the evaluation of bactericidal activity of chemical disinfectants and antiseptics used in the veterinary area. Test method and requirements (phase 2, step 1)
- 23/30468403 DC BS EN IEC 60068-2-87. Environmental Testing - Part 2-87. Tests-Test xx: UV-C Exposure of Materials and Components to Simulate Ultraviolet Germicidal Irradiation or Other Applications
- BS IEC 60747-14-11:2021 Semiconductor devices - Semiconductor sensors. Test method of surface acoustic wave-based integrated sensors for measuring ultraviolet, illumination and temperature
- BS EN 14897:2006+A1:2007 Water conditioning equipment inside buildings - Devices using mercury low-pressure ultraviolet radiators - Requirements for performance, safety and testing
- BS EN 17122:2019 Chemical disinfectants and antiseptics. Quantitative non- porous surface test for the evaluation of virucidal activity of chemical disinfectants and antiseptics used in the veterinary area. Test method and requirements. Phase2, step2
- 18/30372706 DC BS EN 13623. Chemical disinfectants and antiseptics. Quantitative suspension test for the evaluation of bactericidal activity against Legionella of chemical disinfectants for aqueous systems. Test method and requirements (phase 2, step 1)
- BS EN 13704:2018 Tracked Changes. Chemical disinfectants. Quantitative suspension test for the evaluation of sporicidal activity of chemical disinfectants used in food, industrial, domestic and institutional areas. Test method and requirements (phase 2, step 1)
(U.S.) Joint Electron Device Engineering Council Soild State Technology Association, Steps of UV testing
- JEDEC EIA-365-1969 Performance Test Procedure for Solar Cells and Calibration Procedure for Solar Cell Standards for Space Vehicle Service
- JEDEC JESD24-7-1992 Commutating Diode Safe Operating Area Test Procedure for Measuring DV/DT During Reverse Recovery of Power Transistors Addendum to JEDEC JESD 24
Electronic Components, Assemblies and Materials Association, Steps of UV testing
Canadian Standards Association (CSA), Steps of UV testing
- CSA C380-08 UPD 2-2008 Test procedure for the measurement of energy consumption of set-top boxes (STBs) First Edition
European Telecommunications Standards Institute (ETSI), Steps of UV testing
- ETSI TS 102 237-1-2003 Telecommunications and Internet Protocol Harmonization Over Networks (TIPHON) Release 4; Interoperability test methods and approaches; Part 1: Generic approach to interoperability testing (V4.1.1)
- ETSI EG 202 237-2007 Methods for Testing and Specification (MTS); Internet Protocol Testing (IPT); Generic approach to interoperability testing V1.1.2
- ETSI EG 202 237-2010 Methods for Testing and Specification (MTS); Internet Protocol Testing (IPT); Generic approach to interoperability testing (V1.2.1)
- ETSI TS 102 237-2-2003 Telecommunications and Internet Protocol Harmonization Over Networks (TIPHON) Release 4; Interoperability test methods and approaches; Part 2: H.323-SIP interoperability test scenarios to support multimedia communications in NGN environments (V4.1.1)
German Institute for Standardization, Steps of UV testing
- DIN EN 12791:2018-01 Chemical disinfectants and antiseptics - Surgical hand disinfection - Test method and requirements (phase 2, step 2); German version EN 12791:2016+A1:2017
- DIN EN 13101:2003-04 Steps for underground man entry chambers - Requirements, marking, testing and evaluation of conformity; German version EN 13101:2002
- DIN EN 16637-1:2021 Construction products - Assessment of release of dangerous substances - Part 1: Guidance for the determination of leaching tests and additional testing steps; German and English version prEN 16637-1:2021
- DIN 19294-1:2020-08 Devices for the disinfection of water using ultraviolet radiation - Part 1: Devices equipped with UV low pressure lamps - Requirements and testing / Note: This standard is part of the DVGW body of rules.
- DIN 19294-1:2020 Devices for the disinfection of water using ultraviolet radiation - Part 1: Devices equipped with UV low pressure lamps - Requirements and testing
- DIN EN 16602-70-06:2015-01 Space product assurance - Particle and UV radiation testing for space materials; English version EN 16602-70-06:2014
- DIN 19294-3:2020-08 Devices for the disinfection of water using ultraviolet radiation - Part 3: Reference radiometers for devices equipped with UV low pressure lamps - Requirements and testing / Note: This standard is part of the DVGW body of rules.
