ZH
RU
ES
Tensile test laboratory
Tensile test laboratory, Total:498 items.
In the international standard classification, Tensile test laboratory involves: Wood, sawlogs and sawn timber, Earthworks. Excavations. Foundation construction. Underground works, Construction materials, Water quality, Pipeline components and pipelines, Electricity. Magnetism. Electrical and magnetic measurements, Quality, Surface treatment and coating, Testing of metals, Elements of buildings, Test conditions and procedures in general, Lubricants, industrial oils and related products, Equipment for petroleum and natural gas industries, Analytical chemistry, Soil quality. Pedology, Medical sciences and health care facilities in general, Materials for aerospace construction, Tyres, Electrical wires and cables, Ventilators. Fans. Air-conditioners, Metrology and measurement in general, Mechanical testing, Diagnostic, maintenance and test equipment, Agricultural machines, implements and equipment, Products of the textile industry, Road engineering, Lighting, Protection against fire, Equipment for the chemical industry, Civil engineering in general, Corrosion of metals, Fibre optic communications, Electrical and electronic testing, Road vehicles in general, Products of the chemical industry, Laboratory medicine, Road vehicle systems, Glass, Veterinary medicine, Edible oils and fats. Oilseeds, Equipment for children, Equipment for entertainment, Ground service and maintenance equipment, Geology. Meteorology. Hydrology, Measurement of force, weight and pressure, Pharmaceutics, Education, Coals, Iron and steel products, Integrated circuits. Microelectronics, Acoustics and acoustic measurements, Environmental testing, Paints and varnishes, Non-metalliferous minerals, Pulps, Fertilizers, Standardization. General rules, Waxes, bituminous materials and other petroleum products, Installations in buildings.
Indonesia Standards, Tensile test laboratory
American Society for Testing and Materials (ASTM), Tensile test laboratory
- ASTM D7401-08 Standard Test Methods for Laboratory Determination of Rock Anchor Capacities by Pull and Drop Tests
- ASTM F2634-10 Standard Test Method for Laboratory Testing of Polyethylene (PE) Butt Fusion Joints using Tensile-Impact Method
- ASTM F2634-07 Standard Test Method for Laboratory Testing of Polyethylene (PE) Butt Fusion Joints using Tensile-Impact Method
- ASTM D5179-16(2021) Standard Test Method for Measuring Adhesion of Organic Coatings in the Laboratory by Direct Tensile Method
- ASTM D1883-05 Standard Test Method for CBR (California Bearing Ratio) of Laboratory-Compacted Soils
- ASTM D1883-99 Standard Test Method for CBR (California Bearing Ratio) of Laboratory-Compacted Soils
- ASTM D1883-07e1 Standard Test Method for CBR (California Bearing Ratio) of Laboratory-Compacted Soils
- ASTM ANS/ISO 17025-99 General requirements for the competence of testing and calibration laboratories
- ASTM ANS/ISO 17025-05 General Requirements for the Competence of Testing and Calibration Laboratories
- ASTM ANS/ISO17025-05 General Requirements for the Competence of Testing and Calibration Laboratories
- ASTM ANS/ISO17025-99 General requirements for the competence of testing and calibration laboratories
- ASTM E1733-95(2002) Standard Guide for Use of Lighting in Laboratory Testing
- ASTM E1733-95 Standard Guide for Use of Lighting in Laboratory Testing
- ASTM E1733-95(2002)e1 Standard Guide for Use of Lighting in Laboratory Testing
- ASTM D1883-14 Standard Test Method for California Bearing Ratio (CBR) of Laboratory-Compacted Soils
- ASTM D1883-07e2 Standard Test Method for CBR (California Bearing Ratio) of Laboratory-Compacted Soils
- ASTM C1222-99 Standard Practice for Evaluation of Laboratories Testing Hydraulic Cement
- ASTM C1222-21 Standard Practice for Evaluation of Laboratories Testing Hydraulic Cement
- ASTM G31-72(2004) Standard Practice for Laboratory Immersion Corrosion Testing of Metals
- ASTM E1733-95(2008) Standard Guide for Use of Lighting in Laboratory Testing
- ASTM F2634-15(2021) Standard Test Method for Laboratory Testing of Polyethylene (PE) Butt Fusion Joints using Tensile-Impact Method
- ASTM G31-72(1999) Standard Practice for Laboratory Immersion Corrosion Testing of Metals
- ASTM G31-12a Standard Practice for Laboratory Immersion Corrosion Testing of Metals
- ASTM D3345-17 Standard Test Method for Laboratory Evaluation of Solid Wood for Resistance to Termites
- ASTM D4648/D4648M-10 Standard Test Method for Laboratory Miniature Vane Shear Test for SaturatedFine-Grained Clayey Soil
- ASTM D4648/D4648M-13 Standard Test Method for Laboratory Miniature Vane Shear Test for SaturatedFine-Grained Clayey Soil
- ASTM D4435-04 Standard Test Method for Rock Bolt Anchor Pull Test
- ASTM D4435-84(1998) Standard Test Method for Rock Bolt Anchor Pull Test
- ASTM D4435-08 Standard Test Method for Rock Bolt Anchor Pull Test
- ASTM D4435-13 Standard Test Method for Rock Bolt Anchor Pull Test
- ASTM D4435-13e1 Standard Test Method for Rock Bolt Anchor Pull Test
- ASTM D5179-16 Standard Test Method for Measuring Adhesion of Organic Coatings in the Laboratory by Direct Tensile Method
- ASTM F2634-15 Standard Test Method for Laboratory Testing of Polyethylene (PE) Butt Fusion Joints using Tensile-Impact Method
