01.040.13 环保、保健和安全 (词汇) 标准查询与下载

HJ 1192-2021 水质 9种烷基酚类化合物和双酚A的测定 固相萃取/高效液相色谱法

本标准规定了测定水中烷基酚类化合物和双酚A的高效液相色谱法。 本标准适用于地表水、地下水、生活污水和工业废水中4-叔丁基苯酚、4-丁基苯酚、4-戊基苯酚、4-己基苯酚、4-庚基苯酚、4-辛基苯酚、4-支链壬基酚、4-叔辛基苯酚和4-壬基酚等9 种烷基酚类化合物和双酚A的测定。

Water Quality Determination of 9 Alkylphenol Compounds and Bisphenol A by Solid Phase Extraction/High Performance Liquid Chromatography

HJ 1193-2021 水质 铟的测定 石墨炉原子吸收分光光度法

本标准规定了测定水中铟的石墨炉原子吸收分光光度法。 本标准适用于地表水、地下水和工业废水中铟的测定。 当进样体积为20 μl 时，方法的检出限为2 μg/L，测定下限为8 μg/L。

Determination of Water Quality Indium Graphite Furnace Atomic Absorption Spectrophotometry

HJ 1189-2021 水质 28种有机磷农药的测定 气相色谱-质谱法

本标准规定了测定水中有机磷农药的气相色谱-质谱法。 本标准适用于地表水、地下水、海水、生活污水和工业废水中敌敌畏、速灭磷、内吸磷、灭线磷、治螟磷、甲拌磷、特丁硫磷、二嗪磷、地虫硫磷、异稻瘟净、乐果、氯唑磷、甲基毒死蜱、磷胺、甲基对硫磷、毒死蜱、杀螟硫磷、马拉硫磷、对硫磷、溴硫磷、甲基异柳磷、水胺硫磷、稻丰散、丙溴磷、苯线磷、三唑磷、蝇毒磷、敌百虫等28 种有机磷农药的测定。 当地表水、地下水和海水取样量为1 L，定容体积为1.0 ml 时，28 种有机磷农药的方法检出限为0.3 μg/L～0.6 μg/L，测定下限为1.2 μg/L～2.4 μg/L；当生活污水和工业废水取样量为100 ml，定容体积为1.0 ml 时，28 种有机磷农药的方法检出限为4 μg/L～7 μg/L，测定下限为16 μg/L～28 μg/L。 本标准测定目标化合物的方法检出限和测定下限详见附录A。

Determination of 28 Organophosphorus Pesticides in Water Quality by Gas Chromatography-Mass Spectrometry

HJ 1190-2021 水质 灭菌生物指示物（枯草芽孢杆菌黑色变种）的鉴定 生物学检测法

本标准规定了鉴定水中灭菌生物指示物（枯草芽孢杆菌黑色变种）的生物学方法。 本标准适用于微生物实验室灭菌效果的评价。

Biological assay for the identification of water quality sterilization biological indicators (Bacillus subtilis var. black)

HJ 1191-2021 水质 叠氮化物的测定 分光光度法

本标准规定了测定水中叠氮化物的分光光度法。 本标准适用于地表水、地下水、生活污水和工业废水中叠氮化物的测定。 当取样体积为150 ml，试样制备体积为100 ml，使用10 mm 光程比色皿时，方法检出限为0.08 mg/L（以叠氮根计），测定下限为0.32 mg/L（以叠氮根计）。

Spectrophotometric method for the determination of water quality azide

HJ 131-2021 规划环境影响评价技术导则 产业园区

本标准规定了产业园区规划环境影响评价的基本任务、重点内容、工作程序、主要方法和要求。 本标准适用于国务院及省、自治区、直辖市人民政府批准设立的各类产业园区规划环境影响评价，其他类型园区可参照执行。

Planning Environmental Impact Assessment Technical Guidelines for Industrial Parks

HJ 1188-2021 核医学辐射防护与安全要求

本标准规定了医疗机构利用放射性药物开展临床核医学诊疗、实验研究以及放射性药物制备活动中的辐射防护与安全要求。 本标准适用于医疗机构核医学工作场所的设计、建设及开展核医学相关活动的辐射防护与安全管理。

Nuclear Medicine Radiation Protection and Safety Requirements

ASTM D653-21a 土壤、岩石和所含流体的标准术语

Standard Terminology Relating to Soil, Rock, and Contained Fluids

FprEN 1540-2021 工作场所暴露 术语

Workplace exposure - Terminology

HJ 1187-2021 放射性物品运输核与辐射安全分析报告书格式和内容

本标准规定了放射性物品运输核与辐射安全分析报告书的标准格式和主要内容。 本标准适用于一类放射性物品运输的核与辐射安全分析报告书编制。

Format and content of nuclear and radiation safety analysis report for transport of radioactive materials

