ZH
RU
ES

Double 85 Test Reference

Double 85 Test Reference, Total:413 items.

In the international standard classification, Double 85 Test Reference involves: Non-destructive testing, Protection against fire, Products of the chemical industry, Electricity. Magnetism. Electrical and magnetic measurements, Telecommunication systems, Noise with respect to human beings, Environmental testing, Testing of metals, Aerospace fluid systems and components, Construction materials, Meat, meat products and other animal produce, Road engineering, Electronic tubes, Materials for aerospace construction, Semiconducting materials, Earthworks. Excavations. Foundation construction. Underground works, Air quality, Headgear. Clothing accessories. Fastening of clothing, Analytical chemistry, Components and accessories for telecommunications equipment, Solar energy engineering, Medical equipment, Fluid power systems, Road vehicle systems, Laboratory medicine, Nuclear energy engineering, Radiation measurements, Medical sciences and health care facilities in general, Rubber, Tea. Coffee. Cocoa, Equipment for the chemical industry, Fibre optic communications, Cereals, pulses and derived products, Industrial automation systems, Structures of buildings, Products of the textile industry, Electromechanical components for electronic and telecommunications equipment, Pipeline components and pipelines, Metrology and measurement in general, Refractories, Adhesives, Electromagnetic compatibility (EMC), Seals, glands, Photography, Internal combustion engines, Milk and milk products, Applications of information technology, Measurement of volume, mass, density, viscosity, Thermodynamics and temperature measurements.

YU-JUS, Double 85 Test Reference

JUS N.R1.471-1985 Bipolar transistors. Reference methods of measurement

International Telecommunication Union (ITU), Double 85 Test Reference

ITU-T O.6 SPANISH-1988 1020 Hz REFERENCE TEST FREQUENCY
ITU-T O.6 FRENCH-1988 1020 Hz Reference Test Frequency
ITU-T G.723.1 ANNEX B, SOFTWARE-1996 C reference code and test signals for the floating point 5.3 and 6.3 kbit/s dual rate speech coder, version 5.1F
ITU-T G.723.1 BODY AND ANNEX A, SOFTWARE-1996 C reference code, test signals and test sequences for the fixed point 5.3 and 6.3 kbit/s dual rate speech coder and for silence compression scheme, version 5.1
ITU-R BT.1729-2005 Common 16 × 9/4 × 3 aspect ratio digital television reference test pattern
ITU-T O.6-1988 1020 Hz REFERENCE TEST FREQUENCY
ITU-R BT.1729 FRENCH-2005 Common 16 × 9/4 × 3 aspect ratio digital television reference test pattern
ITU-R BT.1729 SPANISH-2005 Common 16 × 9/4 × 3 aspect ratio digital television reference test pattern
ITU-T G.723.1 ANNEX C, SOFTWARE-1996 C reference code and test signals for the scalable channel codec, version 3.1
ITU-T Q.3933-2015 Reference benchmarking, background traffic profiles and KPIs for VoIP and FoIP in fixed networks (Study Group 11)
ITU-T K.84 AMD 1-2014 Test methods and guide against information leaks through unintentional electromagnetic emissions - Deletion of a bibliographic reference

TIA - Telecommunications Industry Association, Double 85 Test Reference

TIA/EIA/IS-102.BABC-1996 APCO Project 25 Vocoder Reference Test
TSB63-1993 Reference Guide for Fiber Optic Test Procedures (Replaces CB9-F)
TIA/EIA-455-221-2001 FOTP-221-IEC 61290-5-1 - Optical Fiber Amplifiers - Basic Specification - Part 5-1: Test Method for Reflectance Parameters - Optical Spectrum Analyzer (Please refer to IEC 61290-5-1)

British Standards Institution (BSI), Double 85 Test Reference

BS EN ISO 3452-3:2013 Non-destructive testing. Penetrant testing. Reference test blocks
BS EN ISO 389-9:2010 Acoustics. Reference zero for the calibration of audiometric equipment. Preferred test conditions for the determination of reference hearing threshold levels
BS EN ISO 389-9:2009 Acoustics - Reference zero for the calibration of audiometric equipment - Preferred test conditions for the determination of reference hearing threshold levels
BS EN 60068-4:1996 Environmental testing. Information for specification writers. Test summaries
BS EN ISO 16859-3:2015 Metallic materials. Leeb hardness test - Calibration of reference test blocks
21/30442376 DC BS EN 480-1. Admixtures for concrete, mortar and grout. Test methods. Part 1. Reference concrete and reference mortar for testing
BS 4401-2:1980 Methods of test for meat and meat products. Determination of nitrogen content (reference method)
BS 4401-3:1997 Methods of test for meat and meat products. Determination of moisture content (reference method)
BS 4401-14:1979 Methods of test for meat and meat products. Determination of L-(+)-glutamic acid content (reference method)
BS EN ISO 4545-3:2017 Tracked Changes. Metallic materials. Knoop hardness test. Calibration of reference blocks
BS EN ISO 6508-3:2015 Tracked Changes. Metallic materials. Rockwell hardness test. Calibration of reference blocks
BS EN ISO 6507-3:2018 Tracked Changes. Metallic materials. Vickers hardness test. Calibration of reference blocks
BS EN 12697-9:2002 Bituminous mixtures - Test methods for hot mix asphalt - Determination of the reference density
BS EN IEC 61853-4:2018 Photovoltaic (PV) module performance testing and energy rating - Standard reference climatic profiles
BS 5752-3:1983 Methods of test for coffee and coffee products. Coffee: determination of caffeine content (reference method)
BS EN 12286:1999(2001) In vitro diagnostic medical devices - Measurement of quantities in samples of biological origin - Presentation of reference measurement procedures
BS EN 12286:1999 In vitro diagnostic medical devices - Measurement of quantities in samples of biological origin - Presentation of reference measurement procedures
BS 4317-2:1987 Methods of test for cereals and pulses. Determination of moisture content of cereals and cereal products (reference method)
BS PD CEN/TS 16677:2014 Ophthalmic optics. Reference method for the testing of spectacle frames and sunglasses for nickel release
BS EN 16128:2015 Ophthalmic optics. Reference method for the testing of spectacle frames and sunglasses for nickel release
22/30445434 DC BS EN ISO 6508-3. Metallic materials. Rockwell hardness test - Part 3. Calibration of reference blocks
BS EN 1766:2017 Tracked Changes. Products and systems for the protection and repair of concrete structures. Test methods. Reference concretes for testing
12/30246414 DC BS ISO 12715. Non-destructive testing. Ultrasonic testing. Reference blocks and test procedures for the characterization of contact probe sound beams
BS EN 15051-2:2013 Workplace exposure. Measurement of the dustiness of bulk materials. Rotating drum method
BS EN 15051:2006 Workplace atmospheres - Measurement of the dustiness of bulk materials - Requirements and reference test methods
BS EN IEC 62828-2:2018 Reference conditions and procedures for testing industrial and process measurement transmitters - Specific procedures for pressure transmitters
BS EN IEC 62828-5:2020 Reference conditions and procedures for testing industrial and process measurement transmitters. Specific procedures for flow transmitters
BS EN IEC 62828-3:2018 Reference conditions and procedures for testing industrial and process measurement transmitters - Specific procedures for temperature transmitters
BS EN ISO 389-6:2007 Acoustics - Reference zero for the calibration of audiometric equipment - Reference threshold of hearing for test signals of short duration
BS EN 1254-20:2021 Copper and copper alloys. Plumbing fittings. Definitions, thread dimensions, test methods, reference data and supporting information
BS EN IEC 62828-1:2018 Reference conditions and procedures for testing industrial and process measurement transmitters - General procedures for all types of transmitters
BS EN 13286-3:2003 Unbound and hydraulically bound mixtures - Test methods for laboratory reference density and water content - Vibrocompression with controlled parameters
BS EN 480-13:2015 Tracked Changes. Admixtures for concrete, mortar and grout. Test methods. Reference masonry mortar for testing mortar admixtures
BS EN ISO 11699-2:2018 Tracked Changes. Non-destructive testing. Industrial radiographic films. Control of film processing by means of reference values
BS 5752-13:1995 Methods of test for coffee and coffee products. Roasted ground coffee. Determination of moisture content. Karl Fischer method (reference method)
BS EN 60512-26-100:2008 Connectors for electronic equipment — Tests and measurements — Part 26-100: Measurement setup, test and reference arrangements and measurements for connectors according to IEC 60603-7 — Tests 26a to 26g
BS EN 60512-26-100:2009 Connectors for electronic equipment. Tests and measurements. Measurement setup, test and reference arrangements and measurements for connectors according to IEC 60603-7. Tests 26a to 26g
BS EN ISO 14096-1:2020 Non-destructive testing. Qualification of radiographic film digitisation systems - Definitions, quantitative measurements of image quality parameters, standard reference film and qualitative control
BS EN IEC 62828-4:2020 Reference conditions and procedures for testing industrial and process measurement transmitters. Part 4: Specific procedures for level transmitters

