ZH

RU

ES

Use of UV testing

Use of UV testing, Total:499 items.

In the international standard classification, Use of UV testing involves: Analytical chemistry, Lamps and related equipment, Radiation measurements, Solar energy engineering, Products of the textile industry, Products of the chemical industry, Organic chemicals, Body care equipment, Fuels, Ceramics, Road vehicles in general, Optics and optical measurements, Water quality, Plastics, Vocabularies, Installations in buildings, Inorganic chemicals, Miscellaneous domestic and commercial equipment, Road engineering, Petroleum products in general, Electrical and electronic testing, Test conditions and procedures in general, Protective equipment, Road vehicle systems, Soil quality. Pedology, Laboratory medicine, Space systems and operations, Paper products, Air quality, Bridge construction, Paints and varnishes, Lubricants, industrial oils and related products, Acoustics and acoustic measurements, Wood-based panels, Medical equipment, Law. Administration, Non-destructive testing, Aids for disabled or handicapped persons, Metalliferous minerals, Clothes, Burners. Boilers, Adhesives, Natural gas, Protection against fire, Elements of buildings, Alarm and warning systems, Fibre optic communications, Metrology and measurement in general, Thermodynamics and temperature measurements, Microbiology, Waxes, bituminous materials and other petroleum products, Components and accessories for telecommunications equipment, Pumps, Surface treatment and coating, Tobacco, tobacco products and related equipment, Semiconductor devices, Materials for aerospace construction, Physics. Chemistry, Equipment for the rubber and plastics industries, Rubber and plastics products, Ergonomics, Geology. Meteorology. Hydrology, Environmental protection, Equipment for entertainment, Protection of and in buildings.


