13.220.20 防火 标准查询与下载

KS B ISO 6182-6-2022 消防 自动喷水灭火系统 第6部分：止回阀的要求和试验方法

Fire protection－Automatic sprinkler systems－Part 6：Requirements and test methods for check valves

KS B ISO 6182-7-2022 消防 自动喷水灭火系统 第7部分：早期抑制快速响应（ESFR）喷头的要求和试验方法

Fire protection－Automatic sprinkler systems－Part 7：Requirements and test methods for early suppression fast response(ESFR) sprinklers

DB50/T 1292-2022 建筑消防设施维护管理规范

本文件适用于建筑消防设施的维护管理

Specifications for maintenance and management of building fire protection facilities

T/DGAS 028-2022 独立式应急泡沫灭火装置

本文件规定了独立式应急泡沫灭火装置的术语和定义、型号编制方法、基本参数、要求、试验方法、检验规则、标志、使用说明书、包装、运输和贮存等内容。 本文件适用于有市政消防给水或有消防水池、水箱的环境，并以A/B类泡沫液为灭火介质的，用于扑救固体或液体火灾的半固定式空气泡沫灭火系统。 本文件涉及的产品适用于停车场、化工厂、木材加工厂、公路短隧道/桥梁两侧、古旧城区、棚户区、寺庙、市场、工业园区、加油站、充电站等场所。

Independent Equipment of emergency foam fire extinguishing systems

ISO 7240-31:2022 火灾探测和报警系统.第31部分:可复位线型热探测器

This document applies to resettable line-type heat detectors consisting of a sensing element distributed either continuously or discretely at close intervals along its length and connected to a sensor control unit, either directly or through an interface module, intended for use in fire detection and fire alarm systems installed in and around buildings and other civil engineering works. Examples of such technology are an optical fibre, a pneumatic tube, or an electrical sensor cable This document specifies the requirements and performance criteria, the corresponding test methods, and provides for the assessment. This document also covers resettable line-type heat detectors intended for use in the local protection of plants and equipment. This document does not cover non-resettable line-type heat detectors that can only respond once and are based on fixed temperature electrical cables.

Fire detection and alarm systems — Part 31: Resettable line-type heat detectors

DB11/T 2000-2022 建筑工程消防施工质量验收规范

Specifications for acceptance of fire protection construction quality in building engineering

T/CSEM 0011-2022 水基性无机防火涂料

本文件规定了水基性无机防火涂料的分类、理化性能、阻燃性、有害物质限量等技术要求、以及检验规则和标志、包装、运输、贮存、保质期的相关要求，描述了水基性无机防火涂料各项技术要求的试验方法。本文件适用于涂敷于纺织品和木材基材表面的水基性无机防火涂料的生产、检测等活动。

Water-based inorganic fireproof coating

DB14/T 2488-2022 老年人照料设施消防安全管理规范

本文件规定了老年人照料设施的消防安全管理要求。 本文件适用于床位数在10床以上的老年人照料设施（不包括社区养老、居家养老）的消防安全管理。其他专供老年人使用的、非集中照料的设施或场所，如老年大学、老年活动中心不适用于本文件。

Regulations on Fire Safety Management of Elderly Care Facilities

DB14/T 2489-2022 建筑消防设施维护保养规程

本文件规定了建筑消防设施维护保养的要求和方法。 本文件适用于消防技术服务机构在山西省内从事建筑消防设施维护保养工作。 单位自行开展建筑消防设施维护保养、保修期内的建筑消防设施由施工单位进行维护保养的，保养要求及方法、档案管理可参照执行。 特殊场所建筑消防设施的维护保养应符合其行业相关规定。

Maintenance rules for building fire protection facilities

22/30405472 DC 火灾探测和报警系统 第 7 部分：使用散射光、透射光或电离的点型烟雾探测器

Fire detection and alarm systems - Part 7. Point-type smoke detectors using scattered light, transmitted light or ionization

ISO/TS 7240-30:2022 火灾探测和报警系统.第30部分:视频火灾探测系统的设计、安装、调试和服务

Fire detection and alarm systems — Part 30: Design, installation, commissioning and service of video fire detector systems

22/30447464 DC BS EN 12845-3 固定消防系统 自动喷水灭火系统 第 3 部分：地震支撑指南

BS EN 12845-3. Fixed firefighting systems. Automatic sprinkler systems - Part 3. Guidance for earthquake bracing

