ZH
RU
ES

limit psi

limit psi, Total:499 items.

In the international standard classification, limit psi involves: Earthworks. Excavations. Foundation construction. Underground works, Linear and angular measurements, Soil quality. Pedology, Civil engineering in general, Water quality, Analytical chemistry, Explosion protection, Electrical engineering in general, Screw threads, Installations in buildings, Furniture, Radiation measurements, Semiconductor devices, Acoustics and acoustic measurements, Rotating machinery, Wood, sawlogs and sawn timber, Services, Technical drawings, Electromagnetic compatibility (EMC), Vacuum technology, Shafts and couplings, Testing of metals, Iron and steel products, Non-textile floor coverings, Bearings, Optics and optical measurements, Mining and quarrying, Kitchen equipment, Metrology and measurement in general, Flexible drives and transmissions, Aerospace fluid systems and components, Rubber, Components for electrical equipment, Machine tool systems, Elements of buildings, Wood-based panels, Fuels, Rubber and plastics products, Welding, brazing and soldering, Protective equipment, Laundry appliances, Manufacturing forming processes, Insulating materials, Electric road vehicles, Fasteners for aerospace construction, Electrical accessories, Machine tools, Measurement of volume, mass, density, viscosity, Measurement of force, weight and pressure, Construction materials, Pipeline components and pipelines, Bottles. Pots. Jars, Protection of and in buildings, Raw materials for rubber and plastics, Domestic electrical appliances in general, Fasteners, Quality, Electronic tubes, Optoelectronics. Laser equipment, Mathematics, Measurement of fluid flow, Medical equipment, Cutting tools, Road vehicle systems, Ceramics, Air quality, Products of the textile industry, Waxes, bituminous materials and other petroleum products, Textile machinery, Nuclear energy engineering, Paper and board, Products of non-ferrous metals, Organic chemicals, Sewing machines and other equipment for the clothing industry, Protection against fire.

SAE - SAE International, limit psi

SAE AS176B-1963 Limits@ Table of Limits@ and Lubrication Charts
SAE AS176D-2018 Limits@ Table of Limits and Lubrication Charts
SAE ARP5448/1-2004 Plain Bearing Radial Limit and Ultimate Load Tests
SAE ARP5448/1A-2016 Plain Bearing Radial Limit and Ultimate Load Tests
SAE ARP1200-1971 Involute Splines; Wear Limit@ Definition of
SAE AIR1758A-2018 Limits and Fits - International Metric Tolerance System

Society of Automotive Engineers (SAE), limit psi

SAE AS176A-1960 TABLE OF LIMITS, LIMITS AND LUBRICATION CHARTS
SAE ARP5448/1-2010 Plain Bearing Radial Limit and Ultimate Load Tests
SAE ARP1200-1994 INVOLUTE SPLINES; WEAR LIMIT, DEFINITION OF
SAE AIR810-1963 DEGRADATION LIMITS OF MIL-H-5606 HYDRAULIC FLUID
SAE AIR810A-1968 DEGRADATION LIMITS OF MIL-H-5606B HYDRAULIC FLUID
SAE AIR1388B-1992 Service Damage Limits for Aircraft Hydraulic Tubing
SAE AIR1758-2012 Limits and Fits - International Metric Tolerance System
SAE AS85731/2-2012 Fastener,Electronic Equipment,Positive Self-Locking,Force Limiting
SAE J397-2009 Deflection Limiting Volume Protective Structures Laboratory Evaluation

German Institute for Standardization, limit psi

DIN 18122-1:1997 Soil, investigation and testing - Consistency limits - Part 1: Determination of liquid limit and plastic limit
DIN EN 1622:2006 Water quality - Determination of the threshold odour number (TON) and threshold flavour number (TFN); English version of DIN EN 1622:2006-10
DIN 32645:2008 Chemical analysis - Decision limit, detection limit and determination limit under repeatability conditions - Terms, methods, evaluation
DIN 32645:1994 Chemical analysis; decision limit; detection limit and determination limit; estimation in case of repeatability; terms, methods, evaluation
DIN EN 1839:2017-04 Determination of the explosion limits and the limiting oxygen concentration (LOC) for flammable gases and vapours; German version EN 1839:2017 / Note: DIN EN 1839 (2012-12) and DIN EN 14756 (2007-02) remain valid alongside this standard until 2018-01-11.
DIN EN 1839:2017 Determination of the explosion limits and the limiting oxygen concentration (LOC) for flammable gases and vapours
DIN ISO 11929:2011 Determination of the characteristic limits (decision threshold, detection limit and limits of the confidence interval) for measurements of ionizing radiation - Fundamentals and application (ISO 11929:2010)
DIN EN 1839:2017-11 Determination of the explosion limits and the limiting oxygen concentration (LOC) for flammable gases and vapours; German version EN 1839:2017
DIN 25482-2:1992 Limit of detection and limit of decision for nuclear radiation measurements; counting spectrometric measurements, neglecting the influence of sample treatment
DIN 8766:1994 Limits for wastegas heat losses of baking ovens
DIN 7172:1991-04 Tolerances and limit deviations for sizes above 3150 mm up to 10000 mm; principles, standard tolerances and limit deviations
DIN 743-4:2012 Calculation of load capacity of shafts and axles - Part 4: Fatigue limit, endurance limit - Equivalently damaging continuous stress
DIN 7172:1991 Tolerances and limit deviations for sizes above 3150 mm up to 10000 mm; principles, standard tolerances and limit deviations
DIN 69639:1984 Machine tools; cams for operating limit switches; dimensions
DIN 42026-4:1982 Permanent magnet segments; limiting values of visible faults
DIN 2245-1:1989 GO and NOT GO plug gauges from 1 mm to 40 mm nominal diameter
DIN 42026-4:1982-09 Permanent magnet segments; limiting values of visible faults
DIN 25482-3:1993 Limit of detection and limit of decision for nuclear radiation measurements; measurement by use of linear analog ratemeters
DIN 7150-2:2007 Geometrical product specifications (GPS) - System of limits and fits - Part 2: Limit gauges and gauging for plain cylindrical workpieces
DIN 743-4:2012-12 Calculation of load capacity of shafts and axles - Part 4: Fatigue limit, endurance limit - Equivalently damaging continuous stress
DIN EN 60034-9:2008 Rotating electrical machines - Part 9: Noise limits (IEC 60034-9:2003, modified + A1:2007); German version EN 60034-9:2005 + A1:2007
DIN 40400:1981 Edison thread for D-type fuses; limit dimensions
DIN ISO 6284:1997-09 Construction drawings - Indication of limit deviations (ISO 6284:1996)
DIN 158-1:1997-06 Metric external taper screw threads and mating internal parallel screw threads - Part 1: Nominal sizes, limit deviations, limits of size and verification
DIN 25482-1:1989 Limit of detection and limit of decision for nuclear radiation measurements; counting measurements neglecting the influence of sample treatment
DIN ISO 6284:1997 Construction drawings - Indication of limit deviations (ISO 6284:1996)
DIN 6163-1:1975 Colours and colour limits for signal lights; general rules
DIN 40200:1981-10 Nominal value, limiting value, rated value, rating - concepts
DIN 158-1:1997 Metric external taper screw threads and mating internal parallel screw threads - Part 1: Nominal sizes, limit deviations, limits of size and verification
DIN EN ISO 12004-2:2009 Metallic materials - Sheet and strip - Determination of forming-limit curves - Part 2: Determination of forming-limit curves in the laboratory (ISO 12004-2:2008); English version of DIN EN ISO 12004-2:2009-02
DIN 25482-1 Bb.1:1992 Limit of detection and limit of decision for nuclear radiation measurements; counting measurements neglecting the influence of sample treatment; comments and examples
DIN 25482-6:1993 Limit of detection and limit of decision for nuclear radiation measurements; counting measurements with allowance for the influence of sample treatment and equipment used
DIN 40200:1981 Nominal value, limiting value, rated value, rating - concepts
DIN 2245-2:1989 GO and NOT GO plug gauges over 40 mm up to 65 mm nominal diameter
DIN EN 14756:2007 Determination of the limiting oxygen concentration (LOC) for flammable gases and vapours; English version of DIN EN 14756:2007-02
DIN ISO 13942:2020-11 Bonded abrasive products - Limit deviations and run-out tolerances (ISO 13942:2019)
DIN EN ISO 12004-1:2021-02 Metallic materials - Determination of forming-limit curves for sheet and strip - Part 1: Measurement and application of forming-limit diagrams in the press shop (ISO 12004-1:2020); German version EN ISO 12004-1:2020
DIN 13-51:2005 ISO general purpose metric screw threads - Part 51: External screw threads for transition fits (former: screw threads for interference fit); tolerances, limit deviations, limits of sizes
DIN 25482-5:1993 Limit of detection and limit of decision for nuclear radiation measurements; counting measurements by high resolution gamma spectrometry, neglecting the influence of sample treatment
DIN 13-51:2013 ISO general purpose metric screw threads - Part 51: External screw threads for transition fits (former: screw threads for interference fit) - tolerances, limit deviations, limits of sizes
DIN 13-51:2012 ISO general purpose metric screw threads - Part 51: External screw threads for transition fits (former: screw threads for interference fit); tolerances, limit deviations, limits of sizes
DIN EN ISO 12004-2:2021-07 Metallic materials - Determination of forming-limit curves for sheet and strip - Part 2: Determination of forming-limit curves in the laboratory (ISO 12004-2:2021); German version EN ISO 12004-2:2021

