13.220.10 灭火 标准查询与下载

GSO ISO 14520-15:2021 气体灭火系统物理特性和系统设计 第15部分：IG-541灭火剂

ISO 14520-15:2015 contains specific requirements for gaseous fire-extinguishing systems, with respect to the IG-541 extinguishant. It includes details of physical properties, specification, usage, and safety aspects. ISO 14520-15:2015 covers systems operating at nominal pressures of 150 bar, 200 bar, and 300 bar at 15 °C. This does not preclude the use of other systems, although design data for other pressures are not available at this time.

Gaseous fire-extinguishing systems — Physical properties and system design — Part 15: IG-541 extinguishant

GSO ISO 7076-3:2021 消防 泡沫灭火系统 第3部分：中倍数泡沫设备

ISO 7076-3:2016 specifies requirements and test methods for medium expansion foam equipment of fixed-foam extinguishing systems for indoor or outdoor use or both.

Fire protection — Foam fire extinguishing systems — Part 3: Medium expansion foam equipment

GSO ISO 4642-2:2021 消防用橡胶和塑料软管 不可折叠 第2部分：泵和车辆用半刚性软管（和软管组件）

ISO 4642-2:2015 specifies the requirements and test methods for semi-rigid reel hoses for use on fire-fighting vehicles and trailer pumps. The hoses are intended for use at a maximum working pressure of 1,5 MPa for normal pressure hoses (category I) and 4,0 MPa for high pressure hoses (category II). The hoses are further subdivided into types and classes (see Clause 4). ISO 4642-2:2015 applies to delivery hoses for fire-fighting purposes intended for use at a minimum ambient temperature of −20 °C. Hoses conforming to this part of ISO 4642 are intended to be used with fire hose couplings conforming to the relevant national standards couplings. Requirements are also given for hose assemblies (see 6.12) where these are fitted by the hose manufacturer. NOTE 1 Hoses for use at temperatures lower than −20 °C can be supplied by agreement between the manufacturer and purchaser. NOTE 2 All pressures are expressed in megapascals where 1 MPa = 10 bar.

Rubber and plastics hoses, non-collapsible, for fire-fighting service — Part 2: Semi-rigid hoses (and hose assemblies) for pumps and vehicles

GSO ISO 14520-12:2021 气体灭火系统物理特性和系统设计 第12部分：IG-01灭火剂

ISO 14520-12:2015 contains specific requirements for gaseous fire-extinguishing systems, with respect to the IG-01 extinguishant. It includes details of physical properties, specification, usage, and safety aspects. ISO 14520-12:2015 covers systems operating at nominal pressures of 160 bar, 200 bar, and 300 bar at 15 °C. This does not preclude the use of other systems, although design data for other pressures are not available at this time.

Gaseous fire-extinguishing systems — Physical properties and system design — Part 12: IG-01 extinguishant

GSO ISO 14520-13:2021 气体灭火系统物理特性和系统设计 第13部分：IG-100灭火剂

ISO 14520-13:2015 contains specific requirements for gaseous fire-extinguishing systems, with respect to the IG-100 extinguishant. It includes details of physical properties, specification, usage and safety aspects. ISO 14520-13:2015 covers systems operating at nominal pressures of 200 bar at 15 °C and 300 bar at 15 °C. This does not preclude the use of other systems, although design data for other pressures are not available at this time.

Gaseous fire-extinguishing systems — Physical properties and system design — Part 13: IG-100 extinguishant

GSO ISO 7076-4:2021 消防 泡沫灭火系统 第4部分：高倍泡沫设备

ISO 7076-4:2016 specifies requirements and test methods for high expansion foam equipment of fixed-foam extinguishing systems for indoor or outdoor use or both.

Fire protection — Foam fire extinguishing systems — Part 4: High expansion foam equipment

SN EN ISO 14557:2021 消防软管 橡胶和塑料吸入软管和软管组件（ISO 14557:2021）

Fire-fighting hoses - Rubber and plastics suction hoses and hose assemblies (ISO 14557:2021)

OENORM EN ISO 21805:2021 通风口的设计、选择和安装指南，以保护受气体灭火系统保护的外壳的结构完整性（ISO/DIS 21805:2021）

Guidance on design, selection and installation of vents to safeguard the structural integrity of enclosures protected by gaseous fire-extinguishing systems (ISO/DIS 21805:2021)

NF S61-510/A2:2021 消防和救援服务车辆 共同要素的要求

Rescue and fire-fighting service vehicles - Requirements for common elements

ASTM D5631-21 哈龙1301溴三氟甲烷（CF3Br）的搬运、运输和储存的标准实施规程

1.1?This practice covers guidance and direction to suppliers, recyclers, reclaimers, purchasers, and users in the handling, transportation, and storage of Halon 1301. 1.2?The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are m

Standard Practice for Handling, Transportation, and Storage of Halon 1301, Bromotrifluoromethane (CF3Br)

