ZH
RU
ES

Tantalum thermal conductivity

Tantalum thermal conductivity, Total:498 items.

In the international standard classification, Tantalum thermal conductivity involves: Ceramics, Plastics, Rubber, Vacuum technology, Elements of buildings, Protection of and in buildings, Products of the chemical industry, Measurement of force, weight and pressure, Rubber and plastics products, Thermodynamics and temperature measurements, Wood, sawlogs and sawn timber, Non-ferrous metals, Refractories, Leather technology, Heat recovery. Thermal insulation, Construction materials, Metrology and measurement in general, Road vehicle systems, Analytical chemistry, Seals, glands, Surface treatment and coating, Pulps, Paper and board, Protective equipment, Soil quality. Pedology, Hydraulic energy engineering, External structures, Water quality, Measurement of fluid flow, Semiconducting materials, Electricity. Magnetism. Electrical and magnetic measurements, Conducting materials, Electrical wires and cables, Semiconductor devices, Insulating fluids, Ferroalloys, Protection against fire, Components and accessories for telecommunications equipment, Power stations in general, Sugar. Sugar products. Starch, Testing of metals, Organic chemicals, Solar energy engineering, Test conditions and procedures in general, Edible oils and fats. Oilseeds, Ferrous metals, Energy and heat transfer engineering in general, Graphical symbols, Paint ingredients, Power transmission and distribution networks, Heat pumps, Glass, Pipeline components and pipelines, Textile fibres.

国家市场监督管理总局、中国国家标准化管理委员会, Tantalum thermal conductivity

GB/T 39862-2021 Test method for thermal conductivity of high thermal conductivity ceramics
GB/T 39548-2020 Determination of retention rate on thermal resistance of vacuum insulation panels(VIP) in hygrothermal conditions

WRC - Welding Research Council, Tantalum thermal conductivity

BULLETIN 357-1990 CALCULATION OF ELECTRICAL AND THERMAL CONDUCTIVITIES OF METALLURGICAL PLASMAS

British Standards Institution (BSI), Tantalum thermal conductivity

BS ISO 22007-6:2014 Plastics. Determination of thermal conductivity and thermal diffusivity. Comparative method for low thermal conductivities using a temperature-modulation technique
BS EN ISO 22007-6:2015 Plastics. Determination of thermal conductivity and thermal diffusivity. Comparative method for low thermal conductivities using a temperature-modulation technique
BS EN ISO 22007-1:2017 Plastics. Determination of thermal conductivity and thermal diffusivity. General principles
BS EN ISO 12631:2017 Thermal performance of curtain walling. Calculation of thermal transmittance
BS EN ISO 22007-4:2017 Plastics. Determination of thermal conductivity and thermal diffusivity. Laser flash method
BS ISO 22007-7:2023 Plastics. Determination of thermal conductivity and thermal diffusivity - Transient measurement of thermal effusivity using a plane heat source
BS EN ISO 10077-1:2017 Thermal performance of windows, doors and shutters. Calculation of thermal transmittance - General
21/30427387 DC BS EN ISO 22007-2. Plastics. Determination of thermal conductivity and thermal diffusivity. Part 2. Transient plane heat source (hot disc) method
BS EN ISO 22007-2:2022 Plastics. Determination of thermal conductivity and thermal diffusivity - Transient plane heat source (hot disc) method
23/30465226 DC BS EN ISO 22007-1. Plastics. Determination of thermal conductivity and thermal diffusivity - Part 1. General principles
BS EN ISO 12567-2:2005 Thermal performance of windows and doors. Determination of thermal transmittance by hot box method - Roof windows and other projecting windows
BS ISO 9869-3:2023 Thermal insulation of building elements. In-situ measurement of thermal resistance and thermal transmittance - Probe insertion method
23/30466777 DC BS EN ISO 22007-4. Plastics. Determination of thermal conductivity and thermal diffusivity - Part 4. Laser flash method
BS EN ISO 11357-8:2021 Plastics. Differential scanning calorimetry (DSC). Determination of thermal conductivity
22/30427246 DC BS ISO 22007-7. Plastics. Determination of thermal conductivity and thermal diffusivity. Part 7. Measurement of thermal effusivity using a regularly-shaped transient plane source probe
BS EN ISO 14683:2017 Thermal bridges in building construction. Linear thermal transmittance. Simplified methods and default values
BS PD CEN ISO/TR 22007-5:2014 Plastics. Determination of thermal conductivity and thermal diffusivity. Results of interlaboratory testing of poly(methyl methacrylate) samples
BS EN ISO 22007-2:2015 Plastics. Determination of thermal conductivity and thermal diffusivity. Transient plane heat source (hot disc) method
PD CEN ISO/TR 22007-5:2014 Plastics. Determination of thermal conductivity and thermal diffusivity. Results of interlaboratory testing of poly(methyl methacrylate) samples
BS ISO 1853:2011 Conducting and dissipative rubbers, vulcanized or thermoplastic. Measurement of resistivity
BS EN 993-15:2005 Methods of test for dense shaped refractory products - Part 15: Determination of thermal conductivity by the hot wire (parallel) method
BS EN ISO 6946:2017 Building components and building elements. Thermal resistance and thermal transmittance. Calculation methods
BS ISO 9869-2:2018+A1:2021 Thermal insulation. Building elements. In-situ measurement of thermal resistance and thermal transmittance - Infrared method for frame structure dwelling
22/30461582 DC BS EN 673. Glass in building. Determination of thermal transmittance (U value). Calculation method
22/30441984 DC BS ISO 9869-3. Thermal insulation of building elements. In-situ measurement of thermal resistance and thermal transmittance - Part 3. Probe insertion method
DD CEN/TS 1159-4:2004 Advanced technical ceramics - Ceramic composites - Thermophysical properties - Part 4: Determination of thermal conductivity
BS EN 61788-11:2003 Superconductivity - Residual resistance ratio measurement - Residual resistance ratio of Nb3Sn composite superconductors
BS EN 61788-5:2003 Superconductivity - Matrix to superconductor volume ratio measurement - Copper to superconductor volume ratio of Cu/Nb-Ti composite superconductors
BS EN 61788-5:2001 Superconductivity - Matrix to superconductor volume ratio measurement - Copper to superconductor volume ratio of Cu/Nb-Ti composite superconductors
BS EN 61788-5:2013 Superconductivity. Matrix to superconductor volume ratio measurement. Copper to superconductor volume ratio of Cu/Nb-Ti composite superconducting wires
BS EN 61788-4:2007 Superconductivity - Residual resistance ratio measurement - Residual resistance ratio of Nb-Ti composite superconductors
BS EN 61580-8:1997 Methods of measurement for waveguides. Waveguide power holding capability
BS EN 27888:1993 Water quality. Method for the determination of electrical conductivity
BS ISO 1853:2018 Conducting and dissipative rubbers, vulcanized or thermoplastic. Measurement of resistivity
BS EN ISO 12631:2012 Thermal performance of curtain walling. Calculation of thermal transmittance
23/30445047 DC BS EN ISO 10077-2 AMD 1. Thermal performance of windows, doors and shutters. Calculation of thermal transmittance - Part 2. Numerical method for frames
PD IEC TR 63378-1:2021 Thermal standardization on semiconductor packages. Thermal resistance and thermal parameter of BGA, QFP type semiconductor packages
BS EN 60747-15:2004 Discrete semiconductor devices. Isolated power semiconductor devices
BS EN ISO 17836:2017 Thermal spraying. Determination of the deposition efficiency for thermal spraying
BS ISO 21901:2021 Thermal insulation. Test method for thermal diffusivity. Periodic heat method
BS EN ISO 15351:2010 Steel and iron - Determination of nitrogen content - Thermal conductimetric method after fusion in a current of inert gas (Routine method)
BS IEC 62830-5:2021 Semiconductor devices. Semiconductor devices for energy harvesting and generation. Test method for measuring generated power from flexible thermoelectric devices
BS EN ISO 3915:1999 Plastics - Measurement of resistivity of conductive plastics
BS EN ISO 3915:2022 Plastics. Measurement of resistivity of conductive plastics
BS EN 62004:2009 Thermal-resistant aluminium alloy wire for overhead line conductor
BS EN 60747-15:2012 Semiconductor devices. Discrete devices. Isolated power semiconductor devices