British Standards Institution (BSI), limit psi

BS 969:2008 Specification for limits and tolerances on plain limit gauges
BS 969:1982 Specification for limits and tolerances on plain limit gauges
BS EN 1622:2006 Water quality - Determination of the threshold odour number (TON) and threshold flavour number (TFN)
BS 1916-1:1953 Limits and fits for engineering. Limits and tolerances
BS 1916-1:2009 Limits and fits for engineering Part 1: Guide to limits and tolerances
BS EN 1839:2017 Determination of the explosion limits and the limiting oxygen concentration (LOC) for flammable gases and vapours
PD 6536-1992 Extra-low voltage (ELV). Limit values
PD 6536:1992 Extra-low voltage (ELV). Limit values
BS EN 60034-9:2005 Rotating electrical machines - Noise limits
BS EN 61000-3-3:1995 Electromagnetic compatibility (EMC) - Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current 16 A per phase and not subject to conditional connection
BS 1916-3:1963 Limits and fits for engineering. Recommendations for tolerances, limits and fits for large diameters
BS EN ISO 6284:1999 Construction drawings - Indication of limit deviations
BS EN 1839:2004 Determination of explosion limits of gases and vapours
22/30435210 DC BS ISO 6284. Construction drawings. Indication of limit deviations
BS EN ISO 12004-2:2008 Metallic materials - Sheet and strip - Determination of forminglimit curves - Part 2: Determination of forming-limit curves in the laboratory
BS EN ISO 12004-2:2021 Metallic materials. Determination of forming-limit curves for sheet and strip. Determination of forming-limit curves in the laboratory
BS ISO 155:1999 Belt drives - Pulleys - Limiting values for adjustment of centres
BS EN 1263-2:2002 Safety nets - Safety requirements for the positioning limits
BS A 358-2:2000 MJ threads. Limit dimensions for bolts and nuts
BS EN ISO 12004-1:2008 Metallic materials - Sheet and strip - Determination of forminglimit curves - Part 1: Measurement and application of forminglimit diagrams in the press shop
BS ISO 13942:2003 Bonded abrasive products - Limit deviations and run-out tolerances
BS ISO 10471:2018 Glass-reinforced thermosetting plastics (GRP) pipes. Determination of the long-term ultimate bending strain and the long-term ultimate relative ring deflection under wet conditions
BS EN 12384:1999 Copper and copper alloys - Determination of spring bending limit on strip
BS 6751:1986 Guide for protection of machine tools intended for use in extreme environmental conditions

CZ-CSN, limit psi

CSN 65 0320-1966 Limit gap
CSN 25 4101-1964 Limit thread gauges
CSN 25 4200-1961 Summary of limit thread gauges
CSN 25 4300-1961 Screw gauges. Survey of limit thread gauges. V-thread and edison screw
CSN 25 3240-1960 Limit gauges "Go" side
CSN 64 0768-1982 Determination of time - emperature limits
CSN 25 4106 Cast.1-1964 Inspection thread gauges. Limit deviations
CSN 65 6338-1974 Greases. Determination o? strenght limit
CSN 73 2611-1966 Limit deviations for dimensions of struetural steelwork
CSN 42 0345-1987 Metal testing. Testing of proportional limit of tensile strength
CSN 01 4480-1989 Size limit deviations of cut metal sheets
CSN 01 4470-1972 Limit Variations of Dimensions and Forms of Castings
CSN 01 4347-1964 Matching of threads Limit deviations of Whitworth bolts threads
CSN 64 0006-1974 Plastics. Tolerances and limit deviations on dimensions of products made of plastics
CSN 05 0235-1977 Limit deviations of weldments and their machining additions
CSN 25 3100-1982 Plain limit gauges for holes and schafts. Types
CSN 01 4332-1962 Matching of threads. Limit deviationa of matric threads of bolts Sn
CSN 25 3182-1953 Limit gauges. Metal-sheet one-sided snap gauges. Range 3 up to 500 mm
CSN 01 4346-1964 Matching of threads. Limit deviations of Whitworth nut threads
CSN 25 3102-1980 Plain limit gauges for dimensions up to 500 mm. Tolerances
CSN 01 4312-1962 Matching of threads. Limit deviationa of minor diameter of bolt thread
CSN 01 4325-1962 Matching of threads. Limit deviations of nut metric threads of fits SH
CSN 65 6805-1971 Katol PP. (Strong solution o? extréme pressure additive)
CSN 01 4328-1962 Matching of threads. Limit deviation of metric threads of bolts So 8
CSN 25 3101-1985 Plain limit gauges for holes and schafts. Technical regulations
CSN 01 4333-1962 Matching of threads. Limit devialions of metric threads of bolts Sp
CSN 01 4330-1962 Matching of threads. Limit deviationa of metric threeds of bolts S
CSN 25 4120-1954 Thread gauges. Limit screw ring gauges for go-side, diamater 1 up to 100 mm. Metric thread

