ZH
RU
ES

Flow rate + peak area

Flow rate + peak area, Total:221 items.

In the international standard classification, Flow rate + peak area involves: Measurement of fluid flow, Metrology and measurement in general, Pipeline components and pipelines, Vacuum technology, Lubricants, industrial oils and related products, Plastics, Rubber, Air quality, Geology. Meteorology. Hydrology, Paper and board, Tea. Coffee. Cocoa, Fluid power systems, On-board equipment and instruments, Pumps, Products of the chemical industry, Astronomy. Geodesy. Geography, Paints and varnishes, Farming and forestry.

TR-TSE, Flow rate + peak area

TS 2236-1976 LIQUID FLOLW MEASUREMENT ?N ?PEN CHANNELS VELOCITY - AREA METHODS
TS 3072-1978 Measurement Of Clean Water Flow In Closed Conduits - Velocity - Area Method Using Current - Meters
TS 1857-1975 LIQUID FLOW MEASUREMENT ?N ?PEN CHANNELS — VELOCITY - AREA METHODS — COLLECTION OF DATA FOR DETERMINATION OF ERRORS ?N MEASUREMENT
TS 3417-1979 MEASUREMENT OP FLUID PLOW IN CLOSED CONDUITS - VELOCITY AREA METHOD USING PITOT STATIC TUBES

International Organization for Standardization (ISO), Flow rate + peak area

ISO 748:1973 Title missing - Legacy paper document
ISO 748:1979 Liquid flow measurement in open channels; Velocity-area methods
ISO 3354:1975 Measurement of clean water flow in closed conduits — Velocity-area method using current-meters
ISO/TR 7178:1983 Liquid flow measurement in open channels; Velocity-area methods; Investigation of total error
ISO 1088:1985 Liquid flow measurement in open channels; Velocity-area methods; Collection and processing of data for determination of errors in measurement
ISO 3966:1977 Measurement of fluid flow in closed conduits; Velocity area method using Pitot static tubes
ISO/TR 9823:1990 Liquid flow measurement in open channels; velocity-area method using a restricted number of verticals
ISO 3966:2020 Measurement of fluid flow in closed conduits — Velocity area method using Pitot static tubes
ISO 3354:1988 Measurement of clean water flow in closed conduits; velocity-area method using current-meters in full conduits and under regular flow conditions
ISO 748:2021 Hydrometry — Measurement of liquid flow in open channels — Velocity area methods using point velocity measurements
ISO 1607-1:1993 Positive-displacement vacuum pumps; measurement of performance characteristics; part 1: measurement of volume rate of flow (pumping speed)
ISO 1133:1991 Plastics; determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics
ISO 7194:1983 Measurement of fluid flow in closed conduits; Velocity-area methods of flow measurement in swirling or asymmetric flow conditions in circular ducts by means of current-meters or Pitot static tubes
ISO 3966:2008 Measurement of fluid flow in closed conduits - Velocity area method using Pitot static tubes
ISO 1088:1973 Liquid flow measurement in open channels — Velocity-area methods — Collection of data for determination of errors in measurement
ISO 1070:1992 Liquid flow measurement in open channels; slope-area method
ISO 3354:2008 Measurement of clean water flow in closed conduits - Velocity-area method using current-meters in full conduits and under regular flow conditions
ISO 1133:2005 Plastics - Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics
ISO 1070:1973 Liquid flow measurement in open channels — Slope-area method
ISO 1133:1997 Plastics - Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics
ISO 7194:2008 Measurement of fluid flow in closed conduits - Velocity-area methods of flow measurement in swirling or asymmetric flow conditions in circular ducts by means of current-meters or Pitot static tubes
ISO 7145:1982 Determination of flowrate of fluids in closed conduits of circular cross-section; Method of velocity measurement at one point of the cross-section
ISO 1608-1:1993 Vapour vacuum pumps; measurement of performance characteristics; part 1: measurement of volume rate of flow (pumping speed)
ISO 1088:2007 Hydrometry - Velocity-area methods using current-meters - Collection and processing of data for determination of uncertainties in flow measurement
ISO 1608-1:1980 Vapour vacuum pumps; Measurement of performance characteristics; Part 1 : Measurement of volume rate of flow (pumping speed)
ISO 1070:1992/Amd 1:1997 Liquid flow measurement in open channels — Slope-area method — Amendment 1
ISO 1070:2018 Hydrometry — Slope-area method
ISO 1133-1:2011 Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 1: Standard method
ISO 1133:2005/Cor 1:2006 Plastics - Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics; Technical Corrigendum 1
ISO 19950:2015 Aluminium oxide primarily used for the production of aluminium - Determination of alpha alumina content - Method using X-ray diffraction net peak areas

