ZH
RU
ES

Flow rate and peak area

Flow rate and peak area, Total:182 items.

In the international standard classification, Flow rate and peak area involves: Measurement of fluid flow, Pipeline components and pipelines, Plastics, Rubber, Air quality, Paper and board, Tea. Coffee. Cocoa, Fluid power systems, Paints and varnishes, Quality, Products of the textile industry, Manufacturing processes in the rubber and plastics industries.

TR-TSE, Flow rate and peak area

TS 2236-1976 LIQUID FLOLW MEASUREMENT ?N ?PEN CHANNELS VELOCITY - AREA METHODS
TS 3072-1978 Measurement Of Clean Water Flow In Closed Conduits - Velocity - Area Method Using Current - Meters
TS 1857-1975 LIQUID FLOW MEASUREMENT ?N ?PEN CHANNELS — VELOCITY - AREA METHODS — COLLECTION OF DATA FOR DETERMINATION OF ERRORS ?N MEASUREMENT
TS 3417-1979 MEASUREMENT OP FLUID PLOW IN CLOSED CONDUITS - VELOCITY AREA METHOD USING PITOT STATIC TUBES

International Organization for Standardization (ISO), Flow rate and peak area

ISO 748:1973 Title missing - Legacy paper document
ISO 748:1979 Liquid flow measurement in open channels; Velocity-area methods
ISO 3354:1975 Measurement of clean water flow in closed conduits — Velocity-area method using current-meters
ISO 1088:1985 Liquid flow measurement in open channels; Velocity-area methods; Collection and processing of data for determination of errors in measurement
ISO/TR 7178:1983 Liquid flow measurement in open channels; Velocity-area methods; Investigation of total error
ISO 3354:1988 Measurement of clean water flow in closed conduits; velocity-area method using current-meters in full conduits and under regular flow conditions
ISO 1133:1991 Plastics; determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics
ISO 3966:1977 Measurement of fluid flow in closed conduits; Velocity area method using Pitot static tubes
ISO/TR 9823:1990 Liquid flow measurement in open channels; velocity-area method using a restricted number of verticals
ISO 3966:2020 Measurement of fluid flow in closed conduits — Velocity area method using Pitot static tubes
ISO 748:2021 Hydrometry — Measurement of liquid flow in open channels — Velocity area methods using point velocity measurements
ISO 3354:2008 Measurement of clean water flow in closed conduits - Velocity-area method using current-meters in full conduits and under regular flow conditions
ISO 7194:1983 Measurement of fluid flow in closed conduits; Velocity-area methods of flow measurement in swirling or asymmetric flow conditions in circular ducts by means of current-meters or Pitot static tubes
ISO 1133:2005 Plastics - Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics
ISO 3966:2008 Measurement of fluid flow in closed conduits - Velocity area method using Pitot static tubes
ISO 1088:1973 Liquid flow measurement in open channels — Velocity-area methods — Collection of data for determination of errors in measurement
ISO 1133:1997 Plastics - Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics
ISO 1088:2007 Hydrometry - Velocity-area methods using current-meters - Collection and processing of data for determination of uncertainties in flow measurement
ISO 7194:2008 Measurement of fluid flow in closed conduits - Velocity-area methods of flow measurement in swirling or asymmetric flow conditions in circular ducts by means of current-meters or Pitot static tubes
ISO 1133-1:2011 Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 1: Standard method
ISO 1133:2005/Cor 1:2006 Plastics - Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics; Technical Corrigendum 1
ISO 3320:2013 Fluid power systems and components.Cylinder bores and piston rod diameters and area ratios.Metric series
ISO 6272-2:2011 Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 2: Falling-weight test, small-area indenter
ISO 6272-2:2002 Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 2: Falling-weight test, small-area indenter
ISO 6272-1:2002 Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 1: Falling-weight test, large-area indenter
ISO 6272-1:2011 Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 1: Falling-weight test, large-area indenter
ISO 555-3:1982 Liquid flow measurement in open channels — Dilution methods for measurement of steady flow — Part 3: Constant rate injection method and integration method using radioactive tracers