- ASTM D8282-19 Standard Practice for Laboratory Test Method Validation and Method Development
- ASTM C1021-01 Standard Practice for Laboratories Engaged in the Testing of Building Sealants
- ASTM C1021-97 Standard Practice for Laboratories Engaged in the Testing of Building Sealants
- ASTM C1222-05 Standard Practice for Evaluation of Laboratories Testing Hydraulic Cement
- ASTM C1222-05a Standard Practice for Evaluation of Laboratories Testing Hydraulic Cement
- ASTM C1021-08 Standard Practice for Laboratories Engaged in Testing of Building Sealants
- ASTM E1733-22 Standard Guide for Use of Lighting in Laboratory Testing
- ASTM E1733-95(2014) Standard Guide for Use of Lighting in Laboratory Testing
- ASTM C1077-06 Standard Practice for Laboratories Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Laboratory Evaluation
- ASTM C1077-10 Standard Practice for Laboratories Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Laboratory Evaluation
- ASTM C1077-10a Standard Practice for Laboratories Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Laboratory Evaluation
- ASTM C1077-06a Standard Practice for Laboratories Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Laboratory Evaluation
- ASTM C1077-05b Standard Practice for Laboratories Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Laboratory Evaluation
- ASTM C1077-05a Standard Practice for Laboratories Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Laboratory Evaluation
- ASTM C1077-10c Standard Practice for Laboratories Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Laboratory Evaluation
- ASTM D5607-02(2006) Standard Test Method for Performing Laboratory Direct Shear Strength Tests of Rock Specimens Under Constant Normal Force
- ASTM D5607-16 Standard Test Method for Performing Laboratory Direct Shear Strength Tests of Rock Specimens Under Constant Normal Force
- ASTM D2168-02 Standard Test Methods for Calibration of Laboratory Mechanical-Rammer Soil Compactors
- ASTM D2168-02a Standard Test Methods for Calibration of Laboratory Mechanical-Rammer Soil Compactors
- ASTM D4964-96(2012) Standard Test Method for Tension and Elongation of Elastic Fabrics (Constant-Rate-of-Extension Type Tensile Testing Machine)
- ASTM D4964-96(2012)e1 Standard Test Method for Tension and Elongation of Elastic Fabrics (Constant-Rate-of-Extension Type Tensile Testing Machine)
- ASTM C1222-09 Standard Practice for Evaluation of Laboratories Testing Hydraulic Cement
- ASTM D2168-90(1996)e1 Standard Test Methods for Calibration of Laboratory Mechanical-Rammer Soil Compactors
- ASTM C1222-23 Standard Practice for Evaluation of Laboratories Testing Hydraulic Cement
- ASTM C1222-13e1 Standard Practice for Evaluation of Laboratories Testing Hydraulic Cement
- ASTM C1222-17 Standard Practice for Evaluation of Laboratories Testing Hydraulic Cement
- ASTM C1222-13 Standard Practice for Evaluation of Laboratories Testing Hydraulic Cement
- ASTM D216-77(1982) Standard test method for calibration of laboratory mechanical earth compactors
- ASTM D969-85(2003)e1 Standard Test Method for Laboratory Determination of Degree of Bleeding of Traffic Paint
- ASTM D969-85(1998) Standard Test Method for Laboratory Determination of Degree of Bleeding of Traffic Paint
- ASTM D4427-23 Standard Classification of Peat Samples by Laboratory Testing
- ASTM D96-73(1984) Laboratory test method for degree of bleeding of road marking paint
- ASTM D96-88(1998) Laboratory test method for degree of bleeding of road marking paint
- ASTM E982-94(1998) Standard Specification for Laboratory Glass Test Tubes
- ASTM E982-94(2004) Standard Specification for Laboratory Glass Test Tubes
- ASTM E982-94(2021) Standard Specification for Laboratory Glass Test Tubes
- ASTM E596-96(2002) Standard Test Method for Laboratory Measurement of Noise Reduction of Sound-Isolating Enclosures
- ASTM E596-96(2002)e1 Standard Test Method for Laboratory Measurement of Noise Reduction of Sound-Isolating Enclosures
- ASTM E596-96(2009) Standard Test Method for Laboratory Measurement of Noise Reduction of Sound-Isolating Enclosures
- ASTM F1588-96(2007) Standard Test Method for Constant Tensile Load Joint Test (CTLJT)
- ASTM F1588-96(2019) Standard Test Method for Constant Tensile Load Joint Test (CTLJT)
- ASTM D5361/D5361M-11 Standard Practice for Sampling Compacted Bituminous Mixtures for Laboratory Testing
- ASTM D5361/D5361M-16(2022) Standard Practice for Sampling Compacted Asphalt Mixtures for Laboratory Testing
- ASTM D5361/D5361M-16 Standard Practice for Sampling Compacted Asphalt Mixtures for Laboratory Testing
- ASTM D5361/D5361M-14 Standard Practice for Sampling Compacted Bituminous Mixtures for Laboratory Testing
- ASTM D4964-96(2004) Standard Test Method for Tension and Elongation of Elastic Fabrics (Constant-Rate-of-Extension Type Tensile Testing Machine)
- ASTM D5744-12 Standard Test Method for Laboratory Weathering of Solid Materials Using a Humidity Cell
- ASTM A318-56 Method of Tension Testing and Inspection of Steel Spring Wire
Korean Agency for Technology and Standards (KATS), Tensile test laboratory
KR-KS, Tensile test laboratory
- KS I ISO TS 20612-2019 Water quality — Interlaboratory comparisons for proficiency testing of analytical chemistry laboratories