American Society for Testing and Materials (ASTM), Use of UV testing

  • ASTM E2193-23 Standard Test Method for Ultraviolet Transmittance of Monoethylene Glycol (using Ultraviolet Spectrophotometry)
  • ASTM E2193-04 Standard Test Method for Ultraviolet Transmittance of Monoethylene Glycol (Ultraviolet Spectrophotometric Method)
  • ASTM E2193-02a Standard Test Method for Ultraviolet Transmittance of Monoethylene Glycol (Ultraviolet Spectrophotometric Method)
  • ASTM E2193-02 Standard Test Method for Ultraviolet Transmittance of Monoethylene Glycol (Ultraviolet Spectrophotometric Method)
  • ASTM E2193-08 Standard Test Method for Ultraviolet Transmittance of Monoethylene Glycol (Ultraviolet Spectrophotometric Method)
  • ASTM E3006-20 Standard Practice for Ultraviolet Conditioning of Photovoltaic Modules or Mini-Modules Using a Fluorescent Ultraviolet (UV) Lamp Apparatus
  • ASTM E3006-15 Standard Practice for Ultraviolet Conditioning of Photovoltaic Modules or Mini-Modules Using a Fluorescent Ultraviolet (UV) Lamp Apparatus
  • ASTM D7238-06(2017) Standard Test Method for Effect of Exposure of Unreinforced Polyolefin Geomembrane Using Fluorescent UV Condensation Apparatus
  • ASTM D7238-20 Standard Test Method for Effect of Exposure of Unreinforced Polyolefin Geomembrane Using Fluorescent UV Condensation Apparatus
  • ASTM G130-95(2002) Standard Test Method for Calibration of Narrow- and Broad-Band Ultraviolet Radiometers Using a Spectroradiometer
  • ASTM G130-95 Standard Test Method for Calibration of Narrow- and Broad-Band Ultraviolet Radiometers Using a Spectroradiometer
  • ASTM G130-06 Standard Test Method for Calibration of Narrow- and Broad-Band Ultraviolet Radiometers Using a Spectroradiometer
  • ASTM D7238-06(2012) Standard Test Method for Effect of Exposure of Unreinforced Polyolefin Geomembrane Using Fluorescent UV Condensation Apparatus
  • ASTM G130-12 Standard Test Method for Calibration of Narrow- and Broad-Band Ultraviolet Radiometers Using a Spectroradiometer
  • ASTM D4839-03(2011) Standard Test Method for Total Carbon and Organic Carbon in Water by Ultraviolet, or Persulfate Oxidation, or Both, and Infrared Detection
  • ASTM D7183-16 Standard Test Method for Determination of Total Sulfur in Aromatic Hydrocarbons and Related Chemicals by Ultraviolet Fluorescence
  • ASTM D2008-12(2018) Standard Test Method for Ultraviolet Absorbance and Absorptivity of Petroleum Products
  • ASTM D6625-13(2020) Standard Practice for Conducting a Test of Protective Properties of Polish Applied to a Painted Panel Using Fluorescent UV-Condensation Light- and Water-Exposure Apparatus
  • ASTM D4839-94 Standard Test Method for Total Carbon and Organic Carbon in Water by Ultraviolet, or Persulfate Oxidation, or Both, and Infrared Detection
  • ASTM D4839-03 Standard Test Method for Total Carbon and Organic Carbon in Water by Ultraviolet, or Persulfate Oxidation, or Both, and Infrared Detection
  • ASTM D1148-95 Standard Test Method for Rubber Deterioration8212;Heat and Ultraviolet Light Discoloration of Light-Colored Surfaces
  • ASTM E958-93(2005) Standard Practice for Measuring Practical Spectral Bandwidth of Ultraviolet-Visible Spectrophotometers
  • ASTM D5997-96(2000) Standard Test Method for On-Line Monitoring of Total Carbon, Inorganic Carbon in Water by Ultraviolet, Persulfate Oxidation, and Membrane Conductivity Detection
  • ASTM D6544-11 Standard Practice for Preparation of Textiles Prior to Ultraviolet (UV) Transmission Testing
  • ASTM D7183-23 Standard Test Method for Determination of Total Sulfur in Aromatic Hydrocarbons and Related Chemicals by Ultraviolet Fluorescence
  • ASTM D5110-98 Standard Practice for Calibration of Ozone Monitors and Certification of Ozone Transfer Standards Using Ultraviolet Photometry
  • ASTM D5110-98(2004) Standard Practice for Calibration of Ozone Monitors and Certification of Ozone Transfer Standards Using Ultraviolet Photometry
  • ASTM D5110-22 Standard Practice for Calibration of Ozone Monitors and Certification of Ozone Transfer Standards Using Ultraviolet Photometry
  • ASTM D5110-98(2010) Standard Practice for Calibration of Ozone Monitors and Certification of Ozone Transfer Standards Using Ultraviolet Photometry
  • ASTM D5110-22a Standard Practice for Calibration of Ozone Monitors and Certification of Ozone Transfer Standards Using Ultraviolet Photometry
  • ASTM D5110-98(2017) Standard Practice for Calibration of Ozone Monitors and Certification of Ozone Transfer Standards Using Ultraviolet Photometry
  • ASTM D7183-18 Standard Test Method for Determination of Total Sulfur in Aromatic Hydrocarbons and Related Chemicals by Ultraviolet Fluorescence
  • ASTM D1768-89(2003) Standard Test Method for Sodium Alkylbenzene Sulfonate in Synthetic Detergents by Ultraviolet Absorption
  • ASTM D7183-18a(2023) Standard Test Method for Determination of Total Sulfur in Aromatic Hydrocarbons and Related Chemicals by Ultraviolet Fluorescence
  • ASTM D7183-18a Standard Test Method for Determination of Total Sulfur in Aromatic Hydrocarbons and Related Chemicals by Ultraviolet Fluorescence
  • ASTM D7183-15 Standard Test Method for Determination of Total Sulfur in Aromatic Hydrocarbons and Related Chemicals by Ultraviolet Fluorescence
  • ASTM D7183-18ae1 Standard Test Method for Determination of Total Sulfur in Aromatic Hydrocarbons and Related Chemicals by Ultraviolet Fluorescence
  • ASTM D4788-88(2001) Standard Test Method for Detecting Delaminations in Bridge Decks Using Infrared Thermography
  • ASTM D4788-03(2013) Standard Test Method for Detecting Delaminations in Bridge Decks Using Infrared Thermography
  • ASTM D4839-03(2017) Standard Test Method for Total Carbon and Organic Carbon in Water by Ultraviolet, or Persulfate Oxidation, or Both, and Infrared Detection
  • ASTM D4144-94(1999) Standard Test Method for Estimating Package Stability of Coatings for Ultraviolet Curing
  • ASTM D4144-94(2014) Standard Test Method for Estimating Package Stability of Coatings for Ultraviolet Curing
  • ASTM D5453-05 Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Motor Fuels and Oils by Ultraviolet Fluorescence
  • ASTM E1503-97 Standard Test Method for Conducting Outdoor Sound Measurements Using a Digital Statistical Analysis System
  • ASTM D6317-15 Standard Test Method for Low Level Determination of Total Carbon, Inorganic Carbon and Organic Carbon in Water by Ultraviolet, Persulfate Oxidation, and Membrane Conductivity Detection
  • ASTM F3583-22 Standard Test Method for Exoskeleton Use: Beams
  • ASTM G183-15(2023) Standard Practice for Field Use of Pyranometers, Pyrheliometers and UV Radiometers
  • ASTM D5453-00 Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Motor Fuels and Oils by Ultraviolet Fluorescence
  • ASTM D5453-00e1 Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Motor Fuels and Oils by Ultraviolet Fluorescence
  • ASTM E3022-18 Standard Practice for Measurement of Emission Characteristics and Requirements for LED UV-A Lamps Used in Fluorescent Penetrant and Magnetic Particle Testing
  • ASTM UOP987-15 Low Trace Sulfur in Liquid Hydrocarbons by Oxidative Combustion with Ultraviolet Fluorescence Detection
  • ASTM D5453-04 Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Motor Fuels and Oils by Ultraviolet Fluorescence
  • ASTM F3528-21 Standard Test Method for Exoskeleton Use: Gait
  • ASTM F3581-22 Standard Test Method for Exoskeleton Use: Hurdles
  • ASTM F3582-22 Standard Test Method for Exoskeleton Use: Gaps
  • ASTM E878-12 Standard Test Method for Determination of Titanium in Iron Ores and Related Materials by Diantipyrylmethane Ultraviolet Spectrophotometry
  • ASTM D1840-22 Standard Test Method for Naphthalene Hydrocarbons in Aviation Turbine Fuels by Ultraviolet Spectrophotometry
  • ASTM D8234-19 Standard Test Method for Anions in High Ionic Water by Ion Chromatography using Tandem Suppressed Conductivity and UV Detection
  • ASTM D3658-01 Standard Test Method for Determining the Torque Strength of Ultraviolet (UV) Light-Cured Glass/Metal Adhesive Joints
  • ASTM D6667-21 Standard Test Method for Determination of Total Volatile Sulfur in Gaseous Hydrocarbons and Liquefied Petroleum Gases by Ultraviolet Fluorescence
  • ASTM D6667-14(2019) Standard Test Method for Determination of Total Volatile Sulfur in Gaseous Hydrocarbons and Liquefied Petroleum Gases by Ultraviolet Fluorescence
  • ASTM D6667-04 Standard Test Method for Determination of Total Volatile Sulfur in Gaseous Hydrocarbons and Liquefied Petroleum Gases by Ultraviolet Fluorescence
  • ASTM D6667-14 Standard Test Method for Determination of Total Volatile Sulfur in Gaseous Hydrocarbons and Liquefied Petroleum Gases by Ultraviolet Fluorescence
  • ASTM D7183-12 Standard Test Method for Determination of Total Sulfur in Aromatic Hydrocarbons and Related Chemicals by Ultraviolet Fluorescence
  • ASTM D5156-02(2016) Standard Test Methods for Continuous Measurement of Ozone in Ambient, Workplace, and Indoor Atmospheres (Ultraviolet Absorption)
  • ASTM G183-05(2010) Standard Practice for Field Use of Pyranometers, Pyrheliometers and UV Radiometers
  • ASTM D1840-03 Standard Test Method for Naphthalene Hydrocarbons in Aviation Turbine Fuels by Ultraviolet Spectrophotometry
  • ASTM D1840-01 Standard Test Method for Naphthalene Hydrocarbons in Aviation Turbine Fuels by Ultraviolet Spectrophotometry
  • ASTM D1840-96 Standard Test Method for Naphthalene Hydrocarbons in Aviation Turbine Fuels by Ultraviolet Spectrophotometry
  • ASTM D1840-02 Standard Test Method for Naphthalene Hydrocarbons in Aviation Turbine Fuels by Ultraviolet Spectrophotometry
  • ASTM D7183-07e1 Standard Test Method for Determination of Total Sulfur in Aromatic Hydrocarbons and Related Chemicals by Ultraviolet Fluorescence
  • ASTM D7183-07 Standard Test Method for Determination of Total Sulfur in Aromatic Hydrocarbons and Related Chemicals by Ultraviolet Fluorescence
  • ASTM D1017-51(1978)e1 Test Method for Benzene and Toluene in 250F and Lighter Petroleum Products by Ultraviolet Spectrophotometry
  • ASTM D1840-07 Standard Test Method for Naphthalene Hydrocarbons in Aviation Turbine Fuels by Ultraviolet Spectrophotometry
  • ASTM D1840-07(2013) Standard Test Method for Naphthalene Hydrocarbons in Aviation Turbine Fuels by Ultraviolet Spectrophotometry
  • ASTM D5453-03 Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Motor Fuels and Oils by Ultraviolet Fluorescence
  • ASTM D5453-03a Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Motor Fuels and Oils by Ultraviolet Fluorescence
  • ASTM G130-12(2020) Standard Test Method for Calibration of Narrow- and Broad-Band Ultraviolet Radiometers Using a Spectroradiometer
  • ASTM D3658-90(1995) Standard Test Method for Determining the Torque Strength of Ultraviolet (UV) Light-Cured Glass/Metal Adhesive Joints
  • ASTM D3658-01(2008) Standard Test Method for Determining the Torque Strength of Ultraviolet (UV) Light-Cured Glass/Metal Adhesive Joints
  • ASTM F3584-22 Standard Test Method for Exoskeleton Use: Obstacle Avoidance: Walking
  • ASTM D7511-09e2 Standard Test Method for Total Cyanide by Segmented Flow Injection Analysis, In-Line Ultraviolet Digestion and Amperometric Detection
  • ASTM D7511-12 Standard Test Method for Total Cyanide by Segmented Flow Injection Analysis, In-Line Ultraviolet Digestion and Amperometric Detection
  • ASTM E1503-05 Standard Test Method for Conducting Outdoor Sound Measurements Using a Digital Statistical Analysis System
  • ASTM E493/E493M-11(2022) Standard Practice for Leaks Using the Mass Spectrometer Leak Detector in the Inside-Out Testing Mode
  • ASTM E493/E493M-11(2017) Standard Practice for Leaks Using the Mass Spectrometer Leak Detector in the Inside-Out Testing Mode
  • ASTM D3658-01(2016) Standard Test Method for Determining the Torque Strength of Ultraviolet (UV) Light-Cured Glass/Metal Adhesive Joints
  • ASTM D5997-15 Standard Test Method for On-Line Monitoring of Total Carbon, Inorganic Carbon in Water by Ultraviolet, Persulfate Oxidation, and Membrane Conductivity Detection
  • ASTM D4587-01 Standard Practice for Fluorescent UV-Condensation Exposures of Paint and Related Coatings
  • ASTM D4587-91 Standard Practice for Fluorescent UV-Condensation Exposures of Paint and Related Coatings
  • ASTM D4587-11 Standard Practice for Fluorescent UV-Condensation Exposures of Paint and Related Coatings
  • ASTM E878-20 Standard Test Method for Determination of Titanium in Iron Ores and Related Materials by Diantipyrylmethane Ultraviolet Spectrophotometry
  • ASTM D458-85(1998) Standard practice for testing paints and related coatings and materials using fluorescent ultraviolet exposure devices
  • ASTM F3517-21 Standard Practice for Movement Tests When Using an Exoskeleton
  • ASTM D7511-12(2017)e1 Standard Test Method for Total Cyanide by Segmented Flow Injection Analysis, In-Line Ultraviolet Digestion and Amperometric Detection
  • ASTM D7511-09e1 Standard Test Method for Total Cyanide by Segmented Flow Injection Analysis, In-Line Ultraviolet Digestion and Amperometric Detection
  • ASTM D7511-09 Standard Test Method for Total Cyanide by Segmented Flow Injection Analysis, In-Line Ultraviolet Digestion and Amperometric Detection
  • ASTM D7620-10(2015) Standard Test Method for Determination of Total Sulfur in Liquid Hydrocarbon Based Fuels by Continuous Injection, Air Oxidation and Ultraviolet Fluorescence Detection
  • ASTM E1503-06 Standard Test Method for Conducting Outdoor Sound Measurements Using a Digital Statistical Sound Analysis System
  • ASTM E1933-99a Standard Test Methods for Measuring and Compensating for Emissivity Using Infrared Imaging Radiometers
  • ASTM E1933-99a(2005)e1 Standard Test Methods for Measuring and Compensating for Emissivity Using Infrared Imaging Radiometers
  • ASTM E1503-12 Standard Test Method for Conducting Outdoor Sound Measurements Using a Digital Statistical Sound Analysis System
  • ASTM E1503-14 Standard Test Method for Conducting Outdoor Sound Measurements Using a Digital Statistical Sound Analysis System
  • ASTM D5997-96(2005) Standard Test Method for On-Line Monitoring of Total Carbon, Inorganic Carbon in Water by Ultraviolet, Persulfate Oxidation, and Membrane Conductivity Detection
  • ASTM D5997-96(2009) Standard Test Method for On-Line Monitoring of Total Carbon, Inorganic Carbon in Water by Ultraviolet, Persulfate Oxidation, and Membrane Conductivity Detection
  • ASTM E878-01 Standard Test Method for Determination of Titanium in Iron Ores and Related Materials by Diantipyrylmethane Untraviolet Spectrometry
  • ASTM E878-96 Standard Test Method for Determination of Titanium in Iron Ores and Related Materials by Diantipyrylmethane Untraviolet Spectrometry
  • ASTM E878-01(2005) Standard Test Method for Determination of Titanium in Iron Ores and Related Materials by Diantipyrylmethane Ultraviolet Spectrometry
  • ASTM E3179-18 Standard Test Method for Determining Antimicrobial Efficacy of Ultraviolet Germicidal Irradiation against Influenza Virus on Fabric Carriers with Simulated Soil
  • ASTM E878-11 Standard Test Method for Determination of Titanium in Iron Ores and Related Materials by Diantipyrylmethane Ultraviolet Spectrometry
  • ASTM D8496-23 Standard Test Method for Determination of Hydroquinone (HQ) Content in Vinyl Acetate Monomer (VAM) Using Ultraviolet-Visible (UV-Vis) Spectrophotometer
  • ASTM D7551-10(2015) Standard Test Method for Determination of Total Volatile Sulfur in Gaseous Hydrocarbons and Liquefied Petroleum Gases and Natural Gas by Ultraviolet Fluorescence
  • ASTM D7620-10(2020) Standard Test Method for Determination of Total Sulfur in Liquid Hydrocarbon Based Fuels by Continuous Injection, Air Oxidation and Ultraviolet Fluorescence Detection
  • ASTM E3022-15 Standard Practice for Measurement of Emission Characteristics and Requirements for LED UV-A Lamps Used in Fluorescent Penetrant and Magnetic Particle Testing
  • ASTM D6667-04(2010) Standard Test Method for Determination of Total Volatile Sulfur in Gaseous Hydrocarbons and Liquefied Petroleum Gases by Ultraviolet Fluorescence
  • ASTM D5156-22 Standard Test Methods for Continuous Measurement of Ozone in Ambient, Workplace, and Indoor Atmospheres (Ultraviolet Absorption)
  • ASTM E1503-22 Standard Test Method for Conducting Outdoor Sound Measurements Using a Statistical Sound Analysis System
  • ASTM D7238-06 Standard Test Method for Effect of Exposure of Unreinforced Polyolefin Geomembrane Using Fluorescent UV Condensation Apparatus
  • ASTM D1768-89(2009) Standard Test Method for Sodium Alkylbenzene Sulfonate in Synthetic Detergents by Ultraviolet Absorption
  • ASTM D1768-89(2016) Standard Test Method for Sodium Alkylbenzene Sulfonate in Synthetic Detergents by Ultraviolet Absorption
  • ASTM D8519-23 Standard Test Method for Determination of Hydrocarbon Types in Waste Plastic Process Oil Using Gas Chromatography with Vacuum Ultraviolet Absorption Spectroscopy Detection (GC-VUV)
  • ASTM D6667-01 Standard Test Method for Determination of Total Volatile Sulfur in Gaseous Hydrocarbons and Liquefied Petroleum Gases by Ultraviolet Fluorescence
  • ASTM D6667-10 Standard Test Method for Determination of Total Volatile Sulfur in Gaseous Hydrocarbons and Liquefied Petroleum Gases by Ultraviolet Fluorescence
  • ASTM D6556-14 Standard Test Method for Carbon Blackmdash;Total and External Surface Area by Nitrogen Adsorption
  • ASTM D7417-17 Standard Test Method for Analysis of In-Service Lubricants Using Particular Four-Part Integrated Tester (Atomic Emission Spectroscopy, Infrared Spectroscopy, Viscosity, and Laser Particle Counter)
  • ASTM D5156-02 Standard Test Methods for Continuous Measurement of Ozone in Ambient, Workplace, and Indoor Atmospheres (Ultraviolet Absorption)
  • ASTM C718-93 Standard Test Method for Ultraviolet (UV)-Cold Box Exposure of One-Part, Elastomeric, Solvent-Release Type Sealants (Withdrawn 2002)
  • ASTM D7551-10 Standard Test Method for Determination of Total Volatile Sulfur in Gaseous Hydrocarbons and Liquefied Petroleum Gases and Natural Gas by Ultraviolet Fluorescence
  • ASTM F1249-94b Standard Test Method for Water Vapor Transmission Rate Through Plastic Film and Sheeting Using a Modulated Infrared Sensor
  • ASTM F1249-20 Standard Test Method for Water Vapor Transmission Rate Through Plastic Film and Sheeting Using a Modulated Infrared Sensor
  • ASTM D5904-96 Standard Test Method for Total Carbon, Inorganic Carbon, and Organic Carbon in Water by Ultraviolet, Persulfate Oxidation, and Membrane Conductivity Detection
  • ASTM D5904-02 Standard Test Method for Total Carbon, Inorganic Carbon, and Organic Carbon in Water by Ultraviolet, Persulfate Oxidation, and Membrane Conductivity Detection
  • ASTM D5904-02(2009) Standard Test Method for Total Carbon, Inorganic Carbon, and Organic Carbon in Water by Ultraviolet, Persulfate Oxidation, and Membrane Conductivity Detection
  • ASTM F3523-21 Standard Test Method for Exoskeleton Use: Confined Space: Horizontal Movement
  • ASTM D5904-02(2017) Standard Test Method for Total Carbon, Inorganic Carbon, and Organic Carbon in Water by Ultraviolet, Persulfate Oxidation, and Membrane Conductivity Detection
  • ASTM F3313-18 Standard Test Method for Determining Impact Attenuation of Playground Surfaces Within the Use Zone of Playground Equipment as Tested in the Field
  • ASTM F3313-19 Standard Test Method for Determining Impact Attenuation of Playground Surfaces Within the Use Zone of Playground Equipment as Tested in the Field
  • ASTM F3313-20 Standard Test Method for Determining Impact Attenuation of Playground Surfaces Within the Use Zone of Playground Equipment as Tested in the Field
  • ASTM E2758-15a(2021) Standard Guide for Selection and Use of Wideband, Low Temperature Infrared Thermometers
  • ASTM E2758-15 Standard Guide for Selection and Use of Wideband, Low Temperature Infrared Thermometers
  • ASTM E2758-10 Standard Guide for Selection and Use of Wideband, Low Temperature Infrared Thermometers
  • ASTM E2321-03 Standard Practice for Use of Test Methods E 96 for Determining the Water Vapor Transmission (WVT) of Exterior Insulation and Finish Systems (EIFS)
  • ASTM D7620-10 Standard Test Method for Determination of Total Sulfur in Liquid Hydrocarbon Based Fuels by Continuous Injection, Air Oxidation and Ultraviolet Fluorescence Detection
  • ASTM D6587-12 Standard Test Method for Yarn Number Using Automatic Tester
  • ASTM D6587-12(2018) Standard Test Method for Yarn Number Using Automatic Tester
  • ASTM D6994-10 Standard Test Method for Determination of Metal Cyanide Complexes in Wastewater, Surface Water, Groundwater and Drinking Water Using Anion Exchange Chromatography with UV Detection