American Welding Society (AWS), Tantalum thermal conductivity

WRC 357:1990 Calculation of Electrical and Thermal Conductivities of Metallurgical Plasmas

ESDU - Engineering Sciences Data Unit, Tantalum thermal conductivity

ESDU 84010-1984 Thermal conductivity of liquid Aromatic hydrocarbons
ESDU 93017-1993 Thermal conductivity of liquid carboxylic acids
ESDU 00021-2000 Thermal conductivity of liquid aliphatic nitriles
ESDU 88004-1988 Thermal conductivity of liquid mixtures
ESDU 78039-1978 Thermal conductivity of ice@ water and steam.
ESDU 98018-1998 Thermal conductivity of liquid Halogenated aromatic hydrocarbons
ESDU 95018-1995 Thermal conductivity of liquid Aliphatic ethers
ESDU 97008-1997 Thermal conductivity of liquid Aliphatic aldehydes and ketones
ESDU 99012-1999 Thermal conductivity of liquid aliphatic diesters
ESDU 96023-1996 Thermal conductivity of Branched chain liquid aliphatic esters
ESDU 96018-1996 Thermal conductivity of straight chain liquid aliphatic esters
ESDU 83015-1983 Thermal conductivity of liquid heterocyclic nitrogen compounds
ESDU 76030-1976 Thermal conductivity of carbon dioxide gas and liquid.
ESDU 99013 A-2000 Thermal conductivity of liquid glycols@ glycerol and their aqueous solutions
ESDU 94022-1994 Thermal conductivity of liquid halogenated aliphatic hydrocarbons Part 2. Halogenated ethanes
ESDU 99011 A-2003 Thermal conductivity@ viscosity@ isobaric specific heat capacity and Prandtl number of gases at low pressure: Aliphatic hydrocarbons - alkanes.
ESDU 68023-1978 Thermal conductivity@ viscosity@ heat capacity@ density and Prandtl number of solid@ liquid and gaseous heavy water.
ESDU 02004 A-2003 Thermal conductivity@ viscosity@ isobaric specific heat capacity and Prandtl number of gases at low pressure: halogenated hydrocarbons - haloethanes.
ESDU 00052-2001 Thermal conductivity@ viscosity@ isobaric specific heat capacity and Prandtl number of gases at low pressure: oxygenated hydrocarbons - aliphatic esters.
ESDU 02003-2002 Thermal conductivity@ viscosity@ isobaric specific heat capacity and Prandtl number of gases at low pressure: halogenated hydrocarbons - halomethanes.
ESDU 94023-1994 Thermal conductivity of liquid halogenated aliphatic hydrocarbons Part 3. Halogenated higher hydrocarbons (C3 to C16)
ESDU 00019-2001 Thermal conductivity@ viscosity@ isobaric specific heat capacity and Prandtl number of gases at low pressure: oxygenated aliphatic hydrocarbons - alcohols@ aldehydes@ ketones and ethers.
ESDU 03008-2003 Thermal conductivity@ viscosity@ isobaric specific heat capacity and Prandtl number of gases at low pressure: Halogenated hydrocarbons - halopropanes@ butanes@ ethylenes@ benzenes.
ESDU 91004-1991 Pitching moment derivative due to rate of pitch for projectiles at supersonic speeds.
ESDU 93017 A-2005 Thermal conductivity of liquids: Carboxylic acids.

Korean Agency for Technology and Standards (KATS), Tantalum thermal conductivity

KS L 1202-2009(2019) Thermal conductivity of whiteware ceramics
KS L 1202-1999 Thermal conductivity of whiteware ceramics
KS L 1202-1986 Thermal conductivity of whiteware ceramics
KS A 0506-1-2013 Methods of calibration for thermal conductivity gauge
KS A 0506-1-2002(2012) Methods of calibration for thermal conductivity gauge
KS B 0084-2017 Measuring methods of low pressures by thermal conductivity gauge
KS F 2463-2009 Method of thermal conductivity test for materials
KS F 2463-1986 Method of thermal conductivity test for materials
KS L ISO 9869-2006(2021) Thermal insulation－Building elements－In-situ measurement of thermal resistance and thermal transmittance
KS L 3121-2015(2021) Testing method for thermal conductivity of insulating refractory bricks
KS L 3121-1980 Testing method for thermal conductivity of insulating refractory bricks
KS L 1604-2017 Fine ceramics－Determination of thermal diffusivity, specific heat capacity,and thermal conductivity of monolithic ceramics by laser flash method
KS L 1202-2009 Thermal conductivity of whiteware ceramics
KS L ISO 10051-2006(2021) Thermal insulation－Moisture effects on heat transfer－Determination of thermal transmissivity of a moist material
KS M ISO 10051-2012(2017) Thermal insulation－Moisture effects on heat transfer－Determination of thermal transmissivity of a moist material
KS L ISO 10051-2006(2016) Thermal insulation－Moisture effects on heat transfer－Determination of thermal transmissivity of a moist material
KS L 3306-2007(2012) Testing method for thermal conductivity of firebricks by hot wire
KS L 3306-1980 Testing method for thermal conductivity of firebricks by hot wire
KS L 1604-2017(2022) Fine ceramics－Determination of thermal diffusivity, specific heat capacity,and thermal conductivity of monolithic ceramics by laser flash method
KS F 2463-2019 Standard test method of thermal conductivity for materials by means of the guarded hot plate
KS L ISO 8894-2:2022 Refractory materials — Determination of thermal conductivity — Part 2: Hot-wire method(parallel)
KS L ISO 8894-2:2016 Refractory materials-Determination of thermal conductivity-Part2:Hot-wire methods(parallel)
KS R ISO 7882:2005 Road vehicles-Brake linings-Determination of thermal conductivity by guarded hot-plate apparatus
KS R ISO 7882:2015 Road vehicles-Brake linings-Determination of thermal conductivity by guarded hot-plate apparatus
KS M ISO 1853:2018 Conducting and dissipative rubbers, vulcanized or thermoplastic — Measurement of resistivity
KS I ISO 7888:2007 Water quality－Determination of electrical conductivity
KS I ISO 7888-2007(2017) Water quality－Determination of electrical conductivity
KS M ISO 1853:2008 Conducting and dissipative rubbers, vulcanized or thermoplastic－Measurement of resistivity
KS L ISO 8894-1:2022 Refractory materials — Determination of thermal conductivity — Part 1: Hot-wire methods(cross-array and resistance thermometer)
KS L ISO 8894-1:2016 Refractory materials-Determination of thermal coductivity-Part 1:Hot-wire methods(cross-array and resistance thermometer
KS L 1604-2002 Fine ceramics－Determination of thermal diffusivity, specific heat capacity,and thermal conductivity of monolithic ceramics by laser flash method
KS M ISO 13787:2013 Thermal insulation products for building equipment and industrial installations — Determination of declared thermal conductivity
KS D 0240-2010 Measuring methods for electrical resistivity and conductivity of non-ferrous metals
KS F ISO 5660-1:2008 Reaction-to-fire tests－Heat release, smoke production and mass loss rate－Part 1：Heat release rate(cone calorimeter method)
KS I ISO 11265:2005 Soil quality-Determination of the specific electrical conductivity
KS C IEC 61788-11:2005 Superconductivity－Part 11：Residual resistance ratio measurement－Residual resistance ratio of Nb3Sn composite superconductors
KS C IEC 61788-5:2002 Superconductivity-Part 5:Matrix to superconductor volume ratio measurement-Copper to superconductor volume ratio of Cu/Nb-Ti composite superconductors
KS C 2116-1996 Testing method for permeability of feebly magnetic materials
KS I ISO 11265:2021 Soil quality — Determination of the specific electrical conductivity
KS I ISO 11265-2005(2015) Soil quality－Determination of the specific electrical conductivity
KS C 2607-1974(2000) TESTING METHODS OF SEMICONDUCTOR
KS C 2607-1980 TESTING METHODS OF SEMICONDUCTOR
KS D ISO 17836:2005 Thermal spraying-Determination of the deposition efficiency for thermal spraying
KS D ISO 17836-2015(2020) Thermal spraying－Determination of the deposition efficiency for thermal spraying
KS D ISO 17836:2015 Thermal spraying－Determination of the deposition efficiency for thermal spraying
KS L ISO 9869-2006(2016) Thermal insulation－Building elements－In-situ measurement of thermal resistance and thermal transmittance
KS M ISO 3915:2002 Plastics-Measurement of resistivity of conductive plastics
KS M 3034-1980(2011) Test methods for electrical resistivity of conductive plastics
KS I 8001-2009(2019) General rules for electrical conductivity measuring method
KS M ISO 3915-2002(2017) Plastics－Measurement of resistivity of conductive plastics
KS M ISO 3915-2002(2022) Plastics－Measurement of resistivity of conductive plastics
KS M 3034-1985 Test methods for electrical resistivity of conductive plastics
KS B 8219-1-2009 Ground source heat pump--Thermal conductivity test mothod--Part 1：Vertical close loop type and energy file type
KS L 2514-2011(2021) Testing method on transmittance and emittance of heat glasses and evaluation of solar heat gain coefficient
KS C IEC 61580-8-2014(2019) Methods of measurement for waveguides — Part 8: Waveguide power holding capability
KS M ISO 9967:2003 Thermoplastics pipes-Determination of creep ratio