- KS Q ISO/IEC 17025-2019 General requirements for the competence of testing and calibration laboratories
- KS Q ISO 13528-2017 Statistical methods for use in proficiency testing by interlaboratory comparisons
American National Standards Institute （ANSI), Tensile test laboratory
IN-BIS, Tensile test laboratory
Taiwan Provincial Standard of the People's Republic of China, Tensile test laboratory
- CNS 15009-2006 Proficiency testing by interlaboratory comparisons
- CNS 13125-1992 Development and Operation of Laboratory Proficiency Testing
- CNS 17025-2007 General requirements for the competence of testing and calibration laboratories
- CNS 17025-2001 General requirements for the competence of testing and calibration laboratories
- CNS 10924-1984 Method of Test for Fiber Optic Devices (Tensile Proof Test)
- CNS 6263.1-1991 Method of Test for Strollers and Carriages(Tension Test)
- CNS 6263-1-1991 Method of Test for Strollers and Carriages(Tension Test)
- CNS 4798.21-1995 Method of test for toy safety (Tension test)
- CNS 13724-1996 Method of Test for Pull Strength of Microelectronic Wire Bonds
- CNS 4798-21-1995 Method of test for toy safety (Tension test)
- CNS 13134-1993 Method of Test for Air Tightness of Building Joints in Laboratory
- CNS 13123-1992 General Requirements for The Acceptance of Testing Laboratories
International Organization for Standardization (ISO), Tensile test laboratory
- ISO/IEC Guide 43-2:1997 Proficiency testing by interlaboratory comparisons - Part 2: Selection and use of proficiency testing schemes by laboratory accreditation bodies
- ISO/IEC Guide 43-1:1997 Proficiency testing by interlaboratory comparisons - Part 1: Development and operation of proficiency testing schemes
- ISO 17892-11:2019 Geotechnical investigation and testing — Laboratory testing of soil — Part 11: Permeability tests
- ISO/IEC GUIDE 25:1990 General requirements for the competence of calibration and testing laboratories
- ISO 10191:2021 Passenger car tyres — Verifying tyre capabilities — Laboratory test methods
- ISO 17892-7:2017 Geotechnical investigation and testing — Laboratory testing of soil — Part 7: Unconfined compression test
- ISO 15195:2018 Laboratory medicine — Requirements for the competence of calibration laboratories using reference measurement procedures
- ISO/IEC GUIDE 38:1983 General requirements for the acceptance of testing laboratories
- ISO 9705:1993 Fire tests; full-scale room test for surface products
- ISO 4142:2002 Laboratory glassware - Test tubes
- ISO/TS 20612:2007 Water quality - Interlaboratory comparisons for proficiency testing of analytical chemistry laboratories
- ISO 6892-1:2019 Metallic materials — Tensile testing — Part 1: Method of test at room temperature
- ISO 10191:2010 Passenger car tyres - Verifying tyre capabilities - Laboratory test methods
- ISO 10191:1993 Passenger car tyres; verifying tyre capabilities; laboratory test methods
- ISO 718:1982 Laboratory glassware — Methods for thermal shock tests
- ISO 1775:1975 Porcelain laboratory apparatus; Requirements and methods of test
- ISO 3696:1987 Water for analytical laboratory use; Specification and test methods
- ISO 13528:2022 Statistical methods for use in proficiency testing by interlaboratory comparison
- ISO 10191:1995 Passenger car tyres - Verifying tyre capabilities - Laboratory test methods
- ISO/TS 17892-8:2004/Cor 1:2006 Geotechnical investigation and testing - Laboratory testing of soil - Part 8: Unconsolidated undrained triaxial test
- ISO 11378-1:2000 Textile floor coverings - Laboratory soiling tests - Part 1: Kappasoil test
- ISO 6892-1:2009 Metallic materials - Tensile testing - Part 1: Method of test at room temperature
- ISO 6892-1:2016 Metallic materials - Tensile testing - Part 1: Method of test at room temperature
- ISO 7500-1:2004 Metallic materials - Verification of static uniaxial testing machines - Part 1: Tension/compression testing machines - Verification and calibration of the force-measuring system
- ISO/TR 18112:2006 Clinical laboratory testing and in vitro diagnostic test systems - In vitro diagnostic medical devices for professional use - Summary of regulatory requirements for information supplied by the manufacturer
Military Standard of the People's Republic of China-General Armament Department, Tensile test laboratory
- GJB 165.3-1986 Fuze laboratory test Fuze delay tube ignition capability test
- GJB 2725-1996 General requirements for calibration laboratories and testing laboratories
- GJB 2725A-2001 General requirements for testing laboratories and calibration laboratories
- GJB 165.5-1986 Fuze laboratory test Fuze rotation test
- GJB 165.3A-2019 Fuze Laboratory Test Part 3: Fuze Delay Barrel Ignition Capability Test
- GJB 165.3A-2004 Fuze Laboratory Test Part 3: Fuze Delay Barrel Ignition Capability Test
- GJB 165.2-1986 Fuze laboratory test Fuze explosion safety test
- GJB 165.4-1986 Fuze laboratory test Fuze explosion integrity test
- GJB 715.15-1990 Fastener test methods torque - tension
- GJB 165.5A-2021 Laboratory testing of fuzes Part 5: Fuze rotation test
- GJB 165.5A-2004 Laboratory testing of fuzes Part 5: Fuze rotation test
- GJB 165.4A-2004 Laboratory testing of fuzes Part 4: Fuze explosion integrity test