German Institute for Standardization, Use of UV testing

  • DIN 19294-1:2020-08 Devices for the disinfection of water using ultraviolet radiation - Part 1: Devices equipped with UV low pressure lamps - Requirements and testing / Note: This standard is part of the DVGW body of rules.
  • DIN 19294-1:2020 Devices for the disinfection of water using ultraviolet radiation - Part 1: Devices equipped with UV low pressure lamps - Requirements and testing
  • DIN ISO 11264:2005-11 Soil quality - Determination of herbicides - Method using HPLC with UV-detection (ISO 11264:2005)
  • DIN 19294-3:2020-08 Devices for the disinfection of water using ultraviolet radiation - Part 3: Reference radiometers for devices equipped with UV low pressure lamps - Requirements and testing / Note: This standard is part of the DVGW body of rules.
  • DIN 19294-3:2020 Devices for the disinfection of water using ultraviolet radiation - Part 3: Reference radiometers for devices equipped with UV low pressure lamps - Requirements and testing
  • DIN EN 14897:2007-09 Water conditioning equipment inside buildings - Devices using mercury low-pressure ultraviolet radiators - Requirements for performance, safety and testing; German version EN 14897:2006+A1:2007
  • DIN EN 14176:2017-03 Foodstuffs - Determination of domoic acid in raw shellfish, raw finfish and cooked mussels by RP-HPLC using UV detection; German version EN 14176:2017
  • DIN EN IEC 61228:2021-05 Fluorescent ultraviolet lamps used for tanning - Measurement and specification method (IEC 61228:2020); German version EN IEC 61228:2020 / Note: DIN EN 61228 (2008-08) remains valid alongside this standard until 2023-12-09.
  • DIN EN ISO 22478:2006-07 Water quality - Determination of certain explosives and related compounds - Method using high-performance liquid chromatography (HPLC) with UV detection (ISO 22478:2006); German version EN ISO 22478:2006
  • DIN 47609:1989-07 Cable distribution cabinets from plastic for outdoor use; requirements, tests / Note: To be replaced by DIN 47609 (2013-08).
  • DIN EN 16602-70-06:2015-01 Space product assurance - Particle and UV radiation testing for space materials; English version EN 16602-70-06:2014
  • DIN EN 14897:2007 Water conditioning equipment inside buildings - Devices using mercury low-pressure ultraviolet radiators - Requirements for performance, safety and testing(includes Amendment A1:2007) English version of DIN EN 14897:2007-09
  • DIN EN 14836:2017 Surfaces for sports areas - Synthetic surfaces for outdoor sports areas - Test method for the determination of the resistance to exposure to ultra violet light artificial weathering; German and English version prEN 14836:2017
  • DIN EN ISO 11369:1997-11 Water quality - Determination of selected plant treatment agents - Method using high performance liquid chromatography with UV detection after solid-liquid extraction (ISO 11369:1997); German version EN ISO 11369:1997
  • DIN ISO 11264:2005 Soil quality - Determination of herbicides - Method using HPLC with UV-detection (ISO 11264:2005);English version of DIN ISO 11264:2005
  • DIN EN 14255-4:2007-02 Measurement and assessment of personal exposures to incoherent optical radiation - Part 4: Terminology and quantities used in UV-, visible and IR-exposure measurements; German version EN 14255-4:2006
  • DIN EN 14187-8:2003 Cold applied joint sealants - Part 8: Test method for the determination of the artificial weathering by UV-irradiation; German version EN 14187-8:2003
  • DIN EN 17156:2022-08 Cosmetics - Analytical methods - LC/UV method for the identification and quantitative determination in cosmetic products of the 22 organic UV filters in use in the EU; German version EN 17156:2018
  • DIN ISO 11916-1:2014-11 Soil quality - Determination of selected explosives and related compounds - Part 1: Method using high-performance liquid chromatography (HPLC) with ultraviolet detection (ISO 11916-1:2013)
  • DIN EN 17156:2019 Cosmetics - Analytical methods - LC/UV method for the identification and quantitative determination in cosmetic products of the 22 organic UV filters in use in the EU
  • DIN EN 17156:2022 Cosmetics - Analytical methods - LC/UV method for the identification and quantitative determination in cosmetic products of the 22 organic UV filters in use in the EU
  • DIN EN 13758-1:2007-03 Textiles - Solar UV protective properties - Part 1: Method of test for apparel fabrics; German version EN 13758-1:2001+A1:2006
  • DIN 51639-4:2020 Testing of lubricants - Test methods - Part 4: Determination of vegetable oil content in used diesel motor oils using infrared spectrometry
  • DIN EN 16602-70-06:2015 Space product assurance - Particle and UV radiation testing for space materials; English version EN 16602-70-06:2014
  • DIN EN IEC 61228:2021 Fluorescent ultraviolet lamps used for tanning - Measurement and specification method (IEC 61228:2020); German version EN IEC 61228:2020
  • DIN EN ISO 20227:2017-10 Water quality - Determination of the growth inhibition effects of waste waters, natural waters and chemicals on the duckweed Spirodela polyrhiza - Method using a stock culture independent microbiotest (ISO 20227:2017); German version EN ISO 20227:2017
  • DIN 51453:2004 Testing of lubricants - Determination of oxidation and nitration of used motor oils - Infrared spectrometric method
  • DIN SPEC 52049:2014 Testing of bitumen - Determination of water content of bituminous emulsions - Drying test by infrared dryers
  • DIN ISO 20179:2007 Water quality - Determination of microcystins - Method using solid phase extraction (SPE) and high performance liquid chromatography (HPLC) with ultraviolet (UV) detection (ISO 20179:2005) English version of DIN ISO 20179:2007-10
  • DIN EN 927-6:2018 Paints and varnishes - Coating materials and coating systems for exterior wood - Part 6: Exposure of wood coatings to artificial weathering using fluorescent UV lamps and water
  • DIN EN 14625:2012 Ambient air.Standard method for the measurement of the concentration of ozone by ultraviolet photometry; German version EN 14625:2012
  • DIN V EN 2155-4:1986 Aerospace series, test methods for transparent materials for aircraft glazing; part 4: determination of ultra-violet radiation transmission at 290 to 330 nm