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Tantalum thermal conductivity

GB/T 11205-2009 Rubber.Determination of thermal conductivity by means of hot.Wire method
GB/T 11205-1989 Rubber--Determination of thermal conductivity by means of transient hot-wire method
GB/T 2439-2001 Conducting and dissipative rubbers,vulcanized or thermoplastic--Measurement of resistivity
GB/T 31564-2015 Thermal spraying.Determination of the deposition efficiency for thermal spraying
GB/T 42483-2023 Determination of thermal conductivity of wood by heat flow method
GB/T 13580.3-1992 Determination of specific conductance in the wet precipitation
GB/T 23977-2009 Dyestuffs.Determination of content of salt.Conductance method
GB 13580.3-1992 Method for Determination of Conductivity of Atmospheric Precipitation Water

Professional Standard - Aerospace, Tantalum thermal conductivity

QJ 20027-2011 Test method for thermal conductivity of thermal conductive grease at low temperature
QJ 1181.6A-1995 Heat Treatment of Soft Magnetic Alloys Heat Treatment of Constant Magnetic Permeability Alloys
QJ 1402-1988 Test method for low temperature thermal conductivity of metals
QJ 809-1983 Method for determination of thermal conductivity of solid propellants and solid motor insulation
QJ 809-1994 Quasi-steady-state method for the determination of thermal conductivity and specific heat capacity of composite solid propellants

Association Francaise de Normalisation, Tantalum thermal conductivity

NF T51-227-6*NF EN ISO 22007-6:2015 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 6 :comparative method for low thermal conductivities using a temperature-modulation technique
NF EN ISO 22007-6:2015 Plastiques - Détermination de la conductivité thermique et de la diffusivité thermique - Partie 6 : méthode comparative pour faibles conductivités thermiques utilisant une technique de modulation de la température
NF T51-227-1:2012 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 1 : general principles.
NF T51-227-1*NF EN ISO 22007-1:2017 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 1 : general principles
NF EN ISO 22007-2:2022 Plastiques - Détermination de la conductivité thermique et de la diffusivité thermique - Partie 2 : Méthode de la source plane transitoire (disque chaud)
NF T51-227-2:2012 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 2 : transient plane heat source (hot disk) method.
NF T51-227-2*NF EN ISO 22007-2:2015 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 2 : transient plane heat source (hot disc) method
NF T51-227-4:2012 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 4 : laser flash method.
NF EN ISO 22007-3:2012 Plastiques - Détermination de la conductivité thermique et de la diffusivité thermique - Partie 3 : méthode par analyse de l'oscillation de la température
NF T51-227-3*NF EN ISO 22007-3:2012 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 3 : temperature wave analysis method
NF X10-025:1991 Isolation thermique - Détermination de la résistance thermique et de la conductivité thermique en régime stationnaire - Méthode fluxmétrique
NF T51-507-8:2021 Plastics - Differential scanning calorimetry (DSC) - Part 8 : determination of thermal conductivity
NF A91-240*NF EN 16813:2016 Thermal spraying - Measurement of the electrical conductivity of thermal sprayed non-iron metal coatings by means of eddy current method
NF EN ISO 6946:2017 Composants et parois de bâtiments - Résistance thermique et coefficient de transmission thermique - Méthodes de calcul
NF T46-099*NF ISO 1853:2019 Conducting and dissipative rubbers, vulcanized or thermoplastic - Measurement of resistivity
NF EN 16813:2016 Projection thermique - Mesurage de la conductivité électrique des revêtements métalliques non ferreux obtenus par projection thermique, à l'aide de la méthode par courants de Foucault
NF P50-788*NF ISO 16957:2018 Measurement of apparent thermal conductivity of wet porous building materials by a periodic method
NF T90-031*NF EN 27888:1994 Water quality - Determination of electrical conductivity.
NF EN 27888:1994 Qualité de l'eau - Détermination de la conductivité électrique
XP B43-209*XP CEN/TS 1159-4:2005 Advanced technical ceramics - Ceramic composites - Thermophysical properties - Part 4 : determination of thermal conductivity
NF P94-524*NF EN ISO 17628:2018 Geotechnical investigation and testing - Geothermal testing - Determination of thermal conductivity of soil and rock using a borehole heat exchanger
NF ISO 1853:2019 Caoutchoucs vulcanisés ou thermoplastiques conducteurs et dissipatifs - Mesurage de la résistivité
NF P50-774:2008 Thermal performance of curtain walling - Calculation of thermal transmittance.
NF P50-774:2012 Thermal performance of curtain walling - Calculation of thermal transmittance
NF EN ISO 17836:2018 Projection thermique - Détermination du rendement de dépôt en projection thermique
NF P50-774*NF EN ISO 12631:2017 Thermal performance of curtain walling - Calculation of thermal transmittance
NF ISO 11265:1995 Qualité du sol - Détermination de la conductivité électrique spécifique
NF A91-227*NF EN ISO 17836:2018 Thermal spraying - Determination of the deposition efficiency for thermal spraying
NF ISO 5660-1:2015 Essais de réaction au feu - Débit calorifique, taux de dégagement de fumée et taux de perte de masse - Partie 1 : débit calorifique (méthode au calorimètre à cône) et taux de dégagement de fumée (mesure dynamique)
NF C34-110-4*NF EN 62004:2009 Thermal-resistant aluminium alloy wire for overhead line conductor
NF X10-021:1972 Matériaux faiblement conducteurs - Détermination de la conductivité thermique - Méthode de la plaque chaude gardée avec échantillons symétriques
NF C31-888-4:2012 Superconductivity - Part 4 : residual resistance ratio measurement - Residual resistance ratio of Nb-Ti composite superconductors.
NF X31-113*NF ISO 11265:1995 Soil quality. Determination of the specific electrical conductivity.
NF T51-080*NF EN ISO 3915:2022 Plastics - Measurement of resistivity of conductive plastics
NF B40-316:1989 Refractory materials. Determination of thermal conductivity. Part 2 : hot-wire method (parallel).
NF C31-888-11:2003 Superconductivity - Part 11 : residual resistance ratio measurement - Residual resistance ratio of Nb3Sn composite superconductors.
NF C31-888-11:2011 Superconductivity - Part 11 : residual resistance ratio measurment - Residual resistance ratio of Nb3Sn composite superconductors.

