13.340.40 防护手套 标准查询与下载

BS EN 13594:2002 专业摩托车驾驶者用防护手套.要求和试验方法

This European Standard applies to protective professional motorcycle riders gloves for use while riding motorcycles for on-road activities. It specifies the requirements for the sizing, ergonomic characteristics, mechanical properties, cleaning, marking and information for users. It also describes the appropriate test methods whereby conformity against these requirements can be assessed.

Protective gloves for professional motorcycle riders - Requirements and test methods

DS/EN 12477:2002 焊工防护手套

This European Standard specifies requirements and test methods for protective gloves for use in manual metal welding, cutting and allied processes. Protective gloves for welders protect the hands during the process of welding and related tasks.

Protective gloves for welders

NF S75-509*NF EN 12477:2002 焊工用防护手套

Protective gloves for welders.

BS EN 12477:2001 焊工用防护手套

This European Standard specifies requirements and test methods for protective gloves for use in manual metal welding, cutting and allied processes. Protective gloves for welders protect the hands and the wrists during the process of welding and related tasks. Protective gloves for welders protect against small splashes of molten metal, short contact exposure to limited flame, convective heat and contact heat and U.V. radiation from the arc. !The glove’s material provides minimum electrical resistance up to 100V (DC) for arc welding." Besides, they protect against mechanical aggressions. !WARNING: It is not meant to bring any protection in case of defective or wrong use of the welding equipment. It does not qualify the glove for protection against electrical shock where protective gloves designed according to EN 60903 shall be used." According to their performance, protective gloves for welders are classified into two types: - type A: lower dexterity (with higher other performance), - type B: higher dexterity (with lower other performance). Protective gloves for special welding processes are outside the scope of this standard.

Protective gloves for welders

ISO 15383:2001 消防员用防护手套 实验室试验法和性能要求

This International Standard specifies test methods and minimum requirements for protective gloves to be worn during fire fighting and associated activities where there is a risk of heat and/or flame. The purpose of this International Standard is to provide minimum performance requirements for protective gloves designed to protect against injury in fire fighting operations. This International Standard covers the general glove design, the minimum performance levels of the materials used and the methods of test for determining these performance levels. With the exception of flame resistance and ergonomic requirements, this International Standard establishes three levels of performance for all other performance requirements. Type 3 gloves provide a higher level of thermal insulation and physical protection, and require liquid penetration resistance (including synthetic blood) as compared to Type 2 gloves. Type 1 gloves are intended to provide minimum requirements for gloves in any fire fighting application, such as for wildland fire fighting. Annex E provides a comparison of the performance requirements for all three glove types. This International Standard does not cover special gloves for use in other high risk situations such as specialized fire fighting. It does not cover protection for the head, torso, arms, legs and feet or protection of the hands against other hazards, e.g. chemical, biological, radiation and electrical hazards, except for limited, accidental exposure to fireground chemicals and contaminated blood or body fluids (Type 3 gloves). These aspects may be dealt with in other standards. Selection of the appropriate system of clothing, including gloves, is dependant on carrying out an effective risk assessment which identifies the hazards to be faced, evaluates the likelihood of those hazards and provides the means of reducing or eliminating these hazards. Guidelines for conducting a risk assessment and some factors for consideration are included in annex D.

Protective gloves for firefighters - Laboratory test methods and performance requirements

NP EN 50237-2000 用于电子工程当中带机械保护的手套

Gloves and mitts with mechanical protection for electrical purposes

EN 12477:2001 焊工防护手套.包含修改件A1-2005

This European Standard specifies requirements and test methods for protective gloves for use in manualmetal welding, cutting and allied processes.

Protective gloves for welders

BS EN 1082-3:2000 防护服.防止被手持刀具割伤和刺伤用的手套和手臂保护物.编织物、皮革和其它材料的冲击切割试验

This European Standard contains the specification for an impact cut test for use on fabric, leather and other materials.

Protective clothing - Gloves and arm guards protecting against cuts and stabs by hand knives - Impact cut test for fabric, leather and other materials

DS/EN 1082-3:2000 防护服 防止手刀割伤和刺伤的手套和护臂 第3部分：织物、皮革和其他材料的冲击切割试验

This European Standard contains the specification for an impact cut test for use on fabric, leather and other materials.

Protective clothing - Gloves and arm guards protecting against cuts and stabs by hand knives - Part 3: Impact cut test for fabric, leather and other materials

BS EN 1082-2:2000 防护服.防止刀切和割伤的手套和胳膊护套.链圈材料之外的其他材料制作的手套和胳膊护套

This European Standard specifies requirements for the design, cut resistance, penetration resistance, and ergonomic characteristics of cut resistant gloves, arm guards and protective sleeves which are made of materials other than chain mail, rigid metal and plastics, and provide less cut and stab protection than the products specified in part 1 of this standard and are intended to be used only in work where the knife is not finely pointed or it is used only to cut away from the hand and arm.