Korean Agency for Technology and Standards (KATS), Flow rate and peak area

KS B ISO 748:2003 Measurement of liquid flow in open channels-Velocity-area methods
KS B ISO 748:2015 Measurement of liquid flow in open channels－Velocity-area methods
KS F 2010-2013 Method of measurements for flow discharge in open channels ? Velocity-area methods
KS F 2010-2013(2018) Method of measurements for flow discharge in open channels?Velocity-area methods
KS B ISO TR 9823-2003(2013) Liquid flow measurement in open channels－Velocity－area method using a restricted number of verticals
KS B ISO TR 7178:2003 Liquid flow measurement in open channels-Velocity-area methods-Investigation of total error
KS B ISO TR 7178:2015 Liquid flow measurement in open channels－Velocity－area methods－Investigation of total error
KS B ISO TR 7178-2003(2013) Liquid flow measurement in open channels－Velocity－area methods－Investigation of total error
KS B ISO 1088:2021 Hydrometry — Velocity-area methods using current-meters —Collection and processing of data for determination of uncertainties in flow measurement
KS B ISO 1088:2015 Liquid flow measurement in open channels－Velocity-area methods－Collection and processing of data for determination of errors in measurement
KS B ISO TR 9823:2003 Liquid flow measurement in open channels-Velocity-area method using a restricted number of verticals
KS B ISO TR 9823:2015 Liquid flow measurement in open channels－Velocity－area method using a restricted number of verticals
KS I ISO 10780-2008(2018) Stationary source emissions－Measurement of velocity and volume flowrate of gas streams in ducts
KS M ISO 11605:2008 Paper and board－Calibration of variable-area flowmeters
KS M ISO 11605:2003 Paper and board－Calibration of variable-area flowmeters
KS H ISO 8460-2007(2021) Instant coffee－Determination of free-flow and compacted bulk densities
KS H ISO 8460-2007(2012) Instant coffee－Determination of free-flow and compacted bulk densities
KS E ISO 7194-1:2018 Measurement of fluid flow in closed conduits — Velocity-area methods of flow measurement in swirling or asymmetric flow conditions in circular ducts by means of current meters or pitot static tubes
KS M ISO 1133-1:2012 Plastics－Determination of the melt mass-flow rate(MFR) and melt volume-flow rate(MVR) of thermoplastics－Part 1：Standard method
KS B ISO 1088:2005 Liquid flow measurement in open channels-Velocity-area methods-Collection and processing of data for determination of errors in measurement
KS E ISO 7194-1:2003 Measurement of fluid flow in closed conduits􀫥 Velocity-area methods of flow measurement in swirling or asymmetric flow conditions in circular ducts by means of current-meters or Pitot static tubes
KS M ISO 1133-1-2012(2017) Plastics－Determination of the melt mass-flow rate(MFR) and melt volume-flow rate(MVR) of thermoplastics－Part 1：Standard method
KS M ISO 6272-2-2013(2018) Paints and varnishes — Rapid deformation(impact resistance)tests–Part 2: Falling-weight test, small-area indenter
KS M ISO 6272-1-2013(2018) Paints and varnishes — Rapid-deformation (impact resistance) tests –Part 1: Falling-weight test, large-area indenter
KS M ISO 6272-1:2010 Paints and varnishes-Rapid-deformation(impact resistance) tests-Part 1:Falling-weight test, large-area indenter
KS M ISO 6272-2:2008 Paints and varnishes-Rapid-deformation(impact resistance) tests-Part 2:Falling-weight test, small-area indenter
KS M ISO 6272-2:2013 Paints and varnishes — Rapid deformation(impact resistance)tests–Part 2: Falling-weight test, small-area indenter
KS M ISO 6272-1:2013 Paints and varnishes — Rapid-deformation (impact resistance) tests –Part 1: Falling-weight test, large-area indenter

National Metrological Verification Regulations of the People's Republic of China, Flow rate and peak area

JJG 835-1993 Verification Regulation of Flowrate Facilities by Velocity-Area Method