T/IMAS 049-2022 灭火器维修管理规程

本文件规定了灭火器的维修条件、维修步骤、报废与回收、运输等技术要求。 本文件适用于干粉灭火器、二氧化碳灭火器、水基灭火器和洁净气体灭火器维修管理。

Code of practice for fire extinguisher maintenance management

ISO 7240-12:2022 火灾探测和报警系统.第12部分:使用透射光束的线型烟雾探测器

Fire detection and alarm systems — Part 12: Line type smoke detectors using a transmitted optical beam

22/30439190 DC BS EN 12259-12 固定消防系统 洒水装置和喷水系统部件 第 12 部分：泵

BS EN 12259-12. Fixed firefighting systems. Components for sprinkler and water spray systems - Part 12. Pumps

ANSI/CAN/UL/ULC 312:2022 消防用止回阀

1.1 These requirements cover check valves of 1 NPS and larger, used in piping systems supplying water for fire protection service. 1.2 The check valves covered by these requirements are intended for installation and use in accordance with the Standards for: a) Low-, Medium-, and High-Expansion Foam, NFPA 11; b) Installation of Sprinkler Systems, NFPA 13; c) Installation of Standpipe and Hose Systems, NFPA 14; d) Water Spray Fixed Systems for Fire Protection, NFPA 15; e) Installation of Foam-Water Sprinkler and Foam-Water Spray Systems, NFPA 16; f) Installation of Stationary Pumps For Fire Protection, NFPA 20; g) Water Tanks for Private Fire Protection, NFPA 22; h) Installation of Private Fire Service Mains and Their Appurtenances, NFPA 24; i) Water Mist Fire Protection Systems, NFPA 750; and j) Installation of Sprinkler Systems in Residential Occupancies Up to and Including Four Stories in Height, NFPA 13R. 1.3 Check valves covered by these requirements are intended for installation and use in accordance with, but not limited to the National Fire Code of Canada (NFC), and the National Building Code of Canada (NBC).

Check Valves for Fire-Protection Service

T/STSI 34-2022 防漏地上消防栓技术规范

1 术语和定义 2 产品结构和参数 3 一般要求 4技术要求 5 试验方法 6标志、包装、运输和贮存

Technical specification for leak proof aboveground fire hydrants

GSO ISO 7240-5:2022 火灾探测和火灾报警系统 第5部分：点型热探测器

ISO 7240-5:2018 specifies the requirements, test methods and performance criteria for point type heat detectors for use in fire detection and fire alarm systems for buildings (see ISO 7240‑1). For other types of heat detector, or for detectors intended for use in other environments, this document can be used for guidance only. Heat detectors with special characteristics and developed for specific risks are not covered by this document.

Fire detection and fire alarm systems — Part 5: Point type heat detectors

GSO ISO 7240-2:2022 火灾探测和报警系统 第2部分：火灾探测控制和指示设备

ISO 7240-2:2017 specifies requirements, test methods and performance criteria for fire detection control and indicating equipment (FDCIE) for use in fire detection and fire alarm systems installed in buildings. For the testing of other types of FDCIE, this document is intended to be used only for guidance. FDCIE with special characteristics, developed for specific risks, are not covered in ISO 7240-2:2017.

Fire detection and alarm systems — Part 2: Fire detection control and indicating equipment

GSO ISO 21927-8:2022 烟雾和热量控制系统 第8部分：烟雾控制风阀

ISO 21927-8:2017 applies to smoke control dampers, placed on the market and intended to operate as part of a pressure differential system or smoke and heat control system. This document specifies requirements and gives reference to the test methods defined for smoke control dampers and their associated components, such as actuators which are intended to be installed in such systems in buildings. Furthermore, provision on marking and information on installation and maintenance of these products are also given. ISO 21927-8:2017 distinguishes between two categories of smoke control dampers, i.e. single-compartment smoke control dampers and multi‑compartment fire-resisting smoke control dampers. Smoke control dampers covered by this document can be installed into smoke control system ducts or onto the ducts' surface. They can be installed also into a wall, floor or ceiling/roof elements or onto the surface of these elements. NOTE To avoid duplication, reference is made to a variety of other standards. To this end, this document can be read in conjunction with EN 13501‑4, EN 1366‑10 and ISO 10294‑1 for details of the furnace testing. ISO 21927-8:2017 does not consider in detail the detrimental and/or corrosive effects that can be caused by process chemicals present in the atmosphere, which are drawn through the system intentionally or inadvertently.

Smoke and heat control systems — Part 8: Smoke control dampers