Korean Agency for Technology and Standards (KATS), Flow rate + peak area

KS B ISO 748:2003 Measurement of liquid flow in open channels-Velocity-area methods
KS B ISO 748:2015 Measurement of liquid flow in open channels－Velocity-area methods
KS F 2010-2013 Method of measurements for flow discharge in open channels ? Velocity-area methods
KS F 2010-2013(2018) Method of measurements for flow discharge in open channels?Velocity-area methods
KS B ISO TR 9823-2003(2013) Liquid flow measurement in open channels－Velocity－area method using a restricted number of verticals
KS B 5323-2009 Variable area flowmeters
KS B ISO TR 7178:2003 Liquid flow measurement in open channels-Velocity-area methods-Investigation of total error
KS B ISO TR 7178:2015 Liquid flow measurement in open channels－Velocity－area methods－Investigation of total error
KS B 5323-1995 Variable area flowmeters
KS B 5323-2009(2019) Variable area flowmeters
KS B ISO TR 7178-2003(2013) Liquid flow measurement in open channels－Velocity－area methods－Investigation of total error
KS B ISO TR 9823:2003 Liquid flow measurement in open channels-Velocity-area method using a restricted number of verticals
KS B ISO TR 9823:2015 Liquid flow measurement in open channels－Velocity－area method using a restricted number of verticals
KS B ISO 1607-1:2004 Positive-displacement vacuum pumps-Measurement of performance characteristics-Part 1:Measurement of volume rate of flow(pumping speed)
KS B ISO 1607-1:2013 Positive-displacement vacuum pumps-Measurement of performance characteristics-Part 1:Measurement of volume rate of flow(pumping speed)
KS B ISO 1088:2021 Hydrometry — Velocity-area methods using current-meters —Collection and processing of data for determination of uncertainties in flow measurement
KS B ISO 1088:2015 Liquid flow measurement in open channels－Velocity-area methods－Collection and processing of data for determination of errors in measurement
KS A 0611-1997 Method of measurement by variable area flowmeters
KS A 0611-1997(2022) Method of measurement by variable area flowmeters
KS A 0611-1982 Method of measurement by variable area flowmeters
KS B 6314-2-2013 Positive-displacement oil-sealed rotary vacuum pumps－Measurement of volume rate of flow(pumping speed)
KS B ISO 1070:2003 Liquid flow measurement in open channels－Slope-area method
KS E ISO 7194-1:2018 Measurement of fluid flow in closed conduits — Velocity-area methods of flow measurement in swirling or asymmetric flow conditions in circular ducts by means of current meters or pitot static tubes
KS I ISO 10780-2008(2018) Stationary source emissions－Measurement of velocity and volume flowrate of gas streams in ducts
KS M ISO 11605:2008 Paper and board－Calibration of variable-area flowmeters
KS M ISO 11605:2003 Paper and board－Calibration of variable-area flowmeters
KS A 0611-1997(2017) Method of measurement by variable area flowmeters
KS E ISO 7194-1:2003 Measurement of fluid flow in closed conduits􀫥 Velocity-area methods of flow measurement in swirling or asymmetric flow conditions in circular ducts by means of current-meters or Pitot static tubes
KS H ISO 8460-2007(2021) Instant coffee－Determination of free-flow and compacted bulk densities
KS H ISO 8460-2007(2012) Instant coffee－Determination of free-flow and compacted bulk densities
KS B ISO 1607-1-2004(2009) Positive-displacement vacuum pumps－Measurement of performance characteristics－Part 1：Measurement of volume rate of flow(pumping speed)
KS M ISO 1133-1:2012 Plastics－Determination of the melt mass-flow rate(MFR) and melt volume-flow rate(MVR) of thermoplastics－Part 1：Standard method
KS B ISO 1088:2005 Liquid flow measurement in open channels-Velocity-area methods-Collection and processing of data for determination of errors in measurement
KS B ISO 1608-1:2004 Vapour vacuum pumps-Measurement of performance characteristics-Part 1:Measurement of volume rate of flow(pumping speed)
KS B ISO 1608-1:2013 Vapour vacuum pumps－Measurement of performance characteristics－Part 1：Measurement of volume rate of flow(pumping speed)
KS M ISO 1133-1-2012(2017) Plastics－Determination of the melt mass-flow rate(MFR) and melt volume-flow rate(MVR) of thermoplastics－Part 1：Standard method
KS B ISO 1608-1-2004(2009) Vapour vacuum pumps－Measurement of performance characteristics－Part 1：Measurement of volume rate of flow(pumping speed)

