ZH
RU
ES

Double 85 test reference

Double 85 test reference, Total:429 items.

In the international standard classification, Double 85 test reference involves: Mobile services, Non-destructive testing, Aerospace fluid systems and components, Protection against fire, Construction materials, Hydraulic fluids, Lubricants, industrial oils and related products, Tyres, Plastics, Noise with respect to human beings, Fuels, Electrical and electronic testing, Graphical symbols, Road engineering, Materials and articles in contact with foodstuffs, Kitchen equipment, Analytical chemistry, Testing of metals, Petroleum products in general, Mechanical testing, Telecommunication systems, Insulating materials, Structures of buildings, Solar energy engineering, Rubber, Medical sciences and health care facilities in general, Equipment for the chemical industry, Jewellery, Fibre optic communications, Semiconducting materials, Laboratory medicine, Shipbuilding and marine structures in general, Air quality, Products of the textile industry, Refractories, Nuclear energy engineering, Languages used in information technology, Quality, Fasteners, Materials for aerospace construction, Vocabularies, Electric road vehicles, Electromechanical components for electronic and telecommunications equipment, Soil quality. Pedology, Iron and steel products, Continuous handling equipment, Adhesives, Seals, glands, Linear and angular measurements, Applications of information technology, Non-textile floor coverings, Measurement of volume, mass, density, viscosity, Medical equipment, Thermodynamics and temperature measurements, Road vehicle systems, Metrology and measurement in general, Pipeline components and pipelines, Industrial automation systems, Internal combustion engines for road vehicles, Aircraft and space vehicles in general, Cereals, pulses and derived products, Organic chemicals, Internal combustion engines, Photography.

American National Standards Institute （ANSI), Double 85 test reference

ANSI/TIA/EIA 102.BABC-1999 Project 25 - Vocoder Reference Test

National Metrological Technical Specifications of the People's Republic of China, Double 85 test reference

JJF(机械) 1022-2018 Penetration testing reference block calibration specification
JJF(机械)1022-2018 Penetration testing reference block calibration specification

British Standards Institution (BSI), Double 85 test reference

BS EN 13192:2002(2007) Non-destructive testing - Leak testing - Calibration of reference leaks for gases
BS EN 13192:2002 Non-destructive testing - Leak testing - Calibration of reference leaks for gases
BS EN ISO 389-9:2010 Acoustics. Reference zero for the calibration of audiometric equipment. Preferred test conditions for the determination of reference hearing threshold levels
BS EN ISO 389-9:2009 Acoustics - Reference zero for the calibration of audiometric equipment - Preferred test conditions for the determination of reference hearing threshold levels
BS EN 12875-1:2005 Mechanical dishwashing resistance of utensils - Reference test method for domestic articles
BS 2000-0-0.2:1996 Methods of test for petroleum and its products. Specifications for IP standard reference liquids
BS EN 12697-9:2002 Bituminous mixtures - Test methods for hot mix asphalt - Determination of the reference density
BS EN 1811:1998+A1:2008 Reference test method for release of nickel from products intended to come into direct and prolonged contact with the skin
BS 2000-0-2:1996 Methods of test for petroleum and its products. General introduction. Specifications for IP standard reference liquids
BS EN ISO 10993-8:2001 Biological evaluation of medical devices - Selection and qualification of reference materials for biological tests
BS EN 13286-2:2010 Unbound and hydraulically bound mixtures. Test methods for laboratory reference density and water content. Proctor compaction
BS EN 13286-2:2010(2012) Unbound and hydraulically bound mixtures. Test methods for laboratory reference density and water content. Proctor compaction
BS EN 13286-2:2004 Unbound and hydraulically bound mixtures - Test methods for the determination of the laboratory reference density and water content - Proctor compaction
BS EN 15051-2:2013 Workplace exposure. Measurement of the dustiness of bulk materials. Rotating drum method
BS EN 15051:2006 Workplace atmospheres - Measurement of the dustiness of bulk materials - Requirements and reference test methods
BS EN 1811:1998 Reference test method for release of nickel from products intended to come into direct and prolonged contact with the skin
BS EN 1811+A1:1999 Reference test method for release of nickel from products intended to come into direct and prolonged contact with the skin
BS EN 1811:2011+A1:2015 Reference test method for release of nickel from products intended to come into direct and prolonged contact with the skin
BS M 36:1970 Method for ultrasonic testing of special forgings by an immersion technique using flat-bottomed holes as a reference standard
BS EN ISO 389-6:2007 Acoustics - Reference zero for the calibration of audiometric equipment - Reference threshold of hearing for test signals of short duration
BS EN 60512-26-100:2008 Connectors for electronic equipment — Tests and measurements — Part 26-100: Measurement setup, test and reference arrangements and measurements for connectors according to IEC 60603-7 — Tests 26a to 26g
BS EN 60512-26-100:2009 Connectors for electronic equipment. Tests and measurements. Measurement setup, test and reference arrangements and measurements for connectors according to IEC 60603-7. Tests 26a to 26g
BS EN 13286-3:2003 Unbound and hydraulically bound mixtures - Test methods for laboratory reference density and water content - Vibrocompression with controlled parameters
22/30423349 DC BS ISO 8714. Electric road vehicles. Reference energy consumption and range. Test procedures for passenger cars and light commercial vehicles
BS EN 60512-26-100:2008+A1:2011 Connectors for electronic equipment. Tests and measurements. Measurement setup, test and reference arrangements and measurements for connectors according to IEC 60603-7 Tests 26a to 26g
BS EN 13286-4:2003 Unbound and hydraulically bound mixtures - Test methods for laboratory reference density and water content - Vibrating hammer
BS EN 13286-5:2003 Unbound and hydraulically bound mixtures - Test methods for laboratory reference density and water content - Vibrating table
BS ISO 21995:2008 Road vehicles - Test of vehicle air braking systems with a permissible mass of over 3,5 t. Acquisition and use of reference values using a roller brake tester
BS 4317-3:1999 Methods of test for cereals and pulses - Determination of moisture content of cereals and cereal products (routine reference method)
BS EN 13286-4:2021 Tracked Changes. Unbound and hydraulically bound mixtures. Test methods for laboratory reference density and water content. Vibrating hammer
BS EN 2004-7:2017 Aerospace series. Test methods for aluminium and aluminium alloy products - Reference blocks for the calibration of measuring equipment used in the determination of electrical conductivity of wrought aluminium and aluminium alloys
BS EN ISO 20776-1:2006 Clinical laboratory testing and in vitro diagnostic test systems - Susceptibility testing of infectious agents and evaluation of performance of antimicrobial susceptibility test devices - Reference method for testing the in vitro activity of antimicrobial
BS EN 13286-1:2003 Unbound and hydraulically bound mixtures - Test methods for laboratory reference density and water content - Introduction, general requirements and sampling
BS EN 1811:2011 Reference test method for release of nickel from all post assemblies which are inserted into pierced parts of the human body and articles intended to come into direct and prolonged contact with the skin
BS EN ISO 16256:2021 Tracked Changes. Clinical laboratory testing and in vitro diagnostic test systems. Broth micro-dilution reference method for testing the in vitro activity of antimicrobial agents against yeast fungi involved in infectious diseases
20/30410974 DC BS EN 13286-4. Unbound and hydraulically bound mixtures. Part 4. Test methods for laboratory reference density and water content. Vibrating hammer
BS ISO 1431-3:2017 Tracked Changes. Rubber, vulcanized or thermoplastic. Resistance to ozone cracking. Reference and alternative methods for determining the ozone concentration in laboratory test chambers
BS EN 13286-1:2021 Tracked Changes. Unbound and hydraulically bound mixtures. Test methods for laboratory reference density and water content. Introduction, general requirements and sampling

Society of Automotive Engineers (SAE), Double 85 test reference

SAE AMS3020A-1997 Oil, Reference, for
SAE AMS3020A-2013 Oil, Reference, for “L” Stock Rubber Testing
SAE AMS3020B-2020 Oil, Reference, for “L” Stock Rubber Testing
SAE AMS3023-1995 Fluid, Reference for Testing Polyol Ester (and Diester) Resistant Material
SAE J3046-1-1994 Reciprocating Internal Combustion Engines Performance Part 1: Standard Reference Conditions, Declarations of Power, Fuel and lubricating Oil Consumptions, and Test Methods

SAE - SAE International, Double 85 test reference

SAE AMS3020-1978 "Oil@ Reference@ for ""L"" Stock Rubber Testing"