Japanese Industrial Standards Committee (JISC), limit psi

JIS A 1205:1999 Test method for liquid limit and plastic limit of soils
JIS A 1205:2009 Test method for liquid limit and plastic limit of soils
JIS B 7420:1997 Plain limit gauges
JIS B 0251:1998 Limit gauges for metric screw threads
JIS B 0255:1998 Limit gauges for unified screw threads
JIS B 0251:2008 Limit gauges for metric screw threads
JIS B 0254:2011 Limit Gauges for Parallel Pipe Threads
JIS B 3102:2001 Gauge blanks for screw threads limit gauges
JIS B 0251:1975 Limit gauges for metric coarse screw threads
JIS B 0255:1975 Limit gauges for unified coarse screw thread
JIS B 0256:1975 Limit gauges for unified fine screw thread
JIS B 0252:1996 Limit gauges for metric fine screw threads
JIS A 1206:1970 Method of test for plastic limit of soils
JIS B 0255 AMD 1:2008 Limit gauges for unified screw threads (Amendment 1)
JIS B 3102:1975 Gauge blanks for screw thread limit gauges
JIS C 3802:1964 Permissible limits of visual defects for insulating porcelains
JIS B 0401-2 ERRATUM 1:2002 ISO system of limits and fits -- Part 2: Tables of standard tolerance grades and limit deviations for holes and shafts (Erratum 1)
JIS R 6244:2022 Bonded abrasive products -- Limit deviations and run-out tolerances
JIS R 6244:2005 Bonded abrasive products -- Limit deviations and run-out tolerances
JIS B 0209:1997 Limits of sizes and tolerances for metric coarse screw threads
JIS B 0211:1997 Limits of sizes and tolerances for metric fine screw threads

European Committee for Standardization (CEN), limit psi

EN 1622:2006 Water quality - Determination of the threshold odour number (TON) and threshold flavour number (TFN)
EN 1622:1997 Water Analysis - Determination of the Threshold Odour Number (TON) and Threshold Flavour Number (TFN)
EN 1839:2017 Determination of the explosion limits and the limiting oxygen concentration(LOC) for flammable gases and vapours
prEN 20286-2-1992 ISO system of limits and fits; part 2: tables of standard tolerance grades and limit deviations for holes and shafts (ISO 286-2:1988)
EN 20286-2:1993 ISO System of Limits and Fits - Part 2: Tables of Standard Tolerance Grades and Limit Deviations for Holes and Shafts ISO 286-2 : 1988
EN ISO 6284:1999 Construction Drawings - Indication of Limit Deviations ISO 6284:1996
EN ISO 12004-2:2021 Metallic materials - Determination of forming-limit curves for sheet and strip - Part 2: Determination of forming-limit curves in the laboratory (ISO 12004-2:2021)
EN ISO 12004-2:2008 Metallic materials - Sheet and strip - Determination of forming-limit curves - Part 2: Determination of forming-limit curves in the laboratory (ISO 12004-2:2008)
HD 383 S2-1986 Conductors of insulated cables; guide to the dimensional limits of circular conductors

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, limit psi

GB/T 1957-1981 Limit gauges for plain workpiece
GB/T 1800.4-1999 Limits and fits Tables of standard tolerance grades and limit deviations for holes and shafts
GB/T 15054.5-1994 Miniature screw threads.Limits of sizes
GB/T 15756-2008 General purpose metric screw threads.Limits of sizes
GB/T 15756-1995 Limits of size for general purpose screw threads
GB/T 12359-1990 Limits of sizes for metric trapezoidal screw threads
GB/T 12359-2008 Metric trapezoidal screw threads.Limits of sizes
GB/T 20667-2006 Unified screw threads-Limits of sizes
GB/T 2516-2003 General purpose metric screw threads--Limit deviations
GB/T 1957-2006 Tolerances and general features for plain limin gauges
GB/T 7948-1987 Test method for PV limit of plastics bearings
GB/T 6322-1986 Types and dimensions of plain limit gauges
GB 7948-1987 Plastic bearing limit PV test method
GB/T 1800.2-2009 Geometrical Product Specifications (GPS) Limits and fits--Part 2:Tables of standard tolerance grades and limit deviations for holes and shafts
GB/T 1800.1-1997 Limits and fits--Based--Part 1: Terminology
GB/T 15531-1995 Belt drives--Pulleys--Limiting values for adjustment of centres
GB/T 15055-1994 Permissible stamping varitions in dimensions without tolerance indication
GB/T 15055-2007 Permissible stamping variations in dimensions without tolerance indication
GB/T 15531-2008 Belt drives.Pulleys.Limiting values for adjustment of centres
GB/T 15531-2022 Belt drives—Pulleys—Limiting values for adjustment of centres
GB/T 24171.2-2009 Metallic materials.Sheet and strip.Determination of forming limit curves.Part 2:Determinations of forming limit curves in laboratory
GB/T 1801-1999 Limits and fits Selection of tolerance zones and fits
GB/T 15054.2-2018 Miniature screw threads.Part 2:Tolerances and limits of size
GB/T 22593-2008 Water treatment reagent.General rules for the determination of limiting viscosity number
GB/T 1803-2003 Limits and fits Tolerance zones for holes and shafts size up to 18mm
GB/T 10093-2009 Probabilistic limit states design(Normal-Normal mode)
GB/T 1250-1989 Rules for expression and judgement of limiting values
GB/T 29536-2013 Testing method for the forming limit diagram (FLD) of metal tube
GB/T 10093-1988 Probabilistic limit states design (Normal-Normal mode)
GB 14147-1993 Standard permissible limits of release of lead or cadmium from ceramic packaging vessel in contact with food
GB/T 12474-1990 Method of test for explosion limits of combustible gases in air
GB/T 5371-2004 Limits and fits-The calculation and selection of interference fits
GB/T 13018-1991 Polyethylene (PE) pipes--Tolerances on outside diameters and wall thicknesses
GB/T 13019-1991 Polypropylene (PP) pipes--Tolerances on outside diameters and wall thicknesses
GB/T 12474-2008 Method for Determination of Explosive Limits of Combustible Gases in Air
GB/T 24171.1-2009 Metallic materials.Sheet and strip.Determination of forming limit curves.Part 1:Measurement and application of forming limit diagrams in press shop
GB/T 10920-2008 Types and dimensions of screw thread gauge and plain limit gauge

全国标准信息公共服务平台, limit psi

GB/T 1957-1980 smooth limit gauge

CN-STDBOOK, limit psi

图书 3-8436 Lean Limit Improvement

NO-SN, limit psi

NS 1563-1972 ISO system for limits and fits - Inspection limits for indicating measuring instruments
NS 8003-1982 Geotechnical testing - Laboratory methods - Plastic limit
NS 1562-1972 ISO system of limits and fits - Tolerances for gauges
NS 8004-1982 Geotechnical testing - Laboratory methods - Shrinkage limit
NS 1561-1972 ISO system of limits and fits - Inspection of plain workpieces

