ZH
RU
ES

Heat capacity of tantalum

Heat capacity of tantalum, Total:499 items.

In the international standard classification, Heat capacity of tantalum involves: Resistors, Capacitors, Testing of metals, Non-ferrous metals, Petroleum products in general, Thermodynamics and temperature measurements, Burners. Boilers, Installations in buildings, Fluid storage devices, Wood, sawlogs and sawn timber, Plastics, Solar energy engineering, Electrical engineering in general, Electrical wires and cables, Ventilators. Fans. Air-conditioners, Glass, Packaging and distribution of goods in general, Bottles. Pots. Jars, Fasteners for aerospace construction, Fruits. Vegetables, General methods of tests and analysis for food products, Rubber and plastics products, Heat pumps, Semiconducting materials, Ceramics, Analytical chemistry, Iron and steel products, Aircraft and space vehicles in general, Protection of and in buildings, Heat recovery. Thermal insulation, Freight distribution of goods, Power transmission and distribution networks.

Defense Logistics Agency, Heat capacity of tantalum

DLA DSCC-DWG-02002 REV B-2007 CAPACITORS, FIXED, TANTALUM, CHIP
DLA DSCC-DWG-06014 REV B-2012 CAPACITORS, FIXED, ELECTROLYTIC (NONSOLID ELECTROLYTE), TANTALUM
DLA DSCC-DWG-06015 REV B-2012 CAPACITORS, FIXED, ELECTROLYTIC (NONSOLID ELECTROLYTE), TANTALUM
DLA DSCC-DWG-04002-2004 CAPACITORS, TANTALUM, HYBRID, POLYMER CASE, SEALED
DLA DSCC-DWG-07016-2007 CAPACITOR, FIXED, TANTALUM CHIP, WEIBULL GRADED, LOW ESR
DLA DSCC-DWG-06013 REV A-2006 CAPACITORS, FIXED, ELECTROLYTIC (NONSOLID ELECTROLYTE), TANTALUM
DLA DSCC-DWG-06014 REV A-2006 CAPACITORS, FIXED, ELECTROLYTIC (NONSOLID ELECTROLYTE), TANTALUM
DLA DSCC-DWG-06015 REV A-2006 CAPACITORS, FIXED, ELECTROLYTIC (NONSOLID ELECTROLYTE), TANTALUM
DLA DSCC-DWG-06016 REV A-2006 CAPACITORS, FIXED, ELECTROLYTIC (NONSOLID ELECTROLYTE), TANTALUM
DLA QPL-39003-2011 Capacitors, Fixed, Electrolytic (Solid Electrolyte), Tantalum, Established Reliability, General Specification for
DLA QPL-39003-2013 Capacitors, Fixed, Electrolytic (Solid Electrolyte), Tantalum, Established Reliability, General Specification for
DLA MIL-PRF-39003 L SUPP 1-2006 CAPACITORS, FIXED, ELECTROLYTIC (SOLID ELECTROLYTE), TANTALUM ESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR
DLA MIL-PRF-39003 L-2006 CAPACITORS, FIXED, ELECTROLYTIC (SOLID ELECTROLYTE), TANTALUM ESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR
DLA MIL-PRF-39006 G SUPP 1-2006 CAPACITORS, FIXED, ELECTROLYTIC (NONSOLID ELECTROLYTE), TANTALUM, ESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR
DLA MIL-PRF-39006 G-2006 CAPACITORS, FIXED, ELECTROLYTIC (NONSOLID ELECTROLYTE), TANTALUM, ESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR
DLA MIL-PRF-39003 L (1)-2008 CAPACITORS, FIXED, ELECTROLYTIC (SOLID ELECTROLYTE), TANTALUM, ESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR
DLA MIL-PRF-39003 M-2009 CAPACITORS, FIXED, ELECTROLYTIC (SOLID ELECTROLYTE), TANTALUM, ESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR
DLA MIL-PRF-39003 M (2)-2011 CAPACITORS, FIXED, ELECTROLYTIC (SOLID ELECTROLYTE), TANTALUM, ESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR
DLA MIL-PRF-39003 M (3)-2011 CAPACITORS, FIXED, ELECTROLYTIC (SOLID ELECTROLYTE), TANTALUM, ESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR
DLA QPL-39006-QPD-2010 Capacitor, Fixed, Electrolytic (Nonsolid Electrolyte), Tantalum, Established Reliability, General Specification for
DLA QPL-39006-QPD-2012 Capacitor, Fixed, Electrolytic (Nonsolid Electrolyte), Tantalum, Established Reliability, General Specification for
DLA QPL-39006-2012 Capacitor, Fixed, Electrolytic (Nonsolid Electrolyte), Tantalum, Established Reliability, General Specification for
DLA QPL-39006-2013 Capacitor, Fixed, Electrolytic (Nonsolid Electrolyte), Tantalum, Established Reliability, General Specification for
DLA QPL-39003-92 NOTICE 1-2008 Capacitors, Fixed, Electrolytic (Solid Electrolyte) Tantalum, Established Reliability, General Specification for
DLA QPL-39006-116 NOTICE 1-2008 Capacitor, Fixed, Electrolytic (Nonsolid Electrolyte), Tantalum, Established Reliability, General Specification for
DLA A-A-52193 F-2008 FOOD CONTAINER, INSULATED, WITH INSERTS
DLA MIL-PRF-39003/10 D-2009 CAPACITORS, FIXED, ELECTROLYTIC (SOLID ELECTROLYTE), TANTALUM, (POLARIZED, SINTERED SLUG), ESTABLISHED RELIABILITY, STYLES CSS13 AND CSS33 (HIGH RELIABILITY APPLICATIONS)
DLA MIL-PRF-39003/10 D (1)-2010 CAPACITORS, FIXED, ELECTROLYTIC (SOLID ELECTROLYTE), TANTALUM, (POLARIZED, SINTERED SLUG), ESTABLISHED RELIABILITY, STYLES CSS13 AND CSS33 (HIGH RELIABILITY APPLICATIONS)
DLA MIL-PRF-39006/31 C-2011 CAPACITORS, FIXED, ELECTROLYTIC (NONSOLID ELECTROLYTE), TANTALUM, (POLARIZED, SINTERED SLUG), (EXTENDED RANGE), 85癈 (VOLTAGE DERATED TO 125癈), ESTABLISHED RELIABILITY, STYLE CLR91
DLA MIL-PRF-39006/25 E-2012 CAPACITORS, FIXED, ELECTROLYTIC (NONSOLID ELECTROLYTE), TANTALUM, (POLARIZED, SINTERED SLUG), (EXTENDED RANGE) 85癈 (VOLTAGE DERATED TO 125癈), ESTABLISHED RELIABILITY, STYLE CLR81

Association Francaise de Normalisation, Heat capacity of tantalum

NF C83-113/A1*NF EN 130800/A1:2006 Sectional Specification : tantalum surface mounting capacitors
NF C83-114*NF EN 130801:2006 Blank Detail Specification : tantalum surface mounting capacitors
NF C83-112-200*NF EN 130200:2015 Sectional specification : fixed tantalum capacitors with non-solid or solid electrolyte
NF C83-112-200/A3*NF EN 130200/A3:2015 Sectional specification : fixed tantalum capacitors with non-solid or solid electrolyte
NF C83-112/A2:1991 Electronic Components Tantalum capacitors with solid and non-solid electrolyte porous anode
NF C93-112-15*NF EN 60384-15:2017 Fixed capacitors for use in electronic equipment - Part 15 : sectional specification : Fixed tantalum capacitors with non-solid or solid electrolyte
NF EN 130201/A2:2015 Spécification particulière-cadre : condensateurs fixes au tantale à électrolyte solide, à anode poreuse (sous-famille 3)
NF EN 130201:2015 Spécification particulière-cadre : condensateurs fixes au tantale à électrolyte solide, à anode poreuse (sous-famille 3)
NF C83-112-201*NF EN 130201:2015 Blank Detail Specification : fixed tantalum capacitors with solid electrolyte, porous anode (sub-family 3)
NF C83-112-201/A2*NF EN 130201/A2:2015 Blank Detail Specification : fixed tantalum capacitors with solid electrolyte, porous anode (sub-family 3)
NF EN 60384-3:2016 Condensateurs fixes utilisés dans les équipements électroniques - Partie 3 : Spécification intermédiaire : Condensateurs fixes électrolytiques au tantale pour montage en surface, à électrolyte solide (MnO2)
NF C93-112-3:2008 Fixed capacitors for use in electronic equipment - Part 3 : sectional specification : surface mount fixed tantalum electrolytic capacitors with manganese dioxide solid electrolyte.
NF EN 12546-1:2000 Matériaux et objets en contact avec les denrées alimentaires - Récipients isolants à usage domestique - Partie 1 : spécifications concernant les récipients isolants, bouteilles et carafes isolantes
NF C93-112-24*NF EN IEC 60384-24:2021 Fixed capacitors for use in electronic equipment - Part 24 : sectional specification - Fixed tantalum electrolytic surface mount capacitors with conductive polymer solid electrolyte
NF C93-112-3*NF EN 60384-3:2016 Fixed capacitors for use in electronic equipment - Part 3: Sectional specification: Surface mount fixed tantalum electrolytic capacitors with manganese dioxide solid (MnO2) electrolyte
NF P50-103:1988 Solar energy. Hot water tanks heated by heat transfer fluids. Vocabulary.
NF C93-112-24*NF EN 60384-24:2006 Fixed capacitors for use in electronic equipment - Part 24 : sectional specification - Surface mount fixed tantalum electrolytic capacitors with conductive polymer solid electrolyte
NF C93-112-24*NF EN 60384-24:2015 Fixed capacitors for use in electronic equipment - Part 24 : Sectional specification - Fixed tantalum electrolytic surface mount capacitors with conductive polymer solid electrolyte
NF C73-223:1983 Heating Household Appliances Water heaters with a partial capacity electrically heated Performance Requirements
NF EN 60384-3-1:2008 Condensateurs fixes utilisés dans les équipements électroniques - Partie 3-1 : spécification particulière cadre : condensateurs fixes électrolytiques au tantale pour montage en surface, à électrolyte solide au dioxyde de manganèse - Niveau d'...
NF V08-406*NF ISO 11289:1993 Heat-processed foods in hermetically sealed containers. Determination of ph.
NF EN ISO 19628:2021 Céramiques techniques - Propriétés thermophysiques des composites céramiques - Détermination de la capacité thermique spécifique
NF T51-507-4:2013 Plastics - Differential scanning calorimetry (DSC) - Part 4: determination of specific heat capacity
NF T51-507-4:2014 Plastics - Differential scanning calorimetry (DSC) - Part 4 : determination of specific heat capacity
NF T51-507-4:2021 Plastics - Differential scanning calorimetry (DSC) - Part 4 : determination of specific heat capacity
NF C93-112-24-1*NF EN 60384-24-1:2006 Fixed capacitors for use in electronic equipment - Part 24-1 : blank detail specification - Surface mount fixed tantalum electrolytic capacitors with conductive polymer solid electrolyte - Assessment level EZ
NF EN 60384-24-1:2006 Condensateurs fixes utilisés dans les équipements électroniques - Partie 24-1 : spécification particulière cadre - Condensateurs fixes électrolytiques au tantale pour montage en surface à électrolyte solide en polymère conducteur - Niveau d'a...
NF E86-510-2*NF EN ISO 21029-2:2015 Cryogenic vessels - Transportable vacuum insulated vessels of not more than 1 000 litres volume - Part 2 : operational requirements
NF C93-112-3-1*NF EN 60384-3-1:2008 Fixed capacitors for use in electronic equipment - Part 3-1 : blank detail specification : surface mount fixed tantalum electrolytic capacitors with manganese dioxide solid electrolyte - Assessment level EZ
NF E86-303:1989 Industrial plants. Thermal insulation of tanks. Coating support.
FD P78-466-1:2021 Glass in building - Content of glazing thermal calculation notes
NF E86-501-3*NF EN 14398-3:2004 Cryogenic vessels - Large transportable non-vacuum insulated vessels - Part 3 : operational requirements
NF E86-501-1*NF EN 14398-1:2004 Cryogenic vessels - Large transportable non-vacuum insulated vessels - Part 1 : fundamental requirements
NF EN 12546-2:2000 Matériaux et objets en contact avec les denrées alimentaires - Récipients isolants à usage domestique - Partie 2 : spécification pour les sacs et boîtes isolants
NF E86-500-2*NF EN 1251-2:2000 Cryogenic vessels - Transportable vacuum insulated vessels of not more than 1000 litres volume - Part 2 : design, fabrication, inspection and testing
NF EN 1251-2:2000 Récipients cryogéniques - Récipients transportables, isolés sous vide, d'un volume n'excédant pas 1000 litres - Partie 2 : conception, fabrication, inspection et essai
NF B41-215*NF EN 821-3:2005 Advanced technical ceramics - Monolithic ceramics - Thermophysical properties - Part 3 : determination of specific heat capacity