Association Francaise de Normalisation, Double 85 test reference

NF P92-528*NF EN 14390:2007 Fire-test - Large-scale room reference test for surface products
NF A03-156-3*NF EN ISO 16859-3:2015 Metallic materials - Leeb hardness test - Part 3 : calibration of reference test blocks
NF S30-007-6*NF EN ISO 389-6:2008 Acoustics - Reference zero for the calibration of audiometric equipment - Part 6 : reference threshold of hearing for test signals of short duration
NF A09-016*NF ISO 12715:2014 Non-destructive testing - Ultrasonic testing - Reference blocks and test procedures for the characterization of contact probe sound beams
NF A03-153-3*NF EN ISO 6508-3:2015 Metallic materials - Rockwell hardness test - Part 3 : calibration of reference blocks
NF A03-154-3:2006 Metallic materials - Vickers hardness test - Part 3 : calibration of reference blocks.
NF A03-152-3:2006 Metallic materials - Brinell hardness test - Part 3 : calibration of reference blocks.
NF A03-152-3*NF EN ISO 6506-3:2014 Metallic materials - Brinell hardness test - Part 3 : calibration of reference blocks
NF P18-920*NF EN 1766:2017 Products and systems for the protection and repair of concrete structures - Test methods - Reference concretes for testing
NF P18-920:2000 Products and systems for the protection and repair of concrete structures - Test methods - Reference concretes for testing.
NF D21-621-1*NF EN 12875-1:2005 Mechanical dishwashing resistance of ustensils - Part 1 : reference test method for domestic articles
NF C93-805-4-1:2011 Optical amplifiers - Test methods - Part 4-1 : gain transient parameters - Two-wavelength method.
NF EN 993-13:1995 Méthodes d'essai pour produits réfractaires façonnés denses - Partie 13 : spécifications pour cônes pyroscopiques de référence pour emploi en laboratoire.
NF EN 480-1:2014 Adjuvants pour béton, mortier et coulis - Méthodes d'essais - Partie 1 : béton et mortier de référence pour essais
NF EN 480-13:2015 Adjuvants pour béton, mortier et coulis - Méthodes d'essai - Partie 13 : mortier à maçonner de référence pour les essais menés sur les adjuvants de mortier
NF E25-039:2006 Fasteners - Clamp/torque test and Prevailing torque test according to NF EN ISO 16047 and NF EN ISO 2320 - Reference test conditions (degreasing method and test washer).
NF P18-310-13*NF EN 480-13:2015 Admixtures for concrete, mortar and grout - Test methods - Part 13 : reference masonry mortar for testing mortar admixtures
NF EN ISO 105-B08:2000 Textiles - Essais de solidité des teintures - Partie B08 : maîtrise de la qualité des matériaux de référence 1 à 7 de laine teinte en bleu
NF P98-846-3*NF EN 13286-3:2004 Unbound and hydraulically bound mixtures - Part 3 : test methods for laboratory reference density and water content - Vibrocompression with controlled parameters
NF P98-846-2:2005 Unbound and hydraulically bound mixtures - Part 2 : test methods for the determination of the laboratory reference density and water content - Proctor compaction.
NF P98-846-2*NF EN 13286-2:2010 Unbound and hydraulically bound mixtures - Part 2 : test methods for laboratory reference density and water content - Proctor compaction.
NF P98-231-3:1992 TESTS RELATING TO PAVEMENTS. COMPACTION TESTS ON NON BITUMINOUS MATEIRALS. PART 3 : DETERMINATION OF THE MAXIMAL APPARENT REFERENCE SPECIFIC GRAVITY, AND COMPACTION DIFFICULTY INDEX, USING CONTROLLED VIBROCOMPRESSION TEST.
NF EN ISO 283:2023 Courroies transporteuses à carcasse textile - Résistance à la traction, allongement à la rupture et allongement sous force de référence en pleine épaisseur - Méthode d'essai
NF C93-400-26-100*NF EN 60512-26-100:2009 Connectors for electronic equipment - Tests and measurements - Part 26-100 : measurement setup, test and reference arrangements and measurements for connectors according to IEC 60603-7 - Tests 26a to 26g
NF T47-102*NF EN ISO 283:2016 Textile conveyor belts - Full thickness tensile strength, elongation at break and elongation at the reference load - Test method
NF EN 302-6:2023 Adhésifs pour structures portantes en bois - Méthodes d'essai - Partie 6 : détermination du temps de pressage minimal dans des conditions de référence
NF EN 13286-2:2010 Mélanges traités et mélanges non traités aux liants hydrauliques - Partie 2 : méthodes d'essai de détermination en laboratoire de la masse volumique de référence et de la teneur en eau - Compactage Proctor
NF EN 13286-3:2004 Mélanges traités et mélanges non traités aux liants hydrauliques - Partie 3 : méthodes d'essai de détermination en laboratoire de la masse volumique de référence et la teneur en eau - Vibrocompression à paramètres contrôlés
NF EN 4050-3:2013 Série aérospatiale - Méthode d'essai applicable aux matériaux métalliques - Contrôle par ultrasons de barres, plaques, demi-produit pour forgeage et pièces forgées - Partie 3 : blocs de référence
NF A03-153-3:2006 Metallic materials - Rockwell hardness test - Part 3 : calibration of reference blocks (scales A, B, C, D, E, F, G, H, K, N, T).
NF E29-591-20*NF EN 1254-20:2021 Copper and copper alloys - Plumbing fittings - Part 20: Definitions, thread dimensions, test methods, reference data and supporting information
NF T46-019-3:2006 Rubber, vulcanized or thermoplastic - Resistance to ozone cracking - Part 3 : reference and alternative methods for determining the ozone concentration in laboratory test chambers.
NF C46-025-2*NF EN 61298-2:2009 Process measurement and control devices - General methods and procedures for evaluating performance - Part 2 : tests under reference conditions
NF EN 13286-5:2003 Mélanges traités et mélanges non traités aux liants hydrauliques - Partie 5 : méthode d'essais pour la masse volumique de référence et la teneur en eau en laboratoire - Table vibrante
NF P98-846-1*NF EN 13286-1:2004 Unbound and hydraulically bound mixtures - Part 1 : Test methods for laboratory reference density and water content - Introduction and general requirements.
NF T46-019-3*NF ISO 1431-3:2017 Rubber, vulcanized or thermoplastic - Resistance to ozone cracking - Part 3 : reference and alternative methods for determining the ozone concentration in laboratory test chambers
NF ISO 1431-3:2017 Caoutchouc vulcanisé ou thermoplastique - Résistance au craquelage par l'ozone - Partie 3 : méthode de référence et autres méthodes pour la détermination de la concentration d'ozone dans les enceintes d'essai de laboratoire
NF P98-846-4*NF EN 13286-4:2003 Unbound and hydraulically bound mixtures - Part 4 : test methods for laboratory reference density and water content - Vibrating hammer
NF P98-846-5*NF EN 13286-5:2003 Unbound and hydraulically bound mixtures - Part 5 : test methods for laboratory reference density and water content - Vibrating table
NF E37-200:1996 Reciprocating internal combustion engines. Performance. Part 1 : standard reference conditions, declarations of power, fuel and lubrificating oil consumptions, and test methods.
NF EN 13286-4:2021 Mélanges traités et mélanges non traités aux liants hydrauliques - Méthode d'essai de détermination en laboratoire de la masse volumique de référence et de la teneur en eau - Partie 4 : marteau vibrant
NF A06-221:2011 Reference test method for release of nickel from all post assemblies which are inserted into pierced parts of the human body and articles intended to come into direct and prolonged contact with the skin.
NF T76-336-4*NF EN 15416-4:2017 Adhesives for load bearing timber structures other than phenolic and aminoplastic - Test methods - Part 4 : determination of open assembly time under referenced conditions
NF T76-336-5*NF EN 15416-5:2017 Adhesives for load bearing timber structures other than phenolic and aminoplastic - Test methods - Part 5 : determination of minimum pressing time under referenced conditions
NF EN 2004-7:2017 Série aérospatiale - Méthodes d'essais applicables aux produits en aluminium et alliages d'aluminium - Partie 7 : blocs de référence pour l'étalonnage pour la détermination de la conductivité électrique d'aluminium et d'alliages d'alumin...
NF S92-012*NF EN ISO 16256:2021 Clinical laboratory testing and in vitro diagnostic test systems - Broth micro-dilution reference method for testing the in vitro activity of antimicrobial agents against yeast fungi involved in infectious diseases