Shanghai Provincial Standard of the People's Republic of China, limit psi

DB31/ 237-1999 Limits of noise emitted by an engine boosting bicycle

Association Francaise de Normalisation, limit psi

NF S66-250*NF EN 1839:2017 Determination of the explosion limits and the limiting oxygen concentration (LOC) for flammable gases and vapours
NF P94-051:1993 Soil : inverstigation and testing. Determination of Atterberg's limits. Liquid limit test using cassagrande apparatus. Plastic limit test on rolled thread.
NF M60-200:2010 Determination of the characteristic limits (decision threshold, detection limit and limits of the confidence interval) for measurements of ionizing radiation - Fundamentals and application.
NF P94-052-1:1995 Soil : investigation and testing. Atterberg limit determination. Part 1 : liquid limit. Cone penetrometer method.
NF P02-023*NF EN ISO 6284:1999 Construction drawings. Indication of limit deviations.
NF E02-100-2:1993 Iso system of limites and fits. Part 2 : tables of standard tolerance grades and limit deviations for holes and shafts.
NF S66-250:2012 Determination of explosion limits of gases and vapours.
NF E24-103:1989 Belt drives. Pulleys. Limiting values for adjustment of centres.
NF EN 1839:2017 Détermination des limites d'explosivité des gaz et vapeurs et détermination de la concentration limite en oxygène (CLO) des gaz et des vapeurs inflammables
NF C51-119/A1*NF EN 60034-9/A1:2007 Rotating electrical machines - Part 9 : noise limits.
NF E03-504:1970 ISO miniature screw threads.tolerances.tables for limits of sizes.
NF EN ISO 6284:1999 Dessins de génie civil - Indication des écarts limites.
NF E02-202:1994 Inspection of tolerances of plain workpieces. Limit gauges. Tolerances and permissible wear of manufacture limit gauges up to 500 mm.
NF E03-619:2007 ISO metric trapezoidal screw threads - Checking by limit gauges.
NF ISO 1502:2005 Filetages métriques ISO pour usages généraux - Calibres à limites et vérification
NF A03-670-2:2008 Metallic materials - Sheet and strip - Determination of forming-limit curves - Part 2 : determination of forming-limit curves in laboratory.
NF A04-309:1990 STEEL FORGINGS. MAGNETIC PARTICLE TESTING. INSPECTION METHOD. LIMITS OF ACCEPTANCE.
NF E75-215*NF ISO 13942:2019 Bonded abrasive products - Limit deviations and run-out tolerances
NF ISO 13942:2019 Produits abrasifs agglomérés - Écarts limites et tolérances de battement
NF EN IEC 63093-13:2019 Noyaux ferrites - Lignes directrices relatives aux dimensions et aux limites des irrégularités de surface - Partie 13 : noyaux PQ
NF E03-152:1981 Thread checking with limit gauges. Threaded gauges for screw.
NF A04-308:1988 STEEL FORGINGS. ULTRASONIC TESTING. INSPECTION METHODS. LIMITS OF ACCEPTANCE.

American Society for Testing and Materials (ASTM), limit psi

ASTM D4318-00 Standard Test Methods for Liquid Limit, Plastic Limit, and Plasticity Index of Soils
ASTM D4318-10e1 Standard Test Methods for Liquid Limit, Plastic Limit, and Plasticity Index of Soils
ASTM D4318-05 Standard Test Methods for Liquid Limit, Plastic Limit, and Plasticity Index of Soils
ASTM F970-06 Standard Test Method for Static Load Limit
ASTM F970-15 Standard Test Method for Static Load Limit
ASTM D4318-17 Standard Test Methods for Liquid Limit, Plastic Limit, and Plasticity Index of Soils
ASTM D4318-17e1 Standard Test Methods for Liquid Limit, Plastic Limit, and Plasticity Index of Soils
ASTM F970-07 Standard Test Method for Static Load Limit
ASTM F970-00 Standard Test Method for Static Load Limit
ASTM F970-17 Standard Test Method for Static Load Limit
ASTM F970-22 Standard Test Method for Measuring Recovery Properties of Floor Coverings after Static Loading
ASTM E241-00e1 Standard Guide for Limiting Water-Induced Damage to Buildings
ASTM E241-00 Standard Guide for Limiting Water-Induced Damage to Buildings
ASTM D2449-88(1995)e1 Standard Specification for Rubber Bales From Natural Sources8212;Limit on Coating
ASTM D2449-88(2001) Standard Specification for Rubber Bales From Natural Sources8212;Limit on Coating
ASTM D2449-88(2007) Standard Specification for Rubber Bales From Natural Sources8212;Limit on Coating
ASTM E241-04 Standard Guide for Limiting Water-Induced Damage to Buildings
ASTM E241-09 Standard Guide for Limiting Water-Induced Damage to Buildings
ASTM E2218-23 Standard Test Method for Determining Forming Limit Curves

Korean Agency for Technology and Standards (KATS), limit psi

KS B 6884-2001 Safety limit switch for elevators
KS F 2303-2000 Test method for liquid limit and plastic limit of soils
KS B 5228-2001(2017) Limit gauges for unified coarse screw thread
KS B 5228-2001(2022) Limit gauges for unified coarse screw thread
KS F 2305-2022 Test method for shrinkage limit of soils
KS B 5221-2008(2018) Limit gauges for metric coarse screw threads
KS B 5221-1981 Limit gauges for metric coarse screw threads
KS B 6314-1-2002 Positive-displacement oil-sealed rotary vacuum pumps－Measurement of ultimate pressure
KS B 0213-2022 Limits and tolerances for unified coarse screw threads
KS E 3712-1996(2001) METHODS FOR ULTIMATE ANALYSIS OF COAL AND COKE
KS B 5223-2001(2016) Screw thread limit gauges for parallel pipe threads
KS B 0220-1979(2022) Gauge Blanks for Screw Thread Limit Gauges
KS B 5223-1985 Screw thread limit gauges for parallel pipe threads
KS B 0220-1982 Gauge Blanks for Screw Thread Limit Gauges
KS B 0213-2016 Limits and Tolerances for Unified Coarse Screw Threads
KS B 0213-2017 Limits and Tolerances for Unified Coarse Screw Threads
KS B 0216-1974(2020) Limits and Tolerances for Unified Fine Screw Threads
KS B 5223-2001(2021) Screw thread limit gauges for parallel pipe threads
KS F 2303-2020 Standard test method for liquid limit and plastic limit of soils
KS A ISO 155-2005(2010) Belt drives－Pulleys－Limiting values for adjustment of centres
KS F 2305-2020 Standard test method for shrinkage limit of soils
KS B 0211-1987(2017) Limits of Sizes and Tolerances for Metric Coarse Screw Threads
KS C IEC 61000-3-2:2010 Electromagnetic compatibility(EMC)－Part 3-2：Limits－Limits for harmonic current emissions(equipment input current ≤ 16 A per phase)
KS B 0214-2017 Limits of sizes and tolerances for metric fine screw threads
KS B ISO 12004-2003(2018)
KS M ISO 10471:2004 Glass-reinforced thermosetting plastics(GRP) pipes－Determination of the long-term ultimate bending strain and long-term ultimate relative ring deflection under wet conditions
KS M ISO 10471:2019 Glass-reinforced thermosetting plastics(GRP) pipes — Determination of the long-term ultimate bending strain and the long-term ultimate relative ring deflection under wet conditions
KS R ISO 13487:2005 Braking of road vehicles-Considerations on the definition of mean fully developed deceleration

