ZH
RU
ES

UV Spectroscopy Conditions

UV Spectroscopy Conditions, Total:244 items.

In the international standard classification, UV Spectroscopy Conditions involves: Protection against crime, Analytical chemistry, Solar energy engineering, Products of the chemical industry, Optoelectronics. Laser equipment, Jewellery, Optics and optical measurements, Education, Paper products, Protection against fire, Petroleum products in general, Fuels, Inks. Printing inks, Plastics, Edible oils and fats. Oilseeds, Electrical and electronic testing, Electronic component assemblies, Paints and varnishes, Physics. Chemistry, Housings, enclosures, other machine parts, Pipeline components and pipelines, Air quality, Photography, Waxes, bituminous materials and other petroleum products, Products of the textile industry, Power transmission and distribution networks, Construction materials, Road engineering, Testing of metals, Non-ferrous metals, Optical equipment, Organic chemicals, Water quality, Fibre optic communications, Medical equipment, Environmental protection, Ceramics, Thermodynamics and temperature measurements, Radiation measurements, Farming and forestry, Pulps, Paper and board, Seals, glands, Shafts and couplings.

International Commission on Illumination (CIE), UV Spectroscopy Conditions

CIE 151-2003 SPECTRAL WEIGHTING OF SOLAR ULTRAVIOLET RADIATION

国家市场监督管理总局、中国国家标准化管理委员会, UV Spectroscopy Conditions

GB/T 37074-2018 Technical requirements of ultraviolet excitation fluorescent anti-counterfeiting fiber
GB/T 37396.1-2019 Lasers and laser-related equipment—Standard optical components—Part 1: Components for the UV,visible and near-infrared spectral ranges
GB/T 41072-2021 Surface chemical analysis—Electron spectroscopies—Guidelines for ultraviolet photoelectron spectroscopy analysis
GB/T 39114-2020 Nanotechnologies—Characterization of single-wall carbon nanotubes using ultraviolet-visible-near infrared (UV-Vis-NIR) absorption spectroscopy
GB/T 24370-2021 Nanotechnologies—Characterization of cadmium chalcogenide colloidal quantum dot—UV-Vis absorption spectroscopy
GB/T 37186-2018 Gas analysis—Determination of sulfur dioxide and nitrogen oxides—Ultraviolet differential optical absorption spectroscopy
GB/T 37131-2018 Nanotechnologies—Test method of semiconductor nanopowder using UV-Vis diffuse reflectance spectroscopy
GB/T 37396.2-2019 Lasers and laser-related equipment—Standard optical components—Part 2: Components for the infrared spectral ranges

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, UV Spectroscopy Conditions

GB/T 25481-2010 On-line ultraviolet/visible spectrum analyzer
GB/T 19394-2003 UV test for Photovoltai (PV) modules
GB/T 42645-2023 Jewelry and Jade Identification by Ultraviolet-visible Absorption Spectroscopy
GB/T 13971-1992 Specification of ultra-violet gas analyzers
GB/T 13971-2013 Specification of ultraviolet gas analyzers
GB/T 18294.1-2001 Technical identification method for fire Part 1:Ultraviolet spectrum analysis
GB/T 18294.1-2013 Technical identification methods for fire.Part 1:Ultraviolet spectrometry
GB/T 24369.1-2009 Characterization of gold nanorods.Part 1:UV-Vis-NIR absorption spectroscopy
GB/T 17121-1997 Anti-counterfeiting stamp-ink. Part 1: Technical requirements of UV-excitation flourescent anti-counterfeiting stamp-ink
GB/T 17001.1-1997 Anti-counterfeiting ink. Part 1:Technical requirement of ultraviolet fluorecent ink
GB/T 24370-2009 Characterization of CdSe quantum dot nanocrystals.UV-Vis absorption spectroscopy
GB/T 11501-1989 Spectral conditions for measuring photography density
GB/T 19267.2-2008 Physical and chemical examination of trace evidence in forensic sciences.Part 2:Ultraviolet-visible absorption spectroscopy
GB/T 19267.2-2003 Physical and chemical examination of trace evidence in forensic sciences--Part 2: Ultraviolet-visible absorption spectroscopy
GB/T 11501-2008 Photography.Density measurement.Part 3:Spectral conditions