CZ-CSN, Double 85 Test Reference

CSN 85 6220 Za-1987
CSN 85 6170 Za-1988
CSN 01 1616-1989 Noise. Reference sound source. Technical conditions and testing methods
CSN 58 8782-1994 Methods of test for fats and oils Determination of unsaponifiable matter. Part 1: Method using diethyl ether extraction (reference method)
CSN 85 6209 Za-1987

(U.S.) Telecommunications Industries Association , Double 85 Test Reference

TIA TSB63-1993 Reference Guide for Fiber Optic Test Procedures
TIA/EIA-102.BABC-1999 Project 25 Vocoder Reference Test

European Committee for Standardization (CEN), Double 85 Test Reference

EN ISO 3452-3:2013 Non-destructive testing - Penetrant testing - Part 3: Reference test blocks
EN 16128:2015 Ophthalmic optics - Reference method for the testing of spectacle frames and sunglasses for nickel release
EN ISO 16256:2021 Clinical laboratory testing and in vitro diagnostic test systems - Broth micro-dilution reference method for testing the in vitro activity of antimicrobial agents against yeast fungi involved in infectious diseases (ISO 16256:2021)
EN ISO 16256:2012 Clinical laboratory testing and in vitro diagnostic test systems - Reference method for testing the in vitro activity of antimicrobial agents against yeast of fungi involved in infectious diseases (ISO 16256:2012)
EN ISO 16859-3:2015 Metallic materials - Leeb hardness test - Part 2: Verification and calibration of the testing devices
EN 1766:2017 Products and Systems for the Protection and Repair of Concrete Structures - Test Methods - Reference Concretes for Testing
EN 12697-9:2002 Bituminous Mixtures Test Methods for Hot Mix Asphalt - Part 9: Determination of the Reference Density
EN 1810:1998 Body-Piercing Post Assemblies - Reference Test Method for Determination of Nickel Content by Flame Atomic Absorption Spectrometry
EN 993-13:1995 Methods of test for dense shaped refractory products - Part 13: Specification for pyrometric reference cones for laboratory use
prEN 302-7-2021 Adhesives for load-bearing timber structures - Test methods - Part 7: Determination of the working life under referenced conditions
EN 302-7:2023 Adhesives for load-bearing timber structures - Test methods - Part 7: Determination of the working life under referenced conditions
EN 480-15:2023 Admixtures for concrete, mortar and grout - Test methods - Part 15: Reference concrete and method for testing viscosity modifying admixtures
EN 13286-3:2003 Unbound and hydraulically bound mixtures - Part 3: Test methods for laboratory reference density and water content; Vibrocompression with controlled parameters

German Institute for Standardization, Double 85 Test Reference

DIN EN 14390:2007-04 Fire test - Large-scale room reference test for surface products; German version EN 14390:2007
DIN 4882:2023-06 Non-destructive testing - Electromagnetic test methods - Reference blocks for grinding burns testing / Note: Date of issue 2023-05-19*Intended as replacement for DIN SPEC 4882 (2016-11).
DIN EN ISO 3452-3:2014-03 Non-destructive testing - Penetrant testing - Part 3: Reference test blocks (ISO 3452-3:2013); German version EN ISO 3452-3:2013
DIN EN ISO 389-9:2009-12 Acoustics - Reference zero for the calibration of audiometric equipment - Part 9: Preferred test conditions for the determination of reference hearing threshold levels (ISO 389-9:2009); German version EN ISO 389-9:2009
DIN EN ISO 389-6:2007 Acoustics - Reference zero for the calibration of audiometric equipment - Part 6: Reference threshold of hearing for test signals of short duration (ISO 389-6:2007); English version of DIN EN ISO 389-6:2007-10
DIN EN ISO 16859-3:2016-02 Metallic materials - Leeb hardness test - Part 3: Calibration of reference test blocks (ISO 16859-3:2015); German version EN ISO 16859-3:2015
DIN EN ISO 389-6:2007-10 Acoustics - Reference zero for the calibration of audiometric equipment - Part 6: Reference threshold of hearing for test signals of short duration (ISO 389-6:2007); German version EN ISO 389-6:2007
DIN EN ISO 6507-3:2018-07 Metallic materials - Vickers hardness test - Part 3: Calibration of reference blocks (ISO 6507-3:2018); German version EN ISO 6507-3:2018
DIN EN ISO 6508-3:2015-06 Metallic materials - Rockwell hardness test - Part 3: Calibration of reference blocks (ISO 6508-3:2015); German version EN ISO 6508-3:2015 / Note: To be replaced by DIN EN ISO 6508-3 (2022-12).
DIN EN ISO 4545-3:2018-07 Metallic materials - Knoop hardness test - Part 3: Calibration of reference blocks (ISO 4545-3:2017); German version EN ISO 4545-3:2018
DIN EN ISO 6508-3:2022-12 Metallic materials - Rockwell hardness test - Part 3: Calibration of reference blocks (ISO/DIS 6508-3:2022); German and English version prEN ISO 6508-3:2022 / Note: Date of issue 2022-11-18*Intended as replacement for DIN EN ISO 6508-3 (2015-06).
DIN EN ISO 6506-3:2015-02 Metallic materials - Brinell hardness test - Part 3: Calibration of reference blocks (ISO 6506-3:2014); German version EN ISO 6506-3:2014
DIN EN 16128:2016-02 Ophthalmic optics - Reference method for the testing of spectacle frames and sunglasses for nickel release; German version EN 16128:2015
DIN EN 1766:2017-05 Products and systems for the protection and repair of concrete structures - Test methods - Reference concretes for testing; German version EN 1766:2017 / Note: DIN EN 1766 (2000-03) remains valid alongside this standard until 2018-11-30.
DIN EN ISO 3452-3:2014 Non-destructive testing - Penetrant testing - Part 3: Reference test blocks (ISO 3452-3:2013); German version EN ISO 3452-3:2013
DIN EN 12875-1:2005-08 Mechanical dishwashing resistance of utensils - Part 1: Reference test method for domestic articles; German version EN 12875-1:2005
DIN EN 61290-4-1:2017-06 Optical amplifiers - Test methods - Part 4-1: Gain transient parameters - Two-wavelength method (IEC 61290-4-1:2016); German version EN 61290-4-1:2016 / Note: DIN EN 61290-4-1 (2012-04) remains valid alongside this standard until 2019-10-31.
DIN EN ISO 6506-3:2023-11 Metallic materials - Brinell hardness test - Part 3: Calibration of reference blocks (ISO/DIS 6506-3:2023); German and English version prEN ISO 6506-3:2023 / Note: Date of issue 2023-10-13*Intended as replacement for DIN EN ISO 6506-3 (2015-02).
DIN EN ISO 105-B08:2010-02 Textiles - Tests for colour fastness - Part B08: Quality control of blue wool reference materials 1 to 7 (ISO 105-B08:1995 + Amd 1:2009); German version EN ISO 105-B08:1999 + A1:2009
DIN 43751-4:1990-06 Measurement and control; digital measuring instruments; instruments for measuring time reference quantities; definitions, tests and data sheet details / Note: Applies in conjunction with DIN 43751-1 (1987-05).
DIN EN 302-7:2023-05 Adhesives for load-bearing timber structures - Test methods - Part 7: Determination of the working life under referenced conditions; German version EN 302-7:2023
DIN EN 61298-2:2009-08 Process measurement and control devices - General methods and procedures for evaluating performance - Part 2: Tests under reference conditions (IEC 61298-2:2008); German version EN 61298-2:2008
DIN EN 480-15:2021-12 Admixtures for concrete, mortar and grout - Test methods - Part 15: Reference concrete and method for testing viscosity modifying admixtures; German and English version prEN 480-15:2021 / Note: Date of issue 2021-11-12*Intended as replacement for DIN E...
DIN EN 480-15:2013-06 Admixtures for concrete, mortar and grout - Test methods - Part 15: Reference concrete and method for testing viscosity modifying admixtures; German version EN 480-15:2013 / Note: To be replaced by DIN EN 480-15 (2021-12).
DIN EN 13286-3:2003-07 Unbound and hydraulically bound mixtures - Part 3: Test methods for laboratory reference density and water content; Vibrocompression with controlled parameters; German version EN 13286-3:2003
DIN EN IEC 62828-5:2022-08 Reference conditions and procedures for testing industrial and process measurement transmitters - Part 5: Specific procedures for flow transmitters (IEC 62828-5:2020); German version EN IEC 62828-5:2020
DIN EN IEC 62828-2:2018-11 Reference conditions and procedures for testing industrial and process measurement transmitters - Part 2: Specific procedures for pressure transmitters (IEC 62828-2:2017); German version EN IEC 62828-2:2018
DIN EN 480-15:2021 Admixtures for concrete, mortar and grout - Test methods - Part 15: Reference concrete and method for testing viscosity modifying admixtures; German and English version prEN 480-15:2021