未注明发布机构, Use of UV testing

  • DIN EN 61228:1995 Method for measuring and determining the UV radiation from UV lamps for tanning purposes
  • DIN EN 1267:1999 Valves – Test of flow resistance using water as test fluid

International Electrotechnical Commission (IEC), Use of UV testing

  • IEC 61228:1996 Method of measuring and specitying the UV-radiation of ultraviolet lamps used for sun-tanning
  • IEC 61228:1993 Method of measuring and specifying the UV-radiation of ultraviolet lamps used for sun-tanning
  • IEC 61228/AMD1:1996 Method of measuring and specifying the UV-radiation of ultraviolet lamps used for sun-tanning; Amendment 1
  • IEC 60747-14-11:2021 Semiconductor devices - Part 14-11: Semiconductor sensors - Test method of surface acoustic wave-based integrated sensors for measuring ultraviolet, illumination and temperature

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Use of UV testing

  • GB/T 21096-2007 Method of measuring and specifying the UV-radiation of ultraviolet lamps used for sun-tanning
  • GB/T 14571.4-2008 Ethylene glycol for industrial use.Determination of ultraviolet transmittance.Ultraviolet spectrophotometric method
  • GB/T 30809-2014 UV light sources for testing properties of photocatalytic materials
  • GB/T 12153-1989 Analysis of water used in boiler and cooling system--Determination for mineral oil--Ultraviolet spectrophotometry
  • GB/T 11060.13-2023 Natural gas—Determination of sulfur compound—Part 13:Determination of hydrogen sulfide content by ultraviolet absorption method
  • GB/T 11060.8-2012 Natural gas.Determination of sulfur compound.Part 8:Determination of total sulfur content by ultraviolet fluorescence method
  • GB/T 14422-1993 Analysis of water used in boiler and cooling system. Determination of benzotriazole. Ultraviolet spectrophotometry
  • GB/T 21131-2007 Environmental tobacco smoke.Estimation of its contribuion to respirable suspended particles.Determination of particulate matter by ultraviolet absorbance and by fluorescence
  • GB/T 14423-1993 Analysis of water used in boiler and cooling system. 2-Mercaptobenzothiazole. Ultraviolet spectrophotometry

Korean Agency for Technology and Standards (KATS), Use of UV testing

  • KS C IEC 61228:2001 Method of measuring and specifying the UV-radiation of ultraviolet lamps used for sun-tanning
  • KS C IEC 61228:2013 Method of measuring and specifying the UV-radiation of ultraviolet lamps used for sun-tanning
  • KS C IEC 61345-2002(2017) UV test for photovoltaic(PV) modules
  • KS C IEC 61345-2002(2022) UV test for photovoltaic(PV) modules
  • KS K 0850-2014 Test method for ultraviolet protection rate and ultraviolet protection factor of textiles
  • KS C IEC 61228-2001(2011) Method of measuring and specifying the UV-radiation of ultraviolet lamps used for sun-tanning
  • KS C IEC 61228-A-2014(2019) Method of measuring and specifying the UV-radiation of ultraviolet lamps used for sun-tanning
  • KS K 0850-2019 Test method for ultraviolet protection rate and ultraviolet protection factor of textiles
  • KS M ISO 17198:2021 Dimethyl ether(DME) for fuels — Determination of total sulfur, ultraviolet fluorescence method
  • KS I ISO 11264:2006 Soil quality-Determination of herbicides-Method using HPLC with UV-detection
  • KS I ISO 11264:2016 Soil quality-Determination of herbicides-Method using HPLC with UV-detection
  • KS M 9102-1996(2001) WATER QUALITY-DETERMINATION OF TOTAL MERCURY BY FLAMELESS ATOMIC ABSORPTION SPECTROMETRY(METHOD AFTER PRETREATMENT WITH ULTRAVIOLET RADITION)
  • KS H ISO 15593:2009 Environmental tobacco smoke-Estimation of its contribution to respirable suspended particles-Determination of particulate matter by ultraviolet absorbance and by fluorescence

Military Standard of the People's Republic of China-General Armament Department, Use of UV testing

  • GJB 7361-2011 The measuring methods for parameters of military ultraviolet detectors
  • GJB 772.407-1989 Explosives test methods: UV spectrophotometric determination of components of TNT/RDX injected explosives

Danish Standards Foundation, Use of UV testing

  • DS/EN 61345:1999 UV test for photovoltaic (PV) modules
  • DS/ISO 29441:2010 Water quality - Determination of total nitrogen after UV digestion - Method using flow analysis (CFA and FIA) and spectrometric detection
  • DS/EN IEC 61228:2020 Fluorescent ultraviolet lamps used for tanning – Measurement and specification method
  • DS/ISO 20179:2007 Water quality - Determination of microcystins - Method using solid phase extraction (SPE) and high performance liquid chromatography (HPLC) with ultraviolet (UV) detection
  • DS/EN 170:1993 Personal eye-protection. Ultraviolet filters. Transmittance requirements and recommended use
  • DS/EN 14897+A1:2007 Water conditioning equipment inside buildings - Devices using mercury low-pressure ultraviolet radiators - Requirements for performance, safety and testing
  • DS/EN 14625:2012 Ambient air - Standard method for the measurement of the concentration of ozone by ultraviolet photometry
  • DS/EN 15964:2011 Breath alcohol test devices other than single use devices - Requirements and test methods
  • DS/EN 13758-1+A1:2007 Textiles - Solar UV protective properties - Part 1: Method of test for apparel fabrics
  • DS/EN 14212:2012 Ambient air - Standard method for the measurement of the concentration of sulphur dioxide by ultraviolet fluorescence
  • DS/ISO 11916-1:2013 Soil quality - Determination of selected explosives and related compounds - Part 1: Method using high-performance liquid chromatography (HPLC) with ultraviolet detection
  • DS/EN 927-6:2006 Paints and varnishes – Coating materials and coating systems for exterior wood – Part 6: Exposure of wood coatings to artificial weathering using fluorescent UV lamps and water
  • DS/EN ISO 11369:1998 Water quality - Determination of selected plant treatment agents - Method using high performance liquid chromatography with UV detection after solid-liquid extraction
  • DS/EN 14187-8:2003 Cold applied joint sealants - Part 8: Test method for the determination of the artificial weathering by UV-irradiation
  • DS/EN 14255-4:2007 Measurement and assessment of personal exposures to incoherent optical radiation - Part 4: Terminology and quantities used in UV-, visible and IR-exposure measurements
  • DS/EN ISO 483:2006 Plastics - Small enclosures for conditioning and testing using aqueous solutions to maintain the humidity at a constant value

AENOR, Use of UV testing

  • UNE-EN 61345:1999 UV TEST FOR PHOTOVOLTAIC (PV) MODULES.
  • UNE-EN 61228:2008 Method of measuring and specifying fluorescent ultraviolet lamps used for tanning
  • UNE-EN 14897:2007+A1:2009 Water conditioning equipment inside buildings - Devices using mercury low-pressure ultraviolet radiators - Requirements for performance, safety and testing
  • UNE-EN ISO 11369:1998 WATER QUALITY. DETERMINATION OF SELECTED PLANT TREATMENT AGENTS. METHOD USING HIGH PERFORMANCE LIQUID CHROMATOGRAPHY WITH UV DETECTION AFTER SOLID-LIQUID EXTRACTION. (ISO 11369:1997).
  • UNE-EN 14625:2013 Ambient air - Standard method for the measurement of the concentration of ozone by ultraviolet photometry
  • UNE-EN ISO 22478:2007 Water quality - Determination of certain explosives and related compounds - Method using high-performance liquid chromatography (HPLC) with UV detection (ISO 22478:2006)
  • UNE-EN 15964:2012 Breath alcohol test devices other than single use devices - Requirements and test methods
  • UNE-EN 13758-1:2002+A1:2007 Textiles - Solar UV protective properties - Part 1: Method of test for apparel fabrics
  • UNE-EN 14212:2013 Ambient air - Standard method for the measurement of the concentration of sulphur dioxide by ultraviolet fluorescence
  • UNE-EN 14255-4:2007 Measurement and assessment of personal exposures to incoherent optical radiation - Part 4: Terminology and quantities used in UV-, visible and IR-exposure measurements
  • UNE-EN 927-6:2007 Paints and varnishes - Coating materials and coating systems for exterior wood - Part 6: Exposure of wood coatings to artificial weathering using fluorescent UV lamps and water