American Society for Testing and Materials (ASTM), UV Spectroscopy Conditions

ASTM E2193-16 Standard Test Method for Ultraviolet Transmittance of Monoethylene Glycol (using Ultraviolet Spectrophotometry)
ASTM E958-13(2021) Standard Practice for Estimation of the Spectral Bandwidth of Ultraviolet-Visible Spectrophotometers
ASTM E2193-04 Standard Test Method for Ultraviolet Transmittance of Monoethylene Glycol (Ultraviolet Spectrophotometric Method)
ASTM E2193-02a Standard Test Method for Ultraviolet Transmittance of Monoethylene Glycol (Ultraviolet Spectrophotometric Method)
ASTM E2193-02 Standard Test Method for Ultraviolet Transmittance of Monoethylene Glycol (Ultraviolet Spectrophotometric Method)
ASTM E2193-08 Standard Test Method for Ultraviolet Transmittance of Monoethylene Glycol (Ultraviolet Spectrophotometric Method)
ASTM E958-93(2005) Standard Practice for Measuring Practical Spectral Bandwidth of Ultraviolet-Visible Spectrophotometers
ASTM E958-13 Standard Practice for Estimation of the Spectral Bandwidth of Ultraviolet-Visible Spectrophotometers
ASTM E958-93(1999) Standard Practice for Measuring Practical Spectral Bandwidth of Ultraviolet-Visible Spectrophotometers
ASTM G177-03(2020) Standard Tables for Reference Solar Ultraviolet Spectral Distributions: Hemispherical on 37° Tilted Surface
ASTM E925-09(2022) Standard Practice for Monitoring the Calibration of Ultraviolet-Visible Spectrophotometers whose Spectral Bandwidth does not Exceed 2 nm
ASTM G177-03(2012) Standard Tables for Reference Solar Ultraviolet Spectral Distributions: Hemispherical on 37deg; Tilted Surface
ASTM E925-83(1994)e1 Standard Practice for Monitoring the Calibration of Ultraviolet-Visible Spectrophotometers whose Spectral Slit Width does not Exceed 2 nm
ASTM D4799/D4799M-08(2013)e1 Standard Practice for Accelerated Weathering Test Conditions and Procedures for Bituminous Materials (Fluorescent UV, Water Spray, and Condensation Method)
ASTM E925-02 Standard Practice for Monitoring the Calibration of Ultraviolet-Visible Spectrophotometers whose Spectral Slit Width does not Exceed 2 nm
ASTM E925-09 Standard Practice for Monitoring the Calibration of Ultraviolet-Visible Spectrophotometers whose Spectral Slit Width does not Exceed 2 nm
ASTM E925-09(2014) Standard Practice for Monitoring the Calibration of Ultraviolet-Visible Spectrophotometers whose Spectral Bandwidth does not Exceed 2 nm
ASTM G130-95(2002) Standard Test Method for Calibration of Narrow- and Broad-Band Ultraviolet Radiometers Using a Spectroradiometer
ASTM G130-95 Standard Test Method for Calibration of Narrow- and Broad-Band Ultraviolet Radiometers Using a Spectroradiometer
ASTM G130-06 Standard Test Method for Calibration of Narrow- and Broad-Band Ultraviolet Radiometers Using a Spectroradiometer
ASTM G130-12(2020) Standard Test Method for Calibration of Narrow- and Broad-Band Ultraviolet Radiometers Using a Spectroradiometer
ASTM D4799/D4799M-17(2023) Standard Practice for Accelerated Weathering Test Conditions and Procedures for Bituminous Materials (Fluorescent UV, Water Spray, and Condensation Method)
ASTM D4799/D4799M-17 Standard Practice for Accelerated Weathering Test Conditions and Procedures for Bituminous Materials (Fluorescent UV, Water Spray, and Condensation Method)
ASTM G177-03 Standard Tables for Reference Solar Ultraviolet Spectral Distributions: Hemispherical on 37 Tilted Surface
ASTM G177-03e1 Standard Tables for Reference Solar Ultraviolet Spectral Distributions: Hemispherical on 37 Tilted Surface
ASTM G177-03(2008)e1 Standard Tables for Reference Solar Ultraviolet Spectral Distributions: Hemispherical on 37x00B0; Tilted Surface
ASTM G130-12 Standard Test Method for Calibration of Narrow- and Broad-Band Ultraviolet Radiometers Using a Spectroradiometer
ASTM D8369-21 Standard Test Method for Detailed Hydrocarbon Analysis by High Resolution Gas Chromatography with Vacuum Ultraviolet Absorption Spectroscopy (GC-VUV)
ASTM D836-77 Standard test method for detailed analysis of hydrocarbons by high-resolution gas chromatography using vacuum ultraviolet absorption spectrometry (GC-VUV)
ASTM D836-84 Standard test method for detailed analysis of hydrocarbons by high-resolution gas chromatography using vacuum ultraviolet absorption spectrometry (GC-VUV)
ASTM D8519-23 Standard Test Method for Determination of Hydrocarbon Types in Waste Plastic Process Oil Using Gas Chromatography with Vacuum Ultraviolet Absorption Spectroscopy Detection (GC-VUV)
ASTM D8267-19 Standard Test Method for Determination of Saturated Hydrocarbon, Aromatic, and Diaromatic Content of Aviation Turbine Fuels Using Gas Chromatography with Vacuum Ultraviolet Absorption Spectroscopy Det
ASTM D8368-21 Standard Test Method for Determination of Totals of Saturate, Aromatic, Polyaromatic and Fatty Acid Methyl Esters (FAME) Content of Diesel Fuel Using Gas Chromatography with Vacuum Ultraviolet Absorption Spectroscopy Detection (GC-VUV)
ASTM D8368-22 Standard Test Method for Determination of Totals of Aromatic, Polyaromatic and Fatty Acid Methyl Esters (FAME) Content of Diesel Fuel Using Gas Chromatography with Vacuum Ultraviolet Absorption Spectr
ASTM D8368-22a Standard Test Method for Determination of Totals of Aromatic, Polyaromatic and Fatty Acid Methyl Esters (FAME) Content of Diesel Fuel Using Gas Chromatography with Vacuum Ultraviolet Absorption Spectr