- GJB 165.4A-2021 Laboratory testing of fuzes Part 4: Fuze explosion integrity test
- GJB 165.6-1986 Fuze laboratory test Fuze static clock mechanism time measurement test
中国国家认证认可监督管理委员会, Tensile test laboratory
- RB/T 183-2017 Laboratory proficiency testing system table
- RB/T 184-2017 Laboratory proficiency testing technical requirements for phytosanitary
- RB/T 210-2017 Technical requirements for laboratory proficiency testing in the field of animal quarantine
IT-UNI, Tensile test laboratory
HU-MSZT, Tensile test laboratory
TH-TISI, Tensile test laboratory
- TIS 5043.1-1997 Proficiency testing by interlaboratory comparisons.part 1: development and operation of proficiency testing schemes
- TIS 5043.2-1997 Proficiency testing by interlaboratory comparisons.part 2: selection and use of proficiency testing schemes by laboratory accreditation bodies
- TIS 2172-2004 Tensile testing at ambient temperature for metallic materials [iso title: metallic materials.tensile testing at ambient temperature]
- TIS 2172.1-2013 Metallic materials-tensile testing-part 1:method for test at room temperature
German Institute for Standardization, Tensile test laboratory
- DIN EN 10002-1:2001 Metallic materials - Tensile testing - Part 1: Method of testing at ambient temperature; German version EN 10002-1:2001
- DIN EN ISO/IEC 17025:2005 General requirements for the competence of testing and calibration laboratories (ISO/IEC 17025:2005); German and English version EN ISO/IEC 17025:2005
- DIN EN ISO/IEC 17025:2018-03 General requirements for the competence of testing and calibration laboratories (ISO/IEC 17025:2017); German and English version EN ISO/IEC 17025:2017
- DIN EN 12155:2000 Curtain walling - Watertightness - Laboratory test under static pressure; German version EN 12155:2000
- DIN EN ISO 15189:2023-03 Medical laboratories - Requirements for quality and competence (ISO 15189:2022); German version EN ISO 15189:2022
- DIN EN ISO 4142:2003 Laboratory glassware - Test tubes (ISO 4142:2002); German version EN ISO 4142:2002
- DIN EN ISO 4142:2003-01 Laboratory glassware - Test tubes (ISO 4142:2002); German version EN ISO 4142:2002
- DIN EN ISO 15195:2019 Laboratory medicine - Requirements for the competence of calibration laboratories using reference measurement procedures (ISO 15195:2018)
- DIN ISO 3696:1991 Water for analytical laboratory use; specification and test methods; identical with ISO 3696:1987
- DIN EN 14727:2006 Laboratory furniture - Storage units for laboratories - Requirements and test methods; English version of DIN EN 14727:2006-03
- DIN 51214:1977 Testing of Steel; Tensile Test for Round Wires Using Knotted Specimens
- DIN EN ISO 6892-1:2020-06 Metallic materials - Tensile testing - Part 1: Method of test at room temperature (ISO 6892-1:2019); German version EN ISO 6892-1:2019
- DIN 12851:1974 Laboratory porcelain; requirements, methods of test
- DIN EN ISO 15195:2019-07 Laboratory medicine - Requirements for the competence of calibration laboratories using reference measurement procedures (ISO 15195:2018); German version EN ISO 15195:2019
- DIN EN ISO 11378-2:2003 Textile floor coverings - Laboratory soiling tests - Part 2: Drum test (ISO 11378-2:2001); German version EN ISO 11378-2:2001
- DIN ISO 13528:2020-09 Statistical methods for use in proficiency testing by interlaboratory comparison (ISO 13528:2015, Corrected version 2016-10-15); Text in German and English
- DIN ISO/TS 17892-6:2005 Geotechnical investigation and testing - Laboratory testing of soil - Part 6: Fall cone test (ISO/TS 17892-6:2004); German version CEN ISO/TS 17892-6:2004
- DIN EN 13150:2001 Workbenches for laboratories - Safety requirements and test methods; German version EN 13150:2001
Association Francaise de Normalisation, Tensile test laboratory
- NF A03-001-1:2009 Metallic materials - Tensile testing - Part 1 : method of test at room temperature.
- NF X50-061:2000 General requirements for the competence of testing and calibration laboratories.
- NF X15-202:2006 Laboratory furniture - Storage units for laboratories - Requirements and test methods.
- NF EN ISO 10734:2016 Chaussures - Méthodes d'essai pour des fermetures à glissière - Résistance des tirettes des fermetures à glissière
- NF X15-204:1986 Laboratory equipment. Benches. Test methods.
- NF B35-801:1972 Laboratory glassware. Porcelain laboratory apparatus. Quality and methods of test.
- NF S92-062*NF EN ISO 15195:2019 Laboratory medicine - Requirements for the competence of calibration laboratories using reference measurement procedures
- NF X15-205:1986 Laboratory equipment. Furnitures. Test methods.
- NF A03-002:1991 METALLIC MATERIALS. TENSILE TESTING. PART 2 : VERIFICATION OF THE FORCE MEASURING SYSTEM OF THE TENSILE TESTING MACHINES. (EUROPEAN STANDARD EN 10002-2).
- NF X06-510*NF ISO 13528:2015 Statistical methods for use in proficiency testing by interlaboratory comparison
- NF P28-104*NF EN 12155:2000 Curtain walling - Watertightness - Laboratory test under static pressure
- NF EN ISO 15189:2022 Laboratoires médicaux - Exigences concernant la qualité et la compétence
- NF EN ISO 4142:2002 Verrerie de laboratoire - Tubes à essais
- NF X15-206:2010 Laboratory fume cupboards - Threshold for confinement test.
