01.040.43 道路车辆工程 (词汇) 标准查询与下载

ASTM F3200-17b 无人驾驶自动引导型工业车辆的标准术语

1.1 This terminology covers terms associated with unmanned (that is, driverless), ground (that is, land-based and in continuous contact with the ground), industrial vehicles. By providing a common and consistent lexicon, the purpose of this terminology is to facilitate communication between individuals who may be involved in the research, design, deployment, and use of unmanned ground vehicles, including but not limited to, for manufacturing, distribution, security, etc. The terminology covers terms used in performance test methods of automatic guided vehicles (AGVs), autonomous mobile robots, and all other driverless, ground vehicles. In addition, with increasingly intelligent vehicle systems with onboard equipment, robotics industry terms that are used in associated test methods and descriptions are also included. 1.2 For the terminology to be harmonious with the practices in the field, definitions have been drawn from the literature or other public sources when possible. When no definition is available, is similar but requires change for use within standards produced by Committee F45, or in dispute, a consensusbased approach will be used to resolve definitions and add them to the lexicon. The development of this terminology is taking place in close coordination with corresponding efforts in all Committee F45 subcommittees to ensure comprehensive and consistent coverage. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Terminology for Driverless Automatic Guided Industrial Vehicles

ASTM F3200-17a 无人驾驶自动引导型工业车辆的标准术语

Standard Terminology for Driverless Automatic Guided Industrial Vehicles

ASTM F3200-17 无人驾驶自动引导型工业车辆的标准术语

Standard Terminology for Driverless Automatic Guided Industrial Vehicles

T/ZZB 0174-2017 警用两轮摩托车

本标准规定了警用两轮摩托车的基本要求、技术要求、试验方法、检验规则、标志、使用说明书、包装、运输及贮存和质量承诺。 本标准适用于在道路上行驶的采用点燃式发动机的警用两轮摩托车（以下简称摩托车）。

Two wheel police motorcycle

ASTM F3200-16 无人驾驶自动引导型工业车辆的标准术语

Standard Terminology for Driverless Automatic Guided Industrial Vehicles

ISO/TR 13062:2015 电动摩托车和摩托车 - 术语和分类

Electric mopeds and motorcycles - Terminology and classification

GSO ISO 7876-4:2015 燃油喷射设备词汇 第4部分：高压管道和终端连接

This part of ISO 7876 establishes a vocabulary for high-pressure pipes and end-connections in fuel injection systems for diesel (compression-ignition) engines. These high-pressure pipes and end-connections are used in fuel injection systems worldwide and require precise terminology. NOTE When the word “fuel” is used in the terms listed it can be omitted providing there can be no misunderstanding.

Fuel injection equipment -- Vocabulary -- Part 4: High-pressure pipes and end-connections

GSO ISO 6725:2015 道路车辆 两轮小排量摩托车和摩托车尺寸 术语和定义

This International Standard defines terms relating to the dimensions of two-wheeled mopeds and motorcycles. It does not deal with methods of measurement, nor with the units used in reporting the results, nor with the accuracy required or with the order of magnitude of the dimensions defined.

Road vehicles -- Dimensions of two-wheeled mopeds and motorcycles -- Terms and definitions

DB42/T 1037-2015 填（吹） 砂路基施工技术规范

Technical specification for filling (blowing) sand subgrade

GSO ISO 11838:2014 摩托车和摩托车手的运动学 词汇

1.1 This International Standard specifies symbols, definitions and conventions related to motorcycle and motorcycle-rider motions and kinematics and to the modelling thereof. 1.2 It does not deal with methods of measurement, nor with the units used in reporting the results, nor with accuracy. 1.3 The provisions of this International Standard apply to two-wheeled motorcycles as defined in ISO 3833. 1.4 This International Standard does not cover road motorcycles which are controlled by a pedestrian or which are used for the carriage of goods to the exclusion of persons. 1.5 This International Standard specifies terms, definitions and symbols for the following systems, parts and aspects: steering system (clause 3) suspension system (clause 4) tyres and wheels (clause 5) basic principles of axis systems and kinematics (clause 6) directional dynamics (clause 7) motorcycle motion characteristics (clause 8) aerodynamic characteristics of the motorcycle-rider combination (clause 9) riding postures and behaviours (clause 10) tests (clause 11).