German Institute for Standardization, Double 85 test reference

DIN EN 14390:2007 Fire test - Large-scale room reference test for surface products; English version of DIN EN 14390:2007-04
DIN EN 480-1:2021-12 Admixtures for concrete, mortar and grout - Test methods - Part 1: Reference concrete and reference mortar for testing; German and English version prEN 480-1:2021 / Note: Date of issue 2021-11-12*Intended as replacement for DIN EN 480-1 (2015-01).
DIN EN 480-1:2015-01 Admixtures for concrete, mortar and grout - Test methods - Part 1: Reference concrete and reference mortar for testing; German version EN 480-1:2014 / Note: To be replaced by DIN EN 480-1 (2021-12).
DIN EN 480-1:2021 Admixtures for concrete, mortar and grout - Test methods - Part 1: Reference concrete and reference mortar for testing; German and English version prEN 480-1:2021
DIN 50156-3:2007 Metallic materials - Leeb hardness test - Part 3: Calibration of reference blocks
DIN EN ISO 389-6:2007 Acoustics - Reference zero for the calibration of audiometric equipment - Part 6: Reference threshold of hearing for test signals of short duration (ISO 389-6:2007); English version of DIN EN ISO 389-6:2007-10
DIN EN 14845-1:2007-09 Test methods for fibres in concrete - Part 1: Reference concretes; German version EN 14845-1:2007
DIN EN ISO 14577-3:2015-11 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 3: Calibration of reference blocks (ISO 14577-3:2015); German version EN ISO 14577-3:2015
DIN EN 12875-1:2005 Mechanical dishwashing resistance of utensils - Part 1: Reference test method for domestic articles; German version EN 12875-1:2005
DIN EN 1811:1999 Reference test method for release of nickel from products intended to come into direct and prolonged contact with the skin; German version EN 1811:1998
DIN EN 993-13:1995-04 Methods of test for dense shaped refractory products - Part 13: Specification for pyrometric reference cones for laboratory use; German version EN 993-13:1995
DIN EN 1766:2000 Products and systems for the protection and repair of concrete structures - Test methods - Reference concretes for testing; German version EN 1766:2000
DIN EN 1766:2017 Products and systems for the protection and repair of concrete structures - Test methods - Reference concretes for testing; German version EN 1766:2017
DIN EN 480-13:2015-08 Admixtures for concrete, mortar and grout - Test methods - Part 13: Reference masonry mortar for testing mortar admixtures; German version EN 480-13:2015
DIN 55303-7:1996 Statistical interpretation of data - Part 7: Estimating and test procedures for Weibull distributions with two parameters
DIN EN 13286-3:2003 Unbound and hydraulically bound mixtures - Part 3: Test methods for laboratory reference density and water content; Vibrocompression with controlled parameters; German version EN 13286-3:2003
DIN EN ISO 3452-3:2014 Non-destructive testing - Penetrant testing - Part 3: Reference test blocks (ISO 3452-3:2013); German version EN ISO 3452-3:2013
DIN EN 4050-3:2012-12 Aerospace series - Test method for metallic materials - Ultrasonic inspection of bars, plates, forging stock and forgings - Part 3: Reference blocks; German and English version EN 4050-3:2012
DIN EN 302-7:2023-05 Adhesives for load-bearing timber structures - Test methods - Part 7: Determination of the working life under referenced conditions; German version EN 302-7:2023
DIN EN 13286-4:2003 Unbound and hydraulically bound mixtures - Part 4: Test methods for laboratory reference density and water content; Vibrating hammer; German version EN 13286-4:2003
DIN EN 13286-3:2003-07 Unbound and hydraulically bound mixtures - Part 3: Test methods for laboratory reference density and water content; Vibrocompression with controlled parameters; German version EN 13286-3:2003
DIN EN 302-6:2023-05 Adhesives for load-bearing timber structures - Test methods - Part 6: Determination of the minimum pressing time under referenced conditions; German version EN 302-6:2023
DIN EN 302-5:2023-05 Adhesives for load-bearing timber structures - Test methods - Part 5: Determination of maximum assembly time under referenced conditions; German version EN 302-5:2023
DIN EN 1254-20:2019 Copper and copper alloys - Plumbing fittings - Part 20: Definitions, thread dimensions, test methods, reference data and supporting information; German and English version prEN 1254-20:2019
DIN EN 13286-2:2013 Unbound and hydraulically bound mixtures.Part 2: Test methods for laboratory reference density and water content - Proctor compaction; German version EN 13286-2:2010 + AC:2012
DIN EN 13286-2:2010 Unbound and hydraulically bound mixtures - Part 2: Test methods for laboratory reference density and water content - Proctor compaction; German version EN 13286-2:2010
DIN EN 13286-5:2003-07 Unbound and hydraulically bound mixtures - Part 5: Test methods for laboratory reference density and water content; Vibrating table; German version EN 13286-5:2003
DIN EN 13286-1:2003 Unbound and hydraulically bound mixtures - Part 1: Test methods for laboratory reference density and water content; introduction and general requirements and sampling; German version EN 13286-1:2003
DIN EN 1811 Berichtigung 1:2008 Reference test method for release of nickel from products intended to come into direct and prolonged contact with the skin; German version EN 1811:1998+A1:2008, Corrigendum to DIN EN 1811:2008-06
DIN EN 13286-4:2022 Unbound and hydraulically bound mixtures - Part 4: Test methods for laboratory reference density and water content - Vibrating hammer
DIN EN 13286-4:2020 Unbound and hydraulically bound mixtures - Part 4: Test methods for laboratory reference density and water content - Vibrating hammer; German and English version prEN 13286-4:2020
DIN EN 13286-5:2003 Unbound and hydraulically bound mixtures - Part 5: Test methods for laboratory reference density and water content; Vibrating table; German version EN 13286-5:2003
DIN EN 13286-2:2013-02 Unbound and hydraulically bound mixtures - Part 2: Test methods for laboratory reference density and water content - Proctor compaction; German version EN 13286-2:2010 + AC:2012
DIN EN 13286-4:2022-02 Unbound and hydraulically bound mixtures - Part 4: Test methods for laboratory reference density and water content - Vibrating hammer; German version EN 13286-4:2021
DIN EN 1811:2008 Reference test method for release of nickel from products intended to come into direct and prolonged contact with the skin; German version EN 1811:1998+A1:2008
DIN EN 301217-3:2001 V interfaces at the digital Service Node (SN) - Interfaces at the VB5.2 reference point for the support of broadband or combined narrowband and broadband Access Networks (ANs) - Part 3: Test Suite Structure and Test Purposes (TSS&TPP) (Endorsement of the
DIN EN ISO 11699-2:2012 Non-destructive testing - Industrial radiographic films - Part 2: Control of film processing by means of reference values (ISO 11699-2:1998); German version EN ISO 11699-2:2011
DIN ISO 1431-3:2021 Rubber, vulcanized or thermoplastic - Resistance to ozone cracking - Part 3: Reference and alternative methods for determining the ozone concentration in laboratory test chambers (ISO 1431-3:2017)
DIN ISO 1431-3:2011 Rubber, vulcanized or thermoplastic - Resistance to ozone cracking - Part 3: Reference and alternative methods for determining the ozone concentration in laboratory test chambers (ISO 1431-3:2000)
DIN EN ISO 16256:2022-02 Clinical laboratory testing and in vitro diagnostic test systems - Broth micro-dilution reference method for testing the in vitro activity of antimicrobial agents against yeast fungi involved in infectious diseases (ISO 16256:2021); German version EN I...
DIN EN 1254-20:2021 Copper and copper alloys - Plumbing fittings - Part 20: Definitions, thread dimensions, test methods, reference data and supporting information; German version EN 1254-20:2021
DIN EN 16128:2011 Reference test method for release of nickel from those parts of spectacle frames and sunglasses intended to come into close and prolonged contact with the skin; German version EN 16128:2011
DIN ISO 1431-3:2021-12 Rubber, vulcanized or thermoplastic - Resistance to ozone cracking - Part 3: Reference and alternative methods for determining the ozone concentration in laboratory test chambers (ISO 1431-3:2017)
DIN EN 60512-26-100:2009 Connectors for electronic equipment - Tests and measurements - Part 26-100: Measurement setup, test and reference arrangements and measurements for connectors according to IEC 60603-7 - Tests 26a to 26g (IEC 60512-26-100:2008); German version EN 60512-26-
DIN EN 61290-4-1:2012 Optical amplifiers - Test methods - Part 4-1: Gain transient parameters - Two-wavelength method (IEC 61290-4-1:2011); German version EN 61290-4-1:2011
DIN EN 61290-4-1:2017 Optical amplifiers - Test methods - Part 4-1: Gain transient parameters - Two-wavelength method (IEC 61290-4-1:2016); German version EN 61290-4-1:2016
DIN EN 13286-1:2020 Unbound and hydraulically bound mixtures - Part 1: Test methods for laboratory reference density and water content - Introduction, general requirements and sampling; German and English version prEN 13286-1:2020
DIN EN 13286-1:2022-01 Unbound and hydraulically bound mixtures - Part 1: Test methods for laboratory reference density and water content - Introduction, general requirements and sampling; German version EN 13286-1:2021
DIN EN 2004-7:2017-10 Aerospace series - Test methods for aluminium and aluminium alloy products - Part 7: Reference blocks for the calibration of measuring equipment used in the determination of electrical conductivity of wrought aluminium and aluminium alloys; German and ...

