ZH
RU
ES

Implementation Standard 703

Implementation Standard 703, Total:452 items.

In the international standard classification, Implementation Standard 703 involves: Sterilization and disinfection, Analytical chemistry, Quality, Radiation measurements, Law. Administration, Terminology (principles and coordination), Company organization and management, Construction materials, Linear and angular measurements, Acoustics and acoustic measurements, Test conditions and procedures in general, Road vehicle systems, Water quality, Environmental testing, Shipbuilding and marine structures in general, Standardization. General rules, Transport, Postal services, Road engineering, Corrosion of metals, Education, Power transmission and distribution networks, Information technology (IT) in general, First aid, Fuels, Aircraft and space vehicles in general, Safety of machinery, Protection against dangerous goods, Electronic components in general, Mechanical testing, Information sciences. Publishing, Graphic technology, Applications of information technology, Occupational safety. Industrial hygiene, Integrated circuits. Microelectronics, Farming and forestry, Environmental protection, Geology. Meteorology. Hydrology, Welding, brazing and soldering, Elements of buildings, Construction industry, Fruits. Vegetables, Technical drawings, Open systems interconnection (OSI), Nuclear energy engineering, Valves, Astronomy. Geodesy. Geography, Protection against crime, Services, Radiocommunications, Electrical engineering in general, Resistors, Mobile services, Electromagnetic compatibility (EMC), Software development and system documentation, Hospital equipment, Interface and interconnection equipment, Protective equipment, Languages used in information technology, Character sets and information coding, Protection of and in buildings, Products of the chemical industry, Finances. Banking. Monetary systems. Insurance, Industrial automation systems, Medical sciences and health care facilities in general, Equipment for entertainment, Motor cycles and mopeds, Cycles, Kitchen equipment.

US-DOT, Implementation Standard 703

DOT 49 CFR PART 554-2010 STANDARDS ENFORCEMENT AND DEFECTS INVESTIGATION
DOT 49 CFR PART 383-2010 COMMERCIAL DRIVER扴 LICENSE STANDARDS; REQUIREMENTS AND PENALTIES

American National Standards Institute （ANSI), Implementation Standard 703

ANSI/AIHA Z9.11-2008 Laboratory Decommissioning Standard
ANSI N13.41-2011 Criteria for Performing Multiple Dosimetry
ANSI/GEIA STD-0010-2009 Standard Best Practices for System Safety Program Development and Execution
ANSI/DS-1/NCEES MLSE3-2009 Standards of Licensure as a Model Law Structural Engineer
BS ISO/IEC 18013-2:2020+A1:2023 Personal identification. ISO-compliant driving licence Machine-readable technologies (British Standard)
ANSI/IEEE 1394.1:2004 Standard for High Performance Serial Bus Bridges
ANSI/IEEE 1394:2008 Standard for a High Performance Serial Bus

ZA-SANS, Implementation Standard 703

SANS 10400afr:1990 SUID-AFRIKAANSE BURO VIR STANDAARD Gebruikskode vir Die toepassing van die Nasionale Bouregulasies
SANS 24729-2:2009 Information technology - Radio frequency identification for item management - Implementation guidelines Part 2: Recycling and RFID tags

Group Standards of the People's Republic of China, Implementation Standard 703

T/ZHAS 22-2023 Enterprise implementation standards and benchmarking implementation specifications
T/YCLCX 05-2023 Seven Implementation Standards for the Planting of Mujiang Seed
T/CMABZ 015-2022 Certification Standards for Sports Art Training and Evaluation Executing Institutions
T/QZZN 04-2022 Manufacturing Execution System (MES) Evaluation Criteria
T/CFAS 0004-2018 Urban management integrated administrative law enforcement grid service management system standard Part 4:Law enforcement components
T/CFAS 0003-2018 Urban management integrated administrative law enforcement grid service management system standard Part 3:Law enforcement matters
T/BCEA 001-2021 Evaluation Standard for Practice Ability of Constructor
T/PCO 020-2020 Standard for rating the competence of practicing lawyers
T/GB 118-2020 Standard for rating the competence of practicing lawyers
T/CFAS 0002-2018 Urban management integrated administrative law enforcement grid service management system standard Part 2:Regulatory process
T/CFAS 0005-2018 Urban management integrated administrative law enforcement grid service management system standard Part 1: Management grid
T/CFAS 0001-2018 Urban management integrated administrative law enforcement grid service management system standard Part 1:Command centre
T/CFAS 0006-2018 Urban management integrated administrative law enforcement grid service management system standard Part 6: Performance evaluation
T/CSZX 001.2-2021 The second part of the standardization and standardization construction specification of the grassroots sub-bureau of the Market Supervision Administration: Administrative Law Enforcement
T/JXSSBPPXH 001-2023 Management Standards for Trademark Agency Industry

Sichuan Provincial Standard of the People's Republic of China, Implementation Standard 703

DB51/T 2721-2020 Sichuan Provincial Administrative Law Enforcement Process Standards
DB51/T 2722-2020 Standards of Administrative Law Enforcement Documents in Sichuan Province

GB-REG, Implementation Standard 703

REG 29 CFR PART 1952-2011 APPROVED STATE PLANS FOR ENFORCEMENT OF STATE STANDARDS
REG 29 CFR PART 1902-2011 STATE PLANS FOR THE DEVELOPMENT AND ENFORCEMENT OF STATE STANDARDS
REG 47 CFR PART 202-2011 NATIONAL SECURITY AND EMERGENCY PREPAREDNESS PLANNING AND EXECUTION
REG 49 CFR PART 383-2011 COMMERCIAL DRIVER扴 LICENSE STANDARDS; REQUIREMENTS AND PENALTIES
REG 36 CFR PART 905-2011 STANDARDS OF CONDUCT
REG 29 CFR PART 458-2011 STANDARDS OF CONDUCT
REG 29 CFR PART 6-2011 RULES OF PRACTICE FOR ADMINISTRATIVE PROCEEDINGS ENFORCING LABOR STANDARDS IN FEDERAL AND FEDERALLY ASSISTED CONSTRUCTION CONTRACTS AND FEDERAL SERVICE CONTRACTS
REG 29 CFR PART 1956-2011 STATE PLANS FOR THE DEVELOPMENT AND ENFORCEMENT OF STATE STANDARDS APPLICABLE TO STATE AND LOCAL GOVERNMENT EMPLOYEES IN STATES WITHOUT APPROVED PRIVATE EMPLOYEE PLANS
REG 29 CFR PART 1400-2011 STANDARDS OF CONDUCT, RESPONSIBILITIES, AND DISCIPLINE

International Organization for Standardization (ISO), Implementation Standard 703

ISO/TR 31004:2013 Risk management.Guidance for the implementation of ISO 31000
ISO/PAS 28004-4:2012 Security management systems for the supply chain - Guidelines for the implementation of ISO 28000 - Part 4: Additional specific guidance on implementing ISO 28000 if compliance with ISO 28001 is a management objective
ISO 30004:2012 Ships and marine technology - Ship recycling management systems - Guidelines for the implementation of ISO 30000
ISO/IEC ISP 10615-3:1996 Information technology - International standardized profiles ADInn - OSI directory - Part 3: ADI21 - DSA performer role
ISO/IEC 18013-5:2021 Personal identification — ISO-compliant driving licence — Part 5: Mobile driving licence (mDL) application
ISO/PAS 28004-2:2012 Security management systems for the supply chain - Guidelines for the implementation of ISO 28000 - Part 2: Guidelines for adopting ISO 28000 for use in medium and small seaport operations
ISO/IEC Guide 59:1994 Code of good practice for standardization
ISO/IEC TR 24729-4:2009 Information technology - Radio frequency identification for item management - Implementation guidelines - Part 4: Tag data security

Japanese Industrial Standards Committee (JISC), Implementation Standard 703

JIS A 7201:2021 Standard practice for execution of precast concrete piles
JIS Q 17020:2000 General criteria for the operation of various types of bodies performing inspection
JIS Q 17020:2012 Conformity assessment -- Requirements for the operation of various types of bodies performing inspection
JIS Z 9114:1969 Lighting for pedestrian crossing
JIS B 3700-22:2000 Industrial automation systems and integration -- Product data representation and exchange -- Part 22: Implementation methods: Standard data access interface