British Standards Institution (BSI), Use of UV testing

  • BS EN 61345:1998 UV test for photovoltaic (PV) modules
  • BS ISO 17198:2014 Dimethyl ether (DME) for fuels. Determination of total sulfur, ultraviolet fluorescence method
  • BS 8628:2022 Disinfection using ultraviolet radiation. Methods for quantitative testing of automated ultraviolet disinfection activities by direct illumination. Determination of bactericidal, mycobactericidal, sporicidal, yeasticidal, fungicidal, virucidal…
  • 21/30390982 DC BS 8628. Disinfection using ultraviolet radiation. Methods for quantitative testing of automated ultraviolet disinfection activities by direct illumination. Determination of bactericidal, mycobactericidal, sporicidal, yeasticidal, fungicidal, virucidal...
  • BS EN 14897:2006+A1:2007 Water conditioning equipment inside buildings - Devices using mercury low-pressure ultraviolet radiators - Requirements for performance, safety and testing
  • BS EN 14187-8:2003 Cold applied joint sealants - Test method for the determination of the artificial weathering by UV-irradiation
  • BS EN 170:2003 Personal eye-protection - Ultraviolet filters.Transmittance requirements and recommended use
  • BS ISO 11916-1:2013 Soil quality. Determination of selected explosives and related compounds. Method using high-performance liquid chromatography (HPLC) with ultraviolet detection
  • BS EN 592:2002 Instructions for use for in vitro diagnostic instruments for self-testing
  • BS EN 16602-70-06:2014 Space product assurance. Particle and UV radiation testing for space materials
  • 18/30378895 DC BS EN 61228. Fluorescent ultraviolet lamps used for tanning. Measurement and specification method
  • BS EN 14625:2012 Ambient air. Standard method for the measurement of the concentration of ozone by ultraviolet photometry
  • BS EN ISO 24442:2011 Cosmetics. Sun protection test methods. In vivo determination of sunscreen UVA protection
  • BS EN 17156:2018 Cosmetics. Analytical methods. LC/UV method for the identification and quantitative determination in cosmetic products of the 22 organic UV filters in use in the EU
  • BS EN 14625:2005 Ambient air quality - Standard method for the measurement of the concentration of ozone by ultraviolet photometry
  • PD CEN/TS 17784-1:2022 Organo-mineral fertilizers. Identification of complexing agents.. Method using UV-Vis spectrophotometry and gravimetry
  • BS EN 14212:2012 Ambient air. Standard method for the measurement of the concentration of sulphur dioxide by ultraviolet fluorescence
  • BS EN 14212:2012(2014) Ambient air. Standard method for the measurement of the concentration of sulphur dioxide by ultraviolet fluorescence
  • 23/30468403 DC BS EN IEC 60068-2-87. Environmental Testing - Part 2-87. Tests-Test xx: UV-C Exposure of Materials and Components to Simulate Ultraviolet Germicidal Irradiation or Other Applications
  • BS 6068-2.49:1995 Water quality. Physical, chemical and biochemical methods. Determination of aluminium. Spectrometric method using pyrocatechol violet
  • PD ISO/TS 23459:2021 Nanotechnologies. Assessment of protein secondary structure during an interaction with nanomaterials using ultraviolet circular dichroism
  • BS ISO 10677:2011 Fine ceramics (advanced ceramics, advanced technical ceramics). Ultraviolet light source for testing semiconducting photocatalytic materials
  • BS EN 14212:2005 Ambient air quality - Standard method for the measurement of the concentration of sulphur dioxide by ultraviolet fluorescence
  • 22/30466943 DC BS EN 60794-1-214. Optical fibre cables - Part 1-214. Generic specification. Basic optical cable test procedures. Environmental test methods. Cable UV resistance test, Method F14
  • BS EN 14255-4:2006 Measurement and assessment of personal exposures to incoherent optical radiation - Terminology and quantities used in UV-, visible and IR-exposure measurements
  • BS EN 927-6:2018 Tracked Changes. Paints and varnishes. Coating materials and coating systems for exterior wood. Exposure of wood coatings to artificial weathering using fluorescent UV lamps and water
  • BS ISO 19721:2022 Plastics. Abrasion test method for artificial turfs using combined UV exposure and mechanical wear
  • BS EN ISO 20227:2017 Water quality. Determination of the growth inhibition effects of waste waters, natural waters and chemicals on the duckweed Spirodela polyrhiza. Method using a stock culture independent microbiotest
  • BS EN 927-6:2006 Paints and varnishes - Coating materials and coating systems for exterior wood - Part 6:Exposure of wood coatings to artificial weathering using fluorescent UV lamps and water
  • BS EN 927-6:2008 Paints and varnishes - Coating materials and coating systems for exterior wood - Exposure of wood coatings to artificial weathering using fluorescent UV lamps and water
  • BS EN ISO 11369:1997 Water quality. Determination of selected plant treatment agents. Method using high performance liquid chromatography with UV detection after solid-liquid extraction
  • BS EN 50289-4-17:2015 Tracked Changes. Communication cables. Specifications for test methods. Test methods for UV resistance evaluation of the sheath of electrical and optical fibre cable
  • BS 3900-F19:2000 Methods of test for paint - Durability tests on paint films - Determination of resistance to cyclic corrosion conditions - Wet (salt fog)/dry/humidity/UV light - Part F19: Determination of resistance to cyclic corrosion conditions - Wet (salt fog)/dry/hum
  • BS EN 1971-1:2019 Copper and copper alloys. Eddy current test for measuring defects on seamless round copper and copper alloy tubes - Test with an encircling test coil on the outer surface
  • 16/30287218 DC BS ISO 19021. Test method for determination of gas concentrations in ISO 5659-2 using Fourier transform infrared spectroscopy
  • BS EN 15964:2011 Breath alcohol test devices other than single use devices. Requirements and test methods
  • BS IEC 60747-14-11:2021 Semiconductor devices - Semiconductor sensors. Test method of surface acoustic wave-based integrated sensors for measuring ultraviolet, illumination and temperature
  • 20/30383522 DC BS ISO 19721. Plastics. Abrasion test method for artificial turfs using combined UV exposure and mechanical wear
  • BS EN ISO 13165-2:2022 Water quality. Radium-226 - Test method using emanometry
  • BS EN ISO 13164-3:2020 Water quality. Radon-222 - Test method using emanometry
  • BS EN ISO 13473-5:2009 Characterization of pavement texture by use of surface profiles - Determination of megatexture

RU-GOST R, Use of UV testing

  • GOST ISO 4735-2015 Essential oils of citrus. Determination of CD value by ultraviolet spectrometric analysis
  • GOST 27570.32-1991 Safety of household and similar electrical appliances. Particular requirements for ultra-violet and ultra-red radiation skin treatment appliances for household use and test methods
  • GOST 12.4.126-1983 Occupational safety standards system. Fabrics and materials for welders working. Method for determination of safety and UF-resistance
  • GOST R 55031-2012 Public roads and highways. Geosynthetic for road construction. Test method for determination of stability to ultra-violet radiation
  • GOST R IEC 60335-2-27-2000 Safety of household and similar electrical appliances. Particular requirements for appliances for skin exposure to ultraviolet and infrared radiation and test methods
  • GOST R 56341-2015 Aromatic hydrocarbons and related chemicals. Determination of total sulfur by method of ultraviolet fluorescence
  • GOST R 50777-2014 Passive infeared detectors for using at different condisions. General requirements and test methods
  • GOST R 8.640-2008 State sysem for ensuring the uniformity of measurements. Radiometers of ultraviolet radiation measurements for photolithography technological processes testing. Verification methods
  • GOST R ISO 29701-2015 Nanotechnologies. Nanomaterials for testing in assay systems in vitro. Method for determination of endotoxin using Limulus amebocyte lysate (LAL-test)

Association Francaise de Normalisation, Use of UV testing

  • NF C72-228:1995 Method of measuring and specifying the uv-radiation of ultraviolet lamps used for sun-tanning.
  • NF ISO 10677:2011 Céramiques techniques - Sources lumineuses UV destinée aux essais des matériaux photocatalytiques semi-conducteurs
  • NF M41-020*NF ISO 17198:2015 Dimethyl ether (DME) for fuels - Determination of total sulfur - Ultraviolet fluorescence method
  • NF EN 14897+A1:2007 Appareils de traitement d'eau à l'intérieur des bâtiments - Dispositifs utilisant des radiateurs à mercure et basse pression de rayonnement UV - Exigences de performance, de sécurité et essais
  • NF EN 14897/IN1:2007 Appareils de traitement d'eau à l'intérieur des bâtiments - Dispositifs utilisant des radiateurs à mercure et basse pression de rayonnement UV - Exigences de performance, de sécurité et essais
  • NF EN IEC 61228:2020 Lampes fluorescentes à ultraviolet utilisées pour le bronzage - Méthode de mesure et de spécification
  • NF EN ISO 20846:2019 Produits pétroliers - Détermination de la teneur en soufre des carburants pour automobiles - Méthode par fluorescence ultraviolette
  • NF L90-200-70-06*NF EN 16602-70-06:2015 Space product assurance - Particle and UV radiation testing for space materials
  • NF M07-100:2000 Émulsions eau dans gazole - Dosage du soufre - Méthode par combustion et détection par fluorescence ultraviolette
  • NF EN 16602-70-06:2015 Assurance produit des projets spatiaux - Essais d'irradiation et aux ultraviolets pour matériaux d'un projet spatial
  • NF EN 60335-2-27/A2:2020 Appareils électrodomestiques et analogues - Sécurité - Partie 2-27 : règles particulières pour les appareils d'exposition de la peau aux rayonnements ultraviolets et infrarouges
  • NF EN 60335-2-27:2013 Appareils électrodomestiques et analogues - Sécurité - Partie 2-27 : règles particulières pour les appareils d'exposition de la peau aux rayonnements ultraviolets et infrarouges
  • NF P98-897-8:2003 Cold applied joint sealants - Part 8 : test method for the determination of the artificial weathering by UV-irradiation.
  • NF ISO 11916-1:2013 Qualité du sol - Dosage d'une sélection d'explosifs et de composés apparentés - Partie 1 : méthode utilisant la chromatographie liquide à haute performance (CLHP) avec détection ultraviolet
  • NF B44-103*NF ISO 10677:2011 Fine ceramics (advanced ceramics, advanced technical ceramics) - Ultraviolet light source for testing semiconducting photocatalytic materials
  • NF T75-613*NF EN ISO 24442:2012 Cosmetics - Sun protection test methods - In vivo determination of sunscreen UVA protection.
  • NF EN 14187-8:2017 Mastics pour joints appliqués à froid - Méthodes d'essai - Partie 8 : détermination du vieillissement artificiel par rayonnement UV
  • NF T75-641*NF EN 17156:2018 Cosmetics - Analytical methods - LC/UV method for the identification and quantitative determination in cosmetic products of the 22 organic UV filters in use in the EU
  • NF ISO 17198:2015 DME comme carburants ou combustibles - Détermination de la teneur en soufre total - Méthode par fluorescence ultraviolet
  • NF X43-064*NF EN 14625:2013 Ambient air quality - Standard method for the measurement of the concentration of ozone by ultraviolet photometry
  • NF EN 3475-706:2006 Série aérospatiale - Câbles électriques à usage aéronautique - Méthodes d'essais - Partie 706 : marquabilité laser UV
  • NF P41-605/IN1*NF EN 14897/IN1:2007 Water conditioning equipment inside buildings - Devices using mercury low-pressure ultraviolet radiators - Requirements for performance, safety and testing
  • NF P41-605*NF EN 14897+A1:2007 Water conditioning equipment inside buildings - Devices using mercury low-pressure ultraviolet radiators - Requirements for performance, safety and testing
  • NF X43-019:1983 Atmospheric pollution. Determination of the sulphur dioxide content of the ambient air by means of ultraviolet fluorescence.
  • NF X31-408*NF ISO 11264:2008 Soil quality - Determination of herbicides - Method using HPLC with UV-detection
  • NF EN 17156:2018 Cosmétiques - Méthodes analytiques - Procédé CL/UV pour l'identification et la détermination quantitative des 22 filtres UV organiques utilisés dans les produits cosmétiques au sein de l'UE
  • NF V03-185*NF ISO 20635:2019 Infant formula and adult nutritionals - Determination of vitamin C by (ultra) high performance liquid chromatography with ultraviolet detection ((U)HPLC-UV)
  • NF EN IEC 62788-5-1:2020 Procédures de mesure des matériaux utilisés dans les modules photovoltaïques - Partie 5-1 : joints d'étanchéité périphériques - Méthodes d'essai suggérées pour l'utilisation des matériaux de joints d'étanchéité périphériques
  • NF EN 13758-1/IN1:2007 Textiles - Propriétés de protection contre le rayonnement UV solaire - Partie 1 : méthode d'essai pour étoffes destinées à l'habillement
  • NF EN 13758-1+A1:2007 Textiles - Propriétés de protection contre le rayonnement UV solaire - Partie 1 : méthode d'essai pour étoffes destinées à l'habillement
  • NF T34-201-6:2006 Paints and varnishes - Coating materials and coating systems for exterior wood - Part 6 : exposure of wood coatings to artificial weathering using fluorescent UV lamps and water.
  • NF X43-062*NF EN 14212:2013 Ambient air quality - Standard method for the measurement of the concentration of sulphur dioxide by ultraviolet fluorescence
  • XP P92-021*XP ISO/TS 19021:2019 Test method for determination of gas concentrations in ISO 5659-2 using Fourier transform infrared spectroscopy
  • FD CEN/TR 15046:2005 Produits de préservation du bois - Exposition artificielle aux intempéries des bois traités avant essais biologiques - Epreuves de rayonnement UV et de pulvérisation d'eau
  • NF EN ISO 11369:1997 Qualité de l'eau - Dosage de certains agents de traitement des plantes - Méthode par chromatographie en phase liquide haute performance (CLHP) avec détection UV après extraction solide-liquide
  • NF T34-201-6*NF EN 927-6:2018 Paints and varnishes - Coating materials and coating systems for exterior wood - Part 6 : exposure of wood coatings to artificial weathering using fluorescent UV lamps and water
  • NF X20-703*NF EN 15964:2011 Breath alcohol test devices other than single use devices - Requirements and test methods
  • NF EN 960:2006 Fausses têtes à utiliser lors des essais de casques de protection
  • NF EN 14255-4:2006 Mesurage et évaluation de l'exposition des personnes aux rayonnements optiques incohérents - Partie 4 : terminologie et grandeurs utilisées pour le mesurage de l'exposition au rayonnement ultraviolet, visible et infrarouge
  • NF X90-008-4*NF EN 14255-4:2006 Measurement and assessment of personal exposures to incoherent optical radiation - Part 4 : terminology and quantities used in UV-, visible and IR-exposure measurements