- DIN 19294-3:2020 Devices for the disinfection of water using ultraviolet radiation - Part 3: Reference radiometers for devices equipped with UV low pressure lamps - Requirements and testing
- DIN EN 17422:2022-09 Chemical disinfectants and antiseptics - Quantitative surface test for the evaluation of teat disinfectants used in the veterinary area - Test method and requirements (phase 2 step 2); German version EN 17422:2022
- DIN EN 13758-1:2007-03 Textiles - Solar UV protective properties - Part 1: Method of test for apparel fabrics; German version EN 13758-1:2001+A1:2006
- DIN EN 17111:2018-12 Chemical disinfectants and antiseptics - Quantitative carrier test for the evaluation of virucidal activity for instruments used in the medical area - Test method and requirements (phase 2, step 2); German version EN 17111:2018
- DIN EN 14836:2017 Surfaces for sports areas - Synthetic surfaces for outdoor sports areas - Test method for the determination of the resistance to exposure to ultra violet light artificial weathering; German and English version prEN 14836:2017
- DIN EN 61300-2-40:2001 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-40: Tests; Screen testing of attenuation of single-mode tuned angled optical connectors (IEC 61300-2-40:2000); German version EN 61300-2-40:2000
- DIN EN 14562:2006-08 Chemical disinfectants and antiseptics - Quantitative carrier test for the evaluation of fungicidal or yeasticidal activity for instruments used in the medical area - Test method and requirements (phase 2, step 2); German version EN 14562:2006
- DIN EN 16602-70-06:2015 Space product assurance - Particle and UV radiation testing for space materials; English version EN 16602-70-06:2014
- DIN EN 17122:2020-02 Chemical disinfectants and antiseptics - Quantitative non-porous surface test for the evaluation of virucidal activity of chemical disinfectants and antiseptics used in the veterinary area - Test method and requirements - Phase 2, step 2; German versio...
- DIN EN 14187-8:2003 Cold applied joint sealants - Part 8: Test method for the determination of the artificial weathering by UV-irradiation; German version EN 14187-8:2003
- DIN EN 14897:2007-09 Water conditioning equipment inside buildings - Devices using mercury low-pressure ultraviolet radiators - Requirements for performance, safety and testing; German version EN 14897:2006+A1:2007
- DIN EN 17122/A1:2023-03 Chemical disinfectants and antiseptics - Quantitative non-porous surface test for the evaluation of virucidal activity of chemical disinfectants and antiseptics used in the veterinary area - Test method and requirements - Phase 2, step 2; German and En...
ES-UNE, Steps of UV testing
- UNE-EN 12791:2016+A1:2018 Chemical disinfectants and antiseptics - Surgical hand disinfection - Test method and requirements (phase 2, step 2)
- UNE-EN 16602-70-06:2014 Space product assurance - Particle and UV radiation testing for space materials (Endorsed by AENOR in November of 2014.)
- UNE-EN 17422:2023 Chemical disinfectants and antiseptics - Quantitative surface test for the evaluation of teat disinfectants used in the veterinary area - Test method and requirements (phase 2 step 2)
- UNE-EN 17111:2019 Chemical disinfectants and antiseptics - Quantitative carrier test for the evaluation of virucidal activity for instruments used in the medical area - Test method and requirements (phase 2, step 2)
- UNE-EN 14562:2007 Chemical disinfectants and antiseptics - Quantitative carrier test for the evaluation of fungicidal or yeasticidal activity for instruments used in the medical area - Test method and requirements (phase 2, step 2)
- UNE-EN 16777:2019 Chemical disinfectants and antiseptics - Quantitative non-porous surface test without mechanical action for the evaluation of virucidal activity of chemical disinfectants used in the medical area - Test method and requirements (phase 2/step 2)
- UNE-EN 14563:2009 Chemical disinfectants and antiseptics - Quantitative carrier test for the evaluation of mycobactericidal or tuberculocidal activity of chemical disinfectants used for instruments in the medical area - Test method and requirements (phase 2, step 2)
Danish Standards Foundation, Steps of UV testing
- DS/EN 61345:1999 UV test for photovoltaic (PV) modules
- DS/EN 13101:2003 Steps for underground man entry chambers - Requirements, marking, testing and evaluation of confirmity
- DS/EN 13758-1+A1:2007 Textiles - Solar UV protective properties - Part 1: Method of test for apparel fabrics
- DS/EN 14187-8:2003 Cold applied joint sealants - Part 8: Test method for the determination of the artificial weathering by UV-irradiation
AENOR, Steps of UV testing
ES-AENOR, Steps of UV testing
- UNE 53-522-1991 Rubber test mixes. Preparation, mixing and vulcanizatoin. Equipment and procedures
Association Francaise de Normalisation, Steps of UV testing
- NF EN 12791/IN1:2017 Antiseptiques et désinfectants chimiques - Désinfection chirurgicale des mains - Méthodes d'essai et prescriptions (phase 2/étape 2)
- NF EN 12791+A1:2017 Antiseptiques et désinfectants chimiques - Désinfection chirurgicale des mains - Méthodes d'essai et prescriptions (phase 2/étape 2)
- NF X42-101:1987 BIOTECHNOLOGY. PROCEDURE FOR TESTING THE CAPABILITY FOR A FERMENTATION PLANT OPERATING UNDER STERILE CONDITIONS.
