13.220.40;29.020 标准查询与下载

BS DD IEC/TS 60695-1-20:2008 火灾试验.电工产品火灾评估指南.可燃性.通用指南

IEC 60695-1-20, which is a technical specification provides guidance on the ignitability of electrotechnical products and the materials from which they are formed. It gives guidance on; a) the principles of ignitability, b) the selection of appropriate test methods, and c) the use and interpretation of results. This technical specification is intended for use by technical committees in preparation of standards in accordance with the principles laid down IEC Guide 104 and ISO/IEC Guide 51. One of the responsibilities of a technical committee is, wherever applicable, to make use of basic safety publications in the preparation of its publications. The requirements, test methods or test conditions of this basic publication will not apply unless specifically referred to or included in the relevant publications.

Fire hazard testing - Guidance for assessing the fire hazard of electrotechnical products - Ignitability - General guidance

IEC 60695-8-1:2008 着火危险试验.第8-1部分:放热.一般指南

This part of IEC 60695 provides guidance on the measurement and interpretation of heat release from electrotechnical products and materials from which they are constructed. Heat release data can be used as part of fire hazard assessment and in fire safety engineering, as described in the future IEC 60695-1-10 [1] and the future IEC 60695-1-1112]. This basic safety publication is intended for use by technical committees in the preparation of standards in accordance with the principles laid down in IEC Guide 104 and ISO/IEC Guide 51. One of the responsibilities of a technical committee is, wherever applicable, to make use of basic safety publications in the preparation of its publications. The requirements, test methods or test conditions of this basic safety publication will not apply unless specifically referred to or included in the relevant publications.

Fire hazard testing - Part 8-1: Heat release - General guidance

IEC TS 60695-1-20:2008 火灾试验.第1-20部分:电工产品的火灾评估用指南.易燃性.通用指南

IEC 60695-1-20, which is a technical specification provides guidance on the ignitability of electrotechnical products and the materials from which they are formed. It gives guidance on; a) the principles of ignitability, b) the selection of appropriate test methods, and c) the use and interpretation of results. This technical specification is intended for use by technical committees in preparation of standards in accordance with the principles laid down IEC Guide 104 and ISO/IEC Guide 51. One of the responsibilities of a technical committee is, wherever applicable, to make use of basic safety publications in the preparation of its publications. The requirements, test methods or test conditions of this basic publication will not apply unless specifically referred to or included in the relevant publications.

Fire hazard testing - Part 1-20: Guidance for assessing the fire hazard of electrotechnical products - Ignitability - General guidance

ANSI/ASTM E1725:2008 电子系统元件用耐火隔离系统的着火试验用试验方法

These test methods cover fire-test-response. These fire-test-response test methods provide information on the temperatures recorded on the electrical system component within a fire-resistive barrier system during the period of exposure. This standard is used to measure and describe the response of materials, products, or assemblies to heat and flame under controlled conditions, but does not by itself incorporate all factors required for fire hazard or fire risk assessment of the materials, products, or assemblies under actual fire conditions. Potentially important factors and fire characteristics not addressed by these test methods include, but are not limited to: The performance of the fire-resistive barrier system constructed with components other than those tested. An evaluation of the functionality of the electrical system within the fire-resistive barrier system. An evaluation of the ampacity of the electrical system within the fire-resistive barrier system. An evaluation of the smoke, toxic gases, corrosivity, or other products of heating. A measurement of the flame spread characteristics over the surface of the fire-resistive barrier system. An evaluation of through-penetration sealing methods. Combustibility of materials in the fire-resistive barrier system or of the electrical system components. The need for supports beyond those normally required. Environmental conditions in the area of service. The values stated in inch-pound units are to be regarded as the standard. The SI units given in parentheses are for information only. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Test Methods For Fire Tests Of Fire Resistive Barrier Systems For Electrical System Components

DIN EN 60695-4:2007 火灾测试.第4部分:电工产品着火试验术语

The terms and definitions defined in this standard are applicable to fire tests for electrotechnical products. One of the responsibilities of a technical committee is, wherever applicable, to make use of basic safety publications in the preparation of its publications.

Fire hazard testing - Part 4: Terminology concerning fire tests for electrotechnical products (IEC 60695-4:2005); German version EN 60695-4:2006, text German, English and French

DS/EN 60695-10-2/Corr. 1:2007 火灾隐患测试 第 10-2 部分：异常发热 球压测试

This part of IEC 60695 specifies the ball pressure test as a method for testing parts of non-metallic materials for resistance to heat. It is applicable to electrotechnical equipment, its subassemblies and components, and to solid electrical insulating materials except ceramics. One of the responsibilities of a technical committee is, wherever applicable, to make use of basic safety publications in the preparation of its publications.