ASTM D6541-21 HFC-236fa 1,1,3,3,3-六氟丙烷的标准规范（CF3CH2CF3）

1.1 This specification covers the requirements for HFC236fa as a fire-fighting medium. 1.2 This specification does not address the fire-fighting equipment or hardware that employs HFC-236fa or the conditions of employing such equipment (for example, hand-helds, fixed installations, and so forth). 1.3 This specification does not address the storage or transportation of HFC-236fa. Storage, handling, and transportation issues are addressed in Practice D6427. 1.4 The values stated in SI units are to be regarded as standard. The values given in parentheses after SI units are provided for information only and are not considered standard. 1.5 The following safety hazards caveat pertains to the test methods portion, Section 6, of this specification. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. A specific warning statement is given in 4.3. 1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for HFC-236fa, 1,1,1,3,3,3–Hexafluoropropane, (CF3CH2CF3)

ASTM D7815-21 哈龙1211溴氯二氟甲烷（CF2BrCl）的搬运、运输和储存的标准实施规程

1.1 This practice covers guidance and direction to suppliers, recyclers, reclaimers, purchasers, and users in the handling, transportation, and storage of Halon 1211. 1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Practice for Handling, Transportation, and Storage of Halon 1211, Bromochlorodifluoromethane (CF2BrCl)

ASTM D6126/D6126M-21 HFC-23（三氟甲烷CHF3）的标准规范

1.1?This specification covers the requirements for HFC-23 as a fire fighting medium. 1.2?This specification does not address the fire fighting equipment or hardware that employs HFC-23 or the conditions of employing such equipment (for example: handshields, fixed installations,

Standard Specification for HFC-23 (Trifluoromethane, CHF3)

ASTM D6427-21 HFC-236fa 1,1,1,3,3,3-六氟丙烷（CF3CH2CF3）的搬运、运输和储存的标准实施规程

1.1 This practice covers guidance and direction to suppliers, purchasers, and users in the handling, transportation, and storage of HFC-236fa. 1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Practice for Handling, Transportation, and Storage of HFC-236fa, 1,1,1,3,3,3-Hexafluoropropane (CF3CH2CF3)

ASTM D7327-21 HFC Blend B标准规范（CH2FCF3 CHF2CF3 CO2）

1.1?This specification covers requirements for HFC Blend B as a fire-fighting medium. 1.2?This specification does not address the fire-fighting equipment or hardware that employs HFC Blend B or the conditions of employing such equipment (for example, handhelds, fixed installati

Standard Specification for HFC Blend B (CH2FCF3, CHF2CF3, and CO2)

ASTM D6127-21 HFC-23（三氟甲烷CHF3的搬运、运输和储存的标准实施规程

1.1?This practice covers guidance and direction to suppliers, purchasers, and users in the handling, transportation, and storage of HFC-23. 1.2?The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to

Standard Practice for Handling, Transportation, and Storage of HFC-23 (Trifluoromethane, CHF3)

ASTM D6231/D6231M-21 HFC-125（五氟乙烷 C2HF5）的标准规范

1.1 This specification covers the requirements for HFC-125 as a fire-fighting medium. 1.2 This specification does not address the fire-fighting equipment or hardware that employs HFC-125 or the conditions of employing such equipment, for example, hand helds, fixed installations, etc. 1.3 This specification does not address the storage or transportation of HFC-125. Storage, handling, and transportation issues are addressed in Practice D6268. 1.4 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system are not necessarily exact equivalents; therefore, to ensure conformance with the standard, each system shall be used independently of the other, and values from the two systems shall not be combined. 1.5 The following safety hazards caveat pertains to the test methods portion, Section 6, of this specification. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. Specific hazards statements are given in 4.3. 1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for HFC-125 (Pentafluoroethane, C2HF5)

EC 1-2021 UNI EN 1869-2021 灭火毯

Fire blankets

ASTM D6065-21 HFC-227ea 1,1,1,2,3,3,3-七氟丙烷（CF3CHFCF3）的搬运、运输和储存的标准实施规程

1.1?This practice covers guidance and direction to suppliers, reclaimers, purchasers, and users in the handling, transportation, and storage of HFC-227ea. 1.2?The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical

Standard Practice for Handling, Transportation, and Storage of HFC-227ea 1,1,1,2,3,3,3-Heptafluoropropane (CF3CHFCF3)

ASTM D7673/D7673M-21 卤代烷1211溴氯二氟甲烷（CF2BrCl）的标准规范

1.1 This specification covers the requirements for Halon 1211 as a fire-fighting medium. 1.2 This specification does not address the fire-fighting equipment or hardware that employs Halon 1211 or the conditions of employing such equipment (for example, handhelds, fixed installations, etc.). 1.3 This specification does not address the storage or transportation of Halon 1211. Storage, handling, and transportation issues are addressed in Practice D7815. 1.4 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system are not necessarily exact equivalents; therefore, to ensure conformance with the standard, each system shall be used independently of the other, and values from the two systems shall not be combined. 1.5 The following safety hazards caveat pertains only to the test methods portion, Section 6, of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. Specific hazards statements are given in Section 4. 1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Halon 1211, Bromochlorodifluoromethane (CF2BrCl)