KR-KS, Flow rate and peak area

KS B ISO 748-2015 Measurement of liquid flow in open channels－Velocity-area methods
KS B ISO 1088-2021 Hydrometry — Velocity-area methods using current-meters —Collection and processing of data for determination of uncertainties in flow measurement
KS M ISO 11605-2003 Paper and board－Calibration of variable-area flowmeters
KS B ISO 1088-2015 Liquid flow measurement in open channels－Velocity-area methods－Collection and processing of data for determination of errors in measurement
KS E ISO 7194-1-2018 Measurement of fluid flow in closed conduits — Velocity-area methods of flow measurement in swirling or asymmetric flow conditions in circular ducts by means of current meters or pitot static tubes
KS E ISO 7194-1-2018(2023) Measurement of fluid flow in closed conduits — Velocity-area methods of flow measurement in swirling or asymmetric flow conditions in circular ducts by means of current meters or pitot static tubes
KS M ISO 6272-2-2013(2023) Paints and varnishes — Rapid deformation(impact resistance)tests–Part 2: Falling-weight test, small-area indenter
KS M ISO 6272-1-2013(2023) Paints and varnishes — Rapid-deformation (impact resistance) tests –Part 1: Falling-weight test, large-area indenter

Standard Association of Australia （SAA）, Flow rate and peak area

AS 3778.3.2:1990 Measurement of water flow in open channels - Velocity-area methods - Measurement by moving-boat method
AS 3778.3.3:2022 Measurement of water flow in open channels, Part 3.3: Velocity-area methods — Measurement by slope-area method (ISO 1070:2018, IDT)
AS 3778.3.2:1990(R2009)
AS 3778.3.5:1990 Measurement of water flow in open channels - Velocity-area methods - Investigation of total error
AS 3778.3.7:2007 Measurement of water flow in open channels - Velocity-area methods - Measurement by ultrasonic (acoustic) method
AS 3778.3.8:2007 Measurement of water flow in open channels - Velocity-area methods - Electromagnetic method using a full-channel-width coil
AS 3778.3.4:1990 Measurement of water flow in open channels - Velocity-area methods - Collection and processing of data for determination of errors in measurement
AS 3778.3.6:2022 Measurement of water flow in open channels, Part 3.6: Velocity-area methods — Measurement of flow under tidal conditions (ISO 2425:2010, IDT)
AS 3778.3.7:2022 Measurement of water flow in open channels, Part 3.7: Velocity-area methods — Measurement by ultrasonic method (ISO 6416:2017, IDT)
AS 3778.3.4:1990/Amdt 1:1991
AS 3778.3.8:2001 Measurement of water flow in open channels Part 3.8: Velocity-area method--Electromagnetic method using a full-channel-width coil
AS 3778.3.4:2022 Measurement of water flow in open channels, Part 3.4: Velocity-area methods — Collection and processing of data for determination of uncertainties in measurement (ISO 1088:2007, IDT)

Canadian General Standards Board （CGSB), Flow rate and peak area

CGSB 157.2-M91-CAN/CGSB-1991 Mesure De Debit Des Liquides Dans Les Canaux Decouverts - Methodes D'Exploration Du Champ Des Vitesses
CGSB 157.6-M91-CAN/CGSB-1991 Mesure De Debit Des Liquides Dans Les Canaux Decouverts - Methodes D'Exploration Du Champ Des Vitesses - Recueil Et Traitement Des Donnees Pour La Determination Des Erreurs De Mesurage

Association of German Mechanical Engineers, Flow rate and peak area

VDI/VDE 2640 Blatt 2-1981 Measurement of water flow in closed conduits; velocity-area method
VDI/VDE 2640 Blatt 3-1983 Measurement of gas flow in circular; annular or rectangular sections of conduits velocity area method
VDI/VDE 3513 Blatt 3-1989 Variable-area flowmeters; selection and installation recommendations

ESDU - Engineering Sciences Data Unit, Flow rate and peak area

TD MEMO 6511 A-1969 A method for estimating the pressure distribution between the crest and the trailing edge on the surface of an aerofoil section in a sonic stream.
ESDU 05024 A-2007 Flow through sudden contractions of duct area: pressure losses and flow characteristics
ESDU 05024-2005 Flow through sudden contractions of duct area: pressure losses and flow characteristics
ESDU 01012-2001 Subsonic pressure drag of boat-tails with negligible annular base area in the presence of a central propulsive jet.

