ZH
RU
ES
Instruments for testing shear force
Instruments for testing shear force, Total:282 items.
In the international standard classification, Instruments for testing shear force involves: Powder metallurgy, Reinforced plastics, Rubber, Waxes, bituminous materials and other petroleum products, Construction materials, Rubber and plastics products, Road vehicles in general, Plastics, Soil quality. Pedology, Materials for aerospace construction, Testing of metals, Mechanical testing, Adhesives, Road engineering, Earthworks. Excavations. Foundation construction. Underground works, Structures of buildings, Road vehicle systems, Raw materials for rubber and plastics, Elements of buildings, Fibre optic communications, Electromechanical components for electronic and telecommunications equipment, Transformers. Reactors, Wood technology processes, Welding, brazing and soldering, Electrical accessories, Test conditions and procedures in general, Pipeline components and pipelines, Measurement of volume, mass, density, viscosity, Sports equipment and facilities, Shipbuilding and marine structures in general, Lubricants, industrial oils and related products, Fasteners, Measurement of force, weight and pressure, Semiconductor devices, Fluid storage devices, Acoustics and acoustic measurements, Agricultural machines, implements and equipment, Fuels, Cellular materials, Nuclear energy engineering, Hydraulic energy engineering, Ceramics, Medical equipment.
PL-PKN, Instruments for testing shear force
- PN B04482-1989 Apparatus lor laboratory shear strcngith tcsting of soils willi de lined shear surlaee General technical requirenents
- PN E88604-1988 Electrical relays Endurance tests for electrical relay contacts Specification for the charakteristics of test equipment
American Society for Testing and Materials (ASTM), Instruments for testing shear force
- ASTM D6682-01 Standard Test Method for Measuring the Shear Stresses of Powders Using the Peschl Rotational Split Level Shear Tester
- ASTM D6682-01(2006) Standard Test Method for Measuring Shear Stresses of Powders Using Peschl Rotational Split Level Shear Tester
- ASTM D6682-08 Standard Test Method for Measuring Shear Stresses of Powders Using Peschl Rotational Split Level Shear Tester
- ASTM D7552-09 Standard Test Method for Determining the Complex Shear Modulus (G*) Of Bituminous Mixtures Using Dynamic Shear Rheometer
- ASTM D7552-22 Standard Test Method for Determining the Complex Shear Modulus (G*) of Asphalt Mixtures Using Dynamic Shear Rheometer
- ASTM D945-92(1997) Standard Test Methods for Rubber Properties in Compression or Shear (Mechanical Oscillograph)
- ASTM D945-92(2001)e1 Standard Test Methods for Rubber Properties in Compression or Shear (Mechanical Oscillograph)
- ASTM D945-06 Standard Test Methods for Rubber Properties in Compression or Shear (Mechanical Oscillograph)
- ASTM D7405-08 Standard Test Method for Multiple Stress Creep and Recovery (MSCR) of Asphalt Binder Using a Dynamic Shear Rheometer
- ASTM D7405-20 Standard Test Method for Multiple Stress Creep and Recovery (MSCR) of Asphalt Binder Using a Dynamic Shear Rheometer
- ASTM D6243/D6243M-13a Standard Test Method for Determining the Internal and Interface Shear Resistance of Geosynthetic Clay Liner by the Direct Shear Method
- ASTM D7405-15 Standard Test Method for Multiple Stress Creep and Recovery (MSCR) of Asphalt Binder Using a Dynamic Shear Rheometer
- ASTM D7608-18e1 Standard Test Method for Torsional Ring Shear Test to Measure Drained Fully Softened Shear Strength and Stress Dependent Strength Envelope of Fine-Grained Soils
- ASTM D5656-01 Standard Test Method for Thick-Adherend Metal Lap-Shear Joints for Determination of the Stress-Strain Behavior of Adhesives in Shear by Tension Loading
- ASTM D7312-07 Standard Test Method for Determining the Permanent Shear Strain and Complex Shear Modulus of Asphalt Mixtures Using the Superpave Shear Tester (SST)
- ASTM D7312-10 Standard Test Method for Determining the Permanent Shear Strain and Complex Shear Modulus of Asphalt Mixtures Using the Superpave Shear Tester (SST)
- ASTM D7405-10 Standard Test Method for Multiple Stress Creep and Recovery (MSCR) of Asphalt Binder Using a Dynamic Shear Rheometer
- ASTM D7405-08a Standard Test Method for Multiple Stress Creep and Recovery (MSCR) of Asphalt Binder Using a Dynamic Shear Rheometer
- ASTM D945-06(2012) Standard Test Methods for Rubber Properties in Compression or Shear (Mechanical Oscillograph)
- ASTM D945-16 Standard Test Methods for Rubber Properties in Compression or Shear (Mechanical Oscillograph)
- ASTM D7175-05 Standard Test Method for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer
- ASTM D7175-07 Standard Test Method for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer
- ASTM D7175-05e1 Standard Test Method for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer
- ASTM D2919-01(2007) Standard Test Method for Determining Durability of Adhesive Joints Stressed in Shear by Tension Loading
- ASTM D2919-00 Standard Test Method for Determining Durability of Adhesive Joints Stressed in Shear by Tension Loading
- ASTM D2919-01e1 Standard Test Method for Determining Durability of Adhesive Joints Stressed in Shear by Tension Loading
- ASTM D2919-01 Standard Test Method for Determining Durability of Adhesive Joints Stressed in Shear by Tension Loading
- ASTM D2919-01(2014) Standard Test Method for Determining Durability of Adhesive Joints Stressed in Shear by Tension Loading