American Society for Testing and Materials (ASTM), Implementation Standard 703

ASTM E2386-04(2011) Standard Guide for the Conduct of PDD Screening Examinations
ASTM ANSI/ISO/IEC 17020-98 General criteria for the operation of various types of bodies performing inspection
ASTM ANSI/ISO/IEC17020-98 General criteria for the operation of various types of bodies performing inspection
ASTM E1169-13a Standard Practice for Conducting Ruggedness Tests
ASTM D5851-95(2006) Standard Guide for Planning and Implementing a Water Monitoring Program
ASTM D5851-95(2011) Standard Guide for Planning and Implementing a Water Monitoring Program
ASTM G60-01(2013) Standard Practice for Conducting Cyclic Humidity Exposures
ASTM D5851-95(2015) Standard Guide for Planning and Implementing a Water Monitoring Program
ASTM F1254-90(2001) Standard Practice for Performance of Prehospital Manual Defibrillation (Withdrawn 2007)
ASTM E1927-98(2012) Standard Guide for Conducting Subjective Pavement Ride Quality Ratings
ASTM G87-02(2013) Standard Practice for Conducting Moist SO2 Tests
ASTM F1653-95(2002) Standard Guide for Scope of Performance of Triage in Prehospital Environment
ASTM F1653-95(2007) Standard Guide for Scope of Performance of Triage in a Prehospital Environment
ASTM D8428-21 Standard Guide for Establishing Analyst Competence to Perform a Test Method
ASTM D4749-87(1994)e1 Standard Test Method for Performing the Sieve Analysis of Coal and Designating Coal Size
ASTM D4749/D4749M-87(2019)e1 Standard Test Method for Performing the Sieve Analysis of Coal and Designating Coal Size
ASTM E2590-08 Standard Guide for Conducting Hazard Analysis-Critical Control Point (HACCP) Evaluations
ASTM E2590-15 Standard Guide for Conducting Hazard Analysis-Critical Control Point (HACCP) Evaluations
ASTM G195-13 Standard Guide for Conducting Wear Tests Using a Rotary Platform Abraser
ASTM E1804-16 Standard Practice for Performing and Reporting Cost Analysis During the Design Phase of a Project
ASTM E1804-02 Standard Practice for Performing and Reporting Cost Analysis During the Design Phase of a Project
ASTM E1804-96 Standard Practice for Performing and Reporting Cost Analysis During the Design Phase of a Project
ASTM D7728-18 Standard Guide for Selection of ASTM Analytical Methods for Implementation of International Cyanide Management Code Guidance
ASTM E1804-07 Standard Practice for Performing and Reporting Cost Analysis During the Design Phase of a Project
ASTM E1804-12 Standard Practice for Performing and Reporting Cost Analysis During the Design Phase of a Project
ASTM E2327-15 Standard Practice for Quality Assurance of Laboratories Performing Seized-Drug Analysis
ASTM E2327-15e1 Standard Practice for Quality Assurance of Laboratories Performing Seized-Drug Analysis
ASTM F1654-95(2007) Standard Guide for Training and Evaluation of Individuals Who are Responsible for or Perform Triage in a Prehospital Environment
ASTM F1654-95 Standard Guide for Training and Evaluation of Individuals Who are Responsible for or Perform Triage in Prehospital Environment
ASTM D6568-00(2011) Standard Guide for Planning, Carrying Out, and Reporting Traceable Chemical Analyses of Water Samples
ASTM D5277-92(2002) Standard Test Method for Performing Programmed Horizontal Impacts Using an Inclined Impact Tester
ASTM F1287-90(2012) Standard Guide for Scope of Performance of First Responders Who Provide Emergency Medical Care
ASTM D5498-09 Standard Guide for Developing a Training Program for Personnel Performing Coating Work Inspection for Nuclear Facilities
ASTM F1654-95(2002) Standard Guide for Training and Evaluation of Individuals Who are Responsible for or Perform Triage in Prehospital Environment
ASTM F1420-01 Standard Guide for Training the Emergency Medical Technician (Basic) to Perform Patient Management Techniques (Withdrawn 2007)
ASTM E3141/E3141M-23 Standard Test Method for Ballistic Resistant Shields for Law Enforcement
ASTM E3141/E3141M-22 Standard Test Method for Ballistic Resistant Shields for Law Enforcement
ASTM E3141/E3141M-22a Standard Test Method for Ballistic Resistant Shields for Law Enforcement
ASTM E3141/E3141M-18 Standard Test Method for Ballistic Resistant Shields for Law Enforcement
ASTM E3348/E3348M-22 Standard Guide for Body Armor for Non-Law Enforcement First Responders
ASTM F1219-00 Standard Guide for Training the Emergency Medical Technician (Basic) to Perform Patient Initial and Detailed Assessment (Withdrawn 2006)
ASTM E3347/E3347M-22 Standard Specification for Ballistic-Resistant Shields Used by Law Enforcement Officers
ASTM E3347/E3347M-23 Standard Specification for Ballistic-Resistant Shields Used by Law Enforcement Officers
ASTM F1616-95(2002) Standard Guide for Scope of Performance of First Responders Who Practice in the Wilderness or Delayed or Prolonged Transport Settings
ASTM F1616-95 Standard Guide for Scope of Performance of First Responders Who Practice in the Wilderness or Delayed or Prolonged Transport Settings
ASTM F1616-95(2009) Standard Guide for Scope of Performance of First Responders Who Practice in the Wilderness or Delayed or Prolonged Transport Settings
ASTM E310-21 Standard Reference Radiographs for Tin Bronze Castings
ASTM E3109-18 Standard Specification for Protective Gloves Worn by Law Enforcement and Corrections Officers
ASTM E2538-06 Standard Practice for Defining and Implementing Pharmacotherapy Information Services within the Electronic Health Record (EHR) Environment and Networked Architectures
ASTM F1321-13 Standard Guide for Conducting a Stability Test lpar;Lightweight Survey and Inclining Experimentrpar; to Determine the Light Ship Displacement and Centers of Gravity of a Vessel
ASTM F3060-14 Standard Terminology for Aircraft
ASTM F3060-15 Standard Terminology for Aircraft
ASTM F3060-15a Standard Terminology for Aircraft
ASTM E2606-08 Standard Practice for Receipt Notification as a Result of Tangible Property Movement
ASTM E2606-13 Standard Practice for Receipt Notification as a Result of Tangible Asset Movement
ASTM E329-11b Standard Specification for Agencies Engaged in Construction Inspection, Testing, or Special Inspection
ASTM E2013-20 Standard Practice for Developing Functions, Constructing FAST Diagrams, and Performing Function Analysis During Value Engineering (VE)/Value Analysis (VA) Study
ASTM F1321-14 Standard Guide for Conducting a Stability Test 40;Lightweight Survey and Inclining Experiment41; to Determine the Light Ship Displacement and Centers of Gravity of a Vessel
ASTM F2793-14(2023) Standard Specification for Bicycle Grips
ASTM F2043-13(2018) Standard Classification for Bicycle Usage
ASTM F2930-12 Standard Guide for Compliance with Light Sport Aircraft Standards
ASTM E329-14a Standard Specification for Agencies Engaged in Construction Inspection, Testing, or Special Inspection
ASTM F2501-06 Standard Practices for Unmanned Aircraft System Airworthiness

