ZH
RU
ES
metal inner group
metal inner group, Total:99 items.
In the international standard classification, metal inner group involves: Medical equipment, Products of non-ferrous metals, Corrosion of metals, Surface treatment and coating, Wastes, Storing. Warehousing, Cans. Tins. Tubes, Materials for aerospace construction, Equipment for processing of minerals, Construction materials, Pipeline components and pipelines, Iron and steel products, External structures, Electrical accessories, Particle size analysis. Sieving, Tobacco, tobacco products and related equipment, Aerospace fluid systems and components, Rubber and plastics products, Elements of buildings, MATERIALS HANDLING EQUIPMENT, Barrels. Drums. Canisters, Installations in buildings, Aircraft and space vehicles in general, Springs.
International Organization for Standardization (ISO), metal inner group
- ISO/CD 15142-2 Implants for surgery — Metal intramedullary nailing systems — Part 2: Locking components
- ISO 4783-2:1981 Industrial wire screens and woven wire cloth — Guide to the choice of aperture size and wire diameter combinations — Part 2: Preferred combinations for woven wire cloth
- ISO 4783-2:1989 Industrial wire screens and woven wire cloth; guide to the choice of aperture size and wire diameter combinations; part 2: preferred combinations for woven wire cloth
- ISO 15142-1:2003 Implants for surgery — Metal intramedullary nailing systems — Part 1: Intramedullary nails
- ISO/CD 15142-1 Implants for surgery — Metal intramedullary nailing systems — Part 1: Intramedullary nails
- ISO 8829-2:2006 Aerospace - Test methods for polytetrafluoroethylene (PTFE) inner-tube hose assemblies - Part 2: Non-metallic braid
- ISO 8829-1:2009 Aerospace - Test methods for polytetrafluoroethylene (PTFE) inner-tube hose assemblies - Part 1: Metallic (stainless steel) braid
GM North America, metal inner group
- GMN11226-2011 Metallic Paint, One or Two Component, Interior, Sunscreen Lotion Resistant for Polyurethane Issue 2; Do Not Use on New Programs; No Replacement
- GM GM9321P-1991 Internal Stress in Nonmetallic Fuel Tanks
- GM GM9324P-1991 Internal Cleanliness of Nonmetallic Fuel Tanks
- GM GM197M-1997 Powder Topcoats for Interior Metal Components
Standard Association of Australia (SAA), metal inner group
- AS 1869.2:2023 Hose and hose assemblies for liquefied petroleum gases (LP Gas), natural gas and town gas, Part 2: Metallic liners
- AS 2832.4:1994 Guide to the cathodic protection of metals Part 4: Internal surfaces
RO-ASRO, metal inner group
- STAS 5852/1-1986 INDOOR PORCELAIN POST INSULATORS WITH INNER METAL FITTINGS FOR ELECTRICAL PURPOSES Assembled post insulators
- STAS 5852/3-1972 INDOOR PORCELAIN POST INSU- LATORS WITH INNER METAL FITTINGS FOR ELEGTRICAL ENGINEERING PURPOSES Metal fittings
- STAS 5852/2-1986 INDOOR POHCELAIN POST INSULATORS WITII INNER METAL F1TTINGS FOR ELECTRICAL PURPOSES INSUI.ATORS WITHOUT FITTINGS Dimensions
German Institute for Standardization, metal inner group
- DIN 50929-2:2017-03 Corrosion of metals - Corrosion likelihood of metallic materials when subject to corrosion from the outside - Part 2: Service components inside buildings
- DIN EN 12499:2003 Internal cathodic protection of metallic structures; German version EN 12499:2003
- DIN EN 12499:2003-07 Internal cathodic protection of metallic structures; German version EN 12499:2003
- DIN EN 1856-2:2021 Chimneys - Requirements for metal chimneys - Part 2: Metal flue liners and connecting flue pipes; German and English version prEN 1856-2:2021
- DIN EN 1856-2:2019 Chimneys - Requirements for metal chimneys - Part 2: Metal flue liners and connecting flue pipes; German and English version prEN 1856-2:2019
Association Francaise de Normalisation, metal inner group
- NF E29-260:2015 Industrial pipes - Metallic pipe components internally coated with fluorocarbon resins - PTFE - FEP - PFA
- NF A05-676*NF EN 12499:2003 Internal cathodic protection of metallic structures
- NF D36-108:1983 Internal connection of domestic cooking appliances by means of flexible metal hoses.