European Committee for Standardization (CEN), Double 85 test reference

EN 480-1:2023 Admixtures for concrete, mortar and grout - Test methods - Part 1: Reference concrete and reference mortar for testing
EN 480-1:2014 Admixtures for concrete@ mortar and grout - Test methods - Part 1: Reference concrete and reference mortar for testing
EN ISO 4545-3:2018 Metallic materials - Knoop hardness test - Part 3: Calibration of reference blocks
EN 1766:2000 Products and Systems for the Protection and Repair of Concrete Structures - Test Methods - Reference Concretes for Testing
EN ISO 16859-3:2015 Metallic materials - Leeb hardness test - Part 2: Verification and calibration of the testing devices
EN ISO 4545-3:2005 Metallic materials - Knoop hardness test - Part 3: Calibration of reference blocks
EN 993-13:1995 Methods of test for dense shaped refractory products - Part 13: Specification for pyrometric reference cones for laboratory use
EN 13286-2:2010 Unbound and hydraulically bound mixtures - Part 2: Test methods for laboratory reference density and water content - Proctor compaction
EN 1766:2017 Products and Systems for the Protection and Repair of Concrete Structures - Test Methods - Reference Concretes for Testing
EN ISO 16256:2021 Clinical laboratory testing and in vitro diagnostic test systems - Broth micro-dilution reference method for testing the in vitro activity of antimicrobial agents against yeast fungi involved in infectious diseases (ISO 16256:2021)
EN ISO 16256:2012 Clinical laboratory testing and in vitro diagnostic test systems - Reference method for testing the in vitro activity of antimicrobial agents against yeast of fungi involved in infectious diseases (ISO 16256:2012)
EN 12697-9:2002 Bituminous Mixtures Test Methods for Hot Mix Asphalt - Part 9: Determination of the Reference Density
EN 1811:2023 Reference test method for release of nickel from all post assemblies which are inserted into pierced parts of the human body and articles intended to come into direct and prolonged contact with the skin
EN 1810:1998 Body-Piercing Post Assemblies - Reference Test Method for Determination of Nickel Content by Flame Atomic Absorption Spectrometry
prEN 302-7-2021 Adhesives for load-bearing timber structures - Test methods - Part 7: Determination of the working life under referenced conditions
EN 12875-1:2005 Mechanical dishwashing resistance of utensils - Part 1: Reference test method for domestic articles
EN 302-7:2023 Adhesives for load-bearing timber structures - Test methods - Part 7: Determination of the working life under referenced conditions
EN 13286-3:2003 Unbound and hydraulically bound mixtures - Part 3: Test methods for laboratory reference density and water content; Vibrocompression with controlled parameters
EN 302-6:2013 Adhesives for load-bearing timber structures - Test methods - Part 6: Determination of the minimum pressing time under referenced conditions
prEN 302-5-2021 Adhesives for load-bearing timber structures - Test methods - Part 5: Determination of maximum assembly time under referenced conditions
prEN 302-6-2021 Adhesives for load-bearing timber structures - Test methods - Part 6: Determination of the minimum pressing time under referenced conditions
EN 302-6:2023 Adhesives for load-bearing timber structures - Test methods - Part 6: Determination of the minimum pressing time under referenced conditions
EN 480-13:2002 Admixtures for concrete, mortar and grout - Test methods - Part 13: Reference masonry mortar for testing mortar admixtures
EN 16128:2011 Reference test method for release of nickel from those parts of spectacle frames and sunglasses intended to come into close and prolonged contact with the skin
EN ISO 389-6:2007 Acoustics - Reference zero for the calibration of audiometric equipment - Part 6: Reference threshold of hearing for test signals of short duration (ISO 389-6:2007)
EN 1254-20:2021 Copper and copper alloys - Plumbing fittings - Part 20: Definitions, thread dimensions, test methods, reference data and supporting information
EN 1811:1998 Reference test method for release of nickel from products intended to come into direct and prolonged contact with the skin Incorporates Amendment A1: April 2008
prEN 13286-4-2020 Unbound and hydraulically bound mixtures - Part 4: Test methods for laboratory reference density and water content - Vibrating hammer
EN ISO 20776-1:2020 Susceptibility testing of infectious agents and evaluation of performance of antimicrobial susceptibility test devices - Part 1: Broth micro-dilution reference method for testing the in vitro activity of antimicrobial agents against rapidly growing aerobi
EN 13286-1:2003 Unbound and hydraulically bound mixtures - Part 1: Test methods for laboratory reference density and water content; Introduction, general requirements and sampling
prEN 13286-1-2020 Unbound and hydraulically bound mixtures - Part 1: Test methods for laboratory reference density and water content - Introduction, general requirements and sampling

未注明发布机构, Double 85 test reference

BS EN 480-1:2023 Admixtures for concrete, mortar and grout — Test methods Part 1 : Reference concrete and reference mortar for testing
BS EN 993-13:1995(1999) Methods oftest for Dense shaped refractory products — Part 13 : Specification for pyrometric reference cones for laboratory use
BS EN 480-15:2023 Admixtures for concrete, mortar and grout — Test methods Part 15 : Reference concrete and method for testing viscosity modifying admixtures

Korean Agency for Technology and Standards (KATS), Double 85 test reference

KS B ISO 3452-3:2006 Non-destructive testing-Penetrant testing-Part 3:Reference test blocks
KS R 1140-2001(2016) Standard reference test specimens for calibratinga laboratory light exposure apparatus
KS R 1140-2001(2021) Standard reference test specimens for calibratinga laboratory light exposure apparatus
KS A 5608-3-2006 Accelerated life test－Part 3：Data analysis of accelerated life test
KS S ISO 9186-3-2016(2021) Graphical symbols ─ Test methods Part 3: Method for testing symbol referent association
KS M ISO 9727-2004(2009) Cylindrical stoppers of natural cork－Physical tests－Reference methods
KS P 1013-2010(2021) Standard reference materials for the quality control of antigen detection tests of Plasmodium falciparum malaria
KS P 1014-2010(2021) Standard reference materials for the quality control of antigen detection tests of Plasmodium vivax malaria
KS P 1013-2010(2016) Standard reference materials for the quality control of antigen detection tests of Plasmodium falciparum malaria
KS P 1014-2010(2016) Standard reference materials for the quality control of antigen detection tests of Plasmodium vivax malaria
KS P ISO 10993-8:2002 Biological evaluation of medical devices－Part 8：Selection and qualification of reference materials for biological tests
KS P ISO 10993-8:2007 Biological evaluation of medical devices－Part 8：Selection and qualification of reference materials for biological tests
KS M ISO 1431-3:2019 Rubber, vulcanized of thermoplastic — Resistance to ozone cracking — Part 3: Reference and alternative methods for determining the ozone concentration in laboratory test chambers
KS C IEC 61298-2:2003 Process measurement and control devices-General methods and procedures for evaluating performance-Part 2:Tests under reference conditions
KS P ISO 15193:2010 In vitro diagnostic medical devices-Measurement of quantities in samples of biological origin-Requirements for content and presentation of reference measurement procedures
KS C IEC 61298-2:2013 Process measurement and control devices－General methods and procedures for evaluating performance－Part 2：Tests under reference conditions
KS P ISO 15193:2014 In vitro diagnostic medical devices — Measurement of quantities in samples of biological origin — Requirements for content and presentation of reference measurement procedures
KS B 6005-1-2007 Reciprocating internal combustion engines-Performance-Part 1 : Standard reference conditions, declarations of power, fuel and lubricating oil consumptions, and test methods