GM Daewoo, Implementation Standard 703

GMKOREA EDS-T-3251-2012

IX-EU/EC, Implementation Standard 703

2000/693/EC-2000 Commission Decision on Withdrawing the References of Standard EN 703 'Agricultural Machinery - Silage Cutters - Safety' from the List of References of Standards in the Framework of Implementing Directive 98/37/EC
M 302-1999 STANDARDISATION MANDATE GIVEN TO THE EUROPEAN COMMITTEE FOR STANDARDISATION (CEN) UNDER EC DIRECTIVE 98/37 RELATING TO MACHINERY WITH A VIEW TO REVISION OF STANDARD EN 703 ON THE SAFETY OF SILAGE CUTTERS
M 397-2006 Mandate to CENELEC in the field of the Low Voltage Directive 73/23/EC
M 108-1996 MANDATE TO CEN/CENELEC CONCERNING THE EXECUTION OF STANDARDISATION WORK FOR HARMONIZED STANDARDS ON CURTAIN WALLING
M 112-1997 MANDATE TO CEN/CENELEC CONCERNING THE EXECUTION OF STANDARDISATION WORK FOR HARMONIZED STANDARDS ON STRUCTURAL TIMBER PRODUCTS and ancillaries
M 119-1997 MANDATE TO CEN/CENELEC CONCERNING THE EXECUTION OF STANDARDISATION WORK FOR HARMONIZED STANDARDS ON FLOORINGS
M 125-1998 MANDATE TO CEN/CENELEC CONCERNING THE EXECUTION OF STANDARDISATION WORK FOR HARMONIZED STANDARDS ON AGGREGATES
M127-1999 MANDATE TO CEN/CENELEC CONCERNING THE EXECUTION OF STANDARDISATION WORK FOR HARMONIZED STANDARDS ON CONSTRUCTION ADHESIVES
M 104-1995 MANDATE TO CEN/CENELEC CONCERNING THE EXECUTION OF STANDARDISATION WORK FOR A HARMONISED STANDARD ON STRUCTURAL BEARINGS
M 106-1995 MANDATE TO CEN/CENELEC CONCERNING THE EXECUTION OF STANDARDISATION WORK FOR A HARMONIZED STANDARDS ON GYPSUM PRODUCTS
M 107-1996 MANDATE TO CEN/CENELEC CONCERNING THE EXECUTION OF STANDARDISATION WORK FOR HARMONIZED STANDARDS ON GEOTEXTILES
M 110-1996 MANDATE TO CEN/CENELEC CONCERNING THE EXECUTION OF STANDARDISATION WORK FOR HARMONIZED STANDARDS ON SANITARY APPLIANCES
M 111-1996 MANDATE TO CEN/CENELEC CONCERNING THE EXECUTION OF STANDARDISATION WORK FOR HARMONIZED STANDARDS ON CIRCULATION FIXTURES
M 113-1997 MANDATE TO CEN/CENELEC CONCERNING THE EXECUTION OF STANDARDISATION WORK FOR HARMONIZED STANDARDS ON WOOD-BASED PANELS
M 403-2007 Standardisation mandate addressed to CEN, CENELEC and ETSI in the field of Information and Communication Technologies
M 400-2007 MANDATE TO CEN FOR STANDARDISATION IN THE FIELD OF GAS QUALITIES
M 118-2003 MANDATE TO CEN/CENELEC CONCERNING THE EXECUTION OF STANDARDISATION WORKFOR HARMONIZED STANDARDS ON WASTE WATER ENGINEERING PRODUCTS
M 124-1998 MANDATE TO CEN/CENELEC CONCERNING THE EXECUTION OF STANDARDISATION WORK FOR HARMONIZED STANDARDS ON ROAD CONSTRUCTION PRODUCTS
M 129-1999 MANDATE TO CEN/CENELEC CONCERNING THE EXECUTION OF STANDARDISATION WORK FOR HARMONIZED STANDARDS ON SPACE HEATING APPLIANCES
M 047-1994 MANDATE TO CENELEC FOR THE ELABORATION AND ADOPTION OF MEASUREMENT STANDARDS FOR HOUSEHOLD WASHING MACHINES
M 048-1995 MANDATE TO CENELEC FOR THE ELABORATION AND ADOPTION OF MEASUREMENT STANDARDS FOR HOUSEHOLD DRYERS
M 049-1994 MANDATE TO CENELEC FOR THE ELABORATION AND ADOPTION OF MEASUREMENT STANDARDS FOR HOUSEHOLD DISHWASHERS
91/692/EEC-1991 Council Directive Standardizing and Rationalizing Reports on the Implementation of Certain Directives Relating to the Environment
M 103-1994 MANDATE TO CEN/CENELEC CONCERNING THE EXECUTION OF STANDARDISATION WORK ON CONSTRUCTION PRODUCTS INTENDED TO BE USED FOR FLOOR BEDS (INCLUDING SUSPENDED GROUND FLOORS), ROADS AND OTHER TRAFFICKED AREAS
M 105-1995 MANDATE TO CEN/CENELEC CONCERNING THE EXECUTION OF STANDARDISATION WORK FOR A HARMONISED STANDARD ON CHIMNEYS, FLUES AND SPECIFIC PRODUCTS
M 115-1997 MANDATE TO CEN/CENELEC CONCERNING THE EXECUTION OF STANDARDISATION WORKFOR HARMONIZED STANDARDS ON REINFORCING AND PRESTRESSING STEEL (FOR CONCRETE)
M 116-1997 MANDATE TO CEN/CENELEC CONCERNING THE EXECUTION OF STANDARDISATION WORK FOR HARMONIZED STANDARDS ON MASONRY AND RELATED PRODUCTS
M 120-1998 MANDATE TO CEN/CENELEC CONCERNING THE EXECUTION OF STANDARDISATION WORK FOR HARMONIZED STANDARDS ON STRUCTURAL METALLIC PRODUCTS and ancillaries
M 121-1998 MANDATE TO CEN/CENELEC CONCERNING THE EXECUTION OF STANDARDISATION WORK FOR HARMONIZED STANDARDS ON INTERNAL AND EXTERNAL WALL AND CEILING FINISHES
M 396-2006 Mandate to CEN and Cenelec for standardisation in the field of machinery
M 399-2007 MANDATE TO CEN AND CENELEC FOR STANDARDISATION IN THE FIELD OF AGRICULTURAL TRACTORS - HAZARDOUS SUBSTANCES
M 046-1994 MANDATE TO CEN/CENELEC FOR THE ELABORATION AND ADOPTION OF MEASUREMENT STANDARDS FOR HOUSEHOLD REFRIGERATORS AND FREEZERS
M 398-2006 MANDATE TO CEN AND CENELEC FOR STANDARDISATION IN THE FIELD OF AGRICULTURAL TRACTORS - ROLL-OVER PROTECTION FOR PASSENGERS
M 114-1997 MANDATE TO CEN/CENELEC CONCERNING THE EXECUTION OF STANDARDISATION WORK FOR HARMONIZED STANDARDS ON CEMENT, BUILDING LIMES AND OTHER HYDRAULIC BINDERS
M 131-1999 MANDATE TO CEN/CENELEC CONCERNING THE EXECUTION OF STANDARDISATION WORK FOR HARMONIZED STANDARDS ON PIPES, TANKS and ANCILLARIES not in contact with water intended for human consumption
M 135-2000 MANDATE TO CEN/CENELEC CONCERNING THE EXECUTION OF STANDARDISATION WORK FOR HARMONISED STANDARDS ON FLAT GLASS, PROFILED GLASS AND GLASS BLOCK PRODUCTS
M 311-2001 STANDARDISATION MANDATE AWARDED TO THE CEN WITHIN THE FRAMEWORK OF DIRECTIVE 98/37/EC RELATING TO MACHINERY, WITH A VIEW TO REVISION OF EN STANDARD 848-3:1999 CONCERNING THE SAFETY OF WOODWORKING MACHINES
2004/213/EC-2004 COMMISSION DECISION on the implementation of the Preparatory Action on the Enhancement of the European industrial potential in the field of security research
M281-1999 MANDATE TO CEN CONCERNING THE EXECUTION OF STANDARDIZATION WORK, WITHIN THE CONTEXT OF DIRECTIVE 89/686/CEE RELATING TO PERSONAL PROTECTIVE EQUIPMENT, FOR THE PURPOSE OF REVISING STANDARD EN 1384 RELATING TO HELMETS FOR EQUESTRIAN SPORTS
M 307-2000 MANDATE TO CEN CONCERNING THE EXECUTION OF STANDARDIZATION WORK, WITHIN THE CONTEXT OF DIRECTIVE 89/686/CEE RELATING TO PERSONAL PROTECTIVE EQUIPMENT, FOR THE PURPOSE OF REVISING STANDARD EN 795 "PROTECTION AGAINST FALLS FROM A HEIGHT - ANCHOR DEVICES - R
93/42/EEC-2009 Commission communication in the framework of the implementation of the Council Directive 93/42/EEC concerning medical devices (Text with EEA relevance; Publication of titles and references of harmonised standards under the directive)
2008/C 304/06-2008 Commission communication in the framework of the implementation of the Council Directive 93/42/EEC concerning medical devices
M 122-1998 MANDATE TO CEN/CENELEC CONCERNING THE EXECUTION OF STANDARDISATION WORK FOR HARMONIZED STANDARDS ON ROOF COVERINGS, ROOFLIGHTS, ROOF WINDOWS AND ANCILLARY PRODUCTS
M 404-2007 STANDARDISATION MANDATE TO CEN, CENELEC AND ETSI FOR HARMONISED STANDARDS ACCORDING TO THE ELECTRO MAGNETIC COMPATIBILITY (EMC) DIRECTIVE 2004/108/EC
2012/C 218/08-2012 Commission communication in the framework of the implementation of the Directive 2004/22/EC of the European Parliament and of the Council on measuring instruments (Text with EEA relevance; Publication of titles and references of harmonised standards under
NO 240/2006-2006 COMMISSION REGULATION (EC) amending Regulation (EC) No 622/2003 laying down measures for the implementation of the common basic standards on aviation security
2016/537-2016 DECISIONS COMMISSION IMPLEMENTING DECISION on the publication with a restriction in the Official Journal of the European Union of the reference of standard EN 50566:2013 on requirements to demonstrate compliance of radio frequency fields from handheld and