- ASTM D7405-10a Standard Test Method for Multiple Stress Creep and Recovery (MSCR) of Asphalt Binder Using a Dynamic Shear Rheometer
- ASTM D7175-08 Standard Test Method for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer
- ASTM D5656-10 Standard Test Method for Thick-Adherend Metal Lap-Shear Joints for Determination of the Stress-Strain Behavior of Adhesives in Shear by Tension Loading
- ASTM D5656-04 Standard Test Method for Thick-Adherend Metal Lap-Shear Joints for Determination of the Stress-Strain Behavior of Adhesives in Shear by Tension Loading
- ASTM D5656-04e1 Standard Test Method for Thick-Adherend Metal Lap-Shear Joints for Determination of the Stress-Strain Behavior of Adhesives in Shear by Tension Loading
- ASTM D6204-07 Standard Test Method for Rubber-Measurement of Unvulcanized Rheological Properties Using Rotorless Shear Rheometers
- ASTM D7175-15 Standard Test Method for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer
- ASTM E2126-09 Standard Test Methods for Cyclic (Reversed) Load Test for Shear Resistance of Vertical Elements of the Lateral Force Resisting Systems for Buildings
- ASTM D6204-19a Standard Test Method for Rubber—Measurement of Unvulcanized Rheological Properties Using Rotorless Shear Rheometers
- ASTM D6204-19 Standard Test Method for Rubber—Measurement of Unvulcanized Rheological Properties Using Rotorless Shear Rheometers
- ASTM F1995-12 Standard Test Method for Determining the Shear Force of a Surface Mount Device (SMD) in a Membrane Switch
- ASTM D5656-95(2000) Standard Test Method for Thick-Adherend Metal Lap-Shear Joints for Determination of the Stress-Strain Behavior of Adhesives in Shear by Tension Loading
- ASTM D6204-04 Standard Test Method for Rubber8212;Measurement of Unvulcanized Rheological Properties Using Rotorless Shear Rheometers
- ASTM D6204-99 Standard Test Method for Rubber8212;Measurement of Unvulcanized Rheological Properties Using Rotorless Shear Rheometers
- ASTM D6204-01 Standard Test Method for Rubber8212;Measurement of Unvulcanized Rheological Properties Using Rotorless Shear Rheometers
- ASTM D6204-05 Standard Test Method for Rubber8212;Measurement of Unvulcanized Rheological Properties Using Rotorless Shear Rheometers
- ASTM D3528-96 Standard Test Method for Strength Properties of Double Lap Shear Adhesive Joints by Tension Loading
- ASTM D3528-96(2002) Standard Test Method for Strength Properties of Double Lap Shear Adhesive Joints by Tension Loading
- ASTM D2919-01(2023) Standard Test Method for Determining Durability of Adhesive Joints Stressed in Shear by Tension Loading
- ASTM D7608-18 Standard Test Method for Torsional Ring Shear Test to Measure Drained Fully Softened Shear Strength and Stress Dependent Strength Envelope of Fine-Grained Soils
- ASTM D6204-15 Standard Test Method for Rubber&x2014;Measurement of Unvulcanized Rheological Properties Using Rotorless Shear Rheometers
- ASTM D6601-02 Standard Test Method for Rubber Properties-Measurement of Cure and After-Cure Dynamic Properties Using a Rotorless Shear Rheometer
- ASTM D2295-96 Standard Test Method for Strength Properties of Adhesives in Shear by Tension Loading at Elevated Temperatures (Metal-to-Metal)
- ASTM D3528-96(2008) Standard Test Method for Strength Properties of Double Lap Shear Adhesive Joints by Tension Loading
- ASTM D6601-00 Standard Test Method for Rubber Properties-Measurement of Cure and After-Cure Dynamic Properties Using a Rotorless Shear Rheometer
- ASTM D6601-02(2008) Standard Test Method for Rubber Propertiesx2014;Measurement of Cure and After-Cure Dynamic Properties Using a Rotorless Shear Rheometer
- ASTM D1002-10 Standard Test Method for Apparent Shear Strength of Single-Lap-Joint Adhesively Bonded Metal Specimens by Tension Loading (Metal-to-Metal)
- ASTM D3931-08 Standard Test Method for Determining Strength of Gap-Filling Adhesive Bonds in Shear by Compression Loading
- ASTM D6616-20 Standard Test Method for Measuring Viscosity at High Shear Rate by Tapered Bearing Simulator Viscometer at 100 °C
- ASTM D6616-20a Standard Test Method for Measuring Viscosity at High Shear Rate by Tapered Bearing Simulator Viscometer at 100 °C
- ASTM D6616-21 Standard Test Method for Measuring Viscosity at High Shear Rate by Tapered Bearing Simulator Viscometer at 100 ��C
- ASTM D5656-10(2017) Standard Test Method for Thick-Adherend Metal Lap-Shear Joints for Determination of the Stress-Strain Behavior of Adhesives in Shear by Tension Loading
- ASTM D8189-19 Standard Test Method for Tackiness of Asphalt Binders and Emulsified Asphalt Residue Using the Dynamic Shear Rheometer (DSR)
- ASTM D3931-93a(2005) Standard Test Method for Determining Strength of Gap-Filling Adhesive Bonds in Shear by Compression Loading
- ASTM D3931-93a(1999)e1 Standard Test Method for Determining Strength of Gap-Filling Adhesive Bonds in Shear by Compression Loading
- ASTM F1995-00(2005) Standard Test Method for Determining the Bond Strength for a Surface Mount Device (SMD) by Applying Shear Force on a Membrane Switch
- ASTM F1995-00 Standard Test Method for Determining the Bond Strength for a Surface Mount Device (SMD) by Applying Shear Force on a Membrane Switch
- ASTM D4939-89(2003) Standard Test Method for Subjecting Marine Antifouling Coating to Biofouling and Fluid Shear Forces in Natural Seawater
- ASTM D4939-89(1996) Standard Test Method for Subjecting Marine Antifouling Coating to Biofouling and Fluid Shear Forces in Natural Seawater