- NF S92-060*NF EN ISO 15189:2012 Medical laboratories - Requirements for quality and competence
- NF B35-701:1962 Laboratory glassware. Ionisation manometers.
- NF G35-054-2*NF EN ISO 11378-2:2001 Textile floor coverings - Laboratory soiling tests - Part 2 : drum test
- NF ISO 13528:2022 Méthodes statistiques utilisées dans les essais d'aptitude par comparaison interlaboratoires
- NF R12-755:2010 Passenger car tyres - Verifying tyre capabilities - Laboratory test methods.
- NF B30-109*NF ISO 718:1986 Laboratory glassware. Methods for thermal shock tests.
- NF V03-902:1995 Oilseeds. Reduction of laboratory sample to test sample.
- NF EN 12155:2000 Façades rideaux - Détermination de l'étanchéité à l'eau - Essai de laboratoire sous pression statique
- NF P98-282:2007 Tests relating to pavement - Waterproofing materials for structures - Measurement of adherence of materials to the substrate - Laboratory or in-situ testing at controlled tensile test speed
未注明发布机构, Tensile test laboratory
- GJB 15481-2001 General requirements for competence of testing and calibration laboratories
- SAE J2334-201604 Laboratory Cyclic Corrosion Test
- DIN EN ISO 17025:2005 General requirements for the competence of testing and calibration laboratories (ISO/IEC 17025:2005)
British Standards Institution (BSI), Tensile test laboratory
- BS EN 12155:2000 Curtain walling - Watertightness - Laboratory test under static pressure
- BS 6460-1:1983 Accreditation of testing laboratories - Specification of the general requirements for the technical competence of testing laboratories
- BS EN 14727:2005 Laboratory furniture - Storage units for laboratories - Requirements and test methods
- BS EN 14727:2006 Laboratory furniture. Storage units for laboratories. Requirements and test methods
- BS EN ISO/IEC 17025:2017 General requirements for the competence of testing and calibration laboratories
- BS EN ISO/IEC 17025:2005 General requirements for the competence of testing and calibration laboratories
- BS EN ISO 11378-2:2001 Textile floor coverings - Laboratory soiling tests - Drum test
- BS EN 10002-2:1992(1998) Metallic materials; tensile testing; part 2: verification of the force measuring system of the tensile testing machines
- BS EN ISO 15189:2022 Medical laboratories. Requirements for quality and competence
- BS EN ISO 4142:2002 Laboratory glassware - Test tubes
- BS EN ISO 664:2008 Oilseeds - Reduction of laboratory sample to test sample
- BS ISO 10191:2010 Passenger car tyres - Verifying tyre capabilities - Laboratory test methods
- BS EN ISO 3696:1987 Water for analytical laboratory use - Specification and test methods
- BS EN ISO/IEC 15423:2010 Water for analytical laboratory use - Specification and test methods
- BS EN ISO 3696:1995 Water for analytical laboratory use - Specification and test methods
- BS 3517:1991 Methods for thermal shock tests on laboratory glassware
- BS EN 13286-2:2010 Unbound and hydraulically bound mixtures. Test methods for laboratory reference density and water content. Proctor compaction
- BS EN 13286-2:2010(2012) Unbound and hydraulically bound mixtures. Test methods for laboratory reference density and water content. Proctor compaction
- BS EN 13286-2:2004 Unbound and hydraulically bound mixtures - Test methods for the determination of the laboratory reference density and water content - Proctor compaction
- BS ISO 13528:2022 Statistical methods for use in proficiency testing by interlaboratory comparison
- BS EN ISO 6892-1:2016 Metallic materials. Tensile testing. Method of test at room temperature
- BS EN ISO 6892-1:2019 Metallic materials. Tensile testing. Method of test at room temperature
- BS 7530-1:1992 Methods for froth flotation testing of hard coal - Laboratory procedure
- BS EN 10319-1:2003 Metallic materials. Tensile stress relaxation testing. Procedure for testing machines
- BS EN 10002-3:1995(1999) Metallic Materials - Tensile Testing - Part 5: Method of Testing at Elevated Temperature
- BS EN 10319-1:2003(2016) Metallic materials. Tensile stress relaxation testing. Procedure for testing machines
- BS EN 10002-4:1995(1999) Metallic Materials - Tensile Testing - Part 5: Method of Testing at Elevated Temperature
- BS EN 10002-5:1992(1999) Metallic Materials - Tensile Testing - Part 5: Method of Testing at Elevated Temperature
- BS DD ENV 13050:2001 Curtain walling - Watertightness - Laboratory test under dynamic condition of air pressure and water spray
- BS EN 13050:2011 Curtain Walling. Watertightness. Laboratory test under dynamic condition of air pressure and water spray
- BS ISO 22987:2020 Ships and marine technology. Laboratory test method for skin friction of antifouling paints by rotating drum
ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Tensile test laboratory
RU-GOST R, Tensile test laboratory
- GOST 33696-2015 Drilling fluids. Laboratory testing
- GOST R 53022.3-2008 Clinical laboratory technologies. Requirements of quality of clinical laboratory tests. Part 3. Assessment of laboratory tests clinical significance
- GOST 30416-1996 Soils. Laboratory testing. General
- GOST R ISO 13528-2010 Statistical methods. Using in proficiency testing by interlaboratory comparison tests
- GOST R ISO/IEC 17025-2000 General requirements for the competence of testing and calibration laboratories
