13.060.20;91.140.60 标准查询与下载

DIN 19636-100:2008 饮用水装置用软化剂(阴阳离子交换剂).第100部分:依据DIN EN 14743的软化剂的使用要求

Softeners (cation exchangers) for drinking water installation - Part 100: Requirements for application of softeners in accordance with DIN EN 14743

DIN EN 15219:2008 建筑物内水调节设备.硝酸盐的去除装置.性能、安全和测试要求

This European Standard specifies requirements relating to the construction and mode of operation and relevant methods for testing automatic, salt-regenerated, anion exchange nitrate removal devices for drinking water installations inside buildings, which are permanently connected to the mains supply. NOTE Products intended for use in water supply systems are to comply, when existing, with national regulations and testing arrangements that ensure fitness for contact with drinking water. The Member State's relevant regulators and the EC Commission agreed on the principle for a future unique European Acceptance Scheme (EAS) which would provide a common testing and approval arrangement at European level. If and when the EAS is adopted, European Standards on products will be amended by the addition of an Annex Z/EAS under Mandate M/136, which will contain formal references to the testing, certification and product marking requirements of the EAS. Until the EAS comes into force, the current national regulations remain applicable.

Water conditioning equipment inside buildings - Nitrate removal devices - Requirements for performance, safety and testing(includes Amendment A1:2007); English version of DIN EN 15219:2008-02

VDI 6006-2008 饮用水装置中的压力波动 原因、噪声排放和预防

The document applies to drinking-water installations in which certain events may cause sudden pressure increases within the system, which in turn may give rise to annoying noise generation and damage. The guideline describes the processes in watercarrying pipe systems and the connected pumps, valves and appliances capable of generating pressure surges during their operation. This guideline offers building owners, commercial enterprises, building services engineers, structural engineers and users guidance on how to avoid inadmissible pressure surges and thus annoying noise and damage. It is addressed to any person involved, either directly or indirectly, in the design, construction and maintenance of building services. The guideline deals with the causes of pressure surges including the associated annoyance by noise and the damage caused; it provides guidance on design, building construction and the operation of water- carrying pipes and the connected pumps, shut-off and tap valves as well as measures serving to reduce or avoid pressure surges. Guidance is also given regarding potential damage to the installations, caused by pressure surges, and the avoidance of inadmissible noise.

"Pressure surges in drinking-water installations - Causes, noise emissions and prevention"

LST EN 13443-1+A1-2007 建筑物内的水调节设备 机械过滤器 第1部分：颗粒等级 80 微米至 150 微米 性能、安全和测试要求

Water conditioning equipment inside buildings - Mechanical filters - Part 1: Particle rating 80 µm to 150 µm - Requirements for performances, safety and testing

NF P41-600-1*NF EN 13443-1+A1:2007 建筑物内水处理设备.机械过滤器.第1部分:颗粒额定值80Šm～150Šm.性能、安全和测试要求

Water conditioning equipment inside buildings - Mechanical filters - Part 1 : particle rating 80 Šm to 150 Šm - Requirements for performances, safety and testing.

DIN EN 13443-1:2007 建筑物内水处理设备.机械过滤器.第1部分:颗粒额定值80Šm～150Šm.性能、安全和测试要求

Part 1 of this European Standard applies to mechanical filters for drinking water installations inside buildings, of nominal size from DN 15 to DN 100, minimum nominal pressure PN10, particle rating of 80 IJm to 150 μm, and maximum design temperature of 30 ℃. It specifies requirements relating to the construction and mode of operation of filters and describes relevant methods of testing. It only concerns units which are permanently connected to the mains supply at the point of entry into the building. Part 2 of this European Standard EN 13443-2:2005+A1 is a separate document and deals with filters with a particle size limit less than 80 μm.