Indonesia Standards, UV Spectroscopy Conditions

SNI 04-6533-2001 UV tests for photovoltaic (PV) moduls

International Electrotechnical Commission (IEC), UV Spectroscopy Conditions

IEC 61345:1998 UV test for photovoltaic (PV) modules

AENOR, UV Spectroscopy Conditions

UNE-ISO 4735:2009 Oils of Citrus. Determination of CD value by ultraviolet espectrometric analysis
UNE 77401:1992 ECOTOXICOLOGY. DETERMINATION OF UV-VIS ABSORPTION SPECTRA.
UNE-EN ISO 11997-2:2014 Paints and varnishes - Determination of resistance to cyclic corrosion conditions - Part 2: Wet (salt fog)/dry/humidity/UV light (ISO 11997-2:2013)

Korean Agency for Technology and Standards (KATS), UV Spectroscopy Conditions

KS H ISO 4735-2014(2019) Oils of Citrus－Determination of CD value by ultraviolet spectrometric analysis
KS B ISO 11151-1:2013 Lasers and laser-related equipment ?; Standard optical components ?; Part 1: Components for the UV, visible and near-infrared spectral ranges
KS B ISO 11151-1:2003 Lasers and laser-related equipment-Standard optical components-Part 1:Components for the UV, visible and near-infrared spectral ranges
KS B ISO 11151-1:2015 Lasers and laser-related equipment ― Standard optical components ― Part 1: Components for the UV, visible and near-infrared spectral ranges
KS B ISO 11151-1-2015(2020) Lasers and laser-related equipment ― Standard optical components ― Part 1: Components for the UV, visible and near-infrared spectral ranges
KS C IEC 61345-2002(2022) UV test for photovoltaic(PV) modules
KS M ISO 8580:2009 Rubber and plastics hoses－Determination of ultra-violet resistance under static conditions
KS M ISO 8580:2013 Rubber and plastics hoses－Determination of ultra-violet resistance under static conditions
KS D 2717-2008(2018) Evaluation of metallic/semiconducting ratio of single-walled carbon nanotube soots using UV-VIS－NIR absorption spectroscopy
KS M 9102-1996 Water quality-Determination of total mercury by flameless atomic absorption spectrometry(Method after pretreatment with ultraviolet radiation)
KS B ISO 11151-2:2003 Lasers and laser-related equipment-Standard optical components-Part 2:Components for the infrared spectral range
KS B ISO 11151-2:2013 Lasers and laser-related equipment ?; Standard optical components ?; Part 2: Components for the infrared spectral range
KS B ISO 11151-2:2015 Lasers and laser-related equipment ― Standard optical components ― Part 2: Components for the infrared spectral range
KS A ISO 5-3:2011 Photography and graphic technology－Density measurements－Part 3：Spectral conditions
KS B ISO 11151-2-2015(2020) Lasers and laser-related equipment ― Standard optical components ― Part 2: Components for the infrared spectral range
KS M 9102-1996(2001) WATER QUALITY-DETERMINATION OF TOTAL MERCURY BY FLAMELESS ATOMIC ABSORPTION SPECTROMETRY(METHOD AFTER PRETREATMENT WITH ULTRAVIOLET RADITION)
KS M ISO 11997-2-2014(2019) Paints and varnishes — Determination of resistance to cyclic corrosion conditions — Part 2: Wet(salt fog)/dry/humidity/UV light
KS A ISO 5-3-2011(2016) Photography and graphic technology－Density measurements－Part 3：Spectral conditions
KS A ISO 5-3-2011(2021) Photography and graphic technology－Density measurements－Part 3：Spectral conditions
KS B ISO 10109-11-2006(2016) Optics and optical instruments — Environmental requirements —Part 11: Optical instruments for outdoor conditions of use
KS B ISO 10109-11-2006(2021) Optics and optical instruments — Environmental requirements —Part 11: Optical instruments for outdoor conditions of use
KS B ISO 10109-11:2006 Optics and optical instruments－Environmental requirements－Part 11：Optical instruments for outdoor conditions of use