Professional Standard - Traffic, Implementation Standard 703

JT 410-1999 Resistance wind safety requirements for the port large size handling machines

Acoustical Society of America (ASA), Implementation Standard 703

ASA S12.60-2002 Acoustical Performance Criteria, Design Requirements, and Guidelines for Schools
ASA S12.5-2006 Acoustics Requirements for the Performance and Calibration of Reference Sound Sources Used for the Determination of Sound Power Levels ISO 6926:1999

U.S. Air-Conditioning, Heating, and Refrigeration Institute (US-AHRI), Implementation Standard 703

ARI 250-2001 Performance and Calibration of Reference Sound Sources

Professional Standard - Energy, Implementation Standard 703

NB/T 13003-2015 Standards of project implementation management for liquid biofuels

US-COE, Implementation Standard 703

COE ER 27-2-2-1996 PROCEDURES FOR IMPLEMENTATION AND ENFORCEMENT OF THE RULES OF PROFESSIONAL CONDUCT FOR ATTORNEYS

Society of Automotive Engineers (SAE), Implementation Standard 703

SAE J1817-2001 Long-Stroke Air-Brake Actuator Marking
SAE J1817-2012 Long-Stroke Air-Brake Actuator Marking
SAE J1817-2023 Long-Stroke Air-Brake Actuator Marking
SAE GEIASTD0010A-2018 Standard Best Practices for System Safety Program Development and Execution
SAE GEIASTD0010-2008 Standard Best Practices for System Safety Program Development and Execution
SAE RS-186-1-2015 RS186 Standard Airman

SAE - SAE International, Implementation Standard 703

SAE J1817-1998 Long-Stroke Air-Brake Actuator Marking
SAE J1817-2018 Long-Stroke Air-Brake Actuator Marking
SAE J1817-1991 Long Stroke Air Brake Actuator Marking@ Recommended Practice
SAE J1817-2016 Long-Stroke Air-Brake Actuator Marking

US-CFR-file, Implementation Standard 703

CFR 29-1952.314-2014 Labor. Part1952:Approved state plans for enforcement of state standards. Section1952.314:Level of Federal enforcement.
CFR 12-703.14-2013 Banks and banking. Part703:Investment and deposit activities. Section703.14:Permissible investments.
CFR 12-30.6-2014 Banks and Banking. Part30:Safety and soundness standards. Section30.6:Enforcement of orders.
CFR 10-20.2401-2014 Energy. Part20:Standards for protection against radiation. Subpart O:Enforcement. Section20.2401:Violations.
CFR 10-20.2402-2014 Energy. Part20:Standards for protection against radiation. Subpart O:Enforcement. Section20.2402:Criminal penalties.
CFR 12-703.14-2014 Banks and banking. Part703:Investment and deposit activities. SubpartA:General investment and deposit activities. Section703.14:Permissible investments.
CFR 12-703.111-2014 Banks and banking. Part703:Investment and deposit activities. SubpartB:Derivatives authority. Section703.111:NCUA approval.
CFR 29-1926.4-2014 Labor. Part1926:Safety and health regulations for construction. Section1926.4:Rules of practice for administrative adjudications for enforcement of safety and health standards.
CFR 14-16.227-2013 Aeronautics and Space. Part16:Rules of practice for federally-assisted airport enforcement proceedings. Section16.227:Standard of proof.
CFR 21-1.20-2013 Food and Drugs. Part1:General enforcement regulations. Section1.20:Presence of mandatory label information.

AASHTO - American Association of State Highway and Transportation Officials, Implementation Standard 703

PP 57-2006 Standard Practice for Establishing Requirements for and Performing Equipment Calibrations@ Standardizations@ and Checks
PS-1999 AASHTO Provisional Standards (Interim Edition)
PS-2009 AASHTO Provisional Standards
PS-2006 AASHTO Provisional Standards
PS-2008 AASHTO Provisional Standards
PS-2007 AASHTO Provisional Standards
PS-1996 AASHTO Provisional Standards (Third Edition)
PS-2002 AASHTO Provisional Standards (5th Edition)
PS-2003 AASHTO Provisional Standards (6th Edition)
PS-2013 AASHTO Provisional Standards (17th Edition)
PS-2005 AASHTO Provisional Standards (8th Edition)
PS-2010 AASHTO Provisional Standards (14th Edition)
PS-1998 AASHTO Provisional Standards (Fourth Edition)
PS-2004 AASHTO Provisional Standards (7th Edition)
PS-2012 AASHTO Provisional Standards (16th Edition)
PS-2011 AASHTO Provisional Standards (15th Edition)

The American Road & Transportation Builders Association, Implementation Standard 703

AASHTO PP 57-2006(R2009) Standard Practice for Establishing Requirements for and Performing Equipment Calibrations, Standardizations, and Checks
AASHTO PS-2003 AASHTO Provisional Standards 6th Edition
AASHTO PS-2010 AASHTO Provisional Standards 14th Edition
AASHTO PS-2012 AASHTO Provisional Standards 16th Edition
AASHTO PS-2013 AASHTO Provisional Standards 17th Edition
AASHTO PS-2014 AASHTO Provisional Standards (18th Edition)

PL-PKN, Implementation Standard 703

PN P55036-1972 Correction signs and execu?iono? correction

Beijing Provincial Standard of the People's Republic of China, Implementation Standard 703

DB11/Z 352-2008 Food safety for Beijing Olympic Games —Implementing standards and applying principles
DB11/Z 352-2006 Olympic Food Safety Implementation Standards and Applicable Principles
DB11/Z 445-2008 Food Safety for Beijing Olympic Games —Implementing Standard and Applying Principle for Packing，Storage & Transportation
DB11/Z 445-2007 Olympic Food Safety Packaging, Storage and Transportation Implementation Standards and Applicable Principles

Institute of Electrical and Electronics Engineers (IEEE), Implementation Standard 703