Protective clothing - Gloves and arm guards protecting against cuts and stabs by hand knives - Gloves and arm guards made of material other than chain mail

DIN EN 1082-2:2000 防护服.防止被手持刀具割伤和刺伤用的手套和手臂护套.第2部分:非链环铠甲式的手套和手臂护套

The document specifies requirements for the design, cut resistance, penetration resistance, and ergonomic characteristics of cut resistant gloves, arm guards and protective sleeves made of materials other than chain mail and rigid metal and plastics, and providing less cut and stab protection than the products specified in Part 1 of this Standard and are intended to be used only in work where the knife is not finely pointed or it is used only to cut away from the hand and arm.#,,#

Protective clothing - Gloves and arm guards protecting against cuts and stabs by hand knives - Part 2: Gloves and arm guards made of material other than chain mail; German version EN 1082-2:2000

DIN EN 1082-3:2000 防护服.防止匕首砍伤和扎伤的手套和胳膊护罩.第3部分:编织物、皮革和其它材料的冲击切割试验; 德文版本 EN 1082-3:2000

Protective clothing - Gloves and arm guards protecting against cuts and stabs by hand knives - Part 3: Impact cut test for fabric, leather and other materials; German version EN 1082-3:2000

DS/EN 1082-2:2000 防护服 防止手刀割伤和刺伤的手套和护臂 第2部分：由链甲以外的材料制成的手套和护臂

This European Standard specifies requirements for the design, cut resistance, penetration resistance, and ergonomic characteristics of cut resistant gloves, arm guards and sleeves made of materials other than chain mail and rigid metal and plastics, and providing less cut and stab protection than the products specified in Part 1 of this Standard.

Protective clothing - Gloves and arm guards protecting against cuts and stabs by hand knives - Part 2: Gloves and arm guards made of material other than chain mail

EN 1082-2:2000 防护服.防手工刀具砍中和刺中的手套和手臂防护物.第2部分:除链式盔甲外其它材料制作的手套和手臂防护物

The document specifies requirements forThe design, cut resistance, penetration resistance, and ergonomic characteristics of cut resistant gloves, arm guards and protective sleeves made of materials other than chain mail and rigid metal and plastics, and providing less cut and stab protection thanThe products specified in Part 1 of this standard and are intended to be used only in work whereThe knife is not finely pointed or it is used only to cut away fromThe hand and arm

Protective clothing - Gloves and arm guards protecting against cuts and stabs by hand knives - Part 2: Gloves and arm guards made of material other than chain mail

JIS L 4131:2000 工作手套

この規格は，成人用のニット製一般作業用の手袋(以下，作業手袋という。)について規定する。

Working gloves

NF S74-509-7:2000 手提式链锯用户防护服.第7部分:链锯防护手套的要求

Protective clothing for users of hand-held chainsaws - Part 7 : requirements for chainsaw protective gloves.

NF S74-509-4:2000 手提式链锯用户防护服.第4部分:链锯防护手套的试验方法

Protective clothing for users of hand-held chainsaws - Part 4 : ttest methods for chainsaw protective gloves.

DS/EN 381-4:2000 手持电锯使用者的防护服 第4部分：电锯防护手套的试验方法

This European Standard specifies the test specimens, pre-treatment and testing of gloves that are intended to provide protection against cuts by chainsaws. The method for measurement of protective coverage, the apparatus and the test method for assessing resistance to cutting, and the practical performance test for measuring the grip factor described in EN 381-7 are specified.

Protective clothing for users of hand-held chainsaws - Part 4: Test methods for chainsaw protective gloves

DS/EN 381-7:2000 手持电锯使用者的防护服 第7部分：电锯防护手套的要求

This European Standard specifies the requirements for gloves for resistance to cutting by a chainsaw when assessed by the test method described in EN 381-4. The requirements are also given for marking and for the provision of information to be supplied by the manufacturer including criteria for the selection of appropriate gloves and instruction for use.

Protective clothing for users of hand-held chainsaws - Part 7: Requirements for chainsaw protective gloves

BS EN 381-7:1999 手持式链锯使用者用防护服.链锯防护手套的要求

This European Standard specifies the requirements for gloves for resistance to cutting by a chainsaw when assessed by the test method described in EN 381-4. The requirements are also given for marking and for the provision of information to be supplied by the manufacturer including criteria for the selection of appropriate gloves, and instructions for use.

Protective clothing for users of hand-held chain saws - Requirements for chainsaw protective gloves