Lithuanian Standards Office , Double 85 test reference

LST EN 480-1-2006+A1-2011 Admixtures for concrete, mortar and grout - Test methods - Part 1: Reference concrete and reference mortar for testing
LST EN 14845-1-2007 Test methods for fibres in concrete - Part 1: Reference concretes
LST EN 1766-2000 Products and systems for the protection and repair of concrete structures - Test methods - Reference concretes for testing
LST EN 12875-1-2005 Mechanical dishwashing resistance of utensils - Part 1: Reference test method for domestic articles
LST EN ISO 14577-3:2003 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 3: Calibration of reference blocks (ISO 14577-3:2002)
LST EN 15051-2006 Workplace atmospheres - Measurement of the dustiness of bulk materials - Requirements and reference test methods
LST EN 993-13-2001 Methods of test for dense shaped refractory products - Part 13: Specification for pyrometric reference cones for laboratory use
LST EN 480-13-2009+A1-2011 Admixtures for concrete, mortar and grout - Test methods - Part 13: Reference masonry mortar for testing mortar admixtures
LST EN 16128-2011 Reference test method for release of nickel from those parts of spectacle frames and sunglasses intended to come into close and prolonged contact with the skin
LST EN 13286-3-2003 Unbound and hydraulically bound mixtures - Part 3: Test methods for laboratory reference density and water content - Vibrocompression with controlled parameters
LST EN 1254-20-2021 Copper and copper alloys - Plumbing fittings - Part 20: Definitions, thread dimensions, test methods, reference data and supporting information
LST EN ISO 6508-3:2006 Metallic materials - Rockwell hardness test - Part 3: Calibration of reference blocks (scales A, B, C, D, E, F, G, H, K, N, T) (ISO 6508-3:2005)
LST EN 13286-5-2003 Unbound and hydraulically bound mixtures - Part 5: Test methods for laboratory reference density and water content - Vibrating table
LST EN 13286-4-2003 Unbound and hydraulically bound mixtures - Part 4: Test methods for laboratory reference density and water content - Vibrating hammer
LST EN 13286-2-2010 Unbound and hydraulically bound mixtures - Part 2: Test methods for laboratory reference density and water content - Proctor compaction
LST EN 13286-2-2010/AC-2013 Unbound and hydraulically bound mixtures - Part 2: Test methods for laboratory reference density and water content - Proctor compaction
LST EN 1811-2011+A1-2015 Reference test method for release of nickel from all post assemblies which are inserted into pierced parts of the human body and articles intended to come into direct and prolonged contact with the skin
LST EN 13286-1-2003 Unbound and hydraulically bound mixtures - Part 1: Test methods for laboratory reference density and water content - Introduction, general requirements and sampling

AENOR, Double 85 test reference

UNE-EN 480-1:2015 Admixtures for concrete, mortar and grout - Test methods - Part 1: Reference concrete and reference mortar for testing
UNE-EN 14845-1:2008 Test methods for fibres in concrete - Part 1: Reference concretes
UNE-EN 12875-1:2005 Mechanical dishwashing resistance of utensils - Part 1: Reference test method for domestic articles
UNE-EN 993-13:1996 Methods of test for dense shaped refractory products - Part 13: Specification for pyrometric reference cones for laboratory use
UNE-EN 302-7:2013 Adhesives for load-bearing timber structures - Test methods - Part 7: Determination of the working life under referenced conditions
UNE-EN ISO 20776-1:2007 Clinical laboratory testing and in vitro diagnostic test systems - Susceptibility testing of infectious agents and evaluation of performance of antimicrobial susceptibility test devices - Part 1: Reference method for testing the in vitro activity of antim
UNE-EN 16128:2011 Reference test method for release of nickel from those parts of spectacle frames and sunglasses intended to come into close and prolonged contact with the skin
UNE-EN 302-5:2013 Adhesives for load-bearing timber structures - Test methods - Part 5: Determination of maximum assembly time under referenced conditions
UNE-EN 302-6:2013 Adhesives for load-bearing timber structures - Test methods - Part 6: Determination of the minimum pressing time under referenced conditions
UNE-EN 13286-3:2003 Unbound and hydraulically bound mixtures - Part 3: Test methods for laboratory reference density and water content - Vibrocompression with controlled parameters
UNE-EN 13286-5:2003 Unbound and hydraulically bound mixtures - Part 5: Test methods for laboratory reference density and water content - Vibrating table
UNE-EN 13286-4:2003 Unbound and hydraulically bound mixtures - Part 4: Test methods for laboratory reference density and water content - Vibrating hammer
UNE-EN 13286-2:2011 Unbound and hydraulically bound mixtures - Part 2: Test methods for laboratory reference density and water content - Proctor compaction
UNE-EN ISO 16256:2013 Clinical laboratory testing and in vitro diagnostic test systems - Reference method for testing the in vitro activity of antimicrobial agents against yeast of fungi involved in infectious diseases (ISO 16256:2012)
UNE-EN 13286-1:2003 Unbound and hydraulically bound mixtures - Part 1: Test methods for laboratory reference density and water content - Introduction, general requirements and sampling
UNE-EN 15416-5:2017 Adhesives for load bearing timber structures other than phenolic and aminoplastic - Test methods - Part 5: Determination of minimum pressing time under referenced conditions
UNE-EN 15416-4:2017 Adhesives for load bearing timber structures other than phenolic and aminoplastic - Test methods - Part 4: Determination of open assembly time under referenced conditions

Danish Standards Foundation, Double 85 test reference

DS/EN 480-1+A1:2011 Admixtures for concrete, mortar and grout - Test methods - Part 1: Reference concrete and reference mortar for testing
DS 423.41/Bil.1:2002 Testing of concrete - Hardened concrete - Reference atlas on internal stability
DS 423.43/Bil.1:2002 Testing of concrete - Hardened concrete - Reference atlas on paste homogeneity
DS/EN 14845-1:2007 Test methods for fibres in concrete - Part 1: Reference concretes
DS/EN 1766:2000 Products and systems for the protection and repair of concrete structures - Test methods - Reference concretes for testing
DS/EN 12875-1:2005 Mechanical dishwashing resistance of utensils - Part 1: Reference test method for domestic articles
DS/EN 15051:2006 Workplace atmospheres - Measurement of the dustiness of bulk materials - Requirements and reference test methods
DS/EN 993-13:1995 Methods of test for dense shaped refractory products - Part 13: Specification for pyrometric reference cones for laboratory use
DS/EN 480-13+A1:2011 Admixtures for concrete, mortar and grout - Test methods - Part 13: Reference masonry mortar for testing mortar admixtures
DS/EN ISO 105-B08/A1:2009 Textiles - Tests for colour fastness - Part B08: Quality control of blue wool reference materials 1 to 7
DS/EN ISO 105-B08:1999 Textiles - Tests for colour fastness - Part B08: Quality control of blue wool reference materials 1 to 7
DS/EN 302-7:2013 Adhesives for load-bearing timber structures - Test methods - Part 7: Determination of the working life under referenced conditions
DS/EN 302-5:2013 Adhesives for load-bearing structures - Test methods - Part 5: Determination of maximum assembly time under referenced conditions
DS/EN 16128:2011 Reference test method for release of nickel from those parts of spectacle frames and sunglasses intended to come into close and prolonged contact with the skin
DS/EN 302-6:2013 Adhesives for load-bearing timber structures - Test methods - Part 6: Determination of the minimum pressing time under referenced conditions
DS/EN ISO 283:2007 Textile conveyor belts - Full thickness tensile strength, elongation at break and elongation at the reference load - Test method
DS/EN 13286-3:2003 Unbound and hydraulically bound mixtures - Part 3: Test methods for laboratory reference density and water content - Vibrocompression with controlled parameters
DS/EN 1254-20:2021 Copper and copper alloys – Plumbing fittings – Part 20: Definitions, thread dimensions, test methods, reference data and supporting information
DS/EN 13286-2:2011 Unbound and hydraulically bound mixtures - Part 2: Test methods for laboratory reference density and water content - Proctor compaction
DS/EN 13286-4:2003 Unbound and hydraulically bound mixtures - Part 4: Test methods for laboratory reference density and water content - Vibrating hammer
DS/EN 13286-5:2003 Unbound and hydraulically bound mixtures - Part 5: Test methods for laboratory reference density and water content - Vibrating table
DS/EN 13286-2/AC:2013 Unbound and hydraulically bound mixtures - Part 2: Test methods for laboratory reference density and water content - Proctor compaction
DS/EN 13286-1:2003 Unbound and hydraulically bound mixtures - Part 1: Test methods for laboratory reference density and water content - Introduction, general requirements and sampling

国家市场监督管理总局、中国国家标准化管理委员会, Double 85 test reference

GB/T 37285-2019 Reference fluids for compatibility testing of motor vehicle braking fluids

