13.220 消防 标准查询与下载
共找到 168 条与 消防 相关的标准，共 12 页
Rural Fire Safety Management Regulations
- ICS
- 13.220
- CCS
- C81
- 发布
- 2010-09-01
- 实施
- 2010-10-01
Regulations on Fire Safety Management of Social Units
- ICS
- 13.220
- CCS
- C81
- 发布
- 2010-09-01
- 实施
- 2010-10-01
Specifications for acceptance of fire protection in construction projects
- ICS
- 13.220
- CCS
- C80
- 发布
- 2010-07-19
- 实施
- 2010-10-01
本标准规定了东北、内蒙古林区营林用火技术。 本标准适用于东北、内蒙古林区。秦岭、淮河以北的林区可参照使用。
Technical regulations for fire in forest management in Northeast and Inner Mongolia forest areas
- ICS
- 13.220
- CCS
- B65
- 发布
- 2010-02-09
- 实施
- 2010-06-01
本标准规定了紫胶原胶的质量要求、取样、检验方法、验收规则、标识、包装、运输、贮存要求。 本标准适用于中华紫胶虫(Kerria chinenisis Maldh.)或云南紫胶虫(Kerria yunnanensis Ou et Hong)所分泌的，成熟后从寄主树上采收下来，除去树枝、风干后供生产颗粒紫胶、紫胶片等产品使用的原料紫胶。
Sticklac
- ICS
- 13.220
- CCS
- B72
- 发布
- 2010-02-09
- 实施
- 2010-06-01
本标准规定了消防摩托车的术语和定义、分类与型号、性能要求、试验方法、检验规则、标志、包装、运输、贮存和使用说明书等。 本标准适用于消防摩托车。
Fire motorcycles
- ICS
- 13.220
- CCS
- C84
- 发布
- 2008-04-24
- 实施
- 2008-06-01
이 규격은 특히 소화기로 화재를 소화하는 상황에서, 연료 성질에 대해 정의될 수 있는 화재
Classification of fire
- ICS
- 13.220
- CCS
- J74
- 发布
- 2007-11-12
- 实施
- 2007-11-12
本标准规定了民用航空运输机场(以下简称机场)飞行区消防设施的设置要求。 本标准适用于民用航空运输机场(含军民合用机场的民用部分)飞行区消防没施的设置，通用航空机场可参照本标准执行。
The fire-fighting facilities in the aerodrome at airports serving civil aviation transportation
- ICS
- 13.220
- CCS
- C80
- 发布
- 2007-08-30
- 实施
- 2007-12-01
Configuration design and installation specification of pulse dry powder automatic fire extinguishing device
- ICS
- 13.220
- CCS
- P16
- 发布
- 2005/03/29
- 实施
- 2005/03/29
本标准规定了细水雾灭火系统分类与基本参数、性能要求、试验方法、检验规则、标志、包装、运输存和使用说明书编写要求。本标准适用于细水雾灭火系统及其零部件。
Performance Requirements and Method of Test for Water Mist Fire Extinguishing Systems and Components
- ICS
- 13.220
- CCS
- C83
- 发布
- 2005-03-25
- 实施
- 2005-07-01 00:00:00
本规范规定了消防安全标志的术语、总则、设置场所与设置技术要求、施工要求和验收要求；本规范适用于重庆市辖区内新建、改建及扩建的民用建筑、工业建筑、地下建筑、平战结合的人民防空工程以及建筑内部装修中设置的消防安全标志的设计、施工和验收。
Code of Design、Installation and Acceptance of Fire Safety Signs
- ICS
- 13.220
- CCS
- P16
- 发布
- 2004-12-30
- 实施
- 2005-05-01
本标准规定了建筑工程消防验收评定的术语、总则和总平面布局和平面布置、防火防烟分区和建筑构造、安全疏散和消防电梯、防烟排烟系统和通风空气调节、消防电源及配电、火灾自动报警系统、消防水灭火系统、泡沫灭火系统、气体灭火系统、建筑内部装饰、建筑灭火装置的要求和验收方法。本标准适用于重庆市行政辖区内的新建、改建、扩建工程，建筑内部装修以及建筑用途变更的消防验收。公众聚集场所使用或者开业前的消防安全检查可参照本标准执行。
Code for fire acceptance of construction engineering
- ICS
- 13.220
- CCS
- P16
- 发布
- 2004-12-30
- 实施
- 2005-05-01
本标准规定了阻燃装饰织物的分类、标记、技术要求、试验程序、检验规则及包装和标志。 本标准适用于窗帘、幕布、家具包布等装饰用纺织品。 本标准不适用于铺地织物。
Flame-retardant decorative textile
- ICS
- 13.220
- CCS
- C84
- 发布
- 2004-06-17
- 实施
- 2004-10-01
本标准规定了照明消防车的技术要求、试验方法、检验规则。 本标准适用于照明消防车。(以下简称照明车)。 本标准也适用于装有独立发电系统，并兼用于破拆抢险、排烟、照明等的其他类型消防车辆。
Lighting tower fire vehicle
- ICS
- 13.220
- CCS
- C84
- 发布
- 2003-11-07
- 实施
- 2004-06-01
This standard is concerned with the methods of testing wheeled mobile fire extinguishers
Method of testing mobile fire extinyuishers.
- ICS
- 13.220
- CCS
- 发布
- 2002-10-21
- 实施
This standard is concerned with mobile fire extinguishers using carbon dioxide as the extinguishing medium
Fire extinguisher - Part 5: Mobile carbon dioxide fire extinguishers.
- ICS
- 13.220
- CCS
- 发布
- 2002-10-21
- 实施
This standard is concerned with wheeled mobile fire extinguishers using dry powder.
Fire extinyuishers part 6- mobilc dry -powder extinyuishers.
- ICS
- 13.220
- CCS
- 发布
- 2002-10-21
- 实施
This technical specification describes the calculation procedure for converting the data generated by chemical analysis in IEC 60695-7-50 into predicted toxic potency data for material tested under defined conditions. This is in order to estimate the contribution of the fire effluent of an end-product or material to the toxic threat to life of the total fire effluent resulting from a fire scenario in which the end-product or material is involved. This method may also be suitable for converting data from other relevant test methods into predicted toxic potency, provided that the form and format of the data is compatible with that of IEC 60695-7-50. One of the responsibilities of a technical committee is, wherever applicable, to make use of basic safety publications in the preparation of its publications. This method is intended to be consistent with the principles advanced in IEC 60695-7-3, and ISO/TR 9122-5. It is designed specifically to make use of results in the form expressed in the laboratory test method described in IEC 60695-7-50. Toxic potency values are only of use in toxic hazard estimations, and must not be used in isolation.
Fire hazard testing - Part 7-51: Toxicity of fire effluent - Estimation of toxic potency: Calculation and interpretation of test results
- ICS
- 13.220
- CCS
- C80
- 发布
- 2002-03-26
- 实施