- GOST R ISO/IEC 17025-2006 General requirements for the competence of testing and calibration laboratories
- GOST R ISO 5696-2002 Trailers of tractors. Brakes and braking devices. Laboratory test method
- GOST R 8.692-2009 State system for ensuring the uniformity of measurements. Requirements for the competence of providers of proficiency testing for test laboratories by interlaboratory comparisons
- GOST 1497-1984 Metals. Methods of tension test
- GOST R 59597-2021 Soils. Laboratory method for triaxial test of frozen soils
- GOST R 51000.3-1996 General criteria for testing laboratories
- GOST R 53022.4-2008 Medical laboratory technologies. Requirement of quality of clinical laboratory tests. Part 4. Rules for development of requirements to timeliness of laboratory information submitting
- GOST R 57444-2017 Identification of chemical production. Guidance for laboratory testing
- GOST 9651-1984 Metals. Methods of tension tests at elevated temperatures
- GOST 12004-1981 Reinforcing-bar steel. Tensile test methods
- GOST 31299-2005 Noise of machines. Determination of sound insulation performances of cabins. Laboratory and in situ test
- GOST R 50779.60-2017 Statistical methods for use in proficiency testing by interlaboratory comparison
- GOST 9.048-1989 Unified system of corrosion and ageing protection. Technical items. Methods of laboratory tests for mould resistance
- GOST 30416-2012 Soils. Laboratory testing. General requirements
- GOST 12174-1976 Cables. Method of testing the metallic sheath for elongation
Professional Standard - Machinery, Tensile test laboratory
- JB/T 7439.2-1994 Terminology relating to laboratory instruments - Dynamic test instrument
- JB/T 6073-1992 Metal coating. Laboratory complete immersion corrosion test
- JB/T 7439.3-1994 Terminology relating to laboratory instruments - Climatic and environmental test equipment
- JB/T 9373-2014 Tensile-creep testing machines.Specification
- JB/T 9373-1999 Specifications for the tensile - creep testing machines
SE-SIS, Tensile test laboratory
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Tensile test laboratory
- GB/T 27409-2010 Application of proficiency testing in the medical laboratory
- GB/T 4909.3-1985 Test methods for bare wires--Tensile test
- GB/T 41641-2022 Mechanical properties measurement—Room temperature tensile test on REBCO wires
- GB/T 30098-2013 Laboratory magnetic driven autoclave
- GB/T 15483.2-1999 Proficiency testing by interlaboratory comparisons--Part 2: Selection and use of proficiency testing schemes by laboratory accreditation bodies
- GB/T 32498-2016 Metal matrix composites.Tensile testing.Method of test at ambient temperature
- GB/T 21298-2007 Laboratory glassware.Text tubes
- GB/T 16825.2-2005 Verification of static uniaxial testing machines.Part 2:Tension creep testing machines.Verification of the applied force
- GB/T 16825.2-2018 Verification of static uniaxial testing machines.Part 2:Tension creep testing machines.Verification of the applied force
- GB/T 228.1-2021 Metallic materials—Tensile testing—Part 1: Method of test at room temperature
- GB/T 228.1-2010 Metallic materials.Tensile testing.Part 1: Method of test at room temperature
- GB/T 4909.3-2009 Test methods for bare wires.Part 3:Tensile test
- GB/T 228-2002 Metallic materials--Tensile testing at ambient temperature
- GB/T 29479.2-2020 Mobile laboratory—Part 2: Competence requirements
- GB/T 31527-2015 Mechanical properties measurement.Room temperature tensile test of NbTi/Cu composite superconductors
- GB/T 21747-2008 Educational laboratory equipment.Safety requirements and test methods for laboratory workbenches
- GB 6579-1986 Laboratory glassware－Methods for thermal shock test
- GB/T 4757-2001 Methods for the batch flotation testing of fine coal
- GB/T 6579-1986 Laboratory glassware--Methods for thermal shock test
- GB/T 6682-1992 Water for analytical laboratory use--Specification and test methods
- GB/T 4757-2013 Methods for the batch flotation testing of fine coal
- GB/T 6682-2008 Water for analytical laboratory use.Specification and test methods
- GB/T 13942.1-1992 Method for laboratory test of natural decay resistance of woods
- GB/T 16825.1-2002 Verification of static uniaxial testing machines--Part 1: Tension/compression testing machines--Verification and calibration of the force-measuring system
- GB/T 16825.1-2008 Inspection of static uniaxial testing machines - Part 1: Inspection and calibration of force measuring systems of tensile and/or compressive testing machines
- GB/T 28043-2011 Statistical methods for use in proficiency testing by interlaboratory comparisons
Military Standards (MIL-STD), Tensile test laboratory
Sichuan Provincial Standard of the People's Republic of China, Tensile test laboratory
- DB51/T 1202-2011 Specifications for proficiency testing of agricultural product inspection laboratories
- DB51/T 2161-2016 Laboratory Human Resource Management Guide
European Committee for Standardization (CEN), Tensile test laboratory
- EN 14727:2005 Laboratory furniture - Storage units for laboratories - Requirements and test methods
- CEN PREN 14727-2003 Laboratory furniture - Storage units for laboratories - Requirements and test methods
- EN 10002-2:1991 Metallic materials; tensile testing; part 2: verification of the force measuring system of the tensile testing machines