British Standards Institution (BSI), Flow rate and peak area

BS 1042-2.2:1983 Measurement of fluid flow in closed conduits. Velocity area methods. Method of measurement of velocity at one point of a conduit of circular cross section
BS EN ISO 1133:1997 Plastics - Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics
BS ISO 3966:2020 Measurement of fluid flow in closed conduits. Velocity area method using Pitot static tubes
BS EN ISO 1133:2005 Plastics - Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics
BS 1042 Sec.2.2:1983 Measurement of fluid flow in closed conduits. Velocity area methods. Method of measurement of velocity at one point of a conduit of circular cross section
BS ISO 3966:2008 Measurement of fluid flow in closed conduits - Velocity area method using Pitot static tubes
BS EN ISO 1133-1:2011 Plastics. Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics. Standard method
BS ISO 3354:2008 Measurement of clean water flow in closed conduits - Velocity-area method using current-meters in full conduits and under regular flow conditions
BS ISO 7181:1997 Hydraulic fluid power. Cylinders. Bore and rod area ratios
20/30358619 DC BS EN ISO 748. Hydrometry. Measurement of liquid flow in open channels. Velocity area methods using point velocity measurements
BS ISO 1088:2007 Hydrometry. Velocity-area methods using current-meters. Collection and processing of data for determination of uncertainties in flow measurement
BS 6986-2:1988 Analysis of instant tea. Methods for determination of free-flow and compacted bulk densities
DD ISO/TS 24154:2005 Hydrometry. Measuring river velocity and discharge with acoustic Doppler profilers
BS ISO 7194:2008 Measurement of fluid flow in closed conduits - Velocity-area methods of flow measurement in swirling or asymmetric flow conditions in circular ducts by means of current-meters or Pitot statics tubes
BS EN ISO 1133-1:2022 Tracked Changes. Plastics. Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics. Standard method
BS EN ISO 6272-1:2004 Paints and varnishes - Rapid-deformation (impact resistance) tests - Falling-weight test, large-area indenter
BS 1042 Sec.2.1:1983 Measurement of fluid flow in closed conduits. Velocity area methods. Method using Pitot static tubes
BS 1042 Sec.2.4:1989 Measurement of fluid flow in closed conduits. Velocity-area methods. Method of measurement of clean water flow using current meters in full conduits and under regular flow conditions
BS 1042 Sec.2.3:1984 Measurement of fluid flow in closed conduits. Velocity area methods. Methods of flow measurement in swirling or asymmetric flow conditions in circular ducts by means of current-meters or Pitot static tubes
BS ISO 3320:2013 Fluid power systems and components. Cylinder bores and piston rod diameters and area ratios. Metric series
BS 5752-11:1987 Methods of test for coffee and coffee products. Instant coffee: determination of free-flow and compacted bulk densities
BS EN ISO 1133-2:2011 Plastics. Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics. Method for materials sensitive to time-temperature history and/or moisture

Danish Standards Foundation, Flow rate and peak area

DS/ISO 1133:1985 Plastics. Determination of the flow rate of thermoplastics
DS/EN ISO 6272-1:2011 Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 1: Falling-weight test, large-area indenter
DS/EN ISO 6272-2:2011 Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 2: Falling-weight test, small-area indenter

Defense Logistics Agency, Flow rate and peak area

DLA DSCC-DWG-V62/13608-2013 MICROCIRCUIT, LINEAR, SINGLE CHANNEL HIGH SPEED, LOW SIDE GATE DRIVER (WITH 4-A PEAK SOURCE AND 8-A PEAK SINK), MONOLITHIC SILICON

American Society for Testing and Materials (ASTM), Flow rate and peak area

ASTM D3858-95(2003) Standard Test Method for Open-Channel Flow Measurement of Water by Velocity-Area Method
ASTM D3858-95(1999) Standard Test Method for Open-Channel Flow Measurement of Water by Velocity-Area Method
ASTM D3858-95(2008) Standard Test Method for Open-Channel Flow Measurement of Water by Velocity-Area Method
ASTM D3858-95(2014) Standard Test Method for Open-Channel Flow Measurement of Water by Velocity-Area Method
ASTM D5141-11(2018) Standard Test Method for Determining Filtering Efficiency and Flow Rate of the Filtration Component of a Sediment Retention Device
ASTM D5141-23 Standard Test Method for Determining Filtering Efficiency and Flow Rate of the Filtration Component of a Sediment Retention Device
ASTM C1339-02(2008) Standard Test Method for Flowability and Bearing Area of Chemical-Resistant Polymer Machinery Grouts

Japanese Industrial Standards Committee (JISC), Flow rate and peak area

JIS K 7210:1999 Plastics -- Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics
JIS K 7210-1:2014 Plastics.Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics.Part 1: Standard method