Fire hazard testing - Part 10-2: Abnormal heat - Ball pressure test

JIS C 60695-11-5:2007 燃烧物易燃性试验.第11-5部分:试验火焰.针状火焰试验方法.仪器、验证试验方法和指南

この規格は。火災危険をシミュレーション技術によって評価する手段として，故障状態によって生じる小さな炎の影響をシミュレートするためのニードルフレーム(注射針バーナ)試験について規定する。

Fire hazard testing -- Part 11-5: Test flames -- Needle-flame test method -- Apparatus, confirmatory test arrangement and guidance

IEC 89/807/DTS:2007 IEC 60695-1-20 TS 版本1.0:火灾试验.第1-20部分:可燃性.一般指南

IEC 60695-1-20 TS, Ed. 1.0: Fire hazard testing - Part 1-20: Ignitability - General guidance

JIS C 60695-11-10:2006 燃烧物易燃性试验.第11-10部分:试验火焰.50W水平的和垂直的火焰试验方法

この規格は，プラスチック及びその他の非金属材料の試験片を水平又は垂直に保持した状態で，公称54Wの炎にさらし，相対的な燃焼挙動を比較するための.試験室における小規模な燃焼試験方法について規定する。

Fire hazard testing -- Part 11-10: Test flames -- 50 W horizontal and vertical flame test methods

JIS C 60695-11-20:2006 火灾试验.第11-20部分:试验火焰.500W火焰试验方法

この規格は，プラスチック及びその他の非金属材料の試験片を公称500Wの炎にさらして。貫通孔及び相対的な燃焼挙動を比較するための，試験室での小規模な燃焼試験方法について規定する。

Fire hazard testing -- Part 11-20: Test flames -- 500 W flame test methods

JIS C 60695-1-30:2006 着火试验.第1-30部分:电工产品着火危险评定指南.预选试验程序的使用

この規格は，電気·電子製品，部品及び材料の火災危険性評価を行う場合の一般指針及び危険性評価のための入力値を提供する燃焼試験のデータと比較した，予備選択燃焼試験から得られるデータの意味，関連及び限界を評価するための指針について規定する。

Fire hazard testing -- Part 1-30: Guidance for assessing the fire hazard of electrotechnical products -- Use of preselection testing procedures

DIN EN 60695-9-1:2006 着火危险试验.第9-1部分:火焰的表面扩展.通用指南

Fire hazard testing - Part 9-1: Surface spread of flame - General guidance (IEC 60695-9-1:2005); German version EN 60695-9-1:2005

DS/EN 60695-6-1:2006 火灾隐患测试 第 6-1 部分：烟雾遮挡 一般指南

This part of IEC 60695 gives guidance on: a) optical measurement of smoke obscuration; b) general aspects of optical smoke test methods; c) consideration of test methods; d) expression of smoke test data; e) relevance of optical smoke data to hazard assessment. One of the responsibilities of a technical committee is, wherever applicable, to make use of basic safety publications in the preparation of its publications.

Fire hazard testing - Part 6-1: Smoke obscuration - General guidance

DS/EN 60695-9-1:2006 火灾危险测试 第 9-1 部分：火焰表面蔓延 一般指南

Provides guidance for the assessment of surface spread of flame for electrotechnical products and the materials from which they are formed.

Fire hazard testing - Part 9-1: Surface spread of flame - General guidance

BS EN 60695-9-1:2005 火灾测试.第9-1部分:火焰的表面蔓延.通用指南

This part of IEC 60695 provides guidance for the assessment of surface spread of flame for electrotechnical products and the materials from which they are formed. One of the responsibilities of a technical committee is, wherever applicable, to make use of basic safety publications in the preparation of its publications.

Fire hazard testing - Part 9-1: Surface spread of flame - General guidance

BS EN 60695-9-1:2006 着火危险试验 火焰的表面扩展 通用指南

Fire hazard testing. Surface spread of flame. General guidance

NF C20-924-9-1:2006 着火危险试验.第9-1部分:火焰的表面扩展.通用指南

Fire hazard testing - Part 9-1 : surface spread of flame - General guidance.

IEC 60695-11-2/COR1:2006 着火危险试验.第11-2部分:试验火焰.1KW标称预混合型火焰.设备、验证试验方法和指南.勘误1

This standard is Fire hazard testing - Part 11-2: Test flames - 1 kW nominal pre-mixed flame - Apparatus, confirmatory test arrangement and guidance; Corrigendum 1.

Fire hazard testing - Part 11-2: Test flames - 1 kW nominal pre-mixed flame - Apparatus, confirmatory test arrangement and guidance; Corrigendum 1

IEC 60695-10-2/COR1:2006 着火危险试验.第10-2部分:异常热.球压试验.勘误1

This standard is Fire hazard testing - Part 10-2: Abnormal heat; Ball pressure test; Corrigendum 1.

Fire hazard testing - Part 10-2: Abnormal heat; Ball pressure test; Corrigendum 1

BS EN 60695-6-1:2005+A1:2010 着火危险试验.烟雾遮蔽.一般指导

This part of IEC 60695 gives guidance on: a) optical measurement of smoke obscuration; b) general aspects of optical smoke test methods; c) consideration of test methods; d) expression of smoke test data; e) relevance of optical smoke data to hazard assessment. One of the responsibilities of a technical committee is, wherever applicable, to make use of basic safety publications in the preparation of its publications.

Fire hazard testing. Smoke obscuration. General guidance