- EN 12155:2000 Curtain walling - Watertightness - Laboratory test under static pressure
- CEN ISO/TS 17892-6:2004 Geotechnical investigation and testing - Laboratory testing of soil - Part 6: Fall cone test
- EN ISO 6892-1:2019 Metallic materials - Tensile testing - Part 1: Method of test at room temperature (ISO 6892-1:2019)
- EN 10002-1:1990 Metallic materials; tensile testing; part 1: method of test
- EN 13286-2:2010 Unbound and hydraulically bound mixtures - Part 2: Test methods for laboratory reference density and water content - Proctor compaction
- EN 10002-5:1991 Metallic Materials - Tensile Testing - Part 5: Method of Testing at Elevated Temperature
- EN 13050:2011 Curtain Walling - Watertightness - Laboratory test under dynamic condition of air pressure and water spray
Standard Association of Australia （SAA）, Tensile test laboratory
SAE - SAE International, Tensile test laboratory
Society of Automotive Engineers (SAE), Tensile test laboratory
- SAE J977A-1968 INSTRUMENTATION FOR LABORATORY IMPACT TESTS
- SAE J1106-2012 Laboratory Testing Machines for Measuring the Steady State Force and Moment Properties of Passenger Car Tires
- SAE J2334-2003 Laboratory Cyclic Corrosion Test
- SAE J994-2009 Alarm Backup Electric Laboratory Performance Testing
- SAE J1561-2001 Laboratory Speed Test Procedure for Passenger Car Tires
- SAE J1106-1975 Laboratory Testing Machines for Measuring the Steady State Force and Moment Properties of Passenger Car Tires, Recommended Practice January 1975
- SAE J921A-1967 INSTRUMENT PANEL LABORATORY IMPACT TEST PROCEDURE—HEAD AREA
BELST, Tensile test laboratory
- STB 941.3-93 System of accreditation of verification ant testing laboratory of Belarus. General requirements for estimation of technical competence verification and testing laboratory
CEN - European Committee for Standardization, Tensile test laboratory
- EN ISO 17892-11:2019 Geotechnical investigation and testing - Laboratory testing of soil - Part 11: Permeability tests
- EN ISO 17892-7:2018 Geotechnical investigation and testing - Laboratory testing of soil - Part 7: Unconfined compression test
- EN 13286-2:2004 Unbound and hydraulically bound mixtures - Part 2: Test methods for the determination of the laboratory reference density and water content - Proctor compaction
RO-ASRO, Tensile test laboratory
Professional Standard - Commodity Inspection, Tensile test laboratory
- SN/T 2723.1-2010 Laboratory proficiency testing.Part 1:General principles
- SN/T 2966-2011 Proficiency testing regulations for plant quarantine
- SN/T 2723.2-2010 Laboratory proficiency testing.Part 2:Terms and glossary
- SN/T 2723.3-2010 Laboratory proficiency testing.Part 3: Format and content of proficiency testing report
- SN/T 2285-2009 Good laboratory practice for cosmetics alternative testing in vitro
- SN/T 2989-2011 Protocol on proficiency testing of entry-exit animal quarantine laboratories
Japanese Industrial Standards Committee (JISC), Tensile test laboratory
- JIS Z 2241:2022 Metallic materials -- Tensile testing -- Method of test at room temperature
- JIS Z 2241:2011 Metallic materials -- Tensile testing -- Method of test at room temperature
- JIS B 7721:1997 Verification of the force measuring system of the tensile testing machine
- JIS H 7601-1:2002 Method of tensile test for intermetallic compounds -- Part 1: Room temperature tensile test
- JIS Q 17025:2000 General requirements for the competence of testing and calibration laboratories
- JIS P 8222:1998 Pulps -- Preparation of laboratory sheets for physical testing
ES-AENOR, Tensile test laboratory
US-FCR, Tensile test laboratory
International Electrotechnical Commission (IEC), Tensile test laboratory
- ISO/IEC 17025:2017 General requirements for the competence of testing and calibration laboratories
Group Standards of the People's Republic of China, Tensile test laboratory
- T/CIMA 0057-2022 Horizontal Tensile Testing Machine
- T/CSCP 0035.8-2017 Laboratory Corrosion Tests on Low Alloy Structural Steels Part 8: Full Immersion Test Method for Laboratory Uniform Corrosion of Low Alloy Structural Steels
- T/CSCP 0035.13-2017 Laboratory Corrosion Testing of Low Alloy Structural Steels Part 13: Stress Corrosion Test Methods for Low Alloy Structural Steels
- T/CSTM 00349-2022 Specification for mineral dressing test in non-metallic ore laboratory
- T/CSCP 0035.14-2017 Laboratory corrosion tests on low alloy structural steels - Part 14: Laboratory corrosion fatigue test methods on low alloy steels
NL-NEN, Tensile test laboratory
国家能源局, Tensile test laboratory
- NB/T 10523.1-2021 Test methods for mechanical properties of drum shearers Part 1: Laboratory tests
Danish Standards Foundation, Tensile test laboratory
Lithuanian Standards Office , Tensile test laboratory
- LST EN 14727-2006 Laboratory furniture - Storage units for laboratories - Requirements and test methods
- LST EN 12155-2002 Curtain walling - Watertightness - Laboratory test under static pressure
AENOR, Tensile test laboratory
- UNE-EN 14727:2006 Laboratory furniture - Storage units for laboratories - Requirements and test methods
- UNE 115238:2005 Earth-moving machinery. Method of test for the measurement of drawbar pull
(U.S.) Ford Automotive Standards, Tensile test laboratory
VN-TCVN, Tensile test laboratory