Danish Standards Foundation, Double 85 Test Reference

DS/EN 14390:2007 Fire test - Large-scale room reference test for surface products
DS/EN ISO 3452-3:1999 Non-destructive testing - Penetrant testing - Part 3: Reference test blocks
DS/EN ISO 389-6:2007 Acoustics - Reference zero for the calibration of audiometric equipment - Part 6: Reference threshold of hearing for test signals of short duration
DS/EN 13192:2002 Non destructive testing - Leak testing - Calibration of reference leaks for gases
DS/EN ISO 389-9:2009 Acoustics - Reference zero for the calibration of audiometric equipment - Part 9: Preferred test conditions for the determination of reference hearing threshold levels
DS/EN 12341:1999 Air quality - Determination of the PM 10 fraction of suspended particulate matter - Reference method and field test procedure to demonstrate reference equivalence of measurement methods
DS/EN 61290-4-1:2011 Optical amplifiers - Test methods - Part 4-1: Gain transient parameters - Two-wavelength method
DS/EN 15051:2006 Workplace atmospheres - Measurement of the dustiness of bulk materials - Requirements and reference test methods
DS/EN 60512-26-100/A1:2011 Connectors for electronic equipment - Tests and measurements - Part 26-100: Measurement setup, test and reference arrangements and measurements for connectors according to IEC 60603-7 - Tests 26a to 26g
DS/EN 60512-26-100:2009 Connectors for electronic equipment - Tests and measurements - Part 26-100: Measurement setup, test and reference arrangements and measurements for connectors according to IEC 60603-7 - Tests 26a to 26g
DS/EN 302-7:2013 Adhesives for load-bearing timber structures - Test methods - Part 7: Determination of the working life under referenced conditions
DS/EN 61298-2:2009 Process measurement and control devices - General methods and procedures for evaluating performance - Part 2: Tests under reference conditions
DS/EN 302-5:2013 Adhesives for load-bearing structures - Test methods - Part 5: Determination of maximum assembly time under referenced conditions
DS/EN 993-13:1995 Methods of test for dense shaped refractory products - Part 13: Specification for pyrometric reference cones for laboratory use
DS/EN 480-15:2013 Admixtures for concrete, mortar and grout - Test methods - Part 15: Reference concrete and method for testing viscosity modifying admixtures

Lithuanian Standards Office , Double 85 Test Reference

LST EN 14390-2007 Fire test - Large-scale room reference test for surface products
LST EN 13192-2002 Non destructive testing - Leak testing - Calibration of reference leaks for gases
LST EN 13192-2002/AC-2004 Non destructive testing - Leak testing - Calibration of reference leaks for gases
LST EN ISO 389-6:2007 Acoustics - Reference zero for the calibration of audiometric equipment - Part 6: Reference threshold of hearing for test signals of short duration (ISO 389-6:2007)
LST EN ISO 3452-3+AC:2001 Non-destructive testing - Penetrant testing - Part 3: Reference test blocks (ISO 3452-3:1998)
LST EN 12341-2000 Air quality - Determination of the PM 10 fraction of suspended particulate matter - Reference method and field test procedure to demonstrate reference equivalence of measurement methods
LST EN ISO 389-9:2009 Acoustics - Reference zero for the calibration of audiometric equipment - Part 9: Preferred test conditions for the determination of reference hearing threshold levels (ISO 389-9:2009)
LST EN 15051-2006 Workplace atmospheres - Measurement of the dustiness of bulk materials - Requirements and reference test methods
LST EN 61290-4-1-2011 Optical amplifiers - Test methods -- Part 4-1: Gain transient parameters - Two-wavelength method (IEC 61290-4-1:2011)
LST EN 993-13-2001 Methods of test for dense shaped refractory products - Part 13: Specification for pyrometric reference cones for laboratory use
LST EN 60512-26-100-2009 Connectors for electronic equipment - Tests and measurements - Part 26-100: Measurement setup, test and reference arrangements and measurements for connectors according to IEC 60603-7 - Tests 26a to 26g (IEC 60512-26-100:2008)

AENOR, Double 85 Test Reference

UNE-EN 14390:2007 Fire test - Large-scale room reference test for surface products
UNE-EN 13192:2002 Non destructive testing. Leak testing. Calibration of reference leaks for gases.
UNE-EN ISO 389-6:2008 Acoustics - Reference zero for the calibration of audiometric equipment - Part 6: Reference threshold of hearing for test signals of short duration (ISO 389-6:2007)
UNE-EN ISO 3452-3:2014 Non-destructive testing - Penetrant testing - Part 3: Reference test blocks (ISO 3452-3:2013)
UNE-EN ISO 389-9:2010 Acoustics - Reference zero for the calibration of audiometric equipment - Part 9: Preferred test conditions for the determination of reference hearing threshold levels (ISO 389-9:2009)
UNE 40498:1984 SAMPLING IN TEXTILE TESTS. DEFINITION OF THE STALISTICAL PARAMETERS TO BE CONSIDERED
UNE 83988-1:2008 Concrete durability. Test methods. Determination of the electrical resistivity. Part 1: Direct test (reference method).
UNE 83811:1992 EX MORTARS. TEST METHODS. FRESH MORTARS. DETEMINATION OF CONSISTENCE. FLOW TABLE (REFERENCE METHOD)
UNE-EN 60794-1-2:2014 Optical fibre cables - Part 1-2: Generic specification - Cross reference table for optical cable test procedures
UNE-EN 1766:2000 PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURAL. TEST METHODS. REFERENCE CONCRETES FOR TESTING.
UNE-EN 29009:1995 GLASS CONTAINERS. HEIGHT AND NON-PARALLELISM OF FINISH WITH REFERENCE TO CONTAINER BASE. TEST METHODS. (ISO 9009:1991).
UNE-EN 302-7:2013 Adhesives for load-bearing timber structures - Test methods - Part 7: Determination of the working life under referenced conditions
UNE-EN ISO 16256:2013 Clinical laboratory testing and in vitro diagnostic test systems - Reference method for testing the in vitro activity of antimicrobial agents against yeast of fungi involved in infectious diseases (ISO 16256:2012)
UNE-EN 993-13:1996 Methods of test for dense shaped refractory products - Part 13: Specification for pyrometric reference cones for laboratory use
UNE-EN 480-15:2013 Admixtures for concrete, mortar and grout - Test methods - Part 15: Reference concrete and method for testing viscosity modifying admixtures