国家市场监督管理总局、中国国家标准化管理委员会, Use of UV testing

  • GB/T 14571.4-2022 Test method of ethylene glycol for industrial use—Part 4:Determination of ultraviolet transmittance—Ultraviolet spectrophotometric method
  • GB/T 37131-2018 Nanotechnologies—Test method of semiconductor nanopowder using UV-Vis diffuse reflectance spectroscopy
  • GB/T 11060.8-2020 Natural gas—Determination of sulfur compounds—Part 8:Determination of total sulfur content by ultraviolet fluorescence method
  • GB/T 6324.10-2020 Test method of organic chemical products—Part 10: Determination of trace sulfur in organic liquid products—Ultraviolet fluorescence method

International Organization for Standardization (ISO), Use of UV testing

  • ISO 17198:2014 Dimethyl ether (DME) for fuels - Determination of total sulfur, ultraviolet fluorescence method
  • ISO 19721:2022 Plastics — Abrasion test method for artificial turfs using combined UV exposure and mechanical wear
  • ISO/CD 20846:2023 Petroleum products — Determination of sulfur content of automotive fuels — Ultraviolet fluorescence method
  • ISO 11264:2005 Soil quality - Determination of herbicides - Method using HPLC with UV-detection
  • ISO 22066:2020 Water quality — Determination of total cyanide — Method using segmented flow injection, in-line ultraviolet digestion analysis by gas diffusion and amperometric detection
  • ISO 24442:2011 Cosmetics - Sun protection test methods - In vivo determination of sunscreen UVA protection
  • ISO/TS 23459:2021 Nanotechnologies - Assessment of protein secondary structure during an interaction with nanomaterials using ultraviolet circular dichroism
  • ISO 20179:2005 Water quality - Determination of microcystins - Method using solid phase extraction (SPE) and high performance liquid chromatography (HPLC) with ultraviolet (UV) detection
  • ISO 29441:2010 Water quality - Determination of total nitrogen after UV digestion - Method using flow analysis (CFA and FIA) and spectrometric detection
  • ISO/TS 19021:2018 Test method for determination of gas concentrations in ISO 5659-2 using Fourier transform infrared spectroscopy
  • ISO 15593:2001 Environmental tobacco smoke - Estimation of its contribution to respirable suspended particles - Determination of particulate matter by ultraviolet absorbance and by fluorescence

Lithuanian Standards Office , Use of UV testing

  • LST EN 61345-2001 UV test for photovoltaic (PV) modules (IEC 61345:1998)
  • LST ISO 10566:1998 Water quality. Determination of aluminium. Spectrometric method using pyrocatechol violet
  • LST EN ISO 11369:2000 Water quality - Determination of selected plant treatment agents - Method using high performance liquid chromatography with UV detection after solid-liquid extraction (ISO 11369:1997)
  • LST EN 14897+A1-2007 Water conditioning equipment inside buildings - Devices using mercury low-pressure ultraviolet radiators - Requirements for performance, safety and testing
  • LST EN 14625-2012 Ambient air - Standard method for the measurement of the concentration of ozone by ultraviolet photometry
  • LST EN ISO 22478:2006 Water quality - Determination of certain explosives and related compounds - Method using high-performance liquid chromatography (HPLC) with UV detection (ISO 22478:2006)
  • LST EN 15964-2011 Breath alcohol test devices other than single use devices - Requirements and test methods
  • LST EN 13758-1+A1-2007 Textiles - Solar UV protective properties - Part 1: Method of test for apparel fabrics
  • LST EN 14212-2012 Ambient air - Standard method for the measurement of the concentration of sulphur dioxide by ultraviolet fluorescence
  • LST EN 14187-8-2004 Cold applied joint sealants - Part 8: Test method for the determination of the artificial weathering by UV-irradiation
  • LST EN 14255-4-2007 Measurement and assessment of personal exposures to incoherent optical radiation - Part 4: Terminology and quantities used in UV-, visible and IR-exposure measurements
  • LST EN 927-6-2006 Paints and varnishes - Coating materials and coating systems for exterior wood - Part 6: Exposure of wood coatings to artificial weathering using fluorescent UV lamps and water

Professional Standard - Electron, Use of UV testing

  • SJ/T 11855-2022 Photovoltaic UV aging test chamber irradiation performance test method

European Committee for Electrotechnical Standardization(CENELEC), Use of UV testing

  • EN 61228:2008 Fluorescent ultraviolet lamps used for tanning - Measurement and specification method

CENELEC - European Committee for Electrotechnical Standardization, Use of UV testing

  • EN 61228:1994 Method of Measuring and Specifying the UV-Radiation of Ultraviolet Lamps Used for Sun-Tanning (Incorporates Amendment A1: 1996)

PL-PKN, Use of UV testing

  • PN P04990-1989 Methods of chemical tests Knitted medical articles Determination of ultraviolet radiation absorbance
  • PN-EN ISO 20846-2020-03 P Petroleum products--Determination of sulfur content of automotive fuels--Ultraviolet fluorescence method (ISO 20846:2019)
  • PN Z04171-02-1986 Air purity protection ests for picric acid etermination of picric acid n work places by UV pectrophotometry absorption
  • PN Z04169-02-1986 Air purity.protection Tests for 4,6-dinitroorthocreso! Determination of 4,6-dinitroorthocresol in work places by UV spectrophotometry absorption

SAE - SAE International, Use of UV testing

  • SAE J2020-1989 Accelerated Exposure of Automotive Exterior Materials Using a Fluorescent UV and Condensation Apparatus
  • SAE J2020-2002 Accelerated Exposure of Automotive Exterior Materials Using a Fluorescent UV and Condensation Apparatus
  • SAE J2020-1995 Accelerated Exposure of Automotive Exterior Materials Using a Fluorescent UV and Condensation Apparatus
  • SAE J2020-2022 Accelerated Exposure of Automotive Exterior Materials Using a Fluorescent UV and Condensation Apparatus
  • SAE J2020-2016 Accelerated Exposure of Automotive Exterior Materials Using a Fluorescent UV and Condensation Apparatus

Society of Automotive Engineers (SAE), Use of UV testing

  • SAE J2020-2003 Accelerated Exposure of Automotive Exterior Materials Using a Fluorescent UV and Condensation Apparatus
  • SAE J2298-2011 Ultraviolet Leak Detection: Procedure for Use of Refrigerant leak Detection Dyes for Service of Mobile Air-Conditioning Systems
  • SAE J2298-1996 Ultraviolet Leak Detection: Procedure for Use of Refrigerant Leak Detection Dyes for Service of Mobile Air-Conditioning Systems

SE-SIS, Use of UV testing

BE-NBN, Use of UV testing

  • NBN S 06-003-1986 Personal eye-protection - U11ravioletfi1 ters -Transmittance requirements and recommended utilisation

Professional Standard - Environmental Protection, Use of UV testing

  • HJ 970-2018 Water Quality Determination of Petroleum by UV Spectrophotometry (Trial)
  • HJ/T 346-2007 Water quality. Determination of nitrate-nitrogen. Ultraviolet spectrophotometry