- ASTM D4939-89(2020) Standard Test Method for Subjecting Marine Antifouling Coating to Biofouling and Fluid Shear Forces in Natural Seawater
- ASTM D3983-98 Standard Test Method for Measuring Strength and Shear Modulus of Nonrigid Adhesives by the Thick-Adherend Tensile-Lap Specimen
- ASTM D3983-98(2004) Standard Test Method for Measuring Strength and Shear Modulus of Nonrigid Adhesives by the Thick-Adherend Tensile-Lap Specimen
- ASTM D906-20 Standard Test Method for Strength Properties of Adhesives in Plywood Type Construction in Shear by Tension Loading
- ASTM D3164-03(2017) Standard Test Method for Strength Properties of Adhesively Bonded Plastic Lap-Shear Sandwich Joints in Shear by Tension Loading
- ASTM D4683-96 Standard Test Method for Measuring Viscosity at High Shear Rate and High Temperature by Tapered Bearing Simulator
- ASTM D906-98(2004) Standard Test Method for Strength Properties of Adhesives in Plywood Type Construction in Shear by Tension Loading
- ASTM D906-98(2011) Standard Test Method for Strength Properties of Adhesives in Plywood Type Construction in Shear by Tension Loading
- ASTM D906-98 Standard Test Method for Strength Properties of Adhesives in Plywood Type Construction in Shear by Tension Loading
- ASTM E74-00a Standard Practice of Calibration of Force-Measuring Instruments for Verifying the Force Indication of Testing Machines
- ASTM D6601-19 Standard Test Method for Rubber Properties—Measurement of Cure and After-Cure Dynamic Properties Using a Rotorless Shear Rheometer
- ASTM D4683-04 Standard Test Method for Measuring Viscosity at High Shear Rate and High Temperature by Tapered Bearing Simulator
- ASTM D1002-05 Standard Test Method for Apparent Shear Strength of Single-Lap-Joint Adhesively Bonded Metal Specimens by Tension Loading (Metal-to-Metal)
- ASTM D1002-99 Standard Test Method for Apparent Shear Strength of Single-Lap-Joint Adhesively Bonded Metal Specimens by Tension Loading (Metal-to-Metal)
- ASTM D1002-01 Standard Test Method for Apparent Shear Strength of Single-Lap-Joint Adhesively Bonded Metal Specimens by Tension Loading (Metal-to-Metal)
- ASTM D3983-98(2011) Standard Test Method for Measuring Strength and Shear Modulus of Nonrigid Adhesives by the Thick-Adherend Tensile-Lap Specimen
- ASTM F1995-13 Standard Test Method for Determining the Shear Strength of the Bond between a Surface Mount Device (SMD) and Substrate in a Membrane Switch
- ASTM D6601-15 Standard Test Method for Rubber Properties&x2014;Measurement of Cure and After-Cure Dynamic Properties Using a Rotorless Shear Rheometer
- ASTM D6278-12e1 Standard Test Method for Shear Stability of Polymer Containing Fluids Using a European Diesel Injector Apparatus
- ASTM D6278-20 Standard Test Method for Shear Stability of Polymer Containing Fluids Using a European Diesel Injector Apparatus
- ASTM D6278-17 Standard Test Method for Shear Stability of Polymer Containing Fluids Using a European Diesel Injector Apparatus
- ASTM D6278-20a Standard Test Method for Shear Stability of Polymer Containing Fluids Using a European Diesel Injector Apparatus
- ASTM D6616-17 Standard Test Method for Measuring Viscosity at High Shear Rate by Tapered Bearing Simulator Viscometer at 100&x2009;&xb0;C
- ASTM D2557-98(2004) Standard Test Method for Tensile-Shear Strength of Adhesives in the Subzero Temperature Range from -267.8 to -55176C (-450 to -67176F)
- ASTM D3518/D3518M-94(2007) Standard Test Method for In-Plane Shear Response of Polymer Matrix Composite Materials by Tensile Test of a 177;45176; Laminate
- ASTM D6616-07 Standard Test Method for Measuring Viscosity at High Shear Rate by Tapered Bearing Simulator Viscometer at 100x00B0;C
- ASTM D8059-19(2022) Standard Test Method for Rubber Compounds—Measurement of Unvulcanized Dynamic Strain Softening (Payne Effect) Using Sealed Cavity Rotorless Shear Rheometers
- ASTM D8059-16 Standard Test Method for Rubber Compounds&x2014;Measurement of Unvulcanized Dynamic Strain Softening (Payne Effect) Using Sealed Cavity Rotorless Shear Rheometers
- ASTM F1995-13(2021) Standard Test Method for Determining the Shear Strength of the Bond between a Surface Mount Device (SMD) and Substrate in a Membrane Switch
- ASTM D3518/D3518M-13 Standard Test Method for In-Plane Shear Response of Polymer Matrix Composite Materials by Tensile Test of a plusmn;45deg; Laminate
- ASTM D7605-11(2022) Standard Test Method for Thermoplastic Elastomers—Measurement of Polymer Melt Rheological Properties and Congealed Dynamic Properties Using Rotorless Shear Rheometers
- ASTM D6616-01 Standard Test Method for Measuring Viscosity at High Shear Rate by Tapered Bearing Simulator Viscometer At 100deg;C
- ASTM D6616-07(2012) Standard Test Method for Measuring Viscosity at High Shear Rate by Tapered Bearing Simulator Viscometer at 100deg;C
- ASTM D3164-03(2011) Standard Test Method for Strength Properties of Adhesively Bonded Plastic Lap-Shear Sandwich Joints in Shear by Tension Loading
- ASTM D8059-19 Standard Test Method for Rubber Compounds—Measurement of Unvulcanized Dynamic Strain Softening (Payne Effect) Using Sealed Cavity Rotorless Shear Rheometers
- ASTM D7605-11(2016) Standard Test Method for Thermoplastic Elastomers—Measurement of Polymer Melt Rheological Properties and Congealed Dynamic Properties Using Rotorless Shear Rheometers
- ASTM D6616-01a(2006) Standard Test Method for Measuring Viscosity at High Shear Rate by Tapered Bearing Simulator Viscometer At 100176;C