- NF L90-200-70-06*NF EN 16602-70-06:2015 Space product assurance - Particle and UV radiation testing for space materials
- NF ISO 10677:2011 Céramiques techniques - Sources lumineuses UV destinée aux essais des matériaux photocatalytiques semi-conducteurs
- NF EN 16602-70-06:2015 Assurance produit des projets spatiaux - Essais d'irradiation et aux ultraviolets pour matériaux d'un projet spatial
- NF T75-613*NF EN ISO 24442:2012 Cosmetics - Sun protection test methods - In vivo determination of sunscreen UVA protection.
- NF EN 17422:2022 Antiseptiques et désinfectants chimiques - Essai quantitatif de surface pour l'évaluation des désinfectants de trayons utilisés dans le domaine vétérinaire - Méthode d'essai et prescriptions (phase 2, étape 2)
- NF EN 14187-8:2017 Mastics pour joints appliqués à froid - Méthodes d'essai - Partie 8 : détermination du vieillissement artificiel par rayonnement UV
- NF C93-903-3:2005 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-3 : examinations and measurements - Active monitoring of changes in attenuation and return loss.
- NF EN 13758-1/IN1:2007 Textiles - Propriétés de protection contre le rayonnement UV solaire - Partie 1 : méthode d'essai pour étoffes destinées à l'habillement
- NF EN 13758-1+A1:2007 Textiles - Propriétés de protection contre le rayonnement UV solaire - Partie 1 : méthode d'essai pour étoffes destinées à l'habillement
- NF EN 14562:2006 Désinfectants et antiseptiques chimiques - Essai quantitatif de porte germe pour l'évaluation de l'activité fongicide ou levuricide pour instruments utilisés en médecine humaine - Méthode d'essai et prescriptions (phase 2, étape 2)
- NF B44-103*NF ISO 10677:2011 Fine ceramics (advanced ceramics, advanced technical ceramics) - Ultraviolet light source for testing semiconducting photocatalytic materials
- FD CEN/TR 15046:2005 Produits de préservation du bois - Exposition artificielle aux intempéries des bois traités avant essais biologiques - Epreuves de rayonnement UV et de pulvérisation d'eau
- NF P98-897-8:2003 Cold applied joint sealants - Part 8 : test method for the determination of the artificial weathering by UV-irradiation.