BS EN IEC 60695-4:2021 着火危险试验. 第4部分: 电工产品着火试验术语

Fire hazard testing. Terminology concerning fire tests for electrotechnical products

DS/EN IEC 60695-4:2021 火灾危险试验第4部分：电工产品火灾试验术语

Fire hazard testing – Part 4: Terminology concerning fire tests for electrotechnical products

HJ 1186-2021 废锂离子动力蓄电池处理污染控制技术规范（试行）

本标准规定了废锂离子动力蓄电池处理的总体要求、处理过程污染控制技术要求、污染物排放控制与环境监测要求和运行环境管理要求。 本标准适用于废锂离子动力蓄电池处理过程的污染控制，可作为废锂离子动力蓄电池处理有关建设项目环境影响评价、建设运行、竣工环境保护验收、排污许可管理等的技术参考依据。 储能类、消费类等其他类型的废锂离子电池，以及锂离子电池生产废料处理过程的污染控制，可参照本标准执行。 本标准不适用于锂离子动力蓄电池在保质期内的返厂故障检测、维修翻新过程。

Technical specification of pollution control for treatment of waste power lithium-ion battery（Trial）

HJ 1185-2021 区域性土壤环境背景含量统计技术导则（试行）

本标准规定了区域性土壤环境至景含匡统计工作程序以及数据获取、数据处理分析、统计与表征等技术要求。 本标准适用于区域性土壤环境青景会量的统计,地块矿度土壤环境背景含量统计的相关标准另行制定。

Technical Guidelines for Regional Soil Environmental Background Content Statistics (Trial)

T/CACM 1368-2021 中医药治疗流感临床实践指南

前言  引言  1范围 2 规范性引用文件 3 术语和定义 4 辨证施治路 5诊断 5.1流感诊断标准 5.2 西医鉴别诊断 5.3 重症及危重症病例判断标准 6治疗 6.1诊治思路 6.2 流感轻症 6.3 流感重症 6.4流感危重症 6.5、流感恢复期 6.6 中成药 7康复调摄 8其他 附录A(资料性)古代剂量常见换算方法 附录B(资料性)指南的制定方法 附录C(资料性) 本文件制定组成员 参考文献

Clinical practice guideline on traditional Chinese medicine in the treatment of influenza

GSO ISO 374-1:2021 危险化学品和微生物防护手套 第1部分：化学风险的术语和性能要求

ISO 374-1:2016 specifies the requirements for protective gloves intended to protect the user against dangerous chemicals and defines terms to be used. NOTE If other protection features have to be covered, e.g. mechanical risks, thermal risks, electrostatic dissipation etc., the appropriate specific performance standard is to be used in addition. Further information on protective gloves standards can be found in the EN 420.

Protective gloves against dangerous chemicals and micro-organisms — Part 1: Terminology and performance requirements for chemical risks

GSO ISO 26800:2021 人体工程学 一般方法、原则和概念

ISO 26800:2011 presents the general ergonomics approach and specifies basic ergonomics principles and concepts. These are applicable to the design and evaluation of tasks, jobs, products, tools, equipment, systems, organizations, services, facilities and environments, in order to make them compatible with the characteristics, the needs and values, and the abilities and limitations of people. The provisions and guidance given by ISO 26800:2011 are intended to improve the safety, performance, effectiveness, efficiency, reliability, availability and maintainability of the design outcome throughout its life cycle, while safeguarding and enhancing the health, well-being and satisfaction of those involved or affected. The intended users of ISO 26800:2011 are designers, ergonomists and project managers, as well as managers, workers, consumers (or their representatives) and procurers. It also serves as a reference standard for standards developers dealing with ergonomics aspects.

Ergonomics — General approach, principles and concepts

GSO ISO 13943:2021 消防安全 词汇

ISO 13943:2017 defines terminology relating to fire safety as used in ISO and IEC fire standards.

Fire safety — Vocabulary

GSO ASTM D5681:2021 废物和废物管理的标准术语

1.1 This terminology contains standard definitions of terms used in the general area of waste and waste management. It is intended to promote understanding by providing precise technical definitions of terms used in the standards developed by Committee D34 and its subcommittees. 1.2 Terms used only within an individual standard, and having a meaning unique to that standard, may be defined or explained in the terminology section of that individual standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Terminology for Waste and Waste Management

GSO ISO 374-5:2021 危险化学品和微生物防护手套 第5部分：微生物风险的术语和性能要求

ISO 374-5:2016 specifies the requirements and test methods for protective gloves intended to protect the user against micro-organisms. NOTE If other protection features is to be needed, e.g. chemical risks, mechanical risks, thermal risks, electrostatic dissipation etc., the appropriate specific performance standard is to be used in addition. Further information on protective gloves standards can be found in the EN 420.

Protective gloves against dangerous chemicals and micro-organisms — Part 5: Terminology and performance requirements for micro-organisms risks