Water conditioning equipment inside buildings - Mechanical filters - Part 1: Particle rating 80 μm to 150 μm - Requirements for performances, safety and testing (includes Amendment A1:2007); English version of DIN EN 13443-1:2007-12

LST EN 14652+A1-2007 建筑物内的水调节设备 膜分离装置 性能、安全和试验要求

Water conditioning equipment inside buildings - Membrane separation devices - Requirements for performance, safety and testing

LST EN 14897+A1-2007 建筑物内水调节设备使用汞低压紫外线辐射器的设备性能、安全和试验要求

Water conditioning equipment inside buildings - Devices using mercury low-pressure ultraviolet radiators - Requirements for performance, safety and testing

LST EN 13443-2+A1-2007 建筑物内的水调节设备 机械过滤器 第2部分：1 微米至小于 80 微米的颗粒等级 性能、安全和测试要求

Water conditioning equipment inside buildings - Mechanical filters - Part 2: Particle rating 1 µm to less than 80 µm - Requirements for performance, safety and testing

LST EN 14898+A1-2007 建筑物内的水调节设备 活性介质过滤器 性能、安全和测试要求

Water conditioning equipment inside buildings - Active media filters - Requirements for performance, safety and testing

LST EN 14812+A1-2007 建筑物内的水调节设备 化学加药系统 预设加药系统 性能、安全和测试要求

Water conditioning equipment inside buildings - Chemical dosing systems - Pre-set dosing systems - Requirements for performance, safety and testing

DIN EN 13443-2:2007 建筑物内水调节设备.机械过滤器.第2部分:颗粒额定值1μm到80μm(不含80μm).性能、安全和测试要求

This document specifies requirements relating to the construction, performance and methods of testing for mechanical filters for the removal of suspended matter in drinking water installations inside buildings. It applies to filters with a filtration rating from 1 pm up to less than 80 μm and which are intended for use in systems with a minimum pressure rating of PN 6, connections between DN 15 and DN 100 and service temperature of less than 30 ℃. This document is applicable to back-washable filters, integral filters and those designed for replaceable cartridges. It only concerns units that are permanently connected to the mains supply at point of entry or point of use. Part 1 of this standard (EN 13443-1) is a separate document and deals with filters with a particle rating between 80 μm and 150 μm.

Water conditioning equipment inside buildings - Mechanical filters - Part 2: Particle rating 1 Šm to less than 80 Šm - Requirements for performance, safety and testing; German version EN 13443-2:2005+A1:2007

NF P41-600-2*NF EN 13443-2+A1:2007 建筑物内部水调节设备.机械过滤器.第2部分:颗粒额定值为1Šm～80Šm(不含80Šm).性能、安全和测试要求

Water conditioning equipment inside buildings - Mechanical filters - Part 2 : particle rating 1 Šm to less than 80 Šm - Requirements for performance, safety and testing.

DIN EN 14652:2007 建筑物内水处理设备.薄膜分离设备.性能、安全和试验的要求

This European Standard specifies requirements relating to the construction, performance and methods of testing for membrane separation systems with a particle rating below 1μm,manely microfiltration (MF), ultrafiltration (UF), nanofiltration (NF), and reverse osmosis (RO) for drinking water installations inside buildings, intended to remove from the drinking water marginal concentrations of suspended and colloidal solids, microorganisms, organic molecules and/or to reduce the dissolved solids concentration and applies to systems with a minimum pressure of PN 10, connections between DN 15 and DN 100 and a maximum working temperature of at least 30℃. This European Standard applies to membrane separation systems, whose elements may be partly or entirely cleanable or disposable in accordance with the type of system. It only concerns units which are permanently connected to the mains supply at the point-of-use. A membrane separation system may include, together with the separation device pre-and/or post-treatment devices. For the scope of this European Standard: -- separation device shall comply with this European Standard, i.e. without pre-and/or post-treatment devices. -- where pre-and/or post-treatment devices are incorporated in the system, each of them shall conform to the relevant standard. If this is the case, the complete system shall be considered as conforming as a whole.