- NF P41-605/IN1*NF EN 14897/IN1:2007 Water conditioning equipment inside buildings - Devices using mercury low-pressure ultraviolet radiators - Requirements for performance, safety and testing
- NF P41-605*NF EN 14897+A1:2007 Water conditioning equipment inside buildings - Devices using mercury low-pressure ultraviolet radiators - Requirements for performance, safety and testing
- NF EN 14897+A1:2007 Appareils de traitement d'eau à l'intérieur des bâtiments - Dispositifs utilisant des radiateurs à mercure et basse pression de rayonnement UV - Exigences de performance, de sécurité et essais
- NF EN 14897/IN1:2007 Appareils de traitement d'eau à l'intérieur des bâtiments - Dispositifs utilisant des radiateurs à mercure et basse pression de rayonnement UV - Exigences de performance, de sécurité et essais
Lithuanian Standards Office , Steps of UV testing
- LST EN 13101-2003 Steps for underground man entry chambers - Requirements, marking, testing and evaluation of conformity
- LST EN 61345-2001 UV test for photovoltaic (PV) modules (IEC 61345:1998)
- LST EN 13758-1+A1-2007 Textiles - Solar UV protective properties - Part 1: Method of test for apparel fabrics
- LST EN 14187-8-2004 Cold applied joint sealants - Part 8: Test method for the determination of the artificial weathering by UV-irradiation
International Telecommunication Union (ITU), Steps of UV testing
American Society for Testing and Materials (ASTM), Steps of UV testing
- ASTM E2193-04 Standard Test Method for Ultraviolet Transmittance of Monoethylene Glycol (Ultraviolet Spectrophotometric Method)
- ASTM E2193-02a Standard Test Method for Ultraviolet Transmittance of Monoethylene Glycol (Ultraviolet Spectrophotometric Method)
- ASTM E2193-02 Standard Test Method for Ultraviolet Transmittance of Monoethylene Glycol (Ultraviolet Spectrophotometric Method)
- ASTM E2193-08 Standard Test Method for Ultraviolet Transmittance of Monoethylene Glycol (Ultraviolet Spectrophotometric Method)
- ASTM D2008-12(2018) Standard Test Method for Ultraviolet Absorbance and Absorptivity of Petroleum Products
- ASTM D6544-11 Standard Practice for Preparation of Textiles Prior to Ultraviolet (UV) Transmission Testing
- ASTM D7183-16 Standard Test Method for Determination of Total Sulfur in Aromatic Hydrocarbons and Related Chemicals by Ultraviolet Fluorescence
- ASTM D1840-22 Standard Test Method for Naphthalene Hydrocarbons in Aviation Turbine Fuels by Ultraviolet Spectrophotometry
- ASTM G180-04 Standard Test Method for Initial Screening of Corrosion Inhibiting Admixtures for Steel in Concrete
- ASTM D7183-12 Standard Test Method for Determination of Total Sulfur in Aromatic Hydrocarbons and Related Chemicals by Ultraviolet Fluorescence
- ASTM D7183-23 Standard Test Method for Determination of Total Sulfur in Aromatic Hydrocarbons and Related Chemicals by Ultraviolet Fluorescence
- ASTM D5156-02(2016) Standard Test Methods for Continuous Measurement of Ozone in Ambient, Workplace, and Indoor Atmospheres (Ultraviolet Absorption)
- ASTM D7183-18 Standard Test Method for Determination of Total Sulfur in Aromatic Hydrocarbons and Related Chemicals by Ultraviolet Fluorescence
- ASTM D1840-03 Standard Test Method for Naphthalene Hydrocarbons in Aviation Turbine Fuels by Ultraviolet Spectrophotometry
- ASTM D1840-01 Standard Test Method for Naphthalene Hydrocarbons in Aviation Turbine Fuels by Ultraviolet Spectrophotometry
- ASTM D1840-96 Standard Test Method for Naphthalene Hydrocarbons in Aviation Turbine Fuels by Ultraviolet Spectrophotometry
- ASTM D1840-02 Standard Test Method for Naphthalene Hydrocarbons in Aviation Turbine Fuels by Ultraviolet Spectrophotometry
- ASTM D7183-07e1 Standard Test Method for Determination of Total Sulfur in Aromatic Hydrocarbons and Related Chemicals by Ultraviolet Fluorescence
- ASTM D7183-07 Standard Test Method for Determination of Total Sulfur in Aromatic Hydrocarbons and Related Chemicals by Ultraviolet Fluorescence
- ASTM D1768-89(2003) Standard Test Method for Sodium Alkylbenzene Sulfonate in Synthetic Detergents by Ultraviolet Absorption
- ASTM D7183-18a(2023) Standard Test Method for Determination of Total Sulfur in Aromatic Hydrocarbons and Related Chemicals by Ultraviolet Fluorescence