American Society for Testing and Materials (ASTM), Double 85 Test Reference

ASTM D3585-08(2020) Standard Specification for ASTM Reference Fluid for Coolant Tests
ASTM E1337-90(2002) Standard Test Method for Determining Longitudinal Peak Braking Coefficient of Paved Surfaces Using a Standard Reference Test Tire
ASTM E1337-90(1996) Standard Test Method for Determining Longitudinal Peak Braking Coefficient of Paved Surfaces Using a Standard Reference Test Tire
ASTM E973-91e1 Test Method for Determination of the Spectral Mismatch Parameter Between a Photovoltaic Device and a Photovoltaic Reference Cell
ASTM G5-14(2021) Standard Reference Test Method for Making Potentiodynamic Anodic Polarization Measurements
ASTM E1921-18 Standard Test Method for Determination of Reference Temperature, To, for Ferritic Steels in the Transition Range
ASTM E1921-18a Standard Test Method for Determination of Reference Temperature, To, for Ferritic Steels in the Transition Range
ASTM E1921-19a Standard Test Method for Determination of Reference Temperature, To, for Ferritic Steels in the Transition Range
ASTM E1921-22 Standard Test Method for Determination of Reference Temperature, T0, for Ferritic Steels in the Transition Range
ASTM E1921-19 Standard Test Method for Determination of Reference Temperature, To, for Ferritic Steels in the Transition Range
ASTM E1921-19b Standard Test Method for Determination of Reference Temperature, To, for Ferritic Steels in the Transition Range
ASTM E1921-20 Standard Test Method for Determination of Reference Temperature, To, for Ferritic Steels in the Transition Range
ASTM E1921-17 Standard Test Method for Determination of Reference Temperature, To, for Ferritic Steels in the Transition Range
ASTM E1921-21a Standard Test Method for Determination of Reference Temperature, T0, for Ferritic Steels in the Transition Range
ASTM E1921-09c Standard Test Method for Determination of Reference Temperature, T_o, for Ferritic Steels in the Transition Range
ASTM E1921-09a Standard Test Method for Determination of Reference Temperature, T_o, for Ferritic Steels in the Transition Range
ASTM E1921-19be1 Standard Test Method for Determination of Reference Temperature, To, for Ferritic Steels in the Transition Range
ASTM G5-14e1 Standard Reference Test Method for Making Potentiodynamic Anodic Polarization Measurements
ASTM E1921-17a Standard Test Method for Determination of Reference Temperature, To, for Ferritic Steels in the Transition Range
ASTM G5-14 Standard Reference Test Method for Making Potentiodynamic Anodic Polarization Measurements
ASTM E1337-90(2008) Standard Test Method for Determining Longitudinal Peak Braking Coefficient of Paved Surfaces Using Standard Reference Test Tire
ASTM G5-13e2 Standard Reference Test Method for Making Potentiodynamic Anodic Polarization Measurements
ASTM G5-13 Standard Reference Test Method for Making Potentiodynamic Anodic Polarization Measurements
ASTM E973-02 Standard Test Method for Determination of the Spectral Mismatch Parameter Between a Photovoltaic Device and a Photovoltaic Reference Cell
ASTM G5-94 Standard Reference Test Method for Making Potentiostatic and Potentiodynamic Anodic Polarization Measurements
ASTM G5-94(1999) Standard Reference Test Method for Making Potentiostatic and Potentiodynamic Anodic Polarization Measurements
ASTM G207-11(2019)e1 Standard Test Method for Indoor Transfer of Calibration from Reference to Field Pyranometers
ASTM E1337-90(2012) Standard Test Method for Determining Longitudinal Peak Braking Coefficient of Paved Surfaces Using Standard Reference Test Tire
ASTM E2005-10(2015) Standard Guide for Benchmark Testing of Reactor Dosimetry in Standard and Reference Neutron Fields
ASTM E1921-12 Standard Test Method for Determination of Reference Temperature, To, for Ferritic Steels in the Transition Range
ASTM E1921-13 Standard Test Method for Determination of Reference Temperature, To, for Ferritic Steels in the Transition Range
ASTM D4678-11 Standard Practice for RubberPreparation, Testing, Acceptance, Documentation, and Use of Reference Materials
ASTM E973-10(2015) Standard Test Method for Determination of the Spectral Mismatch Parameter Between a Photovoltaic Device and a Photovoltaic Reference Cell
ASTM E973-16(2020) Standard Test Method for Determination of the Spectral Mismatch Parameter Between a Photovoltaic Device and a Photovoltaic Reference Cell
ASTM E973-16 Standard Test Method for Determination of the Spectral Mismatch Parameter Between a Photovoltaic Device and a Photovoltaic Reference Cell
ASTM E2005-05e1 Standard Guide for Benchmark Testing of Reactor Dosimetry in Standard and Reference Neutron Fields
ASTM E2005-21 Standard Guide for Benchmark Testing of Reactor Dosimetry in Standard and Reference Neutron Fields
ASTM F847-94(1999) Standard Test Methods for Measuring Crystallographic Orientation of Flats on Single Crystal Silicon Wafers by X-Ray Techniques
ASTM E2005-10 Standard Guide for Benchmark Testing of Reactor Dosimetry in Standard and Reference Neutron Fields
ASTM E1921-15 Standard Test Method for Determination of Reference Temperature, To, for Ferritic Steels in the Transition Range
ASTM E1921-11a Standard Test Method for Determination of Reference Temperature, T_o, for Ferritic Steels in the Transition Range
ASTM G5-94(2011)e1 Standard Reference Test Method for Making Potentiostatic and Potentiodynamic Anodic Polarization Measurements
ASTM E1337-19 Standard Test Method for Determining Longitudinal Peak Braking Coefficient (PBC) of Paved Surfaces Using Standard Reference Test Tire
ASTM E2005-99 Standard Guide for Benchmark Testing of Reactor Dosimetry in Standard and Reference Neutron Fields
ASTM E1337-90 Standard Test Method for Determining Longitudinal Peak Braking Coefficient of Paved Surfaces Using a Standard Reference Test Tire
ASTM E1337-90(2018) Standard Test Method for Determining Longitudinal Peak Braking Coefficient of Paved Surfaces Using Standard Reference Test Tire
ASTM E948-05 Standard Test Method for Electrical Performance of Photovoltaic Cells Using Reference Cells Under Simulated Sunlight
ASTM E2055-99 Standard Practice for Referencing Test Methods for Chemical Analysis of Metals and Related Materials (Withdrawn 2006)
ASTM E1125-16(2020) Standard Test Method for Calibration of Primary Non-Concentrator Terrestrial Photovoltaic Reference Cells Using a Tabular Spectrum
ASTM E948-16(2020) Standard Test Method for Electrical Performance of Photovoltaic Cells Using Reference Cells Under Simulated Sunlight
ASTM E948-16 Standard Test Method for Electrical Performance of Photovoltaic Cells Using Reference Cells Under Simulated Sunlight
ASTM E948-09 Standard Test Method for Electrical Performance of Photovoltaic Cells Using Reference Cells Under Simulated Sunlight
ASTM E1921-23 Standard Test Method for Determination of Reference Temperature, T0, for Ferritic Steels in the Transition Range
ASTM D4575-09(2019) Standard Test Methods for Rubber Deterioration—Reference and Alternative Method(s) for Determining Ozone Level in Laboratory Test Chambers
ASTM F144-80(2005) Standard Practice for Making Reference Glass-Metal Sandwich Seal and Testing for Expansion Characteristics by Polarimetric Methods
ASTM E941-83(1999) Standard Test Method for Calibration of Reference Pyranometers With Axis Tilted by the Shading Method (Withdrawn 2005)
ASTM F140-98 Standard Practice for Making Reference Glass-Metal Butt Seals and Testing for Expansion Characteristics by Polarimetric Methods
ASTM E1921-22a Standard Test Method for Determination of Reference Temperature, T0, for Ferritic Steels in the Transition Range
ASTM F140-98(2003) Standard Practice for Making Reference Glass-Metal Butt Seals and Testing for Expansion Characteristics by Polarimetric Methods
ASTM F140-98(2008) Standard Practice for Making Reference Glass-Metal Butt Seals and Testing for Expansion Characteristics by Polarimetric Methods
ASTM F3107-14(2023) Standard Test Method for Measuring Accuracy After Mechanical Disturbances on Reference Frames of Computer Assisted Surgery Systems
ASTM C1005-20 Standard Specification for Reference Masses and Devices for Determining Mass and Volume for Use in Physical Testing of Hydraulic Cements