International Organization for Standardization (ISO), Tantalum thermal conductivity

ISO 22007-6:2014 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 6: Comparative method for low thermal conductivities using a temperature-modulation technique
ISO 22007-2:2022 Plastics — Determination of thermal conductivity and thermal diffusivity — Part 2: Transient plane heat source (hot disc) method
ISO 22007-1:2009 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 1: General principles
ISO 22007-1:2017 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 1: General principles
ISO 22007-2:2015 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 2: Transient plane heat source (hot disc) method
ISO 22007-2:2008 Plastics — Determination of thermal conductivity and thermal diffusivity — Part 2: Transient plane heat source (hot disc) method
ISO 22007-4:2017 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 4: Laser flash method
ISO 22007-4:2008 Plastics — Determination of thermal conductivity and thermal diffusivity — Part 4: Laser flash method
ISO 22007-7:2023 Plastics — Determination of thermal conductivity and thermal diffusivity — Part 7: Transient measurement of thermal effusivity using a plane heat source
ISO 22007-3:2008 Plastics — Determination of thermal conductivity and thermal diffusivity — Part 3: Temperature wave analysis method
ISO/TR 7882:1986 Road vehicles; Brake linings; Determination of thermal conductivity by guarded hot-plate apparatus
ISO 11357-8:2021 Plastics - Differential scanning calorimetry (DSC) - Part 8: Determination of thermal conductivity
ISO 24449:2021 Metallic and other inorganic coatings - Determination of thermal conductivity of thermal barrier coatings at elevated temperature
ISO/FDIS 9869-3:2023 Thermal insulation of building elements — In-situ measurement of thermal resistance and thermal transmittance — Part 3: Probe insertion method
ISO 9869-3:2023 Thermal insulation of building elements — In-situ measurement of thermal resistance and thermal transmittance — Part 3: Probe insertion method
ISO 16957:2016 Measurement of apparent thermal conductivity of wet porous building materials by a periodic method
ISO/DIS 9869-3 Thermal insulation of building elements — In-situ measurement of thermal resistance and thermal transmittance — Part 3: Probe insertion method
ISO 2581:1975 Plastics; Rigid cellular materials; Determination of "apparent" thermal conductivity by means of a heat-flow meter
ISO/TR 22007-5:2011 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 5: Results of interlaboratory testing of poly(methyl methacrylate) samples
ISO 7888:1985 Water quality; Determination of electrical conductivity
ISO 1853:2018 Conducting and dissipative rubbers, vulcanized or thermoplastic - Measurement of resistivity
ISO 1853:2011 Conducting and dissipative rubbers, vulcanized or thermoplastic - Measurement of resistivity
ISO 5660-1:2002 Reaction-to-fire tests - Heat release, smoke production and mass loss rate - Part 1: Heat release rate (cone calorimeter method)
ISO 11265:1994 Soil quality - Determination of the specific electrical conductivity
ISO 12631:2012 Thermal performance of curtain walling - Calculation of thermal transmittance
ISO 12631:2017 Thermal performance of curtain walling - Calculation of thermal transmittance
ISO 17836:2004 Thermal spraying - Determination of the deposition efficiency for thermal spraying
ISO 17836:2017 Thermal spraying - Determination of the deposition efficiency for thermal spraying
ISO 3915:1981 Plastics; measurement of resistivity of conductive plastics
ISO 3915:2022 Plastics — Measurement of resistivity of conductive plastics
ISO 21901:2021 Thermal insulation - Test method for thermal diffusivity - Periodic heat method

RO-ASRO, Tantalum thermal conductivity

STAS 8134-1977 REFRACTARY PRODUCTS Determination of thermal conductivity
STAS 8917-1971 CONVEYOR BELTS Determination of electrical conductivity
STAS 12058-1982 THERMAL CONDUCTIVITY MEASUREMENT OF PIPES INSULATION
STAS 8790-1981 Fire precautions DETERMINATION OF THE CALORIFIC POWER

IN-BIS, Tantalum thermal conductivity

European Committee for Standardization (CEN), Tantalum thermal conductivity

EN ISO 22007-6:2015 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 6: Comparative method for low thermal conductivities using a temperature-modulation technique
prEN ISO 22007-1 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 1: General principles (ISO/DIS 22007‑1:2023)
EN ISO 11357-8:2021 Plastics - Differential scanning calorimetry (DSC) - Part 8: Determination of thermal conductivity (ISO 11357-8:2021)
EN 16813:2016 Thermal spraying - Measurement of the electrical conductivity of thermal sprayed non-iron metal coatings by means of eddy current method
EN 27888:1993 Water quality; determination of electrical conductivity (ISO 7888:1985)
EN ISO 17836:2017 Thermal spraying - Determination of the deposition efficiency for thermal spraying
EN ISO 3915:2022 Plastics - Measurement of resistivity of conductive plastics (ISO 3915:2022)
EN ISO 3915:1999 Plastics - Measurement of Resistivity of Conductive Plastics
EN 13844:2002 Textiles - Monofilaments - Determination of thermal shrinkage

American Society for Testing and Materials (ASTM), Tantalum thermal conductivity

ASTM D7896-19 Standard Test Method for Thermal Conductivity, Thermal Diffusivity, and Volumetric Heat Capacity of Engine Coolants and Related Fluids by Transient Hot Wire Liquid Thermal Conductivity Method
ASTM D7340-07(2018) Standard Practice for Thermal Conductivity of Leather
ASTM D7340-07(2018)e1 Standard Practice for Thermal Conductivity of Leather
ASTM C202-19 Standard Test Method for Thermal Conductivity of Refractory Brick
ASTM C201-93(2019) Standard Test Method for Thermal Conductivity of Refractories
ASTM C201-93(2013) Standard Test Method for Thermal Conductivity of Refractories
ASTM D7896-14 Standard Test Method for Thermal Conductivity, Thermal Diffusivity and Volumetric Heat Capacity of Engine Coolants and Related Fluids by Transient Hot Wire Liquid Thermal Conductivity Method
ASTM C182-88(1998) Standard Test Method for Thermal Conductivity of Insulating Firebrick
ASTM C182-19 Standard Test Method for Thermal Conductivity of Insulating Firebrick
ASTM C767-93(2009) Standard Test Method for Thermal Conductivity of Carbon Refractories
ASTM E1952-11 Standard Test Method for Thermal Conductivity and Thermal Diffusivity by Modulated Temperature Differential Scanning Calorimetry
ASTM E1952-23 Standard Test Method for Thermal Conductivity and Thermal Diffusivity by Modulated Temperature Differential Scanning Calorimetry
ASTM C767-93(2004) Standard Test Method for Thermal Conductivity of Carbon Refractories
ASTM C767-93(1998) Standard Test Method for Thermal Conductivity of Carbon Refractories
ASTM C767-20 Standard Test Method for Thermal Conductivity of Carbon Refractories
ASTM C767-93(2013) Standard Test Method for Thermal Conductivity of Carbon Refractories
ASTM C408-88(2016) Standard Test Method for Thermal Conductivity of Whiteware Ceramics
ASTM E516-95a(2000) Standard Practice for Testing Thermal Conductivity Detectors Used in Gas Chromatography
ASTM E516-95A Standard Practice for Testing Thermal Conductivity Detectors Used in Gas Chromatography
ASTM E516-95a(2021) Standard Practice for Testing Thermal Conductivity Detectors Used in Gas Chromatography
ASTM C408-88(1999) Standard Test Method for Thermal Conductivity of Whiteware Ceramics
ASTM F433-02(2020) Standard Practice for Evaluating Thermal Conductivity of Gasket Materials
ASTM C408-88(2020) Standard Test Method for Thermal Conductivity of Whiteware Ceramics
ASTM D6744-01 Standard Test Method for Determination of the Thermal Conductivity of Anode Carbons by the Guarded Heat Flow Meter Technique
ASTM D5334-22 Standard Test Method for Determination of Thermal Conductivity of Soil and Rock by Thermal Needle Probe Procedure
ASTM D5334-22ae1 Standard Test Method for Determination of Thermal Conductivity of Soil and Rock by Thermal Needle Probe Procedure
ASTM D6744-06(2011)e1 Standard Test Method for Determination of the Thermal Conductivity of Anode Carbons by the Guarded Heat Flow Meter Technique
ASTM D6744-06 Standard Test Method for Determination of the Thermal Conductivity of Anode Carbons by the Guarded Heat Flow Meter Technique
ASTM D6744-06(2017)e1 Standard Test Method for Determination of the Thermal Conductivity of Anode Carbons by the Guarded Heat Flow Meter Technique
ASTM E1952-17 Standard Test Method for Thermal Conductivity and Thermal Diffusivity by Modulated Temperature Differential Scanning Calorimetry
ASTM C417-93(1998) Standard Test Method for Thermal Conductivity of Unfired Monolithic Refractories
ASTM C417-21 Standard Test Method for Thermal Conductivity of Unfired Monolithic Refractories
ASTM C417-05(2015) Standard Test Method for Thermal Conductivity of Unfired Monolithic Refractories
ASTM D6744-06(2011) Standard Test Method for Determination of the Thermal Conductivity of Anode Carbons by the Guarded Heat Flow Meter Technique
ASTM D5334-14 Standard Test Method for Determination of Thermal Conductivity of Soil and Soft Rock by Thermal Needle Probe Procedure
ASTM D3464-96(2007) Standard Test Method for Average Velocity in a Duct Using a Thermal Anemometer
ASTM C1113/C1113M-09(2019) Standard Test Method for Thermal Conductivity of Refractories by Hot Wire (Platinum Resistance Thermometer Technique)
ASTM E1952-01 Standard Test Method for Thermal Conductivity and Thermal Diffusivity by Modulated Temperature Differential Scanning Calorimetry
ASTM E1952-06 Standard Test Method for Thermal Conductivity and Thermal Diffusivity by Modulated Temperature Differential Scanning Calorimetry
ASTM E1952-98 Standard Test Method for Thermal Conductivity and Thermal Diffusivity by Modulated Temperature Differential Scanning Calorimetry
ASTM E516-95a(2013) Standard Practice for Testing Thermal Conductivity Detectors Used in Gas Chromatography
ASTM D1125-23 Standard Test Methods for Electrical Conductivity and Resistivity of Water
ASTM D6095-99 Standard Test Method for Volume Resistivity for Extruded Crosslinked and Thermoplastic Semiconducting Conductor and Insulation Shielding Materials
ASTM D6095-05 Standard Test Method for Volume Resistivity for Extruded Crosslinked and Thermoplastic Semiconducting Conductor and Insulation Shielding Materials
ASTM D5930-09 Standard Test Method for Thermal Conductivity of Plastics by Means of a Transient Line-Source Technique
ASTM D6095-06 Standard Test Method for Longitudinal Measurement of Volume Resistivity for Extruded Crosslinked and Thermoplastic Semiconducting Conductor and Insulation Shielding Materials
ASTM D6095-12 Standard Test Method for Longitudinal Measurement of Volume Resistivity for Extruded Crosslinked and Thermoplastic Semiconducting Conductor and Insulation Shielding Materials
ASTM D6095-12(2023) Standard Test Method for Longitudinal Measurement of Volume Resistivity for Extruded Crosslinked and Thermoplastic Semiconducting Conductor and Insulation Shielding Materials
ASTM C108-46(2009) Standard Symbols for Heat Transmission
ASTM C108-46(2013) Standard Symbols for Heat Transmission
ASTM D5568-14 Standard Test Method for Measuring Relative Complex Permittivity and Relative Magnetic Permeability of Solid Materials at Microwave Frequencies Using Waveguide
ASTM E1447-09(2016) Standard Test Method for Determination of Hydrogen in Titanium and Titanium Alloys by the Inert Gas Fusion Thermal Conductivity Method
ASTM D6095-12(2018) Standard Test Method for Longitudinal Measurement of Volume Resistivity for Extruded Crosslinked and Thermoplastic Semiconducting Conductor and Insulation Shielding Materials
ASTM C182-88(2004) Standard Test Method for Thermal Conductivity of Insulating Firebrick
ASTM D5391-23 Standard Test Method for Electrical Conductivity and Resistivity of a Flowing High Purity Water Sample