- ASTM D7183-18a Standard Test Method for Determination of Total Sulfur in Aromatic Hydrocarbons and Related Chemicals by Ultraviolet Fluorescence
- ASTM D1017-51(1978)e1 Test Method for Benzene and Toluene in 250F and Lighter Petroleum Products by Ultraviolet Spectrophotometry
- ASTM D7183-15 Standard Test Method for Determination of Total Sulfur in Aromatic Hydrocarbons and Related Chemicals by Ultraviolet Fluorescence
- ASTM D7183-18ae1 Standard Test Method for Determination of Total Sulfur in Aromatic Hydrocarbons and Related Chemicals by Ultraviolet Fluorescence
- ASTM D1840-07 Standard Test Method for Naphthalene Hydrocarbons in Aviation Turbine Fuels by Ultraviolet Spectrophotometry
- ASTM D1840-07(2013) Standard Test Method for Naphthalene Hydrocarbons in Aviation Turbine Fuels by Ultraviolet Spectrophotometry
- ASTM D5453-03 Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Motor Fuels and Oils by Ultraviolet Fluorescence
- ASTM D5453-03a Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Motor Fuels and Oils by Ultraviolet Fluorescence
- ASTM D4839-03(2017) Standard Test Method for Total Carbon and Organic Carbon in Water by Ultraviolet, or Persulfate Oxidation, or Both, and Infrared Detection
- ASTM D3658-90(1995) Standard Test Method for Determining the Torque Strength of Ultraviolet (UV) Light-Cured Glass/Metal Adhesive Joints
- ASTM D3658-01(2008) Standard Test Method for Determining the Torque Strength of Ultraviolet (UV) Light-Cured Glass/Metal Adhesive Joints
- ASTM D5453-05 Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Motor Fuels and Oils by Ultraviolet Fluorescence
- ASTM D3658-01(2016) Standard Test Method for Determining the Torque Strength of Ultraviolet (UV) Light-Cured Glass/Metal Adhesive Joints
- ASTM D7238-06(2017) Standard Test Method for Effect of Exposure of Unreinforced Polyolefin Geomembrane Using Fluorescent UV Condensation Apparatus
- ASTM D7238-20 Standard Test Method for Effect of Exposure of Unreinforced Polyolefin Geomembrane Using Fluorescent UV Condensation Apparatus
- ASTM D7511-12(2017)e1 Standard Test Method for Total Cyanide by Segmented Flow Injection Analysis, In-Line Ultraviolet Digestion and Amperometric Detection
- ASTM D7511-09e1 Standard Test Method for Total Cyanide by Segmented Flow Injection Analysis, In-Line Ultraviolet Digestion and Amperometric Detection
- ASTM D7511-09 Standard Test Method for Total Cyanide by Segmented Flow Injection Analysis, In-Line Ultraviolet Digestion and Amperometric Detection
- ASTM D5453-00 Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Motor Fuels and Oils by Ultraviolet Fluorescence
- ASTM D5453-00e1 Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Motor Fuels and Oils by Ultraviolet Fluorescence
- ASTM D7620-10(2020) Standard Test Method for Determination of Total Sulfur in Liquid Hydrocarbon Based Fuels by Continuous Injection, Air Oxidation and Ultraviolet Fluorescence Detection
- ASTM D8234-19 Standard Test Method for Anions in High Ionic Water by Ion Chromatography using Tandem Suppressed Conductivity and UV Detection
- ASTM E878-12 Standard Test Method for Determination of Titanium in Iron Ores and Related Materials by Diantipyrylmethane Ultraviolet Spectrophotometry
- ASTM D5453-04 Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Motor Fuels and Oils by Ultraviolet Fluorescence
- ASTM D6667-04(2010) Standard Test Method for Determination of Total Volatile Sulfur in Gaseous Hydrocarbons and Liquefied Petroleum Gases by Ultraviolet Fluorescence
- ASTM D5156-22 Standard Test Methods for Continuous Measurement of Ozone in Ambient, Workplace, and Indoor Atmospheres (Ultraviolet Absorption)
- ASTM D3658-01 Standard Test Method for Determining the Torque Strength of Ultraviolet (UV) Light-Cured Glass/Metal Adhesive Joints
- ASTM D6667-21 Standard Test Method for Determination of Total Volatile Sulfur in Gaseous Hydrocarbons and Liquefied Petroleum Gases by Ultraviolet Fluorescence
- ASTM D6667-01 Standard Test Method for Determination of Total Volatile Sulfur in Gaseous Hydrocarbons and Liquefied Petroleum Gases by Ultraviolet Fluorescence