British Standards Institution (BSI), UV Spectroscopy Conditions

BS EN ISO 11151-1:2000 Lasers and laser-related equipment. Standard optical components. Components for the UV, visible and near-infrared spectral ranges
BS EN ISO 11151-1:2015 Lasers and laser-related equipment. Standard optical components. Components for the UV, visible and near-infrared spectral ranges
BS PD ISO/TS 17466:2015 Use of UV-Vis absorption spectroscopy in the characterization of cadmium chalcogenide colloidal quantum dots
PD ISO/TS 17466:2015 Use of UV-Vis absorption spectroscopy in the characterization of cadmium chalcogenide colloidal quantum dots
BS EN 17178:2019 Liquid petroleum products. Determination of the total volatile sulfur content in liquefied petroleum gases by ultraviolet fluorescence spectroscopy
BS EN ISO 11151-2:2000 Lasers and laser-related equipment. Standard optical components. Components for the infrared spectral range
BS EN ISO 11151-2:2015 Lasers and laser-related equipment. Standard optical components. Components for the infrared spectral range
PD ISO/TS 10868:2017 Tracked Changes. Nanotechnologies. Characterization of single-wall carbon nanotubes using ultraviolet-visible-near infrared (UV-Vis-NIR) absorption spectroscopy
BS ISO 5-3:2010 Photography and graphic technology. Density measurements Spectral conditions
BS ISO 5-3:2009 Photography and graphic technology - Density measurements - Spectral conditions
BS ISO 5-3:1996 Photography - Density measurements - Spectral conditions
BS ISO 22576:2020 Optics and photonics. Optical materials and components. Specification of calcium fluoride used in the infrared spectrum
BS ISO 10109-11:2001 Optics and optical instruments - Environmental requirements - Optical instruments for outdoor conditions of use
BS ISO 19741:2018 Optics and photonics. Optical materials and components. Test method for striae in infrared optical materials
19/30362632 DC BS ISO 22576. Optics and photonics. Optical materials and components. Specification of calcium fluoride used in the infrared spectrum
BS 3900-F19:2000 Methods of test for paint - Durability tests on paint films - Determination of resistance to cyclic corrosion conditions - Wet (salt fog)/dry/humidity/UV light - Part F19: Determination of resistance to cyclic corrosion conditions - Wet (salt fog)/dry/hum
BS 2782-5 Method 540C:1988 Methods of testing plastics - Optical and colour properties, weathering - Determination of ultraviolet radiation intensity using polysulphone film
BS ISO 11382:2011 Optics and photonics. Optical materials and components. Characterization of optical materials used in the infrared spectral range from 0,78 $Gmm to 25 $Gmm
BS ISO 2470-2:2009 Paper, board and pulps. Measurement of diffuse blue reflectance factor. Outdoor daylight conditions (D65 brightness)
BS ISO 2470-2:2008 Paper, board and pulps - Measurement of diffuse blue reflectance factor - Outdoor daylight conditions (D65 brightness)
22/30444633 DC BS ISO 11382. Optics and photonics. Optical materials and components. Characterization of optical materials used in the infrared spectral range from 0,78 µm to 25 µm
BS ISO 5631-2:2014 Paper and board. Determination of colour by diffuse reflectance. Outdoor daylight conditions (D65/10)
BS ISO 5631-2:2015 Paper and board. Determination of colour by diffuse reflectance. Outdoor daylight conditions (D65/10)
BS ISO 5631-2:2009 Paper and board. Determination of colour by diffuse reflectance. Outdoor daylight conditions (D65/10°)
BS ISO 11382:2022 Optics and photonics. Optical materials and components. Characterization of optical materials used in the infrared spectral range from 0,78 µm to 25 µm

Group Standards of the People's Republic of China, UV Spectroscopy Conditions

T/CAQI 74-2019 Jewelry and jade identification by ultraviolet-visible spectroscopy
T/ZSA 39-2020 Characterization of Graphene - Work function - Ultraviolet photoelectron spectroscopy (UPS) method
T/ZGIA 002-2020 Graphene Test Methods Determination of Work Function Ultraviolet Photoelectron Spectroscopy
T/GBG 0010-2018 LED Lighting Standard Optical Component Interface and Performance Requirements: Ultraviolet 3535 Packaged Devices
T/CASME 370-2023 General technical specifications of fiber laser housing

Professional Standard - Education, UV Spectroscopy Conditions

JY/T 022-1996 General rules for ultraviolet and visible absorption spectroscopic methods
JY/T 0570-2020 General rules for ultraviolet and visible absorption spectrometry

Shandong Provincial Standard of the People's Republic of China, UV Spectroscopy Conditions

DB37/T 4115-2020 Jewelry and jade identification by ultraviolet-visible spectroscopy
DB37/T 3786-2019 Determination of gaseous pollutants such as hydrogen sulfide in ambient air Open path ultraviolet absorption spectrometry