Institute of Interconnecting and Packaging Electronic Circuits (IPC), Tantalum thermal conductivity

IPC TM-650 2.4.50-1995 Thermal Conductivity, Polymer Films

ES-UNE, Tantalum thermal conductivity

UNE-EN ISO 22007-2:2023 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 2: Transient plane heat source (hot disc) method (ISO 22007-2:2022)
UNE-EN ISO 22007-1:2018 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 1: General principles (ISO 22007-1:2017)
UNE-ISO 9869-1:2023 Thermal insulation - Building elements - In-situ measurement of thermal resistance and thermal transmittance - Part 1: Heat flow meter method
UNE 136021:2019 Finite Element Calculation Method for the determination of the thermal transmittance of masonry built from clay masonry units.
UNE-EN ISO 17836:2018 Thermal spraying - Determination of the deposition efficiency for thermal spraying (ISO 17836:2017)
UNE-EN ISO 3915:2022 Plastics - Measurement of resistivity of conductive plastics (ISO 3915:2022)
UNE-EN 61580-8:1996 METHODS OF MEASUREMENT FOR WAVEGUIDES. PART 8: WAVEGUIDE POWER HOLDING CAPABILITY. (Endorsed by AENOR in December of 1996.)

American National Standards Institute （ANSI), Tantalum thermal conductivity

ISO/DIS 22007-1:2023 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 1: General principles
ANSI/TAPPI T252 om-2012 pH and electrical conductivity of hot water extracts of pulp, paper, and paperboard
ANSI/ASTM D5930:2001 Test Method for Thermal Conductivity of Plastics by Means of a Transient Line-Source Technique

Danish Standards Foundation, Tantalum thermal conductivity

DS/EN ISO 22007-1:2012 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 1: General principles
DS/ISO 11357-8:2021 Plastics – Differential scanning calorimetry (DSC) – Part 8: Determination of thermal conductivity
DS/EN ISO 11357-8:2021 Plastics – Differential scanning calorimetry (DSC) – Part 8: Determination of thermal conductivity (ISO 11357-8:2021)
DS/EN ISO 6946:2008 Building components and building elements - Thermal resistance and thermal transmittance - Calculation method
DS/EN 12428:2013 Industrial, commercial and garage doors - Thermal transmittance - Requirements for the calculation
DS/CEN/TS 1159-4:2004 Advanced technical ceramics - Ceramic composites - Thermophysical properties - Part 4: Determination of thermal conductivity
DS/EN ISO 12631:2012 Thermal performance of curtain walling - Calculation of thermal transmittance
DS/EN 27888:2003 Water quality - Determination of electrical conductivity (ISO 7888:1985)
DS/EN ISO 3915:1999 Plastics - Measurement of resistivity of conductive plastics
DS 469:1991 Dansk Ingeniorforening's Code of Practice for heating systems with water as heat conducting fluid