- ASTM D7109-07 Standard Test Method for Shear Stability of Polymer Containing Fluids Using a European Diesel Injector Apparatus at 30 and 90 Cycles
- ASTM D7605-10 Standard Test Method for Thermoplastic Elastomersx2014;Measurement of Polymer Melt Rheological Properties and Congealed Dynamic Properties Using Rotorless Shear Rheometers
German Institute for Standardization, Instruments for testing shear force
- DIN EN ISO 20337:2020-01 Fibre-reinforced plastic composites - Shear test method using a shear frame for the determination of the in-plane shear stress/shear strain response and shear modulus (ISO 20337:2018); German version EN ISO 20337:2019
- DIN 52187:1979-05 Testing of wood; determination of ultimate shearing stress parallel to grain
- DIN 51350-6:1996-08 Testing of lubricants - Testing in the Shell four-ball tester - Part 6: Determination of shear stability of lubricating oils containing polymers
- DIN EN 2243-6:2006-07 Aerospace series - Non-metallic materials - Structural adhesives - Test method - Part 6: Determination of shear stress and shear strain; German and English version EN 2243-6:2005
- DIN EN 2243-6:2006 Aerospace series - Non-metallic materials - Structural adhesives - Test method - Part 6: Determination of shear stress and shear strain; German and English version EN 2243-6:2005
- DIN EN 62047-13:2012-10 Semiconductor devices - Micro-electromechanical devices - Part 13: Bend- and shear- type test methods of measuring adhesive strength for MEMS structures (IEC 62047-13:2012); German version EN 62047-13:2012
- DIN EN 15184:2006-11 Products and systems for the protection and repair of concrete structures - Test methods - Shear adhesion of coated steel to concrete (pull-out test); German version EN 15184:2006
- DIN EN ISO 15616-3:2003-05 Acceptance tests for CO<(Index)2>-laser beam machines for high quality welding and cutting - Part 3: Calibration of instruments for measurement of gas flow and pressure (ISO 15616-3:2003); German version EN ISO 15616-3:2003
- DIN EN ISO 376:2011-09 Metallic materials - Calibration of force-proving instruments used for the verification of uniaxial testing machines (ISO 376:2011); German version EN ISO 376:2011 / Note: DIN EN ISO 376 (2005-02) remains valid alongside this standard until 2011-12-31.
- DIN EN 60512-16-5:2009-03 Connectors for electronic equipment - Tests and measurements - Part 16-5: Mechanical tests on contacts and terminations - Test 16e: Gauge retention force (resilient contacts) (IEC 60512-16-5:2008); German version EN 60512-16-5:2008 / Note: DIN IEC 6051...
- DIN EN 846-3:2000-08 Methods of tests for ancillary components for masonry - Part 3: Determination of shear load capacity of welds in prefabricated bed joint reinforcement; German version EN 846-3:2000
- DIN EN ISO 12996:2013 Mechanical joining - Destructive testing of joints - Specimen dimensions and test procedure for tensile shear testing of single joints (ISO 12996:2013); German version EN ISO 12996:2013
- DIN EN ISO 11680-2:2022-05 Machinery for forestry - Safety requirements and testing for pole-mounted powered pruners - Part 2: Machines for use with backpack power source (ISO 11680-2:2021); German version EN ISO 11680-2:2021 / Note: DIN EN ISO 11680-2 (2012-04) remains valid al...
- DIN EN 1894:2005 Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature under inert atmosphere - Determination of shear strength by compression loading of notched specimens; German version EN 1894:2005
- DIN EN ISO 11680-1:2022-05 Machinery for forestry - Safety requirements and testing for pole-mounted powered pruners - Part 1: Machines fitted with an integral combustion engine (ISO 11680-1:2021); German version EN ISO 11680-1:2021 / Note: DIN EN ISO 11680-1 (2012-04) remains v...
Association Francaise de Normalisation, Instruments for testing shear force
- NF T57-401*NF EN ISO 20337:2019 Fibre-reinforced plastic composites - Shear test method using a shear frame for the determination of the in-plane shear stress/shear strain response and shear modulus
- NF EN ISO 20337:2019 Composites plastiques renforcés de fibres - Méthode d'essai de cisaillement à l'aide d'un châssis de cisaillement pour la détermination de la contrainte de cisaillement/déformation au cisaillement dans le plan et du module de cisaillement
- NF T46-023:1971 Determination of modulus in shear of vulcanized rubbers (bonded quadruple shear test piece).
- NF EN 60749-19/A1:2011 Dispositifs à semiconducteurs - Méthodes d'essais mécaniques et climatiques - Partie 19 : résistance de la pastille au cisaillement
- NF EN 60749-19:2003 Dispositifs à semiconducteurs - Méthodes d'essais mécaniques et climatiques - Partie 19 : résistance de la pastille au cisaillement
- NF T54-107:1971 Plastics. Thin sheets. Determination of tear resistance (non perforated test piece).
- NF T46-020:1971 Determination of adhesion of vulcanized rubbers to rigid plates in shear (bonded quadruple shear test piece).
- NF EN ISO 29022:2013 Médecine bucco-dentaire - Adhérence - Essai de résistance au cisaillement sur échantillons à bord entaillé
- NF P94-074:1994 Soils : investigation and testing. Shear strength tests with revolving triaxial test apparatus. Apparatus. Preparation of test specimens. Unconsolidated and undrained (UU) test. Consolidated and undrained (Cu+U) test with measurement of the interstitial p
- NF T76-119:1991 TEST METHOD FOR WOOD ADHESIVES FOR NON-STRUCTURAL APPLICATIONS. DETERMINATION OF TENSILE SHEAR STRENGTH OF LAP JOINTS. (EUROPEAN STANDARD EN 205).