International Organization for Standardization (ISO), UV Spectroscopy Conditions

ISO 11151-1:2000 Lasers and laser-related equipment - Standard optical components - Part 1: Components for the UV, visible and near-infrared spectral ranges
ISO 11151-1:2015 Lasers and laser-related equipment - Standard optical components - Part 1: Components for the UV, visible and near-infrared spectral ranges
ISO 3656:2011/Amd 1:2017 Animal and vegetable fats and oils - Determination of ultraviolet absorbance expressed as specific UV extinction; Amendment 1
ISO/TS 17466:2015 Use of UV-Vis absorption spectroscopy in the characterization of cadmium chalcogenide colloidal quantum dots
ISO/TS 10868:2011 Nanotechnologies - Characterization of single-wall carbon nanotubes using ultraviolet-visible-near infrared (UV-Vis-NIR) absorption spectroscopy
ISO/TS 10868:2017 Nanotechnologies - Characterization of single-wall carbon nanotubes using ultraviolet-visible-near infrared (UV-Vis-NIR) absorption spectroscopy
ISO 11151-2:2000 Lasers and laser-related equipment - Standard optical components - Part 2: Components for the infrared spectral range
ISO 11151-2:2015 Lasers and laser-related equipment - Standard optical components - Part 2: Components for the infrared spectral range
ISO 5-3:2009 Photography and graphic technology - Density measurements - Part 3: Spectral conditions
ISO 5-3:1995 Photography - Density measurements - Part 3: Spectral conditions
ISO 22576:2020 Optics and photonics — Optical materials and components — Specification of calcium fluoride used in the infrared spectrum
ISO/DIS 8237:2014 Optics and photonics — Optical materials and components — Specification of chalcogenide glass used in the infrared spectrum
ISO 5-3:1984 Photography; Density measurements; Part 3 : Spectral conditions
ISO 5666-2:1983 Water quality; Determination of total mercury by flameless atomic absorption spectrometry; Part 2: Method after pretreatment with ultraviolet radiation
ISO 19741:2018 Optics and photonics — Optical materials and components — Test method for striae in infrared optical materials
ISO 29441:2010 Water quality - Determination of total nitrogen after UV digestion - Method using flow analysis (CFA and FIA) and spectrometric detection
ISO 11382:2022 Optics and photonics — Optical materials and components — Characterization of optical materials used in the infrared spectral range from 0,78 μm to 25 μm
ISO 10109-11:2001 Optics and optical instruments - Environmental requirements - Part 11: Optical instruments for outdoor conditions of use

German Institute for Standardization, UV Spectroscopy Conditions

DIN EN ISO 11151-1:2000 Lasers and laser-related equipment - Standard optical components - Part 1: Components for the ultraviolet, visible and near-infrared spectral range (ISO 11151-1:2000); German version EN ISO 11151-1:2000
DIN EN ISO 11151-1:2015-12 Lasers and laser-related equipment - Standard optical components - Part 1: Components for the UV, visible and near-infrared spectral ranges (ISO 11151-1:2015); German version EN ISO 11151-1:2015
DIN EN ISO 11151-1:2015 Lasers and laser-related equipment - Standard optical components - Part 1: Components for the UV, visible and near-infrared spectral ranges (ISO 11151-1:2015); German version EN ISO 11151-1:2015
DIN EN 17178:2018 Liquid petroleum products - Determination of the total volatile sulfur content in liquefied petroleum gases by ultraviolet fluorescence spectroscopy; German and English version prEN 17178:2018
DIN EN 17178:2019 Liquid petroleum products - Determination of the total volatile sulfur content in liquefied petroleum gases by ultraviolet fluorescence spectroscopy
DIN EN 17178:2019-12 Liquid petroleum products - Determination of the total volatile sulfur content in liquefied petroleum gases by ultraviolet fluorescence spectroscopy; German version EN 17178:2019
DIN 4512-9:1993 Photographic sensitometry, determination of optical density; spectral conditions
DIN EN ISO 11151-2:2000 Lasers and laser-related equipment - Standard optical components - Part 2: Components for the infrared spectral range (ISO 11151-2:2000); German version EN ISO 11151-2:2000
DIN EN ISO 16474-3:2014 Paints and varnishes - Methods of exposure to laboratory light sources - Part 3: Fluorescent UV lamps (ISO 16474-3:2013); German version EN ISO 16474-3:2013
DIN EN ISO 16474-3:2021 Paints and varnishes - Methods of exposure to laboratory light sources - Part 3: Fluorescent UV lamps (ISO 16474-3:2021); German version EN ISO 16474-3:2021
DIN EN ISO 11151-2:2015-12 Lasers and laser-related equipment - Standard optical components - Part 2: Components for the infrared spectral range (ISO 11151-2:2015); German version EN ISO 11151-2:2015
DIN EN ISO 11997-2:2013-12 Paints and varnishes - Determination of resistance to cyclic corrosion conditions - Part 2: Wet (salt fog)/dry/humidity/UV light (ISO 11997-2:2013); German version EN ISO 11997-2:2013
DIN EN ISO 11997-2:2013 Paints and varnishes - Determination of resistance to cyclic corrosion conditions - Part 2: Wet (salt fog)/dry/humidity/UV light (ISO 11997-2:2013); German version EN ISO 11997-2:2013
DIN 38404-3:2005 German standard methods for the examination of water, waste water and sludge - Physical and physicochemical parameters (group C) - Part 3: Determination of spectral absorption in the UV range, Spectral absorptions coefficient (C 3)
DIN EN ISO 11151-2:2015 Lasers and laser-related equipment - Standard optical components - Part 2: Components for the infrared spectral range (ISO 11151-2:2015); German version EN ISO 11151-2:2015
DIN 3761-14:1984 Rotary shaft lip type seals for automobils; test; infrared-spectroscopic analysis of elastomers
DIN ISO 10109-11:2002 Optics and optical instruments - Environmental requirements - Part 11: Optical instruments for outdoor conditions of use (ISO 10109-11:2001)
DIN EN 12396-3:2000-10 Non-fatty foods - Determination of dithiocarbamate and thiuram disulfide residues - Part 3: UV-spectrometric xanthogenate method; German version EN 12396-3:2000