National Metrological Verification Regulations of the People's Republic of China, Flow rate + peak area

JJG 835-1993 Verification Regulation of Flowrate Facilities by Velocity-Area Method
JJG 138-2017 Acoustic Doppler Current Profiler

KR-KS, Flow rate + peak area

KS B ISO 748-2015 Measurement of liquid flow in open channels－Velocity-area methods
KS B ISO 1088-2021 Hydrometry — Velocity-area methods using current-meters —Collection and processing of data for determination of uncertainties in flow measurement
KS E ISO 7194-1-2018 Measurement of fluid flow in closed conduits — Velocity-area methods of flow measurement in swirling or asymmetric flow conditions in circular ducts by means of current meters or pitot static tubes
KS B ISO 1088-2015 Liquid flow measurement in open channels－Velocity-area methods－Collection and processing of data for determination of errors in measurement
KS M ISO 11605-2003 Paper and board－Calibration of variable-area flowmeters
KS E ISO 7194-1-2018(2023) Measurement of fluid flow in closed conduits — Velocity-area methods of flow measurement in swirling or asymmetric flow conditions in circular ducts by means of current meters or pitot static tubes

Standard Association of Australia （SAA）, Flow rate + peak area

AS 3778.3.2:1990 Measurement of water flow in open channels - Velocity-area methods - Measurement by moving-boat method
AS 3778.3.3:2022 Measurement of water flow in open channels, Part 3.3: Velocity-area methods — Measurement by slope-area method (ISO 1070:2018, IDT)
AS 3778.3.2:1990(R2009)
AS 3778.3.5:1990 Measurement of water flow in open channels - Velocity-area methods - Investigation of total error
AS 3778.3.7:2007 Measurement of water flow in open channels - Velocity-area methods - Measurement by ultrasonic (acoustic) method
AS 3778.3.8:2007 Measurement of water flow in open channels - Velocity-area methods - Electromagnetic method using a full-channel-width coil
AS 3778.3.6:2022 Measurement of water flow in open channels, Part 3.6: Velocity-area methods — Measurement of flow under tidal conditions (ISO 2425:2010, IDT)
AS 3778.3.7:2022 Measurement of water flow in open channels, Part 3.7: Velocity-area methods — Measurement by ultrasonic method (ISO 6416:2017, IDT)
AS 3778.3.4:1990 Measurement of water flow in open channels - Velocity-area methods - Collection and processing of data for determination of errors in measurement
AS 3778.3.8:2001 Measurement of water flow in open channels Part 3.8: Velocity-area method--Electromagnetic method using a full-channel-width coil
AS 3778.3.4:1990/Amdt 1:1991
AS 3778.3.4:2022 Measurement of water flow in open channels, Part 3.4: Velocity-area methods — Collection and processing of data for determination of uncertainties in measurement (ISO 1088:2007, IDT)

