03.120.30;17.020 标准查询与下载

GOST R ISO 11843-5-2012 统计方法. 检测能力. 第5部分. 线性和非线性校准情况下的方法学

Statistical methods. Capability of detection. Part 5. Methodology in the linear and non-linear calibration cases

JIS Z 8462-5:2011 检测能力.第5部分:线性和非线性校准容器中的方法体系

Capability of detection -- Part 5: Methodology in the linear and non-linear calibration cases

DIN ISO 11843-5:2010 检测性能.第5部分:线性和非线性校准情况的方法体系(ISO 11843-5-2008).德文和英文文本

Capability of detection - Part 5: Methodology in the linear and non-linear calibration cases (ISO 11843-5:2008); Text in German and English

SANS 22971:2010 测量方法和结果的准确性(真实性和精确性)．设计,执行和统计分析实验室间可重复性和再现性结果中使用5725-2-1994标准

Provides users with practical guidance to the use of ISO 5725-2:1994 (published in South Africa as an identical adoption under the designation SANS 5725-2) and presents simplified step-by-step procedures for the design, implementation, and statistical an

Accuracy (trueness and precision) of measurement methods and results - Practical guidance for the use of ISO 5725-2:1994 in designing, implementing and statistically analysing interlaboratory repeatability and reproducibility results

KS Q ISO 11843-4:2009 检测能力.第4部分:最小可检测值与给定值相比对的方法

이 표준에서는 선형 교정곡선에 대한 KS Q ISO 11843-2에서의 가정 및 잔차 표준

Capability of detection－Part 4：Methodology for comparing the minimum detectable value with a given value

SANS 5725-6:2009 测量方法及结果的精度(真实度及精确度).第6部分:在实践中使用精确度值

Given that the accuracy of a measurement method has been established, this document gives information on the application of that knowledge in practical situations in such a way as to facilitate commercial transactions and to monitor and improve the oper

Accuracy (trueness and precision) of measurement methods and results Part 6: Use in practice of accuracy values

SANS 11843-3:2009 检测能力．第3部分：在无校准数据可采用情况下测定相应变量关键值的方法

Gives a method for estimating the critical value of the response variable from the mean and standard deviation of repeated measurements of the reference state in situations in which the value of the net state variable is zero. Gives procedures for the de

Capability of detection Part 3: Methodology for determination of the critical value for the response variable when no calibration data are used

SANS 11843-2:2009 检测的能力．第2部分：线性校准方法

Specifies basic methods to design experiments for the estimation of the critical value of the net state variable, the critical value of the response variable and the minimum detectable value of the net state variable and to estimate these characteristics

Capability of detection Part 2: Methodology in the linear calibration case

SANS 11843-5:2009 检测能力．第5部分：线性和非线性校准事例的方法学

Deals with calibration functions that are either linear or non-linear. Specifies basic methods to construct a precision profile for the response variable, transform this into a precision profile for the net state variable and use the latter precision pro

Capability of detection Part 5: Methodology in the linear and non-linear calibration cases

SANS 11843-4:2009 检测能力．第4部分：用最小可检测值与指定值相比对的方法

Deals with the assessment of the capability of detection of a measurement method without the assumptions in ISO 11843-2 of a linear calibration curve and certain relationships between the residual standard deviation and the value of the net state variabl

Capability of detection Part 4: Methodology for comparing the minimum detectable value with a given value

SANS 5725-5:2009 测量方法及结果的精度(真实度及精确度).第5部分:一种标准测量方法的精度真实性确定替代方法

Provides descriptions of alternatives to the basic method for determining the repeatability and reproducibility standard deviations of a standard measurement method, namely the split-level design and a design for heterogeneous materials. Describes the us

Accuracy (trueness and precision) of measurement methods and results Part 5: Alternative methods for the determination of the precision of a standard measurement method

SANS 5725-3:2009 测量方法及结果的精度(真实度及精确度).第3部分:一种标准测量方法精度的中间措施

Addresses the implications of the definitions of intermediate precision measures and presents guidance on the interpretation and application of the estimates of intermediate precision measures in practical situations.

