13.030.20 液态废物、淤泥 标准查询与下载

YS/T 119.12-2010 氧化铝生产专用设备 热平衡测定与计算方法 第12部分：间接加热脱硅系统

警告：使用本标准的人员应有现场测定工作的实践经验。本标准并未指出所有的安全问题。使用者有责任采取适当的安全和健康措施，并保证符合国家有关法规规定的条件。 警告：现场测定时要求带安全帽、眼镜及乳胶手套等劳保用品。取样时需加小心。 YS/T 119的本部分规定了氧化铝生产(包括烧结法和联合法)粗液间接加热脱硅系统的热平衡测定与计算基准、测定条件、测定项目及测定计算方法。 本部分适用于氧化铝生产蒸汽间接加热脱硅系统的热平衡测定与计算。

Determination and calculation of heat balance of special equipments for alumina production.Part 12:Indirect heating desiliconizing system

YS/T 743-2010 电解铝净化系统中气氟的测定碱滤纸·氟离子选择性电极法

本标准规定了电解铝净化系统中气态氟化物浓度的测定方法。 本标准适用于电解铝净化系统中气态氟化物浓度的测定,测定范围: 0.1 mg/m-500 mg/m。 本标准也适用于其他污染源中气态氟化物浓度的测定。

Determination of gaseous flouride in purification system for electrolyzed aluminium by alkali-paper sampling and fluorine ion-selective electrode analysis

YS/T 740-2010 氧化铝工业废水苛性碱度测定方法

本标准规定了氧化铝工业废水中苛性碱度的测定方法。 本标准适用于氧化铝工业废水中苛性碱度的测定,测定范围:50 mg/L-1 000 mg/L。 本标准也适用于其他行业含铝的碱性废水中苛性碱度的测定。

Method for determination of caustic alkalinity in wastewater of alumina industry

BS EN 14701-4:2010 淤泥特征.过滤特性.第4部分:絮状淤泥的滤水性能测定

This European Standard specifies a method for the determination of drainability of flocculated sludges. It is applicable to sludge and sludge suspensions from: a) storm water handling; b) urban wastewater collecting systems; c) urban wastewater treatment plants; d) treating industrial wastewater similar to urban wastewater (as defined in Directive 91/271/EEC); e) water supply treatment plants. This method is also applicable to sludge suspensions from other origin.

Characterization of sludges. Filtration properties. Part 4: Determination of the drainability of flocculated sludges

DS/EN 14701-4:2010 污泥的特性 过滤性能 第4部分：絮凝污泥排水能力的测定

This European Standard specifies a method for the determination of drainability of flocculated sludges. It is applicable to sludge and sludge suspensions from: a) storm water handling;b) urban wastewater collecting systems;c) urban wastewater treatment plants;d) treating industrial wastewater similar to urban wastewater (as defined in Directive 91/271/EEC);e) water supply treatment plants.This method is also applicable to sludge suspensions from other origin.

Characterization of sludges - Filtration properties - Part 4: Determination of the drainability of flocculated sludges

DIN EN 14701-4:2010 污物特性.过滤特性.第4部分:絮状残渣滤水性能的测定.德文版本EN 14701-4-2010

This document specifies a method for the determination of drainability of flocculated sludges. It is applicable to sludge and sludge suspensions from storm water handling, urban wastewater collecting systems, urban wastewater treatment plants, treating industrial wastewater similar to urban wastewater (as defined in Directive 91/271/EEC) and water supply treatment plants. This method is also applicable to sludge suspensions from other origin. Anycase, it is applicable to all kinds of sludges provided particles are larger than 500 ?m in size. That is why the test should preferably be performed on sludges first flocculated.

Characterization of sludges - Filtration properties - Part 4: Determination of the drainability of flocculated sludges; German version EN 14701-4:2010

LST EN 14701-4-2010 污泥的特性 过滤性能 第4部分：絮凝污泥排水能力的测定

Characterization of sludges - Filtration properties - Part 4: Determination of the drainability of flocculated sludges

NF X33-026-4:2010 淤泥特性.过滤特性.第4部分:絮状淤泥的滤水性能测定

Characterisation of sludges - Filtration properties - Part 4 : determination of the drainability of flocculated sludges.

EN 14701-4:2010 污物特性.过滤特性.第4部分:絮状残渣滤水性能的测定

This European Standard specifies a method for the determination of drainability of flocculated sludges. It is applicable to sludge and sludge suspensions from: a) storm water handling; b) urban wastewater collecting systems; c) urban wastewater treatment plants; d) treating industrial wastewater similar to urban wastewater (as defined in Directive 91/271/EEC); e) water supply treatment plants.This method is also applicable to sludge suspensions from other origin.

Characterization of sludges - Filtration properties - Part 4: Determination of the drainability of flocculated sludges

SNI 7184.4-2010 危险和有毒废物的特性 (B3) 第4部分：使用挂钩法测试液体和半固体废物腐蚀速率的方法

Characterization of hazardous and toxic wastes (B3) Part 4: Method for testing corrosion rates of liquid and semi-solid wastes using the hook method

BS EN 15170:2008 泥浆特性.发热量的测定

This European Standard specifies a method for the determination of the gross calorific value of sludge at constant volume and at the reference temperature 25 °C in a bomb calorimeter calibrated by combustion of certified benzoic acid. The result obtained is the gross calorific value of the sample at constant volume with both the water of the combustion products and the moisture of the sludge as liquid water. In practice, sludges are burned at constant (atmospheric) pressure and the water is not condensed but is removed as vapour with the flue gases. Under these conditions, the operative heat of combustion to be used is the net calorific value of the fuel at constant pressure. In this European Standard the net calorific value at constant volume is described as it requires less additional determinations. This method is applicable to all kinds of sludges.

