13.040.01 空气质量综合 标准查询与下载

T/QDAS 009-2018 重大活动公共场所室内空气质量控制规范

本标准规定了重大活动公共场所的术语和定义、材料、工程施工、验收。 本规范适用于新建、扩建和改建的重大活动公共场所室内环境污染控制，不适用于有特殊净化卫生要求的室内环境污染控制。

Management code for indoor air quality control at public areas for major events

KS I ISO 11057-2018 空气质量 - 可清洁过滤介质的过滤表征的测试方法

Air quality — Test method for filtration characterization of cleanable filter media

KS I ISO 11057:2018 空气质量 - 可清洁过滤介质的过滤表征的测试方法

Air quality — Test method for filtration characterization of cleanable filter media

T/SICCA 005-2018 酒店室内空气质量标准

     本标准设置了“范围”、“规范性引用文件”、“术语和定义”、“酒店空气质量要求”、“检测方法”共五章内容。       重要章节是第四章 酒店空气质量要求。       常规的设置是前3章（范围、规范性引用文件、术语和定义）， “酒店空气质量要求”、“检测方法”的内容根据GB/T 1.1-2009《标准化工作导则》给出的规则起草。

Hotel air quality standard

DB33/T 2167-2018 燃煤电厂固定污染源废气低浓度排放监测技术规范

Technical specification for low-concentration emission monitoring of waste gas from stationary pollution sources in coal-fired power plants

ISO/TS 11665-12:2018 环境中放射性的测量 - 空气:氡222 - 第12部分:防水材料中扩散系数的测定:膜单面活性浓度测定法

Measurement of radioactivity in the environment — Air: radon-222 — Part 12: Determination of the diffusion coefficient in waterproof materials: membrane one-side activity concentration measurement met

DB11/T 1564-2018 种植农产品温室气体排放核算指南

Guidelines for Accounting Greenhouse Gas Emissions from Planting Agricultural Products

DB11/T 1561-2018 农业有机废弃物（畜禽粪便）循环利用项目碳减排量核算指南

Guidelines for Carbon Emission Reduction Accounting for Agricultural Organic Waste (Livestock Manure) Recycling Projects

DB11/T 1562-2018 农田土壤固碳核算技术规范

Technical Specifications for Farmland Soil Carbon Sequestration Accounting

DB11/T 1565-2018 畜牧产品温室气体排放核算指南

Guidelines for Accounting Greenhouse Gas Emissions of Livestock Products

DB11/T 1563-2018 农业企业（组织）温室气体排放核算和报告通则

General Rules for Accounting and Reporting Greenhouse Gas Emissions of Agricultural Enterprises (Organizations)

ASTM D4619-12(2018) 运行烟气脱硫系统中衬里的检验标准实施规程

1.1 This practice describes procedures for conducting inspections of the conditions of various linings in operating Flue Gas Desulfurization (FGD) system components. 1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. For specific hazard statements, see Section 8. 1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Practice for Inspection of Linings in Operating Flue Gas Desulfurization Systems

ASTM D6245-18 使用室内二氧化碳浓度评价室内空气质量和通风的标准指南

1.1 This guide describes how measured values of indoor carbon dioxide (CO2) concentrations can be used in evaluations of indoor air quality and building ventilation. 1.2 This guide describes the determination of CO2 generation rates from people as a function of body size and level of physical activity. 1.3 This guide describes the experimentally-determined relationship between CO2 concentrations and the acceptability of a space in terms of human body odor. 1.4 This guide describes the following uses of indoor CO2 concentrations to evaluate building ventilation–mass balance analysis to determine the percent outdoor air intake at an air handler, the tracer gas decay technique to estimate whole building air change rates, and the constant injection tracer gas technique at equilibrium to estimate whole building air change rates. 1.5 This guide discusses the use of continuous monitoring of indoor and outdoor CO2 concentrations as a means of evaluating building ventilation and indoor air quality. 1.6 This guide discusses some concentration measurement issues, but it does not include or recommend a method for measuring CO2 concentrations. 1.7 This guide does not address the use of indoor CO2 to control outdoor air intake rates. 1.8 Units—The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.9 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.10 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Guide for Using Indoor Carbon Dioxide Concentrations to Evaluate Indoor Air Quality and Ventilation

