13.340.10 防护服装 标准查询与下载

T/ZZB 2955-2022 日常用高可视性服装

本文件规定了日常用高可视性服装的术语和定义、号型、分类、基本要求、技术要求、试验方法、检验规则、标志、包装、运输及贮存、使用说明、质量承诺。 本文件适用于以纺织织物为主要原料生产的，在日常生活中为提升其视觉可见性而穿着的服装。 本文件不适用于 36 个月及以下的婴幼儿服装。 本文件不适用于职业用高可视性警示服。

High visibility clothing for daily use

ASTM F1458-15(2022) 脚保护装置电锯切割阻力测量的标准试验方法

1.1 This test method measures cut resistance of foot protective devices that are designed to protect the foot when operating a chainsaw. 1.2 This test method may be used to test for compliance to minimum performance requirements in established safety standards. 1.2.1 By agreement between the purchaser and the supplier, or as required by established safety standards, this test method can be used to determine any one or both of the following: (1) chain speed 50 (CS50), (2) success/failure (jamming/chain stop) at specified chain speed. 1.3 This test method may be used to determine levels of protection for areas of coverage as stipulated in established safety standards. 1.4 The values stated in SI units are to be regarded as standard. NOTE 1—The values stated in each system may not be exact equivalents; therefore, each system must be used independently of the other, without combining values in any way. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Measurement of Cut Resistance to Chainsaw of Foot Protective Devices

ASTM F2320-18(2022) 橡胶绝缘薄板标准规范

1.1 This specification covers testing of rubber insulating sheeting for use as a covering for the protection of workers from accidental contact with live electrical conductors, apparatus, or circuits. 1.2 Two types of sheeting, differing in chemical and physical characteristics, are provided and are designated as Type I, non-resistant to ozone and Type II, resistant to ozone. 1.3 Three classes of sheeting, differing in electrical protection characteristics are provided and designated as Class 00, Class 0, and Class 1. 1.4 Two styles of sheeting, differing in construction characteristics, are provided and are designated as Style A and Style B. 1.5 The follow safety hazards caveat applies only to the test method portion, Sections 17 – 19, of this specification. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. NOTE 1—Rubber Insulating Sheeting should remain flexible for use through normal temperature ranges. NOTE 2—Rubber as used in this specification is a generic term that includes elastomers and elastomeric compounds, regardless of origin. 1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Rubber Insulating Sheeting

T/NSSQ 009-2022 胃幽门螺旋杆菌吹气袋装置及应用规范

本文件规定了胃幽门螺旋杆菌吹气袋装置及应用规范的术语和定义，并对包括采样方式、采样过程等进行规范。

Gastric Helicobacter pylori air bag device and application specification

KS K ISO 11612-2022 防护服.防热和防火服.最低性能要求

Protective clothing — Clothing to protect against heat and flame — Minimum performance requirements

KS K ISO 27065-2022 防护服.使用杀虫剂的操作员和重返工作人员所穿防护服的性能要求

Protective clothing — Performance requirements for protective clothing worn by operators applying pesticides and for re-entry workers

KS G 7202-2022 职业健康防护靴

Protective boots for occupational health

KS K ISO 16602-2022 化学品防护服.分类、标签和性能要求

Protective clothing for protection against chemicals — Classification, labelling and performance requirements

KS K ISO 11612:2022 防护服.防热和防火服.最低性能要求

Protective clothing — Clothing to protect against heat and flame — Minimum performance requirements

KS K ISO 27065:2022 防护服.使用杀虫剂的操作员和重返工作人员所穿防护服的性能要求

Protective clothing — Performance requirements for protective clothing worn by operators applying pesticides and for re-entry workers

KS K ISO 16602:2022 化学品防护服.分类、标签和性能要求

Protective clothing for protection against chemicals — Classification, labelling and performance requirements

T/ZFB 0017-2022 工业用阻燃防静电服

阻燃防静电服的术语和定义、技术要求、试验方法、检验规则、标识、包装和存储 技术要求包括以下方面： 号型及规格 结构 缝制 外观质量 内在质量

Flame retardant and static protective clothing for industrial applications

ASTM E1549/E1549M-13(2022) 航天器用于非危险和危险操作的洁净室和受控环境中所需的ESD控制服装标准规范

1.1 This document specifies special items of clothing (cleanroom garments) designed to protect aerospace products from electrostatic discharge and from contaminants released by personnel and garments. Special clothing includes low linting coveralls, footwear, and head covers. 1.2 The function of cleanroom garments is to contain the contaminants generated by people and to minimize contaminants from the garments. 1.3 Two types of fabrics can be selected for the garments. Both types are inherently static-dissipative materials to prevent electrical discharges that can damage sensitive hardware or initiate explosions in the presence of flammable vapors. The material specified for “hazardous environments” is flame resistant and provides additional protection to the wearer. Selection of garment design and fabric should be based on the user’s needs with respect to functional and environmental requirements. 1.4 Additional background information can be found in SD-TR-91-26 and IEST-RP-CC003.3. 1.5 This standard is intended to be in compliance with the ASTM policy on Fire Standards.2 Flammability tests specified in this standard should be used to measure and describe the properties of fabrics in response to heat and flame under controlled laboratory conditions and should not be used to describe or appraise the fabrics under actual fire conditions. However, results of the tests may be used as elements of a fire risk assessment which takes into account all of the factors which are pertinent to an assessment of the fire hazard of operations in controlled environment areas. 1.6 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. 1.7 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.8 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for ESD Controlled Garments Required in Cleanrooms and Controlled Environments for Spacecraft for Non-Hazardous and Hazardous Operations

ISO/CD 6529 防护服—化学品防护—防护服材料耐液体和气体渗透性的测定

Protective clothing — Protection against chemicals — Determination of resistance of protective clothing materials to permeation by liquids and gases

ISO/FDIS 13997 防护服《机械性能》《耐尖锐物切割性能的测定》

Protective clothing — Mechanical properties — Determination of resistance to cutting by sharp objects

ISO/CD 11612 防护服 防热和防火的服装 最低性能要求

Protective clothing — Clothing to protect against heat and flame — Minimum performance requirements

ISO/FDIS 11611 用于焊接和相关工艺的防护服

Protective clothing for use in welding and allied processes

ISO/CD 11999-3 消防员的 PPE 对在建筑物中发生火灾时有暴露于高热和/或火焰风险的消防员使用的 PPE 的测试方法和要求 第3部分：服装

PPE for firefighters — Test methods and requirements for PPE used by firefighters who are at risk of exposure to high levels of heat and/or flame while fighting fires occurring in structures — Part 3: Clothing

ISO/CD 11999-4 消防员的 PPE 对在建筑物中发生火灾时有暴露于高热和/或火焰风险的消防员使用的 PPE 的测试方法和要求 第4部分：手套

PPE for firefighters — Test methods and requirements for PPE used by firefighters who are at risk of exposure to high levels of heat and/or flame while fighting fires occurring in structures — Part 4: Gloves

ISO/DIS 13506-2 耐热防火防护服《第2部分：皮肤烧伤预测》计算要求及试验用例

Protective clothing against heat and flame — Part 2: Skin burn injury prediction — Calculation requirements and test cases