Korean Agency for Technology and Standards (KATS), Heat capacity of tantalum

KS C 5215-2002 RELIABILITY ASSURED SOLID TANTALUM CAPACITORS
KS C 5108-2002 TANTALUM SOLID ELECTROLYTE CAPACITORS FOR ELECTRONIC EQUIPMENT
KS C 5108-1999 TANTALUM SOLID ELECTROLYTE CAPACITORS FOR ELECTRONIC EQUIPMENT
KS C 5215-1981 RELIABILITY ASSURED SOLID TANTALUM CAPACITORS
KS C 5108-1984 TANTALUM SOLID ELECTROLYTE CAPACITORS FOR ELECTRONIC EQUIPMENT
KS C IEC 60384-24:2009 Fixed capacitors for use in electronic equipment－Part 24：Sectional specification－Surface mount fixed tantalum electrolytic capacitors with conductive polymer solid electrolyte
KS C IEC 60384-3:2018 Fixed capacitors for use in electronic equipment — Part 3: Sectional specification — Surface mount fixed tantalum electrolytic capacitors with manganese dioxide solid electrolyte
KS M 3049-2011(2013) Testing methods for specific heat capacity of plastics
KS H ISO 11289:2007 Heat-processed foods in hermetically sealed containers－Determination of pH
KS M ISO 11357-4-2016(2021) Plastics－Differential scanning calorimetry(DSC)－Part 4：Determination of specific heat capacity
KS C IEC 60384-24-1:2009 Fixed capacitors for use in electronic equipment-Part 24-1:Blank detail specification-Surface mount fixed tantalum electrolytic capacitors with conductive polymer solid electrolyte-Assessment level EZ
KS C 6384-3101-2013 Fixed capacitors for use in electronic equipment－Part 3：Detail specification：Fixed tantalum chip capacitors for surface mountingwith solid electrolyte and porous anode, style I. Assessment level E
KS B ISO 21029-2-2017(2022) Cryogenic vessels — Transportable vacuum insulated vessels of not more than 1 000 litres volume — Part 2: Operational requirements
KS W 0680-2008(2013) Space-systems performance and quality assessment-general thermal space radiator
KS C IEC 60949:2004 Calculation of thermally permissible short-circuit currents, taking into account non-adiabatic heating effects
KS H ISO 11289-2007(2021) Heat-processed foods in hermetically sealed containers－Determination of pH
KS H ISO 11289-2007(2012) Heat-processed foods in hermetically sealed containers－Determination of pH
KS T ISO 8058-2004(2014) Thermal efficiency requirements of insulated containers for air cargo
KS L 1604-2017 Fine ceramics－Determination of thermal diffusivity, specific heat capacity,and thermal conductivity of monolithic ceramics by laser flash method
KS L 1604-2017(2022) Fine ceramics－Determination of thermal diffusivity, specific heat capacity,and thermal conductivity of monolithic ceramics by laser flash method
KS B ISO 21029-2:2017 Cryogenic vessels — Transportable vacuum insulated vessels of not more than 1 000 litres volume — Part 2: Operational requirements

GB-REG, Heat capacity of tantalum

REG NASA-LLIS-0981--2000 Lessons Learned ?Reverse Polarity Concerns With Tantalum Capacitors

American National Standards Institute （ANSI), Heat capacity of tantalum

ANSI/EIA 535BAAC-A:1998 Fixed Tantalum Chip Capacitor Style 1 Protected – Standard Capacitance Range
ANSI Z21.11.2-2011 Standard for Gas-Fired Room Heaters, Volume II, Unvented Room Heaters
ANSI Z21.11.2b-2004 Gas-Fired Room Heaters, Vol. II, Unvented Room Heaters

ECIA - Electronic Components Industry Association, Heat capacity of tantalum

535BAAB-1987 Fixed Tantalum Chip Capacitor Style 1 Protected - Extended Capacitance Range
535BAAA-1987 Fixed Tantalum Chip Capacitor Style 1 Protected-Standard Capacitance Range
EIA-757-A-2015 Visual and Mechanical Inspection for Molded SMT Solid Tantalum Capacitors
IS-757-1998 Visual and Mechanical Inspection for Molded SMT Solid Tantalum Capacitors
535ACAA-1987 Fixed Tantalum Capacitors with Non-Solid Electrolyte and Foil Electrode
535ACAD-1987 Fixed Tantalum Capacitors with Non-Solid Electrolyte and Foil Electrode
535ACAC-1987 Fixed Tantalum Capacitors with Non-Solid Electrolyte and Foil Electrode
535ACAB-1987 Fixed Tantalum Capacitors with Non-Solid Electrolyte and Foil Electrode
535BAAD-1991 Fixed Tantalum Chip Capacitor Style 1 Protected - Extended Capacitance Range (Replaces IS-29-86)
535ABAD-1987 Fixed Tantalum Capacitors with Non-Solid Electrolyte and Porous Anode
535ABAC-1987 Fixed Tantalum Capacitors with Non-Solid Electrolyte and Porous Anode
535ABAA-1987 Fixed Tantalum Capacitors with Non-Solid Electrolyte and Porous Anode
535ABAB-1987 Fixed Tantalum Capacitors with Non-Solid Electrolyte and Porous Anode
535AAAB-1987 Fixed Tantalum Capacitors with Solid Electrolyte and Porous Anode with Wire Lead Terminals
535AAAC-1987 Fixed Tantalum Capacitors with Solid Electrolyte and Porous Anode with Radial Leads
535AAAD-1987 Fixed Tantalum Capacitors with Solid Electrolyte and Porous Anode with Wire Lead Terminals Polar@ Axial Leaded@ Molded@ Non-Hermetically Sealed
EIA-60384-3-2017 Fixed Capacitors for Use in Electronic Equipment - Part 3: Sectional Specification: Surface Mount Fixed Tantalum Electrolytic Capacitors with Manganese Dioxide Solid Electrolyte
EIA-60384-24-2017 Fixed Capacitors for Use in Electronic Equipment - Part 24: Sectional Specification - Fixed Tantalum Electrolytic Surface Mount Capacitors with Conductive Polymer Solid Electrolyte
EIA-60384-24-2014 Fixed Capacitors for Use in Electronic Equipment – Part 24: Sectional Specification – Surface Mount Fixed Tantalum Electrolytic Capacitors with Conductive Polymer Solid Electrolyte
535AAAA-1987 Fixed Tantalum Capacitors with Solid Electrolyte and Porous Anode with Wire Lead Terminals Hermetically Sealed@ Axial Lead@ Polarized@ Insulated
535ABAE-1987 Fixed Tantalum Capacitors with Non-Solid Electrolyte and Porous Anode Silver Case@ Axial Lead@ Elastomeric Seal@ Polarized@ Nickel Positive@ Copper Negative Leads@ Insulated

Electronic Components, Assemblies and Materials Association, Heat capacity of tantalum