Canadian General Standards Board （CGSB), Flow rate + peak area

CGSB 157.2-M91-CAN/CGSB-1991 Mesure De Debit Des Liquides Dans Les Canaux Decouverts - Methodes D'Exploration Du Champ Des Vitesses
CGSB 157.6-M91-CAN/CGSB-1991 Mesure De Debit Des Liquides Dans Les Canaux Decouverts - Methodes D'Exploration Du Champ Des Vitesses - Recueil Et Traitement Des Donnees Pour La Determination Des Erreurs De Mesurage

Association of German Mechanical Engineers, Flow rate + peak area

VDI/VDE 2640 Blatt 2-1981 Measurement of water flow in closed conduits; velocity-area method
VDI/VDE 2640 Blatt 3-1983 Measurement of gas flow in circular; annular or rectangular sections of conduits velocity area method
VDI/VDE 3513 Blatt 1-2014 Variable-area flowmeters - Calculation methods
VDI/VDE 3513 Blatt 1-2009 Variable area flowmeters - Calculation methods
VDI/VDE 3513 Blatt 3-1989 Variable-area flowmeters; selection and installation recommendations
VDI/VDE 3513 Blatt 2-2008 Variable-area flowmeters - Maximum permissible errors, G, of the system

British Standards Institution (BSI), Flow rate + peak area

BS 1042-2.2:1983 Measurement of fluid flow in closed conduits. Velocity area methods. Method of measurement of velocity at one point of a conduit of circular cross section
BS ISO 3966:2020 Measurement of fluid flow in closed conduits. Velocity area method using Pitot static tubes
BS 1042 Sec.2.2:1983 Measurement of fluid flow in closed conduits. Velocity area methods. Method of measurement of velocity at one point of a conduit of circular cross section
BS ISO 3966:2008 Measurement of fluid flow in closed conduits - Velocity area method using Pitot static tubes
BS EN ISO 1133:1997 Plastics - Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics
BS EN ISO 1133:2005 Plastics - Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics
20/30358619 DC BS EN ISO 748. Hydrometry. Measurement of liquid flow in open channels. Velocity area methods using point velocity measurements
BS ISO 3354:2008 Measurement of clean water flow in closed conduits - Velocity-area method using current-meters in full conduits and under regular flow conditions
BS EN ISO 1133-1:2011 Plastics. Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics. Standard method
BS ISO 7194:2008 Measurement of fluid flow in closed conduits - Velocity-area methods of flow measurement in swirling or asymmetric flow conditions in circular ducts by means of current-meters or Pitot statics tubes
BS 3680-5:1992 Measurement of liquid flow in open channels - Slope area method of estimation
BS ISO 7181:1997 Hydraulic fluid power. Cylinders. Bore and rod area ratios
BS ISO 1088:2007 Hydrometry. Velocity-area methods using current-meters. Collection and processing of data for determination of uncertainties in flow measurement
BS EN ISO 1133-1:2022 Plastics. Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics. Standard method
BS 6986-2:1988 Analysis of instant tea. Methods for determination of free-flow and compacted bulk densities
BS 1042 Sec.2.1:1983 Measurement of fluid flow in closed conduits. Velocity area methods. Method using Pitot static tubes
DD ISO/TS 24154:2005 Hydrometry. Measuring river velocity and discharge with acoustic Doppler profilers
BS 1042 Sec.2.4:1989 Measurement of fluid flow in closed conduits. Velocity-area methods. Method of measurement of clean water flow using current meters in full conduits and under regular flow conditions
BS ISO 19950:2015 Aluminium oxide primarily used for the production of aluminium. Determination of alpha alumina content. Method using X-ray diffraction net peak areas
BS 1042 Sec.2.3:1984 Measurement of fluid flow in closed conduits. Velocity area methods. Methods of flow measurement in swirling or asymmetric flow conditions in circular ducts by means of current-meters or Pitot static tubes
BS 3680 Pt.5:1992 Measurement of liquid flow in open channels. Slope area method of estimation
BS EN ISO 6272-1:2004 Paints and varnishes - Rapid-deformation (impact resistance) tests - Falling-weight test, large-area indenter