- NF EN 1902:2015 Adhésifs - Méthodes d'essai des adhésifs pour revêtements muraux et de sol - Essai de fluage sous contrainte de cisaillement
- NF EN 15184:2006 Produits et systèmes de protection et la réparation des structures en béton - Méthodes d'essai - Adhérence par cisaillement d'acier revêtu au béton (essai d'arrachement)
- NF L17-300-6*NF EN 2243-6:2006 Aerospace series - Non-metallic materials - Structural adhesives - Test method - Part 6 : determination of shear stress and shear strain.
- NF P30-316:2009 Roofing and wall cladding - Fasteners - Determination of the characteristic resistance of the assembly - Test method for shearing by transverse tensile testing.
- NF EN 17643:2022 Bitumes et liants bitumineux - Détermination de la température d'équi-module de rigidité et de l'angle de phase à l'aide d'un rhéomètre à cisaillement dynamique (DSR) - Essai BTSV
- NF E83-200*NF EN ISO 12996:2013 Mechanical joining - Destructive testing of joints - Specimen dimensions and test procedure for tensile shear testing of single joints
- NF EN 846-7:2013 Méthodes d'essai des composants accessoires de maçonnerie - Partie 7 : détermination de la charge admissible au cisaillement et des caractéristiques effort-déformation des attaches résistant au cisaillement et des attaches de glissement (essai d...
- NF EN 62047-13:2012 Dispositifs à semiconducteurs - Dispositifs microélectromécaniques - Partie 13 : méthodes d'essais de types courbure et cisaillement de mesure de la résistance d'adhérence pour les structures MEMS
- XP P94-424:2003 Roches - Cisaillement direct selon une discontinuité de roche - Essai sous un effort constant, normal à la surface de discontinuité
- NF P12-603*NF EN 846-3:2000 Methods of test for ancillary components for masonry - Part 3 : determination of shear load capacity of welds in prefabricated bed joint reinforcement
- NF P12-605-7*NF EN 846-7:2013 Methods of test for ancillary components for masonry - Part 7 : determination of shear load capacity and load displacement characteristics of shear ties and slip ties (couplet test for mortar joint connections)
- NF EN 2243-6:2006 Série aérospatiale - Matériaux non-métalliques - Système d'adhésifs structuraux - Méthodes d'essai - Partie 6 : détermination de la contrainte et de la déformation de cisaillement
- NF A89-701-3*NF EN ISO 15616-3:2003 Acceptance tests for CO2-laser beam machines for welding and cutting - Part 3 : calibration of instruments for measurement of gas flow and pressure.
- XP CEN/TS 15881:2010 Céramiques techniques avancées - Céramiques composites - Détermination de la contrainte de frottement en cisaillement à l'interface fibre/matrice à température ambiante - Essais de traction sur minicomposites
- NF EN ISO 15616-3:2003 Essais de réception des machines de soudage et de coupage de qualité par faisceau laser CO2 - Partie 3 : étalonnage des instruments de mesure de débit et de pression des gaz d'assistance
- NF ISO 13061-8:2022 Propriétés physiques et mécaniques du bois - Méthodes d'essais sur petites éprouvettes de bois sans défauts - Partie 8 : détermination de la contrainte de rupture en cisaillement parallèle aux fibres
- NF U34-135-1*NF EN ISO 11680-1:2021 Machinery for forestry - Safety requirements and testing for pole-mounted powered pruners - Part 1 : machines fitted with an integral combustion engine
- NF EN ISO 11680-2:2021 Matériel forestier - Exigences de sécurité et essais pour les perches élagueuses à moteur - Partie 2 : machines pour utilisation avec source motrice portée à dos
- NF EN ISO 11680-1:2021 Matériel forestier - Exigences de sécurité et essais pour les perches élagueuses à moteur - Partie 1 : machines équipées d'un moteur à combustion interne intégré
- NF EN 12645:2014 Instruments de mesure de la pression des pneumatiques - Dispositifs de contrôle de la pression et/ou de gonflage/dégonflage des pneumatiques des véhicules motorisés - Métrologie, exigences et essais
- NF U34-135-2*NF EN ISO 11680-2:2021 Machinery for forestry - Safety requirements and testing for pole-mounted powered pruners - Part 2 : machines for use with backpack power source
- NF EN 60512-16-5:2008 Connecteurs pour équipements électroniques - Essais et mesures - Partie 16-5 : essais mécaniques des contacts et des sorties - Essai 16e : force de rétention du calibre (contacts élastiques)
British Standards Institution (BSI), Instruments for testing shear force
- BS EN ISO 20337:2019 Fibre-reinforced plastic composites. Shear test method using a shear frame for the determination of the in-plane shear stress/shear strain response and shear modulus
- BS 903-A14:1992 Physical testing of rubber - Method for determination of modulus in shear or adhesion to rigid plates - Quadruple shear method
- BS EN 2243-6:2005 Aerospace series - Non-metallic materials - Structural adhesives - Test method - Determination of shear stress and shear strain
- BS 2000-536:2005 Methods of test for petroleum and its products. Bitumen and bituminous binders — Determination of complex shear modulus and phase angle — Dynamic Shear Rheometer (DSR) (Identical with IP 536:2005)
- BS EN ISO 12996:2013 Mechanical joining. Destructive testing of joints. Specimen dimensions and test procedure for tensile shear testing of single joints
- BS EN 15301-2:2007 Surfaces for sports areas - Determination of shear strength by dynamic top layer testing of unbound mineral surfaces in the laboratory
- BS EN ISO 15616-3:2003 Acceptance tests for CO2- laser beam machines for high quality welding and cutting - Calibration of instruments for measurement of gas flow and pressure
- 15/30327645 DC BS EN 16917-1. Ophthalmic optics. Instruments and test methods for assessing drivers' vision. Part 1. Visual acuity
- BS IEC 62887:2018 Nuclear power plants. Instrumentation systems important to safety. Pressure transmitters: Characteristics and test methods
ES-UNE, Instruments for testing shear force
- UNE-EN ISO 20337:2020 Fibre-reinforced plastic composites - Shear test method using a shear frame for the determination of the in-plane shear stress/shear strain response and shear modulus (ISO 20337:2018)
- UNE-EN 62047-13:2012 Semiconductor devices - Micro-electromechanical devices - Part 13: Bend- and shear- type test methods of measuring adhesive strength for MEMS structures (Endorsed by AENOR in June of 2012.)