German Institute for Standardization, Tantalum thermal conductivity

DIN EN ISO 22007-1:2018-03 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 1: General principles (ISO 22007-1:2017); German version EN ISO 22007-1:2017
DIN 52613:1977 Thermal Insulation Testings; Determination of Thermal Conductivity by the Tube Method
DIN EN ISO 22007-6:2015 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 6: Comparative method for low thermal conductivities using a temperature-modulation technique (ISO 22007-6:2014); German version EN ISO 22007-6:2015
DIN EN ISO 22007-4:2023 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 4: Light flash method (ISO/DIS 22007-4:2023); German and English version prEN ISO 22007-4:2023
DIN EN ISO 22007-4:2023-03 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 4: Light flash method (ISO/DIS 22007-4:2023); German and English version prEN ISO 22007-4:2023 / Note: Date of issue 2023-02-03*Intended as replacement for DIN EN ISO 22007...
DIN EN ISO 22007-1:2023 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 1: General principles (ISO/DIS 22007-1:2023); German and English version prEN ISO 22007-1:2023
DIN EN ISO 22007-1:2023-04 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 1: General principles (ISO/DIS 22007-1:2023); German and English version prEN ISO 22007-1:2023 / Note: Date of issue 2023-03-10*Intended as replacement for DIN EN ISO 22007...
DIN EN 16813:2017-02 Thermal spraying - Measurement of the electrical conductivity of thermal sprayed non-iron metal coatings by means of eddy current method; German version EN 16813:2016
DIN EN ISO 22007-2:2022-09 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 2: Transient plane heat source (hot disc) method (ISO 22007-2:2022); German version EN ISO 22007-2:2022
DIN EN ISO 22007-4:2017-11 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 4: Laser flash method (ISO 22007-4:2017); German version EN ISO 22007-4:2017
DIN 52612-1:1979 Testing of Thermal Insulating Materials; Determination of Thermal Conductivity by the Guarded Hot Plate Apparatus; Test Procedure and Evaluation
DIN EN ISO 11357-8:2020 Plastics - Differential scanning calorimetry - Part 8: Determination of thermal conductivity (ISO/DIS 11357-8:2019); German and English version prEN ISO 11357-8:2019
DIN EN ISO 22007-3:2012-04 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 3: Temperature wave analysis method (ISO 22007-3:2008); German version EN ISO 22007-3:2012
DIN CEN ISO/TR 22007-5:2014-11*DIN SPEC 53367:2014-11 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 5: Results of interlaboratory testing of poly(methyl methacrylate) samples (ISO/TR 22007-5:2011); German version CEN ISO/TR 22007-5:2014
DIN EN 27888:1993 Water quality; determination of electrical conductivity (ISO 7888:1985); German version EN 27888:1993
DIN EN ISO 22007-3:2012 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 3: Temperature wave analysis method (ISO 22007-3:2008); German version EN ISO 22007-3:2012
DIN 53779:1979 Determination of the electric conductivity and the specific resistance (resistivity) of aqueous extracts
DIN 10753:2021 Analysis of honey - Determination of electrical conductivity
DIN EN ISO 12631:2018-01 Thermal performance of curtain walling - Calculation of thermal transmittance (ISO 12631:2017); German version EN ISO 12631:2017
DIN 10753:2021-06 Analysis of honey - Determination of electrical conductivity
DIN 51908:2022-10 Testing of carbonaceous materials - Determination of thermal conductivity at room temperature by means of a comparative method - Solid material
DIN EN 61788-11:2012 Superconductivity - Part 11: Residual resistance ratio measurement - Residual resistance ratio of Nb<(Index)3>Sn composite superconductors (IEC 61788-11:2011); German version EN 61788-11:2011
DIN EN ISO 17628:2015 Geotechnical investigation and testing - Geothermal testing - Determination of thermal conductivity of soil and rock using a borehole heat exchanger (ISO 17628:2015)
DIN EN 61788-4:2012 Superconductivity - Part 4: Residual resistance ratio measurement - Residual resistance ratio of Nb-Ti composite superconductors (IEC 61788-4:2011); German version EN 61788-4:2011
DIN EN 61788-4:2008 Superconductivity - Part 4: Residual resistance ratio measurement - Residual resistance ratio of Nb-Ti composite superconductors (IEC 61788-4:2007); German version EN 61788-4:2007
DIN EN 27888:1993-11 Water quality; determination of electrical conductivity (ISO 7888:1985); German version EN 27888:1993
DIN EN ISO 17836:2018-03 Thermal spraying - Determination of the deposition efficiency for thermal spraying (ISO 17836:2017); German version EN ISO 17836:2017
DIN EN ISO 17836:2005 Thermal spraying - Determination of the deposition efficiency for thermal spraying (ISO 17836:2004); German version EN ISO 17836:2004
DIN 51908:2006-05 Testing of carbon materials - Determination of thermal conductivity at room temperature by means of a comparative method - Solid material
DIN EN ISO 3915:1999 Plastics - Measurement of resistivity of conductive plastics (ISO 3915:1981); German version EN ISO 3915:1999
DIN EN ISO 3915:2022-05 Plastics - Measurement of resistivity of conductive plastics (ISO 3915:2022); German version EN ISO 3915:2022

RU-GOST R, Tantalum thermal conductivity

GOST R 50238-1992 Modified wood. Method for determination of heat conductivity
GOST 7076-1999 Building materials and products. Method of determination of steady-state thermal conductivity and thermal resistance
GOST 7076-1978 Building materials. Method of thermal conductivity determination
GOST 7076-1987 Building materials and products. Method of thermal conductivity determination
GOST 12.4.145-1984 Occupational safety standards system. Rubber for special shoes bottom. Method for determination of heat conduction
GOST R 8.722-2010 State system for ensuring the uniformity of measurements. Conductometric liquid analyses. Verification procedure
GOST 31770-2012 Honey. Method for determination of electroconductivity
GOST 21523.3-1987 Modified wood. Method for determination of thermal conductivity, heat conductivity and heat capacity

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Tantalum thermal conductivity

GB/T 15076.13-2017 Methods for chemical analysis of tantalum and niobium—Part 13: Determination of nitrogen content—Inert gas fusion thermal conductivity method

GOSTR, Tantalum thermal conductivity

GOST R 57943-2017 Plastics. Determination of thermal conductivity and thermal diffusivity. Part 4. Laser flash method
GOST R 57830-2017 Composites. Determination of thermal conductivity and thermal diffusivity by modulated temperature differential scanning calorimetry

SE-SIS, Tantalum thermal conductivity

SIS SS 02 42 11-1980 Thermal insulation — Determination of thermal resistance or thermal conductivity by means of a heat-flow meter

National Aeronautics and Space Administration (NASA), Tantalum thermal conductivity

NASA NACA-TN-3143-1954 Experimental determination of thermal conductivity of low-density ice
NASA-TR-R-132-1962 Estimated Viscosities and Thermal Conductivities of Gases at High Temperatures
NASA-CR-2440-1974 Viscosity and thermal conductivity coefficients of gaseous and liquid oxygen

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Tantalum thermal conductivity

ASHRAE 4521-2002 In Situ Measurement of Ground Thermal Conductivity: A Duch Perspective
ASHRAE 4360-2000 Thermal Conductivity of Cementitious Grouts and Impact on Heat Exchanger Length Design for Ground Source Heat Pumps (The Full Text of This Paper Can Be Found in the International Journal of Heating@ Ventilating@ Air-Conditioning and Refrigerating Research
ASHRAE AC-02-15-3-2002 Ground Thermal Conductivity Testing - Controlled Site Analysis
ASHRAE DA-00-10-2-2000 Generalized Model for Viscosity and Thermal Conductivity of Trifluoromethane (R-23) (RP-997)
ASHRAE DA-00-13-3-2000 Field Test of a New Method for Determining Soil Formation Thermal Conductivity and Borehole Resistance
ASHRAE 3727-1993 Electrical Conductivity of Pure Organic Liquids
ASHRAE SF-98-1-3-1998 Ground-Coupled Heat Pump Loop Design Using Thermal Conductivity Testing and the Effect of Different Backfill Materials on Vertical Bore Length
ASHRAE KC-03-1-5-2003 Effect of Airflow and Heat Input Rates on Duct Efficiency

The Aluminum Association, Tantalum thermal conductivity

AA RECA-1991 Report on Electrical Conductivity in Heat Treated Aluminum Alloy Plate

未注明发布机构, Tantalum thermal conductivity

DIN EN ISO 6946:2005 Components – thermal resistance and thermal transmittance – calculation method

CZ-CSN, Tantalum thermal conductivity

CSN 72 7010 Z1-1995
CSN 34 6319-1987 Testing of ceramic electrotechnic materials. Methods of the determination of medium specific heat, thermal conductivity and medium temperature conductivity
CSN 72 5032-1973 Testing of fired ceram,ic materials Determination of the specific thermal conductivity
CSN 72 7306-1987 Thermal insulation materials and pro- ducts. Determination of thermal conduc- tivity by the plate method
CSN 42 0475-1982 Metal testing. Determination of electric conductivity of metallurgical products
CSN 50 0332-1972 Paper sizing measurement by lectroconduotivity method

Professional Standard - Aviation, Tantalum thermal conductivity

HB 5400-1988 Rubber thermal conductivity test method transient hot wire method

Japanese Industrial Standards Committee (JISC), Tantalum thermal conductivity

JIS R 1611:1997 Test methods of thermal diffusivity, specific heat capacity, and thermal conductivity for fine ceramics by laser flash method
JIS R 1611:2010 Measurement methods of thermal diffusivity, specific heat capacity, and thermal conductivity for fine ceramics by flash method
JIS A 1413:1977 Standard method of test for thermal conductivity of heat insulating materials by means of the guarded hot plate
JIS K 0400-13-10:1999 Water quality -- Determination of electrical conductivity
JIS H 7312:2007 Superconductivity -- Residual resistance ratio measurement -- Residual resistance ratio of Nb3Sn composite superconductors
JIS R 2617:1985 Testing method for thermal expansion and shrinkage of insulating fire bricks
JIS A 1495:2022 Thermal insulation -- Building elements -- In-situ measurement of thermal resistance and thermal transmittance -- Infrared method for frame structure dwelling
JIS A 2105:2018 Thermal performance of curtain walling -- Calculation of thermal transmittance
JIS K 0130:2008 General rules for electrical conductivity measuring method
JIS H 0505:1975 Measuring methods for electrical resistivity and conductivity of non-ferrous materials
JIS K 0552:1994 Testing methods for electric conductivity in highly purified water
JIS A 1316:2022 Test method using cone calorimeter measuring heat release rate and smoke production rate for building materials