Standard Association of Australia (SAA), Use of UV testing

  • AS 3753:2001 Recommended practice for chemical analysis by ultraviolet/visible spectrophotometry
  • AS 3558.5:1999 Methods of testing plastics and composite materials sanitary plumbing fixtures - Determination of degradation by ultraviolet light
  • AS 1807.23:2000 Cleanrooms, workstations, safety cabinets and pharmaceutical isolators - Methods of test - Determination of intensity of radiation from germicidal ultraviolet lamps
  • AS/NZS 4257.7:1994 Plastic roof and wall cladding materials - Methods of test - Determination of colourfastness, light transmission and impact resistance following ultraviolet light exposure

International Commission on Illumination (CIE), Use of UV testing

  • CIE 181-2007 HAND PROTECTION BY DISPOSABLE GLOVES AGAINST OCCUPATIONAL UV EXPOSURE

Japanese Industrial Standards Committee (JISC), Use of UV testing

  • JIS R 1709:2007 Light source for test of photocatalytic materials used under ultraviolet
  • JIS K 0400-58-10:1998 Water quality -- Determination of aluminium -- Spectrometric method using pyrocatechol violet
  • JIS K 5600-7-8:1999 Testing methods for paints -- Part 7: Long-period performance of film -- Section 8: Accelerated weathering (Exposure to fluorescent UV lamps)

ZA-SANS, Use of UV testing

  • SANS 6320:2003 Textiles - Solar UV protective properties - Method of test for apparel fabrics

ECSS - European Cooperation for Space Standardization, Use of UV testing

  • Q-ST-70-06C-2008 Particle and UV radiation testing for space materials (First Issue)

(U.S.) Ford Automotive Standards, Use of UV testing

  • FORD SK-M2G9543-A-2002 ADHESION PROMOTER, POLYURETHANE, UV RESISTANT ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD ESA-M4D371-A-2006 POLYPROPYLENE MOLDING COMPOUND ULTRAVIOLET STABILIZED ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD FLTM BI 102-06-2001 DETERMINATION OF NON-VOLATILE CONTENT IN UV CURABLE PAINT
  • FORD ESF-M99J356-A-2012 COATING/SEALER, EPOXY, UV CURABLE, CONFORMAL ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSS-M4D713-A6-2008 THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO) 9 % GLASS FILLED, COLOR PIGMENTED, UV STABILIZED, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSS-M4D982-A-2006 POLYPROPYLENE (PP), 40% GLASS FIBER REINFORCED, COLOR PIGMENTED, UV STABILIZED, EXTERIOR *** TO BE USED WITH FORD WSS-M99P1111-A ***
  • FORD WSS-M4D638-C2-2006 POLYPROPYLENE (PP) MOLDING COMPOUND, COLOR PIGMENTED, LOW GLOSS, UV STABILIZED, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** (Use WSS-M4D638-C)
  • FORD ESF-M99J356-A-2006 COATING/SEALER, EPOXY, UV CURABLE, CONFORMAL ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD ESB-M80J2-A-2005 TOPCOAT, CLEAR, ABRASION RESISTANT, UV CURABLE, TRANSPARENT PLASTIC PARTS ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSS-M4D713-A9-2008 THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO) 12% GLASS FILLED, COLOR PIGMENTED, UV STABILIZED, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSS-M99J291-B1-2008 TAPE WITH CLEARCOAT, URETHANE, PRESSURE SENSITIVE, CHIP RESISTANT, EXTERIOR, HIGH UV FOR HIGH IMPACT AREAS ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSS-M4D713-A5-2006 THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO), 9 % GLASS FILLED, COLOR PIGMENTED, UV STABILIZED, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** (Use WSS-M4D713-A6 AND WSS-M4D713-A8)
  • FORD ESB-M4D570-A2-2006 THERMOPLASTIC POLYOLEFIN ELASTOMER (TPO), EXTRUSION GRADE, EXTERIOR, UV STABILIZED***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on ESB-M4D570-A1; Use WSS-M2D382-B1)
  • FORD WSK-M4D744-A-2011 ACETAL (POM) HOMOPOLYMER, UV STABILIZED MOLDING COMPOUND, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSB-M4D690-A-2011 ABS MOLDING COMPOUND, HIGH HEAT RESISTANT, UV STABILIZED, LOW GLOSS, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSB-M4D638-A-2006 POLYPROPYLENE (PP) MOLDING COMPOUND, COLOR PIGMENTED, LOW GLOSS, UV STABILIZED, INTERIOR***TO BE USED WITH FORD WSS-M99P1111-A*** (Use WSS-M4D638-B)
  • FORD WSS-M4D713-A8-2007 THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO), 5% WOLLASTONITE FILLED, COLOR PIGMENTED, UV STABILIZED, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSS-M21P25-B1-2006 CORROSION PROTECTIVE COATING, ZINC NICKEL ALLOY, CHROMIUM-FREE PASSIVATE, U.V. RESISTANT BLACK SEALER ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD ESB-M4D483-A1-2011 ABS, MEDIUM IMPACT-COLOR PIGMENTED - LOW GLOSS - UV STABILIZED - INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD ESB-M4D570-A1-2006 THERMOPLASTIC POLYOLEFIN ELASTOMER (TPO) ESB-M4D570-A1 INJECTION MOLDING GRADE - EXTERIOR - UV STABILIZED***TO BE USED WITH FOED WSS-M99P1111-A*** (Use WSS-M4D952-A2)
  • FORD SK-M2G9542-A-2003 ADHESIVE, PUR, DIRECT GLAZING, ONE COMPONENT, UV-RESISTANT ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD ESB-M80J4-A-2005 CLEAR TOPCOAT, UV CURABLE, ABRASION RESISTANT, TRANSPARENT ACRYLIC PARTS ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSS-M4D994-A-2004 POLYPROPYLENE (PP) COPOLYMER, 15% GLASS FIBER REINFORCED, COLOR PIGMENTED, UV STABILIZED, BLOW MOLDING COMPOUND, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSS-M4D995-A-2005 THERMOPLASTIC POLYOLEFIN (TEO) MOLDING COMPOUND, COLOR PIGMENTED, UV STABILIZED, FOR HIGH GLOSS (CLASS "B") MOLDED IN-COLOR APPLICATIONS, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSS-M4D871-A5-2006 POLYVINYL CHLORIDE (PVC), FLEXIBLE, 65A DUROMETER HARDNESS, INTERIOR, LOW GLOSS, UV STABILIZED **TO BE USED WITH FORD M99P1111-A***
  • FORD WSS-M4D865-B7-2012 POLYPROPYLENE (PP) 20% LONG GLASS FIBER (9-13 mm) REINFORCED, STRUCTURAL, NON UV-STABLE, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSS-M4D865-B1-2012 POLYPROPYLENE (PP) 40% LONG GLASS FIBER (9-13 mm) REINFORCED, GENERAL PURPOSE, STRUCTURAL, NON UV-STABLE ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSS-M4D961-A2-2006 THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO), COLOR PIGMENTED, UV STABILIZED, HIGH MELT FLOW, FOR MOLDED-IN-COLOR AND PARTIALLY PAINTED APPLICATIONS, EXTERIOR *** TO BE USED WITH FORD WSS-M99P1111-A ***
  • FORD WSS-M4D971-A-2007 THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO), COLOR PIGMENTED, UV STABLILIZED, HIGH MELT FLOW, FOR MOLDED-IN-COLOR APPLICATIONS, EXTERIOR - ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSS-M4D952-A2-2006 THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO), UNFILLED MOLDING COMPOUND, UV STABILIZED, MOLD-IN-COLOR, PARTIALLY PAINTED, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSS-M99J291-B5-2008 TAPE, NON-TOPCOATED, URETHANE, PRESSURE SENSITIVE, CHIP RESISTANCE, NON- VISIBLE APPLICATIONS FOR HIGH IMPACT AREAS ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSS-M3D187-A1-2005 UNSATURATED POLYESTER (UP), 35% GLASS FIBER REINFORCED SHEET MOLDING COMPOUND U.V. STABILIZED ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSS-M4D865-B3-2012 POLYPROPYLENE (PP) 40% LONG GLASS FIBER (9-13 mm) REINFORCED, STRUCTURAL, NON UV-STABLE ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSS-M4D865-B4-2012 POLYPROPYLENE (PP) 30% LONG GLASS FIBER (9-13 mm) REINFORCED, STRUCTURAL, NON UV-STABLE, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD ESF-M99J356-A3-2012 COATING/SEALER, EPOXY, UV CURABLE, CONFORMAL, RED ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSS-M4D961-A1-2006 THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO), COLOR PIGMENTED, UV STABILIZED, HIGH MELT FLOW, FOR MOLDED-IN-COLOR AND PARTIALLY PAINTED APPLICATIONS, EXTERIOR - ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSS-M4D988-A-2006 THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO), COLOR PIGMENTED, UV STABILIZED, LOW CLTE, FOR MOLDED-IN-COLOR APPLICATIONS, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** (Use WSS-M4D492-B1)
  • FORD WSS-M4D991-A-2006 THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO), COLOR PIGMENTED, UV STABILIZED, LOW CLTE, FOR MOLDED IN-COLOR APPLICATIONS, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A*** (Use WSS-M4D492-B1)
  • FORD WSS-M4D713-A7-2007 THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO), 4% GLASS/MINERAL FILLED, COLOR PIGMENTED, UV STABILIZED, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSS-M2G316-B4-2008 ADHESIVE, MOISTURE CURING URETHANE, ONE COMPONENT, PRIMERLESS CLEARCOAT, INCREASED UV-STABILITY ***TO BE USED WITH FORD WSS-M99P1111-A***
  • FORD WSS-M5B280-C4-2007 PRIMER, GLASS, SILANE, ONE STEP INCREASED UV STABILITY ***TO BE USED WITH FORD WSS-M99P1111-A*** (SHOWN ON WSB-M5B280-C)

NL-NEN, Use of UV testing

  • NEN-EN 170-1992 Personal eye-protection. Ultraviolet filters. Transmittance requirements and recommended use