American Society for Testing and Materials (ASTM), Double 85 test reference

ASTM F2870-19 Standard Specification for 315/70R22.5 154/150L Radial Truck Standard Reference Test Tire
ASTM E1136-10 Standard Specification for P195/75R14 Radial Standard Reference Test Tire
ASTM D1368-89 Test Method for Trace Concentrations of Lead in Primary Reference Fuels
ASTM E1136-14 Standard Specification for P195/75R14 Radial Standard Reference Test Tire
ASTM E1337-90(2008) Standard Test Method for Determining Longitudinal Peak Braking Coefficient of Paved Surfaces Using Standard Reference Test Tire
ASTM E1136-17 Standard Specification for P195/75R14 Radial Standard Reference Test Tire
ASTM E1136-19 Standard Specification for P195/75R14 Radial Standard Reference Test Tire
ASTM F2493-14 Standard Specification for P225/60R16 97S Radial Standard Reference Test Tire
ASTM G5-14(2021) Standard Reference Test Method for Making Potentiodynamic Anodic Polarization Measurements
ASTM F2493-19 Standard Specification for P225/60R16 97S Radial Standard Reference Test Tire
ASTM E1724-95(2001) Standard Guide for Testing and Certification of Metal and Metal-Related Reference Materials
ASTM E1724-95 Standard Guide for Testing and Certification of Metal and Metal-Related Reference Materials
ASTM F2493-18 Standard Specification for P225/60R16 97S Radial Standard Reference Test Tire
ASTM F2493-20 Standard Specification for P225/60R16 97S Radial Standard Reference Test Tire
ASTM F2493-23 Standard Specification for P225/60R16 97S Radial Standard Reference Test Tire
ASTM E1337-90(2002) Standard Test Method for Determining Longitudinal Peak Braking Coefficient of Paved Surfaces Using a Standard Reference Test Tire
ASTM E1337-90(1996) Standard Test Method for Determining Longitudinal Peak Braking Coefficient of Paved Surfaces Using a Standard Reference Test Tire
ASTM E1337-90(2012) Standard Test Method for Determining Longitudinal Peak Braking Coefficient of Paved Surfaces Using Standard Reference Test Tire
ASTM E1921-18 Standard Test Method for Determination of Reference Temperature, To, for Ferritic Steels in the Transition Range
ASTM E1921-18a Standard Test Method for Determination of Reference Temperature, To, for Ferritic Steels in the Transition Range
ASTM E1921-19a Standard Test Method for Determination of Reference Temperature, To, for Ferritic Steels in the Transition Range
ASTM E1921-22 Standard Test Method for Determination of Reference Temperature, T0, for Ferritic Steels in the Transition Range
ASTM E1921-19 Standard Test Method for Determination of Reference Temperature, To, for Ferritic Steels in the Transition Range
ASTM E1921-19b Standard Test Method for Determination of Reference Temperature, To, for Ferritic Steels in the Transition Range
ASTM E1921-20 Standard Test Method for Determination of Reference Temperature, To, for Ferritic Steels in the Transition Range
ASTM E1921-17 Standard Test Method for Determination of Reference Temperature, To, for Ferritic Steels in the Transition Range
ASTM E1921-21a Standard Test Method for Determination of Reference Temperature, T0, for Ferritic Steels in the Transition Range
ASTM E1921-09c Standard Test Method for Determination of Reference Temperature, T_o, for Ferritic Steels in the Transition Range
ASTM E1921-09a Standard Test Method for Determination of Reference Temperature, T_o, for Ferritic Steels in the Transition Range
ASTM E1921-19be1 Standard Test Method for Determination of Reference Temperature, To, for Ferritic Steels in the Transition Range
ASTM G5-14e1 Standard Reference Test Method for Making Potentiodynamic Anodic Polarization Measurements
ASTM E1921-17a Standard Test Method for Determination of Reference Temperature, To, for Ferritic Steels in the Transition Range
ASTM G5-14 Standard Reference Test Method for Making Potentiodynamic Anodic Polarization Measurements
ASTM F2871-11 Standard Specification for 245/70R19.5 136/134M Radial Truck Standard Reference Test Tire
ASTM G5-13e2 Standard Reference Test Method for Making Potentiodynamic Anodic Polarization Measurements
ASTM F2871-16 Standard Specification for 245/70R19.5 136/134M Radial Truck Standard Reference Test Tire
ASTM F2870-11 Standard Specification for 315/70R22.5 154/150L Radial Truck Standard Reference Test Tire
ASTM G5-13 Standard Reference Test Method for Making Potentiodynamic Anodic Polarization Measurements
ASTM F2870-23 Standard Specification for 315/70R22.5 154/150L Radial Truck Standard Reference Test Tire
ASTM F2871-23 Standard Specification for 245/70R19.5 136/134M Radial Truck Standard Reference Test Tire
ASTM E1337-19 Standard Test Method for Determining Longitudinal Peak Braking Coefficient (PBC) of Paved Surfaces Using Standard Reference Test Tire
ASTM E973-02 Standard Test Method for Determination of the Spectral Mismatch Parameter Between a Photovoltaic Device and a Photovoltaic Reference Cell
ASTM G5-94 Standard Reference Test Method for Making Potentiostatic and Potentiodynamic Anodic Polarization Measurements
ASTM G5-94(1999) Standard Reference Test Method for Making Potentiostatic and Potentiodynamic Anodic Polarization Measurements
ASTM E816-15(2023) Standard Test Method for Calibration of Pyrheliometers by Comparison to Reference Pyrheliometers
ASTM D4575-09(2019) Standard Test Methods for Rubber Deterioration—Reference and Alternative Method(s) for Determining Ozone Level in Laboratory Test Chambers
ASTM F3611-22 Standard Specification for P225/60R16 97S Radial Low Tread Depth Standard Reference Test Tire
ASTM E1921-12 Standard Test Method for Determination of Reference Temperature, To, for Ferritic Steels in the Transition Range
ASTM E1921-13 Standard Test Method for Determination of Reference Temperature, To, for Ferritic Steels in the Transition Range
ASTM F2870-16 Standard Specification for 315/70R22.5 154/150L Radial Truck Standard Reference Test Tire
ASTM F3611-22e1 Standard Specification for P225/60R16 97S Radial Low Tread Depth Standard Reference Test Tire
ASTM F2870-19e1 Standard Specification for 315/70R22.5 154/150L Radial Truck Standard Reference Test Tire
ASTM D4678-11 Standard Practice for RubberPreparation, Testing, Acceptance, Documentation, and Use of Reference Materials
ASTM E1337-90 Standard Test Method for Determining Longitudinal Peak Braking Coefficient of Paved Surfaces Using a Standard Reference Test Tire
ASTM F847-94(1999) Standard Test Methods for Measuring Crystallographic Orientation of Flats on Single Crystal Silicon Wafers by X-Ray Techniques
ASTM E1921-15 Standard Test Method for Determination of Reference Temperature, To, for Ferritic Steels in the Transition Range
ASTM E948-95 Standard Test Method for Electrical Performance of Photovoltaic Cells Using Reference Cells Under Simulated Sunlight
ASTM E948-95(2001) Standard Test Method for Electrical Performance of Photovoltaic Cells Using Reference Cells Under Simulated Sunlight
ASTM D7330-11 Standard Test Method for Assessment of Surface Appearance Change in Pile Floor Coverings Using Standard Reference Scales
ASTM E1921-11a Standard Test Method for Determination of Reference Temperature, T_o, for Ferritic Steels in the Transition Range
ASTM G5-94(2011)e1 Standard Reference Test Method for Making Potentiostatic and Potentiodynamic Anodic Polarization Measurements
ASTM E2005-99 Standard Guide for Benchmark Testing of Reactor Dosimetry in Standard and Reference Neutron Fields
ASTM D3324-01a Standard Practice for Carbon Black—Improving Test Reproducibility Using ASTM Standard Reference Blacks
ASTM F1806-97(2008) Standard Practice for Tire Testing Operations-Basic Concepts and Terminology for Reference Tire Use
ASTM F1806-21 Standard Practice for Tire Testing Operations–Basic Concepts and Terminology for Reference Tire Use
ASTM E1921-23 Standard Test Method for Determination of Reference Temperature, T0, for Ferritic Steels in the Transition Range
ASTM E1337-90(2018) Standard Test Method for Determining Longitudinal Peak Braking Coefficient of Paved Surfaces Using Standard Reference Test Tire
ASTM F144-80(2005) Standard Practice for Making Reference Glass-Metal Sandwich Seal and Testing for Expansion Characteristics by Polarimetric Methods
ASTM F140-98 Standard Practice for Making Reference Glass-Metal Butt Seals and Testing for Expansion Characteristics by Polarimetric Methods
ASTM E1921-22a Standard Test Method for Determination of Reference Temperature, T0, for Ferritic Steels in the Transition Range
ASTM F140-98(2003) Standard Practice for Making Reference Glass-Metal Butt Seals and Testing for Expansion Characteristics by Polarimetric Methods
ASTM F140-98(2008) Standard Practice for Making Reference Glass-Metal Butt Seals and Testing for Expansion Characteristics by Polarimetric Methods
ASTM D7330-15 Standard Test Method for Assessment of Surface Appearance Change in Pile Floor Coverings Using Standard Reference Scales
ASTM F3107-14(2023) Standard Test Method for Measuring Accuracy After Mechanical Disturbances on Reference Frames of Computer Assisted Surgery Systems
ASTM D7330-22 Standard Test Method for Assessment of Surface Appearance Change in Pile Floor Coverings Using Standard Reference Scales
ASTM C1005-20 Standard Specification for Reference Masses and Devices for Determining Mass and Volume for Use in Physical Testing of Hydraulic Cements
ASTM E207-21 Standard Test Method for Thermal EMF Test of Single Thermoelement Materials by Comparison With Reference Thermoelement of Similar EMF-Temperature Properties
ASTM D8183-22 Standard Test Method for Determination of Indicated Cetane Number (ICN) of Diesel Fuel Oils using a Constant Volume Combustion Chamber—Reference Fuels Calibration Method
ASTM D8183-18 Standard Test Method for Determination of Indicated Cetane Number (ICN) of Diesel Fuel Oils using a Constant Volume Combustion Chamber—Reference Fuels Calibration Method
ASTM E2972-15 Standard Guide for Production, Testing, and Value Assignment of In-House Reference Materials for Metals, Ores, and Other Related Materials
ASTM D7911-19 Standard Guide for Using Reference Material to Characterize Measurement Bias Associated with Volatile Organic Compound Emission Chamber Test
ASTM D7911-14 Standard Guide for Using Reference Material to Characterize Measurement Bias Associated with Volatile Organic Compound Emission Chamber Test
ASTM F3107-14 Standard Test Method for Measuring Accuracy after Mechanical Disturbances on Reference Frames of Computer Assisted Surgery Systems
ASTM F144-80(2010) Standard Practice for Making Reference Glass-Metal Sandwich Seal and Testing for Expansion Characteristics by Polarimetric Methods