Danish Standards Foundation, UV Spectroscopy Conditions

DS/EN ISO 11151-1:2000 Lasers and laser-related equipment - Standard optical components - Part 1: Components for the UV, visible and near-infrared spectral ranges
DS/CEN/CR 13840:2000 Petroleum products - Determination of polycyclic aromatic hydrocarbons - Ultraviolet (UV) spectrometric method
DS/ISO/TS 10868:2011 Nanotechnologies - Characterization of single-wall carbon nanotubes using ultraviolet-visible-near infrared (UV-Vis-NIR) absorption spectroscopy
DS/EN ISO 8580:1995 Rubber and plastics hoses - Determination of ultraviolet resistance under static conditions
DS/EN ISO 11151-2:2000 Lasers and laser-related equipment - Standard optical components - Part 2: Components for the infrared spectral range
DS/ISO 29441:2010 Water quality - Determination of total nitrogen after UV digestion - Method using flow analysis (CFA and FIA) and spectrometric detection
DS/EN ISO 11997-2:2013 Paints and varnishes - Determination of resistance to cyclic corrosion conditions - Part 2: Wet (salt fog)/dry/humidity/UV light

Association Francaise de Normalisation, UV Spectroscopy Conditions

NF S10-111-1*NF EN ISO 11151-1:2015 Lasers and laser-related equipment - Standard optical components - Part 1 : components for the UV, visible and near-infrared spectral ranges
NF EN ISO 11151-1:2015 Lasers et équipements associés aux lasers - Composants optiques standards - Partie 1 : composants pour les plages spectrales UV, visible et proche de l'infrarouge
NF S10-111-1:2001 Laser and laser-related equipment - Standard optical components - Part 1 : components for the UV, visible and near-infrared spectral ranges.
NF ISO 4735:2002 Huiles essentielles de Citrus - Détermination de la valeur CD par analyse spectrométrique dans l'ultraviolet
NF ISO 10640:2011 Plastiques - Méthodologie d'évaluation du photovieillissement des polymères par spectroscopie IRTF et UV/visible
NF EN 17178:2019 Produits pétroliers liquides - Détermination de la teneur en soufre volatil dans les gaz de pétrole liquéfiés par spectroscopie de fluorescence ultra-violette
NF X41-004-2*NF EN ISO 11997-2:2013 Paints and varnishes - Determination of resistance to cyclic corrosion conditions - Part 2: wet (salt fog)/dry/humidity/UV light
NF M41-027*NF EN 17178:2019 Liquid petroleum products - Determination of the total volatile sulfur content in liquefied petroleum gases by ultraviolet fluorescence spectroscopy
NF T51-182*NF ISO 10640:2011 Plastics - Methodology for assessing polymer photoageing by FTIR and UV/visible spectroscopy.
FD M07-170:2018 Produits pétroliers - Détermination de la teneur en colorants et traceur fiscaux - Méthode par chromatographie liquide haute performance et détection par spectrométrie UV-Visible
NF EN ISO 11151-2:2015 Lasers et équipements associés aux lasers - Composants optiques standards - Partie 2 : composants pour la plage spectrale infrarouge
NF S10-111-2:2001 Lasers and laser-related equipment - Standard optical components - Part 2 : components for the infrared spectral range.
NF S10-111-2*NF EN ISO 11151-2:2015 Lasers and laser-related equipment - Standard optical components - Part 2 : components for the infrared spectral range
NF M07-073:2001 Petroleum products - Determination of the content of total aromatic hydrocarbons in saturated fractions - Ultra-Violet absorbance spectrometric method for low contents.
NF EN ISO 11997-2:2013 Peintures et vernis - Détermination de la résistance aux conditions de corrosion cyclique - Partie 2 : brouillard salin/sécheresse/humidité/lumière UV
XP M07-113:2003 Produits pétroliers - Détermination de la teneur en traceur Solvent Yellow 124 dans les distillats moyens - Méthode par chromatographie liquide à haute performance avec détection par spectrophotométrie UV-Visible
NF V03-091-3*NF EN 12396-3:2000 Non-fatty foods - Determination of dithiocarbamate and thiuram disulfide residues - Part 3 : UV spectrometric xanthogenate method

Professional Standard - Agriculture, UV Spectroscopy Conditions

772兽药典二部-2015 Appendix Contents 0400 Spectroscopy 0401 UV-Vis Spectrophotometry
775兽药典一部-2015 Appendix Contents 0400 Spectroscopy 0401 UV-Vis Spectrophotometry
JJG(教委) 022-1996 Verification Regulations for Ultraviolet and Visible Absorption Spectrometers

ES-UNE, UV Spectroscopy Conditions

UNE-EN ISO 11151-1:2015 Lasers and laser-related equipment - Standard optical components - Part 1: Components for the UV, visible and near-infrared spectral ranges (ISO 11151-1:2015)
UNE-EN 17178:2020 Liquid petroleum products - Determination of the total volatile sulfur content in liquefied petroleum gases by ultraviolet fluorescence spectroscopy
UNE-EN ISO 11151-2:2015 Lasers and laser-related equipment - Standard optical components - Part 2: Components for the infrared spectral range (ISO 11151-2:2015)