BE-NBN, limit psi

SE-SIS, limit psi

SIS SS 02 71 21-1990 Geotechnical tests — Plastic limit
SIS SS 02 71 22-1990 Geotechnical tests — Shrinkage limit
SIS SS 02 71 18-1989 Geotechnical tests— Consistency limits — Symbols and definitions
SIS SS 06 28 02-1979 Welding electrodes — Fume classes — Threshold limit values
SIS SS 06 28 02-1982 Welding electrodes - Fume classes - Threshold limit values
SIS SMS 2995-1972 Cylindrical and bevel gears. Fatigue limits for steel and cast iron

RO-ASRO, limit psi

STAS 2612-1987 PKOTECTION AGAINST ELECTRIC SHOCKS Permissible limits
STAS 1913/4-1986 Foundation ground DETERMINATION OF PLASTIC LIMITS
STAS 6565-1979 STRAIGHT-SIDED SPL1NES Limits and fits
STAS 10326-1981 BIPOLAR TRANSISTORS Limiting values and basic electrical parameters nomenclature
STAS 7338-1982 STRAIGHT-SIDED INVOLUTE SPLINES Limits and fits
STAS 5515-1979 SCREW THREAD FOR CYCLES Limits
SR CEI 34-9-1993 Rotating electrical machines. Part 9: Noise limits
STAS 337/1-1988 WOOD Delermination of ultimatc strcngh in static bending
STAS SR ISO 3607:1995 Polyethylene (PE) pipes - Tolerances on outside diameters and wall thicknesses
STAS 1916-1964
STAS SR ISO 3609:1996 Polypropylene (PP) pipes - Tolerances on outside diameters and wall thicknesses
STAS 10316-1975 DIESEL ENGINE FUELS Determination of the limit point of filtrability
STAS 3507-1980 Solid plain gauges for shaft MOULDED GAUGE CALIPERS D imensions
STAS SR 13376-1997 Glass containers. Internai pressure resistance - Permissible limits
STAS 7837-1989 FURNITURE AND OTHER WOODEN FINISHED PRODUCTS Limit deviations and fits
STAS 8310-1986 WOODEN FURNITURE AND OTH ER WOODEN FINISHED PRODUCTS Limiting testers
STAS 336/1-1988 WOOD Delerminntion of ultimate tensile strcss parallel to grains
STAS 336-1981 WOOD Determination of ultimate lenslle stress parallel to grain

ES-AENOR, limit psi

International Electrotechnical Commission (IEC), limit psi

IEC TR3 61201:1992 Extra-low voltage (ELV); limit values
IEC TR3 1201:1992 Extra-low voltage (ELV); limit values
IEC TR3 60827:1985 Supporting and explanatory guide to voltage fluctuations limits for household appliances
IEC 61000-3-2:2014 Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current <= 16 A per phase)
IEC 61000-3-2:2018 Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current <= 16 A per phase)
IEC 61000-3-2:1995 Electromagnetic compatibility (EMC) - Part 3: Limits - Section 2: Limits for harmonic current emissions (equipment input current 16 A per phase)
CISPR TR 16-4-4:2007+AMD1:2017 CSV Specification for radio disturbance and immunity measuring apparatus and methods - Part 4-4: Uncertainties, statistics and limit modelling - Statistics of complaints and a model for the calculation of
CISPR TR 16-4-4-2007+AMD1-2017 CSV Specification for radio disturbance and immunity measuring apparatus and methods - Part 4-4: Uncertainties, statistics and limit modelling - Statistics of complaints and a model for the calculation of

Professional Standard - Light Industry, limit psi

QB/T 4452-2013 Wooden furniture.Limit and fit
QB/T 2366-1998 Limit value of sound power of leather machinery noise
QB/T 1512-2011 Sewing machine parts.Size limit of not note tolerances

AENOR, limit psi

UNE 82001:1991 TERMINOLOGY OF LIMITS AND FITS.
UNE 103104:1993 TEST FOR PLASTIC LIMIT OF A SOIL.
UNE 18102:1979 TRANSMISSION PULLEYS - LIMITING VALUES FOR ADJUSTMENT OF CENTRES.
UNE-EN ISO 6284:2000 CONSTRUCTION DRAWINGS. INDICATION OF LIMIT DEVIATIONS (ISO 6284:1996)
UNE-EN ISO 12004-2:2010 Metallic materials - Sheet and strip - Determination of forming-limit curves - Part 2: Determination of forming-limit curves in the laboratory (ISO 12004-2:2008)
UNE-EN 12384:1999 COPPER AND COPPER ALLOYS. DETERMINATION OF SPRING BENDING LIMIT ON STRIP.

GM North America, limit psi

GM GMY160-1988 ISO System of Limits and Fits

IFI/FASTNR - Industrial Fastener Institute, limit psi

MET IS- ISO System of Limits and Fits

International Organization for Standardization (ISO), limit psi

ISO 5731:1978 Kitchen equipment; Limit of size
ISO 11929-4:2022 Determination of the characteristic limits (decision threshold, detection limit and limits of the coverage interval) for measurements of ionizing radiation — Fundamentals and application — Part 4: Gui
ISO 286-2:1988 ISO system of limits and fits; part 2: tables of standard tolerance grades and limit deviations for holes and shafts
ISO 3133:1975 Wood; Determination of ultimate strength in static bending
ISO 155:1998 Belt drives - Pulleys - Limiting values for adjustment of centres
ISO 286-2:1988/Cor 1:2006 ISO system of limits and fits - Part 2: Tables of standard tolerance grades and limit deviations for holes and shafts; Technical Corrigendum 1
ISO 155:1989 Belt drives; pulleys; limiting values for adjustment of centres
ISO 12004:1997 Metallic materials - Guidelines for the determination of forming-limit diagrams
ISO 582:1979 Rolling bearings; Metric series; Chamfer dimension limits
ISO 12004-2:2008 Metallic materials - Sheet and strip - Determination of forming-limit curves - Part 2: Determination of forming-limit curves in the laboratory
ISO 12004-2:2021 Metallic materials - Determination of forming-limit curves for sheet and strip - Part 2: Determination of forming-limit curves in the laboratory
ISO 13942:2000 Bonded abrasive products - Limit deviations and run-out tolerances
ISO 3345:1975 Wood; Determination of ultimate tensile stress parallel to grain
ISO 3346:1975 Wood; Determination of ultimate tensile stress perpendicular to grain
ISO 3347:1976 Wood; Determination of ultimate shearing stress parallel to grain
ISO/R 812:1968 Method of test for temperature limit of brittleness for vulcanized rubbers
ISO 155:2019 Belt drives — Pulleys — Limiting values for adjustment of centres
ISO 12004-1:2020 Metallic materials — Determination of forming-limit curves for sheet and strip — Part 1: Measurement and application of forming-limit diagrams in the press shop
ISO 10471:2003 Glass-reinforced thermosetting plastics (GRP) pipes - Determination of the long-term ultimate bending strain and the long-term ultimate relative ring deflection under wet conditions
ISO 10471:2018 Glass-reinforced thermosetting plastics (GRP) pipes - Determination of the long-term ultimate bending strain and the long-term ultimate relative ring deflection under wet conditions
ISO 3161:1999 Aerospace - UNJ threads - General requirements and limit dimensions
ISO 2221:1972 Formaldehyde solutions for industrial use; Limit test for inorganic chlorides
ISO 2222:1972 Formaldehyde solutions for industrial use; Limit test for inorganic sulphates
ISO 1123:1976 Tapered roller bearings; Inch series; Chamfer dimension limits