Association Francaise de Normalisation, Flow rate and peak area

NF X10-112*NF ISO 3966:2021 Measurement of fluid flow in closed conduits - Velocity area method using Pitot static tubes
NF X10-301*NF EN ISO 748:2021 Hydrometry - Measurement of liquid flow in open channels - Velocity area methods using point velocity measurements
NF X10-309:1986 Liquid flow measurement in open channels. Velocity area methods. Collecting and processing of data for determination of errors measurement.
NF X10-112:1977 Measurement of fluid flow in closed conduites.velocity area method using pitot static tubes.
NF X10-114:1993 Measurement of fluid flow in closed conduits. Velocity-area methods of flow measurement in swirling or asymmetric flow conditions in circular ducts by means of current-meters or pitot static tubes.
NF T51-038-1*NF EN ISO 1133-1:2012 Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 1 : standard method.
NF ISO 16028:2001 Transmissions hydrauliques - Dimensions et exigences des raccords rapides de type à face plane
NF E48-019*NF ISO 3320:2014 Fluid power systems and components - Cylinder bores and piston rod diameters and area ratios - Metric series
NF T30-017-1*NF EN ISO 6272-1:2011 Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 1 : falling-weight test, large-area indenter
NF T30-017-2*NF EN ISO 6272-2:2011 Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 2 : falling-weight test, small area indenter

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Flow rate and peak area

GB/T 3682-2000 Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics
GB/T 18798.5-2013 Instant tea.Part 5:Methods for determination of free-flow and compacted bulk densities
GB/T 20624.1-2006 Paints and varnishes. Rapid-deformation(impact resistance) tests. Part 1: Falling-weight test, large-area indenter
GB/T 20624.2-2006 Paints and varnishes. Rapid-deformation(impact resistance) tests. Part 2: Falling-weight test, small-area indenter

ZA-SANS, Flow rate and peak area

SANS 1133:1997 Plastics - Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics

CZ-CSN, Flow rate and peak area

CSN ISO 1088:1994 Liquid flow measurement in open channels. Velocity-area methods. Collection and processing of data for determination of errors in measurement

Group Standards of the People's Republic of China, Flow rate and peak area

T/CSTM 00031-2020 Thermoplastic elastomer - Determination of the melt mass-flow rate and melt volume-flow rate
T/CPCIF 0148-2021 Plastics—Ultrahigh melt fluidity polypropylene materials— Determination of melt volume-flow rate（MVR）and melt mass-flow rate（MFR）

IN-BIS, Flow rate and peak area

IS 2915-1964
IS 13858-1993 Instant tea - determination of free-flow and compacted bulk densities

AENOR, Flow rate and peak area

UNE 77225:2000 Stationary source emissions. Measurement of velocity and volume flow rate of streams in ducts.

ES-UNE, Flow rate and peak area

UNE-EN ISO 748:2023 Hydrometry - Measurement of liquid flow in open channels - Velocity area methods using point velocity measurements (ISO 748:2021)
UNE-EN ISO 1133-1:2023 Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 1: Standard method (ISO 1133-1:2022)

German Institute for Standardization, Flow rate and peak area

DIN EN ISO 748:2022-12 Hydrometry - Measurement of liquid flow in open channels - Velocity area methods using point velocity measurements (ISO 748:2021); German version EN ISO 748:2021
DIN EN ISO 748:2022 Hydrometry - Measurement of liquid flow in open channels - Velocity area methods using point velocity measurements (ISO 748:2021)
DIN EN ISO 748:2020 Hydrometry - Measurement of liquid flow in open channels - Velocity area methods using point velocity measurements (ISO/DIS 748:2020); German and English version prEN ISO 748:2020
DIN EN ISO 1133-1:2022-10 Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 1: Standard method (ISO 1133-1:2022); German version EN ISO 1133-1:2022
DIN EN ISO 6272-2:2011-11 Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 2: Falling-weight test, small-area indenter (ISO 6272-2:2011); German version EN ISO 6272-2:2011
DIN EN ISO 6272-1:2011-11 Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 1: Falling-weight test, large-area indenter (ISO 6272-1:2011); German version EN ISO 6272-1:2011
DIN EN ISO 1133-2:2012-03 Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 2: Method for materials sensitive to time-temperature history and/or moisture (ISO 1133-2:2011); German version EN ISO 1133-2:2011