Association Francaise de Normalisation, Double 85 Test Reference

NF EN 14390:2007 Essais au feu - Essai de référence dans une pièce à grande échelle pour les produits de surface
NF EN ISO 389-9:2009 Acoustique - Zéro de référence pour l'étalonnage d'équipements audiométriques - Partie 9 : conditions d'essai préconisées pour la détermination des niveaux liminaires d'audition de référence
NF EN ISO 389-6:2008 Acoustique - Zéro de référence pour l'étalonnage d'équipements audiométriques - Partie 6 : niveaux liminaires d'audition de référence pour signaux d'essai de courte durée
NF T97-001-3:2018 Caractérisation des boues - Essais des boues - Partie 3 : détermination de la siccité de référence
NF P94-093:2014 Sols : reconnaissance et essais - Détermination des références de compactage d'un matériau - Essai Proctor Normal - Essai Proctor modifié
NF S30-007-6*NF EN ISO 389-6:2008 Acoustics - Reference zero for the calibration of audiometric equipment - Part 6 : reference threshold of hearing for test signals of short duration
NF EN 14845-1:2007 Méthodes d'essai des fibres dans le béton - Partie 1 : bétons de référence
NF S11-555*NF EN 16128:2015 Ophtalmic optics - Reference method for the testing of spectacler frames and sunglasses for nickel release
NF A09-016*NF ISO 12715:2014 Non-destructive testing - Ultrasonic testing - Reference blocks and test procedures for the characterization of contact probe sound beams
NF EN 1766:2017 Produits et systèmes pour la protection et la réparation des structures en béton - Méthodes d'essai - Bétons de référence pour essais
NF EN 16128:2015 Optique ophtalmique - Méthode d'essai de référence relative à la libération du nickel par les montures de lunettes et lunettes de soleil
NF C93-805-4-1*NF EN 61290-4-1:2017 Optical amplifiers - Test methods - Part 4-1 : gain transient parameters - Two-wavelength method
NF EN ISO 3738-2:2006 Métaux-durs - Essai de dureté Rockwell (échelle A) - Partie 2 : préparation et étalonnage des blocs de référence
NF EN 12875-1:2005 Résistance mécanique au lave-vaisselle des ustensiles - Partie 1 : méthode d'essai de référence pour articles à usage domestique
NF EN 302-7:2023 Adhésifs pour structures portantes en bois - Méthodes d'essai - Partie 7 : détermination de la durée d'utilisation dans des conditions de référence
NF C57-113-4*NF EN IEC 61853-4:2018 Photovoltaic (PV) module performance testing and energy rating - Part 4 : standard reference climatic profiles
NF EN 60512-26-100:2009 Connecteurs pour équipements électroniques - Essais et mesures - Partie 26-100 : montage de mesure, dispositifs d'essai et de référence et mesures pour les connecteurs conformes à la IEC 60603-7 - Essais 26a à 26g
NF EN 60512-26-100/A1:2011 Connecteurs pour équipements électroniques - Essais et mesures - Partie 26-100 : montage de mesure, dispositifs d'essai et de référence et mesures pour les connecteurs conformes à la IEC 60603-7 - Essais 26a à 26g
NF EN 61298-2:2009 Dispositifs de mesure et de commande de processus - Méthodes et procédures générales d'évaluation des performances - Partie 2 : essais dans les conditions de référence
NF EN 1254-20:2021 Cuivre et alliages de cuivre - Raccords - Partie 20 : définitions, dimensions de filetage, méthodes d'essai, données de référence et informations complémentaires
NF EN IEC 61853-4:2018 Essais de performance et caractéristiques assignées d'énergie des modules photovoltaïques (PV) - Partie 4 : profils climatiques de référence normalisés
NF C46-828-3*NF EN IEC 62828-3:2018 Reference conditions and procedures for testing industrial and process measurement transmitters - Part 3 : specific procedures for temperature transmitters
NF C46-828-2*NF EN IEC 62828-2:2018 Reference conditions and procedures for testing industrial and process measurement transmitters - Part 2 : specific procedures for pressure transmitters
NF EN IEC 62828-2:2018 Conditions de référence et procédures pour l'essai des transmetteurs de mesure industrielle et de processus - Partie 2 : procédures spécifiques pour les transmetteurs de pression
NF EN IEC 62828-3:2018 Conditions de référence et procédures pour l'essai des transmetteurs de mesure industrielle et de processus - Partie 3 : procédures spécifiques pour les transmetteurs de température

Professional Standard - Electron, Double 85 Test Reference

SJ/T 10439-1993 Test methods for bipolar transister DC parameter testers
SJ/T 10438-1993 General specification for bipolar transister DC parameter testers
SJ 20232-1993 Verification regulation of KDK double gate FET Gp tester

GOSTR, Double 85 Test Reference

GOST R 58767-2019 Mortars. Test methods using reference specimens

Korean Agency for Technology and Standards (KATS), Double 85 Test Reference

KS B ISO 3452-3:2022 Non-destructive testing — Penetrant testing —Part 3: Reference test blocks
KS B ISO 3452-3:2016 Non－destructive testing－Penetrant testing－Part 3：Reference test blocks
KS B ISO 12715:2018 Non-destructive testing — Ultrasonic testing — Reference blocks and test procedures for the characterization of contact probe sound beams
KS B 0533-1995 Methods for measurement on ultrasonic velocity of solid by pulse technique using reference test pieces
KS M 0112-1979(1997) PREPARATION OF STOCK SOLUTIONS AND STANDARD SOLUTIONS
KS B 0533-2005(2010) Methods for measurement on ultrasonic velocity of solidby pulse technique using reference test pieces
KS B 5530-2003(2018)
KS P 1013-2010(2021) Standard reference materials for the quality control of antigen detection tests of Plasmodium falciparum malaria
KS P 1014-2010(2021) Standard reference materials for the quality control of antigen detection tests of Plasmodium vivax malaria
KS P 1013-2010(2016) Standard reference materials for the quality control of antigen detection tests of Plasmodium falciparum malaria
KS P 1014-2010(2016) Standard reference materials for the quality control of antigen detection tests of Plasmodium vivax malaria
KS K ISO 105-B08:2018 Textiles — Tests for colour fastness — Part B08:Quality control of blue wool reference materials 1 to 7
KS P ISO 15193:2010 In vitro diagnostic medical devices-Measurement of quantities in samples of biological origin-Requirements for content and presentation of reference measurement procedures
KS P ISO 15193:2014 In vitro diagnostic medical devices — Measurement of quantities in samples of biological origin — Requirements for content and presentation of reference measurement procedures

KR-KS, Double 85 Test Reference

KS B ISO 3452-3-2022 Non-destructive testing — Penetrant testing —Part 3: Reference test blocks
KS B ISO 12715-2018 Non-destructive testing — Ultrasonic testing — Reference blocks and test procedures for the characterization of contact probe sound beams
KS K ISO 105-B08-2018 Textiles — Tests for colour fastness — Part B08:Quality control of blue wool reference materials 1 to 7

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Double 85 Test Reference

GB/T 18851.3-2008 Non-destructive testing.Penetrant testing.Part 3:Reference test blocks
GB/T 3789.21-1991 Measurements of the electrical properties of transmitting tubes--Measuring methods of static characteristic reference point
GB/T 13388-2009 Method for measuring crystallographic orientation of flats on single-crystal silicon slices and wafers by X-ray techniques
GB/T 11259-2015 Non-destructive testing.Practice for fabrication and control of steel reference blocks used in ultrasonic testing
GB/T 11259-2008 Non-destructive testing.Practice for fabrication and control of steel reference blocks used in ultrasonic testing
GB/T 18852-2002 Ultrasonic non-destructive testing--Reference blocks and test procedures for the characterization of contact search unit beam profiles

ES-UNE, Double 85 Test Reference

UNE-EN ISO 20486:2018 Non-destructive testing - Leak testing - Calibration of reference leaks for gases (ISO 20486:2017)
UNE-EN ISO 16859-3:2016 Metallic materials - Leeb hardness test - Part 3: Calibration of reference test blocks (ISO 16859-3:2015)
UNE-EN ISO 4545-3:2018 Metallic materials - Knoop hardness test - Part 3: Calibration of reference blocks (ISO 4545-3:2017)
UNE-EN ISO 6508-3:2015 Metallic materials - Rockwell hardness test - Part 3: Calibration of reference blocks (ISO 6508-3:2015)
UNE-EN ISO 6507-3:2018 Metallic materials - Vickers hardness test - Part 3: Calibration of reference blocks (ISO 6507-3:2018)
UNE-EN ISO 14577-3:2016 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 3: Calibration of reference blocks (ISO 14577-3:2015)
UNE-EN 16128:2016 Ophthalmic optics - Reference method for the testing of spectacle frames and sunglasses for nickel release
UNE-EN 1766:2019 Products and systems for the protection and repair of concrete structures - Test methods - Reference concretes for testing
UNE-EN 61290-4-1:2016 Optical amplifiers - Test methods - Part 4-1: Gain transient parameters - Two-wavelength method (Endorsed by Asociación Española de Normalización in February of 2017.)
UNE-EN IEC 61853-4:2018 Photovoltaic (PV) module performance testing and energy rating - Part 4: Standard reference climatic profiles (Endorsed by Asociación Española de Normalización in December of 2018.)
UNE-EN 60512-26-100:2008 Connectors for electronic equipment - Tests and measurements -- Part 26-100: Measurement setup, test and reference arrangements and measurements for connectors according to IEC 60603-7 - Tests 26a to 26g (Endorsed by AENOR in February of 2009.)
UNE-EN 60512-26-100:2008/A1:2011 Connectors for electronic equipment - Tests and measurements - Part 26-100: Measurement setup, test and reference arrangements and measurements for connectors according to IEC 60603-7 - Tests 26a to 26g (Endorsed by AENOR in September of 2011.)
UNE-EN ISO 283:2023 Textile conveyor belts - Full thickness tensile strength, elongation at break and elongation at the reference load - Test method (ISO 283:2023) (Endorsed by Asociación Española de Normalización in May of 2023.)
UNE-EN 61298-2:2008 Process measurement and control devices - General methods and procedures for evaluating performance -- Part 2: Tests under reference conditions (Endorsed by AENOR in March of 2009.)
UNE-EN IEC 62828-2:2018 Reference conditions and procedures for testing industrial and process measurement transmitters - Part 2: Specific procedures for pressure transmitters (Endorsed by Asociación Española de Normalización in March of 2018.)
UNE-EN IEC 62828-3:2018 Reference conditions and procedures for testing industrial and process measurement transmitters - Part 3: Specific procedures for temperature transmitters (Endorsed by Asociación Española de Normalización in August of 2018.)
UNE-EN IEC 62828-4:2020 Reference conditions and procedures for testing industrial and process measurement transmitters - Part 4: Specific procedures for level transmitters (Endorsed by Asociación Española de Normalización in November of 2020.)
UNE-EN IEC 62828-5:2020 Reference conditions and procedures for testing Industrial and process measurement transmitters - Part 5: Specific procedures for flow transmitters (Endorsed by Asociación Española de Normalización in November of 2020.)