Characterization of sludges - Determination of calorific value

BS EN 15216:2007 废弃物的表征.水和洗出液中总溶解固体量(TDS)的测定

This European standard specifies a method for the determination of total dissolved solids (TDS) in water and eluates, provided they are not volatile under the conditions specified or that they do not release water molecules from hydration. It applies to water and eluates containing more than 200 mg/l of total dissolved solids. Samples with lower amounts of dissolved solids can be analyzed by repetition of the drying step.

Characterization of waste - Determination of total dissolved solids (TDS) in water and eluates

DS/CEN/TR 15809:2009 污泥的特性 卫生方面 处理

This CEN Technical Report gives information about principles to be followed in different sludge treatment processes to reach specified hygienic requirements.

Characterization of sludges - Hygienic aspects - Treatments

BS PD CEN/TR 15809:2008 污泥的特性.卫生方面.处理

This CEN Technical Report gives information about principles to be followed in different sludge treatment processes to reach specified hygienic requirements.

Characterization of sludges — Hygienic aspects — Treatments

DS/EN 15170:2009 污泥的表征-热值的测定

This European Standard specifies a method for the determination of the gross calorific value of sludge at constant volume and at the reference temperature 25 °C in a bomb calorimeter calibrated by combustion of certified benzoic acid.The result obtained is the gross calorific value of the sample at constant volume with both the water of the combustion products and the moisture of the sludge as liquid water. In practice, sludges are burned at constant (atmospheric) pressure and the water is not condensed but is removed as vapour with the flue gases. Under these conditions, the operative heat of combustion to be used is the net calorific value of the fuel at

Characterization of sludges - Determination of calorific value

NF X33-036*NF EN 15170:2009 污泥的特性.生热值的测定

Characterization of sludges - Determination of calorific value.

ASTM D6759-09 用抓斗采样器和离散深度采样器对液体取样的标准实施规程

Sampling at specified depth(s) within a liquid may be needed to confirm or rule out variations within a target population. This practice describes the design and operation of commercially available grab and discrete depth samplers for persons responsible for designing or implementing sampling programs, or both. These sampling devices are used for sampling liquids in tanks, ponds, impoundments, and other open bodies of water. Some may be used from the edge or bank of the sampling site, whereas some can only be used from a platform, boat, or bridge over the sampling site. Some of the devices described are suitable for sampling slurries and sludges as well as aqueous and other liquids with few or no suspended solids. Practice D 5743 provides guidance for sampling drums, tanks, or similar containers. This practice does not address general guidelines for planning waste sampling activities (Guide D 4687), development of data quality objectives (Practice D 5792), the design of monitoring systems and determination of the number of samples to collect (Practice D 6311), in situ measurement of parameters of interest, data assessment and statistical interpretation of resultant data (Guide D 6233), sample preservation, sampling and field quality assurance (Guide D 5612), or the selection of sampling locations or obtaining a representative sample (Guide D 6044).1.1 This practice describes sampling devices and procedures for collecting samples of liquids or sludges, or both, whose upper surface can be accessed by the suitable device. These devices may be used to sample tanks that have an appropriately sized and located sampling port. 1.2 This practice describes and discusses the advantages and limitations of the following commonly used equipment, some of which can be used for both grab and discrete depth sampling: dipper, liquid grab sampler, swing jar sampler, Bacon Bomb, Kemmerer sampler, Discrete Level sampler, liquid profiler, lidded sludge/water sampler, peristaltic pump, and the Syringe sampler. 1.3 This practice provides instructions on the use of these samplers. 1.4 This practice does not address sampling devices for collecting ground water. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Practice for Sampling Liquids Using Grab and Discrete Depth Samplers

DB31/T 403-2008 城镇污水厂污泥应用于园林绿化的技术要求

本标准规定了以城镇污水厂污泥为原材料，经过无害化处理加工后用于绿化的土壤改良材料、栽培基质的产品质量表尊和应用技术要求。确立了用于绿化的土壤改良材料、栽培基质的污泥产品质量要求、使用技术要求和监测要求。 本标准不适用于工业污水处理厂产生的污泥，不适用于影响食物链的经济果林、农田和水源保护区的绿化林带。

Technology requirements for the utilization of sludge from municipal wastewater treatment plant on garden greening

DS/EN 15216:2008 废物表征 水和洗脱液中总溶解固体（TDS）的测定

This European standard specifies a method for the determination of total dissolved solids (TDS) in water and eluates, provided they are not volatile under the conditions specified or that they do not release water molecules from hydration. It applies to water and eluates containing more than 200 mg/l of total dissolved solids. Samples with lower amounts of dissolved solids can be analyzed by repetition of the drying step.

Characterization of waste - Determination of total dissolved solids (TDS) in water and eluates

LST EN 15216-2008 废物表征 水和洗脱液中总溶解固体（TDS）的测定

Characterization of waste - Determination of total dissolved solids (TDS) in water and eluates