IEEE Std 382-2006 IEEE Standard for Qualification of Safety-Related Actuators for Nuclear Power Generating Stations
IEEE Std 382-1980 IEEE Standard for Qualification of Safety Related Valve Actuators
IEEE P2888.2/D02, September 2023 IEEE Draft Standard for Actuator Interface for Cyber and Physical Worlds
IEEE P2888.2/D1, July 2023 IEEE Draft Standard for Actuator Interface for Cyber and Physical Worlds
IEEE P2952 IEEE Approved Draft Standard for Secure Computing Based on Trusted Execution Environment
IEEE P2952/D4, June 2022 IEEE Approved Draft Standard for Secure Computing Based on Trusted Execution Environment
IEEE P1859/D8, February 2017 IEEE Approved Draft Standard for Relaxor-Based Single Crystals for Transducer and Actuator Applications
IEEE P1859/D7, September 2016 IEEE Approved Draft Standard for Relaxor-Based Single Crystals for Transducer and Actuator Applications
IEEE P382/D4, July 2019 IEEE Approved Draft Standard for Qualification of Safety-Related Actuators for Nuclear Power Generating Stations and Other Nuclear Facilities
IEEE 382-2019 IEEE Standard for Qualification of Safety-Related Actuators for Nuclear Power Generating Stations and Other Nuclear Facilities
IEEE Std 382-2019 IEEE Standard for Qualification of Safety-Related Actuators for Nuclear Power Generating Stations and Other Nuclear Facilities
IEEE P1451.2/D20, Feb 2011 IEEE Draft Standard for a Smart Transducer Interface for Sensors and Actuators - Serial Point-to-Point Interface
IEEE P1451.2/D20, February 2011 IEEE Draft Standard for a Smart Transducer Interface for Sensors and Actuators - Serial Point-to-Point Interface
IEEE P382/D3, January 2019 IEEE Draft Standard for Qualification of Safety-Related Actuators for Nuclear Power Generating Stations and Other Nuclear Facilities
IEEE Std 382-1996 IEEE Standard for qualification of actuators for power-operated valve assemblies with safety-related functions for nuclear power plants
IEEE 2830-2021 IEEE Standard for Technical Framework and Requirements of Trusted Execution Environment based Shared Machine Learning
ANSI C63.7-2015 American National Standard Guide for Construction of Test Sites for Performing Radiated Emission Measurements - Redline
IEEE Std 2830-2021 IEEE Standard for Technical Framework and Requirements of Trusted Execution Environment based Shared Machine Learning
IEEE P2830/D3, May 2021 IEEE Draft Standard for Technical Framework and Requirements of Trusted Execution Environment based Shared Machine Learning
IEEE P2830/D1, October 2020 IEEE Draft Standard for Technical Framework and Requirements of Trusted Execution Environment based Shared Machine Learning
ANSI/IEEE Std 500-1984 IEEE Standard Reliability Data for Pumps and Drivers, Valve Actuators, and Valves (Excerpted from ANSI/IEEE Std 500-1984)
IEEE 500PV-1984 IEEE Standard Reliability Data for Pumps and Drivers, Valve Actuators, and Valves (Excerpted from ANSI/IEEE Std 500-1984)
IEEE/ANSI C63.7-1988 American National Standard guide for construction of open area test sites for performing radiated emission measurements
ANSI Std C63.7-1988 American National Standard guide for construction of open area test sites for performing radiated emission measurements
IEEE Std C63.10-2009 American National Standard for Testing Unlicensed Wireless Devices
IEEE 2003/COR-1999 Information technology - Requirements and guidelines for test methods specifications and test method implementations for measuring conformance to POSIXę standards; Correction
IEEE Approved Std P1451.5/D10.8, Dec 2006 IEEE Approved Draft Standard for a Smart Transducer Interface for Sensors and Actuator -- Wireless Communication Protocols and Transducer Electronic Data Sheet (TEDS) Formats
IEEE Std C63.10-2013 American National Standard of Procedures for Compliance Testing of Unlicensed Wireless Devices
IEEE Std P382_D05 Unapproved IEEE Draft Standard for Qualification for Actuators for Power Operated Valve Assemblies With Safety-Related Functions for Nuclear Power Plants (Revision of IEEE 382-1996)
IEEE Std P382_D04 Unapproved IEEE Draft Standard for Qualification for Actuators for Power Operated Valve Assemblies With Safety-Related Functions for Nuclear Power Plants (Revision of IEEE 382-1996)
IEEE Std 1451.1-1999 IEEE Standard for a Smart Transducer Interface for Sensors and Actuators - Network Capable Application Processor Information Model
IEEE Approved Std P1451.0/D8.00, Jan 2007 Approved IEEE Draft Standard for a Smart Transducer Interface for Sensors and Actuators Common Functions, Communication Protocols, and Transducer Electronic Data Sheet (TEDS) Formats
IEEE Std P1451.0/D7.0, Oct 2006 Unapproved IEEE Draft Standard for a Smart Transducer Interface for Sensors and Actuators - Common Functions, Communication Protocols, and Transducer Electronic Data Sheet (TEDS) Formats
IEEE P1730.1/D3.1, August 2012 IEEE Approved Draft Recommended Practice for Distributed Simulation Engineering and Execution Process (DSEEP) Multi-Architecture Overlay (DMAO)
IEEE Std 1451.5-2007 IEEE Standard for a Smart Transducer Interface for Sensors and Actuator -- Wireless Communication Protocols and Transducer Electronic Data Sheet (TEDS) Formats

ES-UNE, Implementation Standard 703

IEEE 2952-2023 IEEE Standard for Secure Computing Based on Trusted Execution Environment
UNE-EN 60447:2004 Basic and safety principles for man-machine interface, marking and identification - Actuating principles (Endorsed by AENOR in July of 2004.)

RU-GOST R, Implementation Standard 703

GOST R 1.6-2005 Standardization in the Russian Federation. Draft standards. Organization of realization of expertise
GOST R 1.6-2013 Standardization in the Russian Federation. Draft standards. Rules of organization and realization of expertise
GOST 26.008-1985 Lettering for inscriptions applied by engraving method. Executive dimensions
GOST 21.114-2013 System of design documents for construction. Rules for execution of sketch drawings of general views of non-standard products
GOST R 52754-2007 Special purpose vehicles for use by the Federal Penitentiary Service and the Federal Bailiffs Service. Vehicles color graphic schemes. Identification markings and signs. General requirements

交通运输部, Implementation Standard 703

JT/T 410-2022 Transportation administrative law enforcement signs

British Standards Institution (BSI), Implementation Standard 703

BS 11000-2:2011 Collaborative business relationships. Guide to implementing BS 11000-1
BS PD CEN/TR 14709:2006 Postal services — Quality of service — Guide for the implementation of EN 13850
BS CWA 15535-2:2006 Multi-application multi-issuer citizen scheme standardisation - Scheme architecture and implementation solution
BS 11000-2:2017 Collaborative business relationship management systems. Guide to implementing BS ISO 44001
BS EN 12391-1:2003 Chimneys--Execution standard for metal chimneys--Part 1:Chimneys for non-roomsealed heating appliances
BS ISO 30004:2012 Ships and marine technology. Ship recycling management systems. Guidelines for the implementation of ISO 30000
BIP 0008-2-2008 Evidential Weight and Legal Admissibility of Information Transferred Electronically - Code of Practice for the Implementation of BS 10008
BIP 0008-2-2014 Evidential Weight and Legal Admissibility of Information Transferred Electronically: Code of Practice for the Implementation of BS 10008
BS ISO 28004-4:2014 Security management systems for the supply chain. Guidelines for the implementation of ISO 28000. Additional specific guidance on implementing ISO 28000 if compliance with ISO 28001 is a management objective
BS ISO/IEC 18013-5:2021 Personal identification. ISO-compliant driving licence. Mobile driving licence (mDL) application
BS PD CEN/TR 15449:2006 Geographic information — Standards, specifications, technical reports and guidelines, required to implement Spatial Data Infrastructure
PAS 124-2008 Defining, implementing and managing website standards ICS codes: 35.080; 35.240.30 NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW A statement of best practice
BS 7567-3:1992 Electronic transfer of geographic information (NTF) - Specification for implementing NTF using BS 6690
BS ISO/IEC 13210:2000 Information technology - Requirements and guidelines for test methods specifications and test method implementation for measuring conformance to POSIX standards
BS ISO/IEC 18013-4:2019 Personal identification. ISO-compliant driving licence. Test methods
20/30325472 DC BS ISO/IEC 18013-5. Personal identification. ISO-compliant driving licence. Part 5. Mobile driving licence (mDL) application