Standard Association of Australia （SAA）, limit psi

AS 1654.2:1995 ISO system of limits and fits - Tables of standard tolerance grades and limit deviations for holes and shafts
AS 1997:1977 Plain limit gauges (metric series)
AS 2706:2003 Numerical values - Rounding and interpretation of limiting values
AS 4420.6:1996 Windows - Methods of test - Ultimate strength test
AS 1359.109:1998 Rotating electrical machines - General requirements - Noise limits
AS/NZS 61000.3.5:1998 Electromagnetic compatibility (EMC) - Limits - Limitation of voltage fluctuations and flicker in low-voltage power supply systems for equipment with rated current greater than 16 A

VN-TCVN, limit psi

TCVN 2245-1999 ISO system of limits and fits.Tables of standard tolerance grades and limit deviations for holes and shafts

NL-NEN, limit psi

NEN-ISO 286-1:1989 ISO-passingstelsel. Deel 1: Grondslagen van toleranties, grensmaatafwijkingen en passingen

YU-JUS, limit psi

JUS U.B1.020-1980 Testing ofsoils. Determination ofAtterberg limits
JUS K.F1.006-1990 Bonded abrasive products. Limit deviations and run-out tolerances
JUS D.A1.053-1979 Test ofwood. Determination ofultimate shearing stress parallel
JUS A.A7.300-1991 Classification of environmental conditions. Classification of environmental parameters and their severities. Introduction
JUS A.A7.301-1991 Classification of environmental conditions. Classification of groups of environmental parameters and their severities. Storage
JUS A.A7.302-1991 Classification of environmental conditions. Classification of groups of environmental parameters and their severities. Transportation

Professional Standard - Electron, limit psi

SJ 2140-1982 Methods of measurement for limiting voltage of silicon current regulator diodes

Canadian Standards Association (CSA), limit psi

CSA S16-2014(R2019) Limit States Design of Steel Structures
CSA S16-01-CAN/CSA-2001(R2007) Limit States Design of Steel Structures
CSA S408-1981SP-1981 Guidelines for the Development of Limit States Design R(2001)
CSA S16-01-CAN/CSA UPD 3-2006 Limit States Design of Steel Structures Sixth Edition
CSA S408-2011 Guidelines for the development of limit states design standards (Second Edition)

PT-IPQ, limit psi

RU-GOST R, limit psi

GOST 16483.32-1977 Wood. Method for determination of ultimate hygroscopicity
GOST 30530-1997 Noise. Methods for calculation of limit admissible nose characteristics of stationary machines
GOST 14025-1984 Limit gauges in woodworking. Tole rances
GOST 21153.6-1975 Rocks. Method for the determination of bend strength limit
GOST 18604.15-1977 Bipolar microwave oscillator transistors. Techniques for measuring critical current
GOST 16372-1993 Rotating electric machines. Limiting values of noise levels
GOST 255-1990 Ebonite. Determination of cross-breaking strength
GOST 9624-1993 Laminated glued wood method for determination of shear strength
GOST 33625-2015 Charcoal. Standard test method for ultimate analysis
GOST 5939-1951 Plain limit gauges for holes less than 1 mm. Tolerances
GOST 2534-1977 Height and depth limit gauges. Tolerances
GOST 21153.5-1988 Rocks. Method for the determination of cut strength limit
GOST 21153.8-1988 Rocks. Method for determination of triaxial compressive strength
GOST 20918-1975 Rolling bearings methods of calculation of limited rotation frequency
GOST 9624-2009 Laminated glued wood. Method for determination of shear strength
GOST 2534-1967 Height and depth limit gauges. Tolerances
GOST 14004-1968 Lever balance of general use. Limits of weighing. Norms of accuracy
GOST 310.4-1981 Cements. Methods of tests of bending and compression strengths
GOST 21554.2-1981 Sawn timber and blanks. Method for determination of ultimate strength in static bending
GOST 21815.8-1986 Image intensifier and image converter tubes. Method of measuring the limiting resolution
GOST 30386-1995 Textiles. Maximum permissible concentrations of free formaldehyde
GOST 31516-2012 Medical maximum glass thermometrs. General specifications
GOST 16483.2-1970 Wood. Method for determination of conventional ultimate strength in local compression perpendicular to grain
GOST 16483.23-1973 Wood. Method for determination of ultimate strength in tension along the grain
GOST 21554.4-1978 Sawn timber and semi-manufactures. Method for determining the ultimate strength in comression parallel to grain

Group Standards of the People's Republic of China, limit psi

T/CASME 46-2022 High precision smooth limit gauge
T/SDJX 001-2021 Code for construction of extreme sports park
T/CSAE 49-2016 Forming limit diagram test method for automotive sheet
T/GDAQI 94-2022 Evaluation method for limit resolution of medical electronic endoscope

US-CFR-file, limit psi

CFR 12-251.3-2014 Banks and banking. Part251:Concentration limit (Regulation XX). Section251.3:Concentration limit.
CFR 12-251.4-2014 Banks and banking. Part251:Concentration limit (Regulation XX). Section251.4:Exceptions to the concentration limit.