- ASTM D6667-10 Standard Test Method for Determination of Total Volatile Sulfur in Gaseous Hydrocarbons and Liquefied Petroleum Gases by Ultraviolet Fluorescence
- ASTM D6667-14(2019) Standard Test Method for Determination of Total Volatile Sulfur in Gaseous Hydrocarbons and Liquefied Petroleum Gases by Ultraviolet Fluorescence
- ASTM D6667-04 Standard Test Method for Determination of Total Volatile Sulfur in Gaseous Hydrocarbons and Liquefied Petroleum Gases by Ultraviolet Fluorescence
- ASTM D6667-14 Standard Test Method for Determination of Total Volatile Sulfur in Gaseous Hydrocarbons and Liquefied Petroleum Gases by Ultraviolet Fluorescence
- ASTM D5156-02 Standard Test Methods for Continuous Measurement of Ozone in Ambient, Workplace, and Indoor Atmospheres (Ultraviolet Absorption)
- ASTM D7238-06(2012) Standard Test Method for Effect of Exposure of Unreinforced Polyolefin Geomembrane Using Fluorescent UV Condensation Apparatus
- ASTM C718-93 Standard Test Method for Ultraviolet (UV)-Cold Box Exposure of One-Part, Elastomeric, Solvent-Release Type Sealants (Withdrawn 2002)
- ASTM D5904-02(2017) Standard Test Method for Total Carbon, Inorganic Carbon, and Organic Carbon in Water by Ultraviolet, Persulfate Oxidation, and Membrane Conductivity Detection
- ASTM D7620-10 Standard Test Method for Determination of Total Sulfur in Liquid Hydrocarbon Based Fuels by Continuous Injection, Air Oxidation and Ultraviolet Fluorescence Detection
- ASTM D7511-09e2 Standard Test Method for Total Cyanide by Segmented Flow Injection Analysis, In-Line Ultraviolet Digestion and Amperometric Detection
- ASTM D7511-12 Standard Test Method for Total Cyanide by Segmented Flow Injection Analysis, In-Line Ultraviolet Digestion and Amperometric Detection
- ASTM D5997-15 Standard Test Method for On-Line Monitoring of Total Carbon, Inorganic Carbon in Water by Ultraviolet, Persulfate Oxidation, and Membrane Conductivity Detection
- ASTM D4839-03(2011) Standard Test Method for Total Carbon and Organic Carbon in Water by Ultraviolet, or Persulfate Oxidation, or Both, and Infrared Detection
- ASTM D6625-13(2020) Standard Practice for Conducting a Test of Protective Properties of Polish Applied to a Painted Panel Using Fluorescent UV-Condensation Light- and Water-Exposure Apparatus
- ASTM D6317-98(2009) Standard Test Method for Low Level Determination of Total Carbon, Inorganic Carbon and Organic Carbon in Water by Ultraviolet, Persulfate Oxidation, and Membrane Conductivity Detection
- ASTM D4587-01 Standard Practice for Fluorescent UV-Condensation Exposures of Paint and Related Coatings
- ASTM D4587-91 Standard Practice for Fluorescent UV-Condensation Exposures of Paint and Related Coatings
- ASTM D4587-11 Standard Practice for Fluorescent UV-Condensation Exposures of Paint and Related Coatings
- ASTM E878-20 Standard Test Method for Determination of Titanium in Iron Ores and Related Materials by Diantipyrylmethane Ultraviolet Spectrophotometry
- ASTM D458-85(1998) Standard practice for testing paints and related coatings and materials using fluorescent ultraviolet exposure devices
- ASTM D7620-10(2015) Standard Test Method for Determination of Total Sulfur in Liquid Hydrocarbon Based Fuels by Continuous Injection, Air Oxidation and Ultraviolet Fluorescence Detection
- ASTM D5997-96(2005) Standard Test Method for On-Line Monitoring of Total Carbon, Inorganic Carbon in Water by Ultraviolet, Persulfate Oxidation, and Membrane Conductivity Detection
- ASTM D5997-96(2009) Standard Test Method for On-Line Monitoring of Total Carbon, Inorganic Carbon in Water by Ultraviolet, Persulfate Oxidation, and Membrane Conductivity Detection
GOSTR, Steps of UV testing
- GOST R 50.04.08-2019 Conformity assessment system for the use of nuclear energy. Сonformity assessment in the form of tests. The procedure
European Committee for Standardization (CEN), Steps of UV testing
- prEN 16637-1-2021 Construction products: Assessment of release of dangerous substances - Part 1: Guidance for the determination of leaching tests and additional testing steps