United States Navy, Flow rate + peak area

NAVY MIL-F-24259 A-1987 FLUID FLOWMETER, VOLUME VELOCITY TYPE

ESDU - Engineering Sciences Data Unit, Flow rate + peak area

TD MEMO 6511 A-1969 A method for estimating the pressure distribution between the crest and the trailing edge on the surface of an aerofoil section in a sonic stream.
ESDU 05024 A-2007 Flow through sudden contractions of duct area: pressure losses and flow characteristics
ESDU 05024-2005 Flow through sudden contractions of duct area: pressure losses and flow characteristics
ESDU 71018-1971 Approximate wave drag of rectangular planform fairings at zero incidence in supersonic flow.
ESDU 01012-2001 Subsonic pressure drag of boat-tails with negligible annular base area in the presence of a central propulsive jet.

American Society for Testing and Materials (ASTM), Flow rate + peak area

ASTM D3858-95(2003) Standard Test Method for Open-Channel Flow Measurement of Water by Velocity-Area Method
ASTM D3858-95(1999) Standard Test Method for Open-Channel Flow Measurement of Water by Velocity-Area Method
ASTM D3858-95(2008) Standard Test Method for Open-Channel Flow Measurement of Water by Velocity-Area Method
ASTM D3858-95(2014) Standard Test Method for Open-Channel Flow Measurement of Water by Velocity-Area Method
ASTM D7214-07 Standard Test Method for Determination of the Oxidation of Used Lubricants by FT-IR Using Peak Area Increase Calculation
ASTM D7214-07a(2012) Standard Test Method for Determination of the Oxidation of Used Lubricants by FT-IR Using Peak Area Increase Calculation
ASTM D7214-07a Standard Test Method for Determination of the Oxidation of Used Lubricants by FT-IR Using Peak Area Increase Calculation
ASTM D7214-06 Standard Test Method for Determination of the Oxidation of Used Lubricants by FT-IR Using Peak Area Increase Calculation
ASTM D7214-07a(2019) Standard Test Method for Determination of the Oxidation of Used Lubricants by FT-IR Using Peak Area Increase Calculation
ASTM D7214-20 Standard Test Method for Determination of the Oxidation of Used Lubricants by FT-IR Using Peak Area Increase Calculation
ASTM D7214-23 Standard Test Method for Determination of the Oxidation of Used Lubricants by FT-IR Using Peak Area Increase Calculation
ASTM D7214-22 Standard Test Method for Determination of the Oxidation of Used Lubricants by FT-IR Using Peak Area Increase Calculation
ASTM D5130-95(1999) Standard Test Method for Open-Channel Flow Measurement of Water Indirectly by Slope-Area Method
ASTM D5130-95(2008) Standard Test Method for Open-Channel Flow Measurement of Water Indirectly by Slope-Area Method
ASTM D5130-95(2014) Standard Test Method for Open-Channel Flow Measurement of Water Indirectly by Slope-Area Method