Canadian Standards Association (CSA), Implementation Standard 703

CSA PLUS 9001-2009 The ISO 9000 Essentials A practical handbook for implementing the ISO 9000 family of standards (Fourth Edition)

Professional Standard - Electricity, Implementation Standard 703

DL/T 2037-2019 Application Principles for Environmental Noise Implementation Standards at Substation Boundary

AT-ON, Implementation Standard 703

ONORM B 3345-1999 Renovation mortars - Requirements, test methods, execution guidelines - Marking of conformity
ONORM M 5960-1967
ONORM B 4416-1978 Geotechnical engineering (Foundation Engineering); analysis of soil specimen; principles for performing and evaluating of shear tests
ONORM B 4420-1989 Geotechnical engineering (foundation engineering); analysis of soil specimens; principles for performing and evaluating of confined compression tests

Underwriters Laboratories (UL), Implementation Standard 703

UL 756 BULLETIN-2004 UL Standard for Safety Coin and Currency Changers and Actuators
UL 756-2010 UL Standard for Safety Coin and Currency Changers and Actuators (Sixth Edition)
UL 756-1993 UL Standard for Safety Coin and Currency Changers and Actuators (Fourth Edition)
UL 756-2016 UL Standard for Safety Coin and Currency Changers and Actuators (Eighth Edition)
UL 756 BULLETIN-2016 UL Standard for Safety Coin and Currency Changers and Actuators (COMMENTS DUE: March 4@ 2016)
UL 756 BULLETIN-2009 UL Standard for Safety Coin and Currency Changers and Actuators (COMMENTS DUE: December 28@ 2009)
UL 756 BULLETIN-2018 UL Standard for Safety Coin and Currency Changers and Actuators (COMMENTS DUE: June 8@ 2018)
UL 756 BULLETIN-2014 UL Standard for Safety Coin and Currency Changers and Actuators (COMMENTS DUE: September 15@ 2014)
UL 756 BULLETIN-2012 UL Standard for Safety Coin and Currency Changers and Actuators (COMMENTS DUE: July 11@ 2012)
UL 756-2012 UL Standard for Safety Coin and Currency Changers and Actuators (Seventh Edition; Reprint with revisions through and including December 5@ 2014)
UL 8730-2-14-1998 UL Standard for Safety Automatic Electrical Controls for Household and Similar Use; Part 2: Particular Requirements for Electric Actuators (First Edition)
UL 60691 CRD-2008 UL Standard for Safety Thermal-Links – Requirements and Application Guide - Section / Paragraph Reference: Section 7 Subject: Method to perform the Marking test (Edition 3: September 26@ 2003)

US-HUD, Implementation Standard 703

HUD 24 CFR PT 41-2009 POLICIES AND PROCEDURES FOR THE ENFORCEMENT OF STANDARDS AND REQUIREMENTS FOR ACCESSIBILITY BY THE PHYSICALLY HANDICAPPED

Military Standards (MIL-STD), Implementation Standard 703

DOD MIL-STD-2301 A ADMIN NOTICE 1-2004 COMPUTER GRAPHICS METAFILE (CGM) IMPLEMENTATION STANDARD FOR THE NATIONAL IMAGERY TRANSMISSION FORMAT STANDARD
DOD MIL-STD-2301 A-1998 COMPUTER GRAPHICS METAFILE (CGM) IMPLEMENTATION STANDARD FOR THE NATIONAL IMAGERY TRANSMISSION FORMAT STANDARD

IX-UIC, Implementation Standard 703

UIC O 407-1-2009 Standardised data exchange for the execution of train operations, including international punctuality analysis
UIC 510-1-1978 Standardization of truck travel parts

Korean Agency for Technology and Standards (KATS), Implementation Standard 703

KS C IEC 61310-3:2019 Safety of machinery — Indication, marking and actuation — Part 3: Requirements for the location and operation of actuators
KS C IEC 60447:2016 Basic and safety principles for man-machine interface, marking and identification ― Actuating principles
KS C 5393-42-2001 Potentiometers for use in electronic equipment-Part 4:Blank detail specification:Single-turn rotary power potentiometers Assessment level F
KS C 5393-41-2001 Potentiometers for use in electronic equipment-Part 4:Blank detail specification:Single-turn rotary power potentiometers Assessment level E
KS A 0113-2013 Technical drawings－Dimensioning－General principles, definitions, methods of execution and special indications
KS C IEC 60073-2009(2020) Basic and safety principles for man-machine interface, marking and identification－Coding principles for indicators and actuators
KS L 0002-1990(2010) Terms Related to Lime
KS R 8010-1991 Assembling of Bicycles
KS R 8010-1991(2011) Assembling of Bicycles
KS L 0001-1990(2010) Terms related to gypsum
KS R 8010-1981 Assembling of Bicycles

KR-KS, Implementation Standard 703

KS C IEC 61310-3-2019 Safety of machinery — Indication, marking and actuation — Part 3: Requirements for the location and operation of actuators

Government Electronic & Information Technology Association, Implementation Standard 703

GEIA-STD-0010-2008 Standard Best Practices for System Safety Program Development and Execution (Formerly TechAmerica GEIA-STD-0010)

Manufacturers Standardization Society of the Valve and Fitting Industry (MSS), Implementation Standard 703

MSS SP-86-2014 Guidelines for Metric Data in Standards for Valves, Flanges, Fittings, and Actuators
MSS SP-86-2002 Guidelines for Metric Data in Standards for Valves, Flanges, Fittings and Actuators

MSS - Manufacturers Standardization Society of the Valve and Fittings Industry., Implementation Standard 703

SP-86-1987 Guidelines for Metric Data in Standards for Valves@ Flanges@ Fittings and Actuators
SP-86-1997 Guidelines for Metric Data in Standards for Valves@ Flanges@ Fittings and Actuators
SP-86-2002 Guidelines for Metric Data in Standards for Valves@ Flanges@ Fittings and Actuators
SP-86-2014 Guidelines for Metric Data in Standards for Valves@ Flanges@ Fittings@ and Actuators
SP-86-2009 Guidelines for Metric Data in Standards for Valves@ Flanges@ Fittings@ and Actuators (Includes Errata: July 6@ 2011)

Professional Standard - Agriculture, Implementation Standard 703

DBJ440100/T 27-2009 Executive Standards and Applicable Principles of Food Safety Packaging, Storage and Transportation for the Asian Games
703兽药质量标准2017年版 Chemicals Volume II Veterinary Drug Product Instructions Template XIV Draw Phosphorus Solution (for Silkworms) Instructions

PT-IPQ, Implementation Standard 703

NP 4410-2002 Occupational health and safety manegement systems - Guidelines for the implementation of NP 4397
NP 4406-2003 Sustainable Forest Management Systems Application of the pan-european criteria for sustainable forest management

IEEE - The Institute of Electrical and Electronics Engineers@ Inc., Implementation Standard 703

IEEE 500 P&V-1984 Standard Reliability Data for Pumps and Drivers@ Valve Actuators@ and Valves
IEEE P382/D3-2019 Draft Standard for Qualification of Safety-Related Actuators for Nuclear Power Generating Stations and Other Nuclear Facilities
IEEE 1451.5-2007 Standard for a Smart Transducer Interface for Sensors and Actuators - Wireless Communication Protocols and Transducer Electronic Data Sheet (TEDS) Formats
IEEE 1451.1-1999 Standard for a Smart Transducer Interface for Sensors and Actuators-Network Capable Application Processor (NCAP) Information Model