Standard Association of Australia （SAA）, Double 85 Test Reference

AS ISO 3452.3:2020 Non-destructive testing — Penetrant testing, Part 3: Reference test blocks
AS 1141.30.2:2009
AS 1141.30.2:2022 Methods for sampling and testing aggregates, Method 30.2: Preparation of aggregate reference specimens for visual comparison
AS/NZS 3580.2.2:2016 Methods for sampling and analysis of ambient air, Method 2.2: Preparation of reference test atmospheres — Compressed gas method
AS 4594.1:1999 Internal combustion engines - Performance - Standard reference conditions, declarations of power, fuel and lubricating oil consumption and test methods
AS 2300.1.2.1:1991 Methods of chemical and physical testing for the dairying industry - General methods and principles - Determination of nitrogen - Reference Kjeldahl method

ETSI - European Telecommunications Standards Institute, Double 85 Test Reference

TR 103 595-2019 System Reference document (SRdoc); Transmission characteristics; Technical characteristics for level probing radar within the frequency range 75 GHz to 85 GHz (V1.1.1)
TR 103 119-2018 Methods for Testing and Specification (MTS); The Test Description Language (TDL); Reference Implementation (V1.1.1)
ETR 303-1997 Methods for Testing and Specification (MTS); Test Synchronization; Architectural Reference; Test Synchronization Protocol 1 (TSP1) Specification
TR 102 976-2009 Methods for Testing and Specifications (MTS); Mobile Reference tests for TTCN-3 tools (V1.2.1; Includes Diskette)
ES 201 770-2000 Methods for Testing and Specification (MTS); Test Synchronization Architectural Reference; Test Synchronization Protocol 1 Plus (TSP1+) Specification (V4.2.4)
TS 103 256-2014 Speech and multimedia Transmission Quality (STQ); Reference webpage for subjective testing (V1.1.1)
TS 103 222-2-2017 Speech and multimedia Transmission Quality (STQ); Reference benchmarking@ background traffic profiles and KPIs; Part 2: Reference benchmarking and KPIs for High speed internet (V1.1.1)
TS 102 995-2010 Methods for Testing and Specification (MTS); The Testing and Test Control Notation version 3; Proforma for TTCN-3 reference test suite (V1.1.1; Includes Diskette)
TS 103 222-4-2015 Speech and multimedia Transmission Quality (STQ); Reference benchmarking@ background traffic profiles and KPIs; Part 4: Reference benchmarking for IPTV@ Web TV and RCS-e Video Share (V1.1.1)
TS 103 222-3-2015 Speech and multimedia Transmission Quality (STQ); Reference benchmarking@ background traffic profiles and KPIs; Part 3: Reference benchmarking@ background traffic profiles and KPIs for UMTS and VoLTE (V1.1.1)
TS 186 008-4-2015 Core Network and Interoperability Testing (INT); IMS/NGN Performance Benchmark; Part 4: Reference Load network quality parameters (V2.1.1)
TS 103 222-1-2018 Speech and multimedia Transmission Quality (STQ); Reference benchmarking@ background traffic profiles and KPIs; Part 1: Reference benchmarking@ background traffic profiles and KPIs for VoIP and FoIP in fixed networks (V1.2.1)
TS 103 222-1-2015 Speech and multimedia Transmission Quality (STQ); Reference benchmarking@ background traffic profiles and KPIs; Part 1: Reference benchmarking@ background traffic profiles and KPIs for VoIP and FoIP in fixed networks (V1.1.1)
TS 103 222-1-2019 Speech and multimedia Transmission Quality (STQ); Reference benchmarking@ background traffic profiles and KPIs; Part 1: Reference benchmarking@ background traffic profiles and KPIs for VoIP and FoIP in fixed networks (V1.3.1)
ETR 259-1996 Methods for Testing and Specification (MTS); Bibliography of Techniques@ Methodologies and Practices Used in Standards Making

Society of Automotive Engineers (SAE), Double 85 Test Reference

SAE AMS3021D-2007 Fluid, Reference for Testing Di-Ester (Polyol) Resistant Material
SAE AMS3021A-1989 FLUID, REFERENCE FOR TESTING DI-ESTER (POLYOL) RESISTANT MATERIAL
SAE AMS3021B-2004 FLUID, REFERENCE FOR TESTING DI-ESTER (POLYOL) RESISTANT MATERIAL
SAE AMS3021C-1998 Fluid, Reference, For Testing Di-Ester (Polyol) Resistant Material
SAE AIR6282A-2021 Fiber Optic Harsh Environment Test Methods Cross Reference Document
SAE AMS3085-2007 Fluid, Reference for Testing AS5780 HPC Class (Polyol) Resistant Material
SAE AMS3021-1979 REFERENCE FLUID FOR TESTING DI-ESTER (POLYOL) RESISTANT MATERIAL
SAE AMS3023-2003 FLUID, REFERENCE FOR TESTING POLYOL ESTER (AND DIESTER) RESISTANT MATERIAL
SAE AMS3400A-2022 Fluid, Reference for Testing Polyalphaolefin (PAO) Resistant Material
SAE AMS3023C-2022 Fluid, Reference for Testing Polyol Ester (and Diester) Resistant Material
SAE J1065-2009 Nominal Reference Working Pressures for Steel Hydraulic Tubing
SAE AMS3022A-1987 REFERENCE FLUID FOR TESTING HYDROCARBON FUEL RESISTANT MATERIALS 10% Aromatic Content
SAE AMS3022-1980 REFERENCE FLUID FOR TESTING HYDROCARBON FUEL RESISTANT MATERIALS 10% Aromatic Content

Indonesia Standards, Double 85 Test Reference

SNI 03-3625-1994 Recommendation for measuring ultrasonic pulses speed in concrete

SAE - SAE International, Double 85 Test Reference

SAE AIR6282-2015 Fiber Optic Harsh Environment Test Methods Cross Reference Document
SAE AMS3022C-1998 Reference Fluid for Testing Hydrocarbon Fuel Resistant Materials: 10% Aromatic Content
SAE AMS3022B-1994 Reference Fluid for Testing Hydrocarbon Fuel Resistant Materials 10% Aromatic Content

European Telecommunications Standards Institute (ETSI), Double 85 Test Reference

ETSI ETR 303-1997 Methods for Testing and Specification (MTS); Test Synchronization; Architectural Reference; Test Synchronization Protocol 1 (TSP1) Specification
ETSI ES 201 770-2000 Methods for Testing and Specification (MTS); Test Synchronization Architectural Reference; Test Synchronization Protocol 1 Plus (TSP1+) Specification
ETSI TR 102 976-2009 Methods for Testing and Specifications (MTS); Mobile Reference tests for TTCN-3 tools (V1.2.1; Includes Diskette)
ETSI TS 103 256-2014 Speech and multimedia Transmission Quality (STQ); Reference webpage for subjective testing (V1.1.1)
ETSI TS 103 222-3-2015 Speech and multimedia Transmission Quality (STQ); Reference benchmarking, background traffic profiles and KPIs; Part 3: Reference benchmarking, background traffic profiles and KPIs for UMTS and VoLTE (V1.1.1)
ETSI TS 103 222-4-2015 Speech and multimedia Transmission Quality (STQ); Reference benchmarking, background traffic profiles and KPIs; Part 4: Reference benchmarking for IPTV, Web TV and RCS-e Video Share (V1.1.1)
ETSI TS 102 995-2010 Methods for Testing and Specification (MTS); The Testing and Test Control Notation version 3; Proforma for TTCN-3 reference test suite (V1.1.1; Includes Diskette)
ETSI TS 103 222-1-2015 Speech and multimedia Transmission Quality (STQ); Reference benchmarking, background traffic profiles and KPIs; Part 1: Reference benchmarking, background traffic profiles and KPIs for VoIP and FoIP in fixed networks (V1.1.1)
ETSI TS 186 008-4-2015 Core Network and Interoperability Testing (INT); IMS/NGN Performance Benchmark; Part 4: Reference Load network quality parameters (V2.1.1)
ETSI ETR 259-1996 Methods for Testing and Specification (MTS); Bibliography of Techniques, Methodologies and Practices Used in Standards Making