Association Francaise de Normalisation, Flow rate + peak area

NF X10-112*NF ISO 3966:2021 Measurement of fluid flow in closed conduits - Velocity area method using Pitot static tubes
NF X10-301*NF EN ISO 748:2021 Hydrometry - Measurement of liquid flow in open channels - Velocity area methods using point velocity measurements
NF X10-112:1977 Measurement of fluid flow in closed conduites.velocity area method using pitot static tubes.
NF X10-309:1986 Liquid flow measurement in open channels. Velocity area methods. Collecting and processing of data for determination of errors measurement.
NF X10-114:1993 Measurement of fluid flow in closed conduits. Velocity-area methods of flow measurement in swirling or asymmetric flow conditions in circular ducts by means of current-meters or pitot static tubes.
NF X10-331:1992 Liquid flow measurement in open channels. Slope-area method.
NF X10-511:1971 Vacuum technology-positive-displacement vacuum pumps-measurement ofthe volume rate of flow (pumping speed).
NF T51-038-1*NF EN ISO 1133-1:2012 Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 1 : standard method.
NF X10-515:1971 Vacuum technology. Vapour vacuum pumps. Measurement of the volume rate of flow (pumping speed).

CZ-CSN, Flow rate + peak area

CSN ISO 1088:1994 Liquid flow measurement in open channels. Velocity-area methods. Collection and processing of data for determination of errors in measurement

IN-BIS, Flow rate + peak area

IS 2915-1964
IS 13858-1993 Instant tea - determination of free-flow and compacted bulk densities
IS 6849 Pt.1-1993 Positive displacement vacuum pumps. Measurement of performance characteristics. Part 1: Measurement of volume rate of flow (Pumping speed) (First Revision)
IS 2912-1964

Defense Logistics Agency, Flow rate + peak area

DLA DSCC-DWG-V62/13608-2013 MICROCIRCUIT, LINEAR, SINGLE CHANNEL HIGH SPEED, LOW SIDE GATE DRIVER (WITH 4-A PEAK SOURCE AND 8-A PEAK SINK), MONOLITHIC SILICON

ES-UNE, Flow rate + peak area

UNE-EN ISO 748:2023 Hydrometry - Measurement of liquid flow in open channels - Velocity area methods using point velocity measurements (ISO 748:2021)
UNE-EN ISO 1133-1:2023 Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 1: Standard method (ISO 1133-1:2022)

German Institute for Standardization, Flow rate + peak area

DIN EN ISO 748:2022-12 Hydrometry - Measurement of liquid flow in open channels - Velocity area methods using point velocity measurements (ISO 748:2021); German version EN ISO 748:2021
DIN EN ISO 748:2022 Hydrometry - Measurement of liquid flow in open channels - Velocity area methods using point velocity measurements (ISO 748:2021)
DIN EN ISO 748:2020 Hydrometry - Measurement of liquid flow in open channels - Velocity area methods using point velocity measurements (ISO/DIS 748:2020); German and English version prEN ISO 748:2020
DIN EN ISO 1133-1:2022-10 Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 1: Standard method (ISO 1133-1:2022); German version EN ISO 1133-1:2022

Danish Standards Foundation, Flow rate + peak area

DS/ISO 1133:1985 Plastics. Determination of the flow rate of thermoplastics

ZA-SANS, Flow rate + peak area

SANS 1133:2008 Plastics - Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics
SANS 1133:1997 Plastics - Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics

Japanese Industrial Standards Committee (JISC), Flow rate + peak area

JIS K 7210:1999 Plastics -- Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics
JIS B 8316-1:1999 Positive-displacement vacuum pumps -- Measurement of performance characteristics -- Part 1: Measurement of volume rate of flow (pumping speed)
JIS K 7210-1:2014 Plastics.Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics.Part 1: Standard method
JIS B 8317-1:1999 Vapour vacuum pumps -- Measurement of performance characteristics -- Part 1: Measurement of volume rate of flow (pumping speed)

American Society of Mechanical Engineers (ASME), Flow rate + peak area

ASME MFC-18M-2001 Measurement of Fluid Flow Using Variable Area Meters

American National Standards Institute （ANSI), Flow rate + peak area

BS EN ISO 748:2021 Hydrometry. Measurement of liquid flow in open channels. Velocity area methods using point velocity measurements (British Standard)
ANSI/ASME MFC-18M-2001 Measurement of Fluid Flow in Pipes Using Variable Area Meters