ECA 535BAAA-1987 Fixed Tantalum Chip Capacitor Style 1 Protected-Standard Capacitance Range
ECA 535BAAB-1987 Fixed Tantalum Chip Capacitor Style 1 Protected - Extended Capacitance Range
ECA 535BAAC-A-1998 Fixed Tantalum Chip Capacitor Style 1 Protected (Molded)
ECA 535ACAA-1987 Fixed Tantalum Capacitors with Non-Solid Electrolyte and Foil Electrode
ECA 535ACAB-1987 Fixed Tantalum Capacitors with Non-Solid Electrolyte and Foil Electrode
ECA 535ACAC-1987 Fixed Tantalum Capacitors with Non-Solid Electrolyte and Foil Electrode
ECA 535ACAD-1987 Fixed Tantalum Capacitors with Non-Solid Electrolyte and Foil Electrode
ECA IS-757-1998 Visual and Mechanical Inspection for Molded SMT Solid Tantalum Capacitors
ECA 535ABAA-1987 Fixed Tantalum Capacitors with Non-Solid Electrolyte and Porous Anode
ECA 535ABAB-1987 Fixed Tantalum Capacitors with Non-Solid Electrolyte and Porous Anode
ECA 535ABAC-1987 Fixed Tantalum Capacitors with Non-Solid Electrolyte and Porous Anode
ECA 535ABAD-1987 Fixed Tantalum Capacitors with Non-Solid Electrolyte and Porous Anode
ECA 535BAAD-1991 Fixed Tantalum Chip Capacitor Style 1 Protected - Extended Capacitance Range Replaces IS-29-86
ECA 535AAAF-1987 Fixed Tantalum Capacitors with Solid Electrolyte and Porous Anode with Wire Lead Terminals Rectangular, Subminiature, Non-Hermetically Sealed, Plastic Encapsulated, Polarized, Insulated, Radial Lead
ECA 535ABAE-1987 Fixed Tantalum Capacitors with Non-Solid Electrolyte and Porous Anode Silver Case, Axial Lead, Elastomeric Seal, Polarized, Nickel Positive, Copper Negative Leads, Insulated

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, Heat capacity of tantalum

GJB 2510A-2006 Specification for tantalum powders for capacitors of established reliability
GJB 2511A-2006 Specification for tantalum wires for capacitors of established reliability

Japanese Industrial Standards Committee (JISC), Heat capacity of tantalum

JIS C 5831:1979 Reliability assured solid tantalum capacitors
JIS C 5101-15-1:1998 Fixed capacitors for use in electronic equipment Part 15: Blank detail specification: Fixed tantalum capacitors with non-solid electrolyte and foil electrode Assessment level E
JIS C 5101-24:2009 Fixed capacitors for use in electronic equipment -- Part 24: Sectional specification -- Surface mount fixed tantalum electrolytic capacitors with conductive polymer solid electrolyte
JIS C 5101-24:2018 Fixed capacitors for use in electronic equipment -- Part 24: Sectional specification -- Fixed tantalum electrolytic surface mount capacitors with conductive polymer solid electrolyte
JIS K 7123:1987 Testing methods for specific heat capacity of plastics
JIS C 5101-15-2:1998 Fixed capacitors for use in electronic equipment Part 15: Blank detail specification: Fixed tantalum capacitors with non-solid electrolyte and porous anode Assessment level E
JIS C 5101-3:2010 Fixed capacitors for use in electronic equipment -- Part 3: Sectional specification -- Surface mount fixed tantalum electrolytic capacitors with manganese dioxide solid electrolyte
JIS R 1650-3:2002 Method for measurement of fine ceramics thermoelectric materials Part 3: Thermal diffusivity, specific heat capacity, and thermal conductivity
JIS G 3194 AMD 1:2010 Dimensions, mass and permissible variations of hot rolled flat steel (Amendment 1)
JIS G 3192 AMD 1:2010 Dimensions, mass and permissible variations of hot rolled steel sections (Amendment 1)
JIS C 5101-24-1:2009 Fixed capacitors for use in electronic equipment -- Part 24-1: Blank detail specification -- Surface mount fixed tantalum electrolytic capacitors with conductive polymer solid electrolyte -- Assessment level EZ
JIS C 5101-3-1:2010 Fixed capacitors for use in electronic equipment -- Part 3-1: Blank detail specification -- Surface mount fixed tantalum electrolytic capacitors with manganese dioxide solid electrolyte -- Assessment level EZ
JIS R 1611:1997 Test methods of thermal diffusivity, specific heat capacity, and thermal conductivity for fine ceramics by laser flash method
JIS R 1611:2010 Measurement methods of thermal diffusivity, specific heat capacity, and thermal conductivity for fine ceramics by flash method

Electronic Components, Assemblies and Materials Association, Heat capacity of tantalum

EIA_ECA-953-2006 Molded Tantalum Chip Capacitor with Polymer Cathode
EIA/ECA-953-2006 Molded Tantalum Chip Capacitor with Polymer Cathode
ECA EIA-757-A-2015 Visual and Mechanical Inspection for Molded SMT Solid Tantalum Capacitors
ECA EIA-60384-15-2014 Fixed Capacitors for Use in Electronic Equipment - Part 15: Sectional Specification - Fixed Tantalum Capacitors with Non-Solid or Solid Electrolyte
ECA EIA-60384-3-2014 Fixed Capacitors for Use in Electronic Equipment - Part 3: Sectional Specification - Surface Mount Fixed Tantalum Electrolytic Capacitors with Manganese Dioxide Solid Electrolyte
ECA EIA-60384-24-2014 Fixed Capacitors for Use in Electronic Equipment - Part 24: Sectional Specification - Surface Mount Fixed Tantalum Electrolytic Capacitors with Conductive Polymer Solid Electrolyte

Military Standard of the People's Republic of China-General Armament Department, Heat capacity of tantalum

GJB 2511-1995 Specification for tantalum wire for capacitors with reliability indicators
GJB 2511A-2018 Specification for tantalum wire for capacitors with reliability indicators
GJB 2510-1995 Specification for tantalum powder for capacitors with reliability indicators
GJB 2510A-2018 Specification for tantalum powder for capacitors with reliability indicators
GJB 2512-1995 Specification for high purity tantalum foil for capacitors with reliability indicators
GJB 63B-2001 General specification for solid electrolytic tantalum capacitors with reliability indicators
GJB 63-1985 General specification for solid electrolytic tantalum capacitors with reliability indicators
GJB 63A-1991 General specification for solid electrolytic tantalum capacitors with reliability indicators
GJB 2283-1995 General specification for chip solid electrolytic tantalum capacitors with reliability indicators
GJB 63/1B-2011 Detail specification for type CAK solid electrolytic tantalum capacitor with established reliability
GJB 733A-1996 General specification for non-solid electrolyte tantalum fixed capacitors with reliability indicators
GJB 733-1989 General specification for non-solid electrolyte fixed tantalum capacitors with reliability indicators
GJB 63/1-1985 Detailed specifications for CAK type solid electrolytic tantalum capacitors with reliability indicators
GJB 63A/1A-1991 Detailed specifications for JCAK type solid electrolytic tantalum capacitors with reliability indicators
GJB 733/1-2011 Detail specification for established reliability nonsolid electrolytic tantalum capacitors,type CAK35
GJB 733B-2011 General specification for nonsolid-electrolyte fixed tantalum capacitors with established reliability
GJB 733/2-2011 Detail specification for established reliability nonsolid electrolytic tantalum capacitors,type CAK38
GJB 733/3-2011 Detail specification for non-solid electrolytic tantalum capacitors with failure rate ratings, type CAK39
GJB 2283/1-2011 Detail specification for established reliability chip solid electrolytic tantalum capacitors,type CAK45

SE-SIS, Heat capacity of tantalum

SIS SS IEC 361:1981 Fixed tantalum capacitors with liquid or solid electrolyte
SIS SS CECC 30200-1986 Sectional specification: Fixed tantalum capacitors with non-solid or solid electrolyte
SIS SS CECC 30202-1981 Blank detail specification: Tantalum capacitors with non-solid electrolyte, oorous anode
SIS SS CECC 30201-1986 Blank detail specification: Fixed tantalum capacitors with solid electrolyte, porous anode (Sub-family 3)
SIS SS CECC 30202-1987 Blank detail specification: Fixed tantalum capacitors with non-solid electrolyte, porous anode (Sub-familv 2)
SIS 71 10 33-1961 Thermal shnrk test nn glass containers
SIS SS IEC 110:1988 Power capacitors — High frequency capacitors — Recommendation for capacitors for inductive heat generating plants operating at frequencies between 40 and 24 000 Hz

IECQ - IEC: Quality Assessment System for Electronic Components, Heat capacity of tantalum

QC 300201/GB 0001 ISSUE 1-1984 Fixed Tantalum Capacitors with Solid Electrolyte and Porous Anode
QC 300202/GB 0001 ISSUE 1-1985 Fixed Tantalum Capacitors with Non-Solid Electrolyte and Porous Anodes
PQC 31-1984 Fixed Capacitors for Use in Electronic Equipment: Sectional Specification: Fixed Tantalum Chip Capacitors with Solid Electrolyte
QC 300801/ US 0002-1986 Fixed Capacitors for Use in Electronic Equipment: Detail Specification: Fixed Tantalum Chip Capacitor Style 1 Protected - Extended Capacitance Range
QC 300801/ JP 0001-1987 Detail Specification for Electronic Components Fixed Tantalum Chip Capacitors with Solid Electrolyte
QC 300201/ US 0003-1986 Capacitors for Use in Electronic Equipment Detail Specification: Fixed Tantalum Capacitors with Solid Electrolyte and Porous Anode with Radial Leads
QC 300202/US 0001-1983 Fixed Capacitors for Use in Electronic Equipment: Detail Specification: Fixed Tantalum Capacitors with Non-Solid Electrolyte and Porous Anode
QC 300203/US 0004-1984 Detail Specification for Use in Electronic Equipment: Fixed Tantalum Capacitors with Non-Solid Electrolyte and Foil Electrode
QC 300203/US 0003-1984 Detail Specification for Use in Electronic Equipment: Fixed Tantalum Capacitors with Non-Solid Electrolyte and Foil Electrode
QC 300203/US 0001-1984 Detail Specification for Use in Electronic Equipment: Fixed Tantalum Capacitors with Non-Solid Electrolyte and Foil Electrode
QC 300203/US 0002-1984 Detail Specification for Use in Electronic Equipment: Fixed Tantalum Capacitors with Non-Solid Electrolyte and Foil Electrode
QC 300201/ US 0002-1984 Capacitors for Use in Electrotechnical Equipment: Detail Specification: Fixed Tantalum Capacitors with Solid Electrolyte and Porous Anode with Wire Lead Terminals (Amendment 1-1986)
QC 300202/US 0004-1984 Detail Specification for Use in Electronic Equipment; Fixed Tantalum Capacitors with Non-Solid Electrolyte and Porous Anode
QC 300202/US 0003-1984 Detail Specification for Use in Electronic Equipment: Fixed Tantalum Capacitors with Non-Solid Electrolyte and Porous Anode
QC 300202/US 0002-1984 Detail Specification for Use in Electronic Equipment; Fixed Tantalum Capacitors with Non-Solid Electrolyte and Porous Anode
QC 300801/ JP 0002-1990 Detail Specification for Electronic Components Fixed Tantalum Chip Capacitors with Solid Electrolyte Assessment Level(s) E
QC 300201/ CN 0002-1990 Detail Specification for Electronic Components Fixed Tantalum Electrolytic Capacitors with Solid Electrolyte Type CA Assessment Level E
QC 300201/ US 0004-1985 Capacitors for Use in Electronic Equipment: Fixed Tantalum Capacitors with Solid Electrolyte and Porous Anode with Wire Lead Terminals Polar@ Axial Leaded@ Molded@ Non-Hermetically Sealed (Amendment 1-1986)
QC 300201/ SU 0001-1990 Detail Specification for Electronic Components Fixed Tantalum Capacitors with Solid Electrolyte and Porous Anode Type K53-34 (Amendment 1-1992)
QC 300201/ US 0001-1986 Capacitors for Use in Electronic Equipment Fixed Tantalum Capacitors with Solid Electrolyte and Porous Anode with Wire Lead Terminals Hermetically Sealed@ Axial Lead@ Polarized@ Insulated
QC 300801-2006 Fixed capacitors for use in electronic equipment – Part 3-1: Blank detail specification: Surface mount fixed tantalum electrolytic capacitors with manganese dioxide solid electrolyte – Assessment level EZ (Edition 2;)