- UNE-EN ISO 11680-1:2022 Machinery for forestry - Safety requirements and testing for pole-mounted powered pruners - Part 1: Machines fitted with an integral combustion engine (ISO 11680-1:2021)
- UNE-EN 60512-16-5:2008 Connectors for electronic equipment - Tests and measurements -- Part 16-5: Mechanical tests on contacts and terminations - Test 16e: Gauge retention force (resilient contacts) (Endorsed by AENOR in February of 2009.)
国家市场监督管理总局、中国国家标准化管理委员会, Instruments for testing shear force
- GB/T 41498-2022 Fibre-reinforced plastic composites—Shear test method using a shear frame for the determination of the in-plane shear stress/shear strain response and shear modulus
RO-ASRO, Instruments for testing shear force
HU-MSZT, Instruments for testing shear force
The American Road & Transportation Builders Association, Instruments for testing shear force
- AASHTO TP 70-2011 Standard Method of Test for Multiple Stress Creep Recovery (MSCR) Test of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)
- AASHTO TP 70-2013 Standard Method of Test for Multiple Stress Creep Recovery (MSCR) Test of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)
- AASHTO T 350-2014 Standard Method of Test for Multiple Stress Creep Recovery (MSCR) Test of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)
- AASHTO TP 70-2007 Standard Method of Test for Multiple Stress Creep Recovery (MSCR) Test of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)
- AASHTO TP 70-2010 Standard Method of Test for Multiple Stress Creep Recovery (MSCR) Test of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) Revision 1
- AASHTO T 315-2010 Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)
- AASHTO T 315-2002 Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) HM-22; Part IIB; Formaly AASHTO TP 5
- AASHTO T 245-2013 Standard Method of Test for Resistance to Plastic Flow of Asphalt Mixtures Using Marshall Apparatus
- AASHTO T 245-2014 Standard Method of Test for Resistance to Plastic Flow of Asphalt Mixtures Using Marshall Apparatus
- AASHTO T 245-2015 Standard Method of Test for Resistance to Plastic Flow of Asphalt Mixtures Using Marshall Apparatus
- AASHTO TP7-2001 Standard Test Method for Determining the Permanent Deformation and Fatigue Cracking Characteristics of Hot Mix Asphalt (HMA) Using the Simple Shear Test (SST) Device 2000 Edition; Interim Edition 4/2001
- AASHTO T 246-2010 Standard Method of Test for Resistance to Deformation and Cohesion of Hot Mix Asphalt (HMA) by Means of Hveem Apparatus
AASHTO - American Association of State Highway and Transportation Officials, Instruments for testing shear force
- T 350-2014 Standard Method of Test for Multiple Stress Creep Recovery (MSCR) Test of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)
- TP 70-2009 Standard Method of Test for Multiple Stress Creep Recovery (MSCR) Test of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)
- TP 70-2011 Standard Method of Test for Multiple Stress Creep Recovery (MSCR) Test of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)
- TP 70-2012 Standard Method of Test for Multiple Stress Creep Recovery (MSCR) Test of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)
- TP 70-2013 Standard Method of Test for Multiple Stress Creep Recovery (MSCR) Test of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)
- TP 70-2007 Standard Method of Test for Multiple Stress Creep Recovery (MSCR) Test of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)
- T 315-2004 Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)
- T 315-2006 Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)
- T 315-2010 Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)
- T 315-2012 Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)
- T 315-2008 Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)
- T 315-2009 Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)
- T 315-2005 Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)
- TP 70-2010 Standard Method of Test for Multiple Stress Creep Recovery (MSCR) Test of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) (Revision 1)
- TP5-1998 Standard Test Method for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)
- TP5-1997 Standard Test Method for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)
- TP5-1993 Standard Test Method for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) (Edition 1B)
- TP 123-2016 Standard Method of Test for Measuring Asphalt Binder Yield Energy and Elastic Recovery Using the Dynamic Shear Rheometer
- TP 126-2017 Standard Method of Test for Evaluation of the Tracking Resistance of Hot-Poured Asphalt Crack Sealant by Dynamic Shear Rheometer (DSR)
- TP 126-2018 Standard Method of Test for Evaluation of the Tracking Resistance of Hot-Poured Asphalt Crack Sealant by Dynamic Shear Rheometer (DSR)
- T 315-2002 Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) (HM-22; Part IIB; Formaly AASHTO TP 5)
- T 246-2007 Standard Method of Test for Resistance to Deformation and Cohesion of Bituminous Mixtures by Means of Hveem Apparatus
- T 245-1997 Standard Method of Test for Resistance to Plastic Flow of Bituminous Mixtures Using Marshall Apparatus
- T 245-2014 Standard Method of Test for Resistance to Plastic Flow of Asphalt Mixtures Using Marshall Apparatus
- T 245-2013 Standard Method of Test for Resistance to Plastic Flow of Asphalt Mixtures Using Marshall Apparatus
- T 246-2010 Standard Method of Test for Resistance to Deformation and Cohesion of Hot Mix Asphalt (HMA) by Means of Hveem Apparatus
(U.S.) Ford Automotive Standards, Instruments for testing shear force