- EN ISO 787-18:1995 General Methods of Test for Pigments and Extenders - Part 18: Determination of Residue on Sieve - Mechanical Flushing Procedure (ISO 787-18 : 1983)
- CEN EN ISO 6270-2:2005 Paints and varnishes - Determination of resistance to humidity - Part 2: Procedure for exposing test specimens in condensation-water atmospheres
- EN 13697:2015 Chemical disinfectants and antiseptics - Quantitative non-porous surface test for the evaluation of bactericidal and/or fungicidal activity of chemical disinfectants used in food@ industrial@ domestic and institutional areas - Test method and requirements
- EN 16602-70-06:2014 Space product assurance - Particle and UV radiation testing for space materials
- EN ISO 24442:2022 Cosmetics - Sun protection test methods - In vivo determination of sunscreen UVA protection (ISO 24442:2022)
- EN ISO 24442:2011 Cosmetics - Sun protection test methods - In vivo determination of sunscreen UVA protection (ISO 24442:2011)
- EN 14187-8:2017 Cold applied joint sealants - Test methods - Part 8: Determination of the artificial weathering by UV-irradiation
- EN 14675:2015 Chemical disinfectants and antiseptics - Quantitative suspension test for the evaluation of virucidal activity of chemical disinfectants and antiseptics used in the veterinary area - Test method and requirements (Phase 2@ step 1)
- EN 14897:2006+A1:2007 Water conditioning equipment inside buildings - Devices using mercury low-pressure ultraviolet radiators - Requirements for performance, safety and testing
- EN ISO 11985:1997 Ophthalmic Optics - Contact Lenses - Ageing by Exposure to UV and Visible Radiation (in Vitro Method) ISO 11985:1997
- EN 14187-8:2003 Cold applied joint sealants - Part 8: Test method for the determination of the artificial weathering by UV-irradiation
- prEN 2155-4-1980 Aerospace series; test methods for transparent materials for aircraft glazing; part 4: determination of ultra-violet radiation transmission at 290 to 330 nm
CEN - European Committee for Standardization, Steps of UV testing
- PD CEN/TS 16637-1:2018 Tracked Changes. Construction products. Assessment of release of dangerous substances. Guidance for the determination of leaching tests and additional testing steps
国家市场监督管理总局、中国国家标准化管理委员会, Steps of UV testing
- GB/T 14571.4-2022 Test method of ethylene glycol for industrial use—Part 4：Determination of ultraviolet transmittance—Ultraviolet spectrophotometric method
- GB/T 37131-2018 Nanotechnologies—Test method of semiconductor nanopowder using UV-Vis diffuse reflectance spectroscopy
- GB/T 6324.10-2020 Test method of organic chemical products—Part 10: Determination of trace sulfur in organic liquid products—Ultraviolet fluorescence method
SE-SIS, Steps of UV testing
Professional Standard - Environmental Protection, Steps of UV testing
- HJ 970-2018 Water Quality Determination of Petroleum by UV Spectrophotometry (Trial)
- HJ/T 346-2007 Water quality. Determination of nitrate-nitrogen. Ultraviolet spectrophotometry
ZA-SANS, Steps of UV testing
- SANS 6320:2003 Textiles - Solar UV protective properties - Method of test for apparel fabrics
ECSS - European Cooperation for Space Standardization, Steps of UV testing
- Q-ST-70-06C-2008 Particle and UV radiation testing for space materials (First Issue)
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Steps of UV testing
- GB/T 17651.2-1998 Measurement of smoke density of cables burning under defined conditions. Part 2: Test procedure and requirements
PL-PKN, Steps of UV testing
- PN P04990-1989 Methods of chemical tests Knitted medical articles Determination of ultraviolet radiation absorbance
- PN Z04171-02-1986 Air purity protection ests for picric acid etermination of picric acid n work places by UV pectrophotometry absorption
- PN Z04169-02-1986 Air purity.protection Tests for 4,6-dinitroorthocreso! Determination of 4,6-dinitroorthocresol in work places by UV spectrophotometry absorption
Group Standards of the People's Republic of China, Steps of UV testing
- T/ZSA 39-2020 Characterization of Graphene - Work function - Ultraviolet photoelectron spectroscopy (UPS) method
- T/ZGIA 002-2020 Graphene Test Methods Determination of Work Function Ultraviolet Photoelectron Spectroscopy