Water conditioning equipment inside buildings - Membrane separation devices - Requirements for performance, safety and testing（includes Amendment A1:2007） English version EN 14652:2007-09

DIN EN 14812:2007 建筑物内水处理设备.化学药品剂量.预调剂量系统.性能要求、安全和试验.德文版本EN 14812:2005+A1-2007

This European Standard specifies definitions, principles of construction (but not dimensions) and design, requirements on performance and operation as well as methods for testing the performance of chemical pre-set dosing systems for conditioning water intended for human consumption inside buildings (see [8]) which are permanently connected to the mains supply.

Water conditioning equipment inside buildings - Chemical dosing systems - Pre-set dosing systems - Requirements for performance, safety and testing（includes Amendment A1:2007） English version of DIN EN 14812:2007-09

EN 13443-1:2002+A1:2007 建筑物内的水调节设备.机械过滤器.第1部分:粒子等级80μM 150μM.性能,安全性和测试的要求

Part 1 of this European Standard applies to mechanical filters for drinking water installations inside buildings, of nominal size from DN 15 to DN 100, minimum nominal pressure PN10, particle rating of 80 µm to 150 µm, and maximum design temperature of 30 °C. It specifies requirements relating to the construction and mode of operation of filters and describes relevant methods of testing. It only concerns units which are permanently connected to the mains supply at the point of entry into the building. Part 2 of this European Standard (EN 13443-2:2005+A1) is a separate document and deals with filters with a particle size limit less than 80 µm.

Water conditioning equipment inside buildings - Mechanical filters - Part 1: Particle rating 80 µm to 150 µm - Requirements for performances, safety and testing

DIN EN 14897:2007 建筑物内水处理设备.水银低压紫外散热器的使用设备.性能、安全和试验要求

This document specifies definitions, principles of construction, requirements and methods for testing the performance of UV devices for drinking water installations inside buildings which are permanently connected to the mains supply at the point of entry into a building or within the water distribution system inside the building. UV devices in the sense of this standard are UV bactericidal treatment devices or UV disinfection devices.

Water conditioning equipment inside buildings - Devices using mercury low-pressure ultraviolet radiators - Requirements for performance, safety and testing（includes Amendment A1:2007） English version of DIN EN 14897:2007-09

DIN EN 14898:2007 建筑物内水处理设备.活性媒介过滤器.性能、安全和试验要求

This European Standard specifies requirements relating to the construction, performance and methods of active media filters for drinking water installations inside buildings, with a maximum working pressure of at least 1000kPa and a maximum working temperature of less than 30 ℃. It only concerns units, which are permanently connected to the mains supply at the point at the point of entry or point of use. This standard applies only to filter systems comprising a housing and filter media tested together. It includes capsule type units where both the element and its outer housing are disposable. NOTE Products intended for use in water supply systems should comply, when existing, with national regulations and testing arrangements that ensure fitness for contact with drinking water. The Member States relevant regulators and the EC Commission agreed on the principle of a future unique European Acceptance Scheme (EAS) which would provide a common testing and approval arrangement at European level. If and when the EAS is adopted, European Standards on products will be amended by the addition of an Annex Z/EAS under Mandate M/136 which will contain formal references to the testing, certification and produce marking requirements of the EAS. Until the EAS comes into force, the current national regulations remain applicable.

Water conditioning equipment inside buildings - Active media filters - Requirements for performance, safety and testing（includes Amendment A1:2007） English version of DIN EN 14898:2007-09

DIN 19628:2007 饮水装置用机械过滤器.要求.符合DIN EN 13443-1的机械过滤器的应用

Mechanical filters for drinking water installations - Application of mechanical filters according to DIN EN 13443-1

EN 14897:2006+A1:2007 建筑物内的水调节设备.汞低压紫外线散热器设备.性能,安全性和测试的要求

This document specifies definitions, principles of construction, requirements and methods for testing the performance of UV devices for drinking water installations inside buildings which are permanently connected to the mains supply at the point of entry into a building or within the water distribution system inside the building. UV devices in the sense of this standard are UV bactericidal treatment devices or UV disinfection devices.

Water conditioning equipment inside buildings - Devices using mercury low-pressure ultraviolet radiators - Requirements for performance, safety and testing