SAE - SAE International, Flow rate + peak area

SAE ARP1067A-1969 TURBINE NOZZLE AREA MEASUREMENT/WATER FLOW METHOD
SAE ARP1195-1993 TURBINE NOZZLE AREA MEASUREMENT BY AIRFLOW METHOD

RO-ASRO, Flow rate + peak area

STAS 4223/2-1970 CEMENT Determination of specific surface by means of the flowmeter
STAS 8972/2-1981 Hydrometry LIQUID FLOOR MEASUREMENT IN OPEN CHANNELS Velocity-area methods

Society of Automotive Engineers (SAE), Flow rate + peak area

SAE ARP1067A-1975 Turbine Nozzle Area Measurement By Water Flow Method
SAE ARP1067-1969 TURBINE NOZZLE AREA MEASUREMENT BY WATER FLOW METHOD
SAE ARP1195-1971 Turbine Nozzle Area Measurement By Airflow Method

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Flow rate + peak area

GB/T 3682-2000 Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics
GB/T 24558-2009 Acoustic Doppler current profiler
GB/T 19956.1-2005 Positive-displacement vacuum pumps.Measurement of performance characteristics.Part 1:Measurement of volume rate of flow (pumping speed)
GB/T 19955.1-2005 Vapour vacuum pumps.Measurement of performance characteristics.Part 1:Measurement of volume rate of flow (pumping speed)
GB/T 18798.5-2013 Instant tea.Part 5:Methods for determination of free-flow and compacted bulk densities

European Committee for Standardization (CEN), Flow rate + peak area

FprEN ISO 748:2021 Hydrometry - Measurement of liquid flow in open channels - Velocity area methods using point velocity measurements (ISO/FDIS 748:2021)
EN ISO 1133-1:2022 Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 1: Standard method (ISO 1133-1:2022)
EN ISO 1133-1:2011 Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 1: Standard method (ISO 1133-1:2011)

Group Standards of the People's Republic of China, Flow rate + peak area

T/CSTM 00031-2020 Thermoplastic elastomer - Determination of the melt mass-flow rate and melt volume-flow rate
T/CPCIF 0148-2021 Plastics—Ultrahigh melt fluidity polypropylene materials— Determination of melt volume-flow rate（MVR）and melt mass-flow rate（MFR）

AENOR, Flow rate + peak area

UNE 77225:2000 Stationary source emissions. Measurement of velocity and volume flow rate of streams in ducts.

RU-GOST R, Flow rate + peak area

GOST 8.439-1981 State system for ensuring the uniformity of measurements. Water flow rate in closed conduits. Technique of measuring by velocity-area method
GOST R 53334-2009 Vacuum equipment. Vapour vacuum pumps. Measurement of performance characteristics. Part 1. Measurement of volume rate of flow (pumping speed)
GOST R 53335-2009 Vacuum equipment. Positive-displacement vacuum pumps. Measurement of performance characteristics. Part 1. Measurement of volume rate of flow (pumping speed)
GOST R 8.909-2016 State system for insuring the uniformity of measurements. Secondary standards of units of mass and volumetric flow rate, mass and volume fluid. General metrological and technical requirements

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Flow rate + peak area

ASHRAE 4425-2001 Flow Calculations for Fixed-Area Expansion Devices

SE-SIS, Flow rate + peak area

SIS SS-ISO 1607-1:1991 Positive-displacement vacuum pumps — Measurement of performance characteris- tics — Part 1: Measurement of volume r?te of flow (pumping speed)

未注明发布机构, Flow rate + peak area

DIN EN ISO 1133:2005 Plastics – Determination of melt mass flow rate (MFR) and melt volume flow rate (MVR) of thermoplastics