NL-NEN, UV Spectroscopy Conditions

NEN 6306-1990 Vegetable and animal oils and fats Determination of extinction co?ffici?nt in the ultraviolet spectre

Professional Standard - Medicine, UV Spectroscopy Conditions

YY 91060-1999 Vocabulary of biochemical instruments.UV-VIS spectrophotometry

Lithuanian Standards Office , UV Spectroscopy Conditions

LST EN ISO 11151-1:2002 Laser and laser-related equipment - Standard optical components - Part 1: Components for the UV, visible and near-infrared spectral ranges (ISO 11151-1:2000)
LST EN ISO 11151-2:2002 Lasers and laser-related equipment - Standard optical components - Part 2: Components for the infrared spectral range (ISO 11151-2:2000)
LST EN ISO 11985:2000 Ophthalmic optics - Contact lenses - Ageing by exposure to UV and visible radiation (in vitro method) (ISO 11985:1997)
LST EN ISO 11151-2:2015 Lasers and laser-related equipment - Standard optical components - Part 2: Components for the infrared spectral range (ISO 11151-2:2015)
LST EN ISO 11997-2:2006 Paints and varnishes - Determination of resistance to cyclic corrosion conditions - Part 2: Wet (salt fog)/dry/humidity/UV light (ISO 11997-2:2000)

Military Standard of the People's Republic of China-General Armament Department, UV Spectroscopy Conditions

GJB 506-1988 Testing method for spectral performance of UV filter quartz glass tubes

European Committee for Electrotechnical Standardization（CENELEC）, UV Spectroscopy Conditions

EN 61345:1998 UV Test for Photovoltaic (PV) Modules

European Committee for Standardization (CEN), UV Spectroscopy Conditions

EN ISO 11151-1:2000 Lasers and Laser-Related Equipment - Standard Optical Components - Part 1: Components for the UV, Visible and Near-Infrared Spectral Ranges ISO 11151-1: 2000
EN ISO 11151-1:2015 Lasers and laser-related equipment - Standard optical components - Part 1: Components for the UV, visible and near-infrared spectral ranges (ISO 11151-1:2015)
EN ISO 3656:2011/A1:2017 Animal and vegetable fats and oils - Determination of ultraviolet absorbance expressed as specific UV extinction - Amendment 1 (ISO 3656:2011/Amd 1:2017)
EN ISO 11997-2:2013 Paints and varnishes - Determination of resistance to cyclic corrosion conditions - Part 2: Wet (salt fog)/dry/humidity/UV light
EN ISO 11151-2:2000 Lasers and Laser-Related Equipment - Standard Optical Components - Part 2: Components for the Infrared Spectral Range ISO 11151-2: 2000
EN ISO 11151-2:2015 Lasers and laser-related equipment - Standard optical components - Part 2: Components for the infrared spectral range (ISO 11151-2:2015)
prEN 25666-2-1992 Water quality; determination of total mercury by flameless atomic absorption spectrometry; part 2: method after pretreatment with ultraviolet radiation (ISO 5666-2:1983)
EN 14212:2012/AC:2014 Ambient air - Standard method for the measurement of the concentration of sulphur dioxide by ultraviolet fluorescence

海关总署, UV Spectroscopy Conditions

SN/T 5153-2019 Determination of fluorescent whitening agent content in household paper by UV spectroscopy

Taiwan Provincial Standard of the People's Republic of China, UV Spectroscopy Conditions

CNS 14247-1998 Method of test for naphthalene hydrocarbons in aviation turbine fuels by ultravioet spectrophotometry
CNS 11993-1987 Method of Test for Fiber Optic Devices (FOTP-50 Light-Launch Conditions for Long Length Graded-Index Optical Fiber Spectral Attenuation Measurement)

National Metrological Technical Specifications of the People's Republic of China, UV Spectroscopy Conditions

JJF 2062-2023 Calibration Specification for Ultraviolet Test Chambers of Photovoltaic Modules

ES-AENOR, UV Spectroscopy Conditions

UNE 77-401-1992 Ecotoxicology. Determination of UV-VIS absorption spectra of a chemical compoud

Professional Standard - Chemical Industry, UV Spectroscopy Conditions

HG/T 3027-1988(1997) Determination of plasticizer content in polymethylmethacrylate-Ultraviolet spectrometry method
HG/T 3027-1988 Determination of plasticizer content in polymethylmethacrylate-Ultraviolet spectrometry method
HG/T 4952-2016 Determination of ultraviolet absorbent for TAC film by High Performance Liquid Chromatographic method

RU-GOST R, UV Spectroscopy Conditions

GOST 20428-1975 Organic dye-stuffs. Direct red-violet CB-2KM. Specifications
GOST R 59422.1-2021 Optics and photonics. Lasers and laser-related equipment. Standard optical elements. Part 1. Standard optical elements for laser equipment operating in the ultraviolet, visible and near-infrared spectral ranges. General technical requirements
GOST 21195-1984 Spectral high-intensity gas-discharge sources of optical radiation. General specifications
GOST 8.410-1981 State system for ensuring the uniformity of measurements. State verification schedule for means measuring plasma temperature of 10000-15000 K in the visible and ultraviolet