ASTM D5702-18 用于分析重金属的涂层膜的现场取样的标准实施规程

1.1 This practice covers a method to control the removal of samples of coating films from substrates for subsequent laboratory analysis for heavy metal content on a mass basis. This technique can be used in the field, the fabricating shop, or laboratory. 1.2 The values stated in SI units are to be regarded as the standard. The values in parentheses are for information only. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. For specific hazard information, see Section 5, Note 1, and Note 3. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Practice for Field Sampling of Coating Films for Analysis for Heavy Metals

KS I ISO 7168-1-2017 空气质量数据交换第1部分:通用数据格式

Air quality－Exchange of data－Part 1：General data format

KS I ISO 7168-1:2017 空气质量 数据交换 第1部分：一般数据格式

Air quality－Exchange of data－Part 1：General data format

DB35/T 1727-2017 大气环境损害鉴定评估技术方法

本标准规定了大气环境损害鉴定评估的术语和定义、鉴定评估原则、鉴定评估一般要求、大气环境损害调查与损害确定、因果关系分析、大气环境损害实物量化和大气环境损害价值量化等内容。 本标准适用于因违法排污以及突发环境事件直接导致大气环境损害的鉴定评估。 本标准不适用于因核与辐射所致大气环境损害的鉴定评估以及因大气环境损害导致的人身损害和 财产损害的鉴定评估。

Atmospheric environment damage appraisal and assessment technical method

DB23/T 2011-2017 大气颗粒物来源解析监测指南

Guidelines for Source Apportionment and Monitoring of Atmospheric Particulate Matter

ISO/TS 11665-13:2017 环境中放射性的测量 - 空气:氡222 - 第13部分:防水材料扩散系数的测定:膜两侧活性浓度测定法

Measurement of radioactivity in the environment — Air: radon 222 — Part 13: Determination of the diffusion coefficient in waterproof materials: membrane two-side activity concentration test method

ASTM D4096-17 测定大气中总悬浮颗粒物的标准试验方法（High&x2013；体积取样器法）

1.1 This test method provides for sampling a large volume of atmosphere, 1600 to 2400 m3 (55 000 to 85 000 ft3 ), by means of a high flow-rate vacuum pump at a rate of 1.13 to 1.70 m3 /min (40 to 60 ft3 /min) (1-4).2 1.2 This flow rate allows suspended particles having diameters of less than 100 µm (stokes equivalent diameter) to be collected. However, the collection efficiencies for particles larger than 20 µm decreases with increasing particle size and it varies widely with the angle of the wind with respect to the roof ridge of the sampler shelter and with increasing speed (5). When glass fiber filters are used, particles within the size range of 100 to 0.1 µm diameters or less are ordinarily collected. 1.3 The upper limit of mass loading will be determined by plugging of the filter medium with sample material, which causes a significant decrease in flow rate (see 6.4). For very dusty atmospheres, shorter sampling periods will be necessary. The minimum amount of particulate matter detectable by this method is 3 mg (95 % confidence level). When the sampler is operated at an average flow rate of 1.70 m3 /min (60 ft3 /min) for 24 h, this is equivalent to 1 to 2 µg/m3 (3). 1.4 The sample that is collected may be subjected to further analyses by a variety of methods for specific constituents. 1.5 The values stated in SI units are to be regarded as standard. The values given in parentheses are mathematical conversions to inch-pound units that are provided for information only and are not considered standard. 1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.7 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Determination of Total Suspended Particulate Matter in the Atmosphere (High–Volume Sampler Method)