Professional Standard - Traffic, Double 85 test reference

JTS/T 274-1-2011 Reference Norm on Numerical Model Test of Port and Waterway Engineering

IN-BIS, Double 85 test reference

IS 10000 Pt.2-1980

Military Standard of the People's Republic of China-General Armament Department, Double 85 test reference

GJB 4843-2003 Design and finalization test procedures for shipborne strapdown vertical reference datum

International Organization for Standardization (ISO), Double 85 test reference

ISO 389-6:2007 Acoustics - Reference zero for the calibration of audiometric equipment - Part 6: Reference threshold of hearing for test signals of short duration
ISO 12715:2014 Non-destructive testing - Ultrasonic testing - Reference blocks and test procedures for the characterization of contact probe sound beams
ISO 4545-3:2005 Metallic materials - Knoop hardness test - Part 3: Calibration of reference blocks
ISO 4545-3:2017 Metallic materials - Knoop hardness test- Part 3:Calibration of reference blocks
ISO 6506-3:2014 Metallic materials — Brinell hardness test — Part 3: Calibration of reference blocks
ISO/FDIS 6508-3:2023 Metallic materials — Rockwell hardness test — Part 3: Calibration of reference blocks
ISO/DIS 6506-3:2023 Metallic materials — Brinell hardness test — Part 3: Calibration of reference blocks
ISO 6508-3:2022 Metallic materials — Rockwell hardness test — Part 3: Calibration of reference blocks
ISO/CD 14577-3:2023 Metallic materials — Instrumented indentation test for hardness and materials parameters — Part 3: Calibration of reference blocks
ISO 8714:2023 Electric road vehicles — Reference energy consumption and range — Test procedures for passenger cars and light commercial vehicles
ISO/FDIS 8714 Electric road vehicles — Reference energy consumption and range — Test procedures for passenger cars and light commercial vehicles
ISO 121:1980 Magnesium-aluminium-zinc alloy ingots and alloy castings; Chemical composition and mechanical properties of sand cast reference test bars
ISO 15193:2002 In vitro diagnostic medical devices - Measurement of quantities in samples of biological origin - Presentation of reference measurement procedures
ISO 20776-2:2021 Clinical laboratory testing and in vitro diagnostic test systems — Susceptibility testing of infectious agents and evaluation of performance of antimicrobial susceptibility test devices — Part 2: Eval
ISO 1431-3:2017 Rubber, vulcanized or thermoplastic — Resistance to ozone cracking — Part 3: Reference and alternative methods for determining the ozone concentration in laboratory test chambers
ISO 20776-1:2019 Clinical laboratory testing and in vitro diagnostic test systems — Susceptibility testing of infectious agents and evaluation of performance of antimicrobial susceptibility test devices — Part 1: Refe
ISO 105-C08:2001 Textiles - Tests for colour fastness - Part C08: Colour fastness to domestic and commercial laundering using a non-phosphate reference detergent incorporating a low temperature bleach activator

Japanese Industrial Standards Committee (JISC), Double 85 test reference

JIS Z 2353:1991 Methods for measurement on ultrasonic velocity of solid by pulse technique using reference test pieces
JIS C 6122-4-1:2013 Optical amplifiers.Test methods.Part 4-1: Transient parameters.Measurement of gain parameters using two-wavelength method
JIS K 6377-7:2022 Conveyor belts -- Full thickness tensile strength, elongation at break and elongation at the reference load -- Test method

BE-NBN, Double 85 test reference

International Telecommunication Union (ITU), Double 85 test reference

ITU-T G.723.1 ANNEX B, SOFTWARE-1996 C reference code and test signals for the floating point 5.3 and 6.3 kbit/s dual rate speech coder, version 5.1F
ITU-T G.723.1 BODY AND ANNEX A, SOFTWARE-1996 C reference code, test signals and test sequences for the fixed point 5.3 and 6.3 kbit/s dual rate speech coder and for silence compression scheme, version 5.1

International Electrotechnical Commission (IEC), Double 85 test reference

IEC TR3 60792-2:1993 The multi-factor functional testing of electrical insulation systems; part 2: bibliography
IEC 60512-26-100:2008/AMD1:2011 Connectors for electronic equipment - Tests and measurements - Part 26-100: Measurement setup, test and reference arrangements and measurements for connectors according to IEC 60603-7 - Tests 26a to 2
IEC 60512-26-100:2008 Connectors for electronic equipment - Tests and measurements - Part 26-100: Measurement setup, test and reference arrangements and measurements for connectors according to IEC 60603-7 - Tests 26a to 26g
IEC 60512-26-100:2008+AMD1:2011 CSV Connectors for electronic equipment - Tests and measurements - Part 26-100: Measurement setup, test and reference arrangements and measurements for connectors according to IEC 60603-7 - Tests 26a to 2
IEC 60512-26-100:2011 Connectors for electronic equipment - Tests and measurements - Part 26-100: Measurement setup, test and reference arrangements and measurements for connectors according to IEC 60603-7 - Tests 26a to 26g
IEC 61298-2:1995 Process measurement and control devices - General methods and procedures for evaluating performance - Part 2: Tests under reference conditions
IEC 61298-2:2008 Process measurement and control devices - General methods and procedures for evaluating performance - Part 2: Tests under reference conditions
IEC 62828-4:2020 Reference conditions and procedures for testing industrial and process measurement transmitters - Part 4: Specific procedures for level transmitters

Natural Gas Processor's Association (NGPA), Double 85 test reference

GPA RB-181-1986 Tentative Reference Bulletin Heating Value as a Basis for Custody Transfer of Natural Gas

ZA-SANS, Double 85 test reference

SANS 14577-3:2009 Metallic materials - Instrumented indentation test for hardness and materials parameters Part 3: Calibration of reference blocks
SANS 12715:2004 Ultrasonic non-destructive testing - Reference blocks and test procedures for the characterization of contact search unit beam profiles
SANS 6508-3:2009 Metallic materials - Rockwell hardness test Part 3: Calibration of reference blocks (scales A,B,C,D,E,F,G,H,K,N,T)

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Double 85 test reference

GB/T 11259-2008 Non-destructive testing.Practice for fabrication and control of steel reference blocks used in ultrasonic testing
GB/T 18852-2002 Ultrasonic non-destructive testing--Reference blocks and test procedures for the characterization of contact search unit beam profiles
GB/T 3690-2009 Textile conveyor belts-Full thickness tensile strength,elongation at break and elongation at the reference load-Test method

HU-MSZT, Double 85 test reference

MSZ 804-1984

IEEE - The Institute of Electrical and Electronics Engineers@ Inc., Double 85 test reference

IEEE 3-1982 RECOMMENDED PRACTICE IN THE SELECTION OF REFERENCE AMBIENT CONDITIONS FOR TEST MEASUREMENTS OF ELECTRICAL APPARATUS

Professional Standard - Chemical Industry, Double 85 test reference

HG/T 2101-1991 Test and parameter measurement method of single-stage cantilever double-acting liquid ring chlorine pump

RU-GOST R, Double 85 test reference

GOST R 55108-2012 The Global navigation satellite systems. Maritime differential subsystems. Reference station. General requirements, test methods and required test results
GOST R 8.906-2015 State system for ensuring the uniformity of measurements. Indication pressure gauges. Reference measuring instruments. Metrological requirements and test methods
GOST R IEC 61298-2-2015 Process measurement and control devices. General methods and procedures for evaluating performance. Part 2. Test under reference conditions