CO-ICONTEC, Tantalum thermal conductivity

ICONTEC 3223-1991

Lithuanian Standards Office , Tantalum thermal conductivity

LST EN ISO 22007-1:2012 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 1: General principles (ISO 22007-1:2009)
LST EN ISO 22007-4:2012 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 4: Laser flash method (ISO 22007-4:2008)
LST EN ISO 11357-8:2021 Plastics - Differential scanning calorimetry (DSC) - Part 8: Determination of thermal conductivity (ISO 11357-8:2021)
LST EN 12428-2002 Industrial, commercial and garage doors and gates - Thermal transmittance - Requirements for the calculation
LST EN 27888-1999 Water quality - Determination of electrical conductivity (ISO 7888:1985)
LST EN ISO 12631:2013 Thermal performance of curtain walling - Calculation of thermal transmittance (ISO 12631:2012)

AENOR, Tantalum thermal conductivity

UNE-EN ISO 22007-1:2012 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 1: General principles (ISO 22007-1:2009)
UNE-EN 16813:2017 Thermal spraying - Measurement of the electrical conductivity of thermal sprayed non-iron metal coatings by means of eddy current method
UNE-EN 12428:2014 Industrial, commercial and garage doors - Thermal transmittance - Requirements for the calculation
UNE-ISO 1853:2012 Conducting and dissipative rubbers, vulcanised or thermoplastic. Measurement of resistivity
UNE-EN ISO 17628:2017 Geotechnical investigation and testing - Geothermal testing - Determination of thermal conductivity of soil and rock using a borehole heat exchanger (ISO 17628:2015)
UNE 77308:2001 Soil quality. Determination of the specific electrical conductivity.
UNE-EN 27888:1994 WATER QUALITY. DETERMINATION OF ELECTRICAL CONDUCTIVITY. (ISO 7888:1985).

Indonesia Standards, Tantalum thermal conductivity

SNI ISO 8894-2:2010 Refractory materials - Determination of thermal conductivity - Part 2: Hot-wire methods (parallel)
SNI ISO 1853:2014 Conducting and dissipative rubbers, vulcanized or thermoplastic — Measurement of resistivity

KR-KS, Tantalum thermal conductivity

KS L ISO 8894-2-2022 Refractory materials — Determination of thermal conductivity — Part 2: Hot-wire method(parallel)
KS L ISO 8894-2-2016 Refractory materials-Determination of thermal conductivity-Part2:Hot-wire methods(parallel)
KS M ISO 1853-2018 Conducting and dissipative rubbers, vulcanized or thermoplastic — Measurement of resistivity
KS L ISO 8894-1-2022 Refractory materials — Determination of thermal conductivity — Part 1: Hot-wire methods(cross-array and resistance thermometer)
KS C 3001-1983(2023)
KS I ISO 11265-2021 Soil quality — Determination of the specific electrical conductivity

Sichuan Provincial Standard of the People's Republic of China, Tantalum thermal conductivity

DB51/T 2434-2017 Transient Measurement of Material Thermal Conductivity and Thermal Diffusivity—Pulse Method

Military Standard of the People's Republic of China-General Armament Department, Tantalum thermal conductivity

GJB 10252-2021 Test method for high-temperature steady-state thermal conductivity of thermal insulation materials
GJB 329-1987 Test method for medium-temperature steady-state thermal conductivity of thermal insulation materials
GJB 328-1987 Test method for low-temperature steady-state thermal conductivity of thermal insulation materials
GJB/J 5128-2002 Specification for reference materials for thermal conductivity, specific heat, and coefficient of linear expansion for use in explosives
GJB 63/1B-2011 Detail specification for type CAK solid electrolytic tantalum capacitor with established reliability
GJB 733/1-2011 Detail specification for established reliability nonsolid electrolytic tantalum capacitors,type CAK35
GJB 733B-2011 General specification for nonsolid-electrolyte fixed tantalum capacitors with established reliability
GJB 733/2-2011 Detail specification for established reliability nonsolid electrolytic tantalum capacitors,type CAK38
GJB 733/3-2011 Detail specification for non-solid electrolytic tantalum capacitors with failure rate ratings, type CAK39
GJB 2283/1-2011 Detail specification for established reliability chip solid electrolytic tantalum capacitors,type CAK45
GJB 8683.9-2015 Test methods for physical parameters of pyrotechnics Part 9: Determination of thermal conductivity using guarded hot plate method
GJB 8683.10-2015 Test methods for physical parameters of pyrotechnics Part 10: Determination of thermal conductivity by differential scanning calorimetry
GJB 937-1990 Method for measuring magnetic permeability of weakly magnetic materials

BELST, Tantalum thermal conductivity

STB 1618-2006 Building materials and products. Method of determination of steady - state thermal conductivity

IT-UNI, Tantalum thermal conductivity

UNI EN ISO 11357-8:2021 Plastics - Differential scanning calorimetry (DSC) - Part 8: Determination of thermal conductivity

Taiwan Provincial Standard of the People's Republic of China, Tantalum thermal conductivity

CNS 13984-1997 Methods of test for thermal diffusivity,specific heat capacity,and thermal conductivity of fine ceramics by laser flash method

API - American Petroleum Institute, Tantalum thermal conductivity

API TDB CHAPTER 12-1976 Technical Data Book Chapter 12 - Thermal Conductivity
API TDB CHAPTER 12-1992 Technical Data Book Chapter 12 - Thermal Conductivity (Fifth Edition)

Group Standards of the People's Republic of China, Tantalum thermal conductivity

T/CNIA 0169-2022 High thermal conductivity aluminum alloy die castings for heating radiators
T/IAWBS 009-2019 High Voltage Bias Steady-state Temperature Humidity Test for Power Semiconductor Devices
T/CEC 399.3-2020 Specifications for metal-based bulk conductors Part 3: Steel-core high-conductivity heat-resistant aluminum alloy conductors
T/CASAS 020-2021 Test method for thermal conductivity of micro-nano sintered compact: laser flash method
T/GDASE 0011-2020 Determination of conductivity of graphene powder
T/GDASE 0006-2020 Determination for thermal emissivity and thermal conductivity of heat dissipation film

AT-ON, Tantalum thermal conductivity

ONORM B 6015 Teil.5-1990 Determination of thermal conductivity by the guarded hot plate apparatus; determination of the nominal value of the thermal conductivity for insulation materials
ONORM B 6015-2-2000 Determination of thermal conductivity by the guarded hot plate apparatus - Determination of the specific thermal conductivity in building materials
ONORM B 6015-6-1992 Determination of thermal conductivity by the guarded hot plate apparatus - Determination of the nominal value of the thermal conductivity for mineralic building materials
OENORM EN ISO 11357-8:2021 Plastics - Differential scanning calorimetry (DSC) - Part 8: Determination of thermal conductivity (ISO 11357-8:2021)
ONORM M 7714-1995 Covered solar collectors - Collector efficiency, effective thermal capacity and pressure drop - Test specifications
ONORM EN 27888-1993 Water quality. Determination of electrical conductivity (ISO 7888:1985)
ONORM M 7512-1978 Heat rating of room heaters; plate radiators made of steel

Society of Automotive Engineers (SAE), Tantalum thermal conductivity

SAE AMS2658-1980 HARDNESS AND CONDUCTIVITY INSPECTION OF HEAT TREATED ALUMINUM ALLOY PARTS
SAE J2302-1996 Thermal Effectiveness of Sleeve Insulation
SAE J2495-2011 Thermal Containment Efficiency of Sleeve Materials (Stabilized Type)
SAE J2495-1999 Thermal Containment Efficiency of Sleeve Materials
SAE J2495-2008 Thermal Containment Efficiency of Sleeve Materials

Professional Standard - Water Conservancy, Tantalum thermal conductivity

SL 78-1994 Determination of conductivity (Conductivity instrument method)

CH-SNV, Tantalum thermal conductivity

SN EN ISO 11357-8:2021 Plastics - Differential scanning calorimetry (DSC) - Part 8: Determination of thermal conductivity (ISO 11357-8:2021)