Standard Association of Australia （SAA）, Instruments for testing shear force
- AS 1289.6.2.2:1998 Methods of testing soils for engineering purposes - Soil strength and consolidation tests - Determination of shear strength of a soil - Direct shear test using a shear box
- AS 3534:1988 Acoustics - Methods for measurement of airborne noise emitted by powered lawnmowers, edge and brush cutters and string trimmers
GM North America, Instruments for testing shear force
- GM GM9521P-1992 Shear Adhesion Test for Adhesives Used in Glass Bonding Procedure
- GM9521P-2007 Shear Adhesion Test for Adhesives Used in Glass Bonding Procedure
Group Standards of the People's Republic of China, Instruments for testing shear force
- T/CSTM 00822-2022 Shearing test method for titanium columbium solid rivets for civil aircraft
European Committee for Standardization (CEN), Instruments for testing shear force
- EN 846-7:2012 Methods of test for ancillary components for masonry - Part 7: Determination of shear load capacity and load displacement characteristics of shear ties and slip ties (couplet test for mortar joint connections)
- EN 2243-6:2005 Aerospace series - Non-metallic materials - Structural adhesives - Test method - Part 6: Determination of shear stress and shear strain
- EN 846-7:2000 Methods of Test for Ancillary Components for Masonry - Part 7: Determination of Shear Load Capacity and Load Displacement Characteristics of Shear Ties and Slip Ties (Couplet Test for Mortar Joint Connections)
RU-GOST R, Instruments for testing shear force
- PNST 88-2016 Automobile roads of general use.Petroleum-based bitumen binders. The method determining of the properties of recovery via impacts multiple shear stress (MSCR) using dynamic shear rheometer (DSR)
- GOST R ISO 6311-1993 Road vehicles. Brake linings. Internal shear strength of lining material. Test procedure
- GOST R 57950-2017 Plastics. Determination of dynamic mechanical properties. Part 10. Complex shear viscosity using a parallel-plate oscillatory rheomete
- GOST 8008-1975 Power transformers. Test methods of tap changing devices
- GOST 34746-2021 Agricultural machinery. Machines and equipment for pruning fruit trees and grape bushes, removing, chopping scraps of vines and branches. Test methods
Danish Standards Foundation, Instruments for testing shear force
- DS/EN 2243-6:2005 Aerospace series - Non-metallic materials - Structural adhesives - Test method - Part 6: Determination of shear stress and shear strain
- DS/EN ISO 14129:1998 Fibre-reinforced plastic composites - Determination of the in-plane shear stress/shear strain response, including the in-plane shear modulus and strength, by the +/- 45º tension test method
- DS/EN ISO 15616-3:2003 Acceptance tests for CO2-laser beam machines for high quality welding and cutting - Part 3: Calibration of instruments for measurement of gas flow and pressure
- DS/EN 846-7:2012 Methods of test for ancillary components for masonry - Part 7: Determination of shear load capacity and load displacement characteristics of shear ties and slip ties (couplet test for mortar joint connections)
- DS/EN 62047-13:2012 Semiconductor devices - Micro-electromechanical devices - Part 13: Bend- and shear- type test methods of measuring adhesive strength for MEMS structures
- DS/EN 846-3:2002 Methods of test for ancillary components for masonry - Part 3: Determination of shear load capacity of welds in prefabricated bed joint reinforcement
- DS/EN 15184:2006 Products and systems for the protection and repair of concrete structures - Test methods - Shear adhesion of coated steel to concrete (pull-out test)
- DS/CWA 50272:2021 Methodology, procedures and equipment required for the laboratory testing of a modular and crosscutting Power Take-Off for wave energy converters
Lithuanian Standards Office , Instruments for testing shear force
- LST EN 2243-6-2005 Aerospace series - Non-metallic materials - Structural adhesives - Test method - Part 6: Determination of shear stress and shear strain
- LST EN 846-7-2012 Methods of test for ancillary components for masonry - Part 7: Determination of shear load capacity and load displacement characteristics of shear ties and slip ties (couplet test for mortar joint connections)
- LST EN 846-3-2000 Methods of test for ancillary components for masonry - Part 3: Determination of shear load capacity of welds in prefabricated bed joint reinforcement
- LST EN ISO 15616-3:2003 Acceptance tests for CO2-laser beam machines for high quality welding and cutting - Part 3: Calibration of instruments for measurement of gas flow and pressure (ISO 15616-3:2003)
- LST EN 15184-2007 Products and systems for the protection and repair of concrete structures - Test methods - Shear adhesion of coated steel to concrete (pull-out test)
- LST EN 62047-13-2012 Semiconductor devices - Micro-electromechanical devices -- Part 13: Bend- and shear- type test methods of measuring adhesive strength for MEMS structures (IEC 62047-13:2012)
AENOR, Instruments for testing shear force
- UNE-EN 2243-6:2006 Aerospace series - Non-metallic materials - Structural adhesives - Test method - Part 6: Determination of shear stress and shear strain
- UNE-EN 846-7:2015 Methods of test for ancillary components for masonry - Part 7: Determination of shear load capacity and load displacement characteristics of shear ties and slip ties (couplet test for mortar joint connections)
- UNE-EN 846-3:2001 Methods of test for ancillary components for masonry - Part 3: Determination of shear load capacity of welds in prefabricated bed joint reinforcement.
- UNE-EN ISO 15616-3:2003 Acceptance tests for CO2-laser beam machines for high quality welding and cutting - Part 3: Calibration of instruments for measurement of gas flow and pressure (ISO 15616-3:2003)
- UNE-EN 15184:2008 Products and systems for the protection and repair of concrete structures - Test methods - Shear adhesion of coated steel to concrete (pull-out test)
Japanese Industrial Standards Committee (JISC), Instruments for testing shear force
- JIS K 7019:1999 Fiber-reinforced plastic composites -- Determination of the in-plane shear stress/shear strain response, including the in-plane shear modulus and strength, by the plus and minus 45 degree SIGN tension test method
- JIS B 7728:2013 Calibration of force-proving instruments used for the verification of uniaxial testing machines
- JIS B 7728:2002 Calibration of force-proving instruments used for the verification of uniaxial testing machines
Korean Agency for Technology and Standards (KATS), Instruments for testing shear force
- KS F 2393-2014 Standard test method for rheological properties of asphalt binder using dynamic shear rheometer
- KS M ISO 14129:2011 Fibre-reinforced plastic composites-Determination of the in-plane shear stress/shear strain response, including the in-plane shear modulus and strength, by the ±45° tension test method
- KS M ISO 14129:2016 Fibre-reinforced plastic composites－Determination of the in-plane shear stress/shear strain response, including the in-plane shear modulus and strength, by the ±45° tension test method
- KS M ISO 6721-10:2003 Plastics-Determination of dynamic mechanical properties-Part 10:Complex shear viscosity using a parallel plate oscillatory rheometer
- KS M ISO 6721-10:2016 Plastics－Determination of dynamic mechanical properties－Part 10：Complex shear viscosity using a parallel plate oscillatory rheometer
- KS B 5648-2002(2017) Pressure test method and vacuum vessel leak detection methodusing mass spectrometer
- KS B 0951-2008(2018) Instrumented indentation tests on welds in steel－Measurement of residual stress on welded joints
- KS B ISO 15616-3-2008(2018) Acceptance tests for CO2-laser beam machines for high quality welding and cutting－Part 3：Calibration of instruments for measurement of gas flow and pressure
- KS C IEC 61468-2006(2016) Nuclear power plants－In-core instrumentation－Characteristics and test methods of self-powered neutron detectors
- KS F 2335-1995 Testing methods for resistance to deformation and cohesion of bituminous mixtures by means of Hveem apparatus
- KS B 5648-2002(2022) Pressure test method and vacuum vessel leak detection methodusing mass spectrometer
- KS B ISO 15616-3:2008 Acceptance tests for CO2-laser beam machines for high quality welding and cutting－Part 3：Calibration of instruments for measurement of gas flow and pressure
Aerospace, Security and Defence Industries Association of Europe (ASD), Instruments for testing shear force
- ASD-STAN PREN 2243-6-2001 Aerospace Series Non-Metallic Materials Structural Adhesives Test Method Part 6: Determination of Shear Stress and Shear Strain (Edition P 2)
KR-KS, Instruments for testing shear force
- KS M ISO 6721-10-2016 Plastics－Determination of dynamic mechanical properties－Part 10：Complex shear viscosity using a parallel plate oscillatory rheometer
- KS M 2458-2023 Petroleum products and related products — Determination of multiple stress creep and recovery (MSCR) of asphalt using a dynamic shear rheometer
- KS B ISO 15616-3-2008(2023) Acceptance tests for CO2-laser beam machines for high quality welding and cutting－Part 3：Calibration of instruments for measurement of gas flow and pressure
ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, Instruments for testing shear force
- PREN 2243-6-2001 Aerospace Series Non-Metallic Materials Structural Adhesives Test Method Part 6: Determination of Shear Stress and Shear Strain (Edition P 2)
CZ-CSN, Instruments for testing shear force
- CSN 66 8510-1960 Method of test for strength properties of adhesives in shear by tension loading (metal to metal)
- CSN 66 8508-1969 Method of test for strength properties of adhesives in shear by tension loading (wood to wood)
- CSN 35 6512-1988 Electronic measuring instruments. General requirements on firmness and resistance at performance of mechanical influences and testing methods
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Instruments for testing shear force
- GB/T 18310.3-2001 Fibre optic interconnecting devices and passive components--Basic test and measurement procedures Part 2-3: Tests--Static shear load
中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Instruments for testing shear force
- GB/T 33061.10-2016 Plastics—Determination of dynamic mechanical properties—Part 10: Complex shear viscosity using a parallel-plate oscillatory rheometer
International Electrotechnical Commission (IEC), Instruments for testing shear force
- IEC 61300-2-3:1995 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-3: Tests - Static shear load
ZA-SANS, Instruments for testing shear force
- SANS 10183-4-5:2009 Adhesives for wood Part 4-5: Test methods - Static load test of multiple bondline specimens in compression shear
American National Standards Institute （ANSI), Instruments for testing shear force
International Organization for Standardization (ISO), Instruments for testing shear force
- ISO 12996:2013 Mechanical joining.Destructive testing of joints.Specimen dimensions and test procedure for tensile shear testing of single joints
- ISO 15616-3:2003 Acceptance tests for CO<(Index)2>-laser beam machines for high quality welding and cutting - Part 3: Calibration of instruments for measurement of gas flow and pressure
未注明发布机构, Instruments for testing shear force
- BS EN ISO 15616-3:2003(2009) Acceptance tests for CO2 - laser beam machines for high quality welding and cutting — Part 3 : Calibration ofinstruments for measurement ofgas flow and pressure
- BS EN ISO 11680-2:2011(2015) Machinery for forestry — Safety requirements and testing for pole - mounted powered pruners Part 2 : Machines for use with back - pack power source
United States Navy, Instruments for testing shear force
IN-BIS, Instruments for testing shear force
NL-NEN, Instruments for testing shear force
- NEN 2873-1982 Testing of stony materials - Skid-resistance apparatus according Leroux and determination of surf ace frictional properties