IX-SA, Double 85 Test Reference

AS METHOD No.481.1

American Gear Manufacturers Association, Double 85 Test Reference

AGMA 13FTM12-2013 Practical Considerations for the Use of Double Flank Testing for the Manufacturing Control of Gearing

AGMA - American Gear Manufacturers Association, Double 85 Test Reference

13FTM12-2013 Practical Considerations for the Use of Double Flank Testing for the Manufacturing Control of Gearing

IX-EU/EC, Double 85 Test Reference

M 287-1999 MANDATE TO CEN FOR A UNIFORM SYSTEM FOR FUEL QUALITY MONITORING

International Organization for Standardization (ISO), Double 85 Test Reference

ISO 389-6:2007 Acoustics - Reference zero for the calibration of audiometric equipment - Part 6: Reference threshold of hearing for test signals of short duration
ISO 12715:2014 Non-destructive testing - Ultrasonic testing - Reference blocks and test procedures for the characterization of contact probe sound beams
ISO 15193:2002 In vitro diagnostic medical devices - Measurement of quantities in samples of biological origin - Presentation of reference measurement procedures

Group Standards of the People's Republic of China, Double 85 Test Reference

T/SSMT 1-2020 Performance requirements and test methods for GNSS geodetic antenna and reference station antenna
T/CPIA 0019.1-2020 Test method for electrical parameters of double-sided photovoltaic modules Part 1: Double-sided simultaneous illumination method
T/CPIA 0019.2-2020 Test methods for electrical parameters of bifacial photovoltaic modules Part 2: Formula method

Japanese Industrial Standards Committee (JISC), Double 85 Test Reference

JIS Z 2353:1991 Methods for measurement on ultrasonic velocity of solid by pulse technique using reference test pieces
JIS C 6122-4-1:2013 Optical amplifiers.Test methods.Part 4-1: Transient parameters.Measurement of gain parameters using two-wavelength method

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Double 85 Test Reference

GB/T 36085-2018 Nanotechnologies—Guidance for developing representative test materials consisting of nano-objects in dry powder form

ATIS - Alliance for Telecommunications Industry Solutions, Double 85 Test Reference

0300111-2014 Next Generation Interconnection Interoperability Forum (NGIIF) - NGN Reference Document: NGN Testing
0300024-2008 Network Interconnection Interoperability (NIIF) Reference Document Part V@ Testline Guidelines (Version 10.1)
0300024-2009 Network Interconnection Interoperability (NIIF) Reference Document Part V@ Test Line Guidelines (Version 11.1)
0300024-2018 Next Generation Interconnection Interoperability (NGIIF) Reference Document: Part V@ Test Line Guidelines (Version 13.0)
0300024-2011 Next Generation Interconnection Interoperability (NGIIF) Reference Document: Part V@ Test Line Guidelines (Version 12.0)
0300035-2009 Network Interconnection Interoperability (NIIF) Reference Document Part XII@ Tollfree Industry Test Plan (Version 11.0)
0300035-2011 Next Generation Interconnection Interoperability (NGIIF) Reference Document Part XII@ Tollfree Industry Test Plan (Version 12.0)
0300035-2008 Network Interconnection Interoperability (NIIF) Reference Document Part XII@ Tollfree Industry Test Plan (Version 10.1)
0300025-2009 Network Interconnection Interoperability (NIIF) Reference Document Part V@ Test Line Guidelines Attachment A Test Line Directory Dictionary (Version 11.1)
0300025-2008 Network Interconnection Interoperability (NIIF) Reference Document Part V@ Testline Guidelines Attachment A Testline Directory Dictionary (Version 10.1)
0300025-2011 Next Generation Interconnection Interoperability (NGIIF) Reference Document: Part V@ Test Line Guidelines Attachment A Test Line Directory Dictionary (Version 12.0)
0300022-2009 Network Interconnection Interoperability (NIIF) Reference Document Part III@ Installation@ Testing and Maintenance Responsibilities for SS7 Links and Trunks Attachment K Dual STP Failure Prevention Procedures (Formerly NIIF 5017) (Version 11.0)
0300022-2011 Next Generation Interconnection Interoperability (NGIIF) Reference Document: Part III@ Installation@ Testing and Maintenance Responsibilities for SS7 Links and Trunks Attachment K@ Dual STP Failure Prevention Procedures (Formerly NIIF 5017) (Version 12.0)
0300022-2008 Network Interconnection Interoperability (NIIF) Reference Document Part III@ Installation@ Testing and Maintenance Responsibilities for SS7 Links and Trunks Attachment K Dual STP Failure Prevention Procedures (Formerly NIIF 5017) (Version 10.1)

AT-ON, Double 85 Test Reference

ONORM N 4003-1994 Testing of meat and meat products - Determination of Chloride content - Reference method (titrimetric)
ONORM C 9435-3-1994 Testing of elastomers - Determination of resistance to ozone cracking - Determination of the concentration of ozone (Reference method)
ONORM N 4004-1994 Testing of meat and meat products - Determination of water content - Reference method (gravimetric)
ONORM N 4002-1994 Testing of meat and meat products - Determination of total tat content - Reference method (gravimetric)
OENORM EN 302-7-2021 Adhesives for load-bearing timber structures - Test methods - Part 7: Determination of the working life under referenced conditions

未注明发布机构, Double 85 Test Reference

DIN EN 13192 Berichtigung:2004 Non-destructive testing – leak testing – calibrating reference leaks for gases; German version EN 13192:2001
DIN/TS 8204:2020 Founding - Radiographic testing - Reference images for spheroidal graphite cast irons and grey cast irons; Text in English
DIN EN ISO 6507-3 Bei 1:1998 Metallic materials – Hardness test according to Vickers – Part 3: Calibration of hardness reference plates
DIN EN IEC 62828-4:2022 Reference conditions and test methods for industry and process measurement transmitters – Part 4: Special test methods for level transmitters
DIN EN ISO 6507-3:1998 Metallic materials hardness testing according to Vickers DIN Part 3: Calibration of hardness reference plates
BS EN IEC 62828-2:2018(2020) Reference conditions and procedures for testing industrial and process measurement transmitters Part 2 : Specific procedures for pressure transmitters

PT-IPQ, Double 85 Test Reference

NP EN ISO 3452-3:2000 Non-destructive testing Penetrant testing Part 3:Reference test blocks(ISO 3452-3-1998)
NP EN 480-1-2000 Admixtures for concrete,mortar and grout Test methods Part 1:Reference concrete and reference mortar for testing

ZA-SANS, Double 85 Test Reference

SANS 14577-3:2009 Metallic materials - Instrumented indentation test for hardness and materials parameters Part 3: Calibration of reference blocks
SANS 12715:2004 Ultrasonic non-destructive testing - Reference blocks and test procedures for the characterization of contact search unit beam profiles

WRC - Welding Research Council, Double 85 Test Reference

BULLETIN 227-1977 TEST OF TORISPHERICAL PRESSURE VESSEL HEADS CONVEX TO PRESSURE; REFERENCE STRESS CONCEPTS FOR CREEP ANALYSIS

CEN - European Committee for Standardization, Double 85 Test Reference

PD CEN/TS 16677:2014 Ophthalmic optics - Reference method for the testing of spectacle frames and sunglasses for nickel release
EN 15051:2006 Workplace atmospheres - Measurement of the dustiness of bulk materials - Requirements and reference test methods
EN ISO 11699-2:2018 Non-destructive testing - Industrial radiographic films - Part 2: Control of film processing by means of reference values