VN-TCVN, Flow rate + peak area

TCVN 5088-1990 Instant tea.Determination of free-flow and compacted bulk densities
TCVN 7034-2002 Instant coffee.Determination of free-flow and compacted bulk densities

PL-PKN, Flow rate + peak area

PN C89069-1993 Plastics. Determination of the melt massflow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics

ISA - International Society of Automation, Flow rate + peak area

ISA RP16.6-1961 Methods and Equipment for Calibration of Variable Area Meters (Rotameters)
ISA RP16.4-1960 Nomenclature and Terminology for Extension - Type Variable Area Meters (Rotameters)

U.S. Air Force, Flow rate + peak area

AIR FORCE MIL-I-26299 G ADMIN NOTICE 2-2005 INDICATOR, RATE OF FLOW, 0-5000 PPH INTEGRALLY LIGHTED
AIR FORCE MIL-I-26299 G NOTICE 1-1996 INDICATOR, RATE OF FLOW, 0-5000 PPH INTEGRALLY LIGHTED
AIR FORCE MIL-I-26299 G-1990 INDICATOR, RATE OF FLOW, 0-5000 PPH INTEGRALLY LIGHTED

Lithuanian Standards Office , Flow rate + peak area

LST ISO 10780:2003 Stationary source emissions. Measurement of velocity and volume flowrate of gas streams in ducts (idt ISO 10780:1994)

Professional Standard - Machinery, Flow rate + peak area

JB/T 8472.1-1996 Performance measurement of vapor flow vacuum pump Part 1: Determination of pumping rate (volume flow rate)

YU-JUS, Flow rate + peak area

JUS L.N1.046-1991 Ey?raulic fluid pofter. CylJoders. Bore and rod area ratios

Professional Standard - Ocean, Flow rate + peak area

HY/T 102-2007 Test method of acoustic Doppler current profiler
HY/T 219-2017 Acoustic doppler current profiler data saving format

Canadian Standards Association (CSA), Flow rate + peak area

CSA Z23747-08-CAN/CSA-2008 Mat閞iel d'anesth閟ie et de r閍nimation respiratoire ?D閎itm鑤res ?d閎it de pointe expiratoire pour l'関aluation de la fonction pulmonaire chez les 阾res humains respirant spontan閙ent premi鑢e 閐ition

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Flow rate + peak area

GB/T 3682.1-2018 Plastics—Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics—Part 1:Standard method

European Telecommunications Standards Institute (ETSI), Flow rate + peak area

ETSI GSM 06.12-1992 Comfort Noise Aspects for Full-Rate Speech Traffic Channels

Inner Mongolia Provincial Standard of the People's Republic of China, Flow rate + peak area

DB1507/T 89-2023 "Hulunbuir Lakes, Rivers and Reservoirs Water Body Area Remote Sensing Monitoring Specifications"

Professional Standard - Petrochemical Industry, Flow rate + peak area

SH/T 1836-2023 Plastics - Determination of the melt volume-flow rate (MVR) of ultra-high molecular weight polyethylene (PE-UHMW)

IT-UNI, Flow rate + peak area

UNI ISO 1608-1:2020 Vapour vacuum pumps -- Measurement of performance characteristics - Part 1: Measurement of volume rate of flow (pumping speed)

Professional Standard - Surveying and Mapping, Flow rate + peak area

CH/Z 3024-2022 Technical Specifications for Monitoring Changes in Lake Water Area and Watershed Vegetation Coverage

National Aeronautics and Space Administration (NASA), Flow rate + peak area

NASA NACA-TR-1234-1955 On the Kernel function of the integral equation relating the lift and downwash distributions of oscillating finite wings in subsonic flow

Professional Standard - Forestry, Flow rate + peak area

LY/T 2030-2012 Technical regulation of rapid measurement of leaf area index in natural deciduous forests based on leaf litter collection
LY/T2030-2012 Technical regulation of rapid measurement of leaf area index in natural deciduous forests based on leaf litter collection