US-FCR, Implementation Standard 703

FCR 47 CFR PART 202-2014 NATIONAL SECURITY AND EMERGENCY PREPAREDNESS PLANNING AND EXECUTION
FCR 47 CFR PART 202-2013 NATIONAL SECURITY AND EMERGENCY PREPAREDNESS PLANNING AND EXECUTION
FCR 47 CFR PART 201-2012 NATIONAL SECURITY AND EMERGENCY PREPAREDNESS PLANNING AND EXECUTION
FCR 47 CFR PART 202-2012 NATIONAL SECURITY AND EMERGENCY PREPAREDNESS PLANNING AND EXECUTION
FCR FED OSHA 3096-2002 ASBESTOS STANDARD FOR THE CONSTRUCTION INDUSTRY
FCR 21 CFR PART 19-2015 STANDARDS OF CONDUCT AND CONFLICTS OF INTEREST
FCR 21 CFR PART 19-2014 STANDARDS OF CONDUCT AND CONFLICTS OF INTEREST

HU-MSZT, Implementation Standard 703

International Electrotechnical Commission (IEC), Implementation Standard 703

IEC PAS 62084:1998 Implementation of Flip Chip and Chip Scale technology
IECQ 04-5-2010 IEC quality assessment system for electronic components (IECQ scheme) - Standard training - Part 5: Standard operational procedures for conducting IECQ HSPM training

European Committee for Standardization (CEN), Implementation Standard 703

EN ISO 14004:2016 Environmental management systems - General guidelines on implementation (ISO 14004:2016)
EN ISO/TR 3834-6:2007 Quality requirements for fusion welding of metallic materials - Part 6: Guidelines on implementing ISO 3834
DD ENV 1090-5-1998 Execution of Steel Structures - Part 5: Supplementary Rules for Bridges Ratified European Text

Professional Standard - Ocean, Implementation Standard 703

HY/T 137-2011 Standard system for law enforcement of China Marine Surveillance
HY/T 019-1992 Table of the standard system for marine industry

Association Francaise de Normalisation, Implementation Standard 703

FD X50-797:2008 Availability of medical devices at home - Implementation of the service commitments for standard NF X50-796
NF DTU 13.3 P1-2:2021 Travaux de dallages - Conception, calcul et exécution - Partie 1-2 : critères généraux de choix des matériaux
NF DTU 13.2 P1-1:2020 Travaux de bâtiment - Fondations Profondes - Partie 1-1 : éléments relatifs à l'exécution - Cahier des clauses techniques types
NF DTU 57.1 P1-1:2020 Travaux de bâtiment - Planchers surélevés (à libre accès) - Éléments constitutifs - Exécution - Partie 1-1 : cahier des clauses techniques types
NF DTU 57.1 P2:2020 Travaux de bâtiment - Planchers surélevés (à libre accès) - Éléments constitutifs - Exécution - Partie 2 : cahier des clauses administratives spéciales types
NF DTU 57.1 P1-2:2020 Travaux de bâtiment - Planchers surélevés (à libre accès) - Éléments constitutifs - Exécution - Partie 1-2 : critères généraux de choix des matériaux
NF DTU 13.3 P1-1-2:2021 Travaux de dallages - Conception, calcul et exécution - Partie 1-1-2 : cahier des Clauses techniques types des dallages de maisons individuelles
NF C46-645:1993 FIP bus for exchange of informations between transmitters,actuators and programmable controllers Guide for the redaction of companion standards.
NF DTU 13.3 P1-1-1:2021 Travaux de dallages - Conception, calcul et exécution - Partie 1-1-1 : cahier des clauses techniques types pour les dallages réalisés pour tous types d'ouvrages (hors maisons individuelles)

German Institute for Standardization, Implementation Standard 703

DIN 820-15:2017 Standardization - Part 15: Implementation of ISO and IEC international documents - Presentation of documents
DIN 820-15:2010 Standardization - Part 15: Implementation of ISO and IEC international documents - Presentation of documents
DIN 4108-7:2011 Thermal insulation and energy economy in buildings - Part 7: Air tightness of buildings - Requirements, recommendations and examples for planning and performance
DIN 4108-7:2001 Thermal insulation and energy economy of buildings - Part 7: Airtightness of building, requirements, recommendations and examples for planning and performance
DIN 38402-62:2014-12 German standard methods for the examination of water, waste water and sludge - General information (group A) - Part 62: Plausibility check of analytical data by performing an ion balance (A 62)

Standard Association of Australia （SAA）, Implementation Standard 703

European Association of Aerospace Industries, Implementation Standard 703

AECMA PREN 3475-703-1992 Aerospace Series Cables, Electrical, Aircraft Use Test Methods Part 703 - Permanence of Manufacturer's Marking Issue P 1

Jiangsu Provincial Food Standard of the People's Republic of China, Implementation Standard 703

DBS32/ 001-2013 Food Safety Local Standards Asian Youth Games and Youth Olympic Games Catering Service Food Safety Implementation Standards and Applicable Principles

European Telecommunications Standards Institute (ETSI), Implementation Standard 703

ETSI SR 001 478-3-1999 Report on the Implications of the R&TTE Directive; Part 3: Existing EMC Product Standards
ETSI SR 001 478-2-1999 Report on the Implications of the R&TTE Directive; Part 2: Existing Radio (Not EMC) Product Standards
ETSI TR 102 282-2004 Standardization Work Programme in support of digital interactive television and the effective implementation of article 18 of Directive 2002/21/EC (V1.1.1)

Taiwan Provincial Standard of the People's Republic of China, Implementation Standard 703

CNS 14725-2003 General criteria for the operation of various types of bodies performing inspection
CNS 3021-1969 Crude Camphor (Tentative)
CNS 10781-1984 Lighting for Pedestrian Crossing
CNS 2598-1972 Charcoal

RO-ASRO, Implementation Standard 703

STAS R 6479/9-1986 REFRACTARY PRODUCGTS Code of practice for ovens of household ceramie industry

Professional Standard - Nuclear Industry, Implementation Standard 703

EJ/T 880-1994 Guidelines for Emergency Planning and Execution Procedures of Nuclear Power Plant Operating Organizations

CZ-CSN, Implementation Standard 703

CSN 73 2400 Zb-1989

SE-SIS, Implementation Standard 703

SIS SS-ISO 129:1986 Technical drawings - Dimensioning - General principles, definitions, methods of execution and special indications
SIS SMS 1305-1950

Association of German Mechanical Engineers, Implementation Standard 703

VDI/VDE 3845 Blatt 2-2011 Industrial process control valves - Pneumatic part-turn actuators - Marking
DVS 2902-4-1978 Resistance spot welding of steels of an individual thickness of up to 3 mm; preparation and execution

VE-FONDONORMA, Implementation Standard 703

COVENIN 566-1975

CEN - European Committee for Standardization, Implementation Standard 703

EN 12391-1:2003 Chimneys - Execution standard for metal chimneys - Part 1: Chimneys for non-roomsealed heating appliances

IETF - Internet Engineering Task Force, Implementation Standard 703

RFC 7700-2015 Preparation@ Enforcement@ and Comparison of Internationalized Strings Representing Nicknames
RFC 8266-2017 Preparation@ Enforcement@ and Comparison of Internationalized Strings Representing Nicknames
RFC 6424-2011 Mechanism for Performing Label Switched Path Ping (LSP Ping) over MPLS Tunnels
RFC 8264-2017 PRECIS Framework: Preparation@ Enforcement@ and Comparison of Internationalized Strings in Application Protocols
RFC 7564-2015 PRECIS Framework: Preparation@ Enforcement@ and Comparison of Internationalized Strings in Application Protocols
RFC 8265-2017 Preparation@ Enforcement@ and Comparison of Internationalized Strings Representing Usernames and Passwords
RFC 7613-2015 Preparation@ Enforcement@ and Comparison of Internationalized Strings Representing Usernames and Passwords

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Implementation Standard 703

GB/T 17680.4-1999 Criteria for emergency planning and preparedness for nuclear power plants. The off-site emergency planning and implementing procedures
GB/T 17680.8-2003 Criteria for emergency planning and preparedness of nuclear power plants the on-site emergency planning and implementing procedures

Defense Logistics Agency, Implementation Standard 703

DLA DSCC-DWG-09003-2008 SWITCHES, DUAL IN-LINE PACKAGE (DIP), ROCKER ACTUATOR, STANDARD PROFILE, SINGLE POLE, SINGLE THROW STATIONS, SEALED BASE