- T/SHRH 044-2022 Testing method for repairing and relieving efficacies of cosmetics based on UV induced skin erythema model
ECIA - Electronic Components Industry Association, Steps of UV testing
- EIA-364-49-2013 TP-49 Ultraviolet Radiation Test Procedure for Electrical Connectors and Sockets
IN-BIS, Steps of UV testing
RU-GOST R, Steps of UV testing
- GOST R ISO 17123-1-2011 State system for ensuring the uniformity of measurements. Optics and optical instruments. Field procedures for testing geodetic and surveying instruments. Part 1. Theory
- GOST R 55031-2012 Public roads and highways. Geosynthetic for road construction. Test method for determination of stability to ultra-violet radiation
International Electrotechnical Commission (IEC), Steps of UV testing
- IEC 61300-3-17:1995 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-17: Examinations and measurements - Endface angle of angle-polished ferrules
- IEC 61300-3-16:1995 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-16: Examinations and measurements - Endface radius of spherically polished ferrules
- IEC 61300-3-2:1995 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-2: Examinations and measurements - Polarization dependence of a single-mode fibre optic device
- IEC 61300-3-3:2003 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-3: Examinations and measurements; Active monitoring of changes in attenuation and return loss
- IEC 61300-3-33:2012 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-33: Examinations and measurements - Withdrawal force from a resilient alignment sleeve using gauge pins
AT-ON, Steps of UV testing
- ONORM M 5873-1-2001 Plants for the disinfection of water using ultraviolet radiation - Requirements and testing - Low pressure mercury lamp plants
International Organization for Standardization (ISO), Steps of UV testing
- ISO 24442:2011 Cosmetics - Sun protection test methods - In vivo determination of sunscreen UVA protection
KR-KS, Steps of UV testing
- KS B ISO 19232-2-2021 Non-destructive testing — Image quality of radiographs —Part 2: Determination of the image quality value using step/hole-type image quality indicators
NZ-SNZ, Steps of UV testing
- AS/NZS 4547.5:2004 Methods of testing wool packs for greasy wool Method 5: Strength of fabric after exposure to ultraviolet radiation
- AS/NZS 1580.483.2:1994 Paints and Related Materials - Methods of Test Method 483.2: Resistance to Artificial Weathering - Fluorescent UV-Condensation Type Instruments
Standard Association of Australia （SAA）, Steps of UV testing
- AS 3558.5:1999 Methods of testing plastics and composite materials sanitary plumbing fixtures - Determination of degradation by ultraviolet light
- AS 1807.23:2000 Cleanrooms, workstations, safety cabinets and pharmaceutical isolators - Methods of test - Determination of intensity of radiation from germicidal ultraviolet lamps
- AS/NZS 4257.7:1994 Plastic roof and wall cladding materials - Methods of test - Determination of colourfastness, light transmission and impact resistance following ultraviolet light exposure
(U.S.) Plastic Pipe Association, Steps of UV testing
- PPI TN-47-2013 POLYETHYLENE RESIN TESTING REQUIREMENTS TO SUPPORT ASTM D2513 UV EXPOSURE LIMITS OF POLYETHYLENE COMPOUND
Military Standard of the People's Republic of China-General Armament Department, Steps of UV testing
- GJB 772.407-1989 Explosives test methods: UV spectrophotometric determination of components of TNT/RDX injected explosives
ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Steps of UV testing
- ASHRAE 185.2-2014 Method of Testing Ultraviolet Lamps for Use in HVAC&R Units or Air Ducts to Inactivate Microorganisms on Irradiated Surfaces
Japanese Industrial Standards Committee (JISC), Steps of UV testing
- JIS K 5600-7-8:1999 Testing methods for paints -- Part 7: Long-period performance of film -- Section 8: Accelerated weathering (Exposure to fluorescent UV lamps)
ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, Steps of UV testing
- PREN 4057-307-2001 Aerospace Series Cable Ties for Harnesses Test Methods Part 307: Resistance to Ultra Violet Radiation (Edition P 1)