Accuracy (trueness and precision) of measurement methods and results Part 3: Intermediate measures of the precision of a standard measurement method

SANS 5725-4:2009 测量方法及结果的精度(真实度及精确度).第4部分:一种标准测量方法的真实性确定基本方法

Provides basic methods for estimating the bias of a measurement method and the laboratory bias when a measurement method is applied. Provides measurement methods which yield measurements on a continuous scale and give a single value as the test result, a

Accuracy (trueness and precision) of measurement methods and results Part 4: Basic methods for the determination of the trueness of a standard measurement method

SANS 5725-2:2009 测量方法及结果的精度(真实度及精确度).第2部分:一种标准测量方法的可重复性及可再现性确定的基本方法

Amplifies the general principles to be observed in designing experiments for the numerical estimation of the precision of measurement methods by means of a collaborative interlaboratory experiment. Provides description of the basic method for routine use

Accuracy (trueness and precision) of measurement methods and results Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method

BS ISO 11843-5:2008 检测能力.线性和非线性校准容器中的方法学

Capability of detection - Methodology in the linear and non-linear calibration cases

BS ISO 11843-5:2009 检测能力 线性和非线性校准容器中的方法学

Capability of detection. Methodology in the linear and non-linear calibration cases

DS/ISO 11843-5:2008 检测能力 第5部分：线性和非线性校准案例中的方法

This part of ISO 11843 specifies basic methods to:. estimate the critical value and minimum detectable value of the net state variable from experimental data for the cases where the calibration function is non-linear.The methods described in this part of ISO 11843 are useful for checking the detection of a certain substance in various types of measurement equipments to which ISO 11843-2 cannot be applied. Included are assays of persistent organic pollutants (POPs) in the environment such as dioxins, pesticides and hormone-like chemicals by competitive ELISA (enzyme-linked immunosorbent assay) and the tests of bacterial endotoxins which induce hyperthermia i

Capability of detection - Part 5: Methodology in the linear and non-linear calibration cases

ISO 11843-5:2008 检测能力.第5部分:线性和非线性校准容器中的方法学

This part of ISO 11843 is concerned with calibration functions that are either linear or non-linear. It specifies basic methods to -- construct a precision profile for the response variable, namely a description of the standard deviation (SD) or coefficient of variation (CV) of the response variable as a function of the net state variable, -- transform this precision profile into a precision profile for the net state variable in conjunction with the calibration function, and -- use the latter precision profile to estimate the critical value and minimum detectable value of the net state variable. The methods described in this part of ISO 11843 are useful for checking the detection of a certain substance by various types of measurement equipment to which ISO 11843-2 cannot be applied. Included are assays of persistent organic pollutants (POPs) in the environment, such as dioxins, pesticides and hormone-like chemicals, by competitive ELISA (enzyme-linked immunosorbent assay), and tests of bacterial endotoxins that induce hyperthermia in humans. The definition and applicability of the critical value and minimum detectable value of the net state variable are described in ISO 11843-1 and ISO 11843-2. This part of ISO 11843 extends the concepts in ISO 11843-2 to the cases of non-linear calibration. The critical value, Xc, and minimum detectable value, xd, are both given in the units of the net state variable. If xc and xd are defined based on the distribution for the response variable, the definition should include the calibration function to transform the response variable to the net state variable. This part of ISO 11843 defines xc and xd based on the distribution for the net state variable independently of the form of the calibration function. Consequently, the definition is available irrespective of the form of this function, whether it is linear or non-linear. The calibration function should be continuous, differentiable, and monotonically increasing or decreasing. A further method is described for the cases where the SD or CV is known only in the neighbourhood of the minimum detectable value. Examples are provided.

Capability of detection - Part 5: Methodology in the linear and non-linear calibration cases

DIN ISO 11843-2 Berichtigung 1:2008 检测能力.第2部分:线性校准容器中的方法学.技术勘误DIN ISO 11843-2-2006-06(ISO 11843-2-2000/技术勘误1-2007)

Capability of detection - Part 2: Methodology in the linear calibration case (ISO 11843-2:2000), Corrigenda to DIN ISO 11843-2:2006-06 (ISO 11843-2:2000/Cor. 1:2007; text in German, English)

DS/ISO 11843-2/Corr. 1:2007 检测能力 第2部分：线性校准案例中的方法

Capability of detection —Part 2:Methodology in the linear calibration caseTECHNICAL CORRIGENDUM 1

Capability of detection - Part 2: Methodology in the linear calibration case