未注明发布机构, Implementation Standard 703

BS EN ISO 6553:2017(2018) Industrial valves, steam traps, actuators and safety devices against excessive pressure - Valves - Basic standards
DIN EN 13084-4:2003 Free-standing chimneys Part 4: Internal pipes made of masonry – design, dimensioning and execution
BS EN 61310-3:2008(2009) Safety of machinery — Indication, marking and actuation — Part 3 : Requirements for the location and operation of actuators

Aeronautical Radio Inc., Implementation Standard 703

ARINC 631-5-2008 VHF DIGITAL LINK (VDL) MODE 2 IMPLEMENTATION PROVISIONS 1991; Includes Supplements 1-5
ARINC 631-4-2005 VHF DIGITAL LINK (VDL) MODE 2 IMPLEMENTATION PROVISIONS 1991; Includes supplements 1-4

US-DOL, Implementation Standard 703

DOL 29 CFR PT 6-2008 RULES OF PRACTICE FOR ADMINISTRATIVE PROCEEDINGS ENFORCING LABOR STANDARDS IN FEDERAL AND FEDERALLY ASSISTED CONSTRUCTION CONTRACTS AND FEDERAL SERVICE CONTRACTS
DOL 29 CFR PART 6-2009 RULES OF PRACTICE FOR ADMINISTRATIVE PROCEEDINGS ENFORCING LABOR STANDARDS IN FEDERAL AND FEDERALLY ASSISTED CONSTRUCTION CONTRACTS AND FEDERAL SERVICE CONTRACTS

Guangdong Provincial Standard of the People's Republic of China, Implementation Standard 703

DB44/T 1986-2017 Basic norms for the standardization of safety production law enforcement and supervision

International Telecommunication Union (ITU), Implementation Standard 703

ITU-R BT.1125-1994 Basic Objectives for the Planning and Implementaion of Digital Terrestrial Television Broadcasting System

FI-SFS, Implementation Standard 703

SFS-ISO 129:1986 In case of interpretation disputes the English text applies
SFS 4450-1979
SFS 5200-1985
SFS 4435-1985

CH-SNV, Implementation Standard 703

VSM 10336.9-1939

Danish Standards Foundation, Implementation Standard 703

DS/EN 60447:2005 Basic and safety principles for man-machine interface, marking and identification - Actuating principles
DS/ISO/IEC 18013-5:2021 Personal identification – ISO-compliant driving licence – Part 5: Mobile driving licence (mDL) application

EU/EC - European Union/Commission Legislative Documents, Implementation Standard 703

2016/C 416/02-2016 Commission communication in the framework of the implementation of the Commission Directive 96/60/EC implementing Council Directive 92/75/ECC with regard to energy labelling of household combined washer-driers (Text with EEA relevance; Publication of titl
2001/C 202/06-2001 Commission communication in the framework of the implementation of Council Directive 89/106/EEC (Text with EEA relevance; Publication of titles and references of harmonised standards under the Directive)
2016/586-2016 DECISIONS COMMISSION IMPLEMENTING DECISION on technical standards for the refill mechanism of electronic cigarettes (Text with EEA relevance; notified under document C(2016) 2093)

TH-TISI, Implementation Standard 703

TIS 844-1989 Standard for bicycles
TIS 646-1986 Standard for bicycle saddles
TIS 254-1983 Standard for bicycle frames
TIS 631-1986 Standard for bicycle pedals
TIS 628-1986 Standard for bicycle chaincases
TIS 678-1987 Standard for bicycle bells
TIS 627-1986 Standard for bicycle stands
TIS 680-1987 Standard for bicycle brakes
TIS 626-1986 Standard for bicycle carriers
TIS 630-1986 Standard for bicycle freewheels
TIS 679-1987 Standard for bicycle hubs
TIS 351-1980 Standard for bicycle chains
TIS 317-1979 Standard for bicycle handles
TIS 352-1980 Standard for bicycle front forks
TIS 267-1978 Standard for bicycle rims
TIS 311-1979 Standard for bicycle spokes
TIS 419-1982 Standard for bicycle threads
TIS 571-1985 Standard for bicycle tyres
TIS 629-1986 Standard for bicycle bottom.bracket axles
TIS 342-1980 Standard for bicycle mudguards
TIS 310-1979 Standard for steel tubes for bicycle purposes
TIS 675-1987 Standard for bicycle bottom bracket shells
TIS 676-1987 Standard for bicycle bottom bracket shell cups
TIS 652-1986 Standard for bicycle rubber inner tubes
TIS 817-1988 Standard for bicycle lighting sets

AENOR, Implementation Standard 703

UNE 1039:1994 TECHNICAL DRAWINGS. DIMENSIONING. GENERAL PRINCIPLES, DEFINITIONS, METHODS OF EXECUTION AND SPECIAL INDICATIONS.

A4A - Airlines for America, Implementation Standard 703

SPEC 2300-2017 Data Exchange Standard For Flight Operations
SPEC 2300-2014 Spec 2300: Data Exchange Standard for Flight Operations
SPEC 2300-2011 Spec 2300: Data Exchange Standard for Flight Operations

Lithuanian Standards Office , Implementation Standard 703

LST EN 60447-2004 Basic and safety principles for man-machine interface, marking and identification. Actuating principles (IEC 60447:2004)

American Society of Quality Control （ASQC), Implementation Standard 703

ASQ Q9000-2-1997 Quality Management and Quality Assurance Standards - Part 2: Guidelines for Implementing ANSI/ISO/ASQC Q9001, ANSI/ISO/ASQC Q9002 and ANSI/ISO/ASQC Q9003 T223

National Fire Protection Association (NFPA), Implementation Standard 703

NFPA 1730-2016 Standard on Organization and Deployment of Fire Prevention Inspection and Code Enforcement, Plan Review, Investigation, and Public Education Operations to the Public (Effective Date: 6/15/2015)

CU-NC, Implementation Standard 703

NC 90-00-04-2-1987 Metrological Assurance. Reference Standard Samples (RSS). Implementation Order of Interlaboratory Arialysis of RSS from the Composition
NC 19-25-1988 Occupational Hygiene and Safety Standards System. Hot Water and Steam Boilers. Technical Passport

Hubei Provincial Standard of the People's Republic of China, Implementation Standard 703

DB42/T 1659-2021 Comprehensive law enforcement emergency official vehicle platform guarantee service evaluation standard

Professional Standard - Environmental Protection, Implementation Standard 703

HJ/T 273-2006 Standard for sector-specific eco-industrial parks (on trial)

VN-TCVN, Implementation Standard 703

TCVN 7440-2005 Emission standards for thermal power industry

Tianjin Provincial Standard of the People's Republic of China, Implementation Standard 703

DB12/T 656-2016 Opening Standards for Laundry and Dyeing Industry

Professional Standard - Hygiene , Implementation Standard 703

WS 285-2008 Diagnostic criteria for innuenza

Professional Standard - Earthquake, Implementation Standard 703

DB/T 1-2000 Table of Standard System for Seismic Industry
DB/T 1-2008 Diagram of standard system for earthquake

Xinjiang Provincial Standard of the People's Republic of China, Implementation Standard 703

DB65/T 2893-2008 The Quality Standard of Safety of the Travel Service

US-HHS, Implementation Standard 703

HHS 21 CFR PART 19 CFR PART 54-2011 STANDARDS OF CONDUCT AND CONFLICTS OF INTEREST

Hebei Provincial Standard of the People's Republic of China, Implementation Standard 703

DB13/T 1171-2010 Standardized Administrative Regulations

CN-QIYE, Implementation Standard 703

Q/JD 215001-2018 Operate standardized management practices

Professional Standard - Press and Publication, Implementation Standard 703

CY/Z 13-2019 Publication distribution standard system

Heilongjiang Provincial Standard of the People's Republic of China, Implementation Standard 703

DB23/T 1478-2012 Administrative Service Standard System Service Quality Standard System
DB23/T 1479-2012 Administrative Service Standard System Service Management Standard System
DB23/T 1480-2012 Administrative Service Standard System Service Work Standard System