Motorcycle and motorcycle-rider kinematics -- Vocabulary

GSO ISO 6726:2014 轻便摩托车和两轮摩托车 重量和定义

Defines terms relating to the masses of mopeds and motorcycles, but does not deal with methods of measurement, nor with the units used in reporting the results, nor with the accuracy required or with the order of magnitude of the masses defined. Applies to mopeds and motorcycles as defined in ISO 3833. This second edition cancels and replaces the first edition (1980).

Mopeds and motorcycles with two wheels -- Masses – Vocabular

GSO ISO 14722:2014 自行车和骑手自行车运动学 词汇

This International Standard defines terms, symbols and conventions related to moped and moped-rider motions and kinematics and to the modelling thereof. It does not deal with methods of measurement, nor with the units used in reporting the results, nor with accuracy. The definitions in this International Standard apply to two-wheeled mopeds as defined in ISO 3833 This International Standard does not cover road mopeds which are controlled by a pedestrian or which are used for the carriage of goods to the exclusion of persons.

Moped and moped-rider kinematics -- Vocabulary

KS R ISO 14722-2014(2019) 轻便摩托车和轻便摩托车驾驶员运动学词汇

Mopeds and moped-rider kinematics — Vocabulary

GSO ISO 15031-2:2013 道路车辆 车辆与外部设备之间的通信以诊断相关排放 第2部分：术语、定义、缩写和同义词指南

This part of ISO 15031 provides guidance on the usage of terms, definitions, abbreviations and acronyms used in emissions-related diagnostics, with respect to the communication between road vehicles and external equipment used in that field. It also specifies a procedure for constructing new terms. As it gives recommended usage of diagnostic terms applicable to electrical/electronic systems, it also makes reference to related mechanical terms, definitions, abbreviations and acronyms. This part of ISO 15031 is applicable to all light-duty gasoline and diesel passenger vehicles and trucks, and to heavy-duty gasoline vehicles. Specific applications of this document include diagnostic, service and repair manuals, bulletins and updates, training manuals, repair databases, underhood emission labels and emission certification applications. The introduction of a term, abbreviation or acronym not covered by this part of ISO 15031 is not prohibited. This part of ISO 15031 is intended to help industry provide standard terms, definitions, abbreviations and acronyms with a view to establishing a common terminology for diagnostic tools and publications. This part of ISO 15031 references the SAE J1930-Digital Annex (DA), which includes all standard terms, definitions, abbreviations and acronyms.

Road vehicles -- Communication between vehicle and external equipment for emissions-related diagnostics -- Part 2: Guidance on terms, definitions, abbreviations and acronyms

GSO ISO/TR 8713:2013 电动道路车辆定义

This Technical Report establishes a vocabulary of terms and the related definitions used in ISO/TC 22/SC 21 standards. These terms are specific to the electric propulsion systems of electrically propelled road vehicles, i.e. battery-electric vehicles (BEV), hybrid-electric vehicles (HEV, PHEV), and (pure and hybrid-electric) fuel cell vehicles (FCV, FCHEV).

Electrically propelled road vehicles -- Vocabulary

KS R 0024-2013 汽车制动器类型、制动机构和制动操作相关术语表

Glossary of terms relating to brake types, braking mechanics and brake operation of automobiles

KS R 0108-2013 与汽车悬架有关的术语表

Glossary of terms relating to suspension of automobiles

GSO ISO 3911:2013 充气轮胎的车轮和轮辋词汇、识别和标记

Abstract ISO 3911:2004 presents a vocabulary of terms related to, and systems for the designation and marking of, wheels and rims intended for use with pneumatic tyres.

Wheels and rims for pneumatic tyres -- Vocabulary, designation and marking

GSO ISO 7876-5:2013 燃油喷射设备词汇 第5部分：带有统一泵阀的燃油喷射系统

This part of ISO 7876 establishes a vocabulary for common rail (CR) fuel injection systems for diesel (compression-ignition) engines and their components. The terms defined in this part of ISO 7876 are unique to common rail fuel injection systems; terms and definitions relating to other fuel injection systems are to be found in the other parts of ISO 7876. NOTE When the word “fuel” is used in the terms listed, it can be omitted providing there can be no misunderstanding.

Fuel injection equipment -- Vocabulary -- Part 5: Common rail fuel injection system

GSO ISO 6813:2013 道路车辆 碰撞分类 术语

This International Standard defines terms relating to the classification of road vehicle collisions, concentrating on configuration aspects. Additional terms and definitions on road vehicle accidents are given in ISO 12353-1.

Road vehicles -- Collision classification -- Terminology