Indonesia Standards, limit psi

SNI 3422-2008 Testing methods for shrinkage limit of soils
SNI IEC 60034-9:2009 Rotating electrical machines - Part 9: Noise limits
SNI ISO 3133:2010 Wood - Determination of ultimate strength in static bending

National Metrological Verification Regulations of the People's Republic of China, limit psi

JJG 343-1996 Verification Regulation of Smooth Limit Gauge
JJG 343-2012 Verification Regulation of Plain Limit Gauges

IN-BIS, limit psi

IS 919-1963

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., limit psi

ASHRAE 4205-1998 Stability Limit of Room Air Temperature of a VAV System
ASHRAE 3920-1995 Flammability Limits of Ammonia-Air Mixtures
ASHRAE 4051-1997 To Boil or Not to Boil - Study of Bubble Embryo Dormancy Limits

Danish Standards Foundation, limit psi

DS/EN ISO 6284:2000 Construction drawings - Indication of limit deviations
DS/EN 1839:2012 Determination of explosion limits of gases and vapours
DS/EN ISO 12004-2:2008 Metallic materials - Sheet and strip - Determination of forming-limit curves - Part 2: Determination of forming-limit curves in the laboratory
DS/ISO 12004-2:2021 Metallic materials – Determination of forming-limit curves for sheet and strip – Part 2: Determination of forming-limit curves in the laboratory
DS 2370-1:1996 Measuring equipment - Limit gauges - Part 1: Limit gauges and reference gauges for plain parts - Manufacturing tolerances and allowed deviations
DS/EN ISO 12004-1:2008 Metallic materials - Sheet and strip - Determination of forming-limit curves - Part 1: Measurement and application of forming-limit diagrams in the press shop
DS/ISO 12004-1:2020 Metallic materials – Determination of forming-limit curves for sheet and strip – Part 1: Measurement and application of forming-limit diagrams in the press shop
DS/EN ISO 12004-2:2021 Metallic materials – Determination of forming-limit curves for sheet and strip – Part 2: Determination of forming-limit curves in the laboratory (ISO 12004-2:2021)
DS/EN 12384:1999 Copper and copper alloys - Determination of spring bending limit on strip

Cooling Technology Institute, limit psi

CTI STD-163-2015 Standard for Vibration Limits in Water Cooling Towers

Professional Standard - Petrochemical Industry, limit psi

SH/T 0323-1992 Lubricating Grease Strength Limit Determination Method
SH/T 0294-1992 Method for Determination of Ultimate Pressure of Diffusion Pump Oil

Professional Standard - Aerospace, limit psi

QJ 1161-1987 Specifications for smooth limit gauges
QJ 771-1983 Limit deviation of dimensions without tolerance
QJ 1158-1987 Application dimensions of smooth limit gauges for shafts
QJ 444-1984 Application dimensions for smooth limit gauges for bores
QJ 1164-1987 Depth, height, length limit gauge specification

Professional Standard - Military and Civilian Products, limit psi

WJ 1350-1982 Wood Products Smooth Limit Gauge
WJ 1877-1989 Determination method of limit priming charge of priming charge
WJ 1702-1987 Tolerances and technical conditions of smooth limit gauges
WJ 1811-1988 Smooth limit gauges for checking working threads

未注明发布机构, limit psi

BS EN ISO 6284:1999(2000) Construction drawings — Indication of limit deviations
BS EN 20286-2:1993(2002) ISO system of limits and fits — Part 2 : Tables of standard tolerance grades and limit deviations for holes and shafts
SAE ARP1200A-2000 INVOLUTE SPLINES; WEAR LIMIT, DEFINITION OF
DIN EN 1839:2004 Determination of the explosion limits of gases and vapors
DIN EN ISO 12004-2:2021 Metallic materials – Determination of the forming limit curve for sheets and strips – Part 2: Determination of forming limit curves in the laboratory

KR-KS, limit psi

KS B 5221-2008(2023) Limit gauges for metric coarse screw threads
KS B ISO 12004-2003(2023)
KS M ISO 10471-2019 Glass-reinforced thermosetting plastics(GRP) pipes — Determination of the long-term ultimate bending strain and the long-term ultimate relative ring deflection under wet conditions

ZA-SANS, limit psi

SANS 286-2:1988 ISO system of limits and fits Part 2: Tables of standard tolerance grades and limit deviations for holes and shafts
SANS 12004:1997 Metallic materials - Guidelines for the determination of forming-limit diagrams
SANS 6253:2006 Concrete tests - Tensile splitting strength of concrete

TR-TSE, limit psi

TS 953-1972 MECHANICAL PROPERTY LIMITS FOR ALUMINIUM ALLOY FOROINGS
TS 2474-1976 Wood-Determination of altimate strength in static bending
TS 657-1968 LIMITING VALUES FOR THE ADJUSTMENT OF CENTERS FOR TRANSMISSION PULLEYS
TS 952-1972 MECHANICAL PROPERTY LIMITS FOR RIVET STOCK OF ALUMINIUM AND ALUMINIUM ALLOYS
TS 2595-1977 WOOD - DETERMINATION OF ULTIMATE STRESS ?N COMPRESSION PARALLEL TO GRAIN
TS 923-1972 MECHANICAL. PROPERTY LIMITS FOR ROLLED PRODUCTS OF ALUMIN?UM AND AL.UMINT?M AJJjOYS
TS 996-1972 MECHANICAL PROPERTY LIMITS FOR EXTRUDED PRODUCTS OF ALUMINIUM AND ALUMINIUM ALLOYS
TS 2476-1976 Wood - Dete?mination of Ultimate Tensile Stress Perpendicular to G?ain
TS 2475-1976 Wood-Determination of Ultimate Tensile Stress Parallel to Grain
TS 3459-1980 WOOD — DETERMINATION OF ULTIMATE SHEARING STRESS PARALLEL TO GRAIN

International Telecommunication Union (ITU), limit psi

ITU-T V.50 FRENCH-1988 Standard limits for transmission quality of data transmission
ITU-T V.50 SPANISH-1988 STANDARD LIMITS FOR TRANSMISSION QUALITY OF DATA TRANSMISSION
ITU-T V.53 FRENCH-1988 LIMITS FOR THE MAINTENANCE OF TELEPHONE-TYPE CIRCUITS USED FOR DATA TRANSMISSION
ITU-T V.53 SPANISH-1988 LIMITS FOR THE MAINTENANCE OF TELEPHONE-TYPE CIRCUITS USED FOR DATA TRANSMISSION

Professional Standard - Aviation, limit psi

HB 0-35-2011 Limits of incline angle for extrusion section
HB 0-35-1983 Extrusion profile inclination angle limit value
HB 0-35-1974 Extrusion profile inclination angle limit value

US-FCR, limit psi

FCR COE CPAR-SL-94-1 FINAL REPORT-1994 MASONRY RESEARCH FOR LIMIT-STATES DESIGN

BR-ABNT, limit psi

AT-ON, limit psi

ONORM B 4300-1-1994 Steel structures - Design and construction - Limit states
OENORM EN ISO 12004-2:2021 Metallic materials - Determination of forming-limit curves for sheet and strip - Part 2: Determination of forming-limit curves in the laboratory (ISO 12004-2:2021)

Institute of Electrical and Electronics Engineers (IEEE), limit psi

IEEE Std C63.12-1987 Recommended practice for electromagnetic compatibility limits
IEEE Std C63.12-1999 Recommended Practice for Electromagnetic Compatibility Limits
IEEE/ANSI C63.12-1999 American National Standard for Electromagnetic Compatibility Limits--Recommended Practice

CH-SNV, limit psi

ESDU - Engineering Sciences Data Unit, limit psi

AERO W.02.04.11 B-1974 Limit of surface waviness for laminar flow over wings.
ESDU 88008-1988 Fatigue limit of unnotched steels (related to tensile strength).