German Institute for Standardization, Heat capacity of tantalum

DIN EN 130200:1993 Sectional specification: fixed tantalum capacitors with solid or non-solid electrolyte; German version EN 130200:1993
DIN EN 130801:2002 Blank detail specification: Tantalum surface mounting capacitors; German version EN 130801:2002
DIN EN 130200/A3:1998 Sectional specification: Fixed tantalum capacitors with solid or non-solid electrolyte; Amendment A3; German version EN 130200/A3:1998
DIN IEC 60384-15-1:1991 Fixed capacitors for use in electronic equipment; part 15: blank detail specification: fixed tantalum capacitors with non-solid electrolyte and foil electrode; assessment level E; identical with IEC 60384-15-1:1984
DIN IEC 60384-15-2:1991 Fixed capacitors for use in electrical equipment; part 15: blanc detail specification: fixed tantalum capacitors with non-solid electrolyte and porous anode; assessement level E; identical with IEC 60384-15-2:1984
DIN EN 130201:1993 Blank detail specification: fixed tantalum capacitors with solid electrolyte, porous anode (sub-family 3); German version EN 130201:1993
DIN EN 130201/A2:1999 Blank detail specification: Fixed tantalum capacitors with solid electrolyte, porous anode; Amendment A2; German version EN 130201:1993/A2:1998
DIN 5496:1991 Thermal radiation of volume radiators
DIN 6622-2:1981 Household tanks for storing heating oil; 1000 litre
DIN EN 60384-24:2007 Fixed capacitors for use in electronic equipment - Part 24: Sectional specification - Surface mount fixed tantalum electrolytic capacitors with conductive polymer solid electrolyte (IEC 60384-24:2006); German version EN 60384-24:2006
DIN EN 130202:1999 Blank detail specification: Fixed tantalum capacitors with non-solid electrolyte, porous anode (sub-family 2); German version EN 130202:1998
DIN EN 60384-3:2007 Fixed capacitors for use in electronic equipment - Part 3: Sectional specification: Surface mount fixed tantalum electrolytic capacitors with manganese dioxide solid electrolyte (IEC 60384-3:2006); German version EN 60384-3:2006
DIN 6622-3:1981 Household tanks for storing heating oil; tubs
DIN 45910-145:1991 Harmonized system of quality assessment for electronic components; detail specification: polar tantalum electrolytic capacitors DC 6,3 to 50 V, long-life grade, porous tantalum anode with solid electrolyte, rectangular shaped plastic encapsulation, radial
DIN 6622-1:1981 Household tanks for storing heating oil; 620 litre
DIN 44535:1968 Non-thermal storage water heater, wall mounting type, capacity 15 and 80 litres; requirements
DIN EN 60384-24-1:2007 Fixed capacitors for use in electronic equipment - Part 24-1: Blank detail specification - Surface mount fixed tantalum electrolytic capacitors with conductive polymer solid electrolyte - Assessment level EZ (IEC 60384-24-1:2006); German version EN 60384-
DIN EN 1251-1:2000-03 Cryogenic vessels - Transportable vacuum insulated vessels of not more than 1000 litres volume - Part 1: Fundamental requirements; German version EN 1251-1:2000
DIN EN ISO 21029-2:2016-02 Cryogenic vessels - Transportable vacuum insulated vessels of not more than 1 000 litres volume - Part 2: Operational requirements (ISO 21029-2:2015); German version EN ISO 21029-2:2015
DIN EN 60384-24-1:2007-04 Fixed capacitors for use in electronic equipment - Part 24-1: Blank detail specification - Surface mount fixed tantalum electrolytic capacitors with conductive polymer solid electrolyte - Assessment level EZ (IEC 60384-24-1:2006); German version EN 603...
DIN EN 60384-3:2017 Fixed capacitors for use in electronic equipment - Part 3: Sectional specification - Surface mount fixed tantalum electrolytic capacitors with solid (MnO2) electrolyte (IEC 60384-3:2016); German version EN 60384-3:2016
DIN EN 60384-24:2016 Fixed capacitors for use in electronic equipment - Part 24: Sectional specification - Surface mount fixed tantalum electrolytic capacitors with conductive polymer solid electrolyte (IEC 60384-24:2015); German version EN 60384-24:2015
DIN EN 60384-3-1:2007 Fixed capacitors for use in electronic equipment - Part 3-1: Blank detail specification: Surface mount fixed tantalum electrolytic capacitors with manganese dioxide solid electrolyte - Assessment level EZ (IEC 60384-3-1:2006); German version EN 60384-3-1:
DIN EN 60384-18-1:2007 Fixed capacitors for use in electronic equipment - Part 18-1: Blank detail specification - Fixed aluminium electrolytic surface mount capacitors with solid (MnO<(Index)2>) electrolyte - Assessment level EZ (IEC 60384-18-1:2007); German version EN 60384-18
DIN 44899-5:1971 Electrical water-heater; directions of the calculation of thickness of the wall for containers of closed heaters from 50 up to 2000 liters
DIN EN ISO 11357-4:2021-05 Plastics - Differential scanning calorimetry (DSC) - Part 4: Determination of specific heat capacity (ISO 11357-4:2021); German version EN ISO 11357-4:2021
DIN EN 12546-2:2000-09 Materials and articles in contact with foodstuffs - Insulated containers for domestic use - Part 2: Specification for insulated bags and boxes; German version EN 12546-2:2000
DIN 4753-1:2019-05 Water heaters, water heating installations and storage water heaters for drinking water - Part 1: Tanks with a capacity of over 2 000 l
DIN EN 1251-2 Berichtigung 1:2007-05 Cryogenic vessels - Transportable vacuum insulated vessels of not more than 1000 litres volume - Part 2: Design, fabrication, inspection and testing; German version EN 1251-2:2000, Corrigenda to DIN EN 1251-2:2000-03; German version EN 1251-2:2000/AC:2006
DIN EN 1251-2:2000-03 Cryogenic vessels - Transportable vacuum insulated vessels of not more than 1000 litres volume - Part 2: Design, fabrication, inspection and testing; German version EN 1251-2:2000

ES-UNE, Heat capacity of tantalum

UNE-EN 130800:2000/A1:2003 Sectional Specification - Tantalum surface mount capacitors: Amendment to extend CV range (Endorsed by AENOR in December of 2003.)
UNE-EN 60384-15:2017 Fixed capacitors for use in electronic equipment - Part 15: Sectional specification: Fixed tantalum capacitors with non-solid or solid electrolyte (Endorsed by Asociación Española de Normalización in October of 2017.)
UNE-EN 60384-3:2016 Fixed capacitors for use in electronic equipment - Part 3: Sectional specification - Surface mount fixed tantalum electrolytic capacitors with solid (MnO2) electrolyte (Endorsed by AENOR in November of 2016.)
UNE-EN 60384-24:2015/AC:2017-01 Fixed capacitors for use in electronic equipment - Part 24: Sectional specification - Fixed tantalum electrolytic surface mount capacitors with conductive polymer solid electrolyte (Endorsed by Asociación Española de Normalización in March of 2017.)
UNE-EN IEC 60384-24:2021 Fixed capacitors for use in electronic equipment - Part 24: Sectional specification - Fixed tantalum electrolytic surface mount capacitors with conductive polymer solid electrolyte (Endorsed by Asociación Española de Normalización in October of 2021.)
UNE-EN 60384-24:2015 Fixed capacitors for use in electronic equipment - Part 24: Sectional specification - Surface mount fixed tantalum electrolytic capacitors with conductive polymer solid electrolyte (Endorsed by AENOR in November of 2015.)
UNE-EN ISO 11357-4:2021 Plastics - Differential scanning calorimetry (DSC) - Part 4: Determination of specific heat capacity (ISO 11357-4:2021)
UNE-EN ISO 21029-2:2016 Cryogenic vessels - Transportable vacuum insulated vessels of not more than 1 000 litres volume - Part 2: Operational requirements (ISO 21029-2:2015)
UNE-EN 60384-24-1:2006 Fixed capacitors for use in electronic equipment -- Part 24-1: Blank detail specification - Surface mount fixed tantalum electrolytic capacitors with conductive polymer solid electrolyte - Assessment level EZ (IEC 60384-24-1:2006) (Endorsed by AENOR in...
UNE-EN 12546-2:2000 Materials and articles in contact with foodstuffs - Insulated containers for domestic use - Part 2: Specification for insulated bags and boxes (Endorsed by AENOR in August of 2000.)
UNE-EN 1251-2:2001/AC:2007 Cryogenic vessels - Transportable vacuum insulated vessels of not more than 1000 litres volume - Part 2: Design, fabrication, inspection and testing

YU-JUS, Heat capacity of tantalum

JUS N.R2.624-1980 Polar tantahim electrolytic capacitors with sintered anode and solid electrolyte without protected-layer - tantahim chip capacitors (type 3A2), 6,3 to 35 V d.c. Climatic severities 55/125/
JUS N.R2.601-1980 Fixed tantahim capacitors with liquid or solid electrolyte. Sekction of methods of test and general reguirements
JUS N.R2.623-1980 Polar tantalum ekctrolytic capacitors mth sintered anode and solid ekctrolyte coated with epoxy resin (Type 3), 2,5 to 50 Vd.c. Climatic severities 55/085/21