PL-PKN, Tantalum thermal conductivity

PN-EN ISO 11357-8-2021-08 E Plastics--Differential scanning calorimetry (DSC)--Part 8: Determination of thermal conductivity (ISO 11357-8:2021)
PN C82055-11-1989 Test methods of pressed carbon products Determination of thermal specific conductivity with comparative method

ZA-SANS, Tantalum thermal conductivity

SANS 6240:2002 Electric conductivity of fine aggregate
SANS 6240:2008 Electric conductivity of fine aggregate
SANS 11853:2003 Conducting and dissipative rubbers, vulcanized or thermoplastic - Measurement of resistivity

CEN - European Committee for Standardization, Tantalum thermal conductivity

CEN ISO/TR 22007-5:2014 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 5: Results of interlaboratory testing of poly(methyl methacrylate) samples
EN 13947:2006 Thermal performance of curtain walling - Calculation of thermal transmittance

Professional Standard - Electron, Tantalum thermal conductivity

SJ 2857.1-1988 Methods for measurement of thermoelectric refrigeration materials properties--Methods for measurement of thermal conductivity

Standard Association of Australia （SAA）, Tantalum thermal conductivity

AS 1774.14:1992 Refractories and refractory materials - Physical test methods - Thermal conductivity
AS 1774.14:2008
AS 3758:1990 Guide to the evaluation of the effectiveness of fire retardants

ECIA - Electronic Components Industry Association, Tantalum thermal conductivity

535AAAB-1987 Fixed Tantalum Capacitors with Solid Electrolyte and Porous Anode with Wire Lead Terminals

VN-TCVN, Tantalum thermal conductivity

TCVN 6650-2000 Soil quality.Determination of the specific electrical conductivity

International Federation of Trucks and Engines, Tantalum thermal conductivity

NAVISTAR CEMS GT-18-2015 VOID - Dry Film Conductivity Of A Primer

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, Tantalum thermal conductivity

GJB 5382.9-2005 Test methods of physical parameter for pyrotechnic. Part 9: Determination of thermal conductivity. Guarded hot plate mehtod
GJB 5382.10-2005 Test methods of physical parameter for pyrotechnic. Part 10: Determination of thermal conductivity. DSC method

European Committee for Electrotechnical Standardization（CENELEC）, Tantalum thermal conductivity

EN 61788-5:2013 Superconductivity - Part 5: Matrix to superconductor volume ratio measurement - Copper to superconductor volume ratio of Cu/Nb-Ti composite superconducting wires
EN 61788-5:2001 Superconductivity Part 5: Matrix to superconductor volume ratio measurement - Copper to superconductor volume ratio of Cu/Nb-Ti composite superconductors
EN 61788-11:2011 Superconductivity - Part 11: Residual resistance ratio measurement - Residual resistance ratio of Nb3Sn composite superconductors
EN 61788-4:2011 Superconductivity - Part 4: Residual resistance ratio measurement - Residual resistance ratio of Nb-Ti composite superconductor
EN 61788-4:2016 Superconductivity - Part 4: Residual resistance ratio measurement - Residual resistance ratio of Nb-Ti and Nb3Sn composite superconductors

Professional Standard - Non-ferrous Metal, Tantalum thermal conductivity

YS/T 63.3-2006 Carbonaceous materials used in the production of aluminium-Part 3:Determination of the thermal conductivity using a comparative method

工业和信息化部, Tantalum thermal conductivity

YS/T 63.3-2016 Testing methods for carbon materials for aluminum use Part 3: Comparative method for determination of thermal conductivity

Professional Standard - Energy, Tantalum thermal conductivity

NB/T 10973-2022 Guidelines for calculating power generation and power consumption rate of solar thermal power plants

International Electrotechnical Commission (IEC), Tantalum thermal conductivity

IEC 61788-14:2010 Superconductivity - Part 14: Superconducting power devices - General requirements for characteristic tests of current leads designed for powering superconducting devices
IEC 61788-11:2011 Superconductivity - Part 11: Residual resistance ratio measurement - Residual resistance ratio of Nb<(Index)3>Sn composite superconductors
IEC 61788-4:2007 Superconductivity - Part 4: Residual resistance ratio measurement - Residual resistance ratio of Nb-Ti composite superconductors
IEC 61788-4:2011 Superconductivity - Part 4: Residual resistance ratio measurement - Residual resistance ratio of Nb-Ti composite superconductors
IEC 61788-4:2001 Superconductivity - Part 4: Residual resistance ratio measurement; Residual resistance ratio of Nb-Ti composite superconductors
IEC 61788-4:2016 Superconductivity - Part 4: Residual resistance ratio measurement - Residual resistance ratio of Nb-Ti and Nb3Sn composite superconductors
IEC 61788-11:2003 Superconductivity - Part 11: Residual resistance ratio measurement; Residual resistance ratio of Nb<(Index)3>Sn composite superconductors
IEC TR 63378-1:2021 Thermal standardization on semiconductor packages - Part 1: Thermal resistance and thermal parameter of BGA, QFP type semiconductor packages

BE-NBN, Tantalum thermal conductivity

NBN B 62-200-1978

UY-UNIT, Tantalum thermal conductivity

UNIT 119-1957

BR-ABNT, Tantalum thermal conductivity

ABNT NBR 10547 Versão Corrigida-2012 Fuel ethanol - Determination of electrical conductivity

CEPT - Conference Europeenne des Administrations des Postes et des Telecommunications, Tantalum thermal conductivity

CEPT T/TR 02-08 E-1986 Conductivity of Floors in Telecommunication Centres
CEPT T/TR 02-08-1986 Conductivite Des Sols Dans Les Centres De Telecommunications

(U.S.) Joint Electron Device Engineering Council Soild State Technology Association, Tantalum thermal conductivity

JEDEC JESD313B-1975 Conduction Cooled Power Transistors, Thermal Resistance Measurements of Revision of EIA-313-B formerly RS-313-B

HU-MSZT, Tantalum thermal conductivity

MSZ 151/1-1986

SAE - SAE International, Tantalum thermal conductivity

SAE J2302-2017 Thermal Effectiveness of Sleeve Insulation

American Society of Civil Engineers (ASCE), Tantalum thermal conductivity

ASCE 50-08/51-08-2008 Standard Guideline for Fitting Saturated Hydraulic Conductivity Using Probability Density Functions; Standard Guideline for Calculating the Effective Saturated Hydraulic Conductivity

International Telecommunication Union (ITU), Tantalum thermal conductivity

ITU-R OPINION 91-1-1997 World Atlas of Ground Conductivities
ITU-R P.832-2-1999 World Atlas of Ground Conductivities
ITU-R OPINION 91-2-2007 World Atlas of Ground Conductivities
ITU-R P.832-3-2012 World atlas of ground conductivities

VE-FONDONORMA, Tantalum thermal conductivity

NORVEN 24-22-1964

TR-TSE, Tantalum thermal conductivity

TS 209-1965 RESISTIVITY OF COMMERCIAL HARD-DRAVVN ALUMINIUM ELECTRICAL CONDUCTOR WIRE

American Petroleum Institute (API), Tantalum thermal conductivity

API RP 19D-2021 Measuring the Long-term Conductivity of Proppants

NL-NEN, Tantalum thermal conductivity

NEN-ISO 7888:1994 Water quality.Determination of electrical conductivity(ISO 7888:1985)

Professional Standard - Environmental Protection, Tantalum thermal conductivity

HJ 802-2016 Soil quality—Determination of conductivity- Electrode method

CENELEC - European Committee for Electrotechnical Standardization, Tantalum thermal conductivity

EN 61788-11:2003 Superconductivity Part 11: Residual resistance ratio measurement - Residual resistance ratio of Nb3Sn composite superconductors
EN 61788-4:2001 Superconductivity Part 4: Residual resistance ratio measurement - Residual resistance ratio of Nb-Ti composite superconductors
EN 61788-4:2007 Superconductivity - Part 4: Residual resistance ratio measurement - Residual resistance ratio of Nb-Ti composite superconductors

Professional Standard - Agriculture, Tantalum thermal conductivity

NY/T 1599-2008 Determination of heat damaged kernel of soybean

CL-INN, Tantalum thermal conductivity

INDITECNOR 62-8

ES-AENOR, Tantalum thermal conductivity

GM North America, Tantalum thermal conductivity

GM GM9523P-1988 Conductivity Test of Coated Plastic Parts