13.220.40;29.020 标准查询与下载

IEC 60695-9-2:2014 着火危险试验. 第9-2部分: 表面火焰蔓延. 试验方法总结及相关

Fire hazard testing - Part 9-2: Surface spread of flame - Summary and relevance of test methods

IEC 60695-10-2:2014 着火危险测试.第10-2部分:不正常热.球压试验

Specifies the ball pressure test as a method for testing parts of non-metallic materials for resistance to heat. Includes the following significant technical changes from the previous edition: a) The post test water immersion time (see 7.1) has been chang

Fire hazard testing - Part 10-2: Abnormal heat; Ball pressure test

IEC 60695-2-11:2014 着火危险测试.第2-11部分:基于灼热/发热丝的试验方法.最终产品的灼热丝易燃性试验方法(GWEPT)

Fire hazard testing - Part 2-11: Glowing/hot-wire based test methods - Glow-wire flammability test method for end-products (GWEPT)

NF C20-924-11-10*NF EN 60695-11-10:2013 着火危险试验.第11-10部分:试验火焰.50 W水平及垂直火焰试验法

La présente partie de la CEI 60695 spécifie des modes opératoires d'essai à petite échelle en laboratoire pour comparer le comportement en combustion de différents matériaux utilisés dans les produits électrotechniques lorsque des éprouvettes d'essai en forme de barreau, en position verticale ou horizontale, sont exposées à une source d'allumage constituée d'une petite flamme, d'une puissance thermique nominale de 50 W. Ces méthodes d'essai déterminent la vitesse linéaire de combustion ou les propriétés d'auto-extinction des matériaux.Ces méthodes d'essai sont applicables aux matériaux solides et alvéolaires ayant une masse volumique apparente supérieure à

Fire hazard testing - Part 11-10 : test flames - 50 W horizontal and vertical flame test methods

IEC 60695-11-2:2013 着火危险试验. 第11-2部分: 试验火焰. 1 KW预混合火焰. 设备, 验证试验安排和指南

Fire hazard testing - Part 11-2: Test flames - 1 kW pre-mixed flame - Apparatus, confirmatory test arrangement and guidance

BS EN 60695-9-1:2013 着火危险试验. 火焰的表面扩展. 通用指南

Fire hazard testing. Surface spread of flame. General guidance

BS EN 60695-11-10:2013 着火危险试验. 试验火焰.50 W水平和垂直火焰的试验方法

Fire hazard testing. Test flames. 50 W horizontal and vertical flame test methods

DS/EN 60695-11-10:2013 火灾危险测试 第 11-10 部分：测试火焰 50 W 水平和垂直火焰测试方法

IEC 60695-11-10:2013 specifies small-scale laboratory test procedures intended to compare the burning behaviour of different materials used in electrotechnical products when vertically or horizontally oriented test bar specimens are exposed to a small fla

Fire hazard testing - Part 11-10: Test flames - 50 W horizontal and vertical flame test methods

DS/EN 60695-9-1:2013 火灾危险测试 第 9-1 部分：火焰表面蔓延 一般指南

IEC 60695-9-1:2013 provides guidance for the assessment of surface spread of flame for electrotechnical products and the materials from which they are formed. It provides: *an explanation of the principles of flame spread for both liquids and solids*guida

Fire hazard testing - Part 9-1: Surface spread of flame - General guidance

BS EN 60695-2-10:2013 着火危险试验. 基于灼热丝/发热丝的试验方法. 灼热丝装置及通用试验程序

Fire hazard testing. Glowing/hot-wire based test methods. Glow-wire apparatus and common test procedure

IEC 60695-11-10:2013 着火危险试验.第11-10部分:试验火焰.50 W水平及垂直火焰试验法

This part of IEC 60695 specifies small-scale laboratory test procedures intended to compare the burning behaviour of different materials used in electrotechnical products when vertically or horizontally oriented test bar specimens are exposed to a small flame ignition source with a nominal thermal power of 50 W. These test methods determine either the linear burning rate or the self-extinguishing properties of materials.

Fire hazard testing.Part 11-10: Test flames.50 W horizontal and vertical flame test methods

DIN EN 60695-11-4:2013 着火危险试验. 第11-4部分:试验火焰. 50 KW火焰. 设备和验证试验方法 (IEC 60695-11-4-2011); 德文版本EN 60695-11-4-2011

Fire hazard testing - Part 11-4: Test flames - 50 W flame - Apparatus and confirmational test method (IEC 60695-11-4:2011); German version EN 60695-11-4:2011

DIN EN 60695-7-2:2013 着火危险试验. 第7-2部分:燃烧废物的毒性. 试验方法概要和相关性 (IEC 60695-7-2-2011); 德文版本EN 60695-7-2-2011

Fire hazard testing - Part 7-2: Toxicity of fire effluent - Summary and relevance of test methods (IEC 60695-7-2:2011); German version EN 60695-7-2:2011

DIN EN 60695-7-3:2013 着火危险试验. 第7-3部分:燃烧废物的毒性. 试验结果的使用和说明 (IEC 60695-7-3-2011); 德文版本EN 60695-7-3-2011

Fire hazard testing - Part 7-3: Toxicity of fire effluent - Use and interpretation of test results (IEC 60695-7-3:2011); German version EN 60695-7-3:2011

IEC 60695-2-10:2013 着火危险试验.第2-10部分:基于灼热/发热丝的试验方法.灼热丝设备及通用试验规程

This part of IEC 60695 specifies the glow-wire apparatus and common test procedure to simulate the effects of thermal stresses which may be produced by heat sources such as glowing elements or overloaded resistors, for short periods, in order to assess the fire hazard by a simulation technique.

Fire hazard testing - Part 2-10: Glowing/hot-wire based test methods - Glow-wire apparatus and common test procedure

IEC TS 60695-6-30:2013 着火危险试验.第6-30部分:烟雾遮蔽.小规模静态试验.装置

This part of IEC 60695 describes the apparatus, calibration procedures and basic experimental procedures for the determination of the specific optical density of smoke produced by materials exposed vertically to a radiant heat source with or without the application of a pilot flame. The test specimens are of a defined size. The determination of the optical density is carried out in a pressure-controlled chamber previously calibrated with reference materials.

Fire hazard testing - Part 6-30: Smoke obscuration - Small-scale static method - Apparatus

IEC 60695-9-1:2013 着火危险试验.第9-1部分:火焰的表面扩展.通用指南

This part of IEC 60695provides guidance for the assessment of surface spread of flame for electrotechnical products and the materials from which they are formed. It provides: • an explanation of the principles of flame spread for both liquids and solids, • guidance for the selection of test methods, • guidance on the use and interpretation of test results, and • informative references

Fire hazard testing - Part 9-1: Surface spread of flame - General guidance

IEC TS 60695-6-31:2013 着火危险试验.第6-31部分:烟雾遮蔽.小规模静态试验.材料

Fire hazard testing - Part 6-31: Smoke obscuration - Small-scale static test - Materials

JIS C 60695-2-13:2013 着火危险试验.第2-13部分:材料的灼热丝起燃性试验方法.材料的灼热丝燃点温度(GWIT)试验方法

This Standard specifies the details of the glow-wire test to be applied to test specimens of solid electrical insulating materials or other solid materials for ignitability testing to determine the glow-wire ignition temperature (GWIT).

Fire hazard testing.Part 2-13: Glowing/hot-wire based test methods.Glow-wire ignition temperature (GWIT) test method for materials

GOST IEC 60695-10-2-2013 着火危险试验. 第10-2部分. 异常热. 球压试验

Fire hazard testing. Part 10-2. Abnormal heat. Ball pressure test