- TCVN 7155-2002 Laboratory glassware.Thermal shock and thermal shock endurance.Test methods
- TCVN 197-2002 Metallic materials.Tensile testing at ambient temperature
- TCVN 197-1-2014 Metallic materials - Tensile testing .Part 1:Method of test at room temperature
Professional Standard - Aviation, Tensile test laboratory
- HB 5143-1980 Tensile test method for metals at room temperature
- HB 5143-1996 Tensile test method for metals at room temperature
- HB 5214-1982 Method of notched tensile test for metals at room temperature
- HB 5214-1996 Method of notched tensile test for metals at room temperature
- HB 5145-1996 Method of Tensile Test for Metal Tubing at Room Temperature
- HB 5145-1980 Method of Tensile Test for Metal Tubing at Room Temperature
- HB 20121-2012 Technical requirements of safety in temperature sensitive paint laboratory experiment
TR-TSE, Tensile test laboratory
- TS 1069-1972 METHODS OF LABORATORY TESTS FOR MEAT PRODUCTS
- TS 784-1969 METHODS FOR THERMAL SHOCK TESTS ON LABORATORY GLASSWARE
AT-ON, Tensile test laboratory
Heilongjiang Provincial Standard of the People's Republic of China, Tensile test laboratory
- DB23/T 3598-2023 Hemp Inspection and Testing Laboratory Personnel Competency Requirements
CZ-CSN, Tensile test laboratory
PL-PKN, Tensile test laboratory
U.S. Air Force, Tensile test laboratory
Professional Standard - Navy, Tensile test laboratory
The American Road & Transportation Builders Association, Tensile test laboratory
- AASHTO T 322-2007 Standard Method of Test for Determining the Creep Compliance and Strength of Hot-Mix Asphalt (HMA) Using the Indirect Tensile Test Device
ES-UNE, Tensile test laboratory
- UNE-EN ISO 15189:2023 Medical laboratories - Requirements for quality and competence (ISO 15189:2022)
- UNE-EN ISO 15195:2019 Laboratory medicine - Requirements for the competence of calibration laboratories using reference measurement procedures (ISO 15195:2018)
Shandong Provincial Standard of the People's Republic of China, Tensile test laboratory
- DB37/T 4003-2020 Neutralization test and ELISA test comparison laboratory evaluation standard
工业和信息化部/国家能源局, Tensile test laboratory
Professional Standard - Agriculture, Tensile test laboratory
- NY/T 1493-2007 Good laboratory practice for pesticide residue trials
- GB 6682-1992 Analytical laboratory water specifications and test methods
NZ-SNZ, Tensile test laboratory
- NZS 4407.3.1:1991 Methods of testing road aggregates - Laboratory tests - Test 3.1 The water content of aggregate
- NZS ISO/IEC 17025:2005 General Requirements for the Competence of Testing and Calibration Laboratories (ISO/IEC 17025:2005)
American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE), Tensile test laboratory
Professional Standard - Ferrous Metallurgy, Tensile test laboratory
- YB/T 4334-2013 Metallic foil.Method of tensile testing at room temperature
Professional Standard - Civil Aviation, Tensile test laboratory
- MH/T 6096-2013 Proficiency testing procedures for commercial aviation oil testing laboratory
NO-SN, Tensile test laboratory
- NS 8016-1988 Geotechnical testing - Laboratory methods - Determination of undrained shear strength by unconfined pressure testing
- NS 8001-1982 Geotechnical testing - Laboratory methods - Percussion liquid limit
- NS 8002-1982 Geotechnical testing - Laboratory methods - Fall cone liquid limit
- NS 8004-1982 Geotechnical testing - Laboratory methods - Shrinkage limit
- NS 8011-1982 Geotechnical testing - Laboratory methods - Density
Professional Standard - Meteorology, Tensile test laboratory
- QX/T 220-2013 Technical requirements for metrology laboratory of atmospheric pressure
FI-SFS, Tensile test laboratory
Compressed Gas Association (U.S.), Tensile test laboratory
YU-JUS, Tensile test laboratory
BE-NBN, Tensile test laboratory
- NBN T 01-211-1988 Water for analytical laboratory use - Specification and test methods
- NBN-EN 10002-2-1992 Metallic materials - Tensile testing - Part 2 : Verification of the force measuring system of the tensile testing machines
ZA-SANS, Tensile test laboratory
- SANS 3696:1987 Water for analytical laboratory use - Specification and test methods
- SANS 11378-2:2001 Textile floor coverings - Laboratory soiling tests Part 2: Drum test
- SANS 13528:2009 Statistical methods for use in proficiency testing by interlaboratory comparisons
Zhejiang Provincial Standard of the People's Republic of China, Tensile test laboratory
- DB33/T 903-2013 Classification and coding of clinical laboratory test items
国家质量监督检验检疫总局, Tensile test laboratory
- SN/T 4754-2017 Technical requirements for chemical testing proficiency verification in entry-exit laboratories
Professional Standard - Certification and Accreditation, Tensile test laboratory
- RB/T 208-2016 Internal quality control of chemical laboratory.Comparison test
VE-FONDONORMA, Tensile test laboratory
Professional Standard - Coal, Tensile test laboratory
- MT/T 144-1997 Methods for the coal flotation test by progressive release in coal separation lab
国家市场监督管理总局、中国国家标准化管理委员会, Tensile test laboratory
- GB/T 36167-2018 Method for coal preparation laboratory timed-release flotation analysis
- GB/T 28043-2019 Statistical methods for use in proficiency testing by interlaboratory comparison
American Petroleum Institute (API), Tensile test laboratory
卫生健康委员会, Tensile test laboratory