Danish Standards Foundation, Heat capacity of tantalum

DS/EN 130200+A3:1999 Sectional Specification: Fixed Tantalum Capacitors with Non-Solid or Solid Electrolyte
DS/EN 130201+A2:1999 Blank Detail Specification: Fixed Tantalum Capacitors with Solid Electrolyte, Porous Anode
DS/EN 130202:2000 Blank Detail Specifiation: Fixed tantalum capacitors with non-solid electrolyte, porous anode (sub-family 2)
DS/CECC 30801-802:2005 Detail specification: Fixed tantalum surface mount capacitors with solid electrolyte and porous anode: Extended range
DS/EN IEC 60384-24:2021 Fixed capacitors for use in electronic equipment – Part 24: Sectional specification – Fixed tantalum electrolytic surface mount capacitors with conductive polymer solid electrolyte
DS/EN 60384-24:2007 Fixed capacitors for use in electronic equipment - Part 24: Sectional specification - Surface mount fixed tantalum electrolytic capacitors with conductive polymer solid electrolyte
DS/EN ISO 11357-4:2013 Plastics - Differential scanning calorimetry (DSC) - Part 4: Determination of specific heat capacity
DS/ISO 11357-4:2021 Plastics – Differential scanning calorimetry (DSC) – Part 4: Determination of specific heat capacity
DS/EN 1251-1:2000 Cryogenic vessels - Transportable vacuum insulated vessels of not more than 1000 litres volume - Part 1: Fundamental requirements
DS/EN 1251-3:2000 Cryogenic vessels - Transportable vacuum insulated vessels of not more than 1000 litres volume - Part 3: Operational requirements
DS/IEC 949:1990 Calculation of thermally permissible short-circuit currents, taking into account non-adiabatic heating effects
DS/EN 60384-24-1:2007 Fixed capacitors for use in electronic equipment - Part 24-1: Blank detail specification - Surface mount fixed tantalum electrolytic capacitors with conductive polymer solid electrolyte - Assessment level EZ
DS/EN 60384-3-1:2007 Fixed capacitors for use in electronic equipment - Part 3-1: Blank detail specification: Surface mount fixed tantalum electrolytic capacitors with manganese dioxide solid electrolyte - Assessment level EZ
DS/EN ISO 11357-4:2021 Plastics – Differential scanning calorimetry (DSC) – Part 4: Determination of specific heat capacity (ISO 11357-4:2021)
DS/EN 1251-2/AC:2007 Cryogenic vessels - Transportable vacuum insulated vessels of not more than 1000 litres volume - Part 2: Design, fabrication, inspection and testing
DS/EN 1251-2:2000 Cryogenic vessels - Transportable vacuum insulated vessels of not more than 1000 litres volume - Part 2: Design, fabrication, inspection and testing

Lithuanian Standards Office , Heat capacity of tantalum

LST EN 130200+A3-2001 Sectional specification: Fixed Tantalum Capacitors with Non-Solid or Solid Electrolyte
LST EN 130201+A2-2001 Blank Detail Specification: Fixed tantalum capacitors with solid electrolyte, porous anode (sub-family 3)
LST EN 130202-2001 Blank Detail Specification: Fixed tantalum capacitors with non-solid electrolyte, porous anode (sub-family 2)
LST EN 60384-3-2007 Fixed capacitors for use in electronic equipment - Part 3: Sectional specification: Surface mount fixed tantalum electrolytic capacitors with manganese dioxide solid electrolyte (IEC 60384-3:2006)
LST EN 60384-3-2007/AC-2009 Fixed capacitors for use in electronic equipment - Part 3: Sectional specification: Surface mount fixed tantalum electrolytic capacitors with manganese dioxide solid electrolyte (IEC 60384-3:2006)
LST EN 60384-24-2006 Fixed capacitors for use in electronic equipment - Part 24: Sectional specification - Surface mount fixed tantalum electrolytic capacitors with conductive polymer solid electrolyte (IEC 60384-24:2006)
LST EN 1251-1-2002 Cryogenic vessels - Transportable vacuum insulated vessels of not more than 1000 litres volume - Part 1: Fundamental requirements
LST EN 1251-3-2002 Cryogenic vessels - Transportable vacuum insulated vessels of not more than 1000 litres volume - Part 3: Operational requirements
LST EN ISO 11357-4:2021 Plastics - Differential scanning calorimetry (DSC) - Part 4: Determination of specific heat capacity (ISO 11357-4:2021)
LST EN 60384-3-1-2007 Fixed capacitors for use in electronic equipment - Part 3-1: Blank detail specification: Surface mount fixed tantalum electrolytic capacitors with manganese dioxide solid electrolyte - Assessment level EZ (IEC 60384-3-1:2006)
LST EN 60384-3-1-2007/AC-2009 Fixed capacitors for use in electronic equipment - Part 3-1: Blank detail specification: Surface mount fixed tantalum electrolytic capacitors with manganese dioxide solid electrolyte - Assessment level EZ (IEC 60384-3-1:2006)
LST EN 1251-2-2002 Cryogenic vessels - Transportable vacuum insulated vessels of not more than 1000 litres volume - Part 2: Design, fabrication, inspection and testing
LST EN 1251-2-2002/AC-2006 Cryogenic vessels - Transportable vacuum insulated vessels of not more than 1000 litres volume - Part 2: Design, fabrication, inspection and testing

AENOR, Heat capacity of tantalum

UNE 20543-15/1M:1995 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT. SECTIONAL SPECIFICATION: FIXED TANTALUM CAPACITORS WITH NON-SOLID OR SOLID ELECTROLYTE.
UNE 20543-15:1985 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT. SECTIONAL SPECIFICATION: FIXED TANTALUM CAPACITORS WITH NON-SOLID OR SOLID ELECTROLYTE
UNE-EN ISO 11357-4:2014 Plastics - Differential scanning calorimetry (DSC) - Part 4: Determination of specific heat capacity (ISO 11357-4:2014)

British Standards Institution (BSI), Heat capacity of tantalum

BS EN 60384-15:2017 Fixed capacitors for use in electronic equipment. Sectional specification: Fixed tantalum capacitors with non-solid or solid electrolyte
BS 9070-3:1970 Specification for fixed capacitors of assessed quality: generic data and methods of test - Tantalum electrolytic capacitors
BS CECC 30800:1991 Harmonized system of quality assessment for electronic components. Sectional specification: tantalum surface mounting capacitors
BS EN 60384-24:2006 Fixed capacitors for use in electronic equipment - Sectional specification - Surface mount fixed tantalum electrolytic capacitors with conductive polymer solid electrolyte
BS EN 60384-24:2015 Fixed capacitors for use in electronic equipment. Sectional specification. Surface mount fixed tantalum electrolytic capacitors with conductive polymer solid electrolyte
BS EN 60384-3:2007 Fixed capacitors for use in electronic equipment - Sectional specification: Surface mount fixed tantalum electrolytic capacitors with manganese dioxide solid electrolyte
BS 853-1:1990 Specification for vessels for use in heating systems. Calorifiers and storage vessels for central heating and hot water supply
BS 853-1:1990+A3:2011 Specification for vessels for use in heating systems. Calorifiers and storage vessels for central heating and hot water supply
BS EN 60384-3:2006 Fixed capacitors for use in electronic equipment — Part 3: Sectional specification: Surface mount fixed tantalum electrolytic capacitors with manganese dioxide solid electrolyte
BS EN 60384-3:2016 Tracked Changes. Fixed capacitors for use in electronic equipment. Sectional specification. Surface mount fixed tantalum electrolytic capacitors with solid (MnO<sub>2</sub>) electrolyte
BS EN ISO 11357-4:2013 Plastics - Differential scanning calorimetry (DSC) - Determination of specific heat capacity
BS EN ISO 11357-4:2014 Plastics. Differential scanning calorimetry (DSC). Determination of specific heat capacity
BS EN ISO 11357-4:2021 Plastics. Differential scanning calorimetry (DSC). Determination of specific heat capacity
BS EN 60384-24-1:2006 Fixed capacitors for use in electronic equipment - Blank detail specification - Surface mount fixed tantalum electrolytic capacitors with conductive polymer solid electrolyte - Assessment level EZ
BS QC 300200:1983 Harmonized system of quality assessment for electronic components. Fixed capacitors for use in electronic equipment. Sectional specification: fixed tantalum capacitors with solid or non-solid electrolyte
BS EN IEC 60384-24:2021 Tracked Changes. Fixed capacitors for use in electronic equipment. Sectional specification. Fixed tantalum electrolytic surface mount capacitors with conductive polymer solid electrolyte
BS EN 1251-1:2000 Cryogenic vessels - Transportable vacuum insulated vessels of not more than 1000 litres volume - Fundamental requirements
BS EN ISO 21029-2:2015 Cryogenic vessels. Transportable vacuum insulated vessels of not more than 1 000 litres volume. Operational requirements
BS EN 1251-3:2000 Cryogenic vessels - Transportable vacuum insulated vessels of not more than 1000 litres volume - Operational requirements
BS EN 1251-2:2000 Cryogenic vessels - Transportable vacuum insulated vessels of not more than 1000 litres volume - Design, fabrication, inspection and testing
BS EN 60384-3-1:2006 Fixed capacitors for use in electronic equipment - Part 3-1:Blank detail specification - Surface mount fixed tantalum electrolytic capacitors with manganese dioxide solid electrolyte - Assessment level EZ
BS EN 60384-3-1:2008 Fixed capacitors for use in electronic equipment - Blank detail specification: surface mount fixed tantalum electrolytic capacitors with manganese dioxide solid electrolyte - Assessment level EZ
BS ISO 24144:2023 Thermal insulation. Test methods for specific heat capacity of thermal insulation for buildings in the high temperature range. Differential scanning calorimetry (DSC) method
BS EN 821-3:2005 Advanced technical ceramics - Monolithic ceramics - Thermo-physical properties - Determination of specific heat capacity
22/30397807 DC BS ISO 24144. Thermal insulation. Test method for Specific heat capacity of thermal insulation for buildings in the high temperature range. DSC method
BS ISO 21029-1:2018+A1:2019 Cryogenic vessels. Transportable vacuum insulated vessels of not more than 1 000 litres volume - Design, fabrication, inspection and tests
BS EN 60110-1:1998 Power capacitors for induction heating installations. General
BS EN 130201:1995 Specification for harmonized system of quality assessment for electronic components - Blank detail specification: fixed tantalum capacitors with solid electrolyte, porous anode (sub-family 3)
BS QC 300203:1985 Specification for harmonized system of quality assessment for electronic components. Fixed capacitors for use in electronic equipment. Blank detail specification: fixed tantalum capacitors with non-solid electrolyte and foil electrode. Assessment level E
BS CECC 30202:1988 Specification for harmonized system of quality assessment for electronic components. Blank detail specification: fixed tantalum capacitors with non-solid electrolyte, porous anode (sub-family 2)
BS EN 130202:1998 Harmonized system of quality assessment for electronic components - Blank detail specification: fixed tantalum capacitors with non-solid electrolyte, porous anode (sub-family 2)
BS QC 300201:1985 Specification for harmonized system of quality assessment for electronic components. Fixed capacitors for use in electronic equipment. Blank detail specification: fixed tantalum capacitors with solid electrolyte and porous anode. Assessment level E
BS QC 300202:1985 Specification for harmonized system of quality assessment for electronic components. Fixed capacitors for use in electronic equipment. Blank detail specification: fixed tantalum capacitors with non-solid electrolyte and porous anode. Assessment level E
BS ISO 19935-2:2020 Plastics. Temperature modulated DSC. Measurement of specific heat capacity cp