Lithuanian Standards Office , limit psi

LST EN 1839-2012 Determination of explosion limits of gases and vapours
LST EN ISO 6284:2001 Construction drawings - Indication of limit deviations (ISO 6284:1996)
LST EN ISO 12004-2:2009 Metallic materials - Sheet and strip - Determination of forming-limit curves - Part 2: Determination of forming-limit curves in the laboratory (ISO 12004-2:2008)
LST EN ISO 12004-2:2021 Metallic materials - Determination of forming-limit curves for sheet and strip - Part 2: Determination of forming-limit curves in the laboratory (ISO 12004-2:2021)
LST EN 12384-2000 Copper and copper alloys - Determination of spring bending limit on strip

GM Europe, limit psi

GME R-6-17-1990 Road Test to Determine the Knock Limits of an Engine

National Metrological Technical Specifications of the People's Republic of China, limit psi

JJF(机械) 1011-2018 Specification for calibration of smooth limit gauges for abrasive tools
JJF(机械)1011-2018 Specification for calibration of smooth limit gauges for abrasive tools
JJF(机械) 051-2009 Specification for calibration of smooth limit gauges for abrasive tools

Military Standard of the People's Republic of China-General Armament Department, limit psi

GJB 2096-1994 Storage quality limits of gasoline and military diesel
GJB 3461-1998 Storage limit index of synthetic brake fluid for military vehicles
GJB 148-1986 Data transmission quality maintenance limits and maintenance standards

国家市场监督管理总局、中国国家标准化管理委员会, limit psi

GB/T 39598-2021 A guide to the limited quantity in indoor loading for wood-based panel based on its ultimate formaldehyde emission
GB/T 15055-2021 Permissible stamping variations in dimensions without tolerance indication
GB/T 38301-2019 Determination of limiting oxygen concentration (LOC) of flammable gases and vapours

American National Standards Institute （ANSI), limit psi

ANSI B4.1-1967 Preferred limits and fits for cylindrical parts
ANSI/ANS 2.21-2012 Criteria for Assessing Atmospheric Effects on the Ultimate Heat Sink

Professional Standard - Coal, limit psi

MT/T 837-1999 Method of determining minimum oxygen content concentration for coal dust explosion

Taiwan Provincial Standard of the People's Republic of China, limit psi

CNS 2925-1968 Practices for Designating Significant Places in Specificd Limiting Values
CNS 14185-1998 Method of test for toughness and tenacity of bituminous materials

AASHTO - American Association of State Highway and Transportation Officials, limit psi

DIVISION I 4.10-1996 Limit States@ Load Factors@ and Resistance Factors

IT-UNI, limit psi

UNI EN ISO 12004-2:2021 Metallic materials - Determination of forming-limit curves for sheet and strip - Part 2: Determination of forming-limit curves in the laboratory
UNI EN ISO 12004-1:2020 Metallic materials - Determination of forming-limit curves for sheet and strip - Part 1: Measurement and application of forming-limit diagrams in the press shop

ES-UNE, limit psi

UNE-EN ISO 12004-2:2021 Metallic materials - Determination of forming-limit curves for sheet and strip - Part 2: Determination of forming-limit curves in the laboratory (ISO 12004-2:2021)
UNE-EN ISO 12004-1:2021 Metallic materials - Determination of forming-limit curves for sheet and strip - Part 1: Measurement and application of forming-limit diagrams in the press shop (ISO 12004-1:2020)

Professional Standard - Forestry, limit psi

LY/T 1414-1999 Laminated wood plastics.Compreg Determination of extreme moisture content
LY/T 1415-1999 Laminated wood plastics.Compreg Determination of extreme volume expansion

API - American Petroleum Institute, limit psi

API REPORT 81-40-1982 Chord Stress Effects on the Ultimate Strength of Tubular Joints

Aerospace Industries Association/ANSI Aerospace Standards, limit psi

AIA/NAS NAS 1790-1996 Bolt, 100 Degree Flush Head 160,000 PSI UTS Rev. 4

PL-PKN, limit psi

PN S04052-1990 Measurement of noise inside motor car Limit of sound leVel
PN-EN ISO 12004-2-2021-08 E Metallic materials -- Determination of forming-limit curves for sheet and strip -- Part 2: Determination of forming-limit curves in the laboratory (ISO 12004-2:2021)
PN C04145-1962 Petroleum producis. Measurement of limit shear stress of grease

Professional Standard - Agriculture, limit psi

GB 1250-1989 Expression method and judgment method of limit value
GB/T 14147-1993 Allowable Limits of Dissolution of Lead and Cadmium in Ceramic Packaging Containers

CN-Q/CR, limit psi

Q/CR 9300-2014 Interim Code for Limit State Design of Railway Bridge and Culvert

American Society of Mechanical Engineers (ASME), limit psi

ASME MFC-7M-1987 Measurement of Gas Flow by Means of Critical Flow Venturi Nozzles

American Bureau of Shipping , limit psi

ABS 126 NOTICE 1-2011 GUIDE FOR BUCKLING AND ULTIMATE STRENGTH ASSESSMENT FOR OFFSHORE STRUCTURES
ABS 126 CORR-2014 GUIDE FOR BUCKLING AND ULTIMATE STRENGTH ASSESSMENT FOR OFFSHORE STRUCTURES

WRC - Welding Research Council, limit psi

BULLETIN 464-2001 GUIDELINES FOR SIZING OF VESSELS BY LIMIT ANALYSIS

ABS - American Bureau of Shipping, limit psi

ABS 126 CORR-2017 GUIDE FOR BUCKLING AND ULTIMATE STRENGTH ASSESSMENT FOR OFFSHORE STRUCTURES
ABS 126 COMMENTARY-2005 GUIDE FOR BUCKLING AND ULTIMATE STRENGTH ASSESSMENT FOR OFFSHORE STRUCTURES
ABS 126 NOTICE 2-2012 GUIDE FOR BUCKLING AND ULTIMATE STRENGTH ASSESSMENT FOR OFFSHORE STRUCTURES
ABS 126 NOTICE 3-2018 GUIDE FOR BUCKLING AND ULTIMATE STRENGTH ASSESSMENT FOR OFFSHORE STRUCTURES
ABS 126-2004 GUIDE FOR BUCKLING AND ULTIMATE STRENGTH ASSESSMENT FOR OFFSHORE STRUCTURES

Professional Standard - Textile, limit psi

FZ/T 90009-1991 General tolerance Limit deviation of untolerated dimensions

American Welding Society (AWS), limit psi

WRC 464:2001 Guidelines For Sizing Of Vessels By Limit Analysis

Defense Logistics Agency, limit psi

DLA MS14188 NOTICE 2-1997 SCREW, CAP, SOCKET HEAD, SQUARE 160 KSI, UTS
DLA MS14188 VALID NOTICE 1-1991 SCREW, CAP, SOCKET HEAD, SQUARE 160 KSI, UTS
DLA MS14188-1978 SCREW, CAP, SOCKET HEAD, SQUARE 160 KSI, UTS

The American Road & Transportation Builders Association, limit psi

AASHTO DIVISION I 5.13-1996 Limit States, Load Factors and Resistance Factors Interim 1997