U.S. Military Regulations and Norms, metal inner group
- ARMY MIL-C-48070 NOTICE 2-1996 CASE, CARTRIDGE ASSEMBLY, 40MM, M169, INERT METAL PARTS FOR
- ARMY MIL-C-48070 (1)-1993 CASE, CARTRIDGE ASSEMBLY, 40MM, M169, INERT METAL PARTS FOR
- ARMY MIL-C-48070 VALID NOTICE 1-1990 CASE, CARTRIDGE ASSEMBLY, 40MM, M169, INERT METAL PARTS FOR
- ARMY MIL-C-48070-1972 CASE, CARTRIDGE ASSEMBLY, 40MM, M169, INERT METAL PARTS FOR
- ARMY MIL-DTL-14824 C VALID NOTICE 1-2013 Projectile 155MM, HE, Metal Parts Assembly, M107
- ARMY MIL-P-60628 NOTICE 2-1996 PROJECTILE, 152MM, SLUG, PROOFING, METAL PARTS ASSEMBLY
- ARMY MIL-P-60628 VALID NOTICE 1-1990 PROJECTILE, 152MM, SLUG, PROOFING, METAL PARTS ASSEMBLY
- ARMY MIL-P-60628 (1)-1967 PROJECTILE, 152MM, SLUG, PROOFING, METAL PARTS ASSEMBLY
- ARMY MIL-P-60628-1966 PROJECTILE, 152MM, SLUG, PROOFING, METAL PARTS ASSEMBLY
- ARMY MIL-P-50718 B VALID NOTICE 2-2013 Projectile, 4.2 Inch, HE M329A2 Metal Parts Assembly
IEEE - The Institute of Electrical and Electronics Engineers@ Inc., metal inner group
British Standards Institution (BSI), metal inner group
- BS EN 12499:2003 Internal cathodic protection of metallic structures
- BS EN 12499:2003(2006) Internal cathodic protection of metallic structures
- BS 6499:1998 Metal screw necks, screw caps and inner seals for metal containers - Specification
- BS 1369-1:1987 Steel lathing for internal plastering and external rendering - Specification for expanded metal and ribbed lathing
- BS ISO 8829-1:2009 Aerospace - Test methods for polytetraflouroethylene (PTFE) inner-tube hose assemblies - Metallic (stainless steel) braid
Danish Standards Foundation, metal inner group
- DS/EN 12499/AC:2006 Internal cathodic protection of metallic structures
- DS/EN 12499:2003 Internal cathodic protection of metallic structures
- DS/EN 13658-1/ZA:2008 Metal lath and beads – Definitions, requirements and test methods – Part 1: Internal plastering
- DS/EN 13658-1:2005 Metal lath and beads – Definitions, requirements and test methods – Part 1: Internal plastering
- DS/EN 1856-2:2009 Chimneys - Requirements for metal chimneys - Part 2: Metal flue liners and connecting flue pipes
Lithuanian Standards Office , metal inner group
ES-UNE, metal inner group
AENOR, metal inner group
- UNE-EN 12499:2003 Internal cathodic protection of metallic structures.
- UNE-EN 1856-2:2010 Chimneys - Requirements for metal chimneys - Part 2: Metal flue liners and connecting flue pipes
RU-GOST R, metal inner group
IT-UNI, metal inner group
Taiwan Provincial Standard of the People's Republic of China, metal inner group
Group Standards of the People's Republic of China, metal inner group
CZ-CSN, metal inner group
Professional Standard - Business, metal inner group
Society of Automotive Engineers (SAE), metal inner group
PL-PKN, metal inner group
GM Global, metal inner group
- GMW 15450-2012 Internal Cleanliness of Nonmetallic Fuel Tanks Issue 2; English
CEN - European Committee for Standardization, metal inner group
- PREN 13658-1-2017 Metal lath and beads - Definitions@ requirements and test methods - Part 1: Internal plastering
FI-SFS, metal inner group
MSS - Manufacturers Standardization Society of the Valve and Fittings Industry., metal inner group
Korean Agency for Technology and Standards (KATS), metal inner group
Professional Standard - Medicine, metal inner group
- YY/T 0727.1-2009 Implants for surgery.Metal intramedullary nailing system.Part 1:Intramedullary nails
KR-KS, metal inner group
- KS P ISO 15142-1-2021 Implants for surgery — Metal intramedullary nailing systems — Part 1: Intramedullary nails
Professional Standard - Tobacco, metal inner group
IN-BIS, metal inner group
United States Navy, metal inner group
- NAVY MS90457 REV A VALID NOTICE 1-1987 HOSE ASSEMBLIES, METAL, LIQUID OXYGEN
- NAVY MS90457 REV A-1981 HOSE ASSEMBLIES, METAL, LIQUID OXYGEN
- NAVY MIL-C-60103 NOTICE 2-1999 CUTTER, POWDER ACTUATED, M8 METAL PARTS ASSEMBLY
- NAVY MIL-C-60103 (1)-1989 CUTTER, POWDER ACTUATED, M8 METAL PARTS ASSEMBLY
- NAVY MIL-C-60103-1964 CUTTER, POWDER ACTUATED, M8 METAL PARTS ASSEMBLY
- NAVY MIL-C-60105 NOTICE 2-1999 CUTTER, POWDER ACTUATED, M8 ASSEMBLY
- NAVY MIL-C-60105 VALID NOTICE 1-1986 CUTTER, POWDER ACTUATED, M8 ASSEMBLY
- NAVY MIL-C-60105 (1)-1966 CUTTER, POWDER ACTUATED, M8 ASSEMBLY
- NAVY MIL-C-60105-1964 CUTTER, POWDER ACTUATED, M8 ASSEMBLY
Japanese Industrial Standards Committee (JISC), metal inner group
AT-ON, metal inner group
- OENORM EN 1856-2-2021 Chimneys - Requirements for metal chimneys - Part 2: Metal flue liners and connecting flue pipes
European Committee for Standardization (CEN), metal inner group
- prEN 1856-2-2021 Chimneys - Requirements for metal chimneys - Part 2: Metal flue liners and connecting flue pipes
- prEN 1856-2 Chimneys - Requirements for metal chimneys - Part 2: Metal flue liners and connecting flue pipes
未注明发布机构, metal inner group
- DIN EN 1856-2:2004 Exhaust systems – Requirements for metal exhaust systems – Part 2: Metal inner pipes and connectors
(U.S.) Ford Automotive Standards, metal inner group
Association of German Mechanical Engineers, metal inner group