Group Standards of the People's Republic of China, Use of UV testing

  • T/ZSA 39-2020 Characterization of Graphene - Work function - Ultraviolet photoelectron spectroscopy (UPS) method
  • T/ZGIA 002-2020 Graphene Test Methods Determination of Work Function Ultraviolet Photoelectron Spectroscopy
  • T/SHRH 044-2022 Testing method for repairing and relieving efficacies of cosmetics based on UV induced skin erythema model

Electronic Components, Assemblies and Materials Association, Use of UV testing

  • ECA EIA-364-49-2013 TP-49 Ultraviolet Radiation Test Procedure for Electrical Connectors and Sockets
  • ECA EIA-448-21-1989 Method 21 Test Standard for Electromechanical Switches: Environmental Effects of Machine Soldering Using an Infrared System

ECIA - Electronic Components Industry Association, Use of UV testing

  • EIA-364-49-2013 TP-49 Ultraviolet Radiation Test Procedure for Electrical Connectors and Sockets
  • EIA-448-21A-2000 Test Standard for Electromechanical Components - Environmental Effects of Machine Soldering Using an Infrared System

AT-ON, Use of UV testing

  • ONORM M 5873-1-2001 Plants for the disinfection of water using ultraviolet radiation - Requirements and testing - Low pressure mercury lamp plants
  • ONORM ISO 5666 Teil.2:1984 Water quality; determination of total mercury by flameless atomic absorption spectrometry; method after pretreatment with ultraviolett radiation
  • ONORM C 9231-1987 Bitumen emulsions for road application; testing; appearance

ES-UNE, Use of UV testing

  • UNE-EN IEC 61228:2020 Fluorescent ultraviolet lamps used for tanning - Measurement and specification method (Endorsed by Asociación Española de Normalización in February of 2021.)
  • UNE-EN 16602-70-06:2014 Space product assurance - Particle and UV radiation testing for space materials (Endorsed by AENOR in November of 2014.)
  • UNE-EN 17156:2020 Cosmetics - Analytical methods - LC/UV method for the identification and quantitative determination in cosmetic products of the 22 organic UV filters in use in the EU
  • UNE-CEN/TS 17784-1:2022 Organo-mineral fertilizers - Identification of complexing agents - Part 1: Method using UV-Vis spectrophotometry and gravimetry (Endorsed by Asociación Española de Normalización in May of 2022.)
  • UNE-EN ISO 20227:2018 Water quality - Determination of the growth inhibition effects of waste waters, natural waters and chemicals on the duckweed Spirodela polyrhiza - Method using a stock culture independent microbiotest (ISO 20227:2017)

GM North America, Use of UV testing

  • GMP.PP.107-2011 Polypropylene ?High Impact Copolymer, UV Stable, ISO Tests Issue 2; Do Not Use on New Programs; Replaced by GMW16208

KR-KS, Use of UV testing

  • KS M ISO 17198-2021 Dimethyl ether(DME) for fuels — Determination of total sulfur, ultraviolet fluorescence method
  • KS L ISO 10677-2023 Fine ceramics (advanced ceramics, advanced technical ceramics) — Ultraviolet light source for testing semiconducting photocatalytic materials

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Use of UV testing

  • ASHRAE OR-16-C031-2016 Field Study of Energy Use-Related Effects of Ultraviolet Germicidal Irradiation of a Cooling Coil
  • ASHRAE 185.2-2014 Method of Testing Ultraviolet Lamps for Use in HVAC&R Units or Air Ducts to Inactivate Microorganisms on Irradiated Surfaces

GOSTR, Use of UV testing

  • GOST IEC 61228-2019 Fluorescent ultraviolet lamps used for tanning. Method for measurement characteristics and requirements

European Committee for Standardization (CEN), Use of UV testing

  • CENELEC EN 61228-2008 Fluorescent ultraviolet lamps used for tanning - Measurement and specification method (IEC 61228:2008)
  • EN 16602-70-06:2014 Space product assurance - Particle and UV radiation testing for space materials
  • EN 14187-8:2017 Cold applied joint sealants - Test methods - Part 8: Determination of the artificial weathering by UV-irradiation
  • EN 14625:2012 Ambient air - Standard method for the measurement of the concentration of ozone by ultraviolet photometry
  • EN 14187-8:2003 Cold applied joint sealants - Part 8: Test method for the determination of the artificial weathering by UV-irradiation
  • EN ISO 24442:2022 Cosmetics - Sun protection test methods - In vivo determination of sunscreen UVA protection (ISO 24442:2022)
  • EN ISO 24442:2011 Cosmetics - Sun protection test methods - In vivo determination of sunscreen UVA protection (ISO 24442:2011)
  • prEN 14212 Ambient air - Standard method for the measurement of the concentration of sulphur dioxide by ultraviolet fluorescence
  • ISO/DIS 3656:2000 Animal and Vegetable Fats and Oils - Determination of Ultraviolet Absorbance Expressed as Specific UV Extinction
  • EN 14897:2006 Water conditioning equipment inside buildings - Devices using mercury low-pressure ultraviolet radiators - Requirements for performance, safety and testing (Incorporates Amendment A1: 2007)
  • EN 14897:2006+A1:2007 Water conditioning equipment inside buildings - Devices using mercury low-pressure ultraviolet radiators - Requirements for performance, safety and testing
  • EN ISO 11985:1997 Ophthalmic Optics - Contact Lenses - Ageing by Exposure to UV and Visible Radiation (in Vitro Method) ISO 11985:1997
  • prEN 591-1991 In-vitro diagnostic systems; requirements for user manual of in-vitro diagnostic instruments for professional use
  • EN 14255-4:2006 Measurement and assessment of personal exposures to incoherent optical radiation - Part 4: Terminology and quantities used in UV-, visible and IR-exposure measurements
  • EN 12194:2000 Shutters, external and internal blinds - Misuse - Test methods
  • prEN 2155-4-1980 Aerospace series; test methods for transparent materials for aircraft glazing; part 4: determination of ultra-violet radiation transmission at 290 to 330 nm

海关总署, Use of UV testing

  • SN/T 5153-2019 Determination of fluorescent whitening agent content in household paper by UV spectroscopy

IEEE - The Institute of Electrical and Electronics Engineers@ Inc., Use of UV testing

  • IEEE C37.50-1973 TEST PROCEDURES FOR LOW-VOLTAGE AC POWER CIRCUIT BREAKERS USED IN ENCLOSURES
  • IEEE C37.50-1981 TEST PROCEDURES FOR LOW- VOLTAGE AC POWER CIRCUIT BREAKERS USED IN ENCLOSURES
  • IEEE C37.20.6-2015 4.76 kV to 38 kV Rated Ground and Test Devices Used in Enclosures
  • IEEE C37.20.6-2007 4.76 kV to 38 kV Rated Ground and Test Devices Used in Enclosures
  • IEEE C37.20.6-1997 4.76 kV to 38 kV Rated Grounding and Testing Devices Used in Enclosures

CEN - European Committee for Standardization, Use of UV testing

  • EN 14625:2005 Ambient air quality - Standard method for the measurement of the concentration of ozone by ultraviolet photometry
  • EN 17156:2018 Cosmetics - Analytical methods - LC/UV method for the identification and quantitative determination in cosmetic products of the 22 organic UV filters in use in the EU

IT-UNI, Use of UV testing

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Use of UV testing

  • GB/T 35241-2017 Test methods for volatile content of ultraviolet curable coatings for wood products

NZ-SNZ, Use of UV testing

  • AS/NZS 4547.5:2004 Methods of testing wool packs for greasy wool Method 5: Strength of fabric after exposure to ultraviolet radiation
  • AS/NZS 1580.483.2:1994 Paints and Related Materials - Methods of Test Method 483.2: Resistance to Artificial Weathering - Fluorescent UV-Condensation Type Instruments

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, Use of UV testing

  • PREN 4057-307-2001 Aerospace Series Cable Ties for Harnesses Test Methods Part 307: Resistance to Ultra Violet Radiation (Edition P 1)

(U.S.) Plastic Pipe Association, Use of UV testing

  • PPI TN-47-2013 POLYETHYLENE RESIN TESTING REQUIREMENTS TO SUPPORT ASTM D2513 UV EXPOSURE LIMITS OF POLYETHYLENE COMPOUND

Institute of Electrical and Electronics Engineers (IEEE), Use of UV testing

American National Standards Institute (ANSI), Use of UV testing

  • ANSI/NFPA 268-2011 Standard Test Method for Determining Ignitibility of Exterior Wall Assemblies Using a Radiant Heat Energy Source
  • ANSI/ASTM F2975:2012 TEST METHOD FOR MEASURING THE FIELD PERFORMANCE OF COMMERCIAL KITCHEN VENTILATION SYSTEMS
  • ANSI/NACE RP0104-2004 The Use of Coupons for Cathodic Protection Monitoring Applications

Society of Motion Picture and Television Engineers (SMPTE), Use of UV testing

Indonesia Standards, Use of UV testing

YU-JUS, Use of UV testing

  • JUS N.A5.544-1989 Bigh-voltage test technicpies. Application gui?e for measuring ?evices

NEMA - National Electrical Manufacturers Association, Use of UV testing

  • NEMA C37.52-1974 Test Procedures for Low Voltage AC Power Circuit Protectors Used in Enclosures (Supersedes ANSI C37.52:1974)

ETSI - European Telecommunications Standards Institute, Use of UV testing

  • TS 103 255-2015 Methods for Testing and Specification (MTS); TTCN-3 Conformance Test Suite for use of XML schema; Abstract Test Suite (ATS) and Implementation eXtra Information for Testing (IXIT) (V1.1.1; Includes Diskette)

National Fire Protection Association (NFPA), Use of UV testing

  • NFPA 268-2006 Standard Test Method for Determining Ignitibility of Exterior Wall Assemblies Using a Radiant Heat Energy Source 2007 Edition

CZ-CSN, Use of UV testing

  • CSN 77 0864-1987 Adhesive packaging tapes Determination of the force applied during the winding the tápe of the spool

IN-BIS, Use of UV testing

Association of German Mechanical Engineers, Use of UV testing

  • VDI 3958 Blatt 13-2014 Environmental simulation - Tropicalisation of paint coatings for outdoor use - Test methods




Copyright ©2007-2023 ANTPEDIA, All Rights Reserved