VN-TCVN, Flow rate and peak area

TCVN 5088-1990 Instant tea.Determination of free-flow and compacted bulk densities
TCVN 7034-2002 Instant coffee.Determination of free-flow and compacted bulk densities
TCVN 2100-1-2007 Paints and varnishes.Rapid-deformation(impact resistance)tests.Part1:Falling-weight test,large-area indenter
TCVN 2100-2-2007 Paints and varnishes.Rapid-deformation(impact resistance)tests.Part2:Falling-weight test,small-area indenter

未注明发布机构, Flow rate and peak area

DIN EN ISO 1133:2005 Plastics – Determination of melt mass flow rate (MFR) and melt volume flow rate (MVR) of thermoplastics

ISA - International Society of Automation, Flow rate and peak area

ISA RP16.6-1961 Methods and Equipment for Calibration of Variable Area Meters (Rotameters)
ISA RP16.4-1960 Nomenclature and Terminology for Extension - Type Variable Area Meters (Rotameters)

PL-PKN, Flow rate and peak area

PN C89069-1993 Plastics. Determination of the melt massflow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics

European Committee for Standardization (CEN), Flow rate and peak area

FprEN ISO 748:2021 Hydrometry - Measurement of liquid flow in open channels - Velocity area methods using point velocity measurements (ISO/FDIS 748:2021)
EN ISO 1133-1:2022 Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 1: Standard method (ISO 1133-1:2022)
EN ISO 1133-1:2011 Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 1: Standard method (ISO 1133-1:2011)
EN ISO 6272-2:2011 Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 2: Falling-weight test, small-area indenter (ISO 6272-2:2011)
EN ISO 6272-1:2011 Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 1: Falling-weight test, large-area indenter

Lithuanian Standards Office , Flow rate and peak area

LST ISO 10780:2003 Stationary source emissions. Measurement of velocity and volume flowrate of gas streams in ducts (idt ISO 10780:1994)

RU-GOST R, Flow rate and peak area

GOST 8.439-1981 State system for ensuring the uniformity of measurements. Water flow rate in closed conduits. Technique of measuring by velocity-area method
GOST R 8.909-2016 State system for insuring the uniformity of measurements. Secondary standards of units of mass and volumetric flow rate, mass and volume fluid. General metrological and technical requirements
GOST 4.158-1985 System of product-quality indices. Volumetric, velocity counters, batchmeters and flowmeters. Electromagnetic flowmeters. Vortex flowmeters, batchmeters and metering plants. Nomenclature of indices

American National Standards Institute （ANSI), Flow rate and peak area

BS EN ISO 748:2021 Tracked Changes. Hydrometry. Measurement of liquid flow in open channels. Velocity area methods using point velocity measurements (British Standard)

Canadian Standards Association (CSA), Flow rate and peak area

CSA Z23747-08-CAN/CSA-2008 Mat閞iel d'anesth閟ie et de r閍nimation respiratoire ?D閎itm鑤res ?d閎it de pointe expiratoire pour l'関aluation de la fonction pulmonaire chez les 阾res humains respirant spontan閙ent premi鑢e 閐ition

European Telecommunications Standards Institute (ETSI), Flow rate and peak area

ETSI GSM 06.12-1992 Comfort Noise Aspects for Full-Rate Speech Traffic Channels

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Flow rate and peak area

GB/T 3682.1-2018 Plastics—Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics—Part 1:Standard method

National Aeronautics and Space Administration (NASA), Flow rate and peak area

NASA NACA-TR-1234-1955 On the Kernel function of the integral equation relating the lift and downwash distributions of oscillating finite wings in subsonic flow
NASA NACA-RM-L53H31 REV A-1953 Development of a supersonic area rule and an application to the design of a wing-body combination having high lift-to-drag ratios

YU-JUS, Flow rate and peak area

JUS U.A9.201-1988 Spatial needs of disabled people in buildings and environment. Flat-surface irculation areas. Access and passing spaces
JUS U.A9.203-1988 Spatial needs of disabled people ±n bu?ldings and environment. Flat-surface irculation areas. Slope and beight of curbstone
JUS U.A9.202-1988 Spatial needs of disable? people in buildings and environment. Fiat surface circu- ation areas. Pedestrian crossings and zones

CEN - European Committee for Standardization, Flow rate and peak area

EN ISO 6272-1:2004 Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 1: Falling-weight test@ large-area indenter
EN ISO 6272-2:2006 Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 2: Falling-weight test@ small-area indenter