PL-PKN, Double 85 Test Reference

PN M42027-1991 Industrial automatics and measurements. Accuracy parameters of reference function for equipment. Requirements for standardization. General test methods

国家市场监督管理总局、中国国家标准化管理委员会, Double 85 Test Reference

GB/T 18852-2020 Non-destructive testing—Ultrasonic testing—Reference blocks and test procedures for the characterization of contact probe sound beams

SE-SIS, Double 85 Test Reference

SIS SS IEC 303:1985 Acoustics - IEC provisional reference coupler for the calibration of earphone used in audiometry

National Metrological Verification Regulations of the People's Republic of China, Double 85 Test Reference

JJG(电子) 310007-2006 Speciation for verification of DC parameter testing system for isolated gate bipolar transistors

RU-GOST R, Double 85 Test Reference

GOST R 52118-2003 Reference materials of nuclear materials for radiation monitors. General technical requirements and testing methods
GOST R 8.906-2015 State system for ensuring the uniformity of measurements. Indication pressure gauges. Reference measuring instruments. Metrological requirements and test methods
GOST R ISO 15193-2015 In vitro medical devices. Measurement of quantities in samples of biological origin. Requirements for content and presentation of reference measurement procedures

Professional Standard - Energy, Double 85 Test Reference

NB/T 20292-2014 Test method for determination of reference temperature, T<下标0>, for ferritic steels in the ductile-to-brittle transition range for nuclear power plants

IEEE - The Institute of Electrical and Electronics Engineers@ Inc., Double 85 Test Reference

IEEE 3-1982 RECOMMENDED PRACTICE IN THE SELECTION OF REFERENCE AMBIENT CONDITIONS FOR TEST MEASUREMENTS OF ELECTRICAL APPARATUS

Alliance of Telecommunications Industry Solutions （ATIS), Double 85 Test Reference

ATIS 0300024-2011 Next Generation Interconnection Interoperability (NGIIF) Reference Document: Part V, Test Line Guidelines
ATIS 0300025-2011 Next Generation Interconnection Interoperability (NGIIF) Reference Document: Part V, Test Line Guidelines Attachment A Test Line Directory Dictionary
ATIS 0300035-2011 Next Generation Interconnection Interoperability (NGIIF) Reference Document Part XII, Tollfree Industry Test Plan
ATIS 0300025-2009 Network Interconnection Interoperability (NIIF) Reference Document Part V, Test Line Guidelines Attachment A Test Line Directory Dictionary Version 11.1
ATIS 0300035-2009 Network Interconnection Interoperability (NIIF) Reference Document Part XII, Tollfree Industry Test Plan Version 11.1
ATIS 0300022-2011 Next Generation Interconnection Interoperability (NGIIF) Reference Document: Part III, Installation, Testing and Maintenance Responsibilities for SS7 Links and Trunks Attachment K, Dual STP Failure Prevention Procedures (Formerly NIIF 5017)
ATIS 0300030-2011 Next Generation Interconnection Interoperability (NGIIF) Reference Document Part IX, Installation, Testing and Maintenance Responsibilities of Facilities
ATIS 0300034-2011 Next Generation Interconnection Interoperability (NGIIF) Reference Document Part XI, Local Number Portability Interconnection Testing Document

Professional Standard - Chemical Industry, Double 85 Test Reference

HG/T 2101-1991 Test and parameter measurement method of single-stage cantilever double-acting liquid ring chlorine pump

Underwriters Laboratories (UL), Double 85 Test Reference

UL 924 TGD-2017 UL Standard for Safety Emergency Lighting and Power Equipment - Section / Paragraph Reference: See Subject Topics Topic 1: Representative Luminance Measurement Testing for Exit Signs- Section / Paragraph Reference: 43.1.9 Topic 2: Representative Fluoresce
UL 924 TGD-2016 UL Standard for Safety Emergency Lighting and Power Equipment - Section / Paragraph Reference: See Subject Topics Topic 1: Representative Luminance Measurement Testing for Exit Signs- Section / Paragraph Reference: 43.1.9 Topic 2: Representative Fluoresce
UL 924 TGD-2015 UL Standard for Safety Emergency Lighting and Power Equipment - Section / Paragraph Reference: See Subject Topics Subject: Topic 1: Representative Luminance Measurement Testing for Exit Signs - Section / Paragraph Reference: 41.1.8 Topic 2: Representative
UL 1838 CRD-2023 UL Standard for Safety Low Voltage Landscape Lighting Systems - Section / Paragraph Reference: 32.1 Subject: Dielectric Withstand Test

US-CFR-file, Double 85 Test Reference

CFR 40-1065.1010-2014 Protection of Environment. Part1065:Engine-testing procedures. Section1065.1010:Incorporation by reference.

International Electrotechnical Commission (IEC), Double 85 Test Reference

IEC 62828-5:2020 Reference conditions and procedures for testing industrial and process measurement transmitters - Part 5: Specific procedures for flow transmitters
IEC 61290-4-1:2016 Optical amplifiers - Test methods - Part 4-1: Gain transient parameters - Two-wavelength method
IEC 61290-4-1:2011 Optical amplifiers - Test methods - Part 4-1: Gain transient parameters - Two-wavelength method
IEC 62828-2:2017 Reference conditions and procedures for testing industrial and process measurement transmitters - Part 2: Specific procedures for pressure transmitters
IEC 60512-26-100:2008/AMD1:2011 Connectors for electronic equipment - Tests and measurements - Part 26-100: Measurement setup, test and reference arrangements and measurements for connectors according to IEC 60603-7 - Tests 26a to 2
IEC 60512-26-100:2008 Connectors for electronic equipment - Tests and measurements - Part 26-100: Measurement setup, test and reference arrangements and measurements for connectors according to IEC 60603-7 - Tests 26a to 26g
IEC 60512-26-100:2008+AMD1:2011 CSV Connectors for electronic equipment - Tests and measurements - Part 26-100: Measurement setup, test and reference arrangements and measurements for connectors according to IEC 60603-7 - Tests 26a to 2
IEC 60512-26-100:2011 Connectors for electronic equipment - Tests and measurements - Part 26-100: Measurement setup, test and reference arrangements and measurements for connectors according to IEC 60603-7 - Tests 26a to 26g

Malaysia Standards, Double 85 Test Reference

MS 954 Pt.10-1986

National Association of Corrosion Engineers (NACE), Double 85 Test Reference

NACE TM0211-2011 Durability Test for Copper/Copper Sulfate Permanent Reference Electrodes for Direct Burial Applications (Item No. 21257)

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, Double 85 Test Reference

PREN 2003-15-1995 Aerospace Series Test Methods for Metallic Materials Ultrasonic Testing Part 15 : Reference Blocks (Edition P1)

CENELEC - European Committee for Electrotechnical Standardization, Double 85 Test Reference

EN IEC 61853-4:2018 Photovoltaic (PV) module performance testing and energy rating - Part 4: Standard reference climatic profiles
EN IEC 62828-2:2018 Reference conditions and procedures for testing industrial and process measurement transmitters - Part 2: Specific procedures for pressure transmitters

GM Global, Double 85 Test Reference

GMW 16844-2012 Retained Austenite Reference Photomicrographs and Test Method for Nodular Cast Iron Camshafts Issue 1; English

RO-ASRO, Double 85 Test Reference

STAS 6679/10-1985 Metal cutting machine-tools CHECK METHOD OF THE ROTA- TION AXIS EQUIDISTANCE OF THE WORKING ELEMENT TO A REFERENCE BASIS

Taiwan Provincial Standard of the People's Republic of China, Double 85 Test Reference

CNS 14393.8-2005 Biological evaluation of medical devices - Part 8: Selection and qualification of reference materials for biological tests
CNS 14393-8-2005 Biological evaluation of medical devices - Part 8: Selection and qualification of reference materials for biological tests

European Committee for Electrotechnical Standardization（CENELEC）, Double 85 Test Reference

EN IEC 62828-3:2018 Reference conditions and procedures for testing industrial and process measurement transmitters - Part 3: Specific procedures for temperature transmitters
EN IEC 62828-4:2020 Reference conditions and procedures for testing industrial and process measurement transmitters - Part 4: Specific procedures for level transmitters
EN IEC 62828-5:2020 Reference conditions and procedures for testing industrial and process measurement transmitters - Part 5: Specific procedures for flow transmitters
EN 60512-26-100:2008 Connectors for electronic equipment - Tests and measurements - Part 26-100: Measurement setup, test and reference arrangements and measurements for connectors according to IEC 60603-7 - Tests 26a to 26g (Incorporates Amendment A1: 2011)