YU-JUS, UV Spectroscopy Conditions

JUS E.K8.051-2000 Edible olive oil and edible olive-pomace oil - Determination of ultraviolet absorbance
JUS N.M1.030-1983 Safety requirements. Appliances for skin treatment by ultra-violet and infra-red radiation. Particular technical conditions and tests

Professional Standard - Public Safety Standards, UV Spectroscopy Conditions

GA/T 1447-2017 Technical Specifications for Ultraviolet Photoluminescence Inspection of Documents Altered by Forensic Science

KR-KS, UV Spectroscopy Conditions

KS M ISO 8580-2009 Rubber and plastics hoses－Determination of ultra-violet resistance under static conditions
KS B ISO 10109-11-2023 Optics and optical instruments — Environmental requirements — Part 11: Optical instruments for outdoor conditions of use

PH-BPS, UV Spectroscopy Conditions

PNS ISO/TS 17466:2021 Use of UV-Vis absorption spectroscopy in the characterization of cadmium chalcogenide colloidal quantum dots

CEN - European Committee for Standardization, UV Spectroscopy Conditions

PREN 17178-2018 Liquid petroleum products - Determination of the total volatile sulfur content in liquefied petroleum gases by ultraviolet fluorescence spectroscopy

PL-PKN, UV Spectroscopy Conditions

PN-EN 17178-2020-01 P Liquid petroleum products--Determination of the total volatile sulfur content in liquefied petroleum gases by ultraviolet fluorescence spectroscopy

国家质量监督检验检疫总局, UV Spectroscopy Conditions

SN/T 4668-2016 Qualitative Analysis of Imported and Exported Textile Fibers by UV Diffuse Reflectance Spectrometry of Natural Colored Cotton

SE-SIS, UV Spectroscopy Conditions

SIS SS-ISO 8580:1990 Rubber and plastics hoses — Determinationof ultra-violet resistance under static condi- tions

未注明发布机构, UV Spectroscopy Conditions

BS EN ISO 8580:1995(2000) Rubber and plastics hoses — Determination of ultra - violet resistance under static conditions

Professional Standard - Electricity, UV Spectroscopy Conditions

DL/T 1779-2017 Specifications for ultraviolet imager for corona discharge detection of high-voltage electrical equipment

Professional Standard - Aerospace, UV Spectroscopy Conditions

QJ 1697-1989 General Specifications for Infrared Interference Filters
QJ 1925-1990 233K photoconductive indium antimonide infrared detector technical conditions
QJ 2462-1993 Technical conditions of multiple linear photovoltaic indium antimonide infrared detectors

Japanese Industrial Standards Committee (JISC), UV Spectroscopy Conditions

JIS H 1183 AMD 1:2012 Method for emission spectrochemical analysis of silver bullion (Amendment 1)
JIS K 7653:1988 Photography -- Density measurements -- Part 3: Spectral conditions
JIS R 1694:2012 Measurement of spectral transmittance of fine ceramic thin films under humid condition
JIS R 1698:2015 Measurement of spectral reflectance of fine ceramics thin films under humid condition

AT-ON, UV Spectroscopy Conditions

ONORM ISO 5666 Teil.2:1984 Water quality; determination of total mercury by flameless atomic absorption spectrometry; method after pretreatment with ultraviolett radiation

American National Standards Institute （ANSI), UV Spectroscopy Conditions

ANSI/TIA/EIA 455-50B-1998 Light Launch Conditions for Long Length Graded-Index Optical Fiber Spectral Attenuation Measurements

Professional Standard - Petroleum, UV Spectroscopy Conditions

SY/T 6009.9-2003 Test method of samples of geochemical exploration for oil and gas Part 9:Determination of the gross amount of aromatic hydrocarbons and their ramifications Ultraviolet spectroscopy

Gansu Provincial Standard of the People's Republic of China, UV Spectroscopy Conditions

DB62/T 2574-2015 General technical specifications for solar photovoltaic outdoor lighting devices

Heilongjiang Provincial Standard of the People's Republic of China, UV Spectroscopy Conditions

DB23/T 3306-2022 Specifications for restrictive light conditions of urban outdoor LED advertising screens

TIA - Telecommunications Industry Association, UV Spectroscopy Conditions

455-50A-1987 FOTP-50 Light Launch Conditions for Long-Length Graded-Index Optical Fiber Spectral Attenuation Measurements
TIA/EIA-455-50B-1998 FOTP-50 Light Launch Conditions for Long-Length Graded-Index Optical Fiber Spectral Attenuation Measurements

Society of Motion Picture and Television Engineers (SMPTE), UV Spectroscopy Conditions

SMPTE RP 180-1999 Spectral Conditions Defining Printing Density in Motion-Picture Negative and Intermediate Films

农业农村部, UV Spectroscopy Conditions

NY/T 3284-2018 Operating procedures for Fourier transform attenuated total reflection infrared spectrum strip set of pesticide solid preparations

Professional Standard - Military and Civilian Products, UV Spectroscopy Conditions

WJ 1099-1979 Smooth surface gauge and technical conditions Spring outer diameter snap gauge (D=3~30mm) (restricted standard)