CEN - European Committee for Standardization, Double 85 test reference

EN 15051:2006 Workplace atmospheres - Measurement of the dustiness of bulk materials - Requirements and reference test methods
EN 13286-2:2004 Unbound and hydraulically bound mixtures - Part 2: Test methods for the determination of the laboratory reference density and water content - Proctor compaction
EN 13286-2-2010E Unbound and hydraulically bound mixtures - Part 2: Test methods for the determination of the laboratory reference density and water content - Proctor compaction
EN 4050-3:2012 Aerospace series - Test method for metallic materials - Ultrasonic inspection of bars@ plates@ forging stock and forgings - Part 3: Reference blocks
EN ISO 20776-1:2006 Clinical laboratory testing and in vitro diagnostic test systems - Susceptibility testing of infectious agents and evaluation of performance of antimicrobial susceptibility test devices - Part 1: Reference method for testing the in vitro activity of antim

Malaysia Standards, Double 85 test reference

MS 954 Pt.10-1986

European Committee for Electrotechnical Standardization（CENELEC）, Double 85 test reference

EN 61290-4-1:2011 Optical amplifiers - Test methods - Part 4-1: Gain transient parameters - Two-wavelength method
EN 61290-4-1:2016 Optical amplifiers - Test methods - Part 4-1: Gain transient parameters - Two-wavelength method
EN 60512-26-100:2008 Connectors for electronic equipment - Tests and measurements - Part 26-100: Measurement setup, test and reference arrangements and measurements for connectors according to IEC 60603-7 - Tests 26a to 26g (Incorporates Amendment A1: 2011)

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, Double 85 test reference

PREN 2003-15-1995 Aerospace Series Test Methods for Metallic Materials Ultrasonic Testing Part 15 : Reference Blocks (Edition P1)
PREN 4050-3-1996 Aerospace Series Test Method for Metallic Materials Ultrasonic Inspection of Bars@ Plates@ Forging Stock and Forgings Part 3: Reference Blocks (Edition P 1)

ES-UNE, Double 85 test reference

UNE-EN 480-13:2015 Admixtures for concrete, mortar and grout - Test methods - Part 13: Reference masonry mortar for testing mortar admixtures
UNE-EN 4050-3:2012 Aerospace series - Test method for metallic materials - Ultrasonic inspection of bars, plates, forging stock and forgings - Part 3: Reference blocks (Endorsed by AENOR in November of 2012.)
UNE-EN 13286-2:2011/AC:2012 Unbound and hydraulically bound mixtures - Part 2: Test methods for laboratory reference density and water content - Proctor compaction
UNE-EN 13286-4:2022 Unbound and hydraulically bound mixtures - Part 4: Test methods for laboratory reference density and water content - Vibrating hammer
UNE-EN 2004-7:2017 Aerospace series - Test methods for aluminium and aluminium alloy products - Part 7: Reference blocks for the calibration of measuring equipment used in the determination of electrical conductivity of wrought aluminium and aluminium alloys (Endorsed by...
UNE-EN ISO 16256:2021 Clinical laboratory testing and in vitro diagnostic test systems - Broth micro-dilution reference method for testing the in vitro activity of antimicrobial agents against yeast fungi involved in infectious diseases (ISO 16256:2021) (Endorsed by Asociac...
UNE-EN 13286-1:2022 Unbound and hydraulically bound mixtures - Part 1: Test methods for laboratory reference density and water content - Introduction, general requirements and sampling

Institute of Electrical and Electronics Engineers (IEEE), Double 85 test reference

IEEE 1029.1-1998 VHDL waveform and vector exchange to support design and test verification (WAVES) language reference manual

Standard Association of Australia （SAA）, Double 85 test reference

AS/NZS 3580.2.2:2009
AS 1289.5.4.3:2006 Methods of testing soils for engineering purposes - Soil compaction and density tests - Compaction control test - Dry density ratio and moisture ratio using statistical selection of reference values

European Association of Aerospace Industries, Double 85 test reference

AECMA PREN 4050-3-1996 Aerospace Series Test Method for Metallic Materials Ultrasonic Inspection of Bars, Plates, Forging Stock and Forgings Part 3: Reference Blocks Edition P 1

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Double 85 test reference

GB/T 3690-2017 Textile conveyor belts—Full thickness tensile strength,elongation at break and elongation at the reference load—Test method

AT-ON, Double 85 test reference

OENORM EN 302-7-2021 Adhesives for load-bearing timber structures - Test methods - Part 7: Determination of the working life under referenced conditions
OENORM EN 302-5-2021 Adhesives for load-bearing timber structures - Test methods - Part 5: Determination of maximum assembly time under referenced conditions
OENORM EN 302-6-2021 Adhesives for load-bearing timber structures - Test methods - Part 6: Determination of the minimum pressing time under referenced conditions
OENORM EN 1254-20-2021 Copper and copper alloys - Plumbing fittings - Part 20: Definitions, thread dimensions, test methods, reference data and supporting information

Association of German Mechanical Engineers, Double 85 test reference

VDI/VDE/DGQ 2618 Blatt 4.4-2009 Inspection of measuring and test equipment - Test instruction for reference gauges with plane-parallel or spherical measuring faces and for spherical-end gauges and internal callipers

API - American Petroleum Institute, Double 85 test reference

API PUBL 4362-1983 Inter- and Intralaboratory Variation In Conducting Static Acute Toxicity Tests with Daphnia Magna Exposed To Effluents and Reference Toxicants

Underwriters Laboratories (UL), Double 85 test reference

UL 1703 CRD-2010 UL Standard for Safety Flat-Plate Photovoltaic Modules and Panels - Section / Paragraph Reference: 41.1 Subject: Mechanical Loading Test Deflection Parameter (Edition 3: June 30@ 2004)
UL 790 CRD-2013 Section / Paragraph Reference: 4.4.1 Subject: Preparation / Application of Test Samples (Edition 8: April 22, 2004)

KR-KS, Double 85 test reference

KS P ISO 10993-8-2002 Biological evaluation of medical devices－Part 8：Selection and qualification of reference materials for biological tests
KS M ISO 1431-3-2019 Rubber, vulcanized of thermoplastic — Resistance to ozone cracking — Part 3: Reference and alternative methods for determining the ozone concentration in laboratory test chambers
KS P ISO 16256-2022 Clinical laboratory testing and in vitro diagnostic test systems — Broth micro-dilution reference method for testing the in vitro activity of antimicrobial agents against yeast fungi involved in infec

IT-UNI, Double 85 test reference

UNI EN 1254-20-2021 Copper and copper alloys - Plumbing fittings - Part 20: Definitions, thread dimensions, test methods, reference data and supporting information

PL-PKN, Double 85 test reference

PN-EN 1254-20-2021-10 E Copper and copper alloys -- Plumbing fittings -- Part 20: Definitions, thread dimensions, test methods, reference data and supporting information
PN-EN ISO 20776-1-2021-01 E Susceptibility testing of infectious agents and evaluation of performance of antimicrobial susceptibility test devices -- Part 1: Broth micro-dilution reference method for testing the in vitro activity of antimicrobial agents against rapidly growing aerob

U.S. Military Regulations and Norms, Double 85 test reference

ARMY MIL-HDBK-1264-1998 RADIOGRAPHIC INSPECTION FOR SOUNDNESS OF WELDS IN STEEL BY COMPARSION TO GRADED ASTM E390 REFERENCE RADIOGRAPHS

GOSTR, Double 85 test reference

GOST R ISO 20776-1-2010 Clinical laboratory testing and in vitro diagnostic test systems. Susceptibility testing of infectious agents and evaluation of performance of antimicrobial susceptibility test devices. Part 1. Reference method for testing the in vitro activity of antimic

Alliance of Telecommunications Industry Solutions （ATIS), Double 85 test reference

ATIS 0300022-2011 Next Generation Interconnection Interoperability (NGIIF) Reference Document: Part III, Installation, Testing and Maintenance Responsibilities for SS7 Links and Trunks Attachment K, Dual STP Failure Prevention Procedures (Formerly NIIF 5017)

ATIS - Alliance for Telecommunications Industry Solutions, Double 85 test reference

0300022-2009 Network Interconnection Interoperability (NIIF) Reference Document Part III@ Installation@ Testing and Maintenance Responsibilities for SS7 Links and Trunks Attachment K Dual STP Failure Prevention Procedures (Formerly NIIF 5017) (Version 11.0)
0300022-2011 Next Generation Interconnection Interoperability (NGIIF) Reference Document: Part III@ Installation@ Testing and Maintenance Responsibilities for SS7 Links and Trunks Attachment K@ Dual STP Failure Prevention Procedures (Formerly NIIF 5017) (Version 12.0)
0300022-2008 Network Interconnection Interoperability (NIIF) Reference Document Part III@ Installation@ Testing and Maintenance Responsibilities for SS7 Links and Trunks Attachment K Dual STP Failure Prevention Procedures (Formerly NIIF 5017) (Version 10.1)