Professional Standard - Electron, Heat capacity of tantalum

SJ 20973-2007 Capacitors, fixed, double polarized, electrolytic (solid electrolyte), tantalum, established reliability, general specification for
SJ 20319-1993 Capacitors,fixed,electrolytic(non-solid electrolyte),tantalum,established reliability,style CAK38,detail specification for
SJ 20320-1993 Capacitors,fixed,electrolytic(non-solid electrolyte),tantalum,established reliability,style CAK39,detail specification for
SJ 20206-1992 Capacitors, electrolytic (non-solid electrolyte),tantalum, (polarized, plainfoil), established reliability, Style CAK11, Detail specification for
SJ 52283/3-2008 Capacitors, solid electrolytic, tantalum, chip, established reliability, type CAK45A detail specification for
SJ 51520/3-2002 Capacitors,electrolytic(solid electrolyte),tantalum,(polarized,sintered slug),moulded,established reliability,Type CAK43 detail specification for
SJ 51520/4-2003 Capacitors,electrolytic (solid electrolyte),tantalum,(polarized,sintered slug),moulded,established reliability,Type CAK41 detail specification for
SJ 50063/5-2007 Capacitors, fixed, electrolytic (solid electrolyte), tantalum type CAK44M, established reliability detail specification for
SJ 50063/4-2004 Capacitors,fixed electrolytic(solid electrolyte),tantalum,style CAKT,detail specification for
SJ 52283/1-1996 Capacitors,fixed,solid electrolytic(tantalum),chip established reliability,style CAK45,detail specification for
SJ 52283/2-2008 Capacitors, solid electrolytic, tantalum, chip, established reliability, type CAK45L detail specification for
SJ 20208-1992 Detail specification for capacitors,Electrolytic (Solid eletrolyte),Tantalum, (nonpolarized, sintered slug), Established reliability,Type CAK70
SJ 50063.1-1994 Capacitors,fixed,electrolytic(solid eiectrolyte)tantalum,(nonpolarized)established reliability,styleCAK,detail specificaion for
SJ 50733/3-2003 Capacitors,electrolytic (nonsolid electrolyte),tantalum,hermeticsly sealed,established reliability,style CAK35,detail specification for
SJ 50063/2A-2003 Capacitors,electrolytic (soild electrolyte),tantalum,hermeticslly sealed,established reliability,style CAK-1,detail specification for
SJ 50733/1-1994 Capacitors,fixed,electrolytic,non solid electrolyte tantalum,established reliability,style CAK31 detail specification for
SJ 50733/2-1994 Capacitors,fixed,electrolytic,non solid electrolyte tantalum,established reliability,style CAK81 detail,specification for
SJ 50063/3-2002 Capacitors,electrolytic (solid electrolyte),tantalum,(polarized,sintered slug) hermetically Sealed established reliability type CAK-8 detail specification for
SJ 50733/6-2008 Capacitors, electrolytic (nonsolid electrolyte), tantalum, established reliability, type CAK38, detail specification for
SJ 50733/4-2004 Capacitors,fixed electrolytic(non-solid electrolyte),tantalum,hermetically sealed,established reliability,style CAK356,detail specification for
SJ 50733/5-2007 Capacitors, fixed, electrolytic (non-solid electrolyte), tantalum hermetically sealed type CAK35X, established reliability detail specification for
SJ 1886-1981 Marking content and method of thermistors

U.S. Military Regulations and Norms, Heat capacity of tantalum

ARMY MIL-PRF-55365/12 D (2)-2008 CAPACITORS, CHIP, FIXED, TANTALUM, POLARIZED ESTABLISHED RELIABILITY AND NONESTABLISHED RELIABILITY, STYLE CWR15
ARMY MIL-PRF-49137 C-2004 CAPACITORS, FIXED, ELECTROLYTIC (SOLID ELECTROLYTE), TANTALUM, MOLDED, CONFORMAL COATED AND METAL CASED WITH PLASTIC END-FILL, NONHERMETICALLY SEALED, GENERAL SPECIFICATION FOR
ARMY QPL-55365-81-2006 CAPACITOR, FIXED, ELECTROLYTIC (TANTALUM), CHIP, ESTABLISHED RELIABILITY AND NONESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR
ARMY MIL-PRF-55365/12 E-2011 CAPACITORS, CHIP, FIXED, TANTALUM, POLARIZED ESTABLISHED RELIABILITY AND NONESTABLISHED RELIABILITY, STYLE CWR15
ARMY MIL-PRF-55365/13 A-2011 CAPACITORS, CHIP, FIXED, TANTALUM, POLARIZED ESTABLISHED RELIABILITY AND NONESTABLISHED RELIABILITY, STYLE CWR16
ARMY QPL-55365-81 NOTICE 1-2008 Capacitor, Fixed, Electrolytic (Tantalum), Chip, Established Reliability and Nonestablished Reliability, General Specification for
ARMY MIL-PRF-55365 G (3)-2010 CAPACITOR, FIXED, ELECTROLYTIC (TANTALUM), CHIP, ESTABLISHED RELIABILITY, NONESTABLISHED RELIABILITY, AND HIGH RELIABILITY, GENERAL SPECIFICATION FOR
ARMY MIL-PRF-55365 H NOTICE 1-2011 CAPACITOR, FIXED, ELECTROLYTIC (TANTALUM), CHIP, ESTABLISHED RELIABILITY, NONESTABLISHED RELIABILITY, AND HIGH RELIABILITY, GENERAL SPECIFICATION FOR
ARMY MIL-PRF-55365 H-2011 CAPACITOR, FIXED, ELECTROLYTIC (TANTALUM), CHIP, ESTABLISHED RELIABILITY, NONESTABLISHED RELIABILITY, AND HIGH RELIABILITY, GENERAL SPECIFICATION FOR
ARMY MIL-PRF-55365 H NOTICE 2-2012 CAPACITOR, FIXED, ELECTROLYTIC (TANTALUM), CHIP, ESTABLISHED RELIABILITY, NONESTABLISHED RELIABILITY, AND HIGH RELIABILITY, GENERAL SPECIFICATION FOR
ARMY MIL-PRF-55365 H (1)-2012 CAPACITOR, FIXED, ELECTROLYTIC (TANTALUM), CHIP, ESTABLISHED RELIABILITY, NONESTABLISHED RELIABILITY, AND HIGH RELIABILITY, GENERAL SPECIFICATION FOR
ARMY MIL-PRF-55365/8 H-2011 CAPACITORS, CHIP, FIXED, TANTALUM, POLARIZED ESTABLISHED RELIABILITY, NON-ESTABLISHED RELIABILITY AND HIGH RELIABILITY, STYLE CWR11 (METRIC)
ARMY QPL-55365-2012 Capacitor, Fixed, Electrolytic (Tantalum), Chip, Established Reliability, Nonestablished Reliability, and High Reliability, Generation Specification for
ARMY MIL-PRF-55365/4 H-2011 CAPACITORS, CHIP, FIXED, TANTALUM, POLARIZED ESTABLISHED RELIABILITY, NON-ESTABLISHED RELIABILITY, AND HIGH RELIABILITY STYLES CWR06 AND CWR09
ARMY MIL-PRF-55365/11 C-2011 CAPACITORS, CHIP, FIXED, TANTALUM, POLARIZED ESTABLISHED RELIABILITY, NON-ESTABLISHED RELIABILITY AND HIGH RELIABILITY, STYLES CWR19 AND CWR29
ARMY QPL-49137-36-2005 CAPACITORS, FIXED, ELECTROLYTIC (SOLID ELECTROLYTE), TANTALUM, MOLDED, CONFORMAL COATED AND METAL CASED WITH PLASTIC END-FILL, NONHERMETICALLY SEALED, GENERAL SPECIFICATION FOR
ARMY MIL-PRF-55365 G (2)-2008 CAPACITOR, FIXED, ELECTROLYTIC (TANTALUM), CHIP, ESTABLISHED RELIABILITY, NONESTABLISHED RELIABILITY, AND HIGH RELIABILITY, GENERAL SPECIFICATION FOR

ES-AENOR, Heat capacity of tantalum

UNE 20-543 Pt.15-1985
UNE 9-105-1992 Boilers, economizers, reheaters superheaters. Hydraulic pressure test

European Committee for Electrotechnical Standardization（CENELEC）, Heat capacity of tantalum

EN 60384-15:2017 Fixed capacitors for use in electronic equipment - Part 15: Sectional specification: Fixed tantalum capacitors with non-solid or solid electrolyte
EN 60384-3:2006 Fixed capacitors for use in electronic equipment Part 3: Sectional specification: Surface mount fixed tantalum electrolytic capacitors with manganese dioxide solid electrolyte (Incorporating corrigendum April 2009)
EN 60384-3:2016 Fixed capacitors for use in electronic equipment - Part 3: Sectional specification - Surface mount fixed tantalum electrolytic capacitors with solid (MnO2) electrolyte
EN IEC 60384-24:2021 Fixed capacitors for use in electronic equipment - Part 24: Sectional specification - Fixed tantalum electrolytic surface mount capacitors with conductive polymer solid electrolyte
EN 60384-24:2015 Fixed capacitors for use in electronic equipment - Part 24: Sectional specification - Fixed tantalum electrolytic surface mount capacitors with conductive polymer solid electrolyte
EN 130200:1993 Sectional Specification: Fixed Tantalum Capacitors with Non-Solid or Solid Electrolyte (Incorporates Amendment A3: 1998)
EN 60384-3-1:2006 Fixed capacitors for use in electronic equipment - Part 3-1: Blank detail specification: Surface mount fixed tantalum electrolytic capacitors with manganese dioxide solid electrolyte - Assessment level EZ
EN 60384-3-1:2006/corrigendum Apr. 2009 Fixed capacitors for use in electronic equipment - Part 3-1: Blank detail specification: Surface mount fixed tantalum electrolytic capacitors with manganese dioxide solid electrolyte - Assessment level EZ
EN 130202:1998 Blank Detail Specification: Fixed Tantalum Capacitors with Non-Solid Electrolyte, Porous Anode (Sub-Family 2)
EN 60384-24-1:2006 Fixed capacitors for use in electronic equipment Part 24-1: Blank detail specification - Surface mount fixed tantalum electrolytic capacitors with conductive polymer solid electrolyte - Assessment level EZ
EN 130201:1998 Blank Detail Specification: Fixed Tantalum Capacitors with Solid Electrolyte, Porous Anode (SUB-FAMILY 3; Incorporates Amendment A2: 1998)

International Electrotechnical Commission (IEC), Heat capacity of tantalum

IEC 60384-3:2006 Fixed capacitors for use in electronic equipment - Part 3: Sectional specification: Surface mount fixed tantalum electrolytic capacitors with manganese dioxide solid electrolyte
IEC 60384-3:2016 Fixed capacitors for use in electronic equipment - Part 3: Sectional specification - Surface mount fixed tantalum electrolytic capacitors with solid (MnO2) electrolyte
IEC 60384-3:2006/COR1:2007 Fixed capacitors for use in electronic equipment - Part 3: Sectional specification - Surface mount fixed tantalum electrolytic capacitors with manganese dioxide solid electrolyte; Corrigendum 1
IEC 60384-24:2015 Fixed capacitors for use in electronic equipment - Part 24: Sectional specification - Fixed tantalum electrolytic surface mount capacitors with conductive polymer solid electrolyte
IEC 60384-24:2006 Fixed capacitors for use in electronic equipment - Part 24: Sectional specification - Surface mount fixed tantalum electrolytic capacitors with conductive polymer solid electrolyte
IEC 60384-24:2006/COR1:2006 Fixed capacitors for use in electronic equipment - Part 24: Sectional specification - Surface mount fixed tantalum electrolytic capacitors with conductive polymer solid electrolyte - Corrigendum 1
IEC 60384-24:2021 Fixed capacitors for use in electronic equipment - Part 24: Sectional specification - Fixed tantalum electrolytic surface mount capacitors with conductive polymer solid electrolyte
IEC 60384-3-1:2006 Fixed capacitors for use in electronic equipment - Part 3-1: Blank detail specification: Surface mount fixed tantalum electrolytic capacitors with manganese dioxide solid electrolyte - Assessment level EZ
IEC 60949:1988/AMD1:2008 Calculation of thermally permissible short-circuit currents, taking into account non-adiabatic heating effects; Amendment 1
IEC 60384-24:2015/COR1:2016 Fixed capacitors for use in electronic equipment - Part 24: Sectional specification - Fixed tantalum electrolytic surface mount capacitors with conductive polymer solid electrolyte; Corrigendum 1
IEC 60384-24-1:2006 Fixed capacitors for use in electronic equipment - Part 24-1: Blank detail specification - Surface mount fixed tantalum electrolytic capacitors with conductive polymer solid electrolyte - Assessment level EZ

ESDU - Engineering Sciences Data Unit, Heat capacity of tantalum

ESDU 86007 B-2003 Heat capacity and enthalpy of liquids: alkanes.
ESDU 75015 A-2003 Heat capacity and enthalpy of liquids: aromatic hydrocarbons.
ESDU 79028 B-2005 Heat capacity and enthalpy of liquids: aliphatic alcohols.
ESDU 79028 A-2003 Heat capacity and enthalpy of liquids: Aliphatic alcohols
ESDU 76010 B-2003 Heat capacity and enthalpy of liquids: halogenated methanes.
ESDU 81030 A-2003 Heat capacity and enthalpy of liquids: aliphatic ketones.
ESDU 86023 A-2003 Heat capacity and enthalpy of liquids: alkenes and alkadienes.
ESDU 77007 A-2003 Heat capacity and enthalpy of liquids: halogenated ethanes and ethylenes.
ESDU 85024 A-2003 Heat capacity and enthalpy of liquids: organic sulphur compounds (thiols and sulphides).
ESDU 68008 C-1978 Specific heat capacity at constant pressure of ice@ water and steam.
ESDU 77024 B-1979 Thermal conductivity@ viscosity@ heat capacity@ density and Prandtl number of sea water and its concentrates.
ESDU 99011 A-2003 Thermal conductivity@ viscosity@ isobaric specific heat capacity and Prandtl number of gases at low pressure: Aliphatic hydrocarbons - alkanes.
ESDU 99005 A-2003 Thermal conductivity@ viscosity@ isobaric specific heat capacity and Prandtl number of gases at low pressure: inorganic gases.
ESDU 68023-1978 Thermal conductivity@ viscosity@ heat capacity@ density and Prandtl number of solid@ liquid and gaseous heavy water.

HU-MSZT, Heat capacity of tantalum

MSZ 20858-1957

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Heat capacity of tantalum

GB/T 15076.13-2017 Methods for chemical analysis of tantalum and niobium—Part 13: Determination of nitrogen content—Inert gas fusion thermal conductivity method
GB/T 19466.4-2016 Plastics—Differential scanning calorimetry （DSC）—Part 4: Determination of specific heat capacity

CZ-CSN, Heat capacity of tantalum

CSN 35 8291 Cast.15-1988 Fixed capacitors for usa in electronic equipment. Part 15: Sectional speoification: Fixed tantalum capacitors with non solid or solid electrolyte
CSN 70 0559-1972 Testing of glass containers. Thermal shock test on glass containers
CSN 35 8207-1964 Capacitors for use under tropical conditions.
CSN 35 8785-1975 Semiconductor devices. Varicaps. Measurement of thermal capacitance coefflcient.
CSN 35 8291 Cast.15-3-1987 Fixed capacitors for use in electronic equipment Part 15: Blank detail specification: Fixed tantalum capacitors with solid electrolyte and porous anode Assessment level: E

IN-BIS, Heat capacity of tantalum

European Committee for Standardization (CEN), Heat capacity of tantalum

EN 130801:2002 Blank Detail Specification: Tantalum Surface Mounting Capacitors Ratified European Text; Supersedes CECC 30 801: 1990
EN 1251-1:2000 Cryogenic vessels - Transportable vacuum insulated vessels of not more than 1000 litres volume - Part 1: Fundamental requirements
EN 1251-3:2000 Cryogenic Vessels - Transportable Vacuum Insulated Vessels of Not More Than 1000 Litres Volume - Part 3: Operational Requirements
EN ISO/TS 16491:2012 Guidelines for the evaluation of uncertainty of measurement in air conditioner and heat pump cooling and heating capacity tests
EN 1251-2:2000 Cryogenic vessels - Transportable vacuum insulated vessels of not more than 1000 litres volume - Part 2: Design, fabrication, inspection and testing
EN ISO 7459:2004 Glass containers - Thermal shock resistance and thermal shock endurance - Test methods
DD ENV 821-3-1993 Advanced Technical Ceramics - Monolithic Ceramics - Thermo- Physical Properties - Part 3: Determination of Specific Heat Capacity

CENELEC - European Committee for Electrotechnical Standardization, Heat capacity of tantalum

EN 130201:1993 Blank Detail Specification: Fixed Tantalum Capacitors with Solid Electrolyte@ Porous Anode (Sub-Family 3)

Professional Standard - Energy, Heat capacity of tantalum

NB/SH/T 0632-2014 Standard test method for determining specific heat capacity by differential scanning calorimetry

American Society for Testing and Materials (ASTM), Heat capacity of tantalum

ASTM E2584-20 Standard Practice for Thermal Conductivity of Materials Using a Thermal Capacitance (Slug) Calorimeter
ASTM E2584-07 Standard Practice for Thermal Conductivity of Materials Using a Thermal Capacitance (Slug) Calorimeter
ASTM C149-86(2005) Standard Test Method for Thermal Shock Resistance of Glass Containers
ASTM E457-96 Standard Test Method for Measuring Heat-Transfer Rate Using a Thermal Capacitance (Slug) Calorimeter
ASTM E457-96(2002) Standard Test Method for Measuring Heat-Transfer Rate Using a Thermal Capacitance (Slug) Calorimeter
ASTM E457-08 Standard Test Method for Measuring Heat-Transfer Rate Using a Thermal Capacitance (Slug) Calorimeter
ASTM E457-08(2020) Standard Test Method for Measuring Heat-Transfer Rate Using a Thermal Capacitance (Slug) Calorimeter
ASTM E457-08(2015) Standard Test Method for Measuring Heat-Transfer Rate Using a Thermal Capacitance (Slug) Calorimeter
ASTM E2584-10 Standard Practice for Thermal Conductivity of Materials Using a Thermal Capacitance (Slug) Calorimeter
ASTM E1269-11 Standard Test Method for Determining Specific Heat Capacity by Differential Scanning Calorimetry
ASTM C149-86(2010) Standard Test Method for Thermal Shock Resistance of Glass Containers
ASTM E1269-11(2018) Standard Test Method for Determining Specific Heat Capacity by Differential Scanning Calorimetry
ASTM E2584-14 Standard Practice for Thermal Conductivity of Materials Using a Thermal Capacitance 40;Slug41; Calorimeter
ASTM C149-14 Standard Test Method for Thermal Shock Resistance of Glass Containers
ASTM C149-86(1995) Standard Test Method for Thermal Shock Resistance of Glass Containers
ASTM C149-14(2020) Standard Test Method for Thermal Shock Resistance of Glass Containers
ASTM E2716-23 Standard Test Method for Determining Specific Heat Capacity by Modulated Temperature Differential Scanning Calorimetry
ASTM E1269-05 Standard Test Method for Determining Specific Heat Capacity by Differential Scanning Calorimetry
ASTM E1269-04 Standard Test Method for Determining Specific Heat Capacity by Differential Scanning Calorimetry
ASTM E2716-09 Standard Test Method for Determining Specific Heat Capacity by Sinusoidal Modulated Temperature Differential Scanning Calorimetry
ASTM A537/A537M-06 Standard Specification for Pressure Vessel Plates, Heat-Treated, Carbon-Manganese-Silicon Steel
ASTM A537/A537M-95(2000) Standard Specification for Pressure Vessel Plates, Heat-Treated, Carbon-Manganese-Silicon Steel
ASTM A537/A537M-91 Standard Specification for Pressure Vessel Plates, Heat-Treated, Carbon-Manganese-Silicon Steel
ASTM A537/A537M-20 Standard Specification for Pressure Vessel Plates, Heat-Treated, Carbon-Manganese-Silicon Steel

TH-TISI, Heat capacity of tantalum

TIS 1902-2009 Fixed capacitors for use in electronic equipment.part 3: sectional specification: surface mount fixed tantalum electrolytic capacitors with manganese dioxide solid electrolyte
TIS 1903-1999 Fixed capacitors for use in electronic equipment.part 3-101: detail specification: fixed tantalum chip capacitors for surface mounting with solid electrolyte and porous anode, style i. Assessment level e

Professional Standard - Petroleum, Heat capacity of tantalum

SY/T 7517-2010 Determination for heat capacity of crude oil
SY 7517-2010 Determination method of specific heat capacity of crude oil

RU-GOST R, Heat capacity of tantalum

GOST 21523.3.1-1993 Modified wood. Method for determination of heat capacity
GOST 21523.3-1987 Modified wood. Method for determination of thermal conductivity, heat conductivity and heat capacity
GOST 13903-2005 Glass containers. Methods of testing the thermal resistivity
GOST R 50237-1992 Modified wood. Method for determination of heat capacity
GOST 13903-1993 Glass containers. Test methods for thermal resistivity
GOST R 56754-2015 Plastics. Differential scanning calorimetry (DSC). Part 4. Determination of specific heat capacity
GOST 17733-1989 Glass containers. Method for determination of thermal resistance at raised temperatures
GOST 18689-1981 Capacitors for electric-thermal installations with frequences 0,5-10,0 kHz. General specifications

工业和信息化部, Heat capacity of tantalum

JB/T 13515-2018 Volumetric chilled water (heat pump) unit with full heat recovery

Association of German Mechanical Engineers, Heat capacity of tantalum

DVS 2205-5-1986 Mathematical calculation of containers and vessels of thermoplastic polymers; square containers
DVS 2205-5-1980 Calculation of containers and apparatuses of thermoplastics; rectangular containers
DVS 2205-5 Beiblatt-1984 "Calculation of containers and apparatuses of thermoplastics; rectangular containers, structural details"
DVS 2205-2-1974 "Calculation of containers and apparatuses of thermoplastics; standing round, unpressurized containers"
DVS 2205-1 Beiblatt 19-2008
DVS 2205-5 Beiblatt-1982
DVS 2205-2-1996 "Calculation of containers and apparatuses of thermoplastics - Standing round, unpressurized containers"
DVS 2205-1-1985 Mathematical calculation of containers and vessels of thermoplastic polymers; parameters
DVS 2205-1-1974 Calculation of containers and apparatuses of thermoplastics; characteristic values
DVS 2205-3-1975 "Calculation of containers and apparatuses of thermoplastics, welded joints"
DVS 2205-4-1977 Calculation of containers and apparatus of thermoplastics; flanged joints

FI-SFS, Heat capacity of tantalum

SFS 3291-1978
SFS 3977 E-1978
SFS 4967 E-1985 In case of interpretation disputes the Finnish version applies. Date of translation 1987-03-23.
SFS 4966 E-1983 In case of interpretation disputes the Finnish version applies. Date of translation 1987-03-23.
SFS 3978 E-1977
SFS 3975 E-1977
SFS 3979 E-1977

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Heat capacity of tantalum

ASHRAE OR-16-C047-2016 Experimental Validation of a Thermal Resistance and Capacity Model for Geothermal Boreholes
ASHRAE 4054-1997 Deferred Heat Supply for Space Heating Using a Capacity-Limiting Device - A Beneficial Approach for District Heating
ASHRAE 4134-1998 Potential of the Zeotropic Mixture R-22/R-142b in High-Temperature Heat Pump Water Heaters with Capacity Modulation

KR-KS, Heat capacity of tantalum

KS C IEC 60384-3-2018 Fixed capacitors for use in electronic equipment — Part 3: Sectional specification — Surface mount fixed tantalum electrolytic capacitors with manganese dioxide solid electrolyte
KS M ISO 11357-4-2016 Plastics－Differential scanning calorimetry(DSC)－Part 4：Determination of specific heat capacity
KS B ISO 21029-2-2017 Cryogenic vessels — Transportable vacuum insulated vessels of not more than 1 000 litres volume — Part 2: Operational requirements

American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE), Heat capacity of tantalum

ASHRAE AN-04-8-3-2004 Water Chemistry Issues in Geothermal Heat Pump Systems

Natural Gas Processor's Association (NGPA), Heat capacity of tantalum

GPA RR-109-1987 Acoustic Determination of the Thermodynamic Reference State Heat Capacity of n-Heptane Vapor
GPA RR-123-1989 Reference State Heat Capacities of Three C-8 Compounds

Society of Automotive Engineers (SAE), Heat capacity of tantalum

SAE AS7229-1992 Rivets, Steel, Corrosion and Heat Resistant 18Cr-10.5Ni-0.70(Cb + Ta) Solution Heat Treated Procurement Specification For FSC 5320; UNS S34700; Supersedes AMS 7229F [Superseded: SAE AMS 7229H]

US-FCR, Heat capacity of tantalum

FCR AF I32-1068-1998 HEATING SYSTEMS AND UNFIRED PRESSURE VESSELS
FCR AF AFI AMC 32-1068 SUPP 1-1995 HEATING SYSTEMS AND UNFIRED PRESSURE VESSELS
FCR 21 CFR PART 113-2015 THERMALLY PROCESSED LOW-ACID FOODS PACKAGED IN HERMETICALLY SEALED CONTAINERS
FCR 21 CFR PART 113-2014 THERMALLY PROCESSED LOW-ACID FOODS PACKAGED IN HERMETICALLY SEALED CONTAINERS

International Organization for Standardization (ISO), Heat capacity of tantalum

ISO 11289:1993 Heat-processed foods in hermetically sealed containers; determination of pH
ISO 11357-4:2005 Plastics - Differential scanning calorimetry (DSC) - Part 4: Determination of specific heat capacity
ISO 11357-4:2014 Plastics - Differential scanning calorimetry (DSC) - Part 4: Determination of specific heat capacity
ISO 11357-4:2021 Plastics - Differential scanning calorimetry (DSC) - Part 4: Determination of specific heat capacity
ISO 24144:2023 Thermal insulation — Test methods for specific heat capacity of thermal insulation for buildings in the high temperature range — Differential scanning calorimetry (DSC) method
ISO/TS 16491:2012 Guidelines for the evaluation of uncertainty of measurement in air conditioner and heat pump cooling and heating capacity tests

WRC - Welding Research Council, Heat capacity of tantalum

BULLETIN 302-1985 POSTWELD HEAT TREATMENT OF PRESSURE VESSELS ; RELAXATION STRESSES IN PRESSURE VESSELS ; A STUDY OF RESIDUAL STRESS IN PRESSURE VESSEL STEELS
BULLETIN 452-2000 RECOMMENDED PRACTICES FOR LOCAL HEATING OF WELDS IN PRESSURE VESSELS

IT-UNI, Heat capacity of tantalum

UNI EN ISO 11357-4:2021 Plastics - Differential scanning calorimetry (DSC) - Part 4: Determination of specific heat capacity

AT-OVE/ON, Heat capacity of tantalum

OVE EN IEC 60384-24:2020 Fixed capacitors for use in electronic equipment - Part 24: Sectional specification - Fixed tantalum electrolytic surface mount capacitors with conductive polymer solid electrolyte (IEC 40/2774/CDV) (english version)

AGMA - American Gear Manufacturers Association, Heat capacity of tantalum

ISO 14179-1:2004 Gear Reducers - Thermal Capacity Based on ISO/TR 14179-1

AT-ON, Heat capacity of tantalum

ONORM A 5523-1981 Packaging testing; Thermal shock fest on glass Containers
ONORM M 7521-1976 Room-heating capacity of stoves for solid and liquid fuels
ONORM ENV 821-3-1993 Advanced technical ceramics. Monolithic ceramics. Thermo-physical properties. Part 3: Determination of specific heat capacity
OENORM EN ISO 11357-4:2021 Plastics - Differential scanning calorimetry (DSC) - Part 4: Determination of specific heat capacity (ISO 11357-4:2021)

DE-GPVA, Heat capacity of tantalum

AD 2000-Merkblatt HP7/1-2000 Manufacture and testing of pressure vessels.Heat treatment.General principles
AD 2000-Merkblatt HP7/1-2014 Manufacture and testing of pressure vessels.Heat treatment.General principles
AD 2000-Merkblatt HP7/3-2001 Manufacture and testing of pressure vessels.Heat treatment.Austenitic steels

American Welding Society (AWS), Heat capacity of tantalum

WRC 452:2000 Recommended Practices For Local Heating Of Welds In Pressure Vessels

未注明发布机构, Heat capacity of tantalum

BS EN 130201:1995(1999) Specification for Harmonized system of quality assessment for electronic components — Blank detail specification — Fixed tantalum capacitors with solid electrolyte, porous anode (sub - family 3)
BS EN 1251-2:2000(2006) Cryogenic vessels — Transportable vacuum insulated vessels ofnot more than 1000 litres volume — Part 2 : Design, fabrication, inspection and testing

US-HHS, Heat capacity of tantalum

HHS 21 CFR PART 113-2011 THERMALLY PROCESSED LOW-ACID FOODS PACKAGED IN HERMETICALLY SEALED CONTAINERS

CH-SNV, Heat capacity of tantalum

SN EN ISO 11357-4:2021 Plastics - Differential scanning calorimetry (DSC) - Part 4: Determination of specific heat capacity (ISO 11357-4:2021)

PL-PKN, Heat capacity of tantalum

PN-EN ISO 11357-4-2021-07 E Plastics--Differential scanning calorimetry (DSC)--Part 4: